From 5a35f4d30e5c16bd85e811176cffa86b721112b7 Mon Sep 17 00:00:00 2001 From: Yuriy Andamasov Date: Sat, 2 May 2026 18:59:58 +0300 Subject: refactor(swap): rename imported .md files to md- prefix for swap mechanism MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Restore the canary file naming convention that swap_sources.py expects: the imported MyST pages now live as docs//md-.md alongside the existing docs//.rst, so swap_sources.py --swap can rename them into place at build time. - 254 .md files renamed (every page with a matching .rst counterpart) - 2 MyST-only pages left at their final names (no .rst exists, no swap needed): docs/copyright.md, docs/automation/terraform/terraformvyos.md All 114 stems listed in docs/_swap.txt now have a corresponding md-.md source file ready to swap in. 🤖 Generated by [robots](https://vyos.io) --- docs/configuration/protocols/arp.md | 72 - docs/configuration/protocols/babel.md | 296 ---- docs/configuration/protocols/bfd.md | 205 --- docs/configuration/protocols/bgp.md | 1414 ------------------ docs/configuration/protocols/failover.md | 237 --- docs/configuration/protocols/igmp-proxy.md | 79 - docs/configuration/protocols/index.md | 25 - docs/configuration/protocols/isis.md | 746 ---------- docs/configuration/protocols/md-arp.md | 72 + docs/configuration/protocols/md-babel.md | 296 ++++ docs/configuration/protocols/md-bfd.md | 205 +++ docs/configuration/protocols/md-bgp.md | 1414 ++++++++++++++++++ docs/configuration/protocols/md-failover.md | 237 +++ docs/configuration/protocols/md-igmp-proxy.md | 79 + docs/configuration/protocols/md-index.md | 25 + docs/configuration/protocols/md-isis.md | 746 ++++++++++ docs/configuration/protocols/md-mpls.md | 285 ++++ docs/configuration/protocols/md-multicast.md | 31 + docs/configuration/protocols/md-openfabric.md | 242 ++++ docs/configuration/protocols/md-ospf.md | 1504 ++++++++++++++++++++ docs/configuration/protocols/md-pim.md | 282 ++++ docs/configuration/protocols/md-pim6.md | 100 ++ docs/configuration/protocols/md-rip.md | 294 ++++ docs/configuration/protocols/md-rpki.md | 210 +++ docs/configuration/protocols/md-segment-routing.md | 359 +++++ docs/configuration/protocols/md-static.md | 298 ++++ .../protocols/md-traffic-engineering.md | 54 + docs/configuration/protocols/mpls.md | 285 ---- docs/configuration/protocols/multicast.md | 31 - docs/configuration/protocols/openfabric.md | 242 ---- docs/configuration/protocols/ospf.md | 1504 -------------------- docs/configuration/protocols/pim.md | 282 ---- docs/configuration/protocols/pim6.md | 100 -- docs/configuration/protocols/rip.md | 294 ---- docs/configuration/protocols/rpki.md | 210 --- docs/configuration/protocols/segment-routing.md | 359 ----- docs/configuration/protocols/static.md | 298 ---- .../configuration/protocols/traffic-engineering.md | 54 - 38 files changed, 6733 insertions(+), 6733 deletions(-) delete mode 100644 docs/configuration/protocols/arp.md delete mode 100644 docs/configuration/protocols/babel.md delete mode 100644 docs/configuration/protocols/bfd.md delete mode 100644 docs/configuration/protocols/bgp.md delete mode 100644 docs/configuration/protocols/failover.md delete mode 100644 docs/configuration/protocols/igmp-proxy.md delete mode 100644 docs/configuration/protocols/index.md delete mode 100644 docs/configuration/protocols/isis.md create mode 100644 docs/configuration/protocols/md-arp.md create mode 100644 docs/configuration/protocols/md-babel.md create mode 100644 docs/configuration/protocols/md-bfd.md create mode 100644 docs/configuration/protocols/md-bgp.md create mode 100644 docs/configuration/protocols/md-failover.md create mode 100644 docs/configuration/protocols/md-igmp-proxy.md create mode 100644 docs/configuration/protocols/md-index.md create mode 100644 docs/configuration/protocols/md-isis.md create mode 100644 docs/configuration/protocols/md-mpls.md create mode 100644 docs/configuration/protocols/md-multicast.md create mode 100644 docs/configuration/protocols/md-openfabric.md create mode 100644 docs/configuration/protocols/md-ospf.md create mode 100644 docs/configuration/protocols/md-pim.md create mode 100644 docs/configuration/protocols/md-pim6.md create mode 100644 docs/configuration/protocols/md-rip.md create mode 100644 docs/configuration/protocols/md-rpki.md create mode 100644 docs/configuration/protocols/md-segment-routing.md create mode 100644 docs/configuration/protocols/md-static.md create mode 100644 docs/configuration/protocols/md-traffic-engineering.md delete mode 100644 docs/configuration/protocols/mpls.md delete mode 100644 docs/configuration/protocols/multicast.md delete mode 100644 docs/configuration/protocols/openfabric.md delete mode 100644 docs/configuration/protocols/ospf.md delete mode 100644 docs/configuration/protocols/pim.md delete mode 100644 docs/configuration/protocols/pim6.md delete mode 100644 docs/configuration/protocols/rip.md delete mode 100644 docs/configuration/protocols/rpki.md delete mode 100644 docs/configuration/protocols/segment-routing.md delete mode 100644 docs/configuration/protocols/static.md delete mode 100644 docs/configuration/protocols/traffic-engineering.md (limited to 'docs/configuration/protocols') diff --git a/docs/configuration/protocols/arp.md b/docs/configuration/protocols/arp.md deleted file mode 100644 index 7d9bf4f9..00000000 --- a/docs/configuration/protocols/arp.md +++ /dev/null @@ -1,72 +0,0 @@ -```{eval-rst} -.. meta:: - :description: The Address Resolution Protocol (ARP) resolves - network-layer addresses to link-layer MAC addresses. - :keywords: arp, network, protocol, mac, address, ipv4, static -``` - -(routing_static_arp)= - -# ARP - -The {abbr}`ARP (Address Resolution Protocol)` resolves IPv4 network layer addresses -to link layer MAC addresses. -addresses. This mapping is essential for communication within the Internet -Protocol suite. ARP was standardized in 1982 by {rfc}`826` (STD 37). - -:::{note} -In Internet Protocol version 6 (IPv6) networks, address resolution is -performed by the Neighbor Discovery Protocol (NDP). -::: - -Use the following commands to configure or view ARP table entries. - -## Configuration - -```{eval-rst} -.. cfgcmd:: set protocols static arp interface address mac - - **Configure a static ARP entry on the specified interface.** - - This creates a permanent mapping between an IP address and a MAC address - on the specified interface. - - Example: - - .. code-block:: none - - set protocols static arp interface eth0 address 192.0.2.1 mac 01:23:45:67:89:01 -``` - -## Operation - -```{eval-rst} -.. opcmd:: show protocols static arp - - Show all ARP table entries across all interfaces. - - .. code-block:: none - - vyos@vyos:~$ show protocols static arp - Address HWtype HWaddress Flags Mask Iface - 10.1.1.1 ether 00:53:00:de:23:2e C eth1 - 10.1.1.100 ether 00:53:00:de:23:aa CM eth1 -``` - -```{eval-rst} -.. opcmd:: show protocols static arp interface - - Show all ARP table entries for the specific interface. - - Example for ``eth1``: - - .. code-block:: none - - vyos@vyos:~$ show protocols static arp interface eth1 - Address HWtype HWaddress Flags Mask Iface - 10.1.1.1 ether 00:53:00:de:23:2e C eth1 - 10.1.1.100 ether 00:53:00:de:23:aa CM eth1 -``` - -[arp]: https://en.wikipedia.org/wiki/Address_Resolution_Protocol - diff --git a/docs/configuration/protocols/babel.md b/docs/configuration/protocols/babel.md deleted file mode 100644 index b03e9fa4..00000000 --- a/docs/configuration/protocols/babel.md +++ /dev/null @@ -1,296 +0,0 @@ -```{eval-rst} -.. meta:: - :description: The Babel routing protocol provides robust and efficient - routing for wired and wireless mesh networks. - :keywords: babel, routing, protocol, wireless, mesh, network, metric, - ipv4, ipv6 -``` - -(babel)= - -# Babel - -The Babel protocol provides robust and efficient routing for both wired and -wireless mesh networks. By default, Babel uses hop-count metrics on wired links -and a variant of Expected Transmission Count (ETX) on wireless links. -Administrators can configure Babel to account for radio diversity, -automatically compute link latency, and include that latency in the routing -metric. {rfc}`8966` defines the Babel protocol. - -Babel is a dual-stack protocol. A single Babel instance routes both IPv4 and -IPv6 traffic simultaneously. - -## General configuration - -VyOS does not require a specific command to start the Babel process. The system -automatically starts the routing process when you configure the first -Babel-enabled interface. - -```{cfgcmd} set protocols babel interface \ - -**Enable Babel routing on the specified interface.** - -The system immediately begins sending and receiving Babel packets on this -interface. -``` - -## Optional configuration - -```{cfgcmd} set protocols babel parameters diversity - -**Enable radio-frequency diversity routing for the Babel process.** - -Enabling this feature is highly recommended for networks with many -wireless nodes. - -:::{note} -When you enable diversity routing, you should also configure the -``diversity-factor`` and ``channel`` parameters. -::: -``` - -```{cfgcmd} set protocols babel parameters diversity-factor \<1-256\> - -**Configure the multiplicative factor for diversity routing, in units of -1/256.** - -Lower multiplicative factors give greater weight to diversity in route -selection. The default value is 256, which disables diversity routing. -On nodes with multiple independent radios, configure a value of 128 or less. -``` - -```{cfgcmd} set protocols babel parameters resend-delay \<20-655340\> - -**Configure the delay in milliseconds before the system resends an -important request or update.** - -The default value is 2000 ms. -``` - -```{cfgcmd} set protocols babel parameters smoothing-half-life \<0-65534\> - -**Configure the time constant, in seconds, for the smoothing algorithm used -to implement hysteresis.** - -Higher values reduce route oscillation but slightly increase convergence -time. A value of 0 disables hysteresis and is suitable for wired networks. -The default is 4 seconds. -``` - -## Interfaces configuration - -```{cfgcmd} set protocols babel interface \ type \ - -**Configure the network type for the Babel-enabled interface.** - -Choose from the following: - -* ``auto``: Babel automatically detects if an interface is wired or - wireless. -* ``wired``: Babel enables optimizations for wired interfaces. -* ``wireless``: Babel disables optimizations suitable only for wired - interfaces. Specifying wireless is always correct, but may cause slower - convergence and increased routing traffic. -``` - -```{cfgcmd} set protocols babel interface \ split-horizon \ - -**Configure the split-horizon routing behavior for the specified -interface.** - -Use one of the following options: - -* ``default``: Babel automatically enables split-horizon on wired - interfaces and disables it on wireless interfaces. -* ``enable``: Babel enables split-horizon on the interface. This - optimization should be used only on symmetric, transitive (wired) - networks. -* ``disable``: Babel disables split-horizon on the interface. Disabling - split-horizon is always safe and correct. -``` - -```{cfgcmd} set protocols babel interface \ hello-interval \<20-655340\> - -**Configure the interval, in milliseconds, between scheduled hello messages -on the specified interface.** - -On wired links, Babel detects link failures within two hello intervals. -On wireless links, link quality is reestimated at each interval. The -default is 4000 ms. -``` - -```{cfgcmd} set protocols babel interface \ update-interval \<20-655340\> - -**Configure the interval, in milliseconds, between scheduled routing -updates on the specified interface.** - -Because Babel uses triggered updates extensively, you can increase this -value on reliable links with minimal packet loss. The default is 20000 ms. -``` - -```{cfgcmd} set protocols babel interface \ rxcost \<1-65534\> - -**Configure the base receive cost for the specified interface.** - -Babel applies this value based on the configured network type: - -* ``wired``: The value is the routing cost advertised to neighboring - routers. -* ``wireless``: The value is a multiplier used to compute the ETX - (Expected Transmission Count) reception cost. - -The default value is 256. -``` - -```{cfgcmd} set protocols babel interface \ rtt-decay \<1-256\> - -**Configure the decay factor for the exponential moving average of RTT -samples, in units of 1/256.** - -Higher values discard older samples faster. The default value is 42. -``` - -```{cfgcmd} set protocols babel interface \ rtt-min \<1-65535\> - -**Configure the minimum RTT, in milliseconds, at which the cost to a -neighbor begins to increase.** - -The additional cost is linear in (rtt - rtt-min). The default value is 10 ms. -``` - -```{cfgcmd} set protocols babel interface \ rtt-max \<1-65535\> - -**Configure the maximum RTT, in milliseconds, above which the cost to a -neighbor stops increasing.** - -The default value is 120 ms. -``` - -```{cfgcmd} set protocols babel interface \ max-rtt-penalty \<0-65535\> - -**Configure the maximum cost added to a neighbor when RTT meets or exceeds -rtt-max.** - -Setting this value to 0 disables RTT-based costs. The default value is 150. -``` - -```{cfgcmd} set protocols babel interface \ enable-timestamps - -**Configure adding timestamps to each Hello and IHU message to calculate -RTT values.** - -Enabling timestamps is recommended for tunnel interfaces. -``` - -```{cfgcmd} set protocols babel interface \ channel \<1-254|interfering|noninterfering\> - -**Configure the channel identifier that diversity routing uses for the -specified interface.** - -Interfaces interfere with each other based on the assigned channel -identifier: - -* ``1–254``: The interface interferes with interfaces sharing the same - channel number and with interfaces configured as ``interfering``. -* ``interfering``: The interface interferes with all others except those - configured as ``noninterfering``. -* ``noninterfering``: The interface interferes only with itself. -``` - -## Redistribution configuration - -```{cfgcmd} set protocols babel redistribute \ \ - -**Configure the redistribution of routing information from the specified -route source into the Babel process.** - -The following route sources are available: - -* **ipv4:** ``bgp``, ``connected``, ``eigrp``, ``isis``, ``kernel``, - ``nhrp``, ``ospf``, ``rip``, ``static`` -* **ipv6:** ``bgp``, ``connected``, ``eigrp``, ``isis``, ``kernel``, - ``nhrp``, ``ospfv3``, ``ripng``, ``static`` -``` - -```{cfgcmd} set protocols babel distribute-list \ access-list \ \ - -**Configure global Babel route filtering using an access list.** - -Specify the direction in which the access list is applied: - -* ``in``: Filters incoming routes. -* ``out``: Filters outgoing routes. -``` - -```{cfgcmd} set protocols babel distribute-list \ interface \ access-list \ \ - -**Configure Babel route filtering on the specified interface using an -access list.** - -Specify the direction in which the access list is applied: - -* ``in``: Filters incoming routes. -* ``out``: Filters outgoing routes. -``` - -```{cfgcmd} set protocols babel distribute-list \ prefix-list \ \ - -**Configure global Babel route filtering using a prefix list.** - -Specify the direction in which the prefix list is applied: - -* ``in``: Filters incoming routes. -* ``out``: Filters outgoing routes. -``` - -```{cfgcmd} set protocols babel distribute-list \ interface \ prefix-list \ \ - -**Configure Babel route filtering on the specified interface using a -prefix list.** - -Specify the direction in which the prefix list is applied: - -* ``in``: Filters incoming routes. -* ``out``: Filters outgoing routes. -``` - -## Configuration example - -### Basic two-node babel network - -**Goal:** The following example connects two routers (Node 1 and Node 2) via -their eth0 interfaces and uses the Babel routing protocol to advertise -(redistribute) each router's locally configured networks (represented by -loopback addresses) to one another. - -**Node 1:** - -```none -# Configure the loopback (local networks) and physical (eth0) addresses -set interfaces loopback lo address 10.1.1.1/32 -set interfaces loopback lo address fd12:3456:dead:beef::1/128 -set interfaces ethernet eth0 address 192.168.1.1/24 - -# Enable Babel on the physical link -set protocols babel interface eth0 type wired - -# Instruct Babel to advertise (redistribute) the locally configured networks -set protocols babel redistribute ipv4 connected -set protocols babel redistribute ipv6 connected -``` - -**Node 2:** - -```none -# Configure the loopback (local networks) and physical (eth0) addresses -set interfaces loopback lo address 10.2.2.2/32 -set interfaces loopback lo address fd12:3456:beef:dead::2/128 -set interfaces ethernet eth0 address 192.168.1.2/24 - -# Enable Babel on the physical link -set protocols babel interface eth0 type wired - -# Tell Babel to advertise (redistribute) the locally configured networks -set protocols babel redistribute ipv4 connected -set protocols babel redistribute ipv6 connected -``` diff --git a/docs/configuration/protocols/bfd.md b/docs/configuration/protocols/bfd.md deleted file mode 100644 index 59541abc..00000000 --- a/docs/configuration/protocols/bfd.md +++ /dev/null @@ -1,205 +0,0 @@ ---- -lastproofread: '2023-01-27' ---- - -```{include} /_include/need_improvement.txt -``` - -(routing-bfd)= - -# BFD - -{abbr}`BFD (Bidirectional Forwarding Detection)` is described and extended by -the following RFCs: {rfc}`5880`, {rfc}`5881` and {rfc}`5883`. - -In the age of very fast networks, a second of unreachability may equal millions of lost packets. -The idea behind BFD is to detect very quickly when a peer is down and take action extremely fast. - -BFD sends lots of small UDP packets very quickly to ensures that the peer is still alive. - -This allows avoiding the timers defined in BGP and OSPF protocol to expires. - -## Configure BFD - -```{cfgcmd} set protocols bfd peer \ - -Set BFD peer IPv4 address or IPv6 address -``` - -```{cfgcmd} set protocols bfd peer \ echo-mode - -Enables the echo transmission mode -``` - -```{cfgcmd} set protocols bfd peer \ multihop - -Allow this BFD peer to not be directly connected -``` - -```{cfgcmd} set protocols bfd peer \ source [address \ | interface \] - -Bind listener to specific interface/address, mandatory for IPv6 -``` - -```{cfgcmd} set protocols bfd peer \ interval echo-interval \<10-60000\> - -The minimal echo receive transmission interval that this system is -capable of handling -``` - -```{cfgcmd} set protocols bfd peer \ interval multiplier \<2-255\> - -Remote transmission interval will be multiplied by this value -``` - -```{cfgcmd} set protocols bfd peer \ interval [receive | transmit] \<10-60000\> - -Interval in milliseconds -``` - -```{cfgcmd} set protocols bfd peer \ shutdown - -Disable a BFD peer -``` - -```{cfgcmd} set protocols bfd peer \ minimum-ttl \<1-254\> - -For multi hop sessions only. Configure the minimum expected TTL for an -incoming BFD control packet. - -This feature serves the purpose of thightening the packet validation -requirements to avoid receiving BFD control packets from other sessions. -``` - -### Enable BFD in BGP - -```{cfgcmd} set protocols bgp neighbor \ bfd - -Enable BFD on a single BGP neighbor -``` - -```{cfgcmd} set protocols bgp peer-group \ bfd - -Enable BFD on a BGP peer group -``` - -### Enable BFD in OSPF - -```{cfgcmd} set protocols ospf interface \ bfd - - Enable BFD for OSPF on an interface - -``` - -```{cfgcmd} set protocols ospfv3 interface \ bfd - -Enable BFD for OSPFv3 on an interface -``` - -### Enable BFD in ISIS - -```{cfgcmd} set protocols isis \ interface \ bfd - -Enable BFD for ISIS on an interface - -``` - -## Operational Commands - -```{opcmd} show bfd peers - - Show all BFD peers - - :::{code-block} none - BFD Peers: - peer 198.51.100.33 vrf default interface eth4.100 - ID: 4182341893 - Remote ID: 12678929647 - Status: up - Uptime: 1 month(s), 16 hour(s), 29 minute(s), 38 second(s) - Diagnostics: ok - Remote diagnostics: ok - Local timers: - Receive interval: 300ms - Transmission interval: 300ms - Echo transmission interval: 50ms - Remote timers: - Receive interval: 300ms - Transmission interval: 300ms - Echo transmission interval: 0ms - - peer 198.51.100.55 vrf default interface eth4.101 - ID: 4618932327 - Remote ID: 3312345688 - Status: up - Uptime: 20 hour(s), 16 minute(s), 19 second(s) - Diagnostics: ok - Remote diagnostics: ok - Local timers: - Receive interval: 300ms - Transmission interval: 300ms - Echo transmission interval: 50ms - Remote timers: - Receive interval: 300ms - Transmission interval: 300ms - Echo transmission interval: 0ms - ::: -``` - -## BFD Static Route Monitoring - - -A monitored static route conditions the installation to the RIB on the BFD -session running state: when BFD session is up the route is installed to RIB, -but when the BFD session is down it is removed from the RIB. - - -### Configuration - -```{cfgcmd} set protocols static route \ next-hop \ bfd profile \ - -Configure a static route for \ using gateway \ -and use the gateway address as BFD peer destination address. -``` - -```{cfgcmd} set protocols static route \ next-hop \ bfd multi-hop source \ profile \ - -Configure a static route for \ using gateway \, -use source address to indentify the peer when is multi-hop session -and the gateway address as BFD peer destination address. -``` - -```{cfgcmd} set protocols static route6 \ next-hop \ bfd profile \ - -Configure a static route for \ using gateway \ -and use the gateway address as BFD peer destination address. -``` - -```{cfgcmd} set protocols static route6 \ next-hop \ bfd multi-hop source \ profile \ - -Configure a static route for \ using gateway \, -use source address to indentify the peer when is multi-hop session -and the gateway address as BFD peer destination address. -``` - -(bfd-operational-commands)= - -## Operational Commands - -```{opcmd} show bfd static routes - -Showing BFD monitored static routes - -:::{code-block} none -Showing BFD monitored static routes: - - Next hops: - VRF default IPv4 Unicast: - 10.10.13.3/32 peer 192.168.2.3 (status: installed) - 172.16.10.3/32 peer 192.168.10.1 (status: uninstalled) - - VRF default IPv4 Multicast: - - VRF default IPv6 Unicast: -::: -``` \ No newline at end of file diff --git a/docs/configuration/protocols/bgp.md b/docs/configuration/protocols/bgp.md deleted file mode 100644 index 0af79f6e..00000000 --- a/docs/configuration/protocols/bgp.md +++ /dev/null @@ -1,1414 +0,0 @@ -(routing-bgp)= - -# BGP - -{abbr}`BGP (Border Gateway Protocol)` is one of the Exterior Gateway Protocols -and the de facto standard interdomain routing protocol. The latest BGP version -is 4. BGP-4 is described in {rfc}`1771` and updated by {rfc}`4271`. {rfc}`2858` -adds multiprotocol support to BGP. - -VyOS makes use of {abbr}`FRR (Free Range Routing)` and we would like to thank -them for their effort! - -## Basic Concepts - -(bgp-autonomous-systems)= - -### Autonomous Systems - -From {rfc}`1930`: - -> An AS is a connected group of one or more IP prefixes run by one or more -> network operators which has a SINGLE and CLEARLY DEFINED routing policy. - -Each {abbr}`AS (Autonomous System)` has an identifying number associated with it -called an {abbr}`ASN (Autonomous System Number)`. This is a two octet value -ranging in value from 1 to 65535. The AS numbers 64512 through 65535 are defined -as private AS numbers. Private AS numbers must not be advertised on the global -Internet. The 2-byte AS number range has been exhausted. 4-byte AS numbers are -specified in {rfc}`6793`, and provide a pool of 4294967296 AS numbers. - -The {abbr}`ASN (Autonomous System Number)` is one of the essential elements of -BGP. BGP is a distance vector routing protocol, and the AS-Path framework -provides distance vector metric and loop detection to BGP. - -```{cfgcmd} set protocols bgp system-as \ - -Set local {abbr}`ASN (Autonomous System Number)` that this router represents. -This is a a mandatory option! -``` - -(bgp-address-families)= - - -### Address Families - - -Multiprotocol extensions enable BGP to carry routing information for multiple -network layer protocols. BGP supports an Address Family Identifier (AFI) for -IPv4 and IPv6. - - -(bgp-route-selection)= - - -### Route Selection - - -The route selection process used by FRR's BGP implementation uses the following -decision criterion, starting at the top of the list and going towards the -bottom until one of the factors can be used. - - -01. **Weight check** - - - Prefer higher local weight routes to lower routes. - - -02. **Local preference check** - - - Prefer higher local preference routes to lower. - - -03. **Local route check** - - - Prefer local routes (statics, aggregates, redistributed) to received routes. - - -04. **AS path length check** - - - Prefer shortest hop-count AS_PATHs. - - -05. **Origin check** - - - Prefer the lowest origin type route. That is, prefer IGP origin routes to - EGP, to Incomplete routes. - - -06. **MED check** - - - Where routes with a MED were received from the same AS, prefer the route - with the lowest MED. - - -07. **External check** - - - Prefer the route received from an external, eBGP peer over routes received - from other types of peers. - - -08. **IGP cost check** - - - Prefer the route with the lower IGP cost. - - -09. **Multi-path check** - - - If multi-pathing is enabled, then check whether the routes not yet - distinguished in preference may be considered equal. If - {cfgcmd}`bgp bestpath as-path multipath-relax` is set, all such routes are - considered equal, otherwise routes received via iBGP with identical AS_PATHs - or routes received from eBGP neighbours in the same AS are considered equal. - - -10. **Already-selected external check** - - - Where both routes were received from eBGP peers, then prefer the route - which is already selected. Note that this check is not applied if - {cfgcmd}`bgp bestpath compare-routerid` is configured. This check can - prevent some cases of oscillation. - - -11. **Router-ID check** - - - Prefer the route with the lowest router-ID. If the route has an - ORIGINATOR_ID attribute, through iBGP reflection, then that router ID is - used, otherwise the router-ID of the peer the route was received from is - used. - - -12. **Cluster-List length check** - - - The route with the shortest cluster-list length is used. The cluster-list - reflects the iBGP reflection path the route has taken. - - -13. **Peer address** - - - Prefer the route received from the peer with the higher transport layer - address, as a last-resort tie-breaker. - - -(bgp-capability-negotiation)= - - -### Capability Negotiation - - -When adding IPv6 routing information exchange feature to BGP. There were some -proposals. {abbr}`IETF (Internet Engineering Task Force)` -{abbr}`IDR (Inter Domain Routing)` adopted a proposal called Multiprotocol -Extension for BGP. The specification is described in {rfc}`2283`. The protocol -does not define new protocols. It defines new attributes to existing BGP. When -it is used exchanging IPv6 routing information it is called BGP-4+. When it is -used for exchanging multicast routing information it is called MBGP. - - -*bgpd* supports Multiprotocol Extension for BGP. So if a remote peer supports -the protocol, *bgpd* can exchange IPv6 and/or multicast routing information. - - -Traditional BGP did not have the feature to detect a remote peer's -capabilities, e.g. whether it can handle prefix types other than IPv4 unicast -routes. This was a big problem using Multiprotocol Extension for BGP in an -operational network. {rfc}`2842` adopted a feature called Capability -Negotiation. *bgpd* use this Capability Negotiation to detect the remote peer's -capabilities. If a peer is only configured as an IPv4 unicast neighbor, *bgpd* -does not send these Capability Negotiation packets (at least not unless other -optional BGP features require capability negotiation). - - -By default, FRR will bring up peering with minimal common capability for the -both sides. For example, if the local router has unicast and multicast -capabilities and the remote router only has unicast capability the local router -will establish the connection with unicast only capability. When there are no -common capabilities, FRR sends Unsupported Capability error and then resets the -connection. - - -## Configuration - - -(bgp-router-configuration)= - - -### BGP Router Configuration - - -First of all you must configure BGP router with the {abbr}`ASN (Autonomous -System Number)`. The AS number is an identifier for the autonomous system. -The BGP protocol uses the AS number for detecting whether the BGP connection -is internal or external. VyOS does not have a special command to start the BGP -process. The BGP process starts when the first neighbor is configured. - -```{cfgcmd} set protocols bgp system-as \ - -Set local autonomous system number that this router represents. This is a -mandatory option! -``` - -#### Peers Configuration - - -##### Defining Peers - -```{cfgcmd} set protocols bgp neighbor \ remote-as \ - -This command creates a new neighbor whose remote-as is \. The neighbor -address can be an IPv4 address or an IPv6 address or an interface to use -for the connection. The command is applicable for peer and peer group. -``` - - -```{cfgcmd} set protocols bgp neighbor \ remote-as internal - -Create a peer as you would when you specify an ASN, except that if the -peers ASN is different than mine as specified under the {cfgcmd}`protocols -bgp ` command the connection will be denied. -``` - - -```{cfgcmd} set protocols bgp neighbor \ remote-as external - -Create a peer as you would when you specify an ASN, except that if the -peers ASN is the same as mine as specified under the {cfgcmd}`protocols -bgp ` command the connection will be denied. -``` - - -```{cfgcmd} set protocols bgp neighbor \ remote-as auto - -Create a peer as you would when you specify an ASN, except that the peers -remote ASN is detected automatically from the OPEN message. -``` - - -```{cfgcmd} set protocols bgp neighbor \ local-role \ [strict] - -BGP roles are defined in RFC {rfc}`9234` and provide an easy way to -add route leak prevention, detection and mitigation. The local Role -value is negotiated with the new BGP Role capability which has a -built-in check of the corresponding value. In case of a mismatch the -new OPEN Roles Mismatch Notification <2, 11> would be sent. -The correct Role pairs are: - -Provider - Customer - -Peer - Peer - -RS-Server - RS-Client - -If {cfgcmd}`strict` is set the BGP session won’t become established -until the BGP neighbor sets local Role on its side. This -configuration parameter is defined in RFC {rfc}`9234` and is used to -enforce the corresponding configuration at your counter-parts side. - -Routes that are sent from provider, rs-server, or the peer local-role -(or if received by customer, rs-client, or the peer local-role) will -be marked with a new Only to Customer (OTC) attribute. - -Routes with this attribute can only be sent to your neighbor if your -local-role is provider or rs-server. Routes with this attribute can -be received only if your local-role is customer or rs-client. - -In case of peer-peer relationship routes can be received only if OTC -value is equal to your neighbor AS number. - -All these rules with OTC will help to detect and mitigate route leaks -and happen automatically if local-role is set. -``` - - -```{cfgcmd} set protocols bgp neighbor \ shutdown - -This command disable the peer or peer group. To reenable the peer use -the delete form of this command. -``` - - -```{cfgcmd} set protocols bgp neighbor \ description \ - -Set description of the peer or peer group. -``` - - -```{cfgcmd} set protocols bgp neighbor \ update-source \ - -Specify the IPv4 source address to use for the BGP session to this neighbor, -may be specified as either an IPv4 address directly or as an interface name. -``` - -(bgp-capability-negotiation-1)= - - -##### Capability Negotiation - -```{cfgcmd} set protocols bgp neighbor \ capability dynamic - -This command would allow the dynamic update of capabilities over an -established BGP session. -``` - - -```{cfgcmd} set protocols bgp neighbor \ capability extended-nexthop - -Allow bgp to negotiate the extended-nexthop capability with it’s peer. -If you are peering over a IPv6 Link-Local address then this capability -is turned on automatically. If you are peering over a IPv6 Global Address -then turning on this command will allow BGP to install IPv4 routes with -IPv6 nexthops if you do not have IPv4 configured on interfaces. -``` - - -```{cfgcmd} set protocols bgp neighbor \ disable-capability-negotiation - -Suppress sending Capability Negotiation as OPEN message optional -parameter to the peer. This command only affects the peer is -configured other than IPv4 unicast configuration. - -When remote peer does not have capability negotiation feature, -remote peer will not send any capabilities at all. In that case, -bgp configures the peer with configured capabilities. - -You may prefer locally configured capabilities more than the negotiated -capabilities even though remote peer sends capabilities. If the peer is -configured by {cfgcmd}`override-capability`, VyOS ignores received -capabilities then override negotiated capabilities with configured values. - -Additionally you should keep in mind that this feature fundamentally -disables the ability to use widely deployed BGP features. BGP unnumbered, -hostname support, AS4, Addpath, Route Refresh, ORF, Dynamic Capabilities, -and graceful restart. -``` - - -```{cfgcmd} set protocols bgp neighbor \ override-capability - -This command allow override the result of Capability Negotiation with -local configuration. Ignore remote peer’s capability value. -``` - - -```{cfgcmd} set protocols bgp neighbor \ strict-capability-match - -This command forces strictly compare remote capabilities and local -capabilities. If capabilities are different, send Unsupported Capability -error then reset connection. - -You may want to disable sending Capability Negotiation OPEN message -optional parameter to the peer when remote peer does not implement -Capability Negotiation. Please use {cfgcmd}`disable-capability-negotiation` -command to disable the feature. -``` - -##### Peer Parameters - -```{cfgcmd} set protocols bgp neighbor \ address-family \ allowas-in number \ - -This command accept incoming routes with AS path containing AS -number with the same value as the current system AS. This is -used when you want to use the same AS number in your sites, -but you can’t connect them directly. - - The number parameter (1-10) configures the amount of accepted - occurences of the system AS number in AS path. - - This command is only allowed for eBGP peers. It is not applicable - for peer groups. -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ as-override - -This command override AS number of the originating router with -the local AS number. - -Usually this configuration is used in PEs (Provider Edge) to -replace the incoming customer AS number so the connected CE ( -Customer Edge) can use the same AS number as the other customer -sites. This allows customers of the provider network to use the -same AS number across their sites. - -This command is only allowed for eBGP peers. -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ attribute-unchanged \ - -This command specifies attributes to be left unchanged for -advertisements sent to a peer or peer group. -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ maximum-prefix \ - -This command specifies a maximum number of prefixes we can receive -from a given peer. If this number is exceeded, the BGP session -will be destroyed. The number range is 1 to 4294967295. -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ nexthop-self - -This command forces the BGP speaker to report itself as the -next hop for an advertised route it advertised to a neighbor. -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ remove-private-as - -This command removes the private ASN of routes that are advertised -to the configured peer. It removes only private ASNs on routes -advertised to EBGP peers. - -If the AS-Path for the route has only private ASNs, the private -ASNs are removed. - -If the AS-Path for the route has a private ASN between public -ASNs, it is assumed that this is a design choice, and the -private ASN is not removed. -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ soft-reconfiguration inbound - -Changes in BGP policies require the BGP session to be cleared. Clearing has a -large negative impact on network operations. Soft reconfiguration enables you -to generate inbound updates from a neighbor, change and activate BGP policies -without clearing the BGP session. - -This command specifies that route updates received from this neighbor will be -stored unmodified, regardless of the inbound policy. When inbound soft -reconfiguration is enabled, the stored updates are processed by the new -policy configuration to create new inbound updates. - -:::{note} -Storage of route updates uses memory. If you enable soft -reconfiguration inbound for multiple neighbors, the amount of memory used -can become significant. -::: -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ weight \ - -This command specifies a default weight value for the neighbor’s -routes. The number range is 1 to 65535. -``` - - -```{cfgcmd} set protocols bgp neighbor \ advertisement-interval \ - -This command specifies the minimum route advertisement interval for -the peer. The interval value is 0 to 600 seconds, with the default -advertisement interval being 0. -``` - - -```{cfgcmd} set protocols bgp neighbor \ disable-connected-check - -This command allows peerings between directly connected eBGP peers -using loopback addresses without adjusting the default TTL of 1. -``` - - -```{cfgcmd} set protocols bgp neighbor \ disable-send-community \ - -This command specifies that the community attribute should not be sent -in route updates to a peer. By default community attribute is sent. -``` - - -```{cfgcmd} set protocols bgp neighbor \ ebgp-multihop \ - -This command allows sessions to be established with eBGP neighbors -when they are multiple hops away. When the neighbor is not directly -connected and this knob is not enabled, the session will not establish. -The number of hops range is 1 to 255. This command is mutually -exclusive with {cfgcmd}`ttl-security hops`. -``` - - -```{cfgcmd} set protocols bgp neighbor \ local-as \ [no-prepend] [replace-as] - -Specify an alternate AS for this BGP process when interacting with -the specified peer or peer group. With no modifiers, the specified -local-as is prepended to the received AS_PATH when receiving routing -updates from the peer, and prepended to the outgoing AS_PATH (after -the process local AS) when transmitting local routes to the peer. - -If the {cfgcmd}`no-prepend` attribute is specified, then the supplied -local-as is not prepended to the received AS_PATH. - -If the {cfgcmd}`replace-as` attribute is specified, then only the supplied -local-as is prepended to the AS_PATH when transmitting local-route -updates to this peer. - -:::{note} -This command is only allowed for eBGP peers. -::: -``` - - -```{cfgcmd} set protocols bgp neighbor \ passive - -Configures the BGP speaker so that it only accepts inbound connections -from, but does not initiate outbound connections to the peer or peer group. -``` - - -```{cfgcmd} set protocols bgp neighbor \ password \ - -This command specifies a MD5 password to be used with the tcp socket that -is being used to connect to the remote peer. -``` - - -```{cfgcmd} set protocols bgp neighbor \ ttl-security hops \ - -This command enforces Generalized TTL Security Mechanism (GTSM), -as specified in {rfc}`5082`. With this command, only neighbors -that are specified number of hops away will be allowed to -become neighbors. The number of hops range is 1 to 254. This -command is mutually exclusive with {cfgcmd}`ebgp-multihop`. -``` - -##### Peer Groups - -Peer groups are used to help improve scaling by generating the same update -information to all members of a peer group. Note that this means that the -routes generated by a member of a peer group will be sent back to that -originating peer with the originator identifier attribute set to indicated -the originating peer. All peers not associated with a specific peer group -are treated as belonging to a default peer group, and will share updates. - -```{cfgcmd} set protocols bgp peer-group \ - - This command defines a new peer group. You can specify to the group the same - parameters that you can specify for specific neighbors. - - :::{note} - If you apply a parameter to an individual neighbor IP address, you - override the action defined for a peer group that includes that IP - address. - ::: -``` - - -```{cfgcmd} set protocols bgp neighbor \ peer-group \ - -This command bind specific peer to peer group with a given name. -``` - -#### Network Advertisement Configuration - -```{cfgcmd} set protocols bgp address-family \ network \ - -This command is used for advertising IPv4 or IPv6 networks. - - :::{note} - By default, the BGP prefix is advertised even if it's not present - in the routing table. This behaviour differs from the implementation of - some vendors. - ::: -``` - - -```{cfgcmd} set protocols bgp parameters network-import-check - -This configuration modifies the behavior of the network statement. If you -have this configured the underlying network must exist in the routing table. -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ default-originate [route-map \] - -By default, VyOS does not advertise a default route (0.0.0.0/0) even if it is -in routing table. When you want to announce default routes to the peer, use -this command. Using optional argument {cfgcmd}`route-map` you can inject the -default route to given neighbor only if the conditions in the route map are -met. -``` - -#### Route Aggregation Configuration - -```{cfgcmd} set protocols bgp address-family \ aggregate-address \ - -This command specifies an aggregate address. The router will also -announce longer-prefixes inside of the aggregate address. -``` - - -```{cfgcmd} set protocols bgp address-family \ aggregate-address \ as-set - -This command specifies an aggregate address with a mathematical set of -autonomous systems. This command summarizes the AS_PATH attributes of -all the individual routes. -``` - - -```{cfgcmd} set protocols bgp address-family \ aggregate-address \ summary-only - -This command specifies an aggregate address and provides that -longer-prefixes inside of the aggregate address are suppressed -before sending BGP updates out to peers. -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ unsuppress-map \ - -This command applies route-map to selectively unsuppress prefixes -suppressed by summarisation. -``` - -#### Redistribution Configuration - -```{cfgcmd} set protocols bgp address-family \ redistribute - -This command redistributes routing information from the given route source -to the BGP process. There are six modes available for route source: -connected, kernel, ospf, rip, static, table. -``` - - -```{cfgcmd} set protocols bgp address-family \ redistribute metric \ - -This command specifies metric (MED) for redistributed routes. The -metric range is 0 to 4294967295. There are six modes available for -route source: connected, kernel, ospf, rip, static, table. -``` - - -```{cfgcmd} set protocols bgp address-family \ redistribute route-map \ - -This command allows to use route map to filter redistributed routes. -There are six modes available for route source: connected, kernel, -ospf, rip, static, table. -``` - -#### General Configuration -##### Common parameters - -```{cfgcmd} set protocols bgp parameters allow-martian-nexthop - - When a peer receives a martian nexthop as part of the NLRI for a route - permit the nexthop to be used as such, instead of rejecting and resetting - the connection. -``` - - -```{cfgcmd} set protocols bgp parameters router-id \ - -This command specifies the router-ID. If router ID is not specified it will -use the highest interface IP address. -``` - - -```{cfgcmd} set protocols bgp address-family \ maximum-paths \ \ - -This command defines the maximum number of parallel routes that -the BGP can support. In order for BGP to use the second path, the -following attributes have to match: Weight, Local Preference, AS -Path (both AS number and AS path length), Origin code, MED, IGP -metric. Also, the next hop address for each path must be different. -``` - - -```{cfgcmd} set protocols bgp parameters no-hard-administrative-reset - -Do not send Hard Reset CEASE Notification for "Administrative Reset" -events. When set and Graceful Restart Notification capability is exchanged -between the peers, Graceful Restart procedures apply, and routes will be retained. -``` - - -```{cfgcmd} set protocols bgp parameters log-neighbor-changes - -This command enable logging neighbor up/down changes and reset reason. -``` - - -```{cfgcmd} set protocols bgp parameters no-client-to-client-reflection - -This command disables route reflection between route reflector clients. -By default, the clients of a route reflector are not required to be -fully meshed and the routes from a client are reflected to other clients. -However, if the clients are fully meshed, route reflection is not required. -In this case, use the {cfgcmd}`no-client-to-client-reflection` command -to disable client-to-client reflection. -``` - - -```{cfgcmd} set protocols bgp parameters no-fast-external-failover - -Disable immediate session reset if peer's connected link goes down. -``` - - -```{cfgcmd} set protocols bgp parameters no-ipv6-auto-ra - -By default, FRR sends router advertisement packets when Extended Next Hop is -on or when a connection is established directly using the device name (Unnumbered BGP). -Setting this option prevents FRR from sending router advertisement packets, but could break Unnumbered BGP. -``` - - -```{cfgcmd} set protocols bgp listen range \ peer-group \ - -This command is useful if one desires to loosen the requirement for BGP -to have strictly defined neighbors. Specifically what is allowed is for -the local router to listen to a range of IPv4 or IPv6 addresses defined -by a prefix and to accept BGP open messages. When a TCP connection -(and subsequently a BGP open message) from within this range tries to -connect the local router then the local router will respond and connect -with the parameters that are defined within the peer group. One must define -a peer-group for each range that is listed. If no peer-group is defined -then an error will keep you from committing the configuration. -``` - - -```{cfgcmd} set protocols bgp listen limit \ - -This command goes hand in hand with the listen range command to limit the -amount of BGP neighbors that are allowed to connect to the local router. -The limit range is 1 to 5000. -``` - - -```{cfgcmd} set protocols bgp parameters ebgp-requires-policy - -This command changes the eBGP behavior of FRR. By default FRR enables -{rfc}`8212` functionality which affects how eBGP routes are advertised, -namely no routes are advertised across eBGP sessions without some -sort of egress route-map/policy in place. In VyOS however we have this -RFC functionality disabled by default so that we can preserve backwards -compatibility with older versions of VyOS. With this option one can -enable {rfc}`8212` functionality to operate. -``` - - -```{cfgcmd} set protocols bgp parameters labeled-unicast \ - -By default, locally advertised prefixes use the implicit-null label to -encode in the outgoing NLRI. - -The following command uses the explicit-null label value for all the -BGP instances. -``` - -##### Administrative Distance - -```{cfgcmd} set protocols bgp parameters distance global \ \ - -This command change distance value of BGP. The arguments are the distance -values for external routes, internal routes and local routes respectively. -The distance range is 1 to 255. -``` - - -```{cfgcmd} set protocols bgp parameters distance prefix \ distance \ - -This command sets the administrative distance for a particular route. The -distance range is 1 to 255. - -:::{note} -Routes with a distance of 255 are effectively disabled and not -installed into the kernel. -::: -``` - -##### Timers - -```{cfgcmd} set protocols bgp timers holdtime \ - - This command specifies hold-time in seconds. The timer range is - 4 to 65535. The default value is 180 second. If you set value to 0 - VyOS will not hold routes. -``` - - -```{cfgcmd} set protocols bgp timers keepalive \ - -This command specifies keep-alive time in seconds. The timer -can range from 4 to 65535. The default value is 60 second. -``` - -##### Route Dampening - -When a route fails, a routing update is sent to withdraw the route from the -network's routing tables. When the route is re-enabled, the change in -availability is also advertised. A route that continually fails and returns -requires a great deal of network traffic to update the network about the -route's status. - -Route dampening wich described in {rfc}`2439` enables you to identify routes -that repeatedly fail and return. If route dampening is enabled, an unstable -route accumulates penalties each time the route fails and returns. If the -accumulated penalties exceed a threshold, the route is no longer advertised. -This is route suppression. Routes that have been suppressed are re-entered -into the routing table only when the amount of their penalty falls below a -threshold. - -A penalty of 1000 is assessed each time the route fails. When the penalties -reach a predefined threshold (suppress-value), the router stops advertising -the route. - -Once a route is assessed a penalty, the penalty is decreased by half each time -a predefined amount of time elapses (half-life-time). When the accumulated -penalties fall below a predefined threshold (reuse-value), the route is -unsuppressed and added back into the BGP routing table. - -No route is suppressed indefinitely. Maximum-suppress-time defines the maximum -time a route can be suppressed before it is re-advertised. - -```{cfgcmd} set protocols bgp parameters dampening half-life \ - -This command defines the amount of time in minutes after -which a penalty is reduced by half. The timer range is -10 to 45 minutes. -``` - - -```{cfgcmd} set protocols bgp parameters dampening re-use \ - -This command defines the accumulated penalty amount at which the -route is re-advertised. The penalty range is 1 to 20000. -``` - - -```{cfgcmd} set protocols bgp parameters dampening start-suppress-time \ - -This command defines the accumulated penalty amount at which the -route is suppressed. The penalty range is 1 to 20000. -``` - - -```{cfgcmd} set protocols bgp parameters dampening max-suppress-time \ - -This command defines the maximum time in minutes that a route is -suppressed. The timer range is 1 to 255 minutes. -``` - -#### Route Selection Configuration - -```{cfgcmd} set protocols bgp parameters always-compare-med - - This command provides to compare the MED on routes, even when they were - received from different neighbouring ASes. Setting this option makes the - order of preference of routes more defined, and should eliminate MED - induced oscillations. -``` - - -```{cfgcmd} set protocols bgp parameters bestpath as-path confed - -This command specifies that the length of confederation path sets and -sequences should be taken into account during the BGP best path -decision process. -``` - - -```{cfgcmd} set protocols bgp parameters bestpath as-path multipath-relax - -This command specifies that BGP decision process should consider paths -of equal AS_PATH length candidates for multipath computation. Without -the knob, the entire AS_PATH must match for multipath computation. -``` - - -```{cfgcmd} set protocols bgp parameters bestpath as-path ignore - -Ignore AS_PATH length when selecting a route -``` - - -```{cfgcmd} set protocols bgp parameters bestpath compare-routerid - -Ensure that when comparing routes where both are equal on most metrics, -including local-pref, AS_PATH length, IGP cost, MED, that the tie is -broken based on router-ID. - -If this option is enabled, then the already-selected check, where -already selected eBGP routes are preferred, is skipped. - -If a route has an ORIGINATOR_ID attribute because it has been reflected, -that ORIGINATOR_ID will be used. Otherwise, the router-ID of the peer -the route was received from will be used. - -The advantage of this is that the route-selection (at this point) will -be more deterministic. The disadvantage is that a few or even one lowest-ID -router may attract all traffic to otherwise-equal paths because of this -check. It may increase the possibility of MED or IGP oscillation, unless -other measures were taken to avoid these. The exact behaviour will be -sensitive to the iBGP and reflection topology. -``` - - -```{cfgcmd} set protocols bgp parameters bestpath med confed - -This command specifies that BGP considers the MED when comparing routes -originated from different sub-ASs within the confederation to which this -BGP speaker belongs. The default state, where the MED attribute is not -considered. -``` - - -```{cfgcmd} set protocols bgp parameters bestpath med missing-as-worst - -This command specifies that a route with a MED is always considered to be -better than a route without a MED by causing the missing MED attribute to -have a value of infinity. The default state, where the missing MED -attribute is considered to have a value of zero. -``` - - -```{cfgcmd} set protocols bgp parameters default local-pref - -This command specifies the default local preference value. The local -preference range is 0 to 4294967295. -``` - - -```{cfgcmd} set protocols bgp parameters deterministic-med - -This command provides to compare different MED values that advertised by -neighbours in the same AS for routes selection. When this command is -enabled, routes from the same autonomous system are grouped together, and -the best entries of each group are compared. -``` - - -```{cfgcmd} set protocols bgp address-family ipv4-unicast network \ backdoor - -This command allows the router to prefer route to specified prefix learned -via IGP through backdoor link instead of a route to the same prefix learned -via EBGP. -``` - -#### Route Filtering Configuration - -In order to control and modify routing information that is exchanged between -peers you can use route-map, filter-list, prefix-list, distribute-list. - -For inbound updates the order of preference is: - -> - route-map -> - filter-list -> - prefix-list, distribute-list - -For outbound updates the order of preference is: -> - prefix-list, distribute-list -> - filter-list -> - route-map -> -> :::{note} -> The attributes {cfgcmd}`prefix-list` and {cfgcmd}`distribute-list` -> are mutually exclusive, and only one command (distribute-list or -> prefix-list) can be applied to each inbound or outbound direction for a -> particular neighbor. -> ::: - -```{cfgcmd} set protocols bgp neighbor \ address-family \ distribute-list \ \ - -This command applies the access list filters named in \ to the -specified BGP neighbor to restrict the routing information that BGP learns -and/or advertises. The arguments {cfgcmd}`export` and {cfgcmd}`import` -specify the direction in which the access list are applied. -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ prefix-list \ \ - -This command applies the prfefix list filters named in \ to the -specified BGP neighbor to restrict the routing information that BGP learns -and/or advertises. The arguments {cfgcmd}`export` and {cfgcmd}`import` -specify the direction in which the prefix list are applied. -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ route-map \ \ - -This command applies the route map named in \ to the specified BGP -neighbor to control and modify routing information that is exchanged -between peers. The arguments {cfgcmd}`export` and {cfgcmd}`import` -specify the direction in which the route map are applied. -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ filter-list \ \ - -This command applies the AS path access list filters named in \ to the -specified BGP neighbor to restrict the routing information that BGP learns -and/or advertises. The arguments {cfgcmd}`export` and {cfgcmd}`import` -specify the direction in which the AS path access list are applied. -``` - - -```{cfgcmd} set protocols bgp neighbor \ address-family \ capability orf \ - -This command enables the ORF capability (described in {rfc}`5291`) on the -local router, and enables ORF