From 5dfad44cf9caa458fb07509a90b6cb52777a26d0 Mon Sep 17 00:00:00 2001 From: srividya0208 Date: Tue, 28 Jun 2022 14:42:42 -0400 Subject: bgp:syntax check Removed this config line "set protocols bgp parameters default no-ipv4-unicast" which does not exist in the latest rolling release but this functionality is enabled by default. And corrected few grammar mistakes --- docs/configuration/protocols/bgp.rst | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'docs/configuration/protocols') diff --git a/docs/configuration/protocols/bgp.rst b/docs/configuration/protocols/bgp.rst index 24d81cef..fb9b9d6e 100644 --- a/docs/configuration/protocols/bgp.rst +++ b/docs/configuration/protocols/bgp.rst @@ -177,7 +177,7 @@ process. The BGP process starts when the first neighbor is configured. .. cfgcmd:: set protocols bgp local-as Set local autonomous system number that this router represents. This is a - a mandatory option! + mandatory option! Peers Configuration ------------------- @@ -431,7 +431,7 @@ Peer Parameters This command enforces Generalized TTL Security Mechanism (GTSM), as specified in :rfc:`5082`. With this command, only neighbors - that are the specified number of hops away will be allowed to + that are specified number of hops away will be allowed to become neighbors. The number of hops range is 1 to 254. This command is mutually exclusive with :cfgcmd:`ebgp-multihop`. @@ -563,11 +563,6 @@ Common parameters Path (both AS number and AS path length), Origin code, MED, IGP metric. Also, the next hop address for each path must be different. -.. cfgcmd:: set protocols bgp parameters default no-ipv4-unicast - - This command allows the user to specify that IPv4 peering is turned off by - default. - .. cfgcmd:: set protocols bgp parameters log-neighbor-changes This command enable logging neighbor up/down changes and reset reason. @@ -984,7 +979,7 @@ Show .. opcmd:: show ip bgp filter-list - This command displays BGP routes allowed by by the specified AS Path + This command displays BGP routes allowed by the specified AS Path access list. .. opcmd:: show bgp neighbors
advertised-routes -- cgit v1.2.3