From 88957530a3e174bfc61e8358cb2b28fd8f1fbbb6 Mon Sep 17 00:00:00 2001 From: Yuriy Andamasov Date: Wed, 6 May 2026 18:46:21 +0300 Subject: feat: import MyST swap mechanism + content for sagitta (replaces #1886) Replaces the broken #1886 with a fresh, properly-converted MyST set for the sagitta (1.4.x) docs, mirroring what landed for circinus via #1897. This PR: - Re-imports 210 md-*.md files for sagitta. Source: ran the pipelines rst-to-myst converter (chrisjsewell/rst-to-myst v0.4.0, with pandoc fallback) on sagittas RST. Post-processed via the pipelines postprocess stage (10 ordered fixes for blanks, admonitions, label hyphens, pandoc artifacts, structural blanks, linter markers). Compared to the broken #1886 content (which was left over from an earlier stage-1-only run): zero raw `
` remnants. - For 23 stems where sagittas RST is byte-identical with currents RST (mostly stable policy/protocol pages and the 404 page), reuses currents already-validated md-*.md content rather than re-converting. - Drops cli and installation/cloud/aws from sagittas swap set: their RST has SEVERE/4 "Title level inconsistent" errors that crash rst-to-myst; they need an independent RST-source fix and are kept as RST-only for now. - Adds the per-page swap mechanism: scripts/swap_sources.py, scripts/import_myst.py, the matching tests under tests/, _swap.txt with 210 stems, _ext/vyos.py MyST renderer fallback, Makefile swap-wrapped targets, .readthedocs.yml swap pre/post hooks. - Adds 187 .webp images and removes 235 superseded .jpg/.png/.jpeg static assets; flips html_logo to vyos-logo.webp. - Adds the MyST swap-related blocks to docs/conf.py only: myst_enable_extensions, myst_fence_as_directive, md-*.md exclude patterns, _swap_exclude.txt reader, _prefer_webp and _copy_md_sources setup hooks. github_version fallback set to 'sagitta' to match the branch (parallel to currents 'current' and circinuss 'circinus'). Deliberately excluded (per user direction): - llms.txt and sphinx-llms-txt / sphinx-sitemap config: these will land separately for sagitta via #1870 plus a new sagitta-specific llms.txt template PR. The conf.py here does not pull those extensions in, so the build does not depend on the new pip packages. Verification before pushing: - 210 md-*.md = 210 _swap.txt stems = 210 RST siblings on sagitta (1:1:1). - 0 files contain raw `
config + +Show the full config uploaded to the QAT device. +``` + + +```{opcmd} show system acceleration qat device \ flows + +Get an overview over the encryption counters. +``` + + +```{opcmd} show system acceleration qat interrupts + +Show binded qat device interrupts to certain core. +``` + + +### Example + +Let's build a simple VPN between 2 Intel® QAT ready devices. + +Side A: + +``` +set interfaces vti vti1 address '192.168.1.2/24' +set vpn ipsec authentication psk right id '10.10.10.2' +set vpn ipsec authentication psk right id '10.10.10.1' +set vpn ipsec authentication psk right secret 'Qwerty123' +set vpn ipsec esp-group MyESPGroup proposal 1 encryption 'aes256' +set vpn ipsec esp-group MyESPGroup proposal 1 hash 'sha256' +set vpn ipsec ike-group MyIKEGroup proposal 1 dh-group '14' +set vpn ipsec ike-group MyIKEGroup proposal 1 encryption 'aes256' +set vpn ipsec ike-group MyIKEGroup proposal 1 hash 'sha256' +set vpn ipsec interface 'eth0' +set vpn ipsec site-to-site peer right authentication local-id '10.10.10.2' +set vpn ipsec site-to-site peer right authentication mode 'pre-shared-secret' +set vpn ipsec site-to-site peer right authentication remote-id '10.10.10.1' +set vpn ipsec site-to-site peer right connection-type 'initiate' +set vpn ipsec site-to-site peer right default-esp-group 'MyESPGroup' +set vpn ipsec site-to-site peer right ike-group 'MyIKEGroup' +set vpn ipsec site-to-site peer right local-address '10.10.10.2' +set vpn ipsec site-to-site peer right remote-address '10.10.10.1' +set vpn ipsec site-to-site peer right vti bind 'vti1' +``` + +Side B: + +``` +set interfaces vti vti1 address '192.168.1.1/24' +set vpn ipsec authentication psk left id '10.10.10.2' +set vpn ipsec authentication psk left id '10.10.10.1' +set vpn ipsec authentication psk left secret 'Qwerty123' +set vpn ipsec esp-group MyESPGroup proposal 1 encryption 'aes256' +set vpn ipsec esp-group MyESPGroup proposal 1 hash 'sha256' +set vpn ipsec ike-group MyIKEGroup proposal 1 dh-group '14' +set vpn ipsec ike-group MyIKEGroup proposal 1 encryption 'aes256' +set vpn ipsec ike-group MyIKEGroup proposal 1 hash 'sha256' +set vpn ipsec interface 'eth0' +set vpn ipsec site-to-site peer left