capability advertisement to the specified BGP -peer. The {cfgcmd}`receive` keyword configures a router to advertise ORF -receive capabilities. The {cfgcmd}`send` keyword configures a router to -advertise ORF send capabilities. To advertise a filter from a sender, you -must create an IP prefix list for the specified BGP peer applied in inbound -derection. -``` - - -```{cfgcmd} set protocols bgp neighbor \ solo - -This command prevents from sending back prefixes learned from the neighbor. -``` - -#### BGP Scaling Configuration - - -BGP routers connected inside the same AS through BGP belong to an internal BGP -session, or IBGP. In order to prevent routing table loops, IBGP speaker does -not advertise IBGP-learned routes to other IBGP speaker (Split Horizon -mechanism). As such, IBGP requires a full mesh of all peers. For large -networks, this quickly becomes unscalable. - - -There are two ways that help us to mitigate the BGPs full-mesh requirement in -a network: - - -> - Using BGP route-reflectors -> - Using BGP confederation - - -##### Route Reflector Configuration - - -Introducing route reflectors removes the need for the full-mesh. When you -configure a route reflector you have to tell the router whether the other IBGP -router is a client or non-client. A client is an IBGP router that the route -reflector will “reflect” routes to, the non-client is just a regular IBGP -neighbor. Route reflectors mechanism is described in {rfc}`4456` and updated -by {rfc}`7606`. - -```{cfgcmd} set protocols bgp neighbor \ address-family \ route-reflector-client - -This command specifies the given neighbor as route reflector client. -``` - - -```{cfgcmd} set protocols bgp parameters cluster-id \ - -This command specifies cluster ID which identifies a collection of route -reflectors and their clients, and is used by route reflectors to avoid -looping. By default cluster ID is set to the BGP router id value, but can be -set to an arbitrary 32-bit value. -``` - -##### Confederation Configuration - -A BGP confederation divides our AS into sub-ASes to reduce the number of -required IBGP peerings. Within a sub-AS we still require full-mesh IBGP but -between these sub-ASes we use something that looks like EBGP but behaves like -IBGP (called confederation BGP). Confederation mechanism is described in -{rfc}`5065` - -```{cfgcmd} set protocols bgp parameters confederation identifier \ - -This command specifies a BGP confederation identifier. \ is the number -of the autonomous system that internally includes multiple sub-autonomous -systems (a confederation). -``` - - -```{cfgcmd} set protocols bgp parameters confederation peers \ - -This command sets other confederations \ as members of autonomous -system specified by {cfgcmd}`confederation identifier `. -``` - -## Operational Mode Commands -### Show - -```{opcmd} show bgp \ - - This command displays all entries in BGP routing table. -``` - - -```none -BGP table version is 10, local router ID is 10.0.35.3, vrf id 0 -Default local pref 100, local AS 65000 -Status codes: s suppressed, d damped, h history, * valid, > best, = multipath, - i internal, r RIB-failure, S Stale, R Removed -Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self -Origin codes: i - IGP, e - EGP, ? - incomplete -RPKI validation codes: V valid, I invalid, N Not found - - Network Next Hop Metric LocPrf Weight Path -*> 198.51.100.0/24 10.0.34.4 0 0 65004 i -*> 203.0.113.0/24 10.0.35.5 0 0 65005 i - -Displayed 2 routes and 2 total paths -``` - - -```{opcmd} show bgp \ \ - -This command displays information about the particular entry in the BGP -routing table. -``` - - -```none -BGP routing table entry for 198.51.100.0/24 -Paths: (1 available, best #1, table default) - Advertised to non peer-group peers: - 10.0.13.1 10.0.23.2 10.0.34.4 10.0.35.5 - 65004 - 10.0.34.4 from 10.0.34.4 (10.0.34.4) - Origin IGP, metric 0, valid, external, best (First path received) - Last update: Wed Jan 6 12:18:53 2021 -``` - - -```{opcmd} show bgp cidr-only - -This command displays routes with classless interdomain routing (CIDR). -``` - - -```{opcmd} show bgp \ community \ - -This command displays routes that belong to specified BGP communities. -Valid value is a community number in the range from 1 to 4294967200, -or AA:NN (autonomous system-community number/2-byte number), no-export, -local-as, or no-advertise. -``` - - -```{opcmd} show bgp \ community-list \ - -This command displays routes that are permitted by the BGP -community list. -``` - - -```{opcmd} show bgp \ dampening dampened-paths - -This command displays BGP dampened routes. -``` - - -```{opcmd} show bgp \ dampening flap-statistics - -This command displays information about flapping BGP routes. -``` - - -```{opcmd} show bgp \ filter-list \ - -This command displays BGP routes allowed by the specified AS Path -access list. -``` - - -```{opcmd} show bgp \ neighbors \ advertised-routes - -This command displays BGP routes advertised to a neighbor. -``` - - -```{opcmd} show bgp \ neighbors \ received-routes - -This command displays BGP routes originating from the specified BGP -neighbor before inbound policy is applied. To use this command inbound -soft reconfiguration must be enabled. -``` - - -```{opcmd} show bgp \ neighbors \ routes - -This command displays BGP received-routes that are accepted after filtering. -``` - - -```{opcmd} show bgp \ neighbors \ dampened-routes - -This command displays dampened routes received from BGP neighbor. -``` - - -```{opcmd} show bgp \ regexp \ - -This command displays information about BGP routes whose AS path -matches the specified regular expression. -``` - - -```{opcmd} show bgp \ summary - -This command displays the status of all BGP connections. -``` - - -```none -IPv4 Unicast Summary: -BGP router identifier 10.0.35.3, local AS number 65000 vrf-id 0 -BGP table version 11 -RIB entries 5, using 920 bytes of memory -Peers 4, using 82 KiB of memory - -Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd -10.0.13.1 4 65000 148 159 0 0 0 02:16:01 0 -10.0.23.2 4 65000 136 143 0 0 0 02:13:21 0 -10.0.34.4 4 65004 161 163 0 0 0 02:16:01 1 -10.0.35.5 4 65005 162 166 0 0 0 02:16:01 1 - -Total number of neighbors 4 -``` - -### Reset - -```{opcmd} reset bgp \ \ [soft [in|out]] - -This command resets BGP connections to the specified neighbor IP address. -With argument {cfgcmd}`soft` this command initiates a soft reset. If -you do not specify the {cfgcmd}`in` or {cfgcmd}`out` options, both -inbound and outbound soft reconfiguration are triggered. -``` - - -```{opcmd} reset bgp all - -This command resets all BGP connections of given router. -``` - - -```{opcmd} reset bgp \ external - -This command resets all external BGP peers of given router. -``` - - -```{opcmd} reset bgp \ peer-group \ [soft [in|out]] - -This command resets BGP connections to the specified peer group. -With argument {cfgcmd}`soft` this command initiates a soft reset. If -you do not specify the {cfgcmd}`in` or {cfgcmd}`out` options, both -inbound and outbound soft reconfiguration are triggered. -``` - -## Examples -### IPv4 peering - -A simple eBGP configuration: - -**Node 1:** - -```none -set protocols bgp system-as 65534 -set protocols bgp neighbor 192.168.0.2 ebgp-multihop '2' -set protocols bgp neighbor 192.168.0.2 remote-as '65535' -set protocols bgp neighbor 192.168.0.2 update-source '192.168.0.1' -set protocols bgp neighbor 192.168.0.2 address-family ipv4-unicast -set protocols bgp address-family ipv4-unicast network '172.16.0.0/16' -set protocols bgp parameters router-id '192.168.0.1' -``` - -**Node 2:** - -```none -set protocols bgp system-as 65535 -set protocols bgp neighbor 192.168.0.1 ebgp-multihop '2' -set protocols bgp neighbor 192.168.0.1 remote-as '65534' -set protocols bgp neighbor 192.168.0.1 update-source '192.168.0.2' -set protocols bgp neighbor 192.168.0.1 address-family ipv4-unicast -set protocols bgp address-family ipv4-unicast network '172.17.0.0/16' -set protocols bgp parameters router-id '192.168.0.2' -``` - -Don't forget, the CIDR declared in the network statement MUST **exist in your -routing table (dynamic or static), the best way to make sure that is true is -creating a static route:** - -**Node 1:** - -```none -set protocols static route 172.16.0.0/16 blackhole distance '254' -``` - -**Node 2:** - -```none -set protocols static route 172.17.0.0/16 blackhole distance '254' -``` - -### IPv6 peering - -A simple BGP configuration via IPv6. - -**Node 1:** - -```none -set protocols bgp system-as 65534 -set protocols bgp neighbor 2001:db8::2 ebgp-multihop '2' -set protocols bgp neighbor 2001:db8::2 remote-as '65535' -set protocols bgp neighbor 2001:db8::2 update-source '2001:db8::1' -set protocols bgp neighbor 2001:db8::2 address-family ipv6-unicast -set protocols bgp address-family ipv6-unicast network '2001:db8:1::/48' -set protocols bgp parameters router-id '10.1.1.1' -``` - -**Node 2:** - -```none -set protocols bgp system-as 65535 -set protocols bgp neighbor 2001:db8::1 ebgp-multihop '2' -set protocols bgp neighbor 2001:db8::1 remote-as '65534' -set protocols bgp neighbor 2001:db8::1 update-source '2001:db8::2' -set protocols bgp neighbor 2001:db8::1 address-family ipv6-unicast -set protocols bgp address-family ipv6-unicast network '2001:db8:2::/48' -set protocols bgp parameters router-id '10.1.1.2' -``` - -Don't forget, the CIDR declared in the network statement **MUST exist in your -routing table (dynamic or static), the best way to make sure that is true is -creating a static route:** - -**Node 1:** - -```none -set protocols static route6 2001:db8:1::/48 blackhole distance '254' -``` - -**Node 2:** - -```none -set protocols static route6 2001:db8:2::/48 blackhole distance '254' -``` - -### Route Filtering - -Route filter can be applied using a route-map: - -**Node1:** - -```none -set policy prefix-list AS65535-IN rule 10 action 'permit' -set policy prefix-list AS65535-IN rule 10 prefix '172.16.0.0/16' -set policy prefix-list AS65535-OUT rule 10 action 'deny' -set policy prefix-list AS65535-OUT rule 10 prefix '172.16.0.0/16' -set policy prefix-list6 AS65535-IN rule 10 action 'permit' -set policy prefix-list6 AS65535-IN rule 10 prefix '2001:db8:2::/48' -set policy prefix-list6 AS65535-OUT rule 10 action 'deny' -set policy prefix-list6 AS65535-OUT rule 10 prefix '2001:db8:2::/48' - -set policy route-map AS65535-IN rule 10 action 'permit' -set policy route-map AS65535-IN rule 10 match ip address prefix-list 'AS65535-IN' -set policy route-map AS65535-IN rule 10 match ipv6 address prefix-list 'AS65535-IN' -set policy route-map AS65535-IN rule 20 action 'deny' -set policy route-map AS65535-OUT rule 10 action 'deny' -set policy route-map AS65535-OUT rule 10 match ip address prefix-list 'AS65535-OUT' -set policy route-map AS65535-OUT rule 10 match ipv6 address prefix-list 'AS65535-OUT' -set policy route-map AS65535-OUT rule 20 action 'permit' - -set protocols bgp system-as 65534 -set protocols bgp neighbor 2001:db8::2 address-family ipv4-unicast route-map export 'AS65535-OUT' -set protocols bgp neighbor 2001:db8::2 address-family ipv4-unicast route-map import 'AS65535-IN' -set protocols bgp neighbor 2001:db8::2 address-family ipv6-unicast route-map export 'AS65535-OUT' -set protocols bgp neighbor 2001:db8::2 address-family ipv6-unicast route-map import 'AS65535-IN' -``` - -**Node2:** - -```none -set policy prefix-list AS65534-IN rule 10 action 'permit' -set policy prefix-list AS65534-IN rule 10 prefix '172.17.0.0/16' -set policy prefix-list AS65534-OUT rule 10 action 'deny' -set policy prefix-list AS65534-OUT rule 10 prefix '172.17.0.0/16' -set policy prefix-list6 AS65534-IN rule 10 action 'permit' -set policy prefix-list6 AS65534-IN rule 10 prefix '2001:db8:1::/48' -set policy prefix-list6 AS65534-OUT rule 10 action 'deny' -set policy prefix-list6 AS65534-OUT rule 10 prefix '2001:db8:1::/48' - -set policy route-map AS65534-IN rule 10 action 'permit' -set policy route-map AS65534-IN rule 10 match ip address prefix-list 'AS65534-IN' -set policy route-map AS65534-IN rule 10 match ipv6 address prefix-list 'AS65534-IN' -set policy route-map AS65534-IN rule 20 action 'deny' -set policy route-map AS65534-OUT rule 10 action 'deny' -set policy route-map AS65534-OUT rule 10 match ip address prefix-list 'AS65534-OUT' -set policy route-map AS65534-OUT rule 10 match ipv6 address prefix-list 'AS65534-OUT' -set policy route-map AS65534-OUT rule 20 action 'permit' - -set protocols bgp system-as 65535 -set protocols bgp neighbor 2001:db8::1 address-family ipv4-unicast route-map export 'AS65534-OUT' -set protocols bgp neighbor 2001:db8::1 address-family ipv4-unicast route-map import 'AS65534-IN' -set protocols bgp neighbor 2001:db8::1 address-family ipv6-unicast route-map export 'AS65534-OUT' -set protocols bgp neighbor 2001:db8::1 address-family ipv6-unicast route-map import 'AS65534-IN' -``` - -We could expand on this and also deny link local and multicast in the rule 20 -action deny. diff --git a/docs/configuration/protocols/failover.md b/docs/configuration/protocols/failover.md deleted file mode 100644 index 96374d11..00000000 --- a/docs/configuration/protocols/failover.md +++ /dev/null @@ -1,237 +0,0 @@ ---- -description: |- - Failover routes are static routes that are installed in the routing - table only while a configured health-check target responds. VyOS uses them - to switch traffic to a backup path when the primary next hop becomes - unreachable, and to restore the primary path automatically once it recovers. -keywords: |- - failover, failover route, static route, health check, icmp probe, - next hop, route metric ---- - -# Failover - -Failover routes are manually configured network paths used only while their -health-check targets are reachable. If the target stops responding, VyOS -removes the route from the routing table and reinstalls it once the target -recovers. - -## Configuration - -Use the following commands to configure failover routes for a specific remote -`` reachable via next-hop `
`. - -```{eval-rst} -.. cfgcmd:: set protocols failover route next-hop
check target - - **Configure the health check target IP address.** - - This is typically a highly available host, either within the destination - subnet or on the public internet. - - Example: - - .. code-block:: none - - set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 check target 8.8.8.8 -``` - -```{eval-rst} -.. cfgcmd:: set protocols failover route next-hop
check timeout - - **Configure the timeout interval, in seconds, between target health checks.** - - The valid range is 1 to 300 seconds. The default is 10 seconds. - - Example: - - .. code-block:: none - - set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 check timeout 2 -``` - -```{eval-rst} -.. cfgcmd:: set protocols failover route next-hop
check type - - **Configure the protocol to use for health checks.** - - The following protocols are available: - - * ``icmp``: VyOS sends two ICMP echo request packets with a 1-second - response timeout. The health check is successful if at least one response - is received. - * ``arp``: VyOS sends two ARP requests with a 1-second response timeout. - The health check is successful if at least one response is received. - * ``tcp``: VyOS verifies whether the destination TCP port is open. The - health check is successful if a TCP connection is successfully - established with the target port. - - The default protocol is ``icmp``. - - .. note:: - - When the check type is set to ``tcp``, you must also define the target - TCP port. - - Example: - - .. code-block:: none - - set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 check type tcp -``` - -```{eval-rst} -.. cfgcmd:: set protocols failover route next-hop
check port - - **Configure the destination TCP port on the health check target.** - - This parameter applies only when the check type is configured as ``tcp``. - - The valid port range is 1 to 65535. - - Example: - - .. code-block:: none - - set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 check port 443 -``` - -```{eval-rst} -.. cfgcmd:: set protocols failover route next-hop
check policy - - **Configure the health check success policy for multiple targets.** - - The following policies are available: - - * ``any-available``: The health check succeeds if at least one of the - configured targets responds successfully. - * ``all-available``: The health check succeeds only if every configured - target responds successfully. - - The default policy is ``any-available``. - - Example: - - .. code-block:: none - - set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 check policy all-available -``` - -```{eval-rst} -.. cfgcmd:: set protocols failover route next-hop
interface - - **Configure the local interface used to reach the next-hop address.** - - This parameter is mandatory. - - Example: - - .. code-block:: none - - set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 interface eth0 -``` - -```{eval-rst} -.. cfgcmd:: set protocols failover route next-hop
metric <1-255> - - **Configure the metric (cost) for the failover route.** - - The metric defines the route priority. A lower metric value indicates a - more preferred route. - - The default value is 1. - - Example: - - .. code-block:: none - - set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 metric 50 -``` - -```{eval-rst} -.. cfgcmd:: set protocols failover route next-hop
onlink - - Configure the next-hop to be reachable via the assigned interface, even - when ``
`` is outside any subnet configured on that interface. - - Example: - - .. code-block:: none - - set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 onlink -``` - -## Examples - -### Failover route with a single next-hop and ICMP health check - -The following example configures a failover route to `203.0.113.1/32` -through next-hop `192.0.2.1` on `eth0`. The next-hop is monitored with -ICMP probes to `192.0.2.1` every 5 seconds, and the route is installed with -a metric of 10. - -```none -set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 check target '192.0.2.1' -set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 check timeout '5' -set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 check type 'icmp' -set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 interface 'eth0' -set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 metric '10' -``` - -Verify the route: - -```none -vyos@vyos:~$ show ip route 203.0.113.1 -Routing entry for 203.0.113.1/32 - Known via "kernel", distance 0, metric 10, best - Last update 00:00:39 ago - Flags: Selected - Status: Installed - * 192.0.2.1, via eth0, weight 1 -``` - -### Two failover routes with different metrics - -The following example configures two failover routes to `203.0.113.1/32`, -each through a different next-hop. The primary next-hop `192.0.2.1` is -reached on `eth0` with metric 10, and the backup next-hop `198.51.100.1` -is reached on `eth2` with metric 20. Both next-hops are monitored with ICMP -probes every 5 seconds. - -While both health checks succeed, the lower-metric route through `eth0` is -preferred. If the primary target stops responding, its route is removed from -the routing table, and traffic falls over to `198.51.100.1` via `eth2`. - -```none -set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 check target '192.0.2.1' -set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 check timeout '5' -set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 check type 'icmp' -set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 interface 'eth0' -set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 metric '10' - -set protocols failover route 203.0.113.1/32 next-hop 198.51.100.1 check target '198.51.100.99' -set protocols failover route 203.0.113.1/32 next-hop 198.51.100.1 check timeout '5' -set protocols failover route 203.0.113.1/32 next-hop 198.51.100.1 check type 'icmp' -set protocols failover route 203.0.113.1/32 next-hop 198.51.100.1 interface 'eth2' -set protocols failover route 203.0.113.1/32 next-hop 198.51.100.1 metric '20' -``` - -Verify routes: - -```none -vyos@vyos:~$ show ip route 203.0.113.1 -Routing entry for 203.0.113.1/32 - Known via "kernel", distance 0, metric 10, best - Last update 00:08:06 ago - Flags: Selected - Status: Installed - * 192.0.2.1, via eth0, weight 1 - -Routing entry for 203.0.113.1/32 - Known via "kernel", distance 0, metric 20 - Last update 00:08:14 ago - Flags: None - Status: Installed - * 198.51.100.1, via eth2, weight 1 -``` - diff --git a/docs/configuration/protocols/igmp-proxy.md b/docs/configuration/protocols/igmp-proxy.md deleted file mode 100644 index 961f921b..00000000 --- a/docs/configuration/protocols/igmp-proxy.md +++ /dev/null @@ -1,79 +0,0 @@ ---- -lastproofread: '2023-11-13' ---- - -(igmp-proxy)= - -# IGMP Proxy - -{abbr}`IGMP (Internet Group Management Protocol)` proxy sends IGMP host messages -on behalf of a connected client. The configuration must define one, and only one -upstream interface, and one or more downstream interfaces. - -## Configuration - -```{cfgcmd} set protocols igmp-proxy interface \ role \ - -* **upstream:** The upstream network interface is the outgoing interface -which is responsible for communicating to available multicast data sources. -There can only be one upstream interface. - -* **downstream:** Downstream network interfaces are the distribution -interfaces to the destination networks, where multicast clients can join -groups and receive multicast data. One or more downstream interfaces must -be configured. -``` - -```{cfgcmd} set protocols igmp-proxy interface \ alt-subnet \ - -Defines alternate sources for multicasting and IGMP data. The network address -must be on the following format 'a.b.c.d/n'. By default, the router will -accept data from sources on the same network as configured on an interface. -If the multicast source lies on a remote network, one must define from where -traffic should be accepted. - -This is especially useful for the upstream interface, since the source for -multicast traffic is often from a remote location. - -This option can be supplied multiple times. -``` - -```{cfgcmd} set protocols igmp-proxy disable-quickleave - -Disables quickleave mode. In this mode the daemon will not send a Leave IGMP -message upstream as soon as it receives a Leave message for any downstream -interface. The daemon will not ask for Membership reports on the downstream -interfaces, and if a report is received the group is not joined again the -upstream. - -If it's vital that the daemon should act exactly like a real multicast client -on the upstream interface, this function should be enabled. - -Enabling this function increases the risk of bandwidth saturation. -``` - -```{cfgcmd} set protocols igmp-proxy disable - -Disable this service. -``` - -(igmp-proxy-example)= - -### Example - -Interface eth1 LAN is behind NAT. In order to subscribe 10.0.0.0/23 subnet -multicast which is in eth0 WAN we need to configure igmp-proxy. - -```none -set protocols igmp-proxy interface eth0 role upstream -set protocols igmp-proxy interface eth0 alt-subnet 10.0.0.0/23 -set protocols igmp-proxy interface eth1 role downstream -``` - - -## Operation - -```{opcmd} restart igmp-proxy - -Restart the IGMP proxy process. -``` \ No newline at end of file diff --git a/docs/configuration/protocols/index.md b/docs/configuration/protocols/index.md deleted file mode 100644 index 5f190ce1..00000000 --- a/docs/configuration/protocols/index.md +++ /dev/null @@ -1,25 +0,0 @@ -# Protocols - -```{toctree} -:includehidden: true -:maxdepth: 1 - -arp -babel -bfd -bgp -failover -igmp-proxy -isis -mpls -multicast -segment-routing -traffic-engineering -openfabric -ospf -pim -pim6 -rip -rpki -static -``` diff --git a/docs/configuration/protocols/isis.md b/docs/configuration/protocols/isis.md deleted file mode 100644 index ac6db346..00000000 --- a/docs/configuration/protocols/isis.md +++ /dev/null @@ -1,746 +0,0 @@ -```{include} /_include/need_improvement.txt -``` - -(routing-isis)= - -# IS-IS - -{abbr}`IS-IS (Intermediate System to Intermediate System)` is a link-state -interior gateway protocol (IGP) which is described in ISO10589, -{rfc}`1195`, {rfc}`5308`. IS-IS runs the Dijkstra shortest-path first (SPF) -algorithm to create a database of the network’s topology, and -from that database to determine the best (that is, lowest cost) path to a -destination. The intermediate systems (the name for routers) exchange topology -information with their directly connected neighbors. IS-IS runs directly on -the data link layer (Layer 2). IS-IS addresses are called -{abbr}`NETs (Network Entity Titles)` and can be 8 to 20 bytes long, but are -generally 10 bytes long. The tree database that is created with IS-IS is -similar to the one that is created with OSPF in that the paths chosen should -be similar. Comparisons to OSPF are inevitable and often are reasonable ones -to make in regards to the way a network will respond with either IGP. - -## General - -### Configuration - -#### Mandatory Settings - -For IS-IS top operate correctly, one must do the equivalent of a Router ID in -CLNS. This Router ID is called the {abbr}`NET (Network Entity Title)`. This -must be unique for each and every router that is operating in IS-IS. It also -must not be duplicated otherwise the same issues that occur within OSPF will -occur within IS-IS when it comes to said duplication. - -```{cfgcmd} set protocols isis net \ - -This command sets network entity title (NET) provided in ISO format. - -Here is an example {abbr}`NET (Network Entity Title)` value: - -:::{code-block} none -49.0001.1921.6800.1002.00 -::: -The CLNS address consists of the following parts: - -* {abbr}`AFI (Address family authority identifier)` - ``49`` The AFI value - 49 is what IS-IS uses for private addressing. - -* Area identifier: ``0001`` IS-IS area number (numerical area ``1``) - -* System identifier: ``1921.6800.1002`` - for system identifiers we recommend - to use IP address or MAC address of the router itself. The way to construct - this is to keep all of the zeroes of the router IP address, and then change - the periods from being every three numbers to every four numbers. The - address that is listed here is ``192.168.1.2``, which if expanded will turn - into ``192.168.001.002``. Then all one has to do is move the dots to have - four numbers instead of three. This gives us ``1921.6800.1002``. - -* {abbr}`NET (Network Entity Title)` selector: ``00`` Must always be 00. This - setting indicates "this system" or "local system." - -``` - -```{cfgcmd} set protocols isis interface \ - -This command enables IS-IS on this interface, and allows for -adjacency to occur. Note that the name of IS-IS instance must be -the same as the one used to configure the IS-IS process. -``` - -#### IS-IS Global Configuration - -```{cfgcmd} set protocols isis dynamic-hostname - -This command enables support for dynamic hostname TLV. Dynamic hostname -mapping determined as described in {rfc}`2763`, Dynamic Hostname -Exchange Mechanism for IS-IS. -``` - -```{cfgcmd} set protocols isis level \ - -This command defines the IS-IS router behavior: - -* **level-1** - Act as a station (Level 1) router only. -* **level-1-2** - Act as a station (Level 1) router and area (Level 2) router. -* **level-2-only** - Act as an area (Level 2) router only. -``` - -```{cfgcmd} set protocols isis lsp-mtu \ - -This command configures the maximum size of generated -{abbr}`LSPs (Link State PDUs)`, in bytes. The size range is 128 to 4352. -``` - -```{cfgcmd} set protocols isis metric-style \ - -This command sets old-style (ISO 10589) or new style packet formats: - -* **narrow** - Use old style of TLVs with narrow metric. -* **transition** - Send and accept both styles of TLVs during transition. -* **wide** - Use new style of TLVs to carry wider metric. -``` - -```{cfgcmd} set protocols isis purge-originator - -This command enables {rfc}`6232` purge originator identification. Enable -purge originator identification (POI) by adding the type, length and value -(TLV) with the Intermediate System (IS) identification to the LSPs that do -not contain POI information. If an IS generates a purge, VyOS adds this TLV -with the system ID of the IS to the purge. -``` - -```{cfgcmd} set protocols isis set-attached-bit - -This command sets ATT bit to 1 in Level1 LSPs. It is described in {rfc}`3787`. -``` - -```{cfgcmd} set protocols isis set-overload-bit - -This command sets overload bit to avoid any transit traffic through this -router. It is described in {rfc}`3787`. -``` - -```{cfgcmd} set protocols isis default-information originate \ level-1 - -This command will generate a default-route in L1 database. -``` - -```{cfgcmd} set protocols isis default-information originate \ level-2 - -This command will generate a default-route in L2 database. -``` - -```{cfgcmd} set protocols isis ldp-sync - -This command will enable IGP-LDP synchronization globally for ISIS. This -requires for LDP to be functional. This is described in {rfc}`5443`. By -default all interfaces operational in IS-IS are enabled for synchronization. -Loopbacks are exempt. - -``` - -```{cfgcmd} set protocols isis ldp-sync holddown \ - -This command will change the hold down value globally for IGP-LDP -synchronization during convergence/interface flap events. -``` - -#### Interface Configuration - -```{cfgcmd} set protocols isis interface \ circuit-type \ - -This command specifies circuit type for interface: - -* **level-1** - Level-1 only adjacencies are formed. -* **level-1-2** - Level-1-2 adjacencies are formed -* **level-2-only** - Level-2 only adjacencies are formed - -``` - -```{cfgcmd} set protocols isis interface \ hello-interval \ - -This command sets hello interval in seconds on a given interface. -The range is 1 to 600. -``` - -```{cfgcmd} set protocols isis interface \ hello-multiplier \ - -This command sets multiplier for hello holding time on a given -interface. The range is 2 to 100. -``` - -```{cfgcmd} set protocols isis interface \ hello-padding - -This command configures padding on hello packets to accommodate asymmetrical -maximum transfer units (MTUs) from different hosts as described in -{rfc}`3719`. This helps to prevent a premature adjacency Up state when one -routing devices MTU does not meet the requirements to establish the adjacency. -``` - -```{cfgcmd} set protocols isis interface \ metric \ - -This command set default metric for circuit. - -The metric range is 1 to 16777215 (Max value depend if metric support narrow -or wide value). -``` - -```{cfgcmd} set protocols isis interface \ network point-to-point - -This command specifies network type to Point-to-Point. The default -network type is broadcast. -``` - -```{cfgcmd} set protocols isis interface \ passive - -This command configures the passive mode for this interface. -``` - -```{cfgcmd} set protocols isis interface \ password plaintext-password \ - -This command configures the authentication password for the interface. -``` - -```{cfgcmd} set protocols isis interface \ priority \ - -This command sets priority for the interface for -{abbr}`DIS (Designated Intermediate System)` election. The priority -range is 0 to 127. -``` - -```{cfgcmd} set protocols isis interface \ psnp-interval \ - -This command sets PSNP interval in seconds. The interval range is 0 -to 127. -``` - -```{cfgcmd} set protocols isis interface \ no-three-way-handshake - -This command disables Three-Way Handshake for P2P adjacencies which -described in {rfc}`5303`. Three-Way Handshake is enabled by default. -``` - -```{cfgcmd} set protocols isis interface \ ldp-sync disable - -This command disables IGP-LDP sync for this specific interface. -``` - -```{cfgcmd} set protocols isis interface \ ldp-sync holddown \ - -This command will change the hold down value for IGP-LDP synchronization -during convergence/interface flap events, but for this interface only. -``` - -```{cfgcmd} set protocols isis interface \ fast-reroute lfa [level-1 | level-2] enable - -This command enables per-prefix local LFA fast reroute link protection. -``` - -```{cfgcmd} set protocols isis interface \ fast-reroute lfa [level-1 | level-2] exclude - -This command excludes an interface from the local LFA backup nexthop computation. -``` - -```{cfgcmd} set protocols isis interface \ fast-reroute remote-lfa [level-1 | level-2] tunnel mpls-ldp - -This command enables per-prefix Remote LFA fast reroute link protection. -Note that other routers in the network need to be configured to accept LDP -targeted hello messages in order for RLFA to work. -``` - -```{cfgcmd} set protocols isis interface \ fast-reroute remote-lfa [level-1 | level-2] maximum-metric \ - -This command limits Remote LFA PQ node selection within the specified metric. Metric value range (1-16777215). -``` - -```{cfgcmd} set protocols isis interface \ fast-reroute ti-lfa [level-1|level-2] [node-protection [link-fallback]] - -This command enables per-prefix TI-LFA fast reroute link or node protection. -When node protection is used, option link-fallback enables the computation -and use of link-protecting LFAs for destinations unprotected by node -protection. -``` - -#### Route Redistribution - -```{cfgcmd} set protocols isis redistribute ipv4 \ level-1 - -This command redistributes routing information from the given route source -into the ISIS database as Level-1. There are six modes available for route -source: bgp, connected, kernel, ospf, rip, static. -``` - -```{cfgcmd} set protocols isis redistribute ipv4 \ level-2 - -This command redistributes routing information from the given route source -into the ISIS database as Level-2. There are six modes available for route -source: bgp, connected, kernel, ospf, rip, static. -``` - -```{cfgcmd} set protocols isis redistribute ipv4 \ \ metric \ - -This command specifies metric for redistributed routes from the given route -source. There are six modes available for route source: bgp, connected, -kernel, ospf, rip, static. The metric range is 1 to 16777215. -``` - -```{cfgcmd} set protocols isis redistribute ipv4 \ \ route-map \ - -This command allows to use route map to filter redistributed routes from -the given route source. There are six modes available for route source: -bgp, connected, kernel, ospf, rip, static. -``` - -#### Timers - -```{cfgcmd} set protocols isis lsp-gen-interval \ - -This command sets minimum interval in seconds between regenerating same -LSP. The interval range is 1 to 120. -``` - -```{cfgcmd} set protocols isis lsp-refresh-interval \ - -This command sets LSP refresh interval in seconds. IS-IS generates LSPs -when the state of a link changes. However, to ensure that routing -databases on all routers remain converged, LSPs in stable networks are -generated on a regular basis even though there has been no change to -the state of the links. The interval range is 1 to 65235. The default -value is 900 seconds. -``` - -```{cfgcmd} set protocols isis max-lsp-lifetime \ - -This command sets LSP maximum LSP lifetime in seconds. The interval range -is 350 to 65535. LSPs remain in a database for 1200 seconds by default. -If they are not refreshed by that time, they are deleted. You can change -the LSP refresh interval or the LSP lifetime. The LSP refresh interval -should be less than the LSP lifetime or else LSPs will time out before -they are refreshed. -``` - -```{cfgcmd} set protocols isis spf-interval \ - -This command sets minimum interval between consecutive SPF calculations in -seconds.The interval range is 1 to 120. -``` - -```{cfgcmd} set protocols isis spf-delay-ietf holddown \ -``` - -```{cfgcmd} set protocols isis spf-delay-ietf init-delay \ -``` - -```{cfgcmd} set protocols isis spf-delay-ietf long-delay \ -``` - -```{cfgcmd} set protocols isis spf-delay-ietf short-delay \ -``` - -```{cfgcmd} set protocols isis spf-delay-ietf time-to-learn \ - -This commands specifies the Finite State Machine (FSM) intended to -control the timing of the execution of SPF calculations in response -to IGP events. The process described in {rfc}`8405`. -``` - -#### Loop Free Alternate (LFA) - -```{cfgcmd} set protocols isis fast-reroute lfa remote prefix-list \ \ - -This command enables IP fast re-routing that is part of {rfc}`5286`. -Specifically this is a prefix list which references a prefix in which -will select eligible PQ nodes for remote LFA backups. -``` - -```{cfgcmd} set protocols isis fast-reroute lfa local load-sharing disable \ - -This command disables the load sharing across multiple LFA backups. -``` - -```{cfgcmd} set protocols isis fast-reroute lfa local tiebreaker \ index \ \ - -This command will configure a tie-breaker for multiple local LFA backups. -The lower index numbers will be processed first. -``` - -```{cfgcmd} set protocols isis fast-reroute lfa local priority-limit \ \ - -This command will limit LFA backup computation up to the specified -prefix priority. -``` - -#### Segment Routing over IPv6 (SRv6) - -```{cfgcmd} set protocols isis segment-routing srv6 interface \ - -The dummy interface used -to install SRv6 SIDs into the Linux data plane. The interface must exist and -must be present when configuring IS-IS with -SRv6. -``` - -```{cfgcmd} set protocols isis segment-routing srv6 locator \ - -Specifies the SRv6 locator to use for IS-IS. IS-IS automatically allocates -prefix and adjacency SIDs, creates local SID entries and advertises them -into the IGP domain. -``` - -```{cfgcmd} set protocols isis segment-routing srv6 node-msd max-end-d \<0-255\> - -The Maximum End D MSD Type specifies the maximum number of SIDs present in an -SRH when performing decapsulation. As specified in {rfc}`8986`, the permitted -SID types include, but are not limited to, End.DX6, End.DT4, End.DT46, End -with USD, and End.X with USD. - -If the advertised value is zero or no value is advertised, then the router -cannot apply any behavior that results in decapsulation and forwarding of the -inner packet if the outer IPv6 header contains an SRH. - -Reference: {rfc}`9352` -``` - -```{cfgcmd} set protocols isis segment-routing srv6 node-msd max-end-pop \<0-255\> - -The Maximum End Pop MSD Type signals the maximum number of SIDs in the SRH to -which the router can apply "Penultimate Segment Pop (PSP) of the SRH" or -"Ultimate Segment Pop (USP) of the SRH" behavior, as defined in "Flavors" -(Section 4.16 of {rfc}`8986`). - -If the advertised value is zero or no value is advertised, then the router -cannot apply PSP or USP flavors. - -Reference: {rfc}`9352` -``` - -```{cfgcmd} set protocols isis segment-routing srv6 node-msd max-h-encaps \<0-255\> - -The Maximum H.Encaps MSD Type signals the maximum number of SIDs that can be -added to the segment list of an SRH as part of the "H.Encaps" behavior, as -defined in {rfc}`8986`. - -If the advertised value is zero or no value is advertised, then the headend -can apply an SR Policy that only contains one segment without inserting any -SRH header. A non-zero SRH Max H.encaps MSD indicates that the headend can -insert an SRH up to the advertised number of SIDs. - -Reference: {rfc}`9352` -``` - -```{cfgcmd} set protocols isis segment-routing srv6 node-msd max-segs-left \<0-255\> - -The Maximum Segments Left MSD Type signals the maximum value of the -"Segments Left" field ({rfc}`8754`) in the SRH of a received packet before -applying the Endpoint behavior associated with a SID. - -If no value is advertised, the supported value is 0. - -Reference: {rfc}`9352` -``` - -## Examples - -### Enable IS-IS - -**Node 1:** - -```none -set interfaces loopback lo address '192.168.255.255/32' -set interfaces ethernet eth1 address '192.0.2.1/24' - -set protocols isis interface eth1 -set protocols isis interface lo -set protocols isis net '49.0001.1921.6825.5255.00' -``` - -**Node 2:** - -```none -set interfaces ethernet eth1 address '192.0.2.2/24' - -set interfaces loopback lo address '192.168.255.254/32' -set interfaces ethernet eth1 address '192.0.2.2/24' - -set protocols isis interface eth1 -set protocols isis interface lo -set protocols isis net '49.0001.1921.6825.5254.00' -``` - -This gives us the following neighborships, Level 1 and Level 2: - -```none -Node-1@vyos:~$ show isis neighbor -Area VyOS: - System Id Interface L State Holdtime SNPA - vyos eth1 1 Up 28 0c87.6c09.0001 - vyos eth1 2 Up 28 0c87.6c09.0001 - -Node-2@vyos:~$ show isis neighbor -Area VyOS: - System Id Interface L State Holdtime SNPA - vyos eth1 1 Up 29 0c33.0280.0001 - vyos eth1 2 Up 28 0c33.0280.0001 -``` - -Here's the IP routes that are populated. Just the loopback: - -```none -Node-1@vyos:~$ show ip route isis -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -I 192.0.2.0/24 [115/20] via 192.0.2.2, eth1 inactive, weight 1, 00:02:22 -I>* 192.168.255.254/32 [115/20] via 192.0.2.2, eth1, weight 1, 00:02:22 - -Node-2@vyos:~$ show ip route isis -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -I 192.0.2.0/24 [115/20] via 192.0.2.1, eth1 inactive, weight 1, 00:02:21 -I>* 192.168.255.255/32 [115/20] via 192.0.2.1, eth1, weight 1, 00:02:21 -``` - -### Enable IS-IS and redistribute routes not natively in IS-IS - -**Node 1:** - -```none -set interfaces dummy dum0 address '203.0.113.1/24' -set interfaces ethernet eth1 address '192.0.2.1/24' - -set policy prefix-list EXPORT-ISIS rule 10 action 'permit' -set policy prefix-list EXPORT-ISIS rule 10 prefix '203.0.113.0/24' -set policy route-map EXPORT-ISIS rule 10 action 'permit' -set policy route-map EXPORT-ISIS rule 10 match ip address prefix-list 'EXPORT-ISIS' - -set protocols isis interface eth1 -set protocols isis net '49.0001.1921.6800.1002.00' -set protocols isis redistribute ipv4 connected level-2 route-map 'EXPORT-ISIS' -``` - -**Node 2:** - -```none -set interfaces ethernet eth1 address '192.0.2.2/24' - -set protocols isis interface eth1 -set protocols isis net '49.0001.1921.6800.2002.00' -``` - -Routes on Node 2: - -```none -Node-2@r2:~$ show ip route isis -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, - F - PBR, f - OpenFabric, - > - selected route, * - FIB route, q - queued route, r - rejected route - -I 203.0.113.0/24 [115/10] via 192.0.2.1, eth1, 00:03:42 -``` - -### Enable IS-IS and IGP-LDP synchronization - -**Node 1:** - -```none -set interfaces loopback lo address 192.168.255.255/32 -set interfaces ethernet eth0 address 192.0.2.1/24 - -set protocols isis interface eth0 -set protocols isis interface lo passive -set protocols isis ldp-sync -set protocols isis net 49.0001.1921.6825.5255.00 - -set protocols mpls interface eth0 -set protocols mpls ldp discovery transport-ipv4-address 192.168.255.255 -set protocols mpls ldp interface lo -set protocols mpls ldp interface eth0 -set protocols mpls ldp parameters transport-prefer-ipv4 -set protocols mpls ldp router-id 192.168.255.255 -``` - -This gives us IGP-LDP synchronization for all non-loopback interfaces with -a holddown timer of zero seconds: - -```none -Node-1@vyos:~$ show isis mpls ldp-sync -eth0 - LDP-IGP Synchronization enabled: yes - holddown timer in seconds: 0 - State: Sync achieved -``` - -### Enable IS-IS with Segment Routing (Experimental) - -**Node 1:** - -```none -set interfaces loopback lo address '192.168.255.255/32' -set interfaces ethernet eth1 address '192.0.2.1/24' - -set protocols isis interface eth1 -set protocols isis interface lo -set protocols isis net '49.0001.1921.6825.5255.00' -set protocols isis segment-routing global-block high-label-value '599' -set protocols isis segment-routing global-block low-label-value '550' -set protocols isis segment-routing prefix 192.168.255.255/32 index value '1' -set protocols isis segment-routing prefix 192.168.255.255/32 index explicit-null -set protocols mpls interface 'eth1' -``` - -**Node 2:** - -```none -set interfaces loopback lo address '192.168.255.254/32' -set interfaces ethernet eth1 address '192.0.2.2/24' - -set protocols isis interface eth1 -set protocols isis interface lo -set protocols isis net '49.0001.1921.6825.5254.00' -set protocols isis segment-routing global-block high-label-value '599' -set protocols isis segment-routing global-block low-label-value '550' -set protocols isis segment-routing prefix 192.168.255.254/32 index value '2' -set protocols isis segment-routing prefix 192.168.255.254/32 index explicit-null -set protocols mpls interface 'eth1' -``` - -This gives us MPLS segment routing enabled and labels for far end loopbacks: - -```none -Node-1@vyos:~$ show mpls table - Inbound Label Type Nexthop Outbound Label - ---------------------------------------------------------------------- - 552 SR (IS-IS) 192.0.2.2 IPv4 Explicit Null <-- Node-2 loopback learned on Node-1 - 15000 SR (IS-IS) 192.0.2.2 implicit-null - 15001 SR (IS-IS) fe80::e87:6cff:fe09:1 implicit-null - 15002 SR (IS-IS) 192.0.2.2 implicit-null - 15003 SR (IS-IS) fe80::e87:6cff:fe09:1 implicit-null - -Node-2@vyos:~$ show mpls table - Inbound Label Type Nexthop Outbound Label - --------------------------------------------------------------------- - 551 SR (IS-IS) 192.0.2.1 IPv4 Explicit Null <-- Node-1 loopback learned on Node-2 - 15000 SR (IS-IS) 192.0.2.1 implicit-null - 15001 SR (IS-IS) fe80::e33:2ff:fe80:1 implicit-null - 15002 SR (IS-IS) 192.0.2.1 implicit-null - 15003 SR (IS-IS) fe80::e33:2ff:fe80:1 implicit-null -``` - -Here is the routing tables showing the MPLS segment routing label operations: - -```none -Node-1@vyos:~$ show ip route isis -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -I 192.0.2.0/24 [115/20] via 192.0.2.2, eth1 inactive, weight 1, 00:07:48 -I>* 192.168.255.254/32 [115/20] via 192.0.2.2, eth1, label IPv4 Explicit Null, weight 1, 00:03:39 - -Node-2@vyos:~$ show ip route isis -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -I 192.0.2.0/24 [115/20] via 192.0.2.1, eth1 inactive, weight 1, 00:07:46 -I>* 192.168.255.255/32 [115/20] via 192.0.2.1, eth1, label IPv4 Explicit Null, weight 1, 00:03:43 -``` - -### Enable IS-IS with Segment Routing over IPv6 (Experimental) - -**Node 1:** - -```none -set interfaces dummy dum6 description "SRv6 IS-IS" -set interfaces ethernet eth1 address '192.0.2.1/24' -set interfaces loopback lo address '192.168.255.255/32' - -set protocols segment-routing srv6 locator MAIN prefix 2001:db8:1::/64 -set protocols segment-routing interface eth1 - -set protocols isis interface eth1 -set protocols isis interface lo -set protocols isis net '49.0001.1921.6825.5255.00' -set protocols isis segment-routing srv6 locator MAIN -set protocols isis segment-routing srv6 interface dum6 -``` - -**Node 2:** - -```none -set interfaces dummy dum6 description "SRv6 IS-IS" -set interfaces ethernet eth1 address '192.0.2.2/24' -set interfaces loopback lo address '192.168.255.254/32' - -set protocols segment-routing srv6 locator MAIN prefix 2001:db8:2::/64 -set protocols segment-routing interface eth1 - -set protocols isis interface eth1 -set protocols isis interface lo -set protocols isis net '49.0001.1921.6825.5254.00' -set protocols isis segment-routing srv6 locator MAIN -set protocols isis segment-routing srv6 interface dum6 -``` - -### Enable IS-IS with Segment Routing over IPv6 (uSID) (Experimental) - -**Node 1:** - -```none -set interfaces dummy dum6 description "SRv6 IS-IS" -set interfaces ethernet eth1 address '192.0.2.1/24' -set interfaces loopback lo address '192.168.255.255/32' - -set protocols segment-routing interface eth1 -set protocols segment-routing srv6 locator MAIN prefix 2001:db8:1::/48 -set protocols segment-routing srv6 locator MAIN behavior-usid -set protocols segment-routing srv6 locator MAIN block-len 32 -set protocols segment-routing srv6 locator MAIN format usid-f3216 -set protocols segment-routing srv6 locator MAIN func-bits 16 -set protocols segment-routing srv6 locator MAIN node-len 16 - -set protocols isis interface eth1 -set protocols isis interface lo -set protocols isis net '49.0001.1921.6825.5255.00' -set protocols isis segment-routing srv6 interface dum6 -set protocols isis segment-routing srv6 locator MAIN -``` - -**Node 2:** - -```none -set interfaces dummy dum6 description "SRv6 IS-IS" -set interfaces ethernet eth1 address '192.0.2.2/24' -set interfaces loopback lo address '192.168.255.254/32' - -set protocols segment-routing interface eth1 -set protocols segment-routing srv6 locator MAIN prefix 2001:db8:2::/48 -set protocols segment-routing srv6 locator MAIN behavior-usid -set protocols segment-routing srv6 locator MAIN block-len 32 -set protocols segment-routing srv6 locator MAIN format usid-f3216 -set protocols segment-routing srv6 locator MAIN func-bits 16 -set protocols segment-routing srv6 locator MAIN node-len 16 - -set protocols isis interface eth1 -set protocols isis interface lo -set protocols isis net '49.0001.1921.6825.5254.00' -set protocols isis segment-routing srv6 interface dum6 -set protocols isis segment-routing srv6 locator MAIN -``` diff --git a/docs/configuration/protocols/md-arp.md b/docs/configuration/protocols/md-arp.md new file mode 100644 index 00000000..7d9bf4f9 --- /dev/null +++ b/docs/configuration/protocols/md-arp.md @@ -0,0 +1,72 @@ +```{eval-rst} +.. meta:: + :description: The Address Resolution Protocol (ARP) resolves + network-layer addresses to link-layer MAC addresses. + :keywords: arp, network, protocol, mac, address, ipv4, static +``` + +(routing_static_arp)= + +# ARP + +The {abbr}`ARP (Address Resolution Protocol)` resolves IPv4 network layer addresses +to link layer MAC addresses. +addresses. This mapping is essential for communication within the Internet +Protocol suite. ARP was standardized in 1982 by {rfc}`826` (STD 37). + +:::{note} +In Internet Protocol version 6 (IPv6) networks, address resolution is +performed by the Neighbor Discovery Protocol (NDP). +::: + +Use the following commands to configure or view ARP table entries. + +## Configuration + +```{eval-rst} +.. cfgcmd:: set protocols static arp interface address mac + + **Configure a static ARP entry on the specified interface.** + + This creates a permanent mapping between an IP address and a MAC address + on the specified interface. + + Example: + + .. code-block:: none + + set protocols static arp interface eth0 address 192.0.2.1 mac 01:23:45:67:89:01 +``` + +## Operation + +```{eval-rst} +.. opcmd:: show protocols static arp + + Show all ARP table entries across all interfaces. + + .. code-block:: none + + vyos@vyos:~$ show protocols static arp + Address HWtype HWaddress Flags Mask Iface + 10.1.1.1 ether 00:53:00:de:23:2e C eth1 + 10.1.1.100 ether 00:53:00:de:23:aa CM eth1 +``` + +```{eval-rst} +.. opcmd:: show protocols static arp interface + + Show all ARP table entries for the specific interface. + + Example for ``eth1``: + + .. code-block:: none + + vyos@vyos:~$ show protocols static arp interface eth1 + Address HWtype HWaddress Flags Mask Iface + 10.1.1.1 ether 00:53:00:de:23:2e C eth1 + 10.1.1.100 ether 00:53:00:de:23:aa CM eth1 +``` + +[arp]: https://en.wikipedia.org/wiki/Address_Resolution_Protocol + diff --git a/docs/configuration/protocols/md-babel.md b/docs/configuration/protocols/md-babel.md new file mode 100644 index 00000000..b03e9fa4 --- /dev/null +++ b/docs/configuration/protocols/md-babel.md @@ -0,0 +1,296 @@ +```{eval-rst} +.. meta:: + :description: The Babel routing protocol provides robust and efficient + routing for wired and wireless mesh networks. + :keywords: babel, routing, protocol, wireless, mesh, network, metric, + ipv4, ipv6 +``` + +(babel)= + +# Babel + +The Babel protocol provides robust and efficient routing for both wired and +wireless mesh networks. By default, Babel uses hop-count metrics on wired links +and a variant of Expected Transmission Count (ETX) on wireless links. +Administrators can configure Babel to account for radio diversity, +automatically compute link latency, and include that latency in the routing +metric. {rfc}`8966` defines the Babel protocol. + +Babel is a dual-stack protocol. A single Babel instance routes both IPv4 and +IPv6 traffic simultaneously. + +## General configuration + +VyOS does not require a specific command to start the Babel process. The system +automatically starts the routing process when you configure the first +Babel-enabled interface. + +```{cfgcmd} set protocols babel interface \ + +**Enable Babel routing on the specified interface.** + +The system immediately begins sending and receiving Babel packets on this +interface. +``` + +## Optional configuration + +```{cfgcmd} set protocols babel parameters diversity + +**Enable radio-frequency diversity routing for the Babel process.** + +Enabling this feature is highly recommended for networks with many +wireless nodes. + +:::{note} +When you enable diversity routing, you should also configure the +``diversity-factor`` and ``channel`` parameters. +::: +``` + +```{cfgcmd} set protocols babel parameters diversity-factor \<1-256\> + +**Configure the multiplicative factor for diversity routing, in units of +1/256.** + +Lower multiplicative factors give greater weight to diversity in route +selection. The default value is 256, which disables diversity routing. +On nodes with multiple independent radios, configure a value of 128 or less. +``` + +```{cfgcmd} set protocols babel parameters resend-delay \<20-655340\> + +**Configure the delay in milliseconds before the system resends an +important request or update.** + +The default value is 2000 ms. +``` + +```{cfgcmd} set protocols babel parameters smoothing-half-life \<0-65534\> + +**Configure the time constant, in seconds, for the smoothing algorithm used +to implement hysteresis.** + +Higher values reduce route oscillation but slightly increase convergence +time. A value of 0 disables hysteresis and is suitable for wired networks. +The default is 4 seconds. +``` + +## Interfaces configuration + +```{cfgcmd} set protocols babel interface \ type \ + +**Configure the network type for the Babel-enabled interface.** + +Choose from the following: + +* ``auto``: Babel automatically detects if an interface is wired or + wireless. +* ``wired``: Babel enables optimizations for wired interfaces. +* ``wireless``: Babel disables optimizations suitable only for wired + interfaces. Specifying wireless is always correct, but may cause slower + convergence and increased routing traffic. +``` + +```{cfgcmd} set protocols babel interface \ split-horizon \ + +**Configure the split-horizon routing behavior for the specified +interface.** + +Use one of the following options: + +* ``default``: Babel automatically enables split-horizon on wired + interfaces and disables it on wireless interfaces. +* ``enable``: Babel enables split-horizon on the interface. This + optimization should be used only on symmetric, transitive (wired) + networks. +* ``disable``: Babel disables split-horizon on the interface. Disabling + split-horizon is always safe and correct. +``` + +```{cfgcmd} set protocols babel interface \ hello-interval \<20-655340\> + +**Configure the interval, in milliseconds, between scheduled hello messages +on the specified interface.** + +On wired links, Babel detects link failures within two hello intervals. +On wireless links, link quality is reestimated at each interval. The +default is 4000 ms. +``` + +```{cfgcmd} set protocols babel interface \ update-interval \<20-655340\> + +**Configure the interval, in milliseconds, between scheduled routing +updates on the specified interface.** + +Because Babel uses triggered updates extensively, you can increase this +value on reliable links with minimal packet loss. The default is 20000 ms. +``` + +```{cfgcmd} set protocols babel interface \ rxcost \<1-65534\> + +**Configure the base receive cost for the specified interface.** + +Babel applies this value based on the configured network type: + +* ``wired``: The value is the routing cost advertised to neighboring + routers. +* ``wireless``: The value is a multiplier used to compute the ETX + (Expected Transmission Count) reception cost. + +The default value is 256. +``` + +```{cfgcmd} set protocols babel interface \ rtt-decay \<1-256\> + +**Configure the decay factor for the exponential moving average of RTT +samples, in units of 1/256.** + +Higher values discard older samples faster. The default value is 42. +``` + +```{cfgcmd} set protocols babel interface \ rtt-min \<1-65535\> + +**Configure the minimum RTT, in milliseconds, at which the cost to a +neighbor begins to increase.** + +The additional cost is linear in (rtt - rtt-min). The default value is 10 ms. +``` + +```{cfgcmd} set protocols babel interface \ rtt-max \<1-65535\> + +**Configure the maximum RTT, in milliseconds, above which the cost to a +neighbor stops increasing.** + +The default value is 120 ms. +``` + +```{cfgcmd} set protocols babel interface \ max-rtt-penalty \<0-65535\> + +**Configure the maximum cost added to a neighbor when RTT meets or exceeds +rtt-max.** + +Setting this value to 0 disables RTT-based costs. The default value is 150. +``` + +```{cfgcmd} set protocols babel interface \ enable-timestamps + +**Configure adding timestamps to each Hello and IHU message to calculate +RTT values.** + +Enabling timestamps is recommended for tunnel interfaces. +``` + +```{cfgcmd} set protocols babel interface \ channel \<1-254|interfering|noninterfering\> + +**Configure the channel identifier that diversity routing uses for the +specified interface.** + +Interfaces interfere with each other based on the assigned channel +identifier: + +* ``1–254``: The interface interferes with interfaces sharing the same + channel number and with interfaces configured as ``interfering``. +* ``interfering``: The interface interferes with all others except those + configured as ``noninterfering``. +* ``noninterfering``: The interface interferes only with itself. +``` + +## Redistribution configuration + +```{cfgcmd} set protocols babel redistribute \ \ + +**Configure the redistribution of routing information from the specified +route source into the Babel process.** + +The following route sources are available: + +* **ipv4:** ``bgp``, ``connected``, ``eigrp``, ``isis``, ``kernel``, + ``nhrp``, ``ospf``, ``rip``, ``static`` +* **ipv6:** ``bgp``, ``connected``, ``eigrp``, ``isis``, ``kernel``, + ``nhrp``, ``ospfv3``, ``ripng``, ``static`` +``` + +```{cfgcmd} set protocols babel distribute-list \ access-list \ \ + +**Configure global Babel route filtering using an access list.** + +Specify the direction in which the access list is applied: + +* ``in``: Filters incoming routes. +* ``out``: Filters outgoing routes. +``` + +```{cfgcmd} set protocols babel distribute-list \ interface \ access-list \ \ + +**Configure Babel route filtering on the specified interface using an +access list.** + +Specify the direction in which the access list is applied: + +* ``in``: Filters incoming routes. +* ``out``: Filters outgoing routes. +``` + +```{cfgcmd} set protocols babel distribute-list \ prefix-list \ \ + +**Configure global Babel route filtering using a prefix list.** + +Specify the direction in which the prefix list is applied: + +* ``in``: Filters incoming routes. +* ``out``: Filters outgoing routes. +``` + +```{cfgcmd} set protocols babel distribute-list \ interface \ prefix-list \ \ + +**Configure Babel route filtering on the specified interface using a +prefix list.** + +Specify the direction in which the prefix list is applied: + +* ``in``: Filters incoming routes. +* ``out``: Filters outgoing routes. +``` + +## Configuration example + +### Basic two-node babel network + +**Goal:** The following example connects two routers (Node 1 and Node 2) via +their eth0 interfaces and uses the Babel routing protocol to advertise +(redistribute) each router's locally configured networks (represented by +loopback addresses) to one another. + +**Node 1:** + +```none +# Configure the loopback (local networks) and physical (eth0) addresses +set interfaces loopback lo address 10.1.1.1/32 +set interfaces loopback lo address fd12:3456:dead:beef::1/128 +set interfaces ethernet eth0 address 192.168.1.1/24 + +# Enable Babel on the physical link +set protocols babel interface eth0 type wired + +# Instruct Babel to advertise (redistribute) the locally configured networks +set protocols babel redistribute ipv4 connected +set protocols babel redistribute ipv6 connected +``` + +**Node 2:** + +```none +# Configure the loopback (local networks) and physical (eth0) addresses +set interfaces loopback lo address 10.2.2.2/32 +set interfaces loopback lo address fd12:3456:beef:dead::2/128 +set interfaces ethernet eth0 address 192.168.1.2/24 + +# Enable Babel on the physical link +set protocols babel interface eth0 type wired + +# Tell Babel to advertise (redistribute) the locally configured networks +set protocols babel redistribute ipv4 connected +set protocols babel redistribute ipv6 connected +``` diff --git a/docs/configuration/protocols/md-bfd.md b/docs/configuration/protocols/md-bfd.md new file mode 100644 index 00000000..59541abc --- /dev/null +++ b/docs/configuration/protocols/md-bfd.md @@ -0,0 +1,205 @@ +--- +lastproofread: '2023-01-27' +--- + +```{include} /_include/need_improvement.txt +``` + +(routing-bfd)= + +# BFD + +{abbr}`BFD (Bidirectional Forwarding Detection)` is described and extended by +the following RFCs: {rfc}`5880`, {rfc}`5881` and {rfc}`5883`. + +In the age of very fast networks, a second of unreachability may equal millions of lost packets. +The idea behind BFD is to detect very quickly when a peer is down and take action extremely fast. + +BFD sends lots of small UDP packets very quickly to ensures that the peer is still alive. + +This allows avoiding the timers defined in BGP and OSPF protocol to expires. + +## Configure BFD + +```{cfgcmd} set protocols bfd peer \ + +Set BFD peer IPv4 address or IPv6 address +``` + +```{cfgcmd} set protocols bfd peer \ echo-mode + +Enables the echo transmission mode +``` + +```{cfgcmd} set protocols bfd peer \ multihop + +Allow this BFD peer to not be directly connected +``` + +```{cfgcmd} set protocols bfd peer \ source [address \ | interface \] + +Bind listener to specific interface/address, mandatory for IPv6 +``` + +```{cfgcmd} set protocols bfd peer \ interval echo-interval \<10-60000\> + +The minimal echo receive transmission interval that this system is +capable of handling +``` + +```{cfgcmd} set protocols bfd peer \ interval multiplier \<2-255\> + +Remote transmission interval will be multiplied by this value +``` + +```{cfgcmd} set protocols bfd peer \ interval [receive | transmit] \<10-60000\> + +Interval in milliseconds +``` + +```{cfgcmd} set protocols bfd peer \ shutdown + +Disable a BFD peer +``` + +```{cfgcmd} set protocols bfd peer \ minimum-ttl \<1-254\> + +For multi hop sessions only. Configure the minimum expected TTL for an +incoming BFD control packet. + +This feature serves the purpose of thightening the packet validation +requirements to avoid receiving BFD control packets from other sessions. +``` + +### Enable BFD in BGP + +```{cfgcmd} set protocols bgp neighbor \ bfd + +Enable BFD on a single BGP neighbor +``` + +```{cfgcmd} set protocols bgp peer-group \ bfd + +Enable BFD on a BGP peer group +``` + +### Enable BFD in OSPF + +```{cfgcmd} set protocols ospf interface \ bfd + + Enable BFD for OSPF on an interface + +``` + +```{cfgcmd} set protocols ospfv3 interface \ bfd + +Enable BFD for OSPFv3 on an interface +``` + +### Enable BFD in ISIS + +```{cfgcmd} set protocols isis \ interface \ bfd + +Enable BFD for ISIS on an interface + +``` + +## Operational Commands + +```{opcmd} show bfd peers + + Show all BFD peers + + :::{code-block} none + BFD Peers: + peer 198.51.100.33 vrf default interface eth4.100 + ID: 4182341893 + Remote ID: 12678929647 + Status: up + Uptime: 1 month(s), 16 hour(s), 29 minute(s), 38 second(s) + Diagnostics: ok + Remote diagnostics: ok + Local timers: + Receive interval: 300ms + Transmission interval: 300ms + Echo transmission interval: 50ms + Remote timers: + Receive interval: 300ms + Transmission interval: 300ms + Echo transmission interval: 0ms + + peer 198.51.100.55 vrf default interface eth4.101 + ID: 4618932327 + Remote ID: 3312345688 + Status: up + Uptime: 20 hour(s), 16 minute(s), 19 second(s) + Diagnostics: ok + Remote diagnostics: ok + Local timers: + Receive interval: 300ms + Transmission interval: 300ms + Echo transmission interval: 50ms + Remote timers: + Receive interval: 300ms + Transmission interval: 300ms + Echo transmission interval: 0ms + ::: +``` + +## BFD Static Route Monitoring + + +A monitored static route conditions the installation to the RIB on the BFD +session running state: when BFD session is up the route is installed to RIB, +but when the BFD session is down it is removed from the RIB. + + +### Configuration + +```{cfgcmd} set protocols static route \ next-hop \ bfd profile \ + +Configure a static route for \ using gateway \ +and use the gateway address as BFD peer destination address. +``` + +```{cfgcmd} set protocols static route \ next-hop \ bfd multi-hop source \ profile \ + +Configure a static route for \ using gateway \, +use source address to indentify the peer when is multi-hop session +and the gateway address as BFD peer destination address. +``` + +```{cfgcmd} set protocols static route6 \ next-hop \ bfd profile \ + +Configure a static route for \ using gateway \ +and use the gateway address as BFD peer destination address. +``` + +```{cfgcmd} set protocols static route6 \ next-hop \ bfd multi-hop source \ profile \ + +Configure a static route for \ using gateway \, +use source address to indentify the peer when is multi-hop session +and the gateway address as BFD peer destination address. +``` + +(bfd-operational-commands)= + +## Operational Commands + +```{opcmd} show bfd static routes + +Showing BFD monitored static routes + +:::{code-block} none +Showing BFD monitored static routes: + + Next hops: + VRF default IPv4 Unicast: + 10.10.13.3/32 peer 192.168.2.3 (status: installed) + 172.16.10.3/32 peer 192.168.10.1 (status: uninstalled) + + VRF default IPv4 Multicast: + + VRF default IPv6 Unicast: +::: +``` \ No newline at end of file diff --git a/docs/configuration/protocols/md-bgp.md b/docs/configuration/protocols/md-bgp.md new file mode 100644 index 00000000..0af79f6e --- /dev/null +++ b/docs/configuration/protocols/md-bgp.md @@ -0,0 +1,1414 @@ +(routing-bgp)= + +# BGP + +{abbr}`BGP (Border Gateway Protocol)` is one of the Exterior Gateway Protocols +and the de facto standard interdomain routing protocol. The latest BGP version +is 4. BGP-4 is described in {rfc}`1771` and updated by {rfc}`4271`. {rfc}`2858` +adds multiprotocol support to BGP. + +VyOS makes use of {abbr}`FRR (Free Range Routing)` and we would like to thank +them for their effort! + +## Basic Concepts + +(bgp-autonomous-systems)= + +### Autonomous Systems + +From {rfc}`1930`: + +> An AS is a connected group of one or more IP prefixes run by one or more +> network operators which has a SINGLE and CLEARLY DEFINED routing policy. + +Each {abbr}`AS (Autonomous System)` has an identifying number associated with it +called an {abbr}`ASN (Autonomous System Number)`. This is a two octet value +ranging in value from 1 to 65535. The AS numbers 64512 through 65535 are defined +as private AS numbers. Private AS numbers must not be advertised on the global +Internet. The 2-byte AS number range has been exhausted. 4-byte AS numbers are +specified in {rfc}`6793`, and provide a pool of 4294967296 AS numbers. + +The {abbr}`ASN (Autonomous System Number)` is one of the essential elements of +BGP. BGP is a distance vector routing protocol, and the AS-Path framework +provides distance vector metric and loop detection to BGP. + +```{cfgcmd} set protocols bgp system-as \ + +Set local {abbr}`ASN (Autonomous System Number)` that this router represents. +This is a a mandatory option! +``` + +(bgp-address-families)= + + +### Address Families + + +Multiprotocol extensions enable BGP to carry routing information for multiple +network layer protocols. BGP supports an Address Family Identifier (AFI) for +IPv4 and IPv6. + + +(bgp-route-selection)= + + +### Route Selection + + +The route selection process used by FRR's BGP implementation uses the following +decision criterion, starting at the top of the list and going towards the +bottom until one of the factors can be used. + + +01. **Weight check** + + + Prefer higher local weight routes to lower routes. + + +02. **Local preference check** + + + Prefer higher local preference routes to lower. + + +03. **Local route check** + + + Prefer local routes (statics, aggregates, redistributed) to received routes. + + +04. **AS path length check** + + + Prefer shortest hop-count AS_PATHs. + + +05. **Origin check** + + + Prefer the lowest origin type route. That is, prefer IGP origin routes to + EGP, to Incomplete routes. + + +06. **MED check** + + + Where routes with a MED were received from the same AS, prefer the route + with the lowest MED. + + +07. **External check** + + + Prefer the route received from an external, eBGP peer over routes received + from other types of peers. + + +08. **IGP cost check** + + + Prefer the route with the lower IGP cost. + + +09. **Multi-path check** + + + If multi-pathing is enabled, then check whether the routes not yet + distinguished in preference may be considered equal. If + {cfgcmd}`bgp bestpath as-path multipath-relax` is set, all such routes are + considered equal, otherwise routes received via iBGP with identical AS_PATHs + or routes received from eBGP neighbours in the same AS are considered equal. + + +10. **Already-selected external check** + + + Where both routes were received from eBGP peers, then prefer the route + which is already selected. Note that this check is not applied if + {cfgcmd}`bgp bestpath compare-routerid` is configured. This check can + prevent some cases of oscillation. + + +11. **Router-ID check** + + + Prefer the route with the lowest router-ID. If the route has an + ORIGINATOR_ID attribute, through iBGP reflection, then that router ID is + used, otherwise the router-ID of the peer the route was received from is + used. + + +12. **Cluster-List length check** + + + The route with the shortest cluster-list length is used. The cluster-list + reflects the iBGP reflection path the route has taken. + + +13. **Peer address** + + + Prefer the route received from the peer with the higher transport layer + address, as a last-resort tie-breaker. + + +(bgp-capability-negotiation)= + + +### Capability Negotiation + + +When adding IPv6 routing information exchange feature to BGP. There were some +proposals. {abbr}`IETF (Internet Engineering Task Force)` +{abbr}`IDR (Inter Domain Routing)` adopted a proposal called Multiprotocol +Extension for BGP. The specification is described in {rfc}`2283`. The protocol +does not define new protocols. It defines new attributes to existing BGP. When +it is used exchanging IPv6 routing information it is called BGP-4+. When it is +used for exchanging multicast routing information it is called MBGP. + + +*bgpd* supports Multiprotocol Extension for BGP. So if a remote peer supports +the protocol, *bgpd* can exchange IPv6 and/or multicast routing information. + + +Traditional BGP did not have the feature to detect a remote peer's +capabilities, e.g. whether it can handle prefix types other than IPv4 unicast +routes. This was a big problem using Multiprotocol Extension for BGP in an +operational network. {rfc}`2842` adopted a feature called Capability +Negotiation. *bgpd* use this Capability Negotiation to detect the remote peer's +capabilities. If a peer is only configured as an IPv4 unicast neighbor, *bgpd* +does not send these Capability Negotiation packets (at least not unless other +optional BGP features require capability negotiation). + + +By default, FRR will bring up peering with minimal common capability for the +both sides. For example, if the local router has unicast and multicast +capabilities and the remote router only has unicast capability the local router +will establish the connection with unicast only capability. When there are no +common capabilities, FRR sends Unsupported Capability error and then resets the +connection. + + +## Configuration + + +(bgp-router-configuration)= + + +### BGP Router Configuration + + +First of all you must configure BGP router with the {abbr}`ASN (Autonomous +System Number)`. The AS number is an identifier for the autonomous system. +The BGP protocol uses the AS number for detecting whether the BGP connection +is internal or external. VyOS does not have a special command to start the BGP +process. The BGP process starts when the first neighbor is configured. + +```{cfgcmd} set protocols bgp system-as \ + +Set local autonomous system number that this router represents. This is a +mandatory option! +``` + +#### Peers Configuration + + +##### Defining Peers + +```{cfgcmd} set protocols bgp neighbor \ remote-as \ + +This command creates a new neighbor whose remote-as is \. The neighbor +address can be an IPv4 address or an IPv6 address or an interface to use +for the connection. The command is applicable for peer and peer group. +``` + + +```{cfgcmd} set protocols bgp neighbor \ remote-as internal + +Create a peer as you would when you specify an ASN, except that if the +peers ASN is different than mine as specified under the {cfgcmd}`protocols +bgp ` command the connection will be denied. +``` + + +```{cfgcmd} set protocols bgp neighbor \ remote-as external + +Create a peer as you would when you specify an ASN, except that if the +peers ASN is the same as mine as specified under the {cfgcmd}`protocols +bgp ` command the connection will be denied. +``` + + +```{cfgcmd} set protocols bgp neighbor \ remote-as auto + +Create a peer as you would when you specify an ASN, except that the peers +remote ASN is detected automatically from the OPEN message. +``` + + +```{cfgcmd} set protocols bgp neighbor \ local-role \ [strict] + +BGP roles are defined in RFC {rfc}`9234` and provide an easy way to +add route leak prevention, detection and mitigation. The local Role +value is negotiated with the new BGP Role capability which has a +built-in check of the corresponding value. In case of a mismatch the +new OPEN Roles Mismatch Notification <2, 11> would be sent. +The correct Role pairs are: + +Provider - Customer + +Peer - Peer + +RS-Server - RS-Client + +If {cfgcmd}`strict` is set the BGP session won’t become established +until the BGP neighbor sets local Role on its side. This +configuration parameter is defined in RFC {rfc}`9234` and is used to +enforce the corresponding configuration at your counter-parts side. + +Routes that are sent from provider, rs-server, or the peer local-role +(or if received by customer, rs-client, or the peer local-role) will +be marked with a new Only to Customer (OTC) attribute. + +Routes with this attribute can only be sent to your neighbor if your +local-role is provider or rs-server. Routes with this attribute can +be received only if your local-role is customer or rs-client. + +In case of peer-peer relationship routes can be received only if OTC +value is equal to your neighbor AS number. + +All these rules with OTC will help to detect and mitigate route leaks +and happen automatically if local-role is set. +``` + + +```{cfgcmd} set protocols bgp neighbor \ shutdown + +This command disable the peer or peer group. To reenable the peer use +the delete form of this command. +``` + + +```{cfgcmd} set protocols bgp neighbor \ description \ + +Set description of the peer or peer group. +``` + + +```{cfgcmd} set protocols bgp neighbor \ update-source \ + +Specify the IPv4 source address to use for the BGP session to this neighbor, +may be specified as either an IPv4 address directly or as an interface name. +``` + +(bgp-capability-negotiation-1)= + + +##### Capability Negotiation + +```{cfgcmd} set protocols bgp neighbor \ capability dynamic + +This command would allow the dynamic update of capabilities over an +established BGP session. +``` + + +```{cfgcmd} set protocols bgp neighbor \ capability extended-nexthop + +Allow bgp to negotiate the extended-nexthop capability with it’s peer. +If you are peering over a IPv6 Link-Local address then this capability +is turned on automatically. If you are peering over a IPv6 Global Address +then turning on this command will allow BGP to install IPv4 routes with +IPv6 nexthops if you do not have IPv4 configured on interfaces. +``` + + +```{cfgcmd} set protocols bgp neighbor \ disable-capability-negotiation + +Suppress sending Capability Negotiation as OPEN message optional +parameter to the peer. This command only affects the peer is +configured other than IPv4 unicast configuration. + +When remote peer does not have capability negotiation feature, +remote peer will not send any capabilities at all. In that case, +bgp configures the peer with configured capabilities. + +You may prefer locally configured capabilities more than the negotiated +capabilities even though remote peer sends capabilities. If the peer is +configured by {cfgcmd}`override-capability`, VyOS ignores received +capabilities then override negotiated capabilities with configured values. + +Additionally you should keep in mind that this feature fundamentally +disables the ability to use widely deployed BGP features. BGP unnumbered, +hostname support, AS4, Addpath, Route Refresh, ORF, Dynamic Capabilities, +and graceful restart. +``` + + +```{cfgcmd} set protocols bgp neighbor \ override-capability + +This command allow override the result of Capability Negotiation with +local configuration. Ignore remote peer’s capability value. +``` + + +```{cfgcmd} set protocols bgp neighbor \ strict-capability-match + +This command forces strictly compare remote capabilities and local +capabilities. If capabilities are different, send Unsupported Capability +error then reset connection. + +You may want to disable sending Capability Negotiation OPEN message +optional parameter to the peer when remote peer does not implement +Capability Negotiation. Please use {cfgcmd}`disable-capability-negotiation` +command to disable the feature. +``` + +##### Peer Parameters + +```{cfgcmd} set protocols bgp neighbor \ address-family \ allowas-in number \ + +This command accept incoming routes with AS path containing AS +number with the same value as the current system AS. This is +used when you want to use the same AS number in your sites, +but you can’t connect them directly. + + The number parameter (1-10) configures the amount of accepted + occurences of the system AS number in AS path. + + This command is only allowed for eBGP peers. It is not applicable + for peer groups. +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ as-override + +This command override AS number of the originating router with +the local AS number. + +Usually this configuration is used in PEs (Provider Edge) to +replace the incoming customer AS number so the connected CE ( +Customer Edge) can use the same AS number as the other customer +sites. This allows customers of the provider network to use the +same AS number across their sites. + +This command is only allowed for eBGP peers. +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ attribute-unchanged \ + +This command specifies attributes to be left unchanged for +advertisements sent to a peer or peer group. +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ maximum-prefix \ + +This command specifies a maximum number of prefixes we can receive +from a given peer. If this number is exceeded, the BGP session +will be destroyed. The number range is 1 to 4294967295. +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ nexthop-self + +This command forces the BGP speaker to report itself as the +next hop for an advertised route it advertised to a neighbor. +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ remove-private-as + +This command removes the private ASN of routes that are advertised +to the configured peer. It removes only private ASNs on routes +advertised to EBGP peers. + +If the AS-Path for the route has only private ASNs, the private +ASNs are removed. + +If the AS-Path for the route has a private ASN between public +ASNs, it is assumed that this is a design choice, and the +private ASN is not removed. +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ soft-reconfiguration inbound + +Changes in BGP policies require the BGP session to be cleared. Clearing has a +large negative impact on network operations. Soft reconfiguration enables you +to generate inbound updates from a neighbor, change and activate BGP policies +without clearing the BGP session. + +This command specifies that route updates received from this neighbor will be +stored unmodified, regardless of the inbound policy. When inbound soft +reconfiguration is enabled, the stored updates are processed by the new +policy configuration to create new inbound updates. + +:::{note} +Storage of route updates uses memory. If you enable soft +reconfiguration inbound for multiple neighbors, the amount of memory used +can become significant. +::: +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ weight \ + +This command specifies a default weight value for the neighbor’s +routes. The number range is 1 to 65535. +``` + + +```{cfgcmd} set protocols bgp neighbor \ advertisement-interval \ + +This command specifies the minimum route advertisement interval for +the peer. The interval value is 0 to 600 seconds, with the default +advertisement interval being 0. +``` + + +```{cfgcmd} set protocols bgp neighbor \ disable-connected-check + +This command allows peerings between directly connected eBGP peers +using loopback addresses without adjusting the default TTL of 1. +``` + + +```{cfgcmd} set protocols bgp neighbor \ disable-send-community \ + +This command specifies that the community attribute should not be sent +in route updates to a peer. By default community attribute is sent. +``` + + +```{cfgcmd} set protocols bgp neighbor \ ebgp-multihop \ + +This command allows sessions to be established with eBGP neighbors +when they are multiple hops away. When the neighbor is not directly +connected and this knob is not enabled, the session will not establish. +The number of hops range is 1 to 255. This command is mutually +exclusive with {cfgcmd}`ttl-security hops`. +``` + + +```{cfgcmd} set protocols bgp neighbor \ local-as \ [no-prepend] [replace-as] + +Specify an alternate AS for this BGP process when interacting with +the specified peer or peer group. With no modifiers, the specified +local-as is prepended to the received AS_PATH when receiving routing +updates from the peer, and prepended to the outgoing AS_PATH (after +the process local AS) when transmitting local routes to the peer. + +If the {cfgcmd}`no-prepend` attribute is specified, then the supplied +local-as is not prepended to the received AS_PATH. + +If the {cfgcmd}`replace-as` attribute is specified, then only the supplied +local-as is prepended to the AS_PATH when transmitting local-route +updates to this peer. + +:::{note} +This command is only allowed for eBGP peers. +::: +``` + + +```{cfgcmd} set protocols bgp neighbor \ passive + +Configures the BGP speaker so that it only accepts inbound connections +from, but does not initiate outbound connections to the peer or peer group. +``` + + +```{cfgcmd} set protocols bgp neighbor \ password \ + +This command specifies a MD5 password to be used with the tcp socket that +is being used to connect to the remote peer. +``` + + +```{cfgcmd} set protocols bgp neighbor \ ttl-security hops \ + +This command enforces Generalized TTL Security Mechanism (GTSM), +as specified in {rfc}`5082`. With this command, only neighbors +that are specified number of hops away will be allowed to +become neighbors. The number of hops range is 1 to 254. This +command is mutually exclusive with {cfgcmd}`ebgp-multihop`. +``` + +##### Peer Groups + +Peer groups are used to help improve scaling by generating the same update +information to all members of a peer group. Note that this means that the +routes generated by a member of a peer group will be sent back to that +originating peer with the originator identifier attribute set to indicated +the originating peer. All peers not associated with a specific peer group +are treated as belonging to a default peer group, and will share updates. + +```{cfgcmd} set protocols bgp peer-group \ + + This command defines a new peer group. You can specify to the group the same + parameters that you can specify for specific neighbors. + + :::{note} + If you apply a parameter to an individual neighbor IP address, you + override the action defined for a peer group that includes that IP + address. + ::: +``` + + +```{cfgcmd} set protocols bgp neighbor \ peer-group \ + +This command bind specific peer to peer group with a given name. +``` + +#### Network Advertisement Configuration + +```{cfgcmd} set protocols bgp address-family \ network \ + +This command is used for advertising IPv4 or IPv6 networks. + + :::{note} + By default, the BGP prefix is advertised even if it's not present + in the routing table. This behaviour differs from the implementation of + some vendors. + ::: +``` + + +```{cfgcmd} set protocols bgp parameters network-import-check + +This configuration modifies the behavior of the network statement. If you +have this configured the underlying network must exist in the routing table. +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ default-originate [route-map \] + +By default, VyOS does not advertise a default route (0.0.0.0/0) even if it is +in routing table. When you want to announce default routes to the peer, use +this command. Using optional argument {cfgcmd}`route-map` you can inject the +default route to given neighbor only if the conditions in the route map are +met. +``` + +#### Route Aggregation Configuration + +```{cfgcmd} set protocols bgp address-family \ aggregate-address \ + +This command specifies an aggregate address. The router will also +announce longer-prefixes inside of the aggregate address. +``` + + +```{cfgcmd} set protocols bgp address-family \ aggregate-address \ as-set + +This command specifies an aggregate address with a mathematical set of +autonomous systems. This command summarizes the AS_PATH attributes of +all the individual routes. +``` + + +```{cfgcmd} set protocols bgp address-family \ aggregate-address \ summary-only + +This command specifies an aggregate address and provides that +longer-prefixes inside of the aggregate address are suppressed +before sending BGP updates out to peers. +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ unsuppress-map \ + +This command applies route-map to selectively unsuppress prefixes +suppressed by summarisation. +``` + +#### Redistribution Configuration + +```{cfgcmd} set protocols bgp address-family \ redistribute + +This command redistributes routing information from the given route source +to the BGP process. There are six modes available for route source: +connected, kernel, ospf, rip, static, table. +``` + + +```{cfgcmd} set protocols bgp address-family \ redistribute metric \ + +This command specifies metric (MED) for redistributed routes. The +metric range is 0 to 4294967295. There are six modes available for +route source: connected, kernel, ospf, rip, static, table. +``` + + +```{cfgcmd} set protocols bgp address-family \ redistribute route-map \ + +This command allows to use route map to filter redistributed routes. +There are six modes available for route source: connected, kernel, +ospf, rip, static, table. +``` + +#### General Configuration +##### Common parameters + +```{cfgcmd} set protocols bgp parameters allow-martian-nexthop + + When a peer receives a martian nexthop as part of the NLRI for a route + permit the nexthop to be used as such, instead of rejecting and resetting + the connection. +``` + + +```{cfgcmd} set protocols bgp parameters router-id \ + +This command specifies the router-ID. If router ID is not specified it will +use the highest interface IP address. +``` + + +```{cfgcmd} set protocols bgp address-family \ maximum-paths \ \ + +This command defines the maximum number of parallel routes that +the BGP can support. In order for BGP to use the second path, the +following attributes have to match: Weight, Local Preference, AS +Path (both AS number and AS path length), Origin code, MED, IGP +metric. Also, the next hop address for each path must be different. +``` + + +```{cfgcmd} set protocols bgp parameters no-hard-administrative-reset + +Do not send Hard Reset CEASE Notification for "Administrative Reset" +events. When set and Graceful Restart Notification capability is exchanged +between the peers, Graceful Restart procedures apply, and routes will be retained. +``` + + +```{cfgcmd} set protocols bgp parameters log-neighbor-changes + +This command enable logging neighbor up/down changes and reset reason. +``` + + +```{cfgcmd} set protocols bgp parameters no-client-to-client-reflection + +This command disables route reflection between route reflector clients. +By default, the clients of a route reflector are not required to be +fully meshed and the routes from a client are reflected to other clients. +However, if the clients are fully meshed, route reflection is not required. +In this case, use the {cfgcmd}`no-client-to-client-reflection` command +to disable client-to-client reflection. +``` + + +```{cfgcmd} set protocols bgp parameters no-fast-external-failover + +Disable immediate session reset if peer's connected link goes down. +``` + + +```{cfgcmd} set protocols bgp parameters no-ipv6-auto-ra + +By default, FRR sends router advertisement packets when Extended Next Hop is +on or when a connection is established directly using the device name (Unnumbered BGP). +Setting this option prevents FRR from sending router advertisement packets, but could break Unnumbered BGP. +``` + + +```{cfgcmd} set protocols bgp listen range \ peer-group \ + +This command is useful if one desires to loosen the requirement for BGP +to have strictly defined neighbors. Specifically what is allowed is for +the local router to listen to a range of IPv4 or IPv6 addresses defined +by a prefix and to accept BGP open messages. When a TCP connection +(and subsequently a BGP open message) from within this range tries to +connect the local router then the local router will respond and connect +with the parameters that are defined within the peer group. One must define +a peer-group for each range that is listed. If no peer-group is defined +then an error will keep you from committing the configuration. +``` + + +```{cfgcmd} set protocols bgp listen limit \ + +This command goes hand in hand with the listen range command to limit the +amount of BGP neighbors that are allowed to connect to the local router. +The limit range is 1 to 5000. +``` + + +```{cfgcmd} set protocols bgp parameters ebgp-requires-policy + +This command changes the eBGP behavior of FRR. By default FRR enables +{rfc}`8212` functionality which affects how eBGP routes are advertised, +namely no routes are advertised across eBGP sessions without some +sort of egress route-map/policy in place. In VyOS however we have this +RFC functionality disabled by default so that we can preserve backwards +compatibility with older versions of VyOS. With this option one can +enable {rfc}`8212` functionality to operate. +``` + + +```{cfgcmd} set protocols bgp parameters labeled-unicast \ + +By default, locally advertised prefixes use the implicit-null label to +encode in the outgoing NLRI. + +The following command uses the explicit-null label value for all the +BGP instances. +``` + +##### Administrative Distance + +```{cfgcmd} set protocols bgp parameters distance global \ \ + +This command change distance value of BGP. The arguments are the distance +values for external routes, internal routes and local routes respectively. +The distance range is 1 to 255. +``` + + +```{cfgcmd} set protocols bgp parameters distance prefix \ distance \ + +This command sets the administrative distance for a particular route. The +distance range is 1 to 255. + +:::{note} +Routes with a distance of 255 are effectively disabled and not +installed into the kernel. +::: +``` + +##### Timers + +```{cfgcmd} set protocols bgp timers holdtime \ + + This command specifies hold-time in seconds. The timer range is + 4 to 65535. The default value is 180 second. If you set value to 0 + VyOS will not hold routes. +``` + + +```{cfgcmd} set protocols bgp timers keepalive \ + +This command specifies keep-alive time in seconds. The timer +can range from 4 to 65535. The default value is 60 second. +``` + +##### Route Dampening + +When a route fails, a routing update is sent to withdraw the route from the +network's routing tables. When the route is re-enabled, the change in +availability is also advertised. A route that continually fails and returns +requires a great deal of network traffic to update the network about the +route's status. + +Route dampening wich described in {rfc}`2439` enables you to identify routes +that repeatedly fail and return. If route dampening is enabled, an unstable +route accumulates penalties each time the route fails and returns. If the +accumulated penalties exceed a threshold, the route is no longer advertised. +This is route suppression. Routes that have been suppressed are re-entered +into the routing table only when the amount of their penalty falls below a +threshold. + +A penalty of 1000 is assessed each time the route fails. When the penalties +reach a predefined threshold (suppress-value), the router stops advertising +the route. + +Once a route is assessed a penalty, the penalty is decreased by half each time +a predefined amount of time elapses (half-life-time). When the accumulated +penalties fall below a predefined threshold (reuse-value), the route is +unsuppressed and added back into the BGP routing table. + +No route is suppressed indefinitely. Maximum-suppress-time defines the maximum +time a route can be suppressed before it is re-advertised. + +```{cfgcmd} set protocols bgp parameters dampening half-life \ + +This command defines the amount of time in minutes after +which a penalty is reduced by half. The timer range is +10 to 45 minutes. +``` + + +```{cfgcmd} set protocols bgp parameters dampening re-use \ + +This command defines the accumulated penalty amount at which the +route is re-advertised. The penalty range is 1 to 20000. +``` + + +```{cfgcmd} set protocols bgp parameters dampening start-suppress-time \ + +This command defines the accumulated penalty amount at which the +route is suppressed. The penalty range is 1 to 20000. +``` + + +```{cfgcmd} set protocols bgp parameters dampening max-suppress-time \ + +This command defines the maximum time in minutes that a route is +suppressed. The timer range is 1 to 255 minutes. +``` + +#### Route Selection Configuration + +```{cfgcmd} set protocols bgp parameters always-compare-med + + This command provides to compare the MED on routes, even when they were + received from different neighbouring ASes. Setting this option makes the + order of preference of routes more defined, and should eliminate MED + induced oscillations. +``` + + +```{cfgcmd} set protocols bgp parameters bestpath as-path confed + +This command specifies that the length of confederation path sets and +sequences should be taken into account during the BGP best path +decision process. +``` + + +```{cfgcmd} set protocols bgp parameters bestpath as-path multipath-relax + +This command specifies that BGP decision process should consider paths +of equal AS_PATH length candidates for multipath computation. Without +the knob, the entire AS_PATH must match for multipath computation. +``` + + +```{cfgcmd} set protocols bgp parameters bestpath as-path ignore + +Ignore AS_PATH length when selecting a route +``` + + +```{cfgcmd} set protocols bgp parameters bestpath compare-routerid + +Ensure that when comparing routes where both are equal on most metrics, +including local-pref, AS_PATH length, IGP cost, MED, that the tie is +broken based on router-ID. + +If this option is enabled, then the already-selected check, where +already selected eBGP routes are preferred, is skipped. + +If a route has an ORIGINATOR_ID attribute because it has been reflected, +that ORIGINATOR_ID will be used. Otherwise, the router-ID of the peer +the route was received from will be used. + +The advantage of this is that the route-selection (at this point) will +be more deterministic. The disadvantage is that a few or even one lowest-ID +router may attract all traffic to otherwise-equal paths because of this +check. It may increase the possibility of MED or IGP oscillation, unless +other measures were taken to avoid these. The exact behaviour will be +sensitive to the iBGP and reflection topology. +``` + + +```{cfgcmd} set protocols bgp parameters bestpath med confed + +This command specifies that BGP considers the MED when comparing routes +originated from different sub-ASs within the confederation to which this +BGP speaker belongs. The default state, where the MED attribute is not +considered. +``` + + +```{cfgcmd} set protocols bgp parameters bestpath med missing-as-worst + +This command specifies that a route with a MED is always considered to be +better than a route without a MED by causing the missing MED attribute to +have a value of infinity. The default state, where the missing MED +attribute is considered to have a value of zero. +``` + + +```{cfgcmd} set protocols bgp parameters default local-pref + +This command specifies the default local preference value. The local +preference range is 0 to 4294967295. +``` + + +```{cfgcmd} set protocols bgp parameters deterministic-med + +This command provides to compare different MED values that advertised by +neighbours in the same AS for routes selection. When this command is +enabled, routes from the same autonomous system are grouped together, and +the best entries of each group are compared. +``` + + +```{cfgcmd} set protocols bgp address-family ipv4-unicast network \ backdoor + +This command allows the router to prefer route to specified prefix learned +via IGP through backdoor link instead of a route to the same prefix learned +via EBGP. +``` + +#### Route Filtering Configuration + +In order to control and modify routing information that is exchanged between +peers you can use route-map, filter-list, prefix-list, distribute-list. + +For inbound updates the order of preference is: + +> - route-map +> - filter-list +> - prefix-list, distribute-list + +For outbound updates the order of preference is: +> - prefix-list, distribute-list +> - filter-list +> - route-map +> +> :::{note} +> The attributes {cfgcmd}`prefix-list` and {cfgcmd}`distribute-list` +> are mutually exclusive, and only one command (distribute-list or +> prefix-list) can be applied to each inbound or outbound direction for a +> particular neighbor. +> ::: + +```{cfgcmd} set protocols bgp neighbor \ address-family \ distribute-list \ \ + +This command applies the access list filters named in \ to the +specified BGP neighbor to restrict the routing information that BGP learns +and/or advertises. The arguments {cfgcmd}`export` and {cfgcmd}`import` +specify the direction in which the access list are applied. +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ prefix-list \ \ + +This command applies the prfefix list filters named in \ to the +specified BGP neighbor to restrict the routing information that BGP learns +and/or advertises. The arguments {cfgcmd}`export` and {cfgcmd}`import` +specify the direction in which the prefix list are applied. +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ route-map \ \ + +This command applies the route map named in \ to the specified BGP +neighbor to control and modify routing information that is exchanged +between peers. The arguments {cfgcmd}`export` and {cfgcmd}`import` +specify the direction in which the route map are applied. +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ filter-list \ \ + +This command applies the AS path access list filters named in \ to the +specified BGP neighbor to restrict the routing information that BGP learns +and/or advertises. The arguments {cfgcmd}`export` and {cfgcmd}`import` +specify the direction in which the AS path access list are applied. +``` + + +```{cfgcmd} set protocols bgp neighbor \ address-family \ capability orf \ + +This command enables the ORF capability (described in {rfc}`5291`) on the +local router, and enables ORF capability advertisement to the specified BGP +peer. The {cfgcmd}`receive` keyword configures a router to advertise ORF +receive capabilities. The {cfgcmd}`send` keyword configures a router to +advertise ORF send capabilities. To advertise a filter from a sender, you +must create an IP prefix list for the specified BGP peer applied in inbound +derection. +``` + + +```{cfgcmd} set protocols bgp neighbor \ solo + +This command prevents from sending back prefixes learned from the neighbor. +``` + +#### BGP Scaling Configuration + + +BGP routers connected inside the same AS through BGP belong to an internal BGP +session, or IBGP. In order to prevent routing table loops, IBGP speaker does +not advertise IBGP-learned routes to other IBGP speaker (Split Horizon +mechanism). As such, IBGP requires a full mesh of all peers. For large +networks, this quickly becomes unscalable. + + +There are two ways that help us to mitigate the BGPs full-mesh requirement in +a network: + + +> - Using BGP route-reflectors +> - Using BGP confederation + + +##### Route Reflector Configuration + + +Introducing route reflectors removes the need for the full-mesh. When you +configure a route reflector you have to tell the router whether the other IBGP +router is a client or non-client. A client is an IBGP router that the route +reflector will “reflect” routes to, the non-client is just a regular IBGP +neighbor. Route reflectors mechanism is described in {rfc}`4456` and updated +by {rfc}`7606`. + +```{cfgcmd} set protocols bgp neighbor \ address-family \ route-reflector-client + +This command specifies the given neighbor as route reflector client. +``` + + +```{cfgcmd} set protocols bgp parameters cluster-id \ + +This command specifies cluster ID which identifies a collection of route +reflectors and their clients, and is used by route reflectors to avoid +looping. By default cluster ID is set to the BGP router id value, but can be +set to an arbitrary 32-bit value. +``` + +##### Confederation Configuration + +A BGP confederation divides our AS into sub-ASes to reduce the number of +required IBGP peerings. Within a sub-AS we still require full-mesh IBGP but +between these sub-ASes we use something that looks like EBGP but behaves like +IBGP (called confederation BGP). Confederation mechanism is described in +{rfc}`5065` + +```{cfgcmd} set protocols bgp parameters confederation identifier \ + +This command specifies a BGP confederation identifier. \ is the number +of the autonomous system that internally includes multiple sub-autonomous +systems (a confederation). +``` + + +```{cfgcmd} set protocols bgp parameters confederation peers \ + +This command sets other confederations \ as members of autonomous +system specified by {cfgcmd}`confederation identifier `. +``` + +## Operational Mode Commands +### Show + +```{opcmd} show bgp \ + + This command displays all entries in BGP routing table. +``` + + +```none +BGP table version is 10, local router ID is 10.0.35.3, vrf id 0 +Default local pref 100, local AS 65000 +Status codes: s suppressed, d damped, h history, * valid, > best, = multipath, + i internal, r RIB-failure, S Stale, R Removed +Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self +Origin codes: i - IGP, e - EGP, ? - incomplete +RPKI validation codes: V valid, I invalid, N Not found + + Network Next Hop Metric LocPrf Weight Path +*> 198.51.100.0/24 10.0.34.4 0 0 65004 i +*> 203.0.113.0/24 10.0.35.5 0 0 65005 i + +Displayed 2 routes and 2 total paths +``` + + +```{opcmd} show bgp \ \ + +This command displays information about the particular entry in the BGP +routing table. +``` + + +```none +BGP routing table entry for 198.51.100.0/24 +Paths: (1 available, best #1, table default) + Advertised to non peer-group peers: + 10.0.13.1 10.0.23.2 10.0.34.4 10.0.35.5 + 65004 + 10.0.34.4 from 10.0.34.4 (10.0.34.4) + Origin IGP, metric 0, valid, external, best (First path received) + Last update: Wed Jan 6 12:18:53 2021 +``` + + +```{opcmd} show bgp cidr-only + +This command displays routes with classless interdomain routing (CIDR). +``` + + +```{opcmd} show bgp \ community \ + +This command displays routes that belong to specified BGP communities. +Valid value is a community number in the range from 1 to 4294967200, +or AA:NN (autonomous system-community number/2-byte number), no-export, +local-as, or no-advertise. +``` + + +```{opcmd} show bgp \ community-list \ + +This command displays routes that are permitted by the BGP +community list. +``` + + +```{opcmd} show bgp \ dampening dampened-paths + +This command displays BGP dampened routes. +``` + + +```{opcmd} show bgp \ dampening flap-statistics + +This command displays information about flapping BGP routes. +``` + + +```{opcmd} show bgp \ filter-list \ + +This command displays BGP routes allowed by the specified AS Path +access list. +``` + + +```{opcmd} show bgp \ neighbors \ advertised-routes + +This command displays BGP routes advertised to a neighbor. +``` + + +```{opcmd} show bgp \ neighbors \ received-routes + +This command displays BGP routes originating from the specified BGP +neighbor before inbound policy is applied. To use this command inbound +soft reconfiguration must be enabled. +``` + + +```{opcmd} show bgp \ neighbors \ routes + +This command displays BGP received-routes that are accepted after filtering. +``` + + +```{opcmd} show bgp \ neighbors \ dampened-routes + +This command displays dampened routes received from BGP neighbor. +``` + + +```{opcmd} show bgp \ regexp \ + +This command displays information about BGP routes whose AS path +matches the specified regular expression. +``` + + +```{opcmd} show bgp \ summary + +This command displays the status of all BGP connections. +``` + + +```none +IPv4 Unicast Summary: +BGP router identifier 10.0.35.3, local AS number 65000 vrf-id 0 +BGP table version 11 +RIB entries 5, using 920 bytes of memory +Peers 4, using 82 KiB of memory + +Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd +10.0.13.1 4 65000 148 159 0 0 0 02:16:01 0 +10.0.23.2 4 65000 136 143 0 0 0 02:13:21 0 +10.0.34.4 4 65004 161 163 0 0 0 02:16:01 1 +10.0.35.5 4 65005 162 166 0 0 0 02:16:01 1 + +Total number of neighbors 4 +``` + +### Reset + +```{opcmd} reset bgp \ \ [soft [in|out]] + +This command resets BGP connections to the specified neighbor IP address. +With argument {cfgcmd}`soft` this command initiates a soft reset. If +you do not specify the {cfgcmd}`in` or {cfgcmd}`out` options, both +inbound and outbound soft reconfiguration are triggered. +``` + + +```{opcmd} reset bgp all + +This command resets all BGP connections of given router. +``` + + +```{opcmd} reset bgp \ external + +This command resets all external BGP peers of given router. +``` + + +```{opcmd} reset bgp \ peer-group \ [soft [in|out]] + +This command resets BGP connections to the specified peer group. +With argument {cfgcmd}`soft` this command initiates a soft reset. If +you do not specify the {cfgcmd}`in` or {cfgcmd}`out` options, both +inbound and outbound soft reconfiguration are triggered. +``` + +## Examples +### IPv4 peering + +A simple eBGP configuration: + +**Node 1:** + +```none +set protocols bgp system-as 65534 +set protocols bgp neighbor 192.168.0.2 ebgp-multihop '2' +set protocols bgp neighbor 192.168.0.2 remote-as '65535' +set protocols bgp neighbor 192.168.0.2 update-source '192.168.0.1' +set protocols bgp neighbor 192.168.0.2 address-family ipv4-unicast +set protocols bgp address-family ipv4-unicast network '172.16.0.0/16' +set protocols bgp parameters router-id '192.168.0.1' +``` + +**Node 2:** + +```none +set protocols bgp system-as 65535 +set protocols bgp neighbor 192.168.0.1 ebgp-multihop '2' +set protocols bgp neighbor 192.168.0.1 remote-as '65534' +set protocols bgp neighbor 192.168.0.1 update-source '192.168.0.2' +set protocols bgp neighbor 192.168.0.1 address-family ipv4-unicast +set protocols bgp address-family ipv4-unicast network '172.17.0.0/16' +set protocols bgp parameters router-id '192.168.0.2' +``` + +Don't forget, the CIDR declared in the network statement MUST **exist in your +routing table (dynamic or static), the best way to make sure that is true is +creating a static route:** + +**Node 1:** + +```none +set protocols static route 172.16.0.0/16 blackhole distance '254' +``` + +**Node 2:** + +```none +set protocols static route 172.17.0.0/16 blackhole distance '254' +``` + +### IPv6 peering + +A simple BGP configuration via IPv6. + +**Node 1:** + +```none +set protocols bgp system-as 65534 +set protocols bgp neighbor 2001:db8::2 ebgp-multihop '2' +set protocols bgp neighbor 2001:db8::2 remote-as '65535' +set protocols bgp neighbor 2001:db8::2 update-source '2001:db8::1' +set protocols bgp neighbor 2001:db8::2 address-family ipv6-unicast +set protocols bgp address-family ipv6-unicast network '2001:db8:1::/48' +set protocols bgp parameters router-id '10.1.1.1' +``` + +**Node 2:** + +```none +set protocols bgp system-as 65535 +set protocols bgp neighbor 2001:db8::1 ebgp-multihop '2' +set protocols bgp neighbor 2001:db8::1 remote-as '65534' +set protocols bgp neighbor 2001:db8::1 update-source '2001:db8::2' +set protocols bgp neighbor 2001:db8::1 address-family ipv6-unicast +set protocols bgp address-family ipv6-unicast network '2001:db8:2::/48' +set protocols bgp parameters router-id '10.1.1.2' +``` + +Don't forget, the CIDR declared in the network statement **MUST exist in your +routing table (dynamic or static), the best way to make sure that is true is +creating a static route:** + +**Node 1:** + +```none +set protocols static route6 2001:db8:1::/48 blackhole distance '254' +``` + +**Node 2:** + +```none +set protocols static route6 2001:db8:2::/48 blackhole distance '254' +``` + +### Route Filtering + +Route filter can be applied using a route-map: + +**Node1:** + +```none +set policy prefix-list AS65535-IN rule 10 action 'permit' +set policy prefix-list AS65535-IN rule 10 prefix '172.16.0.0/16' +set policy prefix-list AS65535-OUT rule 10 action 'deny' +set policy prefix-list AS65535-OUT rule 10 prefix '172.16.0.0/16' +set policy prefix-list6 AS65535-IN rule 10 action 'permit' +set policy prefix-list6 AS65535-IN rule 10 prefix '2001:db8:2::/48' +set policy prefix-list6 AS65535-OUT rule 10 action 'deny' +set policy prefix-list6 AS65535-OUT rule 10 prefix '2001:db8:2::/48' + +set policy route-map AS65535-IN rule 10 action 'permit' +set policy route-map AS65535-IN rule 10 match ip address prefix-list 'AS65535-IN' +set policy route-map AS65535-IN rule 10 match ipv6 address prefix-list 'AS65535-IN' +set policy route-map AS65535-IN rule 20 action 'deny' +set policy route-map AS65535-OUT rule 10 action 'deny' +set policy route-map AS65535-OUT rule 10 match ip address prefix-list 'AS65535-OUT' +set policy route-map AS65535-OUT rule 10 match ipv6 address prefix-list 'AS65535-OUT' +set policy route-map AS65535-OUT rule 20 action 'permit' + +set protocols bgp system-as 65534 +set protocols bgp neighbor 2001:db8::2 address-family ipv4-unicast route-map export 'AS65535-OUT' +set protocols bgp neighbor 2001:db8::2 address-family ipv4-unicast route-map import 'AS65535-IN' +set protocols bgp neighbor 2001:db8::2 address-family ipv6-unicast route-map export 'AS65535-OUT' +set protocols bgp neighbor 2001:db8::2 address-family ipv6-unicast route-map import 'AS65535-IN' +``` + +**Node2:** + +```none +set policy prefix-list AS65534-IN rule 10 action 'permit' +set policy prefix-list AS65534-IN rule 10 prefix '172.17.0.0/16' +set policy prefix-list AS65534-OUT rule 10 action 'deny' +set policy prefix-list AS65534-OUT rule 10 prefix '172.17.0.0/16' +set policy prefix-list6 AS65534-IN rule 10 action 'permit' +set policy prefix-list6 AS65534-IN rule 10 prefix '2001:db8:1::/48' +set policy prefix-list6 AS65534-OUT rule 10 action 'deny' +set policy prefix-list6 AS65534-OUT rule 10 prefix '2001:db8:1::/48' + +set policy route-map AS65534-IN rule 10 action 'permit' +set policy route-map AS65534-IN rule 10 match ip address prefix-list 'AS65534-IN' +set policy route-map AS65534-IN rule 10 match ipv6 address prefix-list 'AS65534-IN' +set policy route-map AS65534-IN rule 20 action 'deny' +set policy route-map AS65534-OUT rule 10 action 'deny' +set policy route-map AS65534-OUT rule 10 match ip address prefix-list 'AS65534-OUT' +set policy route-map AS65534-OUT rule 10 match ipv6 address prefix-list 'AS65534-OUT' +set policy route-map AS65534-OUT rule 20 action 'permit' + +set protocols bgp system-as 65535 +set protocols bgp neighbor 2001:db8::1 address-family ipv4-unicast route-map export 'AS65534-OUT' +set protocols bgp neighbor 2001:db8::1 address-family ipv4-unicast route-map import 'AS65534-IN' +set protocols bgp neighbor 2001:db8::1 address-family ipv6-unicast route-map export 'AS65534-OUT' +set protocols bgp neighbor 2001:db8::1 address-family ipv6-unicast route-map import 'AS65534-IN' +``` + +We could expand on this and also deny link local and multicast in the rule 20 +action deny. diff --git a/docs/configuration/protocols/md-failover.md b/docs/configuration/protocols/md-failover.md new file mode 100644 index 00000000..96374d11 --- /dev/null +++ b/docs/configuration/protocols/md-failover.md @@ -0,0 +1,237 @@ +--- +description: |- + Failover routes are static routes that are installed in the routing + table only while a configured health-check target responds. VyOS uses them + to switch traffic to a backup path when the primary next hop becomes + unreachable, and to restore the primary path automatically once it recovers. +keywords: |- + failover, failover route, static route, health check, icmp probe, + next hop, route metric +--- + +# Failover + +Failover routes are manually configured network paths used only while their +health-check targets are reachable. If the target stops responding, VyOS +removes the route from the routing table and reinstalls it once the target +recovers. + +## Configuration + +Use the following commands to configure failover routes for a specific remote +`` reachable via next-hop `