authentication local-id '10.10.10.1' +set vpn ipsec site-to-site peer left authentication mode 'pre-shared-secret' +set vpn ipsec site-to-site peer left authentication remote-id '10.10.10.2' +set vpn ipsec site-to-site peer left connection-type 'initiate' +set vpn ipsec site-to-site peer left default-esp-group 'MyESPGroup' +set vpn ipsec site-to-site peer left ike-group 'MyIKEGroup' +set vpn ipsec site-to-site peer left local-address '10.10.10.1' +set vpn ipsec site-to-site peer left remote-address '10.10.10.2' +set vpn ipsec site-to-site peer left vti bind 'vti1' +``` + +a bandwidth test over the VPN got these results: + +``` +Connecting to host 192.168.1.2, port 5201 +[ 9] local 192.168.1.1 port 51344 connected to 192.168.1.2 port 5201 +[ ID] Interval Transfer Bitrate Retr Cwnd +[ 9] 0.00-1.01 sec 32.3 MBytes 268 Mbits/sec 0 196 KBytes +[ 9] 1.01-2.03 sec 32.5 MBytes 268 Mbits/sec 0 208 KBytes +[ 9] 2.03-3.03 sec 32.5 MBytes 271 Mbits/sec 0 208 KBytes +[ 9] 3.03-4.04 sec 32.5 MBytes 272 Mbits/sec 0 208 KBytes +[ 9] 4.04-5.00 sec 31.2 MBytes 272 Mbits/sec 0 208 KBytes +[ 9] 5.00-6.01 sec 32.5 MBytes 272 Mbits/sec 0 234 KBytes +[ 9] 6.01-7.04 sec 32.5 MBytes 265 Mbits/sec 0 234 KBytes +[ 9] 7.04-8.04 sec 32.5 MBytes 272 Mbits/sec 0 234 KBytes +[ 9] 8.04-9.04 sec 32.5 MBytes 273 Mbits/sec 0 336 KBytes +[ 9] 9.04-10.00 sec 31.2 MBytes 272 Mbits/sec 0 336 KBytes +- - - - - - - - - - - - - - - - - - - - - - - - - +[ ID] Interval Transfer Bitrate Retr +[ 9] 0.00-10.00 sec 322 MBytes 270 Mbits/sec 0 sender +[ 9] 0.00-10.00 sec 322 MBytes 270 Mbits/sec receiver +``` + +with {cfgcmd}`set system acceleration qat` on both systems the bandwidth +increases. + +``` +Connecting to host 192.168.1.2, port 5201 +[ 9] local 192.168.1.1 port 51340 connected to 192.168.1.2 port 5201 +[ ID] Interval Transfer Bitrate Retr Cwnd +[ 9] 0.00-1.00 sec 97.3 MBytes 817 Mbits/sec 0 1000 KBytes +[ 9] 1.00-2.00 sec 92.5 MBytes 776 Mbits/sec 0 1.07 MBytes +[ 9] 2.00-3.00 sec 92.5 MBytes 776 Mbits/sec 0 820 KBytes +[ 9] 3.00-4.00 sec 92.5 MBytes 776 Mbits/sec 0 899 KBytes +[ 9] 4.00-5.00 sec 91.2 MBytes 765 Mbits/sec 0 972 KBytes +[ 9] 5.00-6.00 sec 92.5 MBytes 776 Mbits/sec 0 1.02 MBytes +[ 9] 6.00-7.00 sec 92.5 MBytes 776 Mbits/sec 0 1.08 MBytes +[ 9] 7.00-8.00 sec 92.5 MBytes 776 Mbits/sec 0 1.14 MBytes +[ 9] 8.00-9.00 sec 91.2 MBytes 765 Mbits/sec 0 915 KBytes +[ 9] 9.00-10.00 sec 92.5 MBytes 776 Mbits/sec 0 1000 KBytes +- - - - - - - - - - - - - - - - - - - - - - - - - +[ ID] Interval Transfer Bitrate Retr +[ 9] 0.00-10.00 sec 927 MBytes 778 Mbits/sec 0 sender +[ 9] 0.00-10.01 sec 925 MBytes 775 Mbits/sec receiver +``` + +[intel® qat]: https://www.intel.com/content/www/us/en/architecture-and-technology/intel-quick-assist-technology-overview.html diff --git a/docs/configuration/system/md-conntrack.md b/docs/configuration/system/md-conntrack.md new file mode 100644 index 00000000..b5f926b7 --- /dev/null +++ b/docs/configuration/system/md-conntrack.md @@ -0,0 +1,365 @@ +# Conntrack + +VyOS can be configured to track connections using the connection +tracking subsystem. Connection tracking becomes operational once either +stateful firewall or NAT is configured. + +## Configure + +```{eval-rst} +.. cfgcmd:: set system conntrack table-size <1-50000000> + :defaultvalue: + + The connection tracking table contains one entry for each connection being + tracked by the system. +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack expect-table-size <1-50000000> + :defaultvalue: + + The connection tracking expect table contains one entry for each expected + connection related to an existing connection. These are generally used by + “connection tracking helper” modules such as FTP. + The default size of the expect table is 2048 entries. +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack hash-size <1-50000000> + :defaultvalue: + + Set the size of the hash table. The connection tracking hash table makes + searching the connection tracking table faster. The hash table uses + “buckets” to record entries in the connection tracking table. +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack modules ftp +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack modules h323 +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack modules nfs +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack modules pptp +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack modules sip +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack modules sqlnet +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack modules tftp + + Configure the connection tracking protocol helper modules. + All modules are enable by default. + + | Use `delete system conntrack modules` to deactive all modules. + | Or, for example ftp, `delete system conntrack modules ftp`. + +``` + +### Define Conection Timeouts + +VyOS supports setting timeouts for connections according to the +connection type. You can set timeout values for generic connections, for ICMP +connections, UDP connections, or for TCP connections in a number of different +states. + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout icmp <1-21474836> + :defaultvalue: +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout other <1-21474836> + :defaultvalue: +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout tcp close <1-21474836> + :defaultvalue: +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout tcp close-wait <1-21474836> + :defaultvalue: +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout tcp established <1-21474836> + :defaultvalue: +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout tcp fin-wait <1-21474836> + :defaultvalue: +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout tcp last-ack <1-21474836> + :defaultvalue: +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout tcp syn-recv <1-21474836> + :defaultvalue: +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout tcp syn-sent <1-21474836> + :defaultvalue: +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout tcp time-wait <1-21474836> + :defaultvalue: +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout udp other <1-21474836> + :defaultvalue: +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout udp stream <1-21474836> + :defaultvalue: + + Set the timeout in secounds for a protocol or state. + +``` + +You can also define custom timeout values to apply to a specific subset of +connections, based on a packet and flow selector. To do this, you need to +create a rule defining the packet and flow selector. + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> description + + Set a rule description. + +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> destination address +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> source address + + set a destination and/or source address. Accepted input: + + .. code-block:: none + + IP address to match + Subnet to match + - + IP range to match + ! Match everything except the specified address + ! Match everything except the specified subnet + !- + Match everything except the specified range +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> destination port +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> source port + + Set a destination and/or source port. Accepted input: + + .. code-block:: none + + Named port (any name in /etc/services, e.g., http) + <1-65535> Numbered port + - Numbered port range (e.g., 1001-1005) + + Multiple destination ports can be specified as a comma-separated list. + The whole list can also be "negated" using '!'. For example: + `!22,telnet,http,123,1001-1005`` + + +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol icmp <1-21474836> +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol other <1-21474836> +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp close <1-21474836> +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp close-wait <1-21474836> +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp established <1-21474836> +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp fin-wait <1-21474836> +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp last-ack <1-21474836> +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp syn-recv <1-21474836> +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp syn-sent <1-21474836> +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp time-wait <1-21474836> +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol udp other <1-21474836> +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol udp stream <1-21474836> + + Set the timeout in secounds for a protocol or state in a custom rule. + +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack tcp half-open-connections <1-21474836> + :defaultvalue: + + Set the maximum number of TCP half-open connections. +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack tcp loose + :defaultvalue: + + Policy to track previously established connections. +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack tcp max-retrans <1-2147483647> + :defaultvalue: + + Set the number of TCP maximum retransmit attempts. +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack ignore rule <1-9999> description +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack ignore rule <1-9999> destination address +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack ignore rule <1-9999> destination port +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack ignore rule <1-9999> inbound-interface +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack ignore rule <1-9999> protocol +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack ignore rule <1-9999> source address +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack ignore rule <1-9999> source port + + Customized ignore rules, based on a packet and flow selector. +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log icmp destroy +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log icmp new +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log icmp update +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log other destroy +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log other new +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log other update +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log tcp destroy +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log tcp new +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log tcp update close-wait +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log tcp update established +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log tcp update fin-wait +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log tcp update last-ack +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log tcp update syn-received +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log tcp update time-wait +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log udp destroy +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log udp new +``` + +```{eval-rst} +.. cfgcmd:: set system conntrack log udp update + + Log the connection tracking events per protocol. +``` diff --git a/docs/configuration/system/md-console.md b/docs/configuration/system/md-console.md new file mode 100644 index 00000000..adcaef8c --- /dev/null +++ b/docs/configuration/system/md-console.md @@ -0,0 +1,47 @@ +(serial-console)= + +# Serial Console + +For the average user a serial console has no advantage over a console offered +by a directly attached keyboard and screen. Serial consoles are much slower, +taking up to a second to fill a 80 column by 24 line screen. Serial consoles +generally only support non-proportional ASCII text, with limited support for +languages other than English. + +There are some scenarios where serial consoles are useful. System administration +of remote computers is usually done using {ref}`ssh`, but there are times when +access to the console is the only way to diagnose and correct software failures. +Major upgrades to the installed distribution may also require console access. + +```{eval-rst} +.. cfgcmd:: set system console device + + Defines the specified device as a system console. Available console devices + can be (see completion helper): + + * ``ttySN`` - Serial device name + * ``ttyUSBX`` - USB Serial device name + * ``hvc0`` - Xen console +``` + +```{eval-rst} +.. cfgcmd:: set system console device speed + + The speed (baudrate) of the console device. Supported values are: + + * ``1200`` - 1200 bps + * ``2400`` - 2400 bps + * ``4800`` - 4800 bps + * ``9600`` - 9600 bps + * ``19200`` - 19,200 bps + * ``38400`` - 38,400 bps (default for Xen console) + * ``57600`` - 57,600 bps + * ``115200`` - 115,200 bps (default for serial console) + + .. note:: If you use USB to serial converters for connecting to your VyOS + appliance please note that most of them use software emulation without flow + control. This means you should start with a common baud rate (most likely + 9600 baud) as otherwise you probably can not connect to the device using + high speed baud rates as your serial converter simply can not process this + data rate. +``` diff --git a/docs/configuration/system/md-default-route.md b/docs/configuration/system/md-default-route.md new file mode 100644 index 00000000..9f2793d1 --- /dev/null +++ b/docs/configuration/system/md-default-route.md @@ -0,0 +1,40 @@ +(default-gateway)= + +# Default Gateway/Route + +In the past (VyOS 1.1) used a gateway-address configured under the system tree +({cfgcmd}`set system gateway-address