`. + +```{eval-rst} +.. cfgcmd:: set protocols failover route next-hop
check target + + **Configure the health check target IP address.** + + This is typically a highly available host, either within the destination + subnet or on the public internet. + + Example: + + .. code-block:: none + + set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 check target 8.8.8.8 +``` + +```{eval-rst} +.. cfgcmd:: set protocols failover route next-hop
check timeout + + **Configure the timeout interval, in seconds, between target health checks.** + + The valid range is 1 to 300 seconds. The default is 10 seconds. + + Example: + + .. code-block:: none + + set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 check timeout 2 +``` + +```{eval-rst} +.. cfgcmd:: set protocols failover route next-hop
check type + + **Configure the protocol to use for health checks.** + + The following protocols are available: + + * ``icmp``: VyOS sends two ICMP echo request packets with a 1-second + response timeout. The health check is successful if at least one response + is received. + * ``arp``: VyOS sends two ARP requests with a 1-second response timeout. + The health check is successful if at least one response is received. + * ``tcp``: VyOS verifies whether the destination TCP port is open. The + health check is successful if a TCP connection is successfully + established with the target port. + + The default protocol is ``icmp``. + + .. note:: + + When the check type is set to ``tcp``, you must also define the target + TCP port. + + Example: + + .. code-block:: none + + set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 check type tcp +``` + +```{eval-rst} +.. cfgcmd:: set protocols failover route next-hop
check port + + **Configure the destination TCP port on the health check target.** + + This parameter applies only when the check type is configured as ``tcp``. + + The valid port range is 1 to 65535. + + Example: + + .. code-block:: none + + set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 check port 443 +``` + +```{eval-rst} +.. cfgcmd:: set protocols failover route next-hop
check policy + + **Configure the health check success policy for multiple targets.** + + The following policies are available: + + * ``any-available``: The health check succeeds if at least one of the + configured targets responds successfully. + * ``all-available``: The health check succeeds only if every configured + target responds successfully. + + The default policy is ``any-available``. + + Example: + + .. code-block:: none + + set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 check policy all-available +``` + +```{eval-rst} +.. cfgcmd:: set protocols failover route next-hop
interface + + **Configure the local interface used to reach the next-hop address.** + + This parameter is mandatory. + + Example: + + .. code-block:: none + + set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 interface eth0 +``` + +```{eval-rst} +.. cfgcmd:: set protocols failover route next-hop
metric <1-255> + + **Configure the metric (cost) for the failover route.** + + The metric defines the route priority. A lower metric value indicates a + more preferred route. + + The default value is 1. + + Example: + + .. code-block:: none + + set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 metric 50 +``` + +```{eval-rst} +.. cfgcmd:: set protocols failover route next-hop
onlink + + Configure the next-hop to be reachable via the assigned interface, even + when ``
`` is outside any subnet configured on that interface. + + Example: + + .. code-block:: none + + set protocols failover route 203.0.113.1/32 next-hop 10.217.37.254 onlink +``` + +## Examples + +### Failover route with a single next-hop and ICMP health check + +The following example configures a failover route to `203.0.113.1/32` +through next-hop `192.0.2.1` on `eth0`. The next-hop is monitored with +ICMP probes to `192.0.2.1` every 5 seconds, and the route is installed with +a metric of 10. + +```none +set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 check target '192.0.2.1' +set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 check timeout '5' +set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 check type 'icmp' +set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 interface 'eth0' +set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 metric '10' +``` + +Verify the route: + +```none +vyos@vyos:~$ show ip route 203.0.113.1 +Routing entry for 203.0.113.1/32 + Known via "kernel", distance 0, metric 10, best + Last update 00:00:39 ago + Flags: Selected + Status: Installed + * 192.0.2.1, via eth0, weight 1 +``` + +### Two failover routes with different metrics + +The following example configures two failover routes to `203.0.113.1/32`, +each through a different next-hop. The primary next-hop `192.0.2.1` is +reached on `eth0` with metric 10, and the backup next-hop `198.51.100.1` +is reached on `eth2` with metric 20. Both next-hops are monitored with ICMP +probes every 5 seconds. + +While both health checks succeed, the lower-metric route through `eth0` is +preferred. If the primary target stops responding, its route is removed from +the routing table, and traffic falls over to `198.51.100.1` via `eth2`. + +```none +set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 check target '192.0.2.1' +set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 check timeout '5' +set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 check type 'icmp' +set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 interface 'eth0' +set protocols failover route 203.0.113.1/32 next-hop 192.0.2.1 metric '10' + +set protocols failover route 203.0.113.1/32 next-hop 198.51.100.1 check target '198.51.100.99' +set protocols failover route 203.0.113.1/32 next-hop 198.51.100.1 check timeout '5' +set protocols failover route 203.0.113.1/32 next-hop 198.51.100.1 check type 'icmp' +set protocols failover route 203.0.113.1/32 next-hop 198.51.100.1 interface 'eth2' +set protocols failover route 203.0.113.1/32 next-hop 198.51.100.1 metric '20' +``` + +Verify routes: + +```none +vyos@vyos:~$ show ip route 203.0.113.1 +Routing entry for 203.0.113.1/32 + Known via "kernel", distance 0, metric 10, best + Last update 00:08:06 ago + Flags: Selected + Status: Installed + * 192.0.2.1, via eth0, weight 1 + +Routing entry for 203.0.113.1/32 + Known via "kernel", distance 0, metric 20 + Last update 00:08:14 ago + Flags: None + Status: Installed + * 198.51.100.1, via eth2, weight 1 +``` + diff --git a/docs/configuration/protocols/md-igmp-proxy.md b/docs/configuration/protocols/md-igmp-proxy.md new file mode 100644 index 00000000..961f921b --- /dev/null +++ b/docs/configuration/protocols/md-igmp-proxy.md @@ -0,0 +1,79 @@ +--- +lastproofread: '2023-11-13' +--- + +(igmp-proxy)= + +# IGMP Proxy + +{abbr}`IGMP (Internet Group Management Protocol)` proxy sends IGMP host messages +on behalf of a connected client. The configuration must define one, and only one +upstream interface, and one or more downstream interfaces. + +## Configuration + +```{cfgcmd} set protocols igmp-proxy interface \ role \ + +* **upstream:** The upstream network interface is the outgoing interface +which is responsible for communicating to available multicast data sources. +There can only be one upstream interface. + +* **downstream:** Downstream network interfaces are the distribution +interfaces to the destination networks, where multicast clients can join +groups and receive multicast data. One or more downstream interfaces must +be configured. +``` + +```{cfgcmd} set protocols igmp-proxy interface \ alt-subnet \ + +Defines alternate sources for multicasting and IGMP data. The network address +must be on the following format 'a.b.c.d/n'. By default, the router will +accept data from sources on the same network as configured on an interface. +If the multicast source lies on a remote network, one must define from where +traffic should be accepted. + +This is especially useful for the upstream interface, since the source for +multicast traffic is often from a remote location. + +This option can be supplied multiple times. +``` + +```{cfgcmd} set protocols igmp-proxy disable-quickleave + +Disables quickleave mode. In this mode the daemon will not send a Leave IGMP +message upstream as soon as it receives a Leave message for any downstream +interface. The daemon will not ask for Membership reports on the downstream +interfaces, and if a report is received the group is not joined again the +upstream. + +If it's vital that the daemon should act exactly like a real multicast client +on the upstream interface, this function should be enabled. + +Enabling this function increases the risk of bandwidth saturation. +``` + +```{cfgcmd} set protocols igmp-proxy disable + +Disable this service. +``` + +(igmp-proxy-example)= + +### Example + +Interface eth1 LAN is behind NAT. In order to subscribe 10.0.0.0/23 subnet +multicast which is in eth0 WAN we need to configure igmp-proxy. + +```none +set protocols igmp-proxy interface eth0 role upstream +set protocols igmp-proxy interface eth0 alt-subnet 10.0.0.0/23 +set protocols igmp-proxy interface eth1 role downstream +``` + + +## Operation + +```{opcmd} restart igmp-proxy + +Restart the IGMP proxy process. +``` \ No newline at end of file diff --git a/docs/configuration/protocols/md-index.md b/docs/configuration/protocols/md-index.md new file mode 100644 index 00000000..5f190ce1 --- /dev/null +++ b/docs/configuration/protocols/md-index.md @@ -0,0 +1,25 @@ +# Protocols + +```{toctree} +:includehidden: true +:maxdepth: 1 + +arp +babel +bfd +bgp +failover +igmp-proxy +isis +mpls +multicast +segment-routing +traffic-engineering +openfabric +ospf +pim +pim6 +rip +rpki +static +``` diff --git a/docs/configuration/protocols/md-isis.md b/docs/configuration/protocols/md-isis.md new file mode 100644 index 00000000..ac6db346 --- /dev/null +++ b/docs/configuration/protocols/md-isis.md @@ -0,0 +1,746 @@ +```{include} /_include/need_improvement.txt +``` + +(routing-isis)= + +# IS-IS + +{abbr}`IS-IS (Intermediate System to Intermediate System)` is a link-state +interior gateway protocol (IGP) which is described in ISO10589, +{rfc}`1195`, {rfc}`5308`. IS-IS runs the Dijkstra shortest-path first (SPF) +algorithm to create a database of the network’s topology, and +from that database to determine the best (that is, lowest cost) path to a +destination. The intermediate systems (the name for routers) exchange topology +information with their directly connected neighbors. IS-IS runs directly on +the data link layer (Layer 2). IS-IS addresses are called +{abbr}`NETs (Network Entity Titles)` and can be 8 to 20 bytes long, but are +generally 10 bytes long. The tree database that is created with IS-IS is +similar to the one that is created with OSPF in that the paths chosen should +be similar. Comparisons to OSPF are inevitable and often are reasonable ones +to make in regards to the way a network will respond with either IGP. + +## General + +### Configuration + +#### Mandatory Settings + +For IS-IS top operate correctly, one must do the equivalent of a Router ID in +CLNS. This Router ID is called the {abbr}`NET (Network Entity Title)`. This +must be unique for each and every router that is operating in IS-IS. It also +must not be duplicated otherwise the same issues that occur within OSPF will +occur within IS-IS when it comes to said duplication. + +```{cfgcmd} set protocols isis net \ + +This command sets network entity title (NET) provided in ISO format. + +Here is an example {abbr}`NET (Network Entity Title)` value: + +:::{code-block} none +49.0001.1921.6800.1002.00 +::: +The CLNS address consists of the following parts: + +* {abbr}`AFI (Address family authority identifier)` - ``49`` The AFI value + 49 is what IS-IS uses for private addressing. + +* Area identifier: ``0001`` IS-IS area number (numerical area ``1``) + +* System identifier: ``1921.6800.1002`` - for system identifiers we recommend + to use IP address or MAC address of the router itself. The way to construct + this is to keep all of the zeroes of the router IP address, and then change + the periods from being every three numbers to every four numbers. The + address that is listed here is ``192.168.1.2``, which if expanded will turn + into ``192.168.001.002``. Then all one has to do is move the dots to have + four numbers instead of three. This gives us ``1921.6800.1002``. + +* {abbr}`NET (Network Entity Title)` selector: ``00`` Must always be 00. This + setting indicates "this system" or "local system." + +``` + +```{cfgcmd} set protocols isis interface \ + +This command enables IS-IS on this interface, and allows for +adjacency to occur. Note that the name of IS-IS instance must be +the same as the one used to configure the IS-IS process. +``` + +#### IS-IS Global Configuration + +```{cfgcmd} set protocols isis dynamic-hostname + +This command enables support for dynamic hostname TLV. Dynamic hostname +mapping determined as described in {rfc}`2763`, Dynamic Hostname +Exchange Mechanism for IS-IS. +``` + +```{cfgcmd} set protocols isis level \ + +This command defines the IS-IS router behavior: + +* **level-1** - Act as a station (Level 1) router only. +* **level-1-2** - Act as a station (Level 1) router and area (Level 2) router. +* **level-2-only** - Act as an area (Level 2) router only. +``` + +```{cfgcmd} set protocols isis lsp-mtu \ + +This command configures the maximum size of generated +{abbr}`LSPs (Link State PDUs)`, in bytes. The size range is 128 to 4352. +``` + +```{cfgcmd} set protocols isis metric-style \ + +This command sets old-style (ISO 10589) or new style packet formats: + +* **narrow** - Use old style of TLVs with narrow metric. +* **transition** - Send and accept both styles of TLVs during transition. +* **wide** - Use new style of TLVs to carry wider metric. +``` + +```{cfgcmd} set protocols isis purge-originator + +This command enables {rfc}`6232` purge originator identification. Enable +purge originator identification (POI) by adding the type, length and value +(TLV) with the Intermediate System (IS) identification to the LSPs that do +not contain POI information. If an IS generates a purge, VyOS adds this TLV +with the system ID of the IS to the purge. +``` + +```{cfgcmd} set protocols isis set-attached-bit + +This command sets ATT bit to 1 in Level1 LSPs. It is described in {rfc}`3787`. +``` + +```{cfgcmd} set protocols isis set-overload-bit + +This command sets overload bit to avoid any transit traffic through this +router. It is described in {rfc}`3787`. +``` + +```{cfgcmd} set protocols isis default-information originate \ level-1 + +This command will generate a default-route in L1 database. +``` + +```{cfgcmd} set protocols isis default-information originate \ level-2 + +This command will generate a default-route in L2 database. +``` + +```{cfgcmd} set protocols isis ldp-sync + +This command will enable IGP-LDP synchronization globally for ISIS. This +requires for LDP to be functional. This is described in {rfc}`5443`. By +default all interfaces operational in IS-IS are enabled for synchronization. +Loopbacks are exempt. + +``` + +```{cfgcmd} set protocols isis ldp-sync holddown \ + +This command will change the hold down value globally for IGP-LDP +synchronization during convergence/interface flap events. +``` + +#### Interface Configuration + +```{cfgcmd} set protocols isis interface \ circuit-type \ + +This command specifies circuit type for interface: + +* **level-1** - Level-1 only adjacencies are formed. +* **level-1-2** - Level-1-2 adjacencies are formed +* **level-2-only** - Level-2 only adjacencies are formed + +``` + +```{cfgcmd} set protocols isis interface \ hello-interval \ + +This command sets hello interval in seconds on a given interface. +The range is 1 to 600. +``` + +```{cfgcmd} set protocols isis interface \ hello-multiplier \ + +This command sets multiplier for hello holding time on a given +interface. The range is 2 to 100. +``` + +```{cfgcmd} set protocols isis interface \ hello-padding + +This command configures padding on hello packets to accommodate asymmetrical +maximum transfer units (MTUs) from different hosts as described in +{rfc}`3719`. This helps to prevent a premature adjacency Up state when one +routing devices MTU does not meet the requirements to establish the adjacency. +``` + +```{cfgcmd} set protocols isis interface \ metric \ + +This command set default metric for circuit. + +The metric range is 1 to 16777215 (Max value depend if metric support narrow +or wide value). +``` + +```{cfgcmd} set protocols isis interface \ network point-to-point + +This command specifies network type to Point-to-Point. The default +network type is broadcast. +``` + +```{cfgcmd} set protocols isis interface \ passive + +This command configures the passive mode for this interface. +``` + +```{cfgcmd} set protocols isis interface \ password plaintext-password \ + +This command configures the authentication password for the interface. +``` + +```{cfgcmd} set protocols isis interface \ priority \ + +This command sets priority for the interface for +{abbr}`DIS (Designated Intermediate System)` election. The priority +range is 0 to 127. +``` + +```{cfgcmd} set protocols isis interface \ psnp-interval \ + +This command sets PSNP interval in seconds. The interval range is 0 +to 127. +``` + +```{cfgcmd} set protocols isis interface \ no-three-way-handshake + +This command disables Three-Way Handshake for P2P adjacencies which +described in {rfc}`5303`. Three-Way Handshake is enabled by default. +``` + +```{cfgcmd} set protocols isis interface \ ldp-sync disable + +This command disables IGP-LDP sync for this specific interface. +``` + +```{cfgcmd} set protocols isis interface \ ldp-sync holddown \ + +This command will change the hold down value for IGP-LDP synchronization +during convergence/interface flap events, but for this interface only. +``` + +```{cfgcmd} set protocols isis interface \ fast-reroute lfa [level-1 | level-2] enable + +This command enables per-prefix local LFA fast reroute link protection. +``` + +```{cfgcmd} set protocols isis interface \ fast-reroute lfa [level-1 | level-2] exclude + +This command excludes an interface from the local LFA backup nexthop computation. +``` + +```{cfgcmd} set protocols isis interface \ fast-reroute remote-lfa [level-1 | level-2] tunnel mpls-ldp + +This command enables per-prefix Remote LFA fast reroute link protection. +Note that other routers in the network need to be configured to accept LDP +targeted hello messages in order for RLFA to work. +``` + +```{cfgcmd} set protocols isis interface \ fast-reroute remote-lfa [level-1 | level-2] maximum-metric \ + +This command limits Remote LFA PQ node selection within the specified metric. Metric value range (1-16777215). +``` + +```{cfgcmd} set protocols isis interface \ fast-reroute ti-lfa [level-1|level-2] [node-protection [link-fallback]] + +This command enables per-prefix TI-LFA fast reroute link or node protection. +When node protection is used, option link-fallback enables the computation +and use of link-protecting LFAs for destinations unprotected by node +protection. +``` + +#### Route Redistribution + +```{cfgcmd} set protocols isis redistribute ipv4 \ level-1 + +This command redistributes routing information from the given route source +into the ISIS database as Level-1. There are six modes available for route +source: bgp, connected, kernel, ospf, rip, static. +``` + +```{cfgcmd} set protocols isis redistribute ipv4 \ level-2 + +This command redistributes routing information from the given route source +into the ISIS database as Level-2. There are six modes available for route +source: bgp, connected, kernel, ospf, rip, static. +``` + +```{cfgcmd} set protocols isis redistribute ipv4 \ \ metric \ + +This command specifies metric for redistributed routes from the given route +source. There are six modes available for route source: bgp, connected, +kernel, ospf, rip, static. The metric range is 1 to 16777215. +``` + +```{cfgcmd} set protocols isis redistribute ipv4 \ \ route-map \ + +This command allows to use route map to filter redistributed routes from +the given route source. There are six modes available for route source: +bgp, connected, kernel, ospf, rip, static. +``` + +#### Timers + +```{cfgcmd} set protocols isis lsp-gen-interval \ + +This command sets minimum interval in seconds between regenerating same +LSP. The interval range is 1 to 120. +``` + +```{cfgcmd} set protocols isis lsp-refresh-interval \ + +This command sets LSP refresh interval in seconds. IS-IS generates LSPs +when the state of a link changes. However, to ensure that routing +databases on all routers remain converged, LSPs in stable networks are +generated on a regular basis even though there has been no change to +the state of the links. The interval range is 1 to 65235. The default +value is 900 seconds. +``` + +```{cfgcmd} set protocols isis max-lsp-lifetime \ + +This command sets LSP maximum LSP lifetime in seconds. The interval range +is 350 to 65535. LSPs remain in a database for 1200 seconds by default. +If they are not refreshed by that time, they are deleted. You can change +the LSP refresh interval or the LSP lifetime. The LSP refresh interval +should be less than the LSP lifetime or else LSPs will time out before +they are refreshed. +``` + +```{cfgcmd} set protocols isis spf-interval \ + +This command sets minimum interval between consecutive SPF calculations in +seconds.The interval range is 1 to 120. +``` + +```{cfgcmd} set protocols isis spf-delay-ietf holddown \ +``` + +```{cfgcmd} set protocols isis spf-delay-ietf init-delay \ +``` + +```{cfgcmd} set protocols isis spf-delay-ietf long-delay \ +``` + +```{cfgcmd} set protocols isis spf-delay-ietf short-delay \ +``` + +```{cfgcmd} set protocols isis spf-delay-ietf time-to-learn \ + +This commands specifies the Finite State Machine (FSM) intended to +control the timing of the execution of SPF calculations in response +to IGP events. The process described in {rfc}`8405`. +``` + +#### Loop Free Alternate (LFA) + +```{cfgcmd} set protocols isis fast-reroute lfa remote prefix-list \ \ + +This command enables IP fast re-routing that is part of {rfc}`5286`. +Specifically this is a prefix list which references a prefix in which +will select eligible PQ nodes for remote LFA backups. +``` + +```{cfgcmd} set protocols isis fast-reroute lfa local load-sharing disable \ + +This command disables the load sharing across multiple LFA backups. +``` + +```{cfgcmd} set protocols isis fast-reroute lfa local tiebreaker \ index \ \ + +This command will configure a tie-breaker for multiple local LFA backups. +The lower index numbers will be processed first. +``` + +```{cfgcmd} set protocols isis fast-reroute lfa local priority-limit \ \ + +This command will limit LFA backup computation up to the specified +prefix priority. +``` + +#### Segment Routing over IPv6 (SRv6) + +```{cfgcmd} set protocols isis segment-routing srv6 interface \ + +The dummy interface used +to install SRv6 SIDs into the Linux data plane. The interface must exist and +must be present when configuring IS-IS with +SRv6. +``` + +```{cfgcmd} set protocols isis segment-routing srv6 locator \ + +Specifies the SRv6 locator to use for IS-IS. IS-IS automatically allocates +prefix and adjacency SIDs, creates local SID entries and advertises them +into the IGP domain. +``` + +```{cfgcmd} set protocols isis segment-routing srv6 node-msd max-end-d \<0-255\> + +The Maximum End D MSD Type specifies the maximum number of SIDs present in an +SRH when performing decapsulation. As specified in {rfc}`8986`, the permitted +SID types include, but are not limited to, End.DX6, End.DT4, End.DT46, End +with USD, and End.X with USD. + +If the advertised value is zero or no value is advertised, then the router +cannot apply any behavior that results in decapsulation and forwarding of the +inner packet if the outer IPv6 header contains an SRH. + +Reference: {rfc}`9352` +``` + +```{cfgcmd} set protocols isis segment-routing srv6 node-msd max-end-pop \<0-255\> + +The Maximum End Pop MSD Type signals the maximum number of SIDs in the SRH to +which the router can apply "Penultimate Segment Pop (PSP) of the SRH" or +"Ultimate Segment Pop (USP) of the SRH" behavior, as defined in "Flavors" +(Section 4.16 of {rfc}`8986`). + +If the advertised value is zero or no value is advertised, then the router +cannot apply PSP or USP flavors. + +Reference: {rfc}`9352` +``` + +```{cfgcmd} set protocols isis segment-routing srv6 node-msd max-h-encaps \<0-255\> + +The Maximum H.Encaps MSD Type signals the maximum number of SIDs that can be +added to the segment list of an SRH as part of the "H.Encaps" behavior, as +defined in {rfc}`8986`. + +If the advertised value is zero or no value is advertised, then the headend +can apply an SR Policy that only contains one segment without inserting any +SRH header. A non-zero SRH Max H.encaps MSD indicates that the headend can +insert an SRH up to the advertised number of SIDs. + +Reference: {rfc}`9352` +``` + +```{cfgcmd} set protocols isis segment-routing srv6 node-msd max-segs-left \<0-255\> + +The Maximum Segments Left MSD Type signals the maximum value of the +"Segments Left" field ({rfc}`8754`) in the SRH of a received packet before +applying the Endpoint behavior associated with a SID. + +If no value is advertised, the supported value is 0. + +Reference: {rfc}`9352` +``` + +## Examples + +### Enable IS-IS + +**Node 1:** + +```none +set interfaces loopback lo address '192.168.255.255/32' +set interfaces ethernet eth1 address '192.0.2.1/24' + +set protocols isis interface eth1 +set protocols isis interface lo +set protocols isis net '49.0001.1921.6825.5255.00' +``` + +**Node 2:** + +```none +set interfaces ethernet eth1 address '192.0.2.2/24' + +set interfaces loopback lo address '192.168.255.254/32' +set interfaces ethernet eth1 address '192.0.2.2/24' + +set protocols isis interface eth1 +set protocols isis interface lo +set protocols isis net '49.0001.1921.6825.5254.00' +``` + +This gives us the following neighborships, Level 1 and Level 2: + +```none +Node-1@vyos:~$ show isis neighbor +Area VyOS: + System Id Interface L State Holdtime SNPA + vyos eth1 1 Up 28 0c87.6c09.0001 + vyos eth1 2 Up 28 0c87.6c09.0001 + +Node-2@vyos:~$ show isis neighbor +Area VyOS: + System Id Interface L State Holdtime SNPA + vyos eth1 1 Up 29 0c33.0280.0001 + vyos eth1 2 Up 28 0c33.0280.0001 +``` + +Here's the IP routes that are populated. Just the loopback: + +```none +Node-1@vyos:~$ show ip route isis +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +I 192.0.2.0/24 [115/20] via 192.0.2.2, eth1 inactive, weight 1, 00:02:22 +I>* 192.168.255.254/32 [115/20] via 192.0.2.2, eth1, weight 1, 00:02:22 + +Node-2@vyos:~$ show ip route isis +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +I 192.0.2.0/24 [115/20] via 192.0.2.1, eth1 inactive, weight 1, 00:02:21 +I>* 192.168.255.255/32 [115/20] via 192.0.2.1, eth1, weight 1, 00:02:21 +``` + +### Enable IS-IS and redistribute routes not natively in IS-IS + +**Node 1:** + +```none +set interfaces dummy dum0 address '203.0.113.1/24' +set interfaces ethernet eth1 address '192.0.2.1/24' + +set policy prefix-list EXPORT-ISIS rule 10 action 'permit' +set policy prefix-list EXPORT-ISIS rule 10 prefix '203.0.113.0/24' +set policy route-map EXPORT-ISIS rule 10 action 'permit' +set policy route-map EXPORT-ISIS rule 10 match ip address prefix-list 'EXPORT-ISIS' + +set protocols isis interface eth1 +set protocols isis net '49.0001.1921.6800.1002.00' +set protocols isis redistribute ipv4 connected level-2 route-map 'EXPORT-ISIS' +``` + +**Node 2:** + +```none +set interfaces ethernet eth1 address '192.0.2.2/24' + +set protocols isis interface eth1 +set protocols isis net '49.0001.1921.6800.2002.00' +``` + +Routes on Node 2: + +```none +Node-2@r2:~$ show ip route isis +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, + F - PBR, f - OpenFabric, + > - selected route, * - FIB route, q - queued route, r - rejected route + +I 203.0.113.0/24 [115/10] via 192.0.2.1, eth1, 00:03:42 +``` + +### Enable IS-IS and IGP-LDP synchronization + +**Node 1:** + +```none +set interfaces loopback lo address 192.168.255.255/32 +set interfaces ethernet eth0 address 192.0.2.1/24 + +set protocols isis interface eth0 +set protocols isis interface lo passive +set protocols isis ldp-sync +set protocols isis net 49.0001.1921.6825.5255.00 + +set protocols mpls interface eth0 +set protocols mpls ldp discovery transport-ipv4-address 192.168.255.255 +set protocols mpls ldp interface lo +set protocols mpls ldp interface eth0 +set protocols mpls ldp parameters transport-prefer-ipv4 +set protocols mpls ldp router-id 192.168.255.255 +``` + +This gives us IGP-LDP synchronization for all non-loopback interfaces with +a holddown timer of zero seconds: + +```none +Node-1@vyos:~$ show isis mpls ldp-sync +eth0 + LDP-IGP Synchronization enabled: yes + holddown timer in seconds: 0 + State: Sync achieved +``` + +### Enable IS-IS with Segment Routing (Experimental) + +**Node 1:** + +```none +set interfaces loopback lo address '192.168.255.255/32' +set interfaces ethernet eth1 address '192.0.2.1/24' + +set protocols isis interface eth1 +set protocols isis interface lo +set protocols isis net '49.0001.1921.6825.5255.00' +set protocols isis segment-routing global-block high-label-value '599' +set protocols isis segment-routing global-block low-label-value '550' +set protocols isis segment-routing prefix 192.168.255.255/32 index value '1' +set protocols isis segment-routing prefix 192.168.255.255/32 index explicit-null +set protocols mpls interface 'eth1' +``` + +**Node 2:** + +```none +set interfaces loopback lo address '192.168.255.254/32' +set interfaces ethernet eth1 address '192.0.2.2/24' + +set protocols isis interface eth1 +set protocols isis interface lo +set protocols isis net '49.0001.1921.6825.5254.00' +set protocols isis segment-routing global-block high-label-value '599' +set protocols isis segment-routing global-block low-label-value '550' +set protocols isis segment-routing prefix 192.168.255.254/32 index value '2' +set protocols isis segment-routing prefix 192.168.255.254/32 index explicit-null +set protocols mpls interface 'eth1' +``` + +This gives us MPLS segment routing enabled and labels for far end loopbacks: + +```none +Node-1@vyos:~$ show mpls table + Inbound Label Type Nexthop Outbound Label + ---------------------------------------------------------------------- + 552 SR (IS-IS) 192.0.2.2 IPv4 Explicit Null <-- Node-2 loopback learned on Node-1 + 15000 SR (IS-IS) 192.0.2.2 implicit-null + 15001 SR (IS-IS) fe80::e87:6cff:fe09:1 implicit-null + 15002 SR (IS-IS) 192.0.2.2 implicit-null + 15003 SR (IS-IS) fe80::e87:6cff:fe09:1 implicit-null + +Node-2@vyos:~$ show mpls table + Inbound Label Type Nexthop Outbound Label + --------------------------------------------------------------------- + 551 SR (IS-IS) 192.0.2.1 IPv4 Explicit Null <-- Node-1 loopback learned on Node-2 + 15000 SR (IS-IS) 192.0.2.1 implicit-null + 15001 SR (IS-IS) fe80::e33:2ff:fe80:1 implicit-null + 15002 SR (IS-IS) 192.0.2.1 implicit-null + 15003 SR (IS-IS) fe80::e33:2ff:fe80:1 implicit-null +``` + +Here is the routing tables showing the MPLS segment routing label operations: + +```none +Node-1@vyos:~$ show ip route isis +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +I 192.0.2.0/24 [115/20] via 192.0.2.2, eth1 inactive, weight 1, 00:07:48 +I>* 192.168.255.254/32 [115/20] via 192.0.2.2, eth1, label IPv4 Explicit Null, weight 1, 00:03:39 + +Node-2@vyos:~$ show ip route isis +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +I 192.0.2.0/24 [115/20] via 192.0.2.1, eth1 inactive, weight 1, 00:07:46 +I>* 192.168.255.255/32 [115/20] via 192.0.2.1, eth1, label IPv4 Explicit Null, weight 1, 00:03:43 +``` + +### Enable IS-IS with Segment Routing over IPv6 (Experimental) + +**Node 1:** + +```none +set interfaces dummy dum6 description "SRv6 IS-IS" +set interfaces ethernet eth1 address '192.0.2.1/24' +set interfaces loopback lo address '192.168.255.255/32' + +set protocols segment-routing srv6 locator MAIN prefix 2001:db8:1::/64 +set protocols segment-routing interface eth1 + +set protocols isis interface eth1 +set protocols isis interface lo +set protocols isis net '49.0001.1921.6825.5255.00' +set protocols isis segment-routing srv6 locator MAIN +set protocols isis segment-routing srv6 interface dum6 +``` + +**Node 2:** + +```none +set interfaces dummy dum6 description "SRv6 IS-IS" +set interfaces ethernet eth1 address '192.0.2.2/24' +set interfaces loopback lo address '192.168.255.254/32' + +set protocols segment-routing srv6 locator MAIN prefix 2001:db8:2::/64 +set protocols segment-routing interface eth1 + +set protocols isis interface eth1 +set protocols isis interface lo +set protocols isis net '49.0001.1921.6825.5254.00' +set protocols isis segment-routing srv6 locator MAIN +set protocols isis segment-routing srv6 interface dum6 +``` + +### Enable IS-IS with Segment Routing over IPv6 (uSID) (Experimental) + +**Node 1:** + +```none +set interfaces dummy dum6 description "SRv6 IS-IS" +set interfaces ethernet eth1 address '192.0.2.1/24' +set interfaces loopback lo address '192.168.255.255/32' + +set protocols segment-routing interface eth1 +set protocols segment-routing srv6 locator MAIN prefix 2001:db8:1::/48 +set protocols segment-routing srv6 locator MAIN behavior-usid +set protocols segment-routing srv6 locator MAIN block-len 32 +set protocols segment-routing srv6 locator MAIN format usid-f3216 +set protocols segment-routing srv6 locator MAIN func-bits 16 +set protocols segment-routing srv6 locator MAIN node-len 16 + +set protocols isis interface eth1 +set protocols isis interface lo +set protocols isis net '49.0001.1921.6825.5255.00' +set protocols isis segment-routing srv6 interface dum6 +set protocols isis segment-routing srv6 locator MAIN +``` + +**Node 2:** + +```none +set interfaces dummy dum6 description "SRv6 IS-IS" +set interfaces ethernet eth1 address '192.0.2.2/24' +set interfaces loopback lo address '192.168.255.254/32' + +set protocols segment-routing interface eth1 +set protocols segment-routing srv6 locator MAIN prefix 2001:db8:2::/48 +set protocols segment-routing srv6 locator MAIN behavior-usid +set protocols segment-routing srv6 locator MAIN block-len 32 +set protocols segment-routing srv6 locator MAIN format usid-f3216 +set protocols segment-routing srv6 locator MAIN func-bits 16 +set protocols segment-routing srv6 locator MAIN node-len 16 + +set protocols isis interface eth1 +set protocols isis interface lo +set protocols isis net '49.0001.1921.6825.5254.00' +set protocols isis segment-routing srv6 interface dum6 +set protocols isis segment-routing srv6 locator MAIN +``` diff --git a/docs/configuration/protocols/md-mpls.md b/docs/configuration/protocols/md-mpls.md new file mode 100644 index 00000000..71b14be2 --- /dev/null +++ b/docs/configuration/protocols/md-mpls.md @@ -0,0 +1,285 @@ +(mpls)= + +# MPLS + +{abbr}`MPLS (Multi-Protocol Label Switching)` is a packet forwarding paradigm +which differs from regular IP forwarding. Instead of IP addresses being used to +make the decision on finding the exit interface, a router will instead use an +exact match on a 32 bit/4 byte header called the MPLS label. This label is +inserted between the ethernet (layer 2) header and the IP (layer 3) header. +One can statically or dynamically assign label allocations, but we will focus +on dynamic allocation of labels using some sort of label distribution protocol +(such as the aptly named Label Distribution Protocol / LDP, Resource Reservation +Protocol / RSVP, or Segment Routing through OSPF/ISIS). These protocols allow +for the creation of a unidirectional/unicast path called a labeled switched +path (initialized as LSP) throughout the network that operates very much like +a tunnel through the network. An easy way of thinking about how an MPLS LSP +actually forwards traffic throughout a network is to think of a GRE tunnel. +They are not the same in how they operate, but they are the same in how they +handle the tunneled packet. It would be good to think of MPLS as a tunneling +technology that can be used to transport many different types of packets, to +aid in traffic engineering by allowing one to specify paths throughout the +network (using RSVP or SR), and to generally allow for easier intra/inter +network transport of data packets. + +For more information on how MPLS label switching works, please go visit +[Wikipedia (MPLS)]. + +:::{note} +MPLS support in VyOS is not finished yet, and therefore its +functionality is limited. Currently there is no support for MPLS enabled VPN +services such as L2VPNs and mVPNs. RSVP support is also not present as the +underlying routing stack (FRR) does not implement it. Currently VyOS +implements LDP as described in RFC 5036; other LDP standard are the +following ones: RFC 6720, RFC 6667, RFC 5919, RFC 5561, RFC 7552, RFC 4447. +Because MPLS is already available (FRR also supports RFC 3031). +::: + +## Label Distribution Protocol + +The {abbr}`MPLS (Multi-Protocol Label Switching)` architecture does not assume +a single protocol to create MPLS paths. VyOS supports the Label Distribution +Protocol (LDP) as implemented by FRR, based on {rfc}`5036`. + +{abbr}`LDP (Label Distribution Protocol)` is a TCP based MPLS signaling protocol +that distributes labels creating MPLS label switched paths in a dynamic manner. +LDP is not a routing protocol, as it relies on other routing protocols for +forwarding decisions. LDP cannot bootstrap itself, and therefore relies on said +routing protocols for communication with other routers that use LDP. + +In order to allow for LDP on the local router to exchange label advertisements +with other routers, a TCP session will be established between automatically +discovered and statically assigned routers. LDP will try to establish a TCP +session to the **transport address** of other routers. Therefore for LDP to +function properly please make sure the transport address is shown in the +routing table and reachable to traffic at all times. + +It is highly recommended to use the same address for both the LDP router-id and +the discovery transport address, but for VyOS MPLS LDP to work both parameters +must be explicitly set in the configuration. + +Another thing to keep in mind with LDP is that much like BGP, it is a protocol +that runs on top of TCP. It however does not have an ability to do something +like a refresh capability like BGPs route refresh capability. Therefore one +might have to reset the neighbor for a capability change or a configuration +change to work. + +## Configuration Options + +```{cfgcmd} set protocols mpls interface \ + +Use this command to enable MPLS processing on the interface you define. +``` + + +```{cfgcmd} set protocols mpls ldp interface \ + +Use this command to enable LDP on the interface you define. +``` + + +```{cfgcmd} set protocols mpls ldp router-id \ + +Use this command to configure the IP address used as the LDP router-id of the +local device. +``` + + +```{cfgcmd} set protocols mpls ldp discovery transport-ipv4-address \ + +``` +```{cfgcmd} set protocols mpls ldp discovery transport-ipv6-address \ + +Use this command to set the IPv4 or IPv6 transport-address used by LDP. +``` + +```{cfgcmd} set protocols mpls ldp neighbor \ password \ + +Use this command to configure authentication for LDP peers. Set the +IP address of the LDP peer and a password that should be shared in +order to become neighbors. +``` + +```{cfgcmd} set protocols mpls ldp neighbor \ session-holdtime \ + +Use this command to configure a specific session hold time for LDP peers. +Set the IP address of the LDP peer and a session hold time that should be +configured for it. You may have to reset the neighbor for this to work. +``` + +```{cfgcmd} set protocols mpls ldp neighbor \ ttl-security \ + +Use this command to enable, disable, or specify hop count for TTL security +for LDP peers. By default the value is set to 255 (or max TTL). +``` + +```{eval-rst} +.. cfgcmd:: set protocols mpls ldp discovery hello-ipv4-interval +.. cfgcmd:: set protocols mpls ldp discovery hello-ipv4-holdtime +.. cfgcmd:: set protocols mpls ldp discovery hello-ipv6-interval +.. cfgcmd:: set protocols mpls ldp discovery hello-ipv6-holdtime + + Use these commands if you would like to set the discovery hello and hold time + parameters. +``` + +```{eval-rst} +.. cfgcmd:: set protocols mpls ldp discovery session-ipv4-holdtime +.. cfgcmd:: set protocols mpls ldp discovery session-ipv6-holdtime + + Use this command if you would like to set the TCP session hold time intervals. +``` + +```{eval-rst} +.. cfgcmd:: set protocols mpls ldp import ipv4 import-filter filter-access-list + +.. cfgcmd:: set protocols mpls ldp import ipv6 import-filter filter-access-list6 + + + Use these commands to control the importing of forwarding equivalence classes + (FECs) for LDP from neighbors. This would be useful for example on only + accepting the labeled routes that are needed and not ones that are not + needed, such as accepting loopback interfaces and rejecting all others. +``` + +```{eval-rst} +.. cfgcmd:: set protocols mpls ldp export ipv4 export-filter filter-access-list + +.. cfgcmd:: set protocols mpls ldp export ipv6 export-filter filter-access-list6 + + + Use these commands to control the exporting of forwarding equivalence classes + (FECs) for LDP to neighbors. This would be useful for example on only + announcing the labeled routes that are needed and not ones that are not + needed, such as announcing loopback interfaces and no others. +``` + +```{eval-rst} +.. cfgcmd:: set protocols mpls ldp export ipv4 explicit-null +.. cfgcmd:: set protocols mpls ldp export ipv6 explicit-null + + Use this command if you would like for the router to advertise FECs with a + label of 0 for explicit null operations. +``` + +```{eval-rst} +.. cfgcmd:: set protocols mpls ldp allocation ipv4 access-list +.. cfgcmd:: set protocols mpls ldp allocation ipv6 access-list6 + + Use this command if you would like to control the local FEC allocations for + LDP. A good example would be for your local router to not allocate a label for + everything. Just a label for what it's useful. A good example would be just a + loopback label. +``` + +```{cfgcmd} set protocols mpls ldp parameters cisco-interop-tlv + +Use this command to use a Cisco non-compliant format to send and interpret +the Dual-Stack capability TLV for IPv6 LDP communications. This is related to +{rfc}`7552`. +``` + +```{cfgcmd} set protocols mpls ldp parameters ordered-control + +Use this command to use ordered label distribution control mode. FRR +by default uses independent label distribution control mode for label +distribution. This is related to {rfc}`5036`. +``` + +```{cfgcmd} set protocols mpls ldp parameters transport-prefer-ipv4 + +Use this command to prefer IPv4 for TCP peer transport connection for LDP +when both an IPv4 and IPv6 LDP address are configured on the same interface. +``` + +```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv4 enable +``` + +```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv6 enable + +Use this command to enable targeted LDP sessions to the local router. The +router will then respond to any sessions that are trying to connect to it that +are not a link local type of TCP connection. +``` + +```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv4 address \ +``` + +```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv6 address \ + +Use this command to enable the local router to try and connect with a targeted +LDP session to another router. +``` + +```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv4 hello-holdtime \ +``` + +```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv4 hello-interval \ +``` + +```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv6 hello-holdtime \ +``` + +```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv6 hello-interval \ + +Use these commands if you would like to set the discovery hello and hold time +parameters for the targeted LDP neighbors. +``` + +### Sample configuration to setup LDP on VyOS + +```none +set protocols ospf area 0 network '192.168.255.252/32' <--- Routing for loopback +set protocols ospf area 0 network '192.168.0.5/32' <--- Routing for an interface connecting to the network +set protocols ospf parameters router-id '192.168.255.252' <--- Router ID setting for OSPF +set protocols mpls interface 'eth1' <--- Enable MPLS for an interface connecting to network +set protocols mpls ldp discovery transport-ipv4-address '192.168.255.252' <--- Transport address for LDP for TCP sessions to connect to +set protocols mpls ldp interface 'eth1' <--- Enable LDP for an interface connecting to network +set protocols mpls ldp interface 'lo' <--- Enable LDP on loopback for future services connectivity +set protocols mpls ldp router-id '192.168.255.252' <--- Router ID setting for LDP +set interfaces ethernet eth1 address '192.168.0.5/31' <--- Interface IP for connecting to network +set interfaces loopback lo address '192.168.255.252/32' <--- Interface loopback IP for router ID and other uses +``` + +## Operational Mode Commands + +When LDP is working, you will be able to see label information in the outcome +of `show ip route`. Besides that information, there are also specific *show* +commands for LDP: + +### Show + +```{opcmd} show mpls ldp binding + +Use this command to see the Label Information Base. + +``` + +```{opcmd} show mpls ldp discovery + +Use this command to see discovery hello information +``` + +```{opcmd} show mpls ldp interface + +Use this command to see LDP interface information +``` + +```{opcmd} show mpls ldp neighbor + +Use this command to see LDP neighbor information +``` + +```{opcmd} show mpls ldp neighbor detail + +Use this command to see detailed LDP neighbor information +``` + +### Reset + +```{opcmd} reset mpls ldp neighbor \ + +Use this command to reset an LDP neighbor/TCP session that is established +``` + +[wikipedia (mpls)]: diff --git a/docs/configuration/protocols/md-multicast.md b/docs/configuration/protocols/md-multicast.md new file mode 100644 index 00000000..27150a29 --- /dev/null +++ b/docs/configuration/protocols/md-multicast.md @@ -0,0 +1,31 @@ +(routing-static)= + +# Multicast + +In order to influence Multicast {abbr}`RPF (Reverse Path Forwarding)` lookup, +it is possible to insert into zebra routes for the Multicast +{abbr}`RIB (Routing Information Base)`. These routes are only used for RPF +lookup and will not be used by ZEBRA for insertion into the kernel or for +normal RIB processing. As such it is possible to create weird states with +these commands. + +Use with caution. Most of the time this will not be necessary. + +```{cfgcmd} set protocols static mroute \ next-hop \ [distance \] + +Insert into the Multicast RIB Route `` with specified next-hop. +The distance can be specified as well if desired. +``` +```{cfgcmd} set protocols static mroute \ next-hop \ disable + +Do not install route for `` into the Multicast RIB. +``` +```{cfgcmd} set protocols static mroute \ interface \ [distance \] + +Insert into the Multicast RIB Route `` with specified ``. +The distance can be specified as well if desired. +``` +```{cfgcmd} set protocols static mroute \ interface \ disable + +Do not install route for `` into the Multicast RIB. +``` \ No newline at end of file diff --git a/docs/configuration/protocols/md-openfabric.md b/docs/configuration/protocols/md-openfabric.md new file mode 100644 index 00000000..09ff5900 --- /dev/null +++ b/docs/configuration/protocols/md-openfabric.md @@ -0,0 +1,242 @@ +(openfabric)= + +# OpenFabric + +OpenFabric, specified in [draft-white-openfabric-06.txt](https://datatracker.ietf.org/doc/html/draft-white-openfabric-06), is +a routing protocol derived from IS-IS, providing link-state routing with +efficient flooding for topologies like spine-leaf networks. + +OpenFabric a dual stack protocol. +A single OpenFabric instance is able to perform routing for both IPv4 and IPv6. + +## General + +### Configuration + +#### Mandatory Settings + +For OpenFabric to operate correctly, one must do the equivalent of a Router ID +in Connectionless Network Service (CLNS). This Router ID is called the +{abbr}`NET (Network Entity Title)`. The system identifier must be unique within +the network + +```{cfgcmd} set protocols openfabric net \ + +This command sets network entity title (NET) provided in ISO format. + +Here is an example {abbr}`NET (Network Entity Title)` value: + +:::{code-block} none +49.0001.1921.6800.1002.00 +::: +The CLNS address consists of the following parts: + +* {abbr}`AFI (Address family authority identifier)` - ``49`` The AFI value + 49 is what OpenFabric uses for private addressing. + +* Area identifier: ``0001`` OpenFabric area number (numerical area ``1``) + +* System identifier: ``1921.6800.1002`` - for system identifiers we recommend + to use IP address or MAC address of the router itself. The way to construct + this is to keep all of the zeroes of the router IP address, and then change + the periods from being every three numbers to every four numbers. The + address that is listed here is ``192.168.1.2``, which if expanded will turn + into ``192.168.001.002``. Then all one has to do is move the dots to have + four numbers instead of three. This gives us ``1921.6800.1002``. + +* {abbr}`NET (Network Entity Title)` selector: ``00`` Must always be 00. This + setting indicates "this system" or "local system." +``` + + +```{cfgcmd} set protocols openfabric domain \ interface \ address-family \ + +This command enables OpenFabric instance with \ on this interface, and +allows for adjacency to occur for address family (IPv4 or IPv6 or both). +``` + +#### OpenFabric Global Configuration + +```{cfgcmd} set protocols openfabric domain-password \ \ + +This command configures the authentication password for a routing domain, +as clear text or md5 one. +``` + + +```{cfgcmd} set protocols openfabric domain \ purge-originator + +This command enables {rfc}`6232` purge originator identification. +``` + + +```{cfgcmd} set protocols openfabric domain \ set-overload-bit + +This command sets overload bit to avoid any transit traffic through this +router. +``` + + +```{cfgcmd} set protocols openfabric domain \ log-adjacency-changes + +Log changes in adjacency state. +``` + + +```{cfgcmd} set protocols openfabric domain \ fabric-tier \ + +This command sets a static tier number to advertise as location +in the fabric. +``` + +#### Interface Configuration + +```{cfgcmd} set protocols openfabric interface \ hello-interval \ + +This command sets hello interval in seconds on a given interface. +The range is 1 to 600. Hello packets are used to establish and maintain +adjacency between OpenFabric neighbors. +``` + + +```{cfgcmd} set protocols openfabric domain \ interface \ hello-multiplier \ + +This command sets multiplier for hello holding time on a given +interface. The range is 2 to 100. +``` + + +```{cfgcmd} set protocols openfabric domain \ interface \ metric \ + +This command sets default metric for circuit. +The metric range is 1 to 16777215. +``` + + +```{cfgcmd} set protocols openfabric interface \ passive + +This command enables the passive mode for this interface. +``` + + +```{cfgcmd} set protocols openfabric domain \ interface \ password plaintext-password \ + +This command sets the authentication password for the interface. +``` + + +```{cfgcmd} set protocols openfabric domain \ interface \ csnp-interval \ + +This command sets Complete Sequence Number Packets (CSNP) interval in seconds. +The interval range is 1 to 600. +``` + + +```{cfgcmd} set protocols openfabric domain \ interface \ psnp-interval \ + +This command sets Partial Sequence Number Packets (PSNP) interval in seconds. +The interval range is 1 to 120. +``` + +#### Timers + +```{cfgcmd} set protocols openfabric domain \ lsp-gen-interval \ + +This command sets minimum interval at which link-state packets (LSPs) are +generated. The interval range is 1 to 120. +``` + + +```{cfgcmd} set protocols openfabric domain \ lsp-refresh-interval \ + +This command sets LSP refresh interval in seconds. The interval range +is 1 to 65235. +``` + + +```{cfgcmd} set protocols openfabric domain \ max-lsp-lifetime \ + +This command sets LSP maximum LSP lifetime in seconds. The interval range +is 360 to 65535. LSPs remain in a database for 1200 seconds by default. +If they are not refreshed by that time, they are deleted. You can change +the LSP refresh interval or the LSP lifetime. The LSP refresh interval +should be less than the LSP lifetime or else LSPs will time out before +they are refreshed. +``` + + +```{cfgcmd} set protocols openfabric domain \ spf-interval \ + +This command sets minimum interval between consecutive shortest path first +(SPF) calculations in seconds.The interval range is 1 to 120. +``` + +## Examples +### Enable OpenFabric + +**Node 1:** + +```none +set interfaces loopback lo address '192.168.255.255/32' +set interfaces ethernet eth1 address '192.0.2.1/24' + +set protocols openfabric domain VyOS interface eth1 address-family ipv4 +set protocols openfabric domain VyOS interface lo address-family ipv4 +set protocols openfabric net '49.0001.1921.6825.5255.00' +``` + +**Node 2:** + +```none +set interfaces loopback lo address '192.168.255.254/32' +set interfaces ethernet eth1 address '192.0.2.2/24' + +set protocols openfabric domain VyOS interface eth1 address-family ipv4 +set protocols openfabric domain VyOS interface lo address-family ipv4 +set protocols openfabric net '49.0001.1921.6825.5254.00' +``` + +This gives us the following neighborships: + +```none +Node-1@vyos:~$ show openfabric neighbor +show openfabric neighbor +Area VyOS: + System Id Interface L State Holdtime SNPA + vyos eth1 2 Up 27 2020.2020.2020 + + +Node-2@vyos:~$ show openfabric neighbor +show openfabric neighbor +Area VyOS: + System Id Interface L State Holdtime SNPA + vyos eth1 2 Up 30 2020.2020.2020 +``` + +Here's the IP routes that are populated: + +```none +Node-1@vyos:~$ show ip route openfabric +show ip route openfabric +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +f 192.0.2.0/24 [115/20] via 192.0.2.2, eth1 onlink, weight 1, 00:00:10 +f>* 192.168.255.254/32 [115/20] via 192.0.2.2, eth1 onlink, weight 1, 00:00:10 + +Node-2@vyos:~$ show ip route openfabric +show ip route openfabric +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +f 192.0.2.0/24 [115/20] via 192.0.2.1, eth1 onlink, weight 1, 00:00:48 +f>* 192.168.255.255/32 [115/20] via 192.0.2.1, eth1 onlink, weight 1, 00:00:48 +``` diff --git a/docs/configuration/protocols/md-ospf.md b/docs/configuration/protocols/md-ospf.md new file mode 100644 index 00000000..72fefb84 --- /dev/null +++ b/docs/configuration/protocols/md-ospf.md @@ -0,0 +1,1504 @@ +(routing-ospf)= + +# OSPF + +{abbr}`OSPF (Open Shortest Path First)` is a routing protocol for Internet +Protocol (IP) networks. It uses a link state routing (LSR) algorithm and falls +into the group of interior gateway protocols (IGPs), operating within a single +autonomous system (AS). It is defined as OSPF Version 2 in {rfc}`2328` (1998) +for IPv4. Updates for IPv6 are specified as OSPF Version 3 in {rfc}`5340` +(2008). OSPF supports the {abbr}`CIDR (Classless Inter-Domain Routing)` +addressing model. + +OSPF is a widely used IGP in large enterprise networks. + +## OSPFv2 (IPv4) + +### Configuration + +#### General + +VyOS does not have a special command to start the OSPF process. The OSPF process +starts when the first ospf enabled interface is configured. + +```{cfgcmd} set protocols ospf area \ network \ + + This command specifies the OSPF enabled interface(s). If the interface has + an address from defined range then the command enables OSPF on this + interface so router can provide network information to the other ospf + routers via this interface. + + This command is also used to enable the OSPF process. The area number can be + specified in decimal notation in the range from 0 to 4294967295. Or it + can be specified in dotted decimal notation similar to ip address. + + Prefix length in interface must be equal or bigger (i.e. smaller network) + than prefix length in network statement. For example statement above doesn't + enable ospf on interface with address 192.168.1.1/23, but it does on + interface with address 192.168.1.129/25. + + In some cases it may be more convenient to enable OSPF on a per + interface/subnet + basis {cfgcmd}`set protocols ospf interface area ` +``` + + +```{cfgcmd} set protocols ospf auto-cost reference-bandwidth \ + +This command sets the reference bandwidth for cost calculations, where +bandwidth can be in range from 1 to 4294967, specified in Mbits/s. The +default is 100Mbit/s (i.e. a link of bandwidth 100Mbit/s or higher will +have a cost of 1. Cost of lower bandwidth links will be scaled with +reference to this cost). +``` + + +```{cfgcmd} set protocols ospf parameters router-id \ + +This command sets the router-ID of the OSPF process. The router-ID may be an +IP address of the router, but need not be – it can be any arbitrary 32bit +number. However it MUST be unique within the entire OSPF domain to the OSPF +speaker – bad things will happen if multiple OSPF speakers are configured +with the same router-ID! +``` + +#### Optional + +```{cfgcmd} set protocols ospf default-information originate [always] [metric \] [metric-type \<1|2\>] [route-map \] + +Originate an AS-External (type-5) LSA describing a default route into all +external-routing capable areas, of the specified metric and metric type. +If the {cfgcmd}`always` keyword is given then the default is always +advertised, even when there is no default present in the routing table. +The argument {cfgcmd}`route-map` specifies to advertise the default route +if the route map is satisfied. +``` + + +```{cfgcmd} set protocols ospf distance global \ + +This command change distance value of OSPF globally. +The distance range is 1 to 255. +``` + + +```{cfgcmd} set protocols ospf distance ospf \ \ + +This command change distance value of OSPF. The arguments are the distance +values for external routes, inter-area routes and intra-area routes +respectively. The distance range is 1 to 255. + +:::{note} +Routes with a distance of 255 are effectively disabled and not +installed into the kernel. +::: +``` + + +```{cfgcmd} set protocols ospf log-adjacency-changes [detail] + +This command allows to log changes in adjacency. With the optional +{cfgcmd}`detail` argument, all changes in adjacency status are shown. +Without {cfgcmd}`detail`, only changes to full or regressions are shown. +``` + + +```{cfgcmd} set protocols ospf max-metric router-lsa \|on-startup \> + +This enables {rfc}`3137` support, where the OSPF process describes its +transit links in its router-LSA as having infinite distance so that other +routers will avoid calculating transit paths through the router while +still being able to reach networks through the router. + +This support may be enabled administratively (and indefinitely) with the +{cfgcmd}`administrative` command. It may also be enabled conditionally. +Conditional enabling of max-metric router-lsas can be for a period of +seconds after startup with the {cfgcmd}`on-startup ` command +and/or for a period of seconds prior to shutdown with the +{cfgcmd}`on-shutdown ` command. The time range is 5 to 86400. +``` + + +```{cfgcmd} set protocols ospf parameters abr-type \ + +This command selects ABR model. OSPF router supports four ABR models: + +**cisco** – a router will be considered as ABR if it has several configured +links to the networks in different areas one of which is a backbone area. +Moreover, the link to the backbone area should be active (working). +**ibm** – identical to "cisco" model but in this case a backbone area link +may not be active. +**standard** – router has several active links to different areas. +**shortcut** – identical to "standard" but in this model a router is +allowed to use a connected areas topology without involving a backbone +area for inter-area connections. + +Detailed information about "cisco" and "ibm" models differences can be +found in {rfc}`3509`. A "shortcut" model allows ABR to create routes +between areas based on the topology of the areas connected to this router +but not using a backbone area in case if non-backbone route will be +cheaper. For more information about "shortcut" model, +see ospf-shortcut-abr-02.txt +``` + + +```{cfgcmd} set protocols ospf parameters rfc1583-compatibility + +{rfc}`2328`, the successor to {rfc}`1583`, suggests according to section +G.2 (changes) in section 16.4.1 a change to the path preference algorithm +that prevents possible routing loops that were possible in the old version +of OSPFv2. More specifically it demands that inter-area paths and +intra-area backbone path are now of equal preference but still both +preferred to external paths. + +This command should NOT be set normally. +``` + + +```{cfgcmd} set protocols ospf interface \ passive [disable] + +This command specifies interface as passive. Passive interface advertises +its address, but does not run the OSPF protocol (adjacencies are not formed +and hello packets are not generated). + +The optional disable option allows to exclude interface from passive state. +This command is used if the command {cfgcmd}`passive-interface default` was +configured. +``` + + +```{cfgcmd} set protocols ospf passive-interface default + +This command specifies all interfaces as passive by default. Because this +command changes the configuration logic to a default passive; therefore, +interfaces where router adjacencies are expected need to be configured +with the {cfgcmd}`passive-interface-exclude` command. +``` + + +```{cfgcmd} set protocols ospf maximum-paths \<1-64\> + +Use this command to control the maximum number of equal cost paths to reach +a specific destination. The upper limit may differ if you change the value +of MULTIPATH_NUM during compilation. The default is MULTIPATH_NUM (64). +``` + + +```{cfgcmd} set protocols ospf refresh timers \ + +The router automatically updates link-state information with its neighbors. +Only an obsolete information is updated which age has exceeded a specific +threshold. This parameter changes a threshold value, which by default is +1800 seconds (half an hour). The value is applied to the whole OSPF router. +The timer range is 10 to 1800. +``` + + +```{cfgcmd} set protocols ospf timers throttle spf \ \ + +This command sets the initial delay, the initial-holdtime and the +maximum-holdtime between when SPF is calculated and the event which +triggered the calculation. The times are specified in milliseconds and must +be in the range of 0 to 600000 milliseconds. {cfgcmd}`delay` sets the +initial SPF schedule delay in milliseconds. The default value is 200 ms. +{cfgcmd}`initial-holdtime` sets the minimum hold time between two +consecutive SPF calculations. The default value is 1000 ms. +{cfgcmd}`max-holdtime` sets the maximum wait time between two +consecutive SPF calculations. The default value is 10000 ms. +``` + + +```{cfgcmd} set protocols ospf ldp-sync + +This command will enable IGP-LDP synchronization globally for OSPF. This +requires for LDP to be functional. This is described in {rfc}`5443`. By +default all interfaces operational in OSPF are enabled for synchronization. +Loopbacks are exempt. +``` + + +```{cfgcmd} set protocols ospf ldp-sync holddown \ + +This command will change the hold down value globally for IGP-LDP +synchronization during convergence/interface flap events. +``` + + +```{cfgcmd} set protocols ospf capability opaque + +ospfd supports Opaque LSA {rfc}`2370` as partial support for MPLS Traffic +Engineering LSAs. The opaque-lsa capability must be enabled in the +configuration. + +An alternate command could be "mpls-te on" (Traffic Engineering) + +:::{note} +FRR offers only partial support for some of the routing +protocol extensions that are used with MPLS-TE; it does not +support a complete RSVP-TE solution. +::: +``` + +#### Area Configuration + +```{cfgcmd} set protocols ospf area \ area-type stub + +This command specifies the area to be a Stub Area. That is, an area where +no router originates routes external to OSPF and hence an area where all +external routes are via the ABR(s). Hence, ABRs for such an area do not +need to pass AS-External LSAs (type-5) or ASBR-Summary LSAs (type-4) into +the area. They need only pass Network-Summary (type-3) LSAs into such an +area, along with a default-route summary. +``` + + +```{cfgcmd} set protocols ospf area \ area-type stub no-summary + +This command specifies the area to be a Totally Stub Area. In addition to +stub area limitations this area type prevents an ABR from injecting +Network-Summary (type-3) LSAs into the specified stub area. Only default +summary route is allowed. +``` + + +```{cfgcmd} set protocols ospf area \ area-type stub default-cost \ + +This command sets the cost of default-summary LSAs announced to stubby +areas. The cost range is 0 to 16777215. +``` + + +```{cfgcmd} set protocols ospf area \ area-type nssa + +This command specifies the area to be a Not So Stubby Area. External +routing information is imported into an NSSA in Type-7 LSAs. Type-7 LSAs +are similar to Type-5 AS-external LSAs, except that they can only be +flooded into the NSSA. In order to further propagate the NSSA external +information, the Type-7 LSA must be translated to a Type-5 AS-external-LSA +by the NSSA ABR. +``` + + +```{cfgcmd} set protocols ospf area \ area-type nssa no-summary + +This command specifies the area to be a NSSA Totally Stub Area. ABRs for +such an area do not need to pass Network-Summary (type-3) LSAs (except the +default summary route), ASBR-Summary LSAs (type-4) and AS-External LSAs +(type-5) into the area. But Type-7 LSAs that convert to Type-5 at the NSSA +ABR are allowed. +``` + + +```{cfgcmd} set protocols ospf area \ area-type nssa default-cost \ + +This command sets the default cost of LSAs announced to NSSA areas. +The cost range is 0 to 16777215. +``` + + +```{cfgcmd} set protocols ospf area \ area-type nssa translate \ + +Specifies whether this NSSA border router will unconditionally translate +Type-7 LSAs into Type-5 LSAs. When role is Always, Type-7 LSAs are +translated into Type-5 LSAs regardless of the translator state of other +NSSA border routers. When role is Candidate, this router participates in +the translator election to determine if it will perform the translations +duties. When role is Never, this router will never translate Type-7 LSAs +into Type-5 LSAs. +``` + + +```{cfgcmd} set protocols ospf area \ authentication plaintext-password + +This command specifies that simple password authentication should be used +for the given area. The password must also be configured on a per-interface +basis. +``` + + +```{cfgcmd} set protocols ospf area \ authentication md5 + +This command specify that OSPF packets must be authenticated with MD5 HMACs +within the given area. Keying material must also be configured on a +per-interface basis. +``` + + +```{cfgcmd} set protocols ospf area \ range \ [cost \] + +This command summarizes intra area paths from specified area into one +summary-LSA (Type-3) announced to other areas. This command can be used +only in ABR and ONLY router-LSAs (Type-1) and network-LSAs (Type-2) +(i.e. LSAs with scope area) can be summarized. AS-external-LSAs (Type-5) +can’t be summarized - their scope is AS. The optional argument +{cfgcmd}`cost` specifies the aggregated link metric. The metric range is 0 +to 16777215. +``` + + +```{cfgcmd} set protocols ospf area \ range \ not-advertise + +This command instead of summarizing intra area paths filter them - i.e. +intra area paths from this range are not advertised into other areas. +This command makes sense in ABR only. +``` + + +```{cfgcmd} set protocols ospf area \ export-list \ + +Filter Type-3 summary-LSAs announced to other areas originated from +intra- area paths from specified area. +This command makes sense in ABR only. +``` + + +```{cfgcmd} set protocols ospf area \ import-list \ + +Same as export-list, but it applies to paths announced into specified +area as Type-3 summary-LSAs. +This command makes sense in ABR only. +``` + + +```{cfgcmd} set protocols ospf area \ range \ substitute \ + +One Type-3 summary-LSA with routing info is announced into +backbone area if defined area contains at least one intra-area network +(i.e. described with router-LSA or network-LSA) from range . +This command makes sense in ABR only. +``` + + +```{cfgcmd} set protocols ospf area \ shortcut \ + +This parameter allows to "shortcut" routes (non-backbone) for inter-area +routes. There are three modes available for routes shortcutting: + +**default** – this area will be used for shortcutting only if ABR does not +have a link to the backbone area or this link was lost. +**enable** – the area will be used for shortcutting every time the route +that goes through it is cheaper. +**disable** – this area is never used by ABR for routes shortcutting. +``` + + +```{cfgcmd} set protocols ospf area \ virtual-link \ + +Provides a backbone area coherence by virtual link establishment. + +In general, OSPF protocol requires a backbone area (area 0) to be coherent +and fully connected. I.e. any backbone area router must have a route to any +other backbone area router. Moreover, every ABR must have a link to +backbone area. However, it is not always possible to have a physical link +to a backbone area. In this case between two ABR (one of them has a link to +the backbone area) in the area (not stub area) a virtual link is organized. + +\ – area identifier through which a virtual link goes. +\ – ABR router-id with which a virtual link is established. Virtual +link must be configured on both routers. + +Formally, a virtual link looks like a point-to-point network connecting two +ABR from one area one of which physically connected to a backbone area. +This pseudo-network is considered to belong to a backbone area. +``` + +#### Interface Configuration + +```{cfgcmd} set protocols ospf interface \ area \ + + Enable ospf on an interface and set associated area. + + If you have a lot of interfaces, and/or a lot of subnets, then enabling + OSPF via this command may result in a slight performance improvement. +``` + + +```{cfgcmd} set protocols ospf interface \ authentication plaintext-password \ + +This command sets OSPF authentication key to a simple password. After +setting, all OSPF packets are authenticated. Key has length up to 8 chars. + +Simple text password authentication is insecure and deprecated in favour of +MD5 HMAC authentication. +``` + + +```{cfgcmd} set protocols ospf interface \ authentication md5 key-id \ md5-key \ + +This command specifys that MD5 HMAC authentication must be used on this +interface. It sets OSPF authentication key to a cryptographic password. +Key-id identifies secret key used to create the message digest. This ID +is part of the protocol and must be consistent across routers on a link. +The key can be long up to 16 chars (larger strings will be truncated), +and is associated with the given key-id. +``` + + +```{cfgcmd} set protocols ospf interface \ bandwidth \ + +This command sets the interface bandwidth for cost calculations, where +bandwidth can be in range from 1 to 100000, specified in Mbits/s. +``` + + +```{cfgcmd} set protocols ospf interface \ cost \ + +This command sets link cost for the specified interface. The cost value is +set to router-LSA’s metric field and used for SPF calculation. The cost +range is 1 to 65535. +``` + + +```{cfgcmd} set protocols ospf interface \ dead-interval \ + +Set number of seconds for router Dead Interval timer value used for Wait +Timer and Inactivity Timer. This value must be the same for all routers +attached to a common network. The default value is 40 seconds. The +interval range is 1 to 65535. +``` + + +```{cfgcmd} set protocols ospf interface \ hello-multiplier \ + +The hello-multiplier specifies how many Hellos to send per second, from 1 +(every second) to 10 (every 100ms). Thus one can have 1s convergence time +for OSPF. If this form is specified, then the hello-interval advertised in +Hello packets is set to 0 and the hello-interval on received Hello packets +is not checked, thus the hello-multiplier need NOT be the same across +multiple routers on a common link. +``` + + +```{cfgcmd} set protocols ospf interface \ hello-interval \ + +Set number of seconds for Hello Interval timer value. Setting this value, +Hello packet will be sent every timer value seconds on the specified +interface. This value must be the same for all routers attached to a +common network. The default value is 10 seconds. The interval range is 1 +to 65535. +``` + + +```{cfgcmd} set protocols ospf interface \ bfd + +This command enables {abbr}`BFD (Bidirectional Forwarding Detection)` on +this OSPF link interface. +``` + + +```{cfgcmd} set protocols ospf interface \ mtu-ignore + +This command disables check of the MTU value in the OSPF DBD packets. Thus, +use of this command allows the OSPF adjacency to reach the FULL state even +though there is an interface MTU mismatch between two OSPF routers. +``` + + +```{cfgcmd} set protocols ospf interface \ network \ + +This command allows to specify the distribution type for the network +connected to this interface: + +**broadcast** – broadcast IP addresses distribution. +**non-broadcast** – address distribution in NBMA networks topology. +**point-to-multipoint** – address distribution in point-to-multipoint +networks. +**point-to-point** – address distribution in point-to-point networks. +``` + + +```{cfgcmd} set protocols ospf interface \ priority \ + +This command sets Router Priority integer value. The router with the +highest priority will be more eligible to become Designated Router. +Setting the value to 0, makes the router ineligible to become +Designated Router. The default value is 1. The interval range is 0 to 255. +``` + + +```{cfgcmd} set protocols ospf interface \ retransmit-interval \ + +This command sets number of seconds for RxmtInterval timer value. This +value is used when retransmitting Database Description and Link State +Request packets if acknowledge was not received. The default value is 5 +seconds. The interval range is 3 to 65535. +``` + + +```{cfgcmd} set protocols ospf interface \ transmit-delay \ + +This command sets number of seconds for InfTransDelay value. It allows to +set and adjust for each interface the delay interval before starting the +synchronizing process of the router's database with all neighbors. The +default value is 1 seconds. The interval range is 3 to 65535. +``` + + +```{cfgcmd} set protocols ospf interface \ ldp-sync disable + +This command disables IGP-LDP sync for this specific interface. +``` + + +```{cfgcmd} set protocols ospf interface \ ldp-sync holddown \ + +This command will change the hold down value for IGP-LDP synchronization +during convergence/interface flap events, but for this interface only. +``` + +#### External Route Summarisation + + +This feature summarises originated external LSAs (Type-5 and Type-7). Summary +Route will be originated on-behalf of all matched external LSAs. + +```{cfgcmd} set protocols ospf aggregation timer \ + +Configure aggregation delay timer interval. + +Summarisation starts only after this delay timer expiry. +``` + + +```{cfgcmd} set protocols ospf summary-address x.x.x.x/y [tag (1-4294967295)] + +This command enable/disables summarisation for the configured address range. + +Tag is the optional parameter. If tag configured Summary route will be +originated with the configured tag. +``` + + +```{cfgcmd} set protocols ospf summary-address x.x.x.x/y no-advertise + +This command to ensure not advertise the summary lsa for the matched +external LSAs. +``` + +#### Graceful Restart + +```{cfgcmd} set protocols ospf graceful-restart [grace-period (1-1800)] + +Configure Graceful Restart {rfc}`3623` restarting support. When enabled, +the default grace period is 120 seconds. + +To perform a graceful shutdown, the FRR ``graceful-restart prepare ip +ospf`` EXEC-level command needs to be issued before restarting the +ospfd daemon. +``` + + +```{cfgcmd} set protocols ospf graceful-restart helper enable [router-id A.B.C.D] + +Configure Graceful Restart {rfc}`3623` helper support. By default, helper support +is disabled for all neighbours. This config enables/disables helper support +on this router for all neighbours. + +To enable/disable helper support for a specific neighbour, the router-id +(A.B.C.D) has to be specified. +``` + + +```{cfgcmd} set protocols ospf graceful-restart helper no-strict-lsa-checking + +By default strict-lsa-checking is configured then the helper will abort +the Graceful Restart when a LSA change occurs which affects the restarting +router. + +This command disables it. +``` + + +```{cfgcmd} set protocols ospf graceful-restart helper supported-grace-time + +Supports as HELPER for configured grace period. +``` + + +```{cfgcmd} set protocols ospf graceful-restart helper planned-only + +It helps to support as HELPER only for planned restarts. + +By default, it supports both planned and unplanned outages. +``` + +#### Manual Neighbor Configuration + + +OSPF routing devices normally discover their neighbors dynamically by +listening to the broadcast or multicast hello packets on the network. +Because an NBMA network does not support broadcast (or multicast), the +device cannot discover its neighbors dynamically, so you must configure all +the neighbors statically. + +```{cfgcmd} set protocols ospf neighbor \ + +This command specifies the IP address of the neighboring device. +``` + + +```{cfgcmd} set protocols ospf neighbor \ poll-interval \ + +This command specifies the length of time, in seconds, before the routing +device sends hello packets out of the interface before it establishes +adjacency with a neighbor. The range is 1 to 65535 seconds. The default +value is 60 seconds. +``` + + +```{cfgcmd} set protocols ospf neighbor \ priority \ + +This command specifies the router priority value of the nonbroadcast +neighbor associated with the IP address specified. The default is 0. +This keyword does not apply to point-to-multipoint interfaces. +``` + +#### Redistribution Configuration + +```{cfgcmd} set protocols ospf redistribute \ + + This command redistributes routing information from the given route source + to the OSPF process. There are five modes available for route source: bgp, + connected, kernel, rip, static. +``` + + +```{cfgcmd} set protocols ospf default-metric \ + +This command specifies the default metric value of redistributed routes. +The metric range is 0 to 16777214. +``` + + +```{cfgcmd} set protocols ospf redistribute \ metric \ + +This command specifies metric for redistributed routes from the given +route source. There are five modes available for route source: bgp, +connected, kernel, rip, static. The metric range is 1 to 16777214. +``` + + +```{cfgcmd} set protocols ospf redistribute \ metric-type \<1|2\> + +This command specifies metric type for redistributed routes. Difference +between two metric types that metric type 1 is a metric which is +"commensurable" with inner OSPF links. When calculating a metric to the +external destination, the full path metric is calculated as a metric sum +path of a router which had advertised this link plus the link metric. +Thus, a route with the least summary metric will be selected. If external +link is advertised with metric type 2 the path is selected which lies +through the router which advertised this link with the least metric +despite of the fact that internal path to this router is longer (with more +cost). However, if two routers advertised an external link and with metric +type 2 the preference is given to the path which lies through the router +with a shorter internal path. If two different routers advertised two +links to the same external destimation but with different metric type, +metric type 1 is preferred. If type of a metric left undefined the router +will consider these external links to have a default metric type 2. +``` + + +```{cfgcmd} set protocols ospf redistribute \ route-map \ + +This command allows to use route map to filter redistributed routes from +the given route source. There are five modes available for route source: +bgp, connected, kernel, rip, static. +``` + +#### Operational Mode Commands + +```{opcmd} show ip ospf neighbor + + This command displays the neighbors status. +``` + + +```none +Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL +10.0.13.1 1 Full/DR 38.365s 10.0.13.1 eth0:10.0.13.3 0 0 0 +10.0.23.2 1 Full/Backup 39.175s 10.0.23.2 eth1:10.0.23.3 0 0 0 +``` + + +```{opcmd} show ip ospf neighbor detail + +This command displays the neighbors information in a detailed form, not +just a summary table. +``` + + +```none + Neighbor 10.0.13.1, interface address 10.0.13.1 + + In the area 0.0.0.0 via interface eth0 + + Neighbor priority is 1, State is Full, 5 state changes + + Most recent state change statistics: + + Progressive change 11m55s ago + + DR is 10.0.13.1, BDR is 10.0.13.3 + + Options 2 *|-|-|-|-|-|E|- + + Dead timer due in 34.854s + + Database Summary List 0 + + Link State Request List 0 + + Link State Retransmission List 0 + + Thread Inactivity Timer on + + Thread Database Description Retransmision off + + Thread Link State Request Retransmission on + + Thread Link State Update Retransmission on + + +Neighbor 10.0.23.2, interface address 10.0.23.2 + + In the area 0.0.0.1 via interface eth1 + + Neighbor priority is 1, State is Full, 4 state changes + + Most recent state change statistics: + + Progressive change 41.193s ago + + DR is 10.0.23.3, BDR is 10.0.23.2 + + Options 2 *|-|-|-|-|-|E|- + + Dead timer due in 35.661s + + Database Summary List 0 + + Link State Request List 0 + + Link State Retransmission List 0 + + Thread Inactivity Timer on + + Thread Database Description Retransmision off + + Thread Link State Request Retransmission on + + Thread Link State Update Retransmission on +``` + + +```{opcmd} show ip ospf neighbor \ + +This command displays the neighbors information in a detailed form for a +neighbor whose IP address is specified. +``` + + +```{opcmd} show ip ospf neighbor \ + +This command displays the neighbors status for a neighbor on the specified +interface. +``` + + +```{opcmd} show ip ospf interface [\] + +This command displays state and configuration of OSPF the specified +interface, or all interfaces if no interface is given. +``` + + +```none +eth0 is up + ifindex 2, MTU 1500 bytes, BW 4294967295 Mbit + Internet Address 10.0.13.3/24, Broadcast 10.0.13.255, Area 0.0.0.0 + MTU mismatch detection: enabled + Router ID 10.0.23.3, Network Type BROADCAST, Cost: 1 + Transmit Delay is 1 sec, State Backup, Priority 1 + Backup Designated Router (ID) 10.0.23.3, Interface Address 10.0.13.3 + Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters + Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5 + Hello due in 4.470s + Neighbor Count is 1, Adjacent neighbor count is 1 +eth1 is up + ifindex 3, MTU 1500 bytes, BW 4294967295 Mbit + Internet Address 10.0.23.3/24, Broadcast 10.0.23.255, Area 0.0.0.1 + MTU mismatch detection: enabled + Router ID 10.0.23.3, Network Type BROADCAST, Cost: 1 + Transmit Delay is 1 sec, State DR, Priority 1 + Backup Designated Router (ID) 10.0.23.2, Interface Address 10.0.23.2 + Saved Network-LSA sequence number 0x80000002 + Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters + Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5 + Hello due in 4.563s + Neighbor Count is 1, Adjacent neighbor count is 1 +``` + + +```{opcmd} show ip ospf route [detail] + +This command displays the OSPF routing table, as determined by the most +recent SPF calculation. With the optional {cfgcmd}`detail` argument, +each route item's advertiser router and network attribute will be shown. +``` + + +```none +============ OSPF network routing table ============ +N IA 10.0.12.0/24 [3] area: 0.0.0.0 + via 10.0.13.3, eth0 +N 10.0.13.0/24 [1] area: 0.0.0.0 + directly attached to eth0 +N IA 10.0.23.0/24 [2] area: 0.0.0.0 + via 10.0.13.3, eth0 +N 10.0.34.0/24 [2] area: 0.0.0.0 + via 10.0.13.3, eth0 + +============ OSPF router routing table ============= +R 10.0.23.3 [1] area: 0.0.0.0, ABR + via 10.0.13.3, eth0 +R 10.0.34.4 [2] area: 0.0.0.0, ASBR + via 10.0.13.3, eth0 + +============ OSPF external routing table =========== +N E2 172.16.0.0/24 [2/20] tag: 0 + via 10.0.13.3, eth0 +``` + +The table consists of following data: + + +**OSPF network routing table** – includes a list of acquired routes for all +accessible networks (or aggregated area ranges) of OSPF system. "IA" flag +means that route destination is in the area to which the router is not +connected, i.e. it’s an inter-area path. In square brackets a summary metric +for all links through which a path lies to this network is specified. "via" +prefix defines a router-gateway, i.e. the first router on the way to the +destination (next hop). +**OSPF router routing table** – includes a list of acquired routes to all +accessible ABRs and ASBRs. +**OSPF external routing table** – includes a list of acquired routes that are +external to the OSPF process. "E" flag points to the external link metric type +(E1 – metric type 1, E2 – metric type 2). External link metric is printed in +the "\/\" format. + +```{opcmd} show ip ospf border-routers + +This command displays a table of paths to area boundary and autonomous +system boundary routers. +``` + + +```{opcmd} show ip ospf database + +This command displays a summary table with a database contents (LSA). +``` + + +```none + OSPF Router with ID (10.0.13.1) + + Router Link States (Area 0.0.0.0) + +Link ID ADV Router Age Seq# CkSum Link count +10.0.13.1 10.0.13.1 984 0x80000005 0xd915 1 +10.0.23.3 10.0.23.3 1186 0x80000008 0xfe62 2 +10.0.34.4 10.0.34.4 1063 0x80000004 0x4e3f 1 + + Net Link States (Area 0.0.0.0) + +Link ID ADV Router Age Seq# CkSum +10.0.13.1 10.0.13.1 994 0x80000003 0x30bb +10.0.34.4 10.0.34.4 1188 0x80000001 0x9411 + + Summary Link States (Area 0.0.0.0) + +Link ID ADV Router Age Seq# CkSum Route +10.0.12.0 10.0.23.3 1608 0x80000001 0x6ab6 10.0.12.0/24 +10.0.23.0 10.0.23.3 981 0x80000003 0xe232 10.0.23.0/24 + + AS External Link States + +Link ID ADV Router Age Seq# CkSum Route +172.16.0.0 10.0.34.4 1063 0x80000001 0xc40d E2 172.16.0.0/24 [0x0] +``` + + +```{opcmd} show ip ospf database \ [A.B.C.D] [adv-router \|self-originate] + + This command displays a database contents for a specific link advertisement + type. + + The type can be the following: + asbr-summary, external, network, nssa-external, opaque-area, opaque-as, + opaque-link, router, summary. + + [A.B.C.D] – link-state-id. With this specified the command displays portion + of the network environment that is being described by the advertisement. + The value entered depends on the advertisement’s LS type. It must be + entered in the form of an IP address. + + {cfgcmd}`adv-router ` – router id, which link advertisements need + to be reviewed. + + {cfgcmd}`self-originate` displays only self-originated LSAs from the local + router. +``` + + +```none + OSPF Router with ID (10.0.13.1) + + Router Link States (Area 0.0.0.0) + +LS age: 1213 +Options: 0x2 : *|-|-|-|-|-|E|- +LS Flags: 0x3 +Flags: 0x0 +LS Type: router-LSA +Link State ID: 10.0.13.1 +Advertising Router: 10.0.13.1 +LS Seq Number: 80000009 +Checksum: 0xd119 +Length: 36 + + Number of Links: 1 + + Link connected to: a Transit Network + (Link ID) Designated Router address: 10.0.13.1 + (Link Data) Router Interface address: 10.0.13.1 + Number of TOS metrics: 0 + TOS 0 Metric: 1 +``` + + +```{opcmd} show ip ospf database max-age + +This command displays LSAs in MaxAge list. +``` + +#### Examples +### Enable OSPF + +**Node 1** + +```none +set interfaces loopback lo address 10.1.1.1/32 +set interfaces ethernet eth0 address 192.168.0.1/24 +set protocols ospf area 0 network 192.168.0.0/24 +set protocols ospf area 0 network 10.1.1.1/32 +set protocols ospf parameters router-id 10.1.1.1 +``` + +**Node 2** + +```none +set interfaces loopback lo address 10.1.1.2/32 +set interfaces ethernet eth0 address 192.168.0.2/24 +set protocols ospf area 0 network 192.168.0.0/24 +set protocols ospf area 0 network 10.1.1.2/32 +set protocols ospf parameters router-id 10.1.1.2 +``` + +Here's the neighbors up: + +```none +Node-1@vyos:~$ show ip ospf neighbor + +Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL +10.1.1.2 1 Full/DR 3m43s 36.094s 192.168.0.2 eth0:192.168.0.1 0 0 0 + + +Node-2@vyos:~$ show ip ospf neighbor + +Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL +10.1.1.1 1 Full/Backup 3m47s 31.736s 192.168.0.1 eth0:192.168.0.2 0 0 0 +``` + +Here's the routes: + +```none +Node-1@vyos:~$ show ip route ospf +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +O 10.1.1.1/32 [110/0] is directly connected, lo, weight 1, 00:00:14 +O>* 10.1.1.2/32 [110/1] via 192.168.0.2, eth0, weight 1, 00:00:07 +O 192.168.0.0/24 [110/1] is directly connected, eth0, weight 1, 00:03:32 + +Node-2@vyos:~$ show ip route ospf +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +O>* 10.1.1.1/32 [110/1] via 192.168.0.1, eth0, weight 1, 00:00:11 +O 10.1.1.2/32 [110/0] is directly connected, lo, weight 1, 00:00:04 +O 192.168.0.0/24 [110/1] is directly connected, eth0, weight 1, 00:03:18 +``` + +### Enable OSPF with route redistribution of the loopback and default originate: + +**Node 1** + +```none +set interfaces loopback lo address 10.1.1.1/32 +set protocols ospf area 0 network 192.168.0.0/24 +set protocols ospf default-information originate always +set protocols ospf default-information originate metric 10 +set protocols ospf default-information originate metric-type 2 +set protocols ospf log-adjacency-changes +set protocols ospf parameters router-id 10.1.1.1 +set protocols ospf redistribute connected metric-type 2 +set protocols ospf redistribute connected route-map CONNECT + +set policy route-map CONNECT rule 10 action permit +set policy route-map CONNECT rule 10 match interface lo +``` + +**Node 2** + +```none +set interfaces loopback lo address 10.2.2.2/32 +set protocols ospf area 0 network 192.168.0.0/24 +set protocols ospf log-adjacency-changes +set protocols ospf parameters router-id 10.2.2.2 +set protocols ospf redistribute connected metric-type 2 +set protocols ospf redistribute connected route-map CONNECT + +set policy route-map CONNECT rule 10 action permit +set policy route-map CONNECT rule 10 match interface lo +``` + +### Enable OSPF and IGP-LDP synchronization: + +**Node 1:** + +```none +set interfaces loopback lo address 10.1.1.1/32 +set interfaces ethernet eth0 address 192.168.0.1/24 + +set protocols ospf area 0 network '192.168.0.0/24' +set protocols ospf area 0 network '10.1.1.1/32' +set protocols ospf parameters router-id '10.1.1.1' +set protocols ospf ldp-sync + +set protocols mpls interface eth0 +set protocols mpls ldp discovery transport-ipv4-address 10.1.1.1 +set protocols mpls ldp interface lo +set protocols mpls ldp interface eth0 +set protocols mpls ldp parameters transport-prefer-ipv4 +set protocols mpls ldp router-id 10.1.1.1 +``` + +This gives us IGP-LDP synchronization for all non-loopback interfaces with +a holddown timer of zero seconds: + +```none +Node-1@vyos:~$ show ip ospf mpls ldp-sync + eth0 + LDP-IGP Synchronization enabled: yes + Holddown timer in seconds: 0 + State: Sync achieved +``` + +### Enable OSPF with Segment Routing (Experimental): + +**Node 1** + +```none +set interfaces loopback lo address 10.1.1.1/32 +set interfaces ethernet eth0 address 192.168.0.1/24 + +set protocols ospf area 0 network '192.168.0.0/24' +set protocols ospf area 0 network '10.1.1.1/32' +set protocols ospf parameters opaque-lsa +set protocols ospf parameters router-id '10.1.1.1' +set protocols ospf segment-routing global-block high-label-value '1100' +set protocols ospf segment-routing global-block low-label-value '1000' +set protocols ospf segment-routing prefix 10.1.1.1/32 index explicit-null +set protocols ospf segment-routing prefix 10.1.1.1/32 index value '1' +``` + +**Node 2** + +```none +set interfaces loopback lo address 10.1.1.2/32 +set interfaces ethernet eth0 address 192.168.0.2/24 + +set protocols ospf area 0 network '192.168.0.0/24' +set protocols ospf area 0 network '10.1.1.2/32' +set protocols ospf parameters opaque-lsa +set protocols ospf parameters router-id '10.1.1.2' +set protocols ospf segment-routing global-block high-label-value '1100' +set protocols ospf segment-routing global-block low-label-value '1000' +set protocols ospf segment-routing prefix 10.1.1.2/32 index explicit-null +set protocols ospf segment-routing prefix 10.1.1.2/32 index value '2' +``` + +This gives us MPLS segment routing enabled and labels for far end loopbacks: + +```none +Node-1@vyos:~$ show mpls table + Inbound Label Type Nexthop Outbound Label + ----------------------------------------------------------- + 1002 SR (OSPF) 192.168.0.2 IPv4 Explicit Null <-- Node-2 loopback learned on Node-1 + 15000 SR (OSPF) 192.168.0.2 implicit-null + 15001 SR (OSPF) 192.168.0.2 implicit-null + +Node-2@vyos:~$ show mpls table + Inbound Label Type Nexthop Outbound Label + ----------------------------------------------------------- + 1001 SR (OSPF) 192.168.0.1 IPv4 Explicit Null <-- Node-1 loopback learned on Node-2 + 15000 SR (OSPF) 192.168.0.1 implicit-null + 15001 SR (OSPF) 192.168.0.1 implicit-null +``` + +Here is the routing tables showing the MPLS segment routing label operations: + +```none +Node-1@vyos:~$ show ip route ospf +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +O 10.1.1.1/32 [110/0] is directly connected, lo, weight 1, 00:03:43 +O>* 10.1.1.2/32 [110/1] via 192.168.0.2, eth0, label IPv4 Explicit Null, weight 1, 00:03:32 +O 192.168.0.0/24 [110/1] is directly connected, eth0, weight 1, 00:03:43 + +Node-2@vyos:~$ show ip route ospf +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +O>* 10.1.1.1/32 [110/1] via 192.168.0.1, eth0, label IPv4 Explicit Null, weight 1, 00:03:36 +O 10.1.1.2/32 [110/0] is directly connected, lo, weight 1, 00:03:51 +O 192.168.0.0/24 [110/1] is directly connected, eth0, weight 1, 00:03:51 +``` + +(routing-ospfv3)= + +## OSPFv3 (IPv6) + +(ospf-v3-configuration)= + +### Configuration + +(ospf-v3-general)= + +#### General + +VyOS does not have a special command to start the OSPFv3 process. The OSPFv3 +process starts when the first ospf enabled interface is configured. + +```{cfgcmd} set protocols ospfv3 interface \ area \ + + This command specifies the OSPFv3 enabled interface. This command is also + used to enable the OSPF process. The area number can be specified in + decimal notation in the range from 0 to 4294967295. Or it can be specified + in dotted decimal notation similar to ip address. +``` + + +```{cfgcmd} set protocols ospfv3 parameters router-id \ + +This command sets the router-ID of the OSPFv3 process. The router-ID may be +an IP address of the router, but need not be – it can be any arbitrary +32bit number. However it MUST be unique within the entire OSPFv3 domain to +the OSPFv3 speaker – bad things will happen if multiple OSPFv3 speakers are +configured with the same router-ID! +``` + +(ospf-v3-optional)= + +#### Optional + +```{cfgcmd} set protocols ospfv3 distance global \ + +This command change distance value of OSPFv3 globally. +The distance range is 1 to 255. +``` +```{cfgcmd} set protocols ospfv3 distance ospfv3 \ \ + +This command change distance value of OSPFv3. The arguments are the +distance values for external routes, inter-area routes and intra-area +routes respectively. The distance range is 1 to 255. +``` + +(ospf-v3-area-configuration)= + +#### Area Configuration + +```{cfgcmd} set protocols ospfv3 area \ range \ + +This command summarizes intra area paths from specified area into one +Type-3 Inter-Area Prefix LSA announced to other areas. This command can be +used only in ABR. +``` +```{cfgcmd} set protocols ospfv3 area \ range \ not-advertise + +This command instead of summarizing intra area paths filter them - i.e. +intra area paths from this range are not advertised into other areas. This +command makes sense in ABR only. +``` + +(ospf-v3-interface-config)= + +#### Interface Configuration + +```{cfgcmd} set protocols ospfv3 interface \ ipv6 cost \ + +This command sets link cost for the specified interface. The cost value is +set to router-LSA’s metric field and used for SPF calculation. The cost +range is 1 to 65535. +``` +```{cfgcmd} set protocols ospfv3 interface \ dead-interval \ + +Set number of seconds for router Dead Interval timer value used for Wait +Timer and Inactivity Timer. This value must be the same for all routers +attached to a common network. The default value is 40 seconds. The +interval range is 1 to 65535. +``` +```{cfgcmd} set protocols ospfv3 interface \ hello-interval \ + +Set number of seconds for Hello Interval timer value. Setting this value, +Hello packet will be sent every timer value seconds on the specified +interface. This value must be the same for all routers attached to a +common network. The default value is 10 seconds. The interval range is 1 +to 65535. +``` +```{cfgcmd} set protocols ospfv3 interface \ mtu-ignore + +This command disables check of the MTU value in the OSPF DBD packets. +Thus, use of this command allows the OSPF adjacency to reach the FULL +state even though there is an interface MTU mismatch between two OSPF +routers. +``` +```{cfgcmd} set protocols ospfv3 interface \ network \ + +This command allows to specify the distribution type for the network +connected to this interface: + +**broadcast** – broadcast IP addresses distribution. +**point-to-point** – address distribution in point-to-point networks. +``` +```{cfgcmd} set protocols ospfv3 interface \ priority \ + +This command sets Router Priority integer value. The router with the +highest priority will be more eligible to become Designated Router. +Setting the value to 0, makes the router ineligible to become Designated +Router. The default value is 1. The interval range is 0 to 255. +``` +```{cfgcmd} set protocols ospfv3 interface \ passive + +This command specifies interface as passive. Passive interface advertises +its address, but does not run the OSPF protocol (adjacencies are not formed +and hello packets are not generated). +``` +```{cfgcmd} set protocols ospfv3 interface \ retransmit-interval \ + +This command sets number of seconds for RxmtInterval timer value. This +value is used when retransmitting Database Description and Link State +Request packets if acknowledge was not received. The default value is 5 +seconds. The interval range is 3 to 65535. +``` +```{cfgcmd} set protocols ospfv3 interface \ transmit-delay \ + +This command sets number of seconds for InfTransDelay value. It allows to +set and adjust for each interface the delay interval before starting the +synchronizing process of the router's database with all neighbors. The +default value is 1 seconds. The interval range is 3 to 65535. +``` + +(ospf-v3-graceful-restart)= + +#### Graceful Restart + +```{cfgcmd} set protocols ospfv3 graceful-restart [grace-period (1-1800)] + +Configure Graceful Restart {rfc}`3623` restarting support. When enabled, +the default grace period is 120 seconds. + +To perform a graceful shutdown, the FRR ``graceful-restart prepare ip +ospf`` EXEC-level command needs to be issued before restarting the +ospfd daemon. +``` +```{cfgcmd} set protocols ospfv3 graceful-restart helper enable [router-id A.B.C.D] + +Configure Graceful Restart {rfc}`3623` helper support. By default, helper support +is disabled for all neighbours. This config enables/disables helper support +on this router for all neighbours. + +To enable/disable helper support for a specific neighbour, the router-id +(A.B.C.D) has to be specified. +``` +```{cfgcmd} set protocols ospfv3 graceful-restart helper lsa-check-disable + +By default strict-lsa-checking is configured then the helper will abort +the Graceful Restart when a LSA change occurs which affects the restarting +router. + +This command disables it. +``` +```{cfgcmd} set protocols ospfv3 graceful-restart helper supported-grace-time + +Supports as HELPER for configured grace period. +``` +```{cfgcmd} set protocols ospfv3 graceful-restart helper planned-only + +It helps to support as HELPER only for planned restarts. +By default, it supports both planned and unplanned outages. +``` + +(ospf-v3-redistribution-config)= + +#### Redistribution Configuration + +```{cfgcmd} set protocols ospfv3 redistribute \ + +This command redistributes routing information from the given route source +to the OSPFv3 process. There are five modes available for route source: +bgp, connected, kernel, ripng, static. +``` +```{cfgcmd} set protocols ospf redistribute \ route-map \ + +This command allows to use route map to filter redistributed routes from +given route source. There are five modes available for route source: bgp, +connected, kernel, ripng, static. +``` + +(ospf-v3-op-cmd)= + +#### Operational Mode Commands + +```{opcmd} show ipv6 ospfv3 neighbor + +This command displays the neighbors status. +``` +```{opcmd} show ipv6 ospfv3 neighbor detail + +This command displays the neighbors information in a detailed form, not +just a summary table. +``` +```{opcmd} show ipv6 ospfv3 neighbor drchoice + +This command displays the neighbor DR choice information. +``` +```{opcmd} show ipv6 ospfv3 interface [prefix]|[\ [prefix]] + +This command displays state and configuration of OSPF the specified +interface, or all interfaces if no interface is given. Whith the argument +{cfgcmd}`prefix` this command shows connected prefixes to advertise. +``` +```{opcmd} show ipv6 ospfv3 route + +This command displays the OSPF routing table, as determined by the most +recent SPF calculation. +``` +```{opcmd} show ipv6 ospfv3 border-routers + +This command displays a table of paths to area boundary and autonomous +system boundary routers. +``` +```{opcmd} show ipv6 ospfv3 database + +This command displays a summary table with a database contents (LSA). +``` +```{opcmd} show ipv6 ospfv3 database \ [A.B.C.D] [adv-router \|self-originate] + +This command displays a database contents for a specific link +advertisement type. +``` +```{opcmd} show ipv6 ospfv3 redistribute + +This command displays external information redistributed into OSPFv3 +``` + +(ospf-v3-config-example)= + +#### Configuration Example + +A typical configuration using 2 nodes. + +**Node 1:** + +```none +set protocols ospfv3 interface eth1 area 0.0.0.0 +set protocols ospfv3 area 0.0.0.0 range 2001:db8:1::/64 +set protocols ospfv3 parameters router-id 192.168.1.1 +set protocols ospfv3 redistribute connected +``` + +**Node 2:** + +```none +set protocols ospfv3 interface eth1 area 0.0.0.0 +set protocols ospfv3 area 0.0.0.0 range 2001:db8:2::/64 +set protocols ospfv3 parameters router-id 192.168.2.1 +set protocols ospfv3 redistribute connected +``` + +**To see the redistributed routes:** + +```none +show ipv6 ospfv3 redistribute +``` + +Cost calculation wireguard interfaces is unreliable as ospfv3 uses the link speed to calculate the link cost. +You might therefore want to set the link cost to a fixed value on WireGuard tunnels. + +Example configuration for WireGuard interfaces: + +**Node 1** + +```none +set interfaces wireguard wg01 peer ospf02 allowed-ips '::/0' +set interfaces wireguard wg01 peer ospf02 endpoint '10.1.1.101:12345' +set interfaces wireguard wg01 peer ospf02 pubkey 'ie3...=' +set interfaces wireguard wg01 port '12345' +set protocols ospfv3 parameters router-id 192.168.1.1 +set protocols ospfv3 interface 'wg01' area 0.0.0.0 +set protocols ospfv3 interface 'wg01' cost 10 +set protocols ospfv3 interface 'lo' area 0.0.0.0 +``` + +**Node 2** + +```none +set interfaces wireguard wg01 peer ospf01 allowed-ips '::/0' +set interfaces wireguard wg01 peer ospf01 endpoint '10.1.1.100:12345' +set interfaces wireguard wg01 peer ospf01 pubkey 'NHI...=' +set interfaces wireguard wg01 port '12345' +set protocols ospfv3 parameters router-id 192.168.1.2 +set protocols ospfv3 interface 'wg01' area 0.0.0.0 +set protocols ospfv3 interface 'wg01' cost 10 +set protocols ospfv3 interface 'lo' area 0.0.0.0 +``` + +**Status** + +```none +vyos@ospf01:~$ sh ipv6 ospfv3 neighbor +Neighbor ID Pri DeadTime State/IfState Duration I/F[State] +192.168.0.2 1 00:00:37 Full/PointToPoint 00:18:03 wg01[PointToPoint] + +vyos@ospf02# run sh ipv6 ospfv3 neighbor +Neighbor ID Pri DeadTime State/IfState Duration I/F[State] +192.168.0.1 1 00:00:39 Full/PointToPoint 00:19:44 wg01[PointToPoint] +``` diff --git a/docs/configuration/protocols/md-pim.md b/docs/configuration/protocols/md-pim.md new file mode 100644 index 00000000..db8c9fb7 --- /dev/null +++ b/docs/configuration/protocols/md-pim.md @@ -0,0 +1,282 @@ +--- +lastproofread: '2023-11-13' +--- + +(pim)= + +# PIM – Protocol Independent Multicast + +VyOS supports {abbr}`PIM-SM (PIM Sparse Mode)` as well as +{abbr}`IGMP (Internet Group Management Protocol)` v2 and v3 + +{abbr}`PIM (Protocol Independent Multicast)` must be configured in every +interface of every participating router. Every router must also have the +location of the Rendevouz Point manually configured. Then, unidirectional +shared trees rooted at the Rendevouz Point will automatically be built +for multicast distribution. + +Traffic from multicast sources will go to the Rendezvous Point, and +receivers will pull it from a shared tree using {abbr}`IGMP (Internet +Group Management Protocol)`. + +Multicast receivers will talk IGMP to their local router, so, besides +having PIM configured in every router, IGMP must also be configured in +any router where there could be a multicast receiver locally connected. + +VyOS supports both IGMP version 2 and version 3 (which allows +source-specific multicast). + +## PIM-SM - PIM Sparse Mode + +```{cfgcmd} set protocols pim ecmp + +If PIM has the a choice of ECMP nexthops for a particular +{abbr}`RPF (Reverse Path Forwarding)`, PIM will cause S,G flows to be +spread out amongst the nexthops. If this command is not specified then +the first nexthop found will be used. +``` + +```{cfgcmd} set protocols pim ecmp rebalance + +If PIM is using ECMP and an interface goes down, cause PIM to rebalance all +S,G flows across the remaining nexthops. If this command is not configured +PIM only modifies those S,G flows that were using the interface that went +down. +``` + +```{cfgcmd} set protocols pim join-prune-interval \ + +Modify the join/prune interval that PIM uses to the new value. Time is +specified in seconds. + +The default time is 60 seconds. + +If you enter a value smaller than 60 seconds be aware that this can and +will affect convergence at scale. +``` + +```{cfgcmd} set protocols pim keep-alive-timer \ + +Modify the time out value for a S,G flow from 1-65535 seconds. If choosing +a value below 31 seconds be aware that some hardware platforms cannot see +data flowing in better than 30 second chunks. +``` + +```{cfgcmd} set protocols pim packets \ + +When processing packets from a neighbor process the number of packets +incoming at one time before moving on to the next task. + +The default value is 3 packets. + +This command is only useful at scale when you can possibly have a large +number of PIM control packets flowing. +``` + +```{cfgcmd} set protocols pim register-accept-list \ + +When PIM receives a register packet the source of the packet will be compared +to the prefix-list specified, and if a permit is received normal processing +continues. If a deny is returned for the source address of the register packet +a register stop message is sent to the source. +``` + +```{cfgcmd} set protocols pim register-suppress-time \ + +Modify the time that pim will register suppress a FHR will send register +notifications to the kernel. +``` + +```{cfgcmd} set protocols pim rp \ group \ + +In order to use PIM, it is necessary to configure a {abbr}`RP (Rendezvous Point)` +for join messages to be sent to. Currently the only methodology to do this is +via static rendezvous point commands. + +All routers in the PIM network must agree on these values. + +The first ip address is the RP's address and the second value is the matching +prefix of group ranges covered. +``` + +```{cfgcmd} set protocols pim rp keep-alive-timer \ + +Modify the time out value for a S,G flow from 1-65535 seconds at +{abbr}`RP (Rendezvous Point)`. The normal keepalive period for the KAT(S,G) +defaults to 210 seconds. However, at the {abbr}`RP (Rendezvous Point)`, the +keepalive period must be at least the Register_Suppression_Time, or the RP +may time out the (S,G) state before the next Null-Register arrives. +Thus, the KAT(S,G) is set to max(Keepalive_Period, RP_Keepalive_Period) +when a Register-Stop is sent. + +If choosing a value below 31 seconds be aware that some hardware platforms +cannot see data flowing in better than 30 second chunks. + +See {rfc}`7761#section-4.1` for details. +``` + +```{cfgcmd} set protocols pim no-v6-secondary + +When sending PIM hello packets tell PIM to not send any v6 secondary +addresses on the interface. This information is used to allow PIM to use v6 +nexthops in it's decision for {abbr}`RPF (Reverse Path Forwarding)` lookup +if this option is not set (default). +``` + +```{cfgcmd} set protocols pim spt-switchover infinity-and-beyond [prefix-list \] + +On the last hop router if it is desired to not switch over to the SPT tree +configure this command. + +Optional parameter prefix-list can be use to control which groups to switch or +not switch. If a group is PERMIT as per the prefix-list, then the SPT switchover +does not happen for it and if it is DENY, then the SPT switchover happens. +``` + +```{cfgcmd} set protocols pim ssm prefix-list \ + +Specify a range of group addresses via a prefix-list that forces PIM to never +do {abbr}`SSM (Source-Specific Multicast)` over. +``` + + +### Interface specific commands + +```{cfgcmd} set protocols pim interface \ bfd [profile \] + +Automatically create BFD session for each RIP peer discovered in this +interface. When the BFD session monitor signalize that the link is down +the RIP peer is removed and all the learned routes associated with that +peer are removed. + +If optional profile parameter is used, select a BFD profile for the BFD +sessions created via this interface. +``` + +```{cfgcmd} set protocols pim interface \ dr-priority \ + +Set the {abbr}`DR (Designated Router)` Priority for the interface. +This command is useful to allow the user to influence what node becomes +the DR for a LAN segment. +``` + +```{cfgcmd} set protocols pim interface \ hello \ + +Set the PIM hello and hold interval for a interface. +``` + +```{cfgcmd} set protocols pim interface \ no-bsm + +Tell PIM that we would not like to use this interface to process +bootstrap messages. +``` + +```{cfgcmd} set protocols pim interface \ no-unicast-bsm + +Tell PIM that we would not like to use this interface to process +unicast bootstrap messages. +``` + +```{cfgcmd} set protocols pim interface \ passive + +Disable sending and receiving PIM control packets on the interface. +``` + +```{cfgcmd} set protocols pim interface \ source-address \ + +If you have multiple addresses configured on a particular interface and would +like PIM to use a specific source address associated with that interface. +``` + + +## IGMP - Internet Group Management Protocol) + +```{cfgcmd} set protocols pim igmp watermark-warning \ + +Configure watermark warning generation for an IGMP group limit. Generates +warning once the configured group limit is reached while adding new groups. +``` + +(pim-igmp-interface-commands)= + +### Interface specific commands + +```{cfgcmd} set protocols pim interface \ igmp join \ source-address \ + +Use this command to allow the selected interface to join a multicast +group defining the multicast address you want to join and the source +IP address too. +``` + +```{cfgcmd} set protocols pim interface \ igmp query-interval \ + +Use this command to configure in the selected interface the IGMP +host query interval (1-1800) in seconds that PIM will use. +``` + +```{cfgcmd} set protocols pim interface \ igmp query-max-response-time \ + +Use this command to configure in the selected interface the IGMP +query response timeout value (10-250) in deciseconds. If a report is +not returned in the specified time, it will be assumed the (S,G) or +(\*,G) state {rfc}`7761#section-4.1` has timed out. +``` + +```{cfgcmd} set protocols pim interface \ igmp version \ + +Use this command to define in the selected interface whether you +choose IGMP version 2 or 3. + +The default value is 3. +``` + + +#### Example + +In the following example we can see a basic multicast setup: + +```{image} /_static/images/multicast-basic.webp +:align: center +:alt: Network Topology Diagram +:width: 90% +``` + +**Router 1** + +```none +set interfaces ethernet eth2 address '172.16.0.2/24' +set interfaces ethernet eth1 address '100.64.0.1/24' +set protocols ospf area 0 network '172.16.0.0/24' +set protocols ospf area 0 network '100.64.0.0/24' +set protocols igmp interface eth1 +set protocols pim interface eth1 +set protocols pim interface eth2 +set protocols pim rp address 172.16.255.1 group '224.0.0.0/4' +``` + +**Router 3** + +```none +set interfaces dummy dum0 address '172.16.255.1/24' +set interfaces ethernet eth0 address '172.16.0.1/24' +set interfaces ethernet eth1 address '172.16.1.1/24' +set protocols ospf area 0 network '172.16.0.0/24' +set protocols ospf area 0 network '172.16.255.0/24' +set protocols ospf area 0 network '172.16.1.0/24' +set protocols pim interface dum0 +set protocols pim interface eth0 +set protocols pim interface eth1 +set protocols pim rp address 172.16.255.1 group '224.0.0.0/4' +``` + +**Router 2** + +```none +set interfaces ethernet eth1 address '10.0.0.1/24' +set interfaces ethernet eth2 address '172.16.1.2/24' +set protocols ospf area 0 network '10.0.0.0/24' +set protocols ospf area 0 network '172.16.1.0/24' +set protocols pim interface eth1 +set protocols pim interface eth2 +set protocols pim rp address 172.16.255.1 group '224.0.0.0/4' +``` diff --git a/docs/configuration/protocols/md-pim6.md b/docs/configuration/protocols/md-pim6.md new file mode 100644 index 00000000..707ae606 --- /dev/null +++ b/docs/configuration/protocols/md-pim6.md @@ -0,0 +1,100 @@ +(pim6)= + +# PIM6 - Protocol Independent Multicast for IPv6 + +VyOS facilitates IPv6 Multicast by supporting **PIMv6** and **MLD**. + +PIMv6 (Protocol Independent Multicast for IPv6) must be configured in every +interface of every participating router. Every router must also have the +location of the Rendevouz Point manually configured. +Then, unidirectional shared trees rooted at the Rendevouz Point will +automatically be built for multicast distribution. + +Traffic from multicast sources will go to the Rendezvous Point, and receivers +will pull it from a shared tree using MLD (Multicast Listener Discovery). + +Multicast receivers will talk MLD to their local router, so, besides having +PIMv6 configured in every router, MLD must also be configured in any router +where there could be a multicast receiver locally connected. + +VyOS supports both MLD version 1 and version 2 +(which allows source-specific multicast). + +## Basic commands + +These are the commands for a basic setup. + +```{cfgcmd} set protocols pim6 interface \ + + Use this command to enable PIMv6 in the selected interface so that it + can communicate with PIMv6 neighbors. This command also enables MLD reports + and query on the interface unless {cfgcmd}`mld disable` is configured. +``` + + +```{cfgcmd} set protocols pim6 interface \ mld disable + +Disable MLD reports and query on the interface. +``` + + +## Tuning commands + +You can also tune multicast with the following commands. + +```{cfgcmd} set protocols pim6 interface \ mld interval \ + +Use this command to configure in the selected interface the MLD +host query interval (1-65535) in seconds that PIM will use. +The default value is 125 seconds. +``` + +```{cfgcmd} set protocols pim6 interface \ mld join \ + +Use this command to allow the selected interface to join a multicast group. +``` + +```{cfgcmd} set protocols pim6 interface \ mld join \ source \ + +Use this command to allow the selected interface to join a source-specific multicast +group. +``` + +```{cfgcmd} set protocols pim6 interface \ mld last-member-query-count \ + +Set the MLD last member query count. The default value is 2. +``` + +```{cfgcmd} set protocols pim6 interface \ mld last-member-query-interval \ + +Set the MLD last member query interval in milliseconds (100-6553500). The default value is 1000 milliseconds. +``` + +```{cfgcmd} set protocols pim6 interface \ mld max-response-time \ + +Set the MLD query response timeout in milliseconds (100-6553500). The default value is 10000 milliseconds. +``` + +```{cfgcmd} set protocols pim6 interface \ mld version \ + +Set the MLD version used on this interface. The default value is 2. +``` + + +### Configuration Example + +To enable MLD reports and query on interfaces `eth0` and `eth1`: + +```none +set protocols pim6 interface eth0 +set protocols pim6 interface eth1 +``` + +The following configuration explicitly joins multicast group `ff15::1234` on interface `eth1` +and source-specific multicast group `ff15::5678` with source address `2001:db8::1` on interface +`eth1`: + +```none +set protocols pim6 interface eth0 mld join ff15::1234 +set protocols pim6 interface eth1 mld join ff15::5678 source 2001:db8::1 +``` diff --git a/docs/configuration/protocols/md-rip.md b/docs/configuration/protocols/md-rip.md new file mode 100644 index 00000000..684337d6 --- /dev/null +++ b/docs/configuration/protocols/md-rip.md @@ -0,0 +1,294 @@ +--- +lastproofread: '2021-10-04' +--- + +(rip)= + +# RIP + +{abbr}`RIP (Routing Information Protocol)` is a widely deployed interior gateway +protocol. RIP was developed in the 1970s at Xerox Labs as part of the XNS +routing protocol. RIP is a distance-vector protocol and is based on the +Bellman-Ford algorithms. As a distance-vector protocol, RIP router send updates +to its neighbors periodically, thus allowing the convergence to a known +topology. In each update, the distance to any given network will be broadcast +to its neighboring router. + +Supported versions of RIP are: + +> - RIPv1 as described in {rfc}`1058` +> - RIPv2 as described in {rfc}`2453` + +## General Configuration + +```{cfgcmd} set protocols rip network \ + +This command enables RIP and sets the RIP enable interface by NETWORK. +The interfaces which have addresses matching with NETWORK are enabled. +``` + + +```{cfgcmd} set protocols rip interface \ + +This command specifies a RIP enabled interface by interface name. Both +the sending and receiving of RIP packets will be enabled on the port +specified in this command. +``` + + +```{cfgcmd} set protocols rip neighbor \ + +This command specifies a RIP neighbor. When a neighbor doesn’t understand +multicast, this command is used to specify neighbors. In some cases, not +all routers will be able to understand multicasting, where packets are +sent to a network or a group of addresses. In a situation where a neighbor +cannot process multicast packets, it is necessary to establish a direct +link between routers. +``` + + +```{cfgcmd} set protocols rip passive-interface interface \ + +This command sets the specified interface to passive mode. On passive mode +interface, all receiving packets are processed as normal and VyOS does not +send either multicast or unicast RIP packets except to RIP neighbors +specified with neighbor command. +``` + + +```{cfgcmd} set protocols rip passive-interface interface default + +This command specifies all interfaces to passive mode. +``` + +## Optional Configuration + +```{cfgcmd} set protocols rip default-distance \ + +This command change the distance value of RIP. The distance range is 1 to 255. + +> :::{note} +> Routes with a distance of 255 are effectively disabled and not +> installed into the kernel. +> ::: +``` + + +```{cfgcmd} set protocols rip network-distance \ distance \ + +This command sets default RIP distance to a specified value when the routes +source IP address matches the specified prefix. +``` + + +```{cfgcmd} set protocols rip network-distance \ access-list \ + +This command can be used with previous command to sets default RIP distance +to specified value when the route source IP address matches the specified +prefix and the specified access-list. +``` + + +```{cfgcmd} set protocols rip default-information originate + +This command generate a default route into the RIP. +``` + + +```{cfgcmd} set protocols rip distribute-list access-list \ \ + +This command can be used to filter the RIP path using access lists. +{cfgcmd}`in` and {cfgcmd}`out` this is the direction in which the access +lists are applied. +``` + + +```{cfgcmd} set protocols rip distribute-list interface \ access-list \ \ + +This command allows you apply access lists to a chosen interface to +filter the RIP path. +``` + + +```{cfgcmd} set protocols rip distribute-list prefix-list \ \ + +This command can be used to filter the RIP path using prefix lists. +{cfgcmd}`in` and {cfgcmd}`out` this is the direction in which the prefix +lists are applied. +``` + + +```{cfgcmd} set protocols rip distribute-list interface \ prefix-list \ \ + +This command allows you apply prefix lists to a chosen interface to +filter the RIP path. +``` + + +```{cfgcmd} set protocols rip route \ + +This command is specific to FRR and VyOS. The route command makes a static +route only inside RIP. This command should be used only by advanced users +who are particularly knowledgeable about the RIP protocol. In most cases, +we recommend creating a static route in VyOS and redistributing it in RIP +using {cfgcmd}`redistribute static`. +``` + + +```{cfgcmd} set protocols rip timers update \ + +This command specifies the update timer. Every update timer seconds, the +RIP process is awakened to send an unsolicited response message containing +the complete routing table to all neighboring RIP routers. The time range +is 5 to 2147483647. The default value is 30 seconds. +``` + + +```{cfgcmd} set protocols rip timers timeout \ + +This command specifies the timeout timer. Upon expiration of the timeout, +the route is no longer valid; however, it is retained in the routing table +for a short time so that neighbors can be notified that the route has been +dropped. The time range is 5 to 2147483647. The default value is 180 +seconds. +``` + + +```{cfgcmd} set protocols rip timers garbage-collection \ + +This command specifies the garbage-collection timer. Upon expiration of +the garbage-collection timer, the route is finally removed from the +routing table. The time range is 5 to 2147483647. The default value is 120 +seconds. +``` + +## Redistribution Configuration + +```{cfgcmd} set protocols rip redistribute \ + +This command redistributes routing information from the given route source +into the RIP tables. There are five modes available for route source: bgp, +connected, kernel, ospf, static. +``` + + +```{cfgcmd} set protocols rip redistribute \ metric \ + +This command specifies metric for redistributed routes from the given route +source. There are five modes available for route source: bgp, connected, +kernel, ospf, static. The metric range is 1 to 16. +``` + + +```{cfgcmd} set protocols rip redistribute \ route-map \ + +This command allows to use route map to filter redistributed routes from +the given route source. There are five modes available for route source: +bgp, connected, kernel, ospf, static. +``` + + +```{cfgcmd} set protocols rip default-metric \ + +This command modifies the default metric (hop count) value for redistributed +routes. The metric range is 1 to 16. The default value is 1. This command +does not affect connected route even if it is redistributed by +{cfgcmd}`redistribute connected`. To modify connected routes metric +value, please use {cfgcmd}`redistribute connected metric`. +``` + +## Interfaces Configuration + +```{cfgcmd} set interfaces \ \ ip rip authentication plaintext-password \ + +This command sets the interface with RIP simple password authentication. +This command also sets authentication string. The string must be shorter +than 16 characters. +``` + + +```{cfgcmd} set interfaces \ \ ip rip authentication md5 \ password \ + +This command sets the interface with RIP MD5 authentication. This command +also sets MD5 Key. The key must be shorter than 16 characters. +``` + + +```{cfgcmd} set interfaces \ \ ip rip split-horizon disable + +This command disables split-horizon on the interface. By default, VyOS does +not advertise RIP routes out the interface over which they were learned +(split horizon).3 +``` + + +```{cfgcmd} set interfaces \ \ ip rip split-horizon poison-reverse + +This command enables poison-reverse on the interface. If both poison reverse +and split horizon are enabled, then VyOS advertises the learned routes +as unreachable over the interface on which the route was learned. +``` + +## Operational Mode Commands + +```{opcmd} show ip rip + +This command displays RIP routes. +``` +```none +Codes: R - RIP, C - connected, S - Static, O - OSPF, B - BGP +Sub-codes: + (n) - normal, (s) - static, (d) - default, (r) - redistribute, + (i) - interface + + Network Next Hop Metric From Tag Time +C(i) 10.0.12.0/24 0.0.0.0 1 self 0 +C(i) 10.0.13.0/24 0.0.0.0 1 self 0 +R(n) 10.0.23.0/24 10.0.12.2 2 10.0.12.2 0 02:53 +``` + +```{opcmd} show ip rip status + +The command displays current RIP status. It includes RIP timer, filtering, +version, RIP enabled interface and RIP peer information. +``` +```none +Routing Protocol is "rip" + Sending updates every 30 seconds with +/-50%, next due in 11 seconds + Timeout after 180 seconds, garbage collect after 120 seconds + Outgoing update filter list for all interface is not set + Incoming update filter list for all interface is not set + Default redistribution metric is 1 + Redistributing: + Default version control: send version 2, receive any version + Interface Send Recv Key-chain + eth0 2 1 2 + eth2 2 1 2 + Routing for Networks: + 10.0.12.0/24 + eth0 + Routing Information Sources: + Gateway BadPackets BadRoutes Distance Last Update + 10.0.12.2 0 0 120 00:00:11 + Distance: (default is 120) +``` + +## Configuration Example + +Simple RIP configuration using 2 nodes and redistributing connected interfaces. + +**Node 1:** + +```none +set interfaces loopback address 10.1.1.1/32 +set protocols rip network 192.168.0.0/24 +set protocols rip redistribute connected +``` + +**Node 2:** + +```none +set interfaces loopback address 10.2.2.2/32 +set protocols rip network 192.168.0.0/24 +set protocols rip redistribute connected +``` diff --git a/docs/configuration/protocols/md-rpki.md b/docs/configuration/protocols/md-rpki.md new file mode 100644 index 00000000..1f4cf5bf --- /dev/null +++ b/docs/configuration/protocols/md-rpki.md @@ -0,0 +1,210 @@ +(rpki)= + +# RPKI + +:::{pull-quote} + +There are two types of Network Admins who deal with BGP, those who have +created an international incident and/or outage, and those who are lying + +-- [tweet by EvilMog](https://twitter.com/Evil_Mog/status/1230924170508169216), 2020-02-21 +::: + +{abbr}`RPKI (Resource Public Key Infrastructure)` is a framework designed to +secure the Internet routing infrastructure. It associates BGP route +announcements with the correct originating {abbr}`ASN (Autonomus System +Number)` which BGP routers can then use to check each route against the +corresponding {abbr}`ROA (Route Origin Authorisation)` for validity. RPKI is +described in {rfc}`6480`. + +A BGP-speaking router like VyOS can retrieve ROA information from RPKI +"Relying Party software" (often just called an "RPKI server" or "RPKI +validator") by using {abbr}`RTR (RPKI to Router)` protocol. There are several +open source implementations to choose from, such as NLNetLabs' [Routinator] +(written in Rust), OpenBSD's [rpki-client] (written in C), and [StayRTR] (written +in Go). The RTR protocol is described in {rfc}`8210`. + +:::{tip} +If you are new to these routing security technologies then there is an +[excellent guide to RPKI] by NLnet Labs which will get you up to speed +very quickly. Their documentation explains everything from what RPKI is to +deploying it in production. It also has some +[help and operational guidance] including "What can I do about my route +having an Invalid state?" +::: + +## Getting started + +First you will need to deploy an RPKI validator for your routers to use. NLnet +Labs provides a collection of [software] you can compare and settle on one. +Once your server is running you can start validating announcements. + +Imported prefixes during the validation may have values: + +> valid +> +> : The prefix and ASN that originated it match a signed ROA. These are +> probably trustworthy route announcements. +> +> invalid +> +> : The prefix or prefix length and ASN that originated it doesn't +> match any existing ROA. This could be the result of a prefix hijack, or +> merely a misconfiguration, but should probably be treated as +> untrustworthy route announcements. +> +> notfound +> +> : No ROA exists which covers that prefix. Unfortunately this is the case for +> about 40%-50% of the prefixes which were announced to the {abbr}`DFZ +> (default-free zone)` at the start of 2024. + +:::{note} +If you are responsible for the global addresses assigned to your +network, please make sure that your prefixes have ROAs associated with them +to avoid being `notfound` by RPKI. For most ASNs this will involve +publishing ROAs via your {abbr}`RIR (Regional Internet Registry)` (RIPE +NCC, APNIC, ARIN, LACNIC, or AFRINIC), and is something you are encouraged +to do whenever you plan to announce addresses into the DFZ. + +Particularly large networks may wish to run their own RPKI certificate +authority and publication server instead of publishing ROAs via their RIR. +This is a subject far beyond the scope of VyOS' documentation. Consider +reading about [Krill] if this is a rabbit hole you need or especially want +to dive down. +::: + +### Features of the Current Implementation + +In a nutshell, the current implementation provides the following features: + +- The BGP router can connect to one or more RPKI cache servers to receive + validated prefix to origin AS mappings. Advanced failover can be implemented + by server sockets with different preference values. +- If no connection to an RPKI cache server can be established after a + pre-defined timeout, the router will process routes without prefix origin + validation. It still will try to establish a connection to an RPKI cache + server in the background. +- By default, enabling RPKI does not change best path selection. In particular, + invalid prefixes will still be considered during best path selection. However, + the router can be configured to ignore all invalid prefixes. +- Route maps can be configured to match a specific RPKI validation state. This + allows the creation of local policies, which handle BGP routes based on the + outcome of the Prefix Origin Validation. +- Updates from the RPKI cache servers are directly applied and path selection is + updated accordingly. (Soft reconfiguration must be enabled for this to work). + +## Configuration + +```{cfgcmd} set protocols rpki polling-period \<1-86400\> + +Define the time interval to update the local cache + +The default value is 300 seconds. +``` + +```{cfgcmd} set protocols rpki expire-interval \<600-172800\> + +Set the number of seconds the router waits until the router +expires the cache. + +The default value is 7200 seconds. +``` + +```{cfgcmd} set protocols rpki retry-interval \<1-7200\> + +Set the number of seconds the router waits until retrying to connect +to the cache server. + +The default value is 600 seconds. +``` + +```{cfgcmd} set protocols rpki cache \ port \ + +Defined the IPv4, IPv6 or FQDN and port number of the caching RPKI caching +instance which is used. + +This is a mandatory setting. +``` + +```{cfgcmd} set protocols rpki cache \ preference \ + +Multiple RPKI caching instances can be supplied and they need a preference in +which their result sets are used. + +This is a mandatory setting. +``` + + +### SSH + +Connections to the RPKI caching server can not only be established by TCP using +the RTR protocol but you can also rely on a secure SSH session to the server. +This provides transport integrity and confidentiality and it is a good idea if +your validation software supports it. To enable SSH, first you need to create +an SSH client keypair using `generate ssh client-key +/config/auth/id_rsa_rpki`. Once your key is created you can setup the +connection. + +```{cfgcmd} set protocols rpki cache \ ssh username \ + +SSH username to establish an SSH connection to the cache server. +``` + +```{cfgcmd} set protocols rpki cache \ ssh private-key-file \ + +Local path that includes the private key file of the router. +``` + +```{cfgcmd} set protocols rpki cache \ ssh public-key-file \ + +Local path that includes the public key file of the router. +``` + +:::{note} +When using SSH, private-key-file and public-key-file +are mandatory options. +::: + +## Example + +We can build route-maps for import based on these states. Here is a simple +RPKI configuration, where `routinator` is the RPKI-validating "cache" +server with ip `192.0.2.1`: + +```none +set protocols rpki cache 192.0.2.1 port '3323' +set protocols rpki cache 192.0.2.1 preference '1' +``` + +Here is an example route-map to apply to routes learned at import. In this +filter we reject prefixes with the state `invalid`, and set a higher +`local-preference` if the prefix is RPKI `valid` rather than merely +`notfound`. + +```none +set policy route-map ROUTES-IN rule 10 action 'permit' +set policy route-map ROUTES-IN rule 10 match rpki 'valid' +set policy route-map ROUTES-IN rule 10 set local-preference '300' +set policy route-map ROUTES-IN rule 20 action 'permit' +set policy route-map ROUTES-IN rule 20 match rpki 'notfound' +set policy route-map ROUTES-IN rule 20 set local-preference '125' +set policy route-map ROUTES-IN rule 30 action 'deny' +set policy route-map ROUTES-IN rule 30 match rpki 'invalid' +``` + +Once your routers are configured to reject RPKI-invalid prefixes, you can +test whether the configuration is working correctly using Cloudflare's [test] +website. Keep in mind that in order for this to work, you need to have no +default routes or anything else that would still send traffic to RPKI-invalid +destinations. + +[excellent guide to rpki]: https://rpki.readthedocs.io/ +[help and operational guidance]: https://rpki.readthedocs.io/en/latest/about/help.html +[krill]: https://www.nlnetlabs.nl/projects/rpki/krill/ +[routinator]: https://www.nlnetlabs.nl/projects/rpki/routinator/ +[rpki-client]: https://www.rpki-client.org/ +[software]: https://rpki.readthedocs.io/en/latest/ops/tools.html#relying-party-software +[stayrtr]: https://github.com/bgp/stayrtr/ +[test]: https://isbgpsafeyet.com/ +[tweet by evilmog]: diff --git a/docs/configuration/protocols/md-segment-routing.md b/docs/configuration/protocols/md-segment-routing.md new file mode 100644 index 00000000..45c89a41 --- /dev/null +++ b/docs/configuration/protocols/md-segment-routing.md @@ -0,0 +1,359 @@ +(segment-routing)= + +# Segment Routing + +Segment Routing (SR) is a network architecture that is similar to source-routing +. In this architecture, the ingress router adds a list of segments, known as +SIDs, to the packet as it enters the network. These segments represent different +portions of the network path that the packet will take. + +The SR segments are portions of the network path taken by the packet, and are +called SIDs. At each node, the first SID of the list is read, executed as a +forwarding function, and may be popped to let the next node read the next SID of +the list. The SID list completely determines the path where the packet is +forwarded. + +Segment Routing can be applied to an existing MPLS-based data plane and defines +a control plane network architecture. In MPLS networks, segments are encoded as +MPLS labels and are added at the ingress router. These MPLS labels are then +exchanged and populated by Interior Gateway Protocols (IGPs) like IS-IS or OSPF +which are running on most ISPs. + +:::{note} +Segment routing defines a control plane network architecture and +can be applied to an existing MPLS based dataplane. In the MPLS networks, +segments are encoded as MPLS labels and are imposed at the ingress router. +MPLS labels are exchanged and populated by IGPs like IS-IS.Segment Routing +as per RFC8667 for MPLS dataplane. It supports IPv4, IPv6 and ECMP and has +been tested against Cisco & Juniper routers.however,this deployment is still +EXPERIMENTAL for FRR. +::: + +## IS-IS SR Configuration + +Segment routing (SR) is used by the IGP protocols to interconnect network +devices, below configuration shows how to enable SR on IS-IS: + +:::{note} +``Known limitations:`` + +No support for level redistribution (L1 to L2 or L2 to L1) + +No support for binding SID + +No support for SRLB + +Only one SRGB and default SPF Algorithm is supported +::: + +```{cfgcmd} set protocols isis segment-routing global-block high-label-value \ + +Set the Segment Routing Global Block i.e. the label range used by MPLS to +store label in the MPLS FIB for Prefix SID. Note that the block size may +not exceed 65535. +``` + + +```{cfgcmd} set protocols isis segment-routing global-block low-label-value \ + +Set the Segment Routing Global Block i.e. the low label range used by MPLS to +store label in the MPLS FIB for Prefix SID. Note that the block size may +not exceed 65535. +``` + + +```{cfgcmd} set protocols isis segment-routing local-block high-label-value \ + +Set the Segment Routing Local Block i.e. the label range used by MPLS to +store label in the MPLS FIB for Prefix SID. Note that the block size may +not exceed 65535.Segment Routing Local Block, The negative command always +unsets both. +``` + + +```{cfgcmd} set protocols isis segment-routing local-block \ + +Set the Segment Routing Local Block i.e. the low label range used by MPLS to +store label in the MPLS FIB for Prefix SID. Note that the block size may +not exceed 65535.Segment Routing Local Block, The negative command always +unsets both. +``` + + +```{cfgcmd} set protocols isis segment-routing maximum-label-depth \<1-16\> + +Set the Maximum Stack Depth supported by the router. The value depend of +the MPLS dataplane. +``` + + +```{cfgcmd} set protocols isis segment-routing prefix \ index value \<0-65535\> + +A segment ID that contains an IP address prefix calculated by an IGP in the +service provider core network. Prefix SIDs are globally unique, this value +indentify it +``` + + +```{cfgcmd} set protocols isis segment-routing prefix \ index \ + +this option allows to configure prefix-sid on SR. The ‘no-php-flag’ means NO +Penultimate Hop Popping that allows SR node to request to its neighbor to +not pop the label. The ‘explicit-null’ flag allows SR node to request to its +neighbor to send IP packet with the EXPLICIT-NULL label. The ‘n-flag-clear’ +option can be used to explicitly clear the Node flag that is set by default +for Prefix-SIDs associated to loopback addresses. This option is necessary +to configure Anycast-SIDs. +``` + +```{opcmd} show isis segment-routing node + + Show detailed information about all learned Segment Routing Nodes +``` + + +```{opcmd} show isis route prefix-sid + +Show detailed information about prefix-sid and label learned +``` + +:::{note} +more information related IGP - {ref}`routing-isis` +::: + + +## OSPF SR Configuration + + +Segment routing (SR) is used by the IGP protocols to interconnect network +devices, below configuration shows how to enable SR on OSPF: + +```{cfgcmd} set protocols ospf parameters opaque-lsa + +Enable the Opaque-LSA capability (rfc2370), necessary to transport label +on IGP +``` + +```{cfgcmd} set protocols ospf segment-routing global-block high-label-value \ + +Set the Segment Routing Global Block i.e. the label range used by MPLS to +store label in the MPLS FIB for Prefix SID. Note that the block size may +not exceed 65535. +``` + +```{cfgcmd} set protocols ospf segment-routing global-block low-label-value \ + +Set the Segment Routing Global Block i.e. the low label range used by MPLS to +store label in the MPLS FIB for Prefix SID. Note that the block size may +not exceed 65535. +``` + +```{cfgcmd} set protocols ospf segment-routing local-block high-label-value \ + +Set the Segment Routing Local Block i.e. the label range used by MPLS to +store label in the MPLS FIB for Prefix SID. Note that the block size may +not exceed 65535.Segment Routing Local Block, The negative command always +unsets both. +``` + +```{cfgcmd} set protocols ospf segment-routing local-block \ + +Set the Segment Routing Local Block i.e. the low label range used by MPLS to +store label in the MPLS FIB for Prefix SID. Note that the block size may +not exceed 65535.Segment Routing Local Block, The negative command always +unsets both. +``` + +```{cfgcmd} set protocols ospf segment-routing maximum-label-depth \<1-16\> + +Set the Maximum Stack Depth supported by the router. The value depend of +the MPLS dataplane. +``` + +```{cfgcmd} set protocols ospf segment-routing prefix \ index value \<0-65535\> + +A segment ID that contains an IP address prefix calculated by an IGP in the +service provider core network. Prefix SIDs are globally unique, this value +indentify it +``` + +```{cfgcmd} set protocols ospf segment-routing prefix \ index \ + +this option allows to configure prefix-sid on SR. The ‘no-php-flag’ means NO +Penultimate Hop Popping that allows SR node to request to its neighbor to +not pop the label. The ‘explicit-null’ flag allows SR node to request to its +neighbor to send IP packet with the EXPLICIT-NULL label. The ‘n-flag-clear’ +option can be used to explicitly clear the Node flag that is set by default +for Prefix-SIDs associated to loopback addresses. This option is necessary +to configure Anycast-SIDs. +``` + +:::{note} +more information related IGP - {ref}`routing-ospf` +::: + +## Configuration Example + +we described the configuration SR ISIS / SR OSPF using 2 connected with them to +share label information. + +### Enable IS-IS with Segment Routing (Experimental) + +**Node 1:** + +```none +set interfaces loopback lo address '192.168.255.255/32' +set interfaces ethernet eth1 address '192.0.2.1/24' + +set protocols isis interface eth1 +set protocols isis interface lo +set protocols isis net '49.0001.1921.6825.5255.00' +set protocols isis segment-routing global-block high-label-value '599' +set protocols isis segment-routing global-block low-label-value '550' +set protocols isis segment-routing prefix 192.168.255.255/32 index value '1' +set protocols isis segment-routing prefix 192.168.255.255/32 index explicit-null +set protocols mpls interface 'eth1' +``` + +**Node 2:** + +```none +set interfaces loopback lo address '192.168.255.254/32' +set interfaces ethernet eth1 address '192.0.2.2/24' + +set protocols isis interface eth1 +set protocols isis interface lo +set protocols isis net '49.0001.1921.6825.5254.00' +set protocols isis segment-routing global-block high-label-value '599' +set protocols isis segment-routing global-block low-label-value '550' +set protocols isis segment-routing prefix 192.168.255.254/32 index value '2' +set protocols isis segment-routing prefix 192.168.255.254/32 index explicit-null +set protocols mpls interface 'eth1' +``` + +This gives us MPLS segment routing enabled and labels for far end loopbacks: + +```none +Node-1@vyos:~$ show mpls table + Inbound Label Type Nexthop Outbound Label + ---------------------------------------------------------------------- + 552 SR (IS-IS) 192.0.2.2 IPv4 Explicit Null <-- Node-2 loopback learned on Node-1 + 15000 SR (IS-IS) 192.0.2.2 implicit-null + 15001 SR (IS-IS) fe80::e87:6cff:fe09:1 implicit-null + 15002 SR (IS-IS) 192.0.2.2 implicit-null + 15003 SR (IS-IS) fe80::e87:6cff:fe09:1 implicit-null + +Node-2@vyos:~$ show mpls table + Inbound Label Type Nexthop Outbound Label + --------------------------------------------------------------------- + 551 SR (IS-IS) 192.0.2.1 IPv4 Explicit Null <-- Node-1 loopback learned on Node-2 + 15000 SR (IS-IS) 192.0.2.1 implicit-null + 15001 SR (IS-IS) fe80::e33:2ff:fe80:1 implicit-null + 15002 SR (IS-IS) 192.0.2.1 implicit-null + 15003 SR (IS-IS) fe80::e33:2ff:fe80:1 implicit-null +``` + +Here is the routing tables showing the MPLS segment routing label operations: + +```none +Node-1@vyos:~$ show ip route isis +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +I 192.0.2.0/24 [115/20] via 192.0.2.2, eth1 inactive, weight 1, 00:07:48 +I>* 192.168.255.254/32 [115/20] via 192.0.2.2, eth1, label IPv4 Explicit Null, weight 1, 00:03:39 + +Node-2@vyos:~$ show ip route isis +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +I 192.0.2.0/24 [115/20] via 192.0.2.1, eth1 inactive, weight 1, 00:07:46 +I>* 192.168.255.255/32 [115/20] via 192.0.2.1, eth1, label IPv4 Explicit Null, weight 1, 00:03:43 +``` + + +### Enable OSPF with Segment Routing (Experimental): + +**Node 1** + +```none +set interfaces loopback lo address 10.1.1.1/32 +set interfaces ethernet eth0 address 192.168.0.1/24 +set protocols ospf area 0 network '192.168.0.0/24' +set protocols ospf area 0 network '10.1.1.1/32' +set protocols ospf parameters opaque-lsa +set protocols ospf parameters router-id '10.1.1.1' +set protocols ospf segment-routing global-block high-label-value '1100' +set protocols ospf segment-routing global-block low-label-value '1000' +set protocols ospf segment-routing prefix 10.1.1.1/32 index explicit-null +set protocols ospf segment-routing prefix 10.1.1.1/32 index value '1' +``` + +**Node 2** + +```none +set interfaces loopback lo address 10.1.1.2/32 +set interfaces ethernet eth0 address 192.168.0.2/24 +set protocols ospf area 0 network '192.168.0.0/24' +set protocols ospf area 0 network '10.1.1.2/32' +set protocols ospf parameters opaque-lsa +set protocols ospf parameters router-id '10.1.1.2' +set protocols ospf segment-routing global-block high-label-value '1100' +set protocols ospf segment-routing global-block low-label-value '1000' +set protocols ospf segment-routing prefix 10.1.1.2/32 index explicit-null +set protocols ospf segment-routing prefix 10.1.1.2/32 index value '2' +``` + +This gives us MPLS segment routing enabled and labels for far end loopbacks: + +```none +Node-1@vyos:~$ show mpls table + Inbound Label Type Nexthop Outbound Label + ----------------------------------------------------------- + 1002 SR (OSPF) 192.168.0.2 IPv4 Explicit Null <-- Node-2 loopback learned on Node-1 + 15000 SR (OSPF) 192.168.0.2 implicit-null + 15001 SR (OSPF) 192.168.0.2 implicit-null + +Node-2@vyos:~$ show mpls table + Inbound Label Type Nexthop Outbound Label + ----------------------------------------------------------- + 1001 SR (OSPF) 192.168.0.1 IPv4 Explicit Null <-- Node-1 loopback learned on Node-2 + 15000 SR (OSPF) 192.168.0.1 implicit-null + 15001 SR (OSPF) 192.168.0.1 implicit-null +``` + +Here is the routing tables showing the MPLS segment routing label operations: + +```none +Node-1@vyos:~$ show ip route ospf +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +O 10.1.1.1/32 [110/0] is directly connected, lo, weight 1, 00:03:43 +O>* 10.1.1.2/32 [110/1] via 192.168.0.2, eth0, label IPv4 Explicit Null, weight 1, 00:03:32 +O 192.168.0.0/24 [110/1] is directly connected, eth0, weight 1, 00:03:43 + +Node-2@vyos:~$ show ip route ospf +Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure + +O>* 10.1.1.1/32 [110/1] via 192.168.0.1, eth0, label IPv4 Explicit Null, weight 1, 00:03:36 +O 10.1.1.2/32 [110/0] is directly connected, lo, weight 1, 00:03:51 +O 192.168.0.0/24 [110/1] is directly connected, eth0, weight 1, 00:03:51 +``` diff --git a/docs/configuration/protocols/md-static.md b/docs/configuration/protocols/md-static.md new file mode 100644 index 00000000..357f7076 --- /dev/null +++ b/docs/configuration/protocols/md-static.md @@ -0,0 +1,298 @@ +(routing-static)= + +# Static + +Static routes are manually configured routes, which, in general, cannot be +updated dynamically from information VyOS learns about the network topology from +other routing protocols. However, if a link fails, the router will remove +routes, including static routes, from the {abbr}`RIPB (Routing Information +Base)` that used this interface to reach the next hop. In general, static +routes should only be used for very simple network topologies, or to override +the behavior of a dynamic routing protocol for a small number of routes. The +collection of all routes the router has learned from its configuration or from +its dynamic routing protocols is stored in the RIB. Unicast routes are directly +used to determine the forwarding table used for unicast packet forwarding. + +## IPv4 Unicast Routes + +```{cfgcmd} set protocols static route \ next-hop \ + +Configure next-hop *\* for an IPv4 static route. Multiple static +routes can be created. +``` + +```{cfgcmd} set protocols static route \ next-hop \ disable + +Disable this IPv4 static route entry. +``` + +```{cfgcmd} set protocols static route \ next-hop \ distance \ + +Defines next-hop distance for this route, routes with smaller administrative +distance are elected prior to those with a higher distance. + +Range is 1 to 255, default is 1. + +:::{note} +Routes with a distance of 255 are effectively disabled and not +installed into the kernel. +::: +``` + + +### IPv4 Interface Routes + +```{cfgcmd} set protocols static route \ interface \ + +Allows you to configure the next-hop interface for an interface-based IPv4 +static route. *\* will be the next-hop interface where traffic is +routed for the given *\*. +``` + +```{cfgcmd} set protocols static route \ interface \ disable + +Disables interface-based IPv4 static route. +``` + +```{cfgcmd} set protocols static route \ interface \ distance \ + +Defines next-hop distance for this route, routes with smaller administrative +distance are elected prior to those with a higher distance. + +Range is 1 to 255, default is 1. +``` + + +### IPv4 BFD + +```{cfgcmd} set protocols static route \ next-hop \ bfd + +Configure a static route for *\* using gateway *\* and use the +gateway address as BFD peer destination address. +``` + +```{cfgcmd} set protocols static route \ next-hop \ bfd profile \ + +Configure a static route for *\* using gateway *\* and use the +gateway address as BFD peer destination address with BFD profile *\*. +``` + +```{cfgcmd} set protocols static route \ next-hop \ bfd multi-hop source-address \ + +Configure a static route for *\* using gateway *\* and use the +gateway address as BFD peer destination address with source address +*\* but initiate a multi-hop session. +``` + + +### DHCP Interface Routes + +```{cfgcmd} set protocols static route \ dhcp-interface \ + +Defines route with DHCP interface supplying next-hop IP address. +``` + + +### IPv4 Reject Routes + +```{cfgcmd} set protocol static route \ reject + +Defines route which emits an ICMP unreachable when matched. +``` + +```{cfgcmd} set protocols static route \ reject distance \ + +Defines distance for this route, routes with smaller administrative +distance are elected prior to those with a higher distance. +``` + +```{cfgcmd} set protocols static route \ reject tag \ + +Sets a tag for this route. +``` + +```{cfgcmd} set protocol static route6 \ reject + +Defines route which emits an ICMP unreachable when matched. +``` + + +### IPv4 Blackhole Routes + +```{cfgcmd} set protocols static route \ blackhole + +Use this command to configure a "black-hole" route on the router. A +black-hole route is a route for which the system silently discard packets +that are matched. This prevents networks leaking out public interfaces, but +it does not prevent them from being used as a more specific route inside your +network. +``` + +```{cfgcmd} set protocols static route \ blackhole distance \ + +Defines blackhole distance for this route, routes with smaller administrative +distance are elected prior to those with a higher distance. +``` + +```{cfgcmd} set protocols static route \ blackhole tag \ + +Sets a tag for this route. +``` + + +## IPv6 Unicast Routes + +```{cfgcmd} set protocols static route6 \ next-hop \ + +Configure next-hop *\* for an IPv6 static route. Multiple static +routes can be created. +``` + +```{cfgcmd} set protocols static route6 \ next-hop \ disable + +Disable this IPv6 static route entry. +``` + +```{cfgcmd} set protocols static route6 \ next-hop \ distance \ + +Defines next-hop distance for this route, routes with smaller administrative +distance are elected prior to those with a higher distance. + +Range is 1 to 255, default is 1. + +:::{note} +Routes with a distance of 255 are effectively disabled and not +installed into the kernel. +::: +``` + +```{cfgcmd} set protocols static route6 \ next-hop \ segments \ + +It is possible to specify a static route for ipv6 prefixes using an +SRv6 segments instruction. The ``/`` separator can be used to specify +multiple segment instructions. + +Example: + +:::{code-block} none +set protocols static route6 2001:db8:1000::/36 next-hop 2001:db8:201::ffff segments '2001:db8:aaaa::7/2002::4/2002::3/2002::2' +::: + +:::{code-block} none +vyos@vyos:~$ show ipv6 route +Codes: K - kernel route, C - connected, S - static, R - RIPng, + O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table, + v - VNC, V - VNC-Direct, A - Babel, F - PBR, + f - OpenFabric, + > - selected route, * - FIB route, q - queued, r - rejected, b - backup + t - trapped, o - offload failure +C>* 2001:db8:201::/64 is directly connected, eth0.201, 00:00:46 +S>* 2001:db8:1000::/36 [1/0] via 2001:db8:201::ffff, eth0.201, seg6 2001:db8:aaaa::7,2002::4,2002::3,2002::2, weight 1, 00:00:08 +::: +``` + + +### IPv6 Interface Routes + +```{cfgcmd} set protocols static route6 \ interface \ + +Allows you to configure the next-hop interface for an interface-based IPv6 +static route. *\* will be the next-hop interface where traffic is +routed for the given *\*. +``` + +```{cfgcmd} set protocols static route6 \ interface \ disable + +Disables interface-based IPv6 static route. +``` + +```{cfgcmd} set protocols static route6 \ interface \ distance \ + +Defines next-hop distance for this route, routes with smaller administrative +distance are elected prior to those with a higher distance. + +Range is 1 to 255, default is 1. +``` + +```{cfgcmd} set protocols static route6 \ interface \ segments \ + +It is possible to specify a static route for ipv6 prefixes using an +SRv6 segments instruction. The ``/`` separator can be used to specify +multiple segment instructions. + +Example: + +:::{code-block} none +set protocols static route6 2001:db8:1000::/36 interface eth0 segments '2001:db8:aaaa::7/2002::4/2002::3/2002::2' +::: +``` + + +### IPv6 BFD + +```{cfgcmd} set protocols static route6 \ next-hop \ bfd + +Configure a static route for *\* using gateway *\* and use the +gateway address as BFD peer destination address. +``` + +```{cfgcmd} set protocols static route6 \ next-hop \ bfd profile \ + +Configure a static route for *\* using gateway *\* and use the +gateway address as BFD peer destination address with BFD profile *\*. +``` + +```{cfgcmd} set protocols static route6 \ next-hop \ bfd multi-hop source-address \ + +Configure a static route for *\* using gateway *\* and use the +gateway address as BFD peer destination address with source address +*\* but initiate a multi-hop session. +``` + + +### IPv6 Reject Routes + +```{cfgcmd} set protocol static route6 \ reject + +Defines route which emits an ICMP unreachable when matched. +``` + +```{cfgcmd} set protocols static route6 \ reject distance \ + +Defines distance for this route, routes with smaller administrative +distance are elected prior to those with a higher distance. +``` + +```{cfgcmd} set protocols static route6 \ reject tag \ + +Sets a tag for this route. +``` + + +### IPv6 Blackhole Routes + +```{cfgcmd} set protocols static route6 \ blackhole + +Use this command to configure a "black-hole" route on the router. A +black-hole route is a route for which the system silently discard packets +that are matched. This prevents networks leaking out public interfaces, but +it does not prevent them from being used as a more specific route inside your +network. +``` + +```{cfgcmd} set protocols static route6 \ blackhole distance \ + +Defines blackhole distance for this route, routes with smaller administrative +distance are elected prior to those with a higher distance. +``` + +```{cfgcmd} set protocols static route6 \ blackhole tag \ + +Sets a tag for this route. +``` + + +## Alternate Routing Tables + +Alternate routing tables are used with policy based routing by utilizing +{ref}`vrf`. diff --git a/docs/configuration/protocols/md-traffic-engineering.md b/docs/configuration/protocols/md-traffic-engineering.md new file mode 100644 index 00000000..832023a7 --- /dev/null +++ b/docs/configuration/protocols/md-traffic-engineering.md @@ -0,0 +1,54 @@ +(traffic-engineering)= + +# Traffic Engineering + +Traffic Engineering (TE) is possibility to send traffic from node to node using +alternative path. + +## Common link parameters + +Traffic Engineering parameters are used for both IS-IS and OSPF (not supported yet). + +```{cfgcmd} set protocols traffic-engineering admin-group \ bit-position \ + +Create Administrative group and assosiate bit position with it. These groups can be +used in the following commands. + +\ can have value 0-31. There cannot be two groups with same bit position. +``` + + +```{cfgcmd} set protocols traffic-engineering interface \ admin-group \ + +Set administrative group for interface \. Multiple values can be provided. +``` + + +```{cfgcmd} set protocols traffic-engineering interface \ max-bandwidth \ + +Set maximum bandwidth for interface \. Value given in Mbits per second. +``` + + +```{cfgcmd} set protocols traffic-engineering interface \ max-reservable-bandwidth \ + +Set maximum reservable bandwidth for interface \. Value given in Mbits per second. +``` + +## IS-IS TE Configuration + +Traffic Engineering (TE) can be enabled and exported for IS-IS +using the following commands: + +```{cfgcmd} set protocols isis traffic-engineering enable + +Enable Traffic Engineering for IS-IS. +``` +```{cfgcmd} set protocols isis traffic-engineering export + +Export Traffic Engineering data to neighbors. +``` +```{cfgcmd} set protocols isis traffic-engineering address \ + +Configure IPv4 address for MPLS-TE. +``` \ No newline at end of file diff --git a/docs/configuration/protocols/mpls.md b/docs/configuration/protocols/mpls.md deleted file mode 100644 index 71b14be2..00000000 --- a/docs/configuration/protocols/mpls.md +++ /dev/null @@ -1,285 +0,0 @@ -(mpls)= - -# MPLS - -{abbr}`MPLS (Multi-Protocol Label Switching)` is a packet forwarding paradigm -which differs from regular IP forwarding. Instead of IP addresses being used to -make the decision on finding the exit interface, a router will instead use an -exact match on a 32 bit/4 byte header called the MPLS label. This label is -inserted between the ethernet (layer 2) header and the IP (layer 3) header. -One can statically or dynamically assign label allocations, but we will focus -on dynamic allocation of labels using some sort of label distribution protocol -(such as the aptly named Label Distribution Protocol / LDP, Resource Reservation -Protocol / RSVP, or Segment Routing through OSPF/ISIS). These protocols allow -for the creation of a unidirectional/unicast path called a labeled switched -path (initialized as LSP) throughout the network that operates very much like -a tunnel through the network. An easy way of thinking about how an MPLS LSP -actually forwards traffic throughout a network is to think of a GRE tunnel. -They are not the same in how they operate, but they are the same in how they -handle the tunneled packet. It would be good to think of MPLS as a tunneling -technology that can be used to transport many different types of packets, to -aid in traffic engineering by allowing one to specify paths throughout the -network (using RSVP or SR), and to generally allow for easier intra/inter -network transport of data packets. - -For more information on how MPLS label switching works, please go visit -[Wikipedia (MPLS)]. - -:::{note} -MPLS support in VyOS is not finished yet, and therefore its -functionality is limited. Currently there is no support for MPLS enabled VPN -services such as L2VPNs and mVPNs. RSVP support is also not present as the -underlying routing stack (FRR) does not implement it. Currently VyOS -implements LDP as described in RFC 5036; other LDP standard are the -following ones: RFC 6720, RFC 6667, RFC 5919, RFC 5561, RFC 7552, RFC 4447. -Because MPLS is already available (FRR also supports RFC 3031). -::: - -## Label Distribution Protocol - -The {abbr}`MPLS (Multi-Protocol Label Switching)` architecture does not assume -a single protocol to create MPLS paths. VyOS supports the Label Distribution -Protocol (LDP) as implemented by FRR, based on {rfc}`5036`. - -{abbr}`LDP (Label Distribution Protocol)` is a TCP based MPLS signaling protocol -that distributes labels creating MPLS label switched paths in a dynamic manner. -LDP is not a routing protocol, as it relies on other routing protocols for -forwarding decisions. LDP cannot bootstrap itself, and therefore relies on said -routing protocols for communication with other routers that use LDP. - -In order to allow for LDP on the local router to exchange label advertisements -with other routers, a TCP session will be established between automatically -discovered and statically assigned routers. LDP will try to establish a TCP -session to the **transport address** of other routers. Therefore for LDP to -function properly please make sure the transport address is shown in the -routing table and reachable to traffic at all times. - -It is highly recommended to use the same address for both the LDP router-id and -the discovery transport address, but for VyOS MPLS LDP to work both parameters -must be explicitly set in the configuration. - -Another thing to keep in mind with LDP is that much like BGP, it is a protocol -that runs on top of TCP. It however does not have an ability to do something -like a refresh capability like BGPs route refresh capability. Therefore one -might have to reset the neighbor for a capability change or a configuration -change to work. - -## Configuration Options - -```{cfgcmd} set protocols mpls interface \ - -Use this command to enable MPLS processing on the interface you define. -``` - - -```{cfgcmd} set protocols mpls ldp interface \ - -Use this command to enable LDP on the interface you define. -``` - - -```{cfgcmd} set protocols mpls ldp router-id \ - -Use this command to configure the IP address used as the LDP router-id of the -local device. -``` - - -```{cfgcmd} set protocols mpls ldp discovery transport-ipv4-address \ - -``` -```{cfgcmd} set protocols mpls ldp discovery transport-ipv6-address \ - -Use this command to set the IPv4 or IPv6 transport-address used by LDP. -``` - -```{cfgcmd} set protocols mpls ldp neighbor \ password \ - -Use this command to configure authentication for LDP peers. Set the -IP address of the LDP peer and a password that should be shared in -order to become neighbors. -``` - -```{cfgcmd} set protocols mpls ldp neighbor \ session-holdtime \ - -Use this command to configure a specific session hold time for LDP peers. -Set the IP address of the LDP peer and a session hold time that should be -configured for it. You may have to reset the neighbor for this to work. -``` - -```{cfgcmd} set protocols mpls ldp neighbor \ ttl-security \ - -Use this command to enable, disable, or specify hop count for TTL security -for LDP peers. By default the value is set to 255 (or max TTL). -``` - -```{eval-rst} -.. cfgcmd:: set protocols mpls ldp discovery hello-ipv4-interval -.. cfgcmd:: set protocols mpls ldp discovery hello-ipv4-holdtime -.. cfgcmd:: set protocols mpls ldp discovery hello-ipv6-interval -.. cfgcmd:: set protocols mpls ldp discovery hello-ipv6-holdtime - - Use these commands if you would like to set the discovery hello and hold time - parameters. -``` - -```{eval-rst} -.. cfgcmd:: set protocols mpls ldp discovery session-ipv4-holdtime -.. cfgcmd:: set protocols mpls ldp discovery session-ipv6-holdtime - - Use this command if you would like to set the TCP session hold time intervals. -``` - -```{eval-rst} -.. cfgcmd:: set protocols mpls ldp import ipv4 import-filter filter-access-list - -.. cfgcmd:: set protocols mpls ldp import ipv6 import-filter filter-access-list6 - - - Use these commands to control the importing of forwarding equivalence classes - (FECs) for LDP from neighbors. This would be useful for example on only - accepting the labeled routes that are needed and not ones that are not - needed, such as accepting loopback interfaces and rejecting all others. -``` - -```{eval-rst} -.. cfgcmd:: set protocols mpls ldp export ipv4 export-filter filter-access-list - -.. cfgcmd:: set protocols mpls ldp export ipv6 export-filter filter-access-list6 - - - Use these commands to control the exporting of forwarding equivalence classes - (FECs) for LDP to neighbors. This would be useful for example on only - announcing the labeled routes that are needed and not ones that are not - needed, such as announcing loopback interfaces and no others. -``` - -```{eval-rst} -.. cfgcmd:: set protocols mpls ldp export ipv4 explicit-null -.. cfgcmd:: set protocols mpls ldp export ipv6 explicit-null - - Use this command if you would like for the router to advertise FECs with a - label of 0 for explicit null operations. -``` - -```{eval-rst} -.. cfgcmd:: set protocols mpls ldp allocation ipv4 access-list -.. cfgcmd:: set protocols mpls ldp allocation ipv6 access-list6 - - Use this command if you would like to control the local FEC allocations for - LDP. A good example would be for your local router to not allocate a label for - everything. Just a label for what it's useful. A good example would be just a - loopback label. -``` - -```{cfgcmd} set protocols mpls ldp parameters cisco-interop-tlv - -Use this command to use a Cisco non-compliant format to send and interpret -the Dual-Stack capability TLV for IPv6 LDP communications. This is related to -{rfc}`7552`. -``` - -```{cfgcmd} set protocols mpls ldp parameters ordered-control - -Use this command to use ordered label distribution control mode. FRR -by default uses independent label distribution control mode for label -distribution. This is related to {rfc}`5036`. -``` - -```{cfgcmd} set protocols mpls ldp parameters transport-prefer-ipv4 - -Use this command to prefer IPv4 for TCP peer transport connection for LDP -when both an IPv4 and IPv6 LDP address are configured on the same interface. -``` - -```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv4 enable -``` - -```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv6 enable - -Use this command to enable targeted LDP sessions to the local router. The -router will then respond to any sessions that are trying to connect to it that -are not a link local type of TCP connection. -``` - -```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv4 address \ -``` - -```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv6 address \ - -Use this command to enable the local router to try and connect with a targeted -LDP session to another router. -``` - -```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv4 hello-holdtime \ -``` - -```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv4 hello-interval \ -``` - -```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv6 hello-holdtime \ -``` - -```{cfgcmd} set protocols mpls ldp targeted-neighbor ipv6 hello-interval \ - -Use these commands if you would like to set the discovery hello and hold time -parameters for the targeted LDP neighbors. -``` - -### Sample configuration to setup LDP on VyOS - -```none -set protocols ospf area 0 network '192.168.255.252/32' <--- Routing for loopback -set protocols ospf area 0 network '192.168.0.5/32' <--- Routing for an interface connecting to the network -set protocols ospf parameters router-id '192.168.255.252' <--- Router ID setting for OSPF -set protocols mpls interface 'eth1' <--- Enable MPLS for an interface connecting to network -set protocols mpls ldp discovery transport-ipv4-address '192.168.255.252' <--- Transport address for LDP for TCP sessions to connect to -set protocols mpls ldp interface 'eth1' <--- Enable LDP for an interface connecting to network -set protocols mpls ldp interface 'lo' <--- Enable LDP on loopback for future services connectivity -set protocols mpls ldp router-id '192.168.255.252' <--- Router ID setting for LDP -set interfaces ethernet eth1 address '192.168.0.5/31' <--- Interface IP for connecting to network -set interfaces loopback lo address '192.168.255.252/32' <--- Interface loopback IP for router ID and other uses -``` - -## Operational Mode Commands - -When LDP is working, you will be able to see label information in the outcome -of `show ip route`. Besides that information, there are also specific *show* -commands for LDP: - -### Show - -```{opcmd} show mpls ldp binding - -Use this command to see the Label Information Base. - -``` - -```{opcmd} show mpls ldp discovery - -Use this command to see discovery hello information -``` - -```{opcmd} show mpls ldp interface - -Use this command to see LDP interface information -``` - -```{opcmd} show mpls ldp neighbor - -Use this command to see LDP neighbor information -``` - -```{opcmd} show mpls ldp neighbor detail - -Use this command to see detailed LDP neighbor information -``` - -### Reset - -```{opcmd} reset mpls ldp neighbor \ - -Use this command to reset an LDP neighbor/TCP session that is established -``` - -[wikipedia (mpls)]: diff --git a/docs/configuration/protocols/multicast.md b/docs/configuration/protocols/multicast.md deleted file mode 100644 index 27150a29..00000000 --- a/docs/configuration/protocols/multicast.md +++ /dev/null @@ -1,31 +0,0 @@ -(routing-static)= - -# Multicast - -In order to influence Multicast {abbr}`RPF (Reverse Path Forwarding)` lookup, -it is possible to insert into zebra routes for the Multicast -{abbr}`RIB (Routing Information Base)`. These routes are only used for RPF -lookup and will not be used by ZEBRA for insertion into the kernel or for -normal RIB processing. As such it is possible to create weird states with -these commands. - -Use with caution. Most of the time this will not be necessary. - -```{cfgcmd} set protocols static mroute \ next-hop \ [distance \] - -Insert into the Multicast RIB Route `` with specified next-hop. -The distance can be specified as well if desired. -``` -```{cfgcmd} set protocols static mroute \ next-hop \ disable - -Do not install route for `` into the Multicast RIB. -``` -```{cfgcmd} set protocols static mroute \ interface \ [distance \] - -Insert into the Multicast RIB Route `` with specified ``. -The distance can be specified as well if desired. -``` -```{cfgcmd} set protocols static mroute \ interface \ disable - -Do not install route for `` into the Multicast RIB. -``` \ No newline at end of file diff --git a/docs/configuration/protocols/openfabric.md b/docs/configuration/protocols/openfabric.md deleted file mode 100644 index 09ff5900..00000000 --- a/docs/configuration/protocols/openfabric.md +++ /dev/null @@ -1,242 +0,0 @@ -(openfabric)= - -# OpenFabric - -OpenFabric, specified in [draft-white-openfabric-06.txt](https://datatracker.ietf.org/doc/html/draft-white-openfabric-06), is -a routing protocol derived from IS-IS, providing link-state routing with -efficient flooding for topologies like spine-leaf networks. - -OpenFabric a dual stack protocol. -A single OpenFabric instance is able to perform routing for both IPv4 and IPv6. - -## General - -### Configuration - -#### Mandatory Settings - -For OpenFabric to operate correctly, one must do the equivalent of a Router ID -in Connectionless Network Service (CLNS). This Router ID is called the -{abbr}`NET (Network Entity Title)`. The system identifier must be unique within -the network - -```{cfgcmd} set protocols openfabric net \ - -This command sets network entity title (NET) provided in ISO format. - -Here is an example {abbr}`NET (Network Entity Title)` value: - -:::{code-block} none -49.0001.1921.6800.1002.00 -::: -The CLNS address consists of the following parts: - -* {abbr}`AFI (Address family authority identifier)` - ``49`` The AFI value - 49 is what OpenFabric uses for private addressing. - -* Area identifier: ``0001`` OpenFabric area number (numerical area ``1``) - -* System identifier: ``1921.6800.1002`` - for system identifiers we recommend - to use IP address or MAC address of the router itself. The way to construct - this is to keep all of the zeroes of the router IP address, and then change - the periods from being every three numbers to every four numbers. The - address that is listed here is ``192.168.1.2``, which if expanded will turn - into ``192.168.001.002``. Then all one has to do is move the dots to have - four numbers instead of three. This gives us ``1921.6800.1002``. - -* {abbr}`NET (Network Entity Title)` selector: ``00`` Must always be 00. This - setting indicates "this system" or "local system." -``` - - -```{cfgcmd} set protocols openfabric domain \ interface \ address-family \ - -This command enables OpenFabric instance with \ on this interface, and -allows for adjacency to occur for address family (IPv4 or IPv6 or both). -``` - -#### OpenFabric Global Configuration - -```{cfgcmd} set protocols openfabric domain-password \ \ - -This command configures the authentication password for a routing domain, -as clear text or md5 one. -``` - - -```{cfgcmd} set protocols openfabric domain \ purge-originator - -This command enables {rfc}`6232` purge originator identification. -``` - - -```{cfgcmd} set protocols openfabric domain \ set-overload-bit - -This command sets overload bit to avoid any transit traffic through this -router. -``` - - -```{cfgcmd} set protocols openfabric domain \ log-adjacency-changes - -Log changes in adjacency state. -``` - - -```{cfgcmd} set protocols openfabric domain \ fabric-tier \ - -This command sets a static tier number to advertise as location -in the fabric. -``` - -#### Interface Configuration - -```{cfgcmd} set protocols openfabric interface \ hello-interval \ - -This command sets hello interval in seconds on a given interface. -The range is 1 to 600. Hello packets are used to establish and maintain -adjacency between OpenFabric neighbors. -``` - - -```{cfgcmd} set protocols openfabric domain \ interface \ hello-multiplier \ - -This command sets multiplier for hello holding time on a given -interface. The range is 2 to 100. -``` - - -```{cfgcmd} set protocols openfabric domain \ interface \ metric \ - -This command sets default metric for circuit. -The metric range is 1 to 16777215. -``` - - -```{cfgcmd} set protocols openfabric interface \ passive - -This command enables the passive mode for this interface. -``` - - -```{cfgcmd} set protocols openfabric domain \ interface \ password plaintext-password \ - -This command sets the authentication password for the interface. -``` - - -```{cfgcmd} set protocols openfabric domain \ interface \ csnp-interval \ - -This command sets Complete Sequence Number Packets (CSNP) interval in seconds. -The interval range is 1 to 600. -``` - - -```{cfgcmd} set protocols openfabric domain \ interface \ psnp-interval \ - -This command sets Partial Sequence Number Packets (PSNP) interval in seconds. -The interval range is 1 to 120. -``` - -#### Timers - -```{cfgcmd} set protocols openfabric domain \ lsp-gen-interval \ - -This command sets minimum interval at which link-state packets (LSPs) are -generated. The interval range is 1 to 120. -``` - - -```{cfgcmd} set protocols openfabric domain \ lsp-refresh-interval \ - -This command sets LSP refresh interval in seconds. The interval range -is 1 to 65235. -``` - - -```{cfgcmd} set protocols openfabric domain \ max-lsp-lifetime \ - -This command sets LSP maximum LSP lifetime in seconds. The interval range -is 360 to 65535. LSPs remain in a database for 1200 seconds by default. -If they are not refreshed by that time, they are deleted. You can change -the LSP refresh interval or the LSP lifetime. The LSP refresh interval -should be less than the LSP lifetime or else LSPs will time out before -they are refreshed. -``` - - -```{cfgcmd} set protocols openfabric domain \ spf-interval \ - -This command sets minimum interval between consecutive shortest path first -(SPF) calculations in seconds.The interval range is 1 to 120. -``` - -## Examples -### Enable OpenFabric - -**Node 1:** - -```none -set interfaces loopback lo address '192.168.255.255/32' -set interfaces ethernet eth1 address '192.0.2.1/24' - -set protocols openfabric domain VyOS interface eth1 address-family ipv4 -set protocols openfabric domain VyOS interface lo address-family ipv4 -set protocols openfabric net '49.0001.1921.6825.5255.00' -``` - -**Node 2:** - -```none -set interfaces loopback lo address '192.168.255.254/32' -set interfaces ethernet eth1 address '192.0.2.2/24' - -set protocols openfabric domain VyOS interface eth1 address-family ipv4 -set protocols openfabric domain VyOS interface lo address-family ipv4 -set protocols openfabric net '49.0001.1921.6825.5254.00' -``` - -This gives us the following neighborships: - -```none -Node-1@vyos:~$ show openfabric neighbor -show openfabric neighbor -Area VyOS: - System Id Interface L State Holdtime SNPA - vyos eth1 2 Up 27 2020.2020.2020 - - -Node-2@vyos:~$ show openfabric neighbor -show openfabric neighbor -Area VyOS: - System Id Interface L State Holdtime SNPA - vyos eth1 2 Up 30 2020.2020.2020 -``` - -Here's the IP routes that are populated: - -```none -Node-1@vyos:~$ show ip route openfabric -show ip route openfabric -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -f 192.0.2.0/24 [115/20] via 192.0.2.2, eth1 onlink, weight 1, 00:00:10 -f>* 192.168.255.254/32 [115/20] via 192.0.2.2, eth1 onlink, weight 1, 00:00:10 - -Node-2@vyos:~$ show ip route openfabric -show ip route openfabric -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -f 192.0.2.0/24 [115/20] via 192.0.2.1, eth1 onlink, weight 1, 00:00:48 -f>* 192.168.255.255/32 [115/20] via 192.0.2.1, eth1 onlink, weight 1, 00:00:48 -``` diff --git a/docs/configuration/protocols/ospf.md b/docs/configuration/protocols/ospf.md deleted file mode 100644 index 72fefb84..00000000 --- a/docs/configuration/protocols/ospf.md +++ /dev/null @@ -1,1504 +0,0 @@ -(routing-ospf)= - -# OSPF - -{abbr}`OSPF (Open Shortest Path First)` is a routing protocol for Internet -Protocol (IP) networks. It uses a link state routing (LSR) algorithm and falls -into the group of interior gateway protocols (IGPs), operating within a single -autonomous system (AS). It is defined as OSPF Version 2 in {rfc}`2328` (1998) -for IPv4. Updates for IPv6 are specified as OSPF Version 3 in {rfc}`5340` -(2008). OSPF supports the {abbr}`CIDR (Classless Inter-Domain Routing)` -addressing model. - -OSPF is a widely used IGP in large enterprise networks. - -## OSPFv2 (IPv4) - -### Configuration - -#### General - -VyOS does not have a special command to start the OSPF process. The OSPF process -starts when the first ospf enabled interface is configured. - -```{cfgcmd} set protocols ospf area \ network \ - - This command specifies the OSPF enabled interface(s). If the interface has - an address from defined range then the command enables OSPF on this - interface so router can provide network information to the other ospf - routers via this interface. - - This command is also used to enable the OSPF process. The area number can be - specified in decimal notation in the range from 0 to 4294967295. Or it - can be specified in dotted decimal notation similar to ip address. - - Prefix length in interface must be equal or bigger (i.e. smaller network) - than prefix length in network statement. For example statement above doesn't - enable ospf on interface with address 192.168.1.1/23, but it does on - interface with address 192.168.1.129/25. - - In some cases it may be more convenient to enable OSPF on a per - interface/subnet - basis {cfgcmd}`set protocols ospf interface area ` -``` - - -```{cfgcmd} set protocols ospf auto-cost reference-bandwidth \ - -This command sets the reference bandwidth for cost calculations, where -bandwidth can be in range from 1 to 4294967, specified in Mbits/s. The -default is 100Mbit/s (i.e. a link of bandwidth 100Mbit/s or higher will -have a cost of 1. Cost of lower bandwidth links will be scaled with -reference to this cost). -``` - - -```{cfgcmd} set protocols ospf parameters router-id \ - -This command sets the router-ID of the OSPF process. The router-ID may be an -IP address of the router, but need not be – it can be any arbitrary 32bit -number. However it MUST be unique within the entire OSPF domain to the OSPF -speaker – bad things will happen if multiple OSPF speakers are configured -with the same router-ID! -``` - -#### Optional - -```{cfgcmd} set protocols ospf default-information originate [always] [metric \] [metric-type \<1|2\>] [route-map \] - -Originate an AS-External (type-5) LSA describing a default route into all -external-routing capable areas, of the specified metric and metric type. -If the {cfgcmd}`always` keyword is given then the default is always -advertised, even when there is no default present in the routing table. -The argument {cfgcmd}`route-map` specifies to advertise the default route -if the route map is satisfied. -``` - - -```{cfgcmd} set protocols ospf distance global \ - -This command change distance value of OSPF globally. -The distance range is 1 to 255. -``` - - -```{cfgcmd} set protocols ospf distance ospf \ \ - -This command change distance value of OSPF. The arguments are the distance -values for external routes, inter-area routes and intra-area routes -respectively. The distance range is 1 to 255. - -:::{note} -Routes with a distance of 255 are effectively disabled and not -installed into the kernel. -::: -``` - - -```{cfgcmd} set protocols ospf log-adjacency-changes [detail] - -This command allows to log changes in adjacency. With the optional -{cfgcmd}`detail` argument, all changes in adjacency status are shown. -Without {cfgcmd}`detail`, only changes to full or regressions are shown. -``` - - -```{cfgcmd} set protocols ospf max-metric router-lsa \|on-startup \> - -This enables {rfc}`3137` support, where the OSPF process describes its -transit links in its router-LSA as having infinite distance so that other -routers will avoid calculating transit paths through the router while -still being able to reach networks through the router. - -This support may be enabled administratively (and indefinitely) with the -{cfgcmd}`administrative` command. It may also be enabled conditionally. -Conditional enabling of max-metric router-lsas can be for a period of -seconds after startup with the {cfgcmd}`on-startup ` command -and/or for a period of seconds prior to shutdown with the -{cfgcmd}`on-shutdown ` command. The time range is 5 to 86400. -``` - - -```{cfgcmd} set protocols ospf parameters abr-type \ - -This command selects ABR model. OSPF router supports four ABR models: - -**cisco** – a router will be considered as ABR if it has several configured -links to the networks in different areas one of which is a backbone area. -Moreover, the link to the backbone area should be active (working). -**ibm** – identical to "cisco" model but in this case a backbone area link -may not be active. -**standard** – router has several active links to different areas. -**shortcut** – identical to "standard" but in this model a router is -allowed to use a connected areas topology without involving a backbone -area for inter-area connections. - -Detailed information about "cisco" and "ibm" models differences can be -found in {rfc}`3509`. A "shortcut" model allows ABR to create routes -between areas based on the topology of the areas connected to this router -but not using a backbone area in case if non-backbone route will be -cheaper. For more information about "shortcut" model, -see ospf-shortcut-abr-02.txt -``` - - -```{cfgcmd} set protocols ospf parameters rfc1583-compatibility - -{rfc}`2328`, the successor to {rfc}`1583`, suggests according to section -G.2 (changes) in section 16.4.1 a change to the path preference algorithm -that prevents possible routing loops that were possible in the old version -of OSPFv2. More specifically it demands that inter-area paths and -intra-area backbone path are now of equal preference but still both -preferred to external paths. - -This command should NOT be set normally. -``` - - -```{cfgcmd} set protocols ospf interface \ passive [disable] - -This command specifies interface as passive. Passive interface advertises -its address, but does not run the OSPF protocol (adjacencies are not formed -and hello packets are not generated). - -The optional disable option allows to exclude interface from passive state. -This command is used if the command {cfgcmd}`passive-interface default` was -configured. -``` - - -```{cfgcmd} set protocols ospf passive-interface default - -This command specifies all interfaces as passive by default. Because this -command changes the configuration logic to a default passive; therefore, -interfaces where router adjacencies are expected need to be configured -with the {cfgcmd}`passive-interface-exclude` command. -``` - - -```{cfgcmd} set protocols ospf maximum-paths \<1-64\> - -Use this command to control the maximum number of equal cost paths to reach -a specific destination. The upper limit may differ if you change the value -of MULTIPATH_NUM during compilation. The default is MULTIPATH_NUM (64). -``` - - -```{cfgcmd} set protocols ospf refresh timers \ - -The router automatically updates link-state information with its neighbors. -Only an obsolete information is updated which age has exceeded a specific -threshold. This parameter changes a threshold value, which by default is -1800 seconds (half an hour). The value is applied to the whole OSPF router. -The timer range is 10 to 1800. -``` - - -```{cfgcmd} set protocols ospf timers throttle spf \ \ - -This command sets the initial delay, the initial-holdtime and the -maximum-holdtime between when SPF is calculated and the event which -triggered the calculation. The times are specified in milliseconds and must -be in the range of 0 to 600000 milliseconds. {cfgcmd}`delay` sets the -initial SPF schedule delay in milliseconds. The default value is 200 ms. -{cfgcmd}`initial-holdtime` sets the minimum hold time between two -consecutive SPF calculations. The default value is 1000 ms. -{cfgcmd}`max-holdtime` sets the maximum wait time between two -consecutive SPF calculations. The default value is 10000 ms. -``` - - -```{cfgcmd} set protocols ospf ldp-sync - -This command will enable IGP-LDP synchronization globally for OSPF. This -requires for LDP to be functional. This is described in {rfc}`5443`. By -default all interfaces operational in OSPF are enabled for synchronization. -Loopbacks are exempt. -``` - - -```{cfgcmd} set protocols ospf ldp-sync holddown \ - -This command will change the hold down value globally for IGP-LDP -synchronization during convergence/interface flap events. -``` - - -```{cfgcmd} set protocols ospf capability opaque - -ospfd supports Opaque LSA {rfc}`2370` as partial support for MPLS Traffic -Engineering LSAs. The opaque-lsa capability must be enabled in the -configuration. - -An alternate command could be "mpls-te on" (Traffic Engineering) - -:::{note} -FRR offers only partial support for some of the routing -protocol extensions that are used with MPLS-TE; it does not -support a complete RSVP-TE solution. -::: -``` - -#### Area Configuration - -```{cfgcmd} set protocols ospf area \ area-type stub - -This command specifies the area to be a Stub Area. That is, an area where -no router originates routes external to OSPF and hence an area where all -external routes are via the ABR(s). Hence, ABRs for such an area do not -need to pass AS-External LSAs (type-5) or ASBR-Summary LSAs (type-4) into -the area. They need only pass Network-Summary (type-3) LSAs into such an -area, along with a default-route summary. -``` - - -```{cfgcmd} set protocols ospf area \ area-type stub no-summary - -This command specifies the area to be a Totally Stub Area. In addition to -stub area limitations this area type prevents an ABR from injecting -Network-Summary (type-3) LSAs into the specified stub area. Only default -summary route is allowed. -``` - - -```{cfgcmd} set protocols ospf area \ area-type stub default-cost \ - -This command sets the cost of default-summary LSAs announced to stubby -areas. The cost range is 0 to 16777215. -``` - - -```{cfgcmd} set protocols ospf area \ area-type nssa - -This command specifies the area to be a Not So Stubby Area. External -routing information is imported into an NSSA in Type-7 LSAs. Type-7 LSAs -are similar to Type-5 AS-external LSAs, except that they can only be -flooded into the NSSA. In order to further propagate the NSSA external -information, the Type-7 LSA must be translated to a Type-5 AS-external-LSA -by the NSSA ABR. -``` - - -```{cfgcmd} set protocols ospf area \ area-type nssa no-summary - -This command specifies the area to be a NSSA Totally Stub Area. ABRs for -such an area do not need to pass Network-Summary (type-3) LSAs (except the -default summary route), ASBR-Summary LSAs (type-4) and AS-External LSAs -(type-5) into the area. But Type-7 LSAs that convert to Type-5 at the NSSA -ABR are allowed. -``` - - -```{cfgcmd} set protocols ospf area \ area-type nssa default-cost \ - -This command sets the default cost of LSAs announced to NSSA areas. -The cost range is 0 to 16777215. -``` - - -```{cfgcmd} set protocols ospf area \ area-type nssa translate \ - -Specifies whether this NSSA border router will unconditionally translate -Type-7 LSAs into Type-5 LSAs. When role is Always, Type-7 LSAs are -translated into Type-5 LSAs regardless of the translator state of other -NSSA border routers. When role is Candidate, this router participates in -the translator election to determine if it will perform the translations -duties. When role is Never, this router will never translate Type-7 LSAs -into Type-5 LSAs. -``` - - -```{cfgcmd} set protocols ospf area \ authentication plaintext-password - -This command specifies that simple password authentication should be used -for the given area. The password must also be configured on a per-interface -basis. -``` - - -```{cfgcmd} set protocols ospf area \ authentication md5 - -This command specify that OSPF packets must be authenticated with MD5 HMACs -within the given area. Keying material must also be configured on a -per-interface basis. -``` - - -```{cfgcmd} set protocols ospf area \ range \ [cost \] - -This command summarizes intra area paths from specified area into one -summary-LSA (Type-3) announced to other areas. This command can be used -only in ABR and ONLY router-LSAs (Type-1) and network-LSAs (Type-2) -(i.e. LSAs with scope area) can be summarized. AS-external-LSAs (Type-5) -can’t be summarized - their scope is AS. The optional argument -{cfgcmd}`cost` specifies the aggregated link metric. The metric range is 0 -to 16777215. -``` - - -```{cfgcmd} set protocols ospf area \ range \ not-advertise - -This command instead of summarizing intra area paths filter them - i.e. -intra area paths from this range are not advertised into other areas. -This command makes sense in ABR only. -``` - - -```{cfgcmd} set protocols ospf area \ export-list \ - -Filter Type-3 summary-LSAs announced to other areas originated from -intra- area paths from specified area. -This command makes sense in ABR only. -``` - - -```{cfgcmd} set protocols ospf area \ import-list \ - -Same as export-list, but it applies to paths announced into specified -area as Type-3 summary-LSAs. -This command makes sense in ABR only. -``` - - -```{cfgcmd} set protocols ospf area \ range \ substitute \ - -One Type-3 summary-LSA with routing info is announced into -backbone area if defined area contains at least one intra-area network -(i.e. described with router-LSA or network-LSA) from range . -This command makes sense in ABR only. -``` - - -```{cfgcmd} set protocols ospf area \ shortcut \ - -This parameter allows to "shortcut" routes (non-backbone) for inter-area -routes. There are three modes available for routes shortcutting: - -**default** – this area will be used for shortcutting only if ABR does not -have a link to the backbone area or this link was lost. -**enable** – the area will be used for shortcutting every time the route -that goes through it is cheaper. -**disable** – this area is never used by ABR for routes shortcutting. -``` - - -```{cfgcmd} set protocols ospf area \ virtual-link \ - -Provides a backbone area coherence by virtual link establishment. - -In general, OSPF protocol requires a backbone area (area 0) to be coherent -and fully connected. I.e. any backbone area router must have a route to any -other backbone area router. Moreover, every ABR must have a link to -backbone area. However, it is not always possible to have a physical link -to a backbone area. In this case between two ABR (one of them has a link to -the backbone area) in the area (not stub area) a virtual link is organized. - -\ – area identifier through which a virtual link goes. -\ – ABR router-id with which a virtual link is established. Virtual -link must be configured on both routers. - -Formally, a virtual link looks like a point-to-point network connecting two -ABR from one area one of which physically connected to a backbone area. -This pseudo-network is considered to belong to a backbone area. -``` - -#### Interface Configuration - -```{cfgcmd} set protocols ospf interface \ area \ - - Enable ospf on an interface and set associated area. - - If you have a lot of interfaces, and/or a lot of subnets, then enabling - OSPF via this command may result in a slight performance improvement. -``` - - -```{cfgcmd} set protocols ospf interface \ authentication plaintext-password \ - -This command sets OSPF authentication key to a simple password. After -setting, all OSPF packets are authenticated. Key has length up to 8 chars. - -Simple text password authentication is insecure and deprecated in favour of -MD5 HMAC authentication. -``` - - -```{cfgcmd} set protocols ospf interface \ authentication md5 key-id \ md5-key \ - -This command specifys that MD5 HMAC authentication must be used on this -interface. It sets OSPF authentication key to a cryptographic password. -Key-id identifies secret key used to create the message digest. This ID -is part of the protocol and must be consistent across routers on a link. -The key can be long up to 16 chars (larger strings will be truncated), -and is associated with the given key-id. -``` - - -```{cfgcmd} set protocols ospf interface \ bandwidth \ - -This command sets the interface bandwidth for cost calculations, where -bandwidth can be in range from 1 to 100000, specified in Mbits/s. -``` - - -```{cfgcmd} set protocols ospf interface \ cost \ - -This command sets link cost for the specified interface. The cost value is -set to router-LSA’s metric field and used for SPF calculation. The cost -range is 1 to 65535. -``` - - -```{cfgcmd} set protocols ospf interface \ dead-interval \ - -Set number of seconds for router Dead Interval timer value used for Wait -Timer and Inactivity Timer. This value must be the same for all routers -attached to a common network. The default value is 40 seconds. The -interval range is 1 to 65535. -``` - - -```{cfgcmd} set protocols ospf interface \ hello-multiplier \ - -The hello-multiplier specifies how many Hellos to send per second, from 1 -(every second) to 10 (every 100ms). Thus one can have 1s convergence time -for OSPF. If this form is specified, then the hello-interval advertised in -Hello packets is set to 0 and the hello-interval on received Hello packets -is not checked, thus the hello-multiplier need NOT be the same across -multiple routers on a common link. -``` - - -```{cfgcmd} set protocols ospf interface \ hello-interval \ - -Set number of seconds for Hello Interval timer value. Setting this value, -Hello packet will be sent every timer value seconds on the specified -interface. This value must be the same for all routers attached to a -common network. The default value is 10 seconds. The interval range is 1 -to 65535. -``` - - -```{cfgcmd} set protocols ospf interface \ bfd - -This command enables {abbr}`BFD (Bidirectional Forwarding Detection)` on -this OSPF link interface. -``` - - -```{cfgcmd} set protocols ospf interface \ mtu-ignore - -This command disables check of the MTU value in the OSPF DBD packets. Thus, -use of this command allows the OSPF adjacency to reach the FULL state even -though there is an interface MTU mismatch between two OSPF routers. -``` - - -```{cfgcmd} set protocols ospf interface \ network \ - -This command allows to specify the distribution type for the network -connected to this interface: - -**broadcast** – broadcast IP addresses distribution. -**non-broadcast** – address distribution in NBMA networks topology. -**point-to-multipoint** – address distribution in point-to-multipoint -networks. -**point-to-point** – address distribution in point-to-point networks. -``` - - -```{cfgcmd} set protocols ospf interface \ priority \ - -This command sets Router Priority integer value. The router with the -highest priority will be more eligible to become Designated Router. -Setting the value to 0, makes the router ineligible to become -Designated Router. The default value is 1. The interval range is 0 to 255. -``` - - -```{cfgcmd} set protocols ospf interface \ retransmit-interval \ - -This command sets number of seconds for RxmtInterval timer value. This -value is used when retransmitting Database Description and Link State -Request packets if acknowledge was not received. The default value is 5 -seconds. The interval range is 3 to 65535. -``` - - -```{cfgcmd} set protocols ospf interface \ transmit-delay \ - -This command sets number of seconds for InfTransDelay value. It allows to -set and adjust for each interface the delay interval before starting the -synchronizing process of the router's database with all neighbors. The -default value is 1 seconds. The interval range is 3 to 65535. -``` - - -```{cfgcmd} set protocols ospf interface \ ldp-sync disable - -This command disables IGP-LDP sync for this specific interface. -``` - - -```{cfgcmd} set protocols ospf interface \ ldp-sync holddown \ - -This command will change the hold down value for IGP-LDP synchronization -during convergence/interface flap events, but for this interface only. -``` - -#### External Route Summarisation - - -This feature summarises originated external LSAs (Type-5 and Type-7). Summary -Route will be originated on-behalf of all matched external LSAs. - -```{cfgcmd} set protocols ospf aggregation timer \ - -Configure aggregation delay timer interval. - -Summarisation starts only after this delay timer expiry. -``` - - -```{cfgcmd} set protocols ospf summary-address x.x.x.x/y [tag (1-4294967295)] - -This command enable/disables summarisation for the configured address range. - -Tag is the optional parameter. If tag configured Summary route will be -originated with the configured tag. -``` - - -```{cfgcmd} set protocols ospf summary-address x.x.x.x/y no-advertise - -This command to ensure not advertise the summary lsa for the matched -external LSAs. -``` - -#### Graceful Restart - -```{cfgcmd} set protocols ospf graceful-restart [grace-period (1-1800)] - -Configure Graceful Restart {rfc}`3623` restarting support. When enabled, -the default grace period is 120 seconds. - -To perform a graceful shutdown, the FRR ``graceful-restart prepare ip -ospf`` EXEC-level command needs to be issued before restarting the -ospfd daemon. -``` - - -```{cfgcmd} set protocols ospf graceful-restart helper enable [router-id A.B.C.D] - -Configure Graceful Restart {rfc}`3623` helper support. By default, helper support -is disabled for all neighbours. This config enables/disables helper support -on this router for all neighbours. - -To enable/disable helper support for a specific neighbour, the router-id -(A.B.C.D) has to be specified. -``` - - -```{cfgcmd} set protocols ospf graceful-restart helper no-strict-lsa-checking - -By default strict-lsa-checking is configured then the helper will abort -the Graceful Restart when a LSA change occurs which affects the restarting -router. - -This command disables it. -``` - - -```{cfgcmd} set protocols ospf graceful-restart helper supported-grace-time - -Supports as HELPER for configured grace period. -``` - - -```{cfgcmd} set protocols ospf graceful-restart helper planned-only - -It helps to support as HELPER only for planned restarts. - -By default, it supports both planned and unplanned outages. -``` - -#### Manual Neighbor Configuration - - -OSPF routing devices normally discover their neighbors dynamically by -listening to the broadcast or multicast hello packets on the network. -Because an NBMA network does not support broadcast (or multicast), the -device cannot discover its neighbors dynamically, so you must configure all -the neighbors statically. - -```{cfgcmd} set protocols ospf neighbor \ - -This command specifies the IP address of the neighboring device. -``` - - -```{cfgcmd} set protocols ospf neighbor \ poll-interval \ - -This command specifies the length of time, in seconds, before the routing -device sends hello packets out of the interface before it establishes -adjacency with a neighbor. The range is 1 to 65535 seconds. The default -value is 60 seconds. -``` - - -```{cfgcmd} set protocols ospf neighbor \ priority \ - -This command specifies the router priority value of the nonbroadcast -neighbor associated with the IP address specified. The default is 0. -This keyword does not apply to point-to-multipoint interfaces. -``` - -#### Redistribution Configuration - -```{cfgcmd} set protocols ospf redistribute \ - - This command redistributes routing information from the given route source - to the OSPF process. There are five modes available for route source: bgp, - connected, kernel, rip, static. -``` - - -```{cfgcmd} set protocols ospf default-metric \ - -This command specifies the default metric value of redistributed routes. -The metric range is 0 to 16777214. -``` - - -```{cfgcmd} set protocols ospf redistribute \ metric \ - -This command specifies metric for redistributed routes from the given -route source. There are five modes available for route source: bgp, -connected, kernel, rip, static. The metric range is 1 to 16777214. -``` - - -```{cfgcmd} set protocols ospf redistribute \ metric-type \<1|2\> - -This command specifies metric type for redistributed routes. Difference -between two metric types that metric type 1 is a metric which is -"commensurable" with inner OSPF links. When calculating a metric to the -external destination, the full path metric is calculated as a metric sum -path of a router which had advertised this link plus the link metric. -Thus, a route with the least summary metric will be selected. If external -link is advertised with metric type 2 the path is selected which lies -through the router which advertised this link with the least metric -despite of the fact that internal path to this router is longer (with more -cost). However, if two routers advertised an external link and with metric -type 2 the preference is given to the path which lies through the router -with a shorter internal path. If two different routers advertised two -links to the same external destimation but with different metric type, -metric type 1 is preferred. If type of a metric left undefined the router -will consider these external links to have a default metric type 2. -``` - - -```{cfgcmd} set protocols ospf redistribute \ route-map \ - -This command allows to use route map to filter redistributed routes from -the given route source. There are five modes available for route source: -bgp, connected, kernel, rip, static. -``` - -#### Operational Mode Commands - -```{opcmd} show ip ospf neighbor - - This command displays the neighbors status. -``` - - -```none -Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL -10.0.13.1 1 Full/DR 38.365s 10.0.13.1 eth0:10.0.13.3 0 0 0 -10.0.23.2 1 Full/Backup 39.175s 10.0.23.2 eth1:10.0.23.3 0 0 0 -``` - - -```{opcmd} show ip ospf neighbor detail - -This command displays the neighbors information in a detailed form, not -just a summary table. -``` - - -```none - Neighbor 10.0.13.1, interface address 10.0.13.1 - - In the area 0.0.0.0 via interface eth0 - - Neighbor priority is 1, State is Full, 5 state changes - - Most recent state change statistics: - - Progressive change 11m55s ago - - DR is 10.0.13.1, BDR is 10.0.13.3 - - Options 2 *|-|-|-|-|-|E|- - - Dead timer due in 34.854s - - Database Summary List 0 - - Link State Request List 0 - - Link State Retransmission List 0 - - Thread Inactivity Timer on - - Thread Database Description Retransmision off - - Thread Link State Request Retransmission on - - Thread Link State Update Retransmission on - - -Neighbor 10.0.23.2, interface address 10.0.23.2 - - In the area 0.0.0.1 via interface eth1 - - Neighbor priority is 1, State is Full, 4 state changes - - Most recent state change statistics: - - Progressive change 41.193s ago - - DR is 10.0.23.3, BDR is 10.0.23.2 - - Options 2 *|-|-|-|-|-|E|- - - Dead timer due in 35.661s - - Database Summary List 0 - - Link State Request List 0 - - Link State Retransmission List 0 - - Thread Inactivity Timer on - - Thread Database Description Retransmision off - - Thread Link State Request Retransmission on - - Thread Link State Update Retransmission on -``` - - -```{opcmd} show ip ospf neighbor \ - -This command displays the neighbors information in a detailed form for a -neighbor whose IP address is specified. -``` - - -```{opcmd} show ip ospf neighbor \ - -This command displays the neighbors status for a neighbor on the specified -interface. -``` - - -```{opcmd} show ip ospf interface [\] - -This command displays state and configuration of OSPF the specified -interface, or all interfaces if no interface is given. -``` - - -```none -eth0 is up - ifindex 2, MTU 1500 bytes, BW 4294967295 Mbit - Internet Address 10.0.13.3/24, Broadcast 10.0.13.255, Area 0.0.0.0 - MTU mismatch detection: enabled - Router ID 10.0.23.3, Network Type BROADCAST, Cost: 1 - Transmit Delay is 1 sec, State Backup, Priority 1 - Backup Designated Router (ID) 10.0.23.3, Interface Address 10.0.13.3 - Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters - Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5 - Hello due in 4.470s - Neighbor Count is 1, Adjacent neighbor count is 1 -eth1 is up - ifindex 3, MTU 1500 bytes, BW 4294967295 Mbit - Internet Address 10.0.23.3/24, Broadcast 10.0.23.255, Area 0.0.0.1 - MTU mismatch detection: enabled - Router ID 10.0.23.3, Network Type BROADCAST, Cost: 1 - Transmit Delay is 1 sec, State DR, Priority 1 - Backup Designated Router (ID) 10.0.23.2, Interface Address 10.0.23.2 - Saved Network-LSA sequence number 0x80000002 - Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters - Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5 - Hello due in 4.563s - Neighbor Count is 1, Adjacent neighbor count is 1 -``` - - -```{opcmd} show ip ospf route [detail] - -This command displays the OSPF routing table, as determined by the most -recent SPF calculation. With the optional {cfgcmd}`detail` argument, -each route item's advertiser router and network attribute will be shown. -``` - - -```none -============ OSPF network routing table ============ -N IA 10.0.12.0/24 [3] area: 0.0.0.0 - via 10.0.13.3, eth0 -N 10.0.13.0/24 [1] area: 0.0.0.0 - directly attached to eth0 -N IA 10.0.23.0/24 [2] area: 0.0.0.0 - via 10.0.13.3, eth0 -N 10.0.34.0/24 [2] area: 0.0.0.0 - via 10.0.13.3, eth0 - -============ OSPF router routing table ============= -R 10.0.23.3 [1] area: 0.0.0.0, ABR - via 10.0.13.3, eth0 -R 10.0.34.4 [2] area: 0.0.0.0, ASBR - via 10.0.13.3, eth0 - -============ OSPF external routing table =========== -N E2 172.16.0.0/24 [2/20] tag: 0 - via 10.0.13.3, eth0 -``` - -The table consists of following data: - - -**OSPF network routing table** – includes a list of acquired routes for all -accessible networks (or aggregated area ranges) of OSPF system. "IA" flag -means that route destination is in the area to which the router is not -connected, i.e. it’s an inter-area path. In square brackets a summary metric -for all links through which a path lies to this network is specified. "via" -prefix defines a router-gateway, i.e. the first router on the way to the -destination (next hop). -**OSPF router routing table** – includes a list of acquired routes to all -accessible ABRs and ASBRs. -**OSPF external routing table** – includes a list of acquired routes that are -external to the OSPF process. "E" flag points to the external link metric type -(E1 – metric type 1, E2 – metric type 2). External link metric is printed in -the "\/\" format. - -```{opcmd} show ip ospf border-routers - -This command displays a table of paths to area boundary and autonomous -system boundary routers. -``` - - -```{opcmd} show ip ospf database - -This command displays a summary table with a database contents (LSA). -``` - - -```none - OSPF Router with ID (10.0.13.1) - - Router Link States (Area 0.0.0.0) - -Link ID ADV Router Age Seq# CkSum Link count -10.0.13.1 10.0.13.1 984 0x80000005 0xd915 1 -10.0.23.3 10.0.23.3 1186 0x80000008 0xfe62 2 -10.0.34.4 10.0.34.4 1063 0x80000004 0x4e3f 1 - - Net Link States (Area 0.0.0.0) - -Link ID ADV Router Age Seq# CkSum -10.0.13.1 10.0.13.1 994 0x80000003 0x30bb -10.0.34.4 10.0.34.4 1188 0x80000001 0x9411 - - Summary Link States (Area 0.0.0.0) - -Link ID ADV Router Age Seq# CkSum Route -10.0.12.0 10.0.23.3 1608 0x80000001 0x6ab6 10.0.12.0/24 -10.0.23.0 10.0.23.3 981 0x80000003 0xe232 10.0.23.0/24 - - AS External Link States - -Link ID ADV Router Age Seq# CkSum Route -172.16.0.0 10.0.34.4 1063 0x80000001 0xc40d E2 172.16.0.0/24 [0x0] -``` - - -```{opcmd} show ip ospf database \ [A.B.C.D] [adv-router \|self-originate] - - This command displays a database contents for a specific link advertisement - type. - - The type can be the following: - asbr-summary, external, network, nssa-external, opaque-area, opaque-as, - opaque-link, router, summary. - - [A.B.C.D] – link-state-id. With this specified the command displays portion - of the network environment that is being described by the advertisement. - The value entered depends on the advertisement’s LS type. It must be - entered in the form of an IP address. - - {cfgcmd}`adv-router ` – router id, which link advertisements need - to be reviewed. - - {cfgcmd}`self-originate` displays only self-originated LSAs from the local - router. -``` - - -```none - OSPF Router with ID (10.0.13.1) - - Router Link States (Area 0.0.0.0) - -LS age: 1213 -Options: 0x2 : *|-|-|-|-|-|E|- -LS Flags: 0x3 -Flags: 0x0 -LS Type: router-LSA -Link State ID: 10.0.13.1 -Advertising Router: 10.0.13.1 -LS Seq Number: 80000009 -Checksum: 0xd119 -Length: 36 - - Number of Links: 1 - - Link connected to: a Transit Network - (Link ID) Designated Router address: 10.0.13.1 - (Link Data) Router Interface address: 10.0.13.1 - Number of TOS metrics: 0 - TOS 0 Metric: 1 -``` - - -```{opcmd} show ip ospf database max-age - -This command displays LSAs in MaxAge list. -``` - -#### Examples -### Enable OSPF - -**Node 1** - -```none -set interfaces loopback lo address 10.1.1.1/32 -set interfaces ethernet eth0 address 192.168.0.1/24 -set protocols ospf area 0 network 192.168.0.0/24 -set protocols ospf area 0 network 10.1.1.1/32 -set protocols ospf parameters router-id 10.1.1.1 -``` - -**Node 2** - -```none -set interfaces loopback lo address 10.1.1.2/32 -set interfaces ethernet eth0 address 192.168.0.2/24 -set protocols ospf area 0 network 192.168.0.0/24 -set protocols ospf area 0 network 10.1.1.2/32 -set protocols ospf parameters router-id 10.1.1.2 -``` - -Here's the neighbors up: - -```none -Node-1@vyos:~$ show ip ospf neighbor - -Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL -10.1.1.2 1 Full/DR 3m43s 36.094s 192.168.0.2 eth0:192.168.0.1 0 0 0 - - -Node-2@vyos:~$ show ip ospf neighbor - -Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL -10.1.1.1 1 Full/Backup 3m47s 31.736s 192.168.0.1 eth0:192.168.0.2 0 0 0 -``` - -Here's the routes: - -```none -Node-1@vyos:~$ show ip route ospf -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -O 10.1.1.1/32 [110/0] is directly connected, lo, weight 1, 00:00:14 -O>* 10.1.1.2/32 [110/1] via 192.168.0.2, eth0, weight 1, 00:00:07 -O 192.168.0.0/24 [110/1] is directly connected, eth0, weight 1, 00:03:32 - -Node-2@vyos:~$ show ip route ospf -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -O>* 10.1.1.1/32 [110/1] via 192.168.0.1, eth0, weight 1, 00:00:11 -O 10.1.1.2/32 [110/0] is directly connected, lo, weight 1, 00:00:04 -O 192.168.0.0/24 [110/1] is directly connected, eth0, weight 1, 00:03:18 -``` - -### Enable OSPF with route redistribution of the loopback and default originate: - -**Node 1** - -```none -set interfaces loopback lo address 10.1.1.1/32 -set protocols ospf area 0 network 192.168.0.0/24 -set protocols ospf default-information originate always -set protocols ospf default-information originate metric 10 -set protocols ospf default-information originate metric-type 2 -set protocols ospf log-adjacency-changes -set protocols ospf parameters router-id 10.1.1.1 -set protocols ospf redistribute connected metric-type 2 -set protocols ospf redistribute connected route-map CONNECT - -set policy route-map CONNECT rule 10 action permit -set policy route-map CONNECT rule 10 match interface lo -``` - -**Node 2** - -```none -set interfaces loopback lo address 10.2.2.2/32 -set protocols ospf area 0 network 192.168.0.0/24 -set protocols ospf log-adjacency-changes -set protocols ospf parameters router-id 10.2.2.2 -set protocols ospf redistribute connected metric-type 2 -set protocols ospf redistribute connected route-map CONNECT - -set policy route-map CONNECT rule 10 action permit -set policy route-map CONNECT rule 10 match interface lo -``` - -### Enable OSPF and IGP-LDP synchronization: - -**Node 1:** - -```none -set interfaces loopback lo address 10.1.1.1/32 -set interfaces ethernet eth0 address 192.168.0.1/24 - -set protocols ospf area 0 network '192.168.0.0/24' -set protocols ospf area 0 network '10.1.1.1/32' -set protocols ospf parameters router-id '10.1.1.1' -set protocols ospf ldp-sync - -set protocols mpls interface eth0 -set protocols mpls ldp discovery transport-ipv4-address 10.1.1.1 -set protocols mpls ldp interface lo -set protocols mpls ldp interface eth0 -set protocols mpls ldp parameters transport-prefer-ipv4 -set protocols mpls ldp router-id 10.1.1.1 -``` - -This gives us IGP-LDP synchronization for all non-loopback interfaces with -a holddown timer of zero seconds: - -```none -Node-1@vyos:~$ show ip ospf mpls ldp-sync - eth0 - LDP-IGP Synchronization enabled: yes - Holddown timer in seconds: 0 - State: Sync achieved -``` - -### Enable OSPF with Segment Routing (Experimental): - -**Node 1** - -```none -set interfaces loopback lo address 10.1.1.1/32 -set interfaces ethernet eth0 address 192.168.0.1/24 - -set protocols ospf area 0 network '192.168.0.0/24' -set protocols ospf area 0 network '10.1.1.1/32' -set protocols ospf parameters opaque-lsa -set protocols ospf parameters router-id '10.1.1.1' -set protocols ospf segment-routing global-block high-label-value '1100' -set protocols ospf segment-routing global-block low-label-value '1000' -set protocols ospf segment-routing prefix 10.1.1.1/32 index explicit-null -set protocols ospf segment-routing prefix 10.1.1.1/32 index value '1' -``` - -**Node 2** - -```none -set interfaces loopback lo address 10.1.1.2/32 -set interfaces ethernet eth0 address 192.168.0.2/24 - -set protocols ospf area 0 network '192.168.0.0/24' -set protocols ospf area 0 network '10.1.1.2/32' -set protocols ospf parameters opaque-lsa -set protocols ospf parameters router-id '10.1.1.2' -set protocols ospf segment-routing global-block high-label-value '1100' -set protocols ospf segment-routing global-block low-label-value '1000' -set protocols ospf segment-routing prefix 10.1.1.2/32 index explicit-null -set protocols ospf segment-routing prefix 10.1.1.2/32 index value '2' -``` - -This gives us MPLS segment routing enabled and labels for far end loopbacks: - -```none -Node-1@vyos:~$ show mpls table - Inbound Label Type Nexthop Outbound Label - ----------------------------------------------------------- - 1002 SR (OSPF) 192.168.0.2 IPv4 Explicit Null <-- Node-2 loopback learned on Node-1 - 15000 SR (OSPF) 192.168.0.2 implicit-null - 15001 SR (OSPF) 192.168.0.2 implicit-null - -Node-2@vyos:~$ show mpls table - Inbound Label Type Nexthop Outbound Label - ----------------------------------------------------------- - 1001 SR (OSPF) 192.168.0.1 IPv4 Explicit Null <-- Node-1 loopback learned on Node-2 - 15000 SR (OSPF) 192.168.0.1 implicit-null - 15001 SR (OSPF) 192.168.0.1 implicit-null -``` - -Here is the routing tables showing the MPLS segment routing label operations: - -```none -Node-1@vyos:~$ show ip route ospf -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -O 10.1.1.1/32 [110/0] is directly connected, lo, weight 1, 00:03:43 -O>* 10.1.1.2/32 [110/1] via 192.168.0.2, eth0, label IPv4 Explicit Null, weight 1, 00:03:32 -O 192.168.0.0/24 [110/1] is directly connected, eth0, weight 1, 00:03:43 - -Node-2@vyos:~$ show ip route ospf -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -O>* 10.1.1.1/32 [110/1] via 192.168.0.1, eth0, label IPv4 Explicit Null, weight 1, 00:03:36 -O 10.1.1.2/32 [110/0] is directly connected, lo, weight 1, 00:03:51 -O 192.168.0.0/24 [110/1] is directly connected, eth0, weight 1, 00:03:51 -``` - -(routing-ospfv3)= - -## OSPFv3 (IPv6) - -(ospf-v3-configuration)= - -### Configuration - -(ospf-v3-general)= - -#### General - -VyOS does not have a special command to start the OSPFv3 process. The OSPFv3 -process starts when the first ospf enabled interface is configured. - -```{cfgcmd} set protocols ospfv3 interface \ area \ - - This command specifies the OSPFv3 enabled interface. This command is also - used to enable the OSPF process. The area number can be specified in - decimal notation in the range from 0 to 4294967295. Or it can be specified - in dotted decimal notation similar to ip address. -``` - - -```{cfgcmd} set protocols ospfv3 parameters router-id \ - -This command sets the router-ID of the OSPFv3 process. The router-ID may be -an IP address of the router, but need not be – it can be any arbitrary -32bit number. However it MUST be unique within the entire OSPFv3 domain to -the OSPFv3 speaker – bad things will happen if multiple OSPFv3 speakers are -configured with the same router-ID! -``` - -(ospf-v3-optional)= - -#### Optional - -```{cfgcmd} set protocols ospfv3 distance global \ - -This command change distance value of OSPFv3 globally. -The distance range is 1 to 255. -``` -```{cfgcmd} set protocols ospfv3 distance ospfv3 \ \ - -This command change distance value of OSPFv3. The arguments are the -distance values for external routes, inter-area routes and intra-area -routes respectively. The distance range is 1 to 255. -``` - -(ospf-v3-area-configuration)= - -#### Area Configuration - -```{cfgcmd} set protocols ospfv3 area \ range \ - -This command summarizes intra area paths from specified area into one -Type-3 Inter-Area Prefix LSA announced to other areas. This command can be -used only in ABR. -``` -```{cfgcmd} set protocols ospfv3 area \ range \ not-advertise - -This command instead of summarizing intra area paths filter them - i.e. -intra area paths from this range are not advertised into other areas. This -command makes sense in ABR only. -``` - -(ospf-v3-interface-config)= - -#### Interface Configuration - -```{cfgcmd} set protocols ospfv3 interface \ ipv6 cost \ - -This command sets link cost for the specified interface. The cost value is -set to router-LSA’s metric field and used for SPF calculation. The cost -range is 1 to 65535. -``` -```{cfgcmd} set protocols ospfv3 interface \ dead-interval \ - -Set number of seconds for router Dead Interval timer value used for Wait -Timer and Inactivity Timer. This value must be the same for all routers -attached to a common network. The default value is 40 seconds. The -interval range is 1 to 65535. -``` -```{cfgcmd} set protocols ospfv3 interface \ hello-interval \ - -Set number of seconds for Hello Interval timer value. Setting this value, -Hello packet will be sent every timer value seconds on the specified -interface. This value must be the same for all routers attached to a -common network. The default value is 10 seconds. The interval range is 1 -to 65535. -``` -```{cfgcmd} set protocols ospfv3 interface \ mtu-ignore - -This command disables check of the MTU value in the OSPF DBD packets. -Thus, use of this command allows the OSPF adjacency to reach the FULL -state even though there is an interface MTU mismatch between two OSPF -routers. -``` -```{cfgcmd} set protocols ospfv3 interface \ network \ - -This command allows to specify the distribution type for the network -connected to this interface: - -**broadcast** – broadcast IP addresses distribution. -**point-to-point** – address distribution in point-to-point networks. -``` -```{cfgcmd} set protocols ospfv3 interface \ priority \ - -This command sets Router Priority integer value. The router with the -highest priority will be more eligible to become Designated Router. -Setting the value to 0, makes the router ineligible to become Designated -Router. The default value is 1. The interval range is 0 to 255. -``` -```{cfgcmd} set protocols ospfv3 interface \ passive - -This command specifies interface as passive. Passive interface advertises -its address, but does not run the OSPF protocol (adjacencies are not formed -and hello packets are not generated). -``` -```{cfgcmd} set protocols ospfv3 interface \ retransmit-interval \ - -This command sets number of seconds for RxmtInterval timer value. This -value is used when retransmitting Database Description and Link State -Request packets if acknowledge was not received. The default value is 5 -seconds. The interval range is 3 to 65535. -``` -```{cfgcmd} set protocols ospfv3 interface \ transmit-delay \ - -This command sets number of seconds for InfTransDelay value. It allows to -set and adjust for each interface the delay interval before starting the -synchronizing process of the router's database with all neighbors. The -default value is 1 seconds. The interval range is 3 to 65535. -``` - -(ospf-v3-graceful-restart)= - -#### Graceful Restart - -```{cfgcmd} set protocols ospfv3 graceful-restart [grace-period (1-1800)] - -Configure Graceful Restart {rfc}`3623` restarting support. When enabled, -the default grace period is 120 seconds. - -To perform a graceful shutdown, the FRR ``graceful-restart prepare ip -ospf`` EXEC-level command needs to be issued before restarting the -ospfd daemon. -``` -```{cfgcmd} set protocols ospfv3 graceful-restart helper enable [router-id A.B.C.D] - -Configure Graceful Restart {rfc}`3623` helper support. By default, helper support -is disabled for all neighbours. This config enables/disables helper support -on this router for all neighbours. - -To enable/disable helper support for a specific neighbour, the router-id -(A.B.C.D) has to be specified. -``` -```{cfgcmd} set protocols ospfv3 graceful-restart helper lsa-check-disable - -By default strict-lsa-checking is configured then the helper will abort -the Graceful Restart when a LSA change occurs which affects the restarting -router. - -This command disables it. -``` -```{cfgcmd} set protocols ospfv3 graceful-restart helper supported-grace-time - -Supports as HELPER for configured grace period. -``` -```{cfgcmd} set protocols ospfv3 graceful-restart helper planned-only - -It helps to support as HELPER only for planned restarts. -By default, it supports both planned and unplanned outages. -``` - -(ospf-v3-redistribution-config)= - -#### Redistribution Configuration - -```{cfgcmd} set protocols ospfv3 redistribute \ - -This command redistributes routing information from the given route source -to the OSPFv3 process. There are five modes available for route source: -bgp, connected, kernel, ripng, static. -``` -```{cfgcmd} set protocols ospf redistribute \ route-map \ - -This command allows to use route map to filter redistributed routes from -given route source. There are five modes available for route source: bgp, -connected, kernel, ripng, static. -``` - -(ospf-v3-op-cmd)= - -#### Operational Mode Commands - -```{opcmd} show ipv6 ospfv3 neighbor - -This command displays the neighbors status. -``` -```{opcmd} show ipv6 ospfv3 neighbor detail - -This command displays the neighbors information in a detailed form, not -just a summary table. -``` -```{opcmd} show ipv6 ospfv3 neighbor drchoice - -This command displays the neighbor DR choice information. -``` -```{opcmd} show ipv6 ospfv3 interface [prefix]|[\ [prefix]] - -This command displays state and configuration of OSPF the specified -interface, or all interfaces if no interface is given. Whith the argument -{cfgcmd}`prefix` this command shows connected prefixes to advertise. -``` -```{opcmd} show ipv6 ospfv3 route - -This command displays the OSPF routing table, as determined by the most -recent SPF calculation. -``` -```{opcmd} show ipv6 ospfv3 border-routers - -This command displays a table of paths to area boundary and autonomous -system boundary routers. -``` -```{opcmd} show ipv6 ospfv3 database - -This command displays a summary table with a database contents (LSA). -``` -```{opcmd} show ipv6 ospfv3 database \ [A.B.C.D] [adv-router \|self-originate] - -This command displays a database contents for a specific link -advertisement type. -``` -```{opcmd} show ipv6 ospfv3 redistribute - -This command displays external information redistributed into OSPFv3 -``` - -(ospf-v3-config-example)= - -#### Configuration Example - -A typical configuration using 2 nodes. - -**Node 1:** - -```none -set protocols ospfv3 interface eth1 area 0.0.0.0 -set protocols ospfv3 area 0.0.0.0 range 2001:db8:1::/64 -set protocols ospfv3 parameters router-id 192.168.1.1 -set protocols ospfv3 redistribute connected -``` - -**Node 2:** - -```none -set protocols ospfv3 interface eth1 area 0.0.0.0 -set protocols ospfv3 area 0.0.0.0 range 2001:db8:2::/64 -set protocols ospfv3 parameters router-id 192.168.2.1 -set protocols ospfv3 redistribute connected -``` - -**To see the redistributed routes:** - -```none -show ipv6 ospfv3 redistribute -``` - -Cost calculation wireguard interfaces is unreliable as ospfv3 uses the link speed to calculate the link cost. -You might therefore want to set the link cost to a fixed value on WireGuard tunnels. - -Example configuration for WireGuard interfaces: - -**Node 1** - -```none -set interfaces wireguard wg01 peer ospf02 allowed-ips '::/0' -set interfaces wireguard wg01 peer ospf02 endpoint '10.1.1.101:12345' -set interfaces wireguard wg01 peer ospf02 pubkey 'ie3...=' -set interfaces wireguard wg01 port '12345' -set protocols ospfv3 parameters router-id 192.168.1.1 -set protocols ospfv3 interface 'wg01' area 0.0.0.0 -set protocols ospfv3 interface 'wg01' cost 10 -set protocols ospfv3 interface 'lo' area 0.0.0.0 -``` - -**Node 2** - -```none -set interfaces wireguard wg01 peer ospf01 allowed-ips '::/0' -set interfaces wireguard wg01 peer ospf01 endpoint '10.1.1.100:12345' -set interfaces wireguard wg01 peer ospf01 pubkey 'NHI...=' -set interfaces wireguard wg01 port '12345' -set protocols ospfv3 parameters router-id 192.168.1.2 -set protocols ospfv3 interface 'wg01' area 0.0.0.0 -set protocols ospfv3 interface 'wg01' cost 10 -set protocols ospfv3 interface 'lo' area 0.0.0.0 -``` - -**Status** - -```none -vyos@ospf01:~$ sh ipv6 ospfv3 neighbor -Neighbor ID Pri DeadTime State/IfState Duration I/F[State] -192.168.0.2 1 00:00:37 Full/PointToPoint 00:18:03 wg01[PointToPoint] - -vyos@ospf02# run sh ipv6 ospfv3 neighbor -Neighbor ID Pri DeadTime State/IfState Duration I/F[State] -192.168.0.1 1 00:00:39 Full/PointToPoint 00:19:44 wg01[PointToPoint] -``` diff --git a/docs/configuration/protocols/pim.md b/docs/configuration/protocols/pim.md deleted file mode 100644 index db8c9fb7..00000000 --- a/docs/configuration/protocols/pim.md +++ /dev/null @@ -1,282 +0,0 @@ ---- -lastproofread: '2023-11-13' ---- - -(pim)= - -# PIM – Protocol Independent Multicast - -VyOS supports {abbr}`PIM-SM (PIM Sparse Mode)` as well as -{abbr}`IGMP (Internet Group Management Protocol)` v2 and v3 - -{abbr}`PIM (Protocol Independent Multicast)` must be configured in every -interface of every participating router. Every router must also have the -location of the Rendevouz Point manually configured. Then, unidirectional -shared trees rooted at the Rendevouz Point will automatically be built -for multicast distribution. - -Traffic from multicast sources will go to the Rendezvous Point, and -receivers will pull it from a shared tree using {abbr}`IGMP (Internet -Group Management Protocol)`. - -Multicast receivers will talk IGMP to their local router, so, besides -having PIM configured in every router, IGMP must also be configured in -any router where there could be a multicast receiver locally connected. - -VyOS supports both IGMP version 2 and version 3 (which allows -source-specific multicast). - -## PIM-SM - PIM Sparse Mode - -```{cfgcmd} set protocols pim ecmp - -If PIM has the a choice of ECMP nexthops for a particular -{abbr}`RPF (Reverse Path Forwarding)`, PIM will cause S,G flows to be -spread out amongst the nexthops. If this command is not specified then -the first nexthop found will be used. -``` - -```{cfgcmd} set protocols pim ecmp rebalance - -If PIM is using ECMP and an interface goes down, cause PIM to rebalance all -S,G flows across the remaining nexthops. If this command is not configured -PIM only modifies those S,G flows that were using the interface that went -down. -``` - -```{cfgcmd} set protocols pim join-prune-interval \ - -Modify the join/prune interval that PIM uses to the new value. Time is -specified in seconds. - -The default time is 60 seconds. - -If you enter a value smaller than 60 seconds be aware that this can and -will affect convergence at scale. -``` - -```{cfgcmd} set protocols pim keep-alive-timer \ - -Modify the time out value for a S,G flow from 1-65535 seconds. If choosing -a value below 31 seconds be aware that some hardware platforms cannot see -data flowing in better than 30 second chunks. -``` - -```{cfgcmd} set protocols pim packets \ - -When processing packets from a neighbor process the number of packets -incoming at one time before moving on to the next task. - -The default value is 3 packets. - -This command is only useful at scale when you can possibly have a large -number of PIM control packets flowing. -``` - -```{cfgcmd} set protocols pim register-accept-list \ - -When PIM receives a register packet the source of the packet will be compared -to the prefix-list specified, and if a permit is received normal processing -continues. If a deny is returned for the source address of the register packet -a register stop message is sent to the source. -``` - -```{cfgcmd} set protocols pim register-suppress-time \ - -Modify the time that pim will register suppress a FHR will send register -notifications to the kernel. -``` - -```{cfgcmd} set protocols pim rp \ group \ - -In order to use PIM, it is necessary to configure a {abbr}`RP (Rendezvous Point)` -for join messages to be sent to. Currently the only methodology to do this is -via static rendezvous point commands. - -All routers in the PIM network must agree on these values. - -The first ip address is the RP's address and the second value is the matching -prefix of group ranges covered. -``` - -```{cfgcmd} set protocols pim rp keep-alive-timer \ - -Modify the time out value for a S,G flow from 1-65535 seconds at -{abbr}`RP (Rendezvous Point)`. The normal keepalive period for the KAT(S,G) -defaults to 210 seconds. However, at the {abbr}`RP (Rendezvous Point)`, the -keepalive period must be at least the Register_Suppression_Time, or the RP -may time out the (S,G) state before the next Null-Register arrives. -Thus, the KAT(S,G) is set to max(Keepalive_Period, RP_Keepalive_Period) -when a Register-Stop is sent. - -If choosing a value below 31 seconds be aware that some hardware platforms -cannot see data flowing in better than 30 second chunks. - -See {rfc}`7761#section-4.1` for details. -``` - -```{cfgcmd} set protocols pim no-v6-secondary - -When sending PIM hello packets tell PIM to not send any v6 secondary -addresses on the interface. This information is used to allow PIM to use v6 -nexthops in it's decision for {abbr}`RPF (Reverse Path Forwarding)` lookup -if this option is not set (default). -``` - -```{cfgcmd} set protocols pim spt-switchover infinity-and-beyond [prefix-list \] - -On the last hop router if it is desired to not switch over to the SPT tree -configure this command. - -Optional parameter prefix-list can be use to control which groups to switch or -not switch. If a group is PERMIT as per the prefix-list, then the SPT switchover -does not happen for it and if it is DENY, then the SPT switchover happens. -``` - -```{cfgcmd} set protocols pim ssm prefix-list \ - -Specify a range of group addresses via a prefix-list that forces PIM to never -do {abbr}`SSM (Source-Specific Multicast)` over. -``` - - -### Interface specific commands - -```{cfgcmd} set protocols pim interface \ bfd [profile \] - -Automatically create BFD session for each RIP peer discovered in this -interface. When the BFD session monitor signalize that the link is down -the RIP peer is removed and all the learned routes associated with that -peer are removed. - -If optional profile parameter is used, select a BFD profile for the BFD -sessions created via this interface. -``` - -```{cfgcmd} set protocols pim interface \ dr-priority \ - -Set the {abbr}`DR (Designated Router)` Priority for the interface. -This command is useful to allow the user to influence what node becomes -the DR for a LAN segment. -``` - -```{cfgcmd} set protocols pim interface \ hello \ - -Set the PIM hello and hold interval for a interface. -``` - -```{cfgcmd} set protocols pim interface \ no-bsm - -Tell PIM that we would not like to use this interface to process -bootstrap messages. -``` - -```{cfgcmd} set protocols pim interface \ no-unicast-bsm - -Tell PIM that we would not like to use this interface to process -unicast bootstrap messages. -``` - -```{cfgcmd} set protocols pim interface \ passive - -Disable sending and receiving PIM control packets on the interface. -``` - -```{cfgcmd} set protocols pim interface \ source-address \ - -If you have multiple addresses configured on a particular interface and would -like PIM to use a specific source address associated with that interface. -``` - - -## IGMP - Internet Group Management Protocol) - -```{cfgcmd} set protocols pim igmp watermark-warning \ - -Configure watermark warning generation for an IGMP group limit. Generates -warning once the configured group limit is reached while adding new groups. -``` - -(pim-igmp-interface-commands)= - -### Interface specific commands - -```{cfgcmd} set protocols pim interface \ igmp join \ source-address \ - -Use this command to allow the selected interface to join a multicast -group defining the multicast address you want to join and the source -IP address too. -``` - -```{cfgcmd} set protocols pim interface \ igmp query-interval \ - -Use this command to configure in the selected interface the IGMP -host query interval (1-1800) in seconds that PIM will use. -``` - -```{cfgcmd} set protocols pim interface \ igmp query-max-response-time \ - -Use this command to configure in the selected interface the IGMP -query response timeout value (10-250) in deciseconds. If a report is -not returned in the specified time, it will be assumed the (S,G) or -(\*,G) state {rfc}`7761#section-4.1` has timed out. -``` - -```{cfgcmd} set protocols pim interface \ igmp version \ - -Use this command to define in the selected interface whether you -choose IGMP version 2 or 3. - -The default value is 3. -``` - - -#### Example - -In the following example we can see a basic multicast setup: - -```{image} /_static/images/multicast-basic.webp -:align: center -:alt: Network Topology Diagram -:width: 90% -``` - -**Router 1** - -```none -set interfaces ethernet eth2 address '172.16.0.2/24' -set interfaces ethernet eth1 address '100.64.0.1/24' -set protocols ospf area 0 network '172.16.0.0/24' -set protocols ospf area 0 network '100.64.0.0/24' -set protocols igmp interface eth1 -set protocols pim interface eth1 -set protocols pim interface eth2 -set protocols pim rp address 172.16.255.1 group '224.0.0.0/4' -``` - -**Router 3** - -```none -set interfaces dummy dum0 address '172.16.255.1/24' -set interfaces ethernet eth0 address '172.16.0.1/24' -set interfaces ethernet eth1 address '172.16.1.1/24' -set protocols ospf area 0 network '172.16.0.0/24' -set protocols ospf area 0 network '172.16.255.0/24' -set protocols ospf area 0 network '172.16.1.0/24' -set protocols pim interface dum0 -set protocols pim interface eth0 -set protocols pim interface eth1 -set protocols pim rp address 172.16.255.1 group '224.0.0.0/4' -``` - -**Router 2** - -```none -set interfaces ethernet eth1 address '10.0.0.1/24' -set interfaces ethernet eth2 address '172.16.1.2/24' -set protocols ospf area 0 network '10.0.0.0/24' -set protocols ospf area 0 network '172.16.1.0/24' -set protocols pim interface eth1 -set protocols pim interface eth2 -set protocols pim rp address 172.16.255.1 group '224.0.0.0/4' -``` diff --git a/docs/configuration/protocols/pim6.md b/docs/configuration/protocols/pim6.md deleted file mode 100644 index 707ae606..00000000 --- a/docs/configuration/protocols/pim6.md +++ /dev/null @@ -1,100 +0,0 @@ -(pim6)= - -# PIM6 - Protocol Independent Multicast for IPv6 - -VyOS facilitates IPv6 Multicast by supporting **PIMv6** and **MLD**. - -PIMv6 (Protocol Independent Multicast for IPv6) must be configured in every -interface of every participating router. Every router must also have the -location of the Rendevouz Point manually configured. -Then, unidirectional shared trees rooted at the Rendevouz Point will -automatically be built for multicast distribution. - -Traffic from multicast sources will go to the Rendezvous Point, and receivers -will pull it from a shared tree using MLD (Multicast Listener Discovery). - -Multicast receivers will talk MLD to their local router, so, besides having -PIMv6 configured in every router, MLD must also be configured in any router -where there could be a multicast receiver locally connected. - -VyOS supports both MLD version 1 and version 2 -(which allows source-specific multicast). - -## Basic commands - -These are the commands for a basic setup. - -```{cfgcmd} set protocols pim6 interface \ - - Use this command to enable PIMv6 in the selected interface so that it - can communicate with PIMv6 neighbors. This command also enables MLD reports - and query on the interface unless {cfgcmd}`mld disable` is configured. -``` - - -```{cfgcmd} set protocols pim6 interface \ mld disable - -Disable MLD reports and query on the interface. -``` - - -## Tuning commands - -You can also tune multicast with the following commands. - -```{cfgcmd} set protocols pim6 interface \ mld interval \ - -Use this command to configure in the selected interface the MLD -host query interval (1-65535) in seconds that PIM will use. -The default value is 125 seconds. -``` - -```{cfgcmd} set protocols pim6 interface \ mld join \ - -Use this command to allow the selected interface to join a multicast group. -``` - -```{cfgcmd} set protocols pim6 interface \ mld join \ source \ - -Use this command to allow the selected interface to join a source-specific multicast -group. -``` - -```{cfgcmd} set protocols pim6 interface \ mld last-member-query-count \ - -Set the MLD last member query count. The default value is 2. -``` - -```{cfgcmd} set protocols pim6 interface \ mld last-member-query-interval \ - -Set the MLD last member query interval in milliseconds (100-6553500). The default value is 1000 milliseconds. -``` - -```{cfgcmd} set protocols pim6 interface \ mld max-response-time \ - -Set the MLD query response timeout in milliseconds (100-6553500). The default value is 10000 milliseconds. -``` - -```{cfgcmd} set protocols pim6 interface \ mld version \ - -Set the MLD version used on this interface. The default value is 2. -``` - - -### Configuration Example - -To enable MLD reports and query on interfaces `eth0` and `eth1`: - -```none -set protocols pim6 interface eth0 -set protocols pim6 interface eth1 -``` - -The following configuration explicitly joins multicast group `ff15::1234` on interface `eth1` -and source-specific multicast group `ff15::5678` with source address `2001:db8::1` on interface -`eth1`: - -```none -set protocols pim6 interface eth0 mld join ff15::1234 -set protocols pim6 interface eth1 mld join ff15::5678 source 2001:db8::1 -``` diff --git a/docs/configuration/protocols/rip.md b/docs/configuration/protocols/rip.md deleted file mode 100644 index 684337d6..00000000 --- a/docs/configuration/protocols/rip.md +++ /dev/null @@ -1,294 +0,0 @@ ---- -lastproofread: '2021-10-04' ---- - -(rip)= - -# RIP - -{abbr}`RIP (Routing Information Protocol)` is a widely deployed interior gateway -protocol. RIP was developed in the 1970s at Xerox Labs as part of the XNS -routing protocol. RIP is a distance-vector protocol and is based on the -Bellman-Ford algorithms. As a distance-vector protocol, RIP router send updates -to its neighbors periodically, thus allowing the convergence to a known -topology. In each update, the distance to any given network will be broadcast -to its neighboring router. - -Supported versions of RIP are: - -> - RIPv1 as described in {rfc}`1058` -> - RIPv2 as described in {rfc}`2453` - -## General Configuration - -```{cfgcmd} set protocols rip network \ - -This command enables RIP and sets the RIP enable interface by NETWORK. -The interfaces which have addresses matching with NETWORK are enabled. -``` - - -```{cfgcmd} set protocols rip interface \ - -This command specifies a RIP enabled interface by interface name. Both -the sending and receiving of RIP packets will be enabled on the port -specified in this command. -``` - - -```{cfgcmd} set protocols rip neighbor \ - -This command specifies a RIP neighbor. When a neighbor doesn’t understand -multicast, this command is used to specify neighbors. In some cases, not -all routers will be able to understand multicasting, where packets are -sent to a network or a group of addresses. In a situation where a neighbor -cannot process multicast packets, it is necessary to establish a direct -link between routers. -``` - - -```{cfgcmd} set protocols rip passive-interface interface \ - -This command sets the specified interface to passive mode. On passive mode -interface, all receiving packets are processed as normal and VyOS does not -send either multicast or unicast RIP packets except to RIP neighbors -specified with neighbor command. -``` - - -```{cfgcmd} set protocols rip passive-interface interface default - -This command specifies all interfaces to passive mode. -``` - -## Optional Configuration - -```{cfgcmd} set protocols rip default-distance \ - -This command change the distance value of RIP. The distance range is 1 to 255. - -> :::{note} -> Routes with a distance of 255 are effectively disabled and not -> installed into the kernel. -> ::: -``` - - -```{cfgcmd} set protocols rip network-distance \ distance \ - -This command sets default RIP distance to a specified value when the routes -source IP address matches the specified prefix. -``` - - -```{cfgcmd} set protocols rip network-distance \ access-list \ - -This command can be used with previous command to sets default RIP distance -to specified value when the route source IP address matches the specified -prefix and the specified access-list. -``` - - -```{cfgcmd} set protocols rip default-information originate - -This command generate a default route into the RIP. -``` - - -```{cfgcmd} set protocols rip distribute-list access-list \ \ - -This command can be used to filter the RIP path using access lists. -{cfgcmd}`in` and {cfgcmd}`out` this is the direction in which the access -lists are applied. -``` - - -```{cfgcmd} set protocols rip distribute-list interface \ access-list \ \ - -This command allows you apply access lists to a chosen interface to -filter the RIP path. -``` - - -```{cfgcmd} set protocols rip distribute-list prefix-list \ \ - -This command can be used to filter the RIP path using prefix lists. -{cfgcmd}`in` and {cfgcmd}`out` this is the direction in which the prefix -lists are applied. -``` - - -```{cfgcmd} set protocols rip distribute-list interface \ prefix-list \ \ - -This command allows you apply prefix lists to a chosen interface to -filter the RIP path. -``` - - -```{cfgcmd} set protocols rip route \ - -This command is specific to FRR and VyOS. The route command makes a static -route only inside RIP. This command should be used only by advanced users -who are particularly knowledgeable about the RIP protocol. In most cases, -we recommend creating a static route in VyOS and redistributing it in RIP -using {cfgcmd}`redistribute static`. -``` - - -```{cfgcmd} set protocols rip timers update \ - -This command specifies the update timer. Every update timer seconds, the -RIP process is awakened to send an unsolicited response message containing -the complete routing table to all neighboring RIP routers. The time range -is 5 to 2147483647. The default value is 30 seconds. -``` - - -```{cfgcmd} set protocols rip timers timeout \ - -This command specifies the timeout timer. Upon expiration of the timeout, -the route is no longer valid; however, it is retained in the routing table -for a short time so that neighbors can be notified that the route has been -dropped. The time range is 5 to 2147483647. The default value is 180 -seconds. -``` - - -```{cfgcmd} set protocols rip timers garbage-collection \ - -This command specifies the garbage-collection timer. Upon expiration of -the garbage-collection timer, the route is finally removed from the -routing table. The time range is 5 to 2147483647. The default value is 120 -seconds. -``` - -## Redistribution Configuration - -```{cfgcmd} set protocols rip redistribute \ - -This command redistributes routing information from the given route source -into the RIP tables. There are five modes available for route source: bgp, -connected, kernel, ospf, static. -``` - - -```{cfgcmd} set protocols rip redistribute \ metric \ - -This command specifies metric for redistributed routes from the given route -source. There are five modes available for route source: bgp, connected, -kernel, ospf, static. The metric range is 1 to 16. -``` - - -```{cfgcmd} set protocols rip redistribute \ route-map \ - -This command allows to use route map to filter redistributed routes from -the given route source. There are five modes available for route source: -bgp, connected, kernel, ospf, static. -``` - - -```{cfgcmd} set protocols rip default-metric \ - -This command modifies the default metric (hop count) value for redistributed -routes. The metric range is 1 to 16. The default value is 1. This command -does not affect connected route even if it is redistributed by -{cfgcmd}`redistribute connected`. To modify connected routes metric -value, please use {cfgcmd}`redistribute connected metric`. -``` - -## Interfaces Configuration - -```{cfgcmd} set interfaces \ \ ip rip authentication plaintext-password \ - -This command sets the interface with RIP simple password authentication. -This command also sets authentication string. The string must be shorter -than 16 characters. -``` - - -```{cfgcmd} set interfaces \ \ ip rip authentication md5 \ password \ - -This command sets the interface with RIP MD5 authentication. This command -also sets MD5 Key. The key must be shorter than 16 characters. -``` - - -```{cfgcmd} set interfaces \ \ ip rip split-horizon disable - -This command disables split-horizon on the interface. By default, VyOS does -not advertise RIP routes out the interface over which they were learned -(split horizon).3 -``` - - -```{cfgcmd} set interfaces \ \ ip rip split-horizon poison-reverse - -This command enables poison-reverse on the interface. If both poison reverse -and split horizon are enabled, then VyOS advertises the learned routes -as unreachable over the interface on which the route was learned. -``` - -## Operational Mode Commands - -```{opcmd} show ip rip - -This command displays RIP routes. -``` -```none -Codes: R - RIP, C - connected, S - Static, O - OSPF, B - BGP -Sub-codes: - (n) - normal, (s) - static, (d) - default, (r) - redistribute, - (i) - interface - - Network Next Hop Metric From Tag Time -C(i) 10.0.12.0/24 0.0.0.0 1 self 0 -C(i) 10.0.13.0/24 0.0.0.0 1 self 0 -R(n) 10.0.23.0/24 10.0.12.2 2 10.0.12.2 0 02:53 -``` - -```{opcmd} show ip rip status - -The command displays current RIP status. It includes RIP timer, filtering, -version, RIP enabled interface and RIP peer information. -``` -```none -Routing Protocol is "rip" - Sending updates every 30 seconds with +/-50%, next due in 11 seconds - Timeout after 180 seconds, garbage collect after 120 seconds - Outgoing update filter list for all interface is not set - Incoming update filter list for all interface is not set - Default redistribution metric is 1 - Redistributing: - Default version control: send version 2, receive any version - Interface Send Recv Key-chain - eth0 2 1 2 - eth2 2 1 2 - Routing for Networks: - 10.0.12.0/24 - eth0 - Routing Information Sources: - Gateway BadPackets BadRoutes Distance Last Update - 10.0.12.2 0 0 120 00:00:11 - Distance: (default is 120) -``` - -## Configuration Example - -Simple RIP configuration using 2 nodes and redistributing connected interfaces. - -**Node 1:** - -```none -set interfaces loopback address 10.1.1.1/32 -set protocols rip network 192.168.0.0/24 -set protocols rip redistribute connected -``` - -**Node 2:** - -```none -set interfaces loopback address 10.2.2.2/32 -set protocols rip network 192.168.0.0/24 -set protocols rip redistribute connected -``` diff --git a/docs/configuration/protocols/rpki.md b/docs/configuration/protocols/rpki.md deleted file mode 100644 index 1f4cf5bf..00000000 --- a/docs/configuration/protocols/rpki.md +++ /dev/null @@ -1,210 +0,0 @@ -(rpki)= - -# RPKI - -:::{pull-quote} - -There are two types of Network Admins who deal with BGP, those who have -created an international incident and/or outage, and those who are lying - --- [tweet by EvilMog](https://twitter.com/Evil_Mog/status/1230924170508169216), 2020-02-21 -::: - -{abbr}`RPKI (Resource Public Key Infrastructure)` is a framework designed to -secure the Internet routing infrastructure. It associates BGP route -announcements with the correct originating {abbr}`ASN (Autonomus System -Number)` which BGP routers can then use to check each route against the -corresponding {abbr}`ROA (Route Origin Authorisation)` for validity. RPKI is -described in {rfc}`6480`. - -A BGP-speaking router like VyOS can retrieve ROA information from RPKI -"Relying Party software" (often just called an "RPKI server" or "RPKI -validator") by using {abbr}`RTR (RPKI to Router)` protocol. There are several -open source implementations to choose from, such as NLNetLabs' [Routinator] -(written in Rust), OpenBSD's [rpki-client] (written in C), and [StayRTR] (written -in Go). The RTR protocol is described in {rfc}`8210`. - -:::{tip} -If you are new to these routing security technologies then there is an -[excellent guide to RPKI] by NLnet Labs which will get you up to speed -very quickly. Their documentation explains everything from what RPKI is to -deploying it in production. It also has some -[help and operational guidance] including "What can I do about my route -having an Invalid state?" -::: - -## Getting started - -First you will need to deploy an RPKI validator for your routers to use. NLnet -Labs provides a collection of [software] you can compare and settle on one. -Once your server is running you can start validating announcements. - -Imported prefixes during the validation may have values: - -> valid -> -> : The prefix and ASN that originated it match a signed ROA. These are -> probably trustworthy route announcements. -> -> invalid -> -> : The prefix or prefix length and ASN that originated it doesn't -> match any existing ROA. This could be the result of a prefix hijack, or -> merely a misconfiguration, but should probably be treated as -> untrustworthy route announcements. -> -> notfound -> -> : No ROA exists which covers that prefix. Unfortunately this is the case for -> about 40%-50% of the prefixes which were announced to the {abbr}`DFZ -> (default-free zone)` at the start of 2024. - -:::{note} -If you are responsible for the global addresses assigned to your -network, please make sure that your prefixes have ROAs associated with them -to avoid being `notfound` by RPKI. For most ASNs this will involve -publishing ROAs via your {abbr}`RIR (Regional Internet Registry)` (RIPE -NCC, APNIC, ARIN, LACNIC, or AFRINIC), and is something you are encouraged -to do whenever you plan to announce addresses into the DFZ. - -Particularly large networks may wish to run their own RPKI certificate -authority and publication server instead of publishing ROAs via their RIR. -This is a subject far beyond the scope of VyOS' documentation. Consider -reading about [Krill] if this is a rabbit hole you need or especially want -to dive down. -::: - -### Features of the Current Implementation - -In a nutshell, the current implementation provides the following features: - -- The BGP router can connect to one or more RPKI cache servers to receive - validated prefix to origin AS mappings. Advanced failover can be implemented - by server sockets with different preference values. -- If no connection to an RPKI cache server can be established after a - pre-defined timeout, the router will process routes without prefix origin - validation. It still will try to establish a connection to an RPKI cache - server in the background. -- By default, enabling RPKI does not change best path selection. In particular, - invalid prefixes will still be considered during best path selection. However, - the router can be configured to ignore all invalid prefixes. -- Route maps can be configured to match a specific RPKI validation state. This - allows the creation of local policies, which handle BGP routes based on the - outcome of the Prefix Origin Validation. -- Updates from the RPKI cache servers are directly applied and path selection is - updated accordingly. (Soft reconfiguration must be enabled for this to work). - -## Configuration - -```{cfgcmd} set protocols rpki polling-period \<1-86400\> - -Define the time interval to update the local cache - -The default value is 300 seconds. -``` - -```{cfgcmd} set protocols rpki expire-interval \<600-172800\> - -Set the number of seconds the router waits until the router -expires the cache. - -The default value is 7200 seconds. -``` - -```{cfgcmd} set protocols rpki retry-interval \<1-7200\> - -Set the number of seconds the router waits until retrying to connect -to the cache server. - -The default value is 600 seconds. -``` - -```{cfgcmd} set protocols rpki cache \ port \ - -Defined the IPv4, IPv6 or FQDN and port number of the caching RPKI caching -instance which is used. - -This is a mandatory setting. -``` - -```{cfgcmd} set protocols rpki cache \ preference \ - -Multiple RPKI caching instances can be supplied and they need a preference in -which their result sets are used. - -This is a mandatory setting. -``` - - -### SSH - -Connections to the RPKI caching server can not only be established by TCP using -the RTR protocol but you can also rely on a secure SSH session to the server. -This provides transport integrity and confidentiality and it is a good idea if -your validation software supports it. To enable SSH, first you need to create -an SSH client keypair using `generate ssh client-key -/config/auth/id_rsa_rpki`. Once your key is created you can setup the -connection. - -```{cfgcmd} set protocols rpki cache \ ssh username \ - -SSH username to establish an SSH connection to the cache server. -``` - -```{cfgcmd} set protocols rpki cache \ ssh private-key-file \ - -Local path that includes the private key file of the router. -``` - -```{cfgcmd} set protocols rpki cache \ ssh public-key-file \ - -Local path that includes the public key file of the router. -``` - -:::{note} -When using SSH, private-key-file and public-key-file -are mandatory options. -::: - -## Example - -We can build route-maps for import based on these states. Here is a simple -RPKI configuration, where `routinator` is the RPKI-validating "cache" -server with ip `192.0.2.1`: - -```none -set protocols rpki cache 192.0.2.1 port '3323' -set protocols rpki cache 192.0.2.1 preference '1' -``` - -Here is an example route-map to apply to routes learned at import. In this -filter we reject prefixes with the state `invalid`, and set a higher -`local-preference` if the prefix is RPKI `valid` rather than merely -`notfound`. - -```none -set policy route-map ROUTES-IN rule 10 action 'permit' -set policy route-map ROUTES-IN rule 10 match rpki 'valid' -set policy route-map ROUTES-IN rule 10 set local-preference '300' -set policy route-map ROUTES-IN rule 20 action 'permit' -set policy route-map ROUTES-IN rule 20 match rpki 'notfound' -set policy route-map ROUTES-IN rule 20 set local-preference '125' -set policy route-map ROUTES-IN rule 30 action 'deny' -set policy route-map ROUTES-IN rule 30 match rpki 'invalid' -``` - -Once your routers are configured to reject RPKI-invalid prefixes, you can -test whether the configuration is working correctly using Cloudflare's [test] -website. Keep in mind that in order for this to work, you need to have no -default routes or anything else that would still send traffic to RPKI-invalid -destinations. - -[excellent guide to rpki]: https://rpki.readthedocs.io/ -[help and operational guidance]: https://rpki.readthedocs.io/en/latest/about/help.html -[krill]: https://www.nlnetlabs.nl/projects/rpki/krill/ -[routinator]: https://www.nlnetlabs.nl/projects/rpki/routinator/ -[rpki-client]: https://www.rpki-client.org/ -[software]: https://rpki.readthedocs.io/en/latest/ops/tools.html#relying-party-software -[stayrtr]: https://github.com/bgp/stayrtr/ -[test]: https://isbgpsafeyet.com/ -[tweet by evilmog]: diff --git a/docs/configuration/protocols/segment-routing.md b/docs/configuration/protocols/segment-routing.md deleted file mode 100644 index 45c89a41..00000000 --- a/docs/configuration/protocols/segment-routing.md +++ /dev/null @@ -1,359 +0,0 @@ -(segment-routing)= - -# Segment Routing - -Segment Routing (SR) is a network architecture that is similar to source-routing -. In this architecture, the ingress router adds a list of segments, known as -SIDs, to the packet as it enters the network. These segments represent different -portions of the network path that the packet will take. - -The SR segments are portions of the network path taken by the packet, and are -called SIDs. At each node, the first SID of the list is read, executed as a -forwarding function, and may be popped to let the next node read the next SID of -the list. The SID list completely determines the path where the packet is -forwarded. - -Segment Routing can be applied to an existing MPLS-based data plane and defines -a control plane network architecture. In MPLS networks, segments are encoded as -MPLS labels and are added at the ingress router. These MPLS labels are then -exchanged and populated by Interior Gateway Protocols (IGPs) like IS-IS or OSPF -which are running on most ISPs. - -:::{note} -Segment routing defines a control plane network architecture and -can be applied to an existing MPLS based dataplane. In the MPLS networks, -segments are encoded as MPLS labels and are imposed at the ingress router. -MPLS labels are exchanged and populated by IGPs like IS-IS.Segment Routing -as per RFC8667 for MPLS dataplane. It supports IPv4, IPv6 and ECMP and has -been tested against Cisco & Juniper routers.however,this deployment is still -EXPERIMENTAL for FRR. -::: - -## IS-IS SR Configuration - -Segment routing (SR) is used by the IGP protocols to interconnect network -devices, below configuration shows how to enable SR on IS-IS: - -:::{note} -``Known limitations:`` - -No support for level redistribution (L1 to L2 or L2 to L1) - -No support for binding SID - -No support for SRLB - -Only one SRGB and default SPF Algorithm is supported -::: - -```{cfgcmd} set protocols isis segment-routing global-block high-label-value \ - -Set the Segment Routing Global Block i.e. the label range used by MPLS to -store label in the MPLS FIB for Prefix SID. Note that the block size may -not exceed 65535. -``` - - -```{cfgcmd} set protocols isis segment-routing global-block low-label-value \ - -Set the Segment Routing Global Block i.e. the low label range used by MPLS to -store label in the MPLS FIB for Prefix SID. Note that the block size may -not exceed 65535. -``` - - -```{cfgcmd} set protocols isis segment-routing local-block high-label-value \ - -Set the Segment Routing Local Block i.e. the label range used by MPLS to -store label in the MPLS FIB for Prefix SID. Note that the block size may -not exceed 65535.Segment Routing Local Block, The negative command always -unsets both. -``` - - -```{cfgcmd} set protocols isis segment-routing local-block \ - -Set the Segment Routing Local Block i.e. the low label range used by MPLS to -store label in the MPLS FIB for Prefix SID. Note that the block size may -not exceed 65535.Segment Routing Local Block, The negative command always -unsets both. -``` - - -```{cfgcmd} set protocols isis segment-routing maximum-label-depth \<1-16\> - -Set the Maximum Stack Depth supported by the router. The value depend of -the MPLS dataplane. -``` - - -```{cfgcmd} set protocols isis segment-routing prefix \ index value \<0-65535\> - -A segment ID that contains an IP address prefix calculated by an IGP in the -service provider core network. Prefix SIDs are globally unique, this value -indentify it -``` - - -```{cfgcmd} set protocols isis segment-routing prefix \ index \ - -this option allows to configure prefix-sid on SR. The ‘no-php-flag’ means NO -Penultimate Hop Popping that allows SR node to request to its neighbor to -not pop the label. The ‘explicit-null’ flag allows SR node to request to its -neighbor to send IP packet with the EXPLICIT-NULL label. The ‘n-flag-clear’ -option can be used to explicitly clear the Node flag that is set by default -for Prefix-SIDs associated to loopback addresses. This option is necessary -to configure Anycast-SIDs. -``` - -```{opcmd} show isis segment-routing node - - Show detailed information about all learned Segment Routing Nodes -``` - - -```{opcmd} show isis route prefix-sid - -Show detailed information about prefix-sid and label learned -``` - -:::{note} -more information related IGP - {ref}`routing-isis` -::: - - -## OSPF SR Configuration - - -Segment routing (SR) is used by the IGP protocols to interconnect network -devices, below configuration shows how to enable SR on OSPF: - -```{cfgcmd} set protocols ospf parameters opaque-lsa - -Enable the Opaque-LSA capability (rfc2370), necessary to transport label -on IGP -``` - -```{cfgcmd} set protocols ospf segment-routing global-block high-label-value \ - -Set the Segment Routing Global Block i.e. the label range used by MPLS to -store label in the MPLS FIB for Prefix SID. Note that the block size may -not exceed 65535. -``` - -```{cfgcmd} set protocols ospf segment-routing global-block low-label-value \ - -Set the Segment Routing Global Block i.e. the low label range used by MPLS to -store label in the MPLS FIB for Prefix SID. Note that the block size may -not exceed 65535. -``` - -```{cfgcmd} set protocols ospf segment-routing local-block high-label-value \ - -Set the Segment Routing Local Block i.e. the label range used by MPLS to -store label in the MPLS FIB for Prefix SID. Note that the block size may -not exceed 65535.Segment Routing Local Block, The negative command always -unsets both. -``` - -```{cfgcmd} set protocols ospf segment-routing local-block \ - -Set the Segment Routing Local Block i.e. the low label range used by MPLS to -store label in the MPLS FIB for Prefix SID. Note that the block size may -not exceed 65535.Segment Routing Local Block, The negative command always -unsets both. -``` - -```{cfgcmd} set protocols ospf segment-routing maximum-label-depth \<1-16\> - -Set the Maximum Stack Depth supported by the router. The value depend of -the MPLS dataplane. -``` - -```{cfgcmd} set protocols ospf segment-routing prefix \ index value \<0-65535\> - -A segment ID that contains an IP address prefix calculated by an IGP in the -service provider core network. Prefix SIDs are globally unique, this value -indentify it -``` - -```{cfgcmd} set protocols ospf segment-routing prefix \ index \ - -this option allows to configure prefix-sid on SR. The ‘no-php-flag’ means NO -Penultimate Hop Popping that allows SR node to request to its neighbor to -not pop the label. The ‘explicit-null’ flag allows SR node to request to its -neighbor to send IP packet with the EXPLICIT-NULL label. The ‘n-flag-clear’ -option can be used to explicitly clear the Node flag that is set by default -for Prefix-SIDs associated to loopback addresses. This option is necessary -to configure Anycast-SIDs. -``` - -:::{note} -more information related IGP - {ref}`routing-ospf` -::: - -## Configuration Example - -we described the configuration SR ISIS / SR OSPF using 2 connected with them to -share label information. - -### Enable IS-IS with Segment Routing (Experimental) - -**Node 1:** - -```none -set interfaces loopback lo address '192.168.255.255/32' -set interfaces ethernet eth1 address '192.0.2.1/24' - -set protocols isis interface eth1 -set protocols isis interface lo -set protocols isis net '49.0001.1921.6825.5255.00' -set protocols isis segment-routing global-block high-label-value '599' -set protocols isis segment-routing global-block low-label-value '550' -set protocols isis segment-routing prefix 192.168.255.255/32 index value '1' -set protocols isis segment-routing prefix 192.168.255.255/32 index explicit-null -set protocols mpls interface 'eth1' -``` - -**Node 2:** - -```none -set interfaces loopback lo address '192.168.255.254/32' -set interfaces ethernet eth1 address '192.0.2.2/24' - -set protocols isis interface eth1 -set protocols isis interface lo -set protocols isis net '49.0001.1921.6825.5254.00' -set protocols isis segment-routing global-block high-label-value '599' -set protocols isis segment-routing global-block low-label-value '550' -set protocols isis segment-routing prefix 192.168.255.254/32 index value '2' -set protocols isis segment-routing prefix 192.168.255.254/32 index explicit-null -set protocols mpls interface 'eth1' -``` - -This gives us MPLS segment routing enabled and labels for far end loopbacks: - -```none -Node-1@vyos:~$ show mpls table - Inbound Label Type Nexthop Outbound Label - ---------------------------------------------------------------------- - 552 SR (IS-IS) 192.0.2.2 IPv4 Explicit Null <-- Node-2 loopback learned on Node-1 - 15000 SR (IS-IS) 192.0.2.2 implicit-null - 15001 SR (IS-IS) fe80::e87:6cff:fe09:1 implicit-null - 15002 SR (IS-IS) 192.0.2.2 implicit-null - 15003 SR (IS-IS) fe80::e87:6cff:fe09:1 implicit-null - -Node-2@vyos:~$ show mpls table - Inbound Label Type Nexthop Outbound Label - --------------------------------------------------------------------- - 551 SR (IS-IS) 192.0.2.1 IPv4 Explicit Null <-- Node-1 loopback learned on Node-2 - 15000 SR (IS-IS) 192.0.2.1 implicit-null - 15001 SR (IS-IS) fe80::e33:2ff:fe80:1 implicit-null - 15002 SR (IS-IS) 192.0.2.1 implicit-null - 15003 SR (IS-IS) fe80::e33:2ff:fe80:1 implicit-null -``` - -Here is the routing tables showing the MPLS segment routing label operations: - -```none -Node-1@vyos:~$ show ip route isis -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -I 192.0.2.0/24 [115/20] via 192.0.2.2, eth1 inactive, weight 1, 00:07:48 -I>* 192.168.255.254/32 [115/20] via 192.0.2.2, eth1, label IPv4 Explicit Null, weight 1, 00:03:39 - -Node-2@vyos:~$ show ip route isis -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -I 192.0.2.0/24 [115/20] via 192.0.2.1, eth1 inactive, weight 1, 00:07:46 -I>* 192.168.255.255/32 [115/20] via 192.0.2.1, eth1, label IPv4 Explicit Null, weight 1, 00:03:43 -``` - - -### Enable OSPF with Segment Routing (Experimental): - -**Node 1** - -```none -set interfaces loopback lo address 10.1.1.1/32 -set interfaces ethernet eth0 address 192.168.0.1/24 -set protocols ospf area 0 network '192.168.0.0/24' -set protocols ospf area 0 network '10.1.1.1/32' -set protocols ospf parameters opaque-lsa -set protocols ospf parameters router-id '10.1.1.1' -set protocols ospf segment-routing global-block high-label-value '1100' -set protocols ospf segment-routing global-block low-label-value '1000' -set protocols ospf segment-routing prefix 10.1.1.1/32 index explicit-null -set protocols ospf segment-routing prefix 10.1.1.1/32 index value '1' -``` - -**Node 2** - -```none -set interfaces loopback lo address 10.1.1.2/32 -set interfaces ethernet eth0 address 192.168.0.2/24 -set protocols ospf area 0 network '192.168.0.0/24' -set protocols ospf area 0 network '10.1.1.2/32' -set protocols ospf parameters opaque-lsa -set protocols ospf parameters router-id '10.1.1.2' -set protocols ospf segment-routing global-block high-label-value '1100' -set protocols ospf segment-routing global-block low-label-value '1000' -set protocols ospf segment-routing prefix 10.1.1.2/32 index explicit-null -set protocols ospf segment-routing prefix 10.1.1.2/32 index value '2' -``` - -This gives us MPLS segment routing enabled and labels for far end loopbacks: - -```none -Node-1@vyos:~$ show mpls table - Inbound Label Type Nexthop Outbound Label - ----------------------------------------------------------- - 1002 SR (OSPF) 192.168.0.2 IPv4 Explicit Null <-- Node-2 loopback learned on Node-1 - 15000 SR (OSPF) 192.168.0.2 implicit-null - 15001 SR (OSPF) 192.168.0.2 implicit-null - -Node-2@vyos:~$ show mpls table - Inbound Label Type Nexthop Outbound Label - ----------------------------------------------------------- - 1001 SR (OSPF) 192.168.0.1 IPv4 Explicit Null <-- Node-1 loopback learned on Node-2 - 15000 SR (OSPF) 192.168.0.1 implicit-null - 15001 SR (OSPF) 192.168.0.1 implicit-null -``` - -Here is the routing tables showing the MPLS segment routing label operations: - -```none -Node-1@vyos:~$ show ip route ospf -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -O 10.1.1.1/32 [110/0] is directly connected, lo, weight 1, 00:03:43 -O>* 10.1.1.2/32 [110/1] via 192.168.0.2, eth0, label IPv4 Explicit Null, weight 1, 00:03:32 -O 192.168.0.0/24 [110/1] is directly connected, eth0, weight 1, 00:03:43 - -Node-2@vyos:~$ show ip route ospf -Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure - -O>* 10.1.1.1/32 [110/1] via 192.168.0.1, eth0, label IPv4 Explicit Null, weight 1, 00:03:36 -O 10.1.1.2/32 [110/0] is directly connected, lo, weight 1, 00:03:51 -O 192.168.0.0/24 [110/1] is directly connected, eth0, weight 1, 00:03:51 -``` diff --git a/docs/configuration/protocols/static.md b/docs/configuration/protocols/static.md deleted file mode 100644 index 357f7076..00000000 --- a/docs/configuration/protocols/static.md +++ /dev/null @@ -1,298 +0,0 @@ -(routing-static)= - -# Static - -Static routes are manually configured routes, which, in general, cannot be -updated dynamically from information VyOS learns about the network topology from -other routing protocols. However, if a link fails, the router will remove -routes, including static routes, from the {abbr}`RIPB (Routing Information -Base)` that used this interface to reach the next hop. In general, static -routes should only be used for very simple network topologies, or to override -the behavior of a dynamic routing protocol for a small number of routes. The -collection of all routes the router has learned from its configuration or from -its dynamic routing protocols is stored in the RIB. Unicast routes are directly -used to determine the forwarding table used for unicast packet forwarding. - -## IPv4 Unicast Routes - -```{cfgcmd} set protocols static route \ next-hop \ - -Configure next-hop *\* for an IPv4 static route. Multiple static -routes can be created. -``` - -```{cfgcmd} set protocols static route \ next-hop \ disable - -Disable this IPv4 static route entry. -``` - -```{cfgcmd} set protocols static route \ next-hop \ distance \ - -Defines next-hop distance for this route, routes with smaller administrative -distance are elected prior to those with a higher distance. - -Range is 1 to 255, default is 1. - -:::{note} -Routes with a distance of 255 are effectively disabled and not -installed into the kernel. -::: -``` - - -### IPv4 Interface Routes - -```{cfgcmd} set protocols static route \ interface \ - -Allows you to configure the next-hop interface for an interface-based IPv4 -static route. *\* will be the next-hop interface where traffic is -routed for the given *\*. -``` - -```{cfgcmd} set protocols static route \ interface \ disable - -Disables interface-based IPv4 static route. -``` - -```{cfgcmd} set protocols static route \ interface \ distance \ - -Defines next-hop distance for this route, routes with smaller administrative -distance are elected prior to those with a higher distance. - -Range is 1 to 255, default is 1. -``` - - -### IPv4 BFD - -```{cfgcmd} set protocols static route \ next-hop \ bfd - -Configure a static route for *\* using gateway *\* and use the -gateway address as BFD peer destination address. -``` - -```{cfgcmd} set protocols static route \ next-hop \ bfd profile \ - -Configure a static route for *\* using gateway *\* and use the -gateway address as BFD peer destination address with BFD profile *\*. -``` - -```{cfgcmd} set protocols static route \ next-hop \ bfd multi-hop source-address \ - -Configure a static route for *\* using gateway *\* and use the -gateway address as BFD peer destination address with source address -*\* but initiate a multi-hop session. -``` - - -### DHCP Interface Routes - -```{cfgcmd} set protocols static route \ dhcp-interface \ - -Defines route with DHCP interface supplying next-hop IP address. -``` - - -### IPv4 Reject Routes - -```{cfgcmd} set protocol static route \ reject - -Defines route which emits an ICMP unreachable when matched. -``` - -```{cfgcmd} set protocols static route \ reject distance \ - -Defines distance for this route, routes with smaller administrative -distance are elected prior to those with a higher distance. -``` - -```{cfgcmd} set protocols static route \ reject tag \ - -Sets a tag for this route. -``` - -```{cfgcmd} set protocol static route6 \ reject - -Defines route which emits an ICMP unreachable when matched. -``` - - -### IPv4 Blackhole Routes - -```{cfgcmd} set protocols static route \ blackhole - -Use this command to configure a "black-hole" route on the router. A -black-hole route is a route for which the system silently discard packets -that are matched. This prevents networks leaking out public interfaces, but -it does not prevent them from being used as a more specific route inside your -network. -``` - -```{cfgcmd} set protocols static route \ blackhole distance \ - -Defines blackhole distance for this route, routes with smaller administrative -distance are elected prior to those with a higher distance. -``` - -```{cfgcmd} set protocols static route \ blackhole tag \ - -Sets a tag for this route. -``` - - -## IPv6 Unicast Routes - -```{cfgcmd} set protocols static route6 \ next-hop \ - -Configure next-hop *\* for an IPv6 static route. Multiple static -routes can be created. -``` - -```{cfgcmd} set protocols static route6 \ next-hop \ disable - -Disable this IPv6 static route entry. -``` - -```{cfgcmd} set protocols static route6 \ next-hop \ distance \ - -Defines next-hop distance for this route, routes with smaller administrative -distance are elected prior to those with a higher distance. - -Range is 1 to 255, default is 1. - -:::{note} -Routes with a distance of 255 are effectively disabled and not -installed into the kernel. -::: -``` - -```{cfgcmd} set protocols static route6 \ next-hop \ segments \ - -It is possible to specify a static route for ipv6 prefixes using an -SRv6 segments instruction. The ``/`` separator can be used to specify -multiple segment instructions. - -Example: - -:::{code-block} none -set protocols static route6 2001:db8:1000::/36 next-hop 2001:db8:201::ffff segments '2001:db8:aaaa::7/2002::4/2002::3/2002::2' -::: - -:::{code-block} none -vyos@vyos:~$ show ipv6 route -Codes: K - kernel route, C - connected, S - static, R - RIPng, - O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table, - v - VNC, V - VNC-Direct, A - Babel, F - PBR, - f - OpenFabric, - > - selected route, * - FIB route, q - queued, r - rejected, b - backup - t - trapped, o - offload failure -C>* 2001:db8:201::/64 is directly connected, eth0.201, 00:00:46 -S>* 2001:db8:1000::/36 [1/0] via 2001:db8:201::ffff, eth0.201, seg6 2001:db8:aaaa::7,2002::4,2002::3,2002::2, weight 1, 00:00:08 -::: -``` - - -### IPv6 Interface Routes - -```{cfgcmd} set protocols static route6 \ interface \ - -Allows you to configure the next-hop interface for an interface-based IPv6 -static route. *\* will be the next-hop interface where traffic is -routed for the given *\*. -``` - -```{cfgcmd} set protocols static route6 \ interface \ disable - -Disables interface-based IPv6 static route. -``` - -```{cfgcmd} set protocols static route6 \ interface \ distance \ - -Defines next-hop distance for this route, routes with smaller administrative -distance are elected prior to those with a higher distance. - -Range is 1 to 255, default is 1. -``` - -```{cfgcmd} set protocols static route6 \ interface \ segments \ - -It is possible to specify a static route for ipv6 prefixes using an -SRv6 segments instruction. The ``/`` separator can be used to specify -multiple segment instructions. - -Example: - -:::{code-block} none -set protocols static route6 2001:db8:1000::/36 interface eth0 segments '2001:db8:aaaa::7/2002::4/2002::3/2002::2' -::: -``` - - -### IPv6 BFD - -```{cfgcmd} set protocols static route6 \ next-hop \ bfd - -Configure a static route for *\* using gateway *\* and use the -gateway address as BFD peer destination address. -``` - -```{cfgcmd} set protocols static route6 \ next-hop \ bfd profile \ - -Configure a static route for *\* using gateway *\* and use the -gateway address as BFD peer destination address with BFD profile *\*. -``` - -```{cfgcmd} set protocols static route6 \ next-hop \ bfd multi-hop source-address \ - -Configure a static route for *\* using gateway *\* and use the -gateway address as BFD peer destination address with source address -*\* but initiate a multi-hop session. -``` - - -### IPv6 Reject Routes - -```{cfgcmd} set protocol static route6 \ reject - -Defines route which emits an ICMP unreachable when matched. -``` - -```{cfgcmd} set protocols static route6 \ reject distance \ - -Defines distance for this route, routes with smaller administrative -distance are elected prior to those with a higher distance. -``` - -```{cfgcmd} set protocols static route6 \ reject tag \ - -Sets a tag for this route. -``` - - -### IPv6 Blackhole Routes - -```{cfgcmd} set protocols static route6 \ blackhole - -Use this command to configure a "black-hole" route on the router. A -black-hole route is a route for which the system silently discard packets -that are matched. This prevents networks leaking out public interfaces, but -it does not prevent them from being used as a more specific route inside your -network. -``` - -```{cfgcmd} set protocols static route6 \ blackhole distance \ - -Defines blackhole distance for this route, routes with smaller administrative -distance are elected prior to those with a higher distance. -``` - -```{cfgcmd} set protocols static route6 \ blackhole tag \ - -Sets a tag for this route. -``` - - -## Alternate Routing Tables - -Alternate routing tables are used with policy based routing by utilizing -{ref}`vrf`. diff --git a/docs/configuration/protocols/traffic-engineering.md b/docs/configuration/protocols/traffic-engineering.md deleted file mode 100644 index 832023a7..00000000 --- a/docs/configuration/protocols/traffic-engineering.md +++ /dev/null @@ -1,54 +0,0 @@ -(traffic-engineering)= - -# Traffic Engineering - -Traffic Engineering (TE) is possibility to send traffic from node to node using -alternative path. - -## Common link parameters - -Traffic Engineering parameters are used for both IS-IS and OSPF (not supported yet). - -```{cfgcmd} set protocols traffic-engineering admin-group \ bit-position \ - -Create Administrative group and assosiate bit position with it. These groups can be -used in the following commands. - -\ can have value 0-31. There cannot be two groups with same bit position. -``` - - -```{cfgcmd} set protocols traffic-engineering interface \ admin-group \ - -Set administrative group for interface \. Multiple values can be provided. -``` - - -```{cfgcmd} set protocols traffic-engineering interface \ max-bandwidth \ - -Set maximum bandwidth for interface \. Value given in Mbits per second. -``` - - -```{cfgcmd} set protocols traffic-engineering interface \ max-reservable-bandwidth \ - -Set maximum reservable bandwidth for interface \. Value given in Mbits per second. -``` - -## IS-IS TE Configuration - -Traffic Engineering (TE) can be enabled and exported for IS-IS -using the following commands: - -```{cfgcmd} set protocols isis traffic-engineering enable - -Enable Traffic Engineering for IS-IS. -``` -```{cfgcmd} set protocols isis traffic-engineering export - -Export Traffic Engineering data to neighbors. -``` -```{cfgcmd} set protocols isis traffic-engineering address \ - -Configure IPv4 address for MPLS-TE. -``` \ No newline at end of file -- cgit v1.2.3