`), this is no longer supported +and existing configurations are migrated to the new CLI command. + +## Configuration + +```{cfgcmd} set protocols static route 0.0.0.0/0 next-hop \ + +Specify static route into the routing table sending all non local traffic +to the nexthop address \. +``` + +```{cfgcmd} delete protocols static route 0.0.0.0/0 + +Delete default route from the system. +``` + + +## Operation + +```{opcmd} show ip route 0.0.0.0 + +Show routing table entry for the default route. + +:::{code-block} none +vyos@vyos:~$ show ip route 0.0.0.0 +Routing entry for 0.0.0.0/0 +Known via "static", distance 10, metric 0, best +Last update 09:46:30 ago +* 172.18.201.254, via eth0.201 +::: +``` + +:::{seealso} +Configuration of {ref}`routing-static` +::: diff --git a/docs/configuration/system/md-flow-accounting.md b/docs/configuration/system/md-flow-accounting.md new file mode 100644 index 00000000..9b328fff --- /dev/null +++ b/docs/configuration/system/md-flow-accounting.md @@ -0,0 +1,248 @@ +(flow-accounting)= + +# Flow Accounting + +VyOS supports flow-accounting for both IPv4 and IPv6 traffic. The system acts +as a flow exporter, and you are free to use it with any compatible collector. + +Flows can be exported via two different protocols: NetFlow (versions 5, 9 and +10/IPFIX) and sFlow. Additionally, you may save flows to an in-memory table +internally in a router. + +:::{warning} +You need to disable the in-memory table in production environments! +Using {abbr}`IMT (In-Memory Table)` may lead to heavy CPU overloading and +unstable flow-accounting behavior. +::: + +## NetFlow / IPFIX + +NetFlow is a feature that was introduced on Cisco routers around 1996 that +provides the ability to collect IP network traffic as it enters or exits an +interface. By analyzing the data provided by NetFlow, a network administrator +can determine things such as the source and destination of traffic, class of +service, and the causes of congestion. A typical flow monitoring setup (using +NetFlow) consists of three main components: + +- **exporter**: aggregates packets into flows and exports flow records towards + one or more flow collectors +- **collector**: responsible for reception, storage and pre-processing of flow + data received from a flow exporter +- **application**: analyzes received flow data in the context of intrusion + detection or traffic profiling, for example + +For connectionless protocols as like ICMP and UDP, a flow is considered +complete once no more packets for this flow appear after configurable timeout. + +NetFlow is usually enabled on a per-interface basis to limit load on the router +components involved in NetFlow, or to limit the amount of NetFlow records +exported. + +## Configuration + +:::{warning} +Using NetFlow on routers with high traffic levels may lead to +high CPU usage and may affect the router's performance. In such cases, +consider using sFlow instead. +::: + +In order for flow accounting information to be collected and displayed for an +interface, the interface must be configured for flow accounting. + +```{eval-rst} +.. cfgcmd:: set system flow-accounting interface + + Configure and enable collection of flow information for the interface + identified by ``. + + You can configure multiple interfaces which whould participate in flow + accounting. +``` + +:::{note} +Will be recorded only packets/flows on **incoming** direction in +configured interfaces by default. +::: + +By default, recorded flows will be saved internally and can be listed with the +CLI command. You may disable using the local in-memory table with the command: + +```{eval-rst} +.. cfgcmd:: set system flow-accounting disable-imt + + If you need to sample also egress traffic, you may want to + configure egress flow-accounting: +``` + +```{eval-rst} +.. cfgcmd:: set system flow-accounting enable-egress + + Internally, in flow-accounting processes exist a buffer for data exchanging + between core process and plugins (each export target is a separated plugin). + If you have high traffic levels or noted some problems with missed records + or stopping exporting, you may try to increase a default buffer size (10 + MiB) with the next command: +``` + +```{eval-rst} +.. cfgcmd:: set system flow-accounting buffer-size + + In case, if you need to catch some logs from flow-accounting daemon, you may + configure logging facility: +``` + +```{eval-rst} +.. cfgcmd:: set system flow-accounting syslog-facility + + TBD +``` + +### Flow Export + +In addition to displaying flow accounting information locally, one can also +exported them to a collection server. + +#### NetFlow + +```{eval-rst} +.. cfgcmd:: set system flow-accounting netflow version + + There are multiple versions available for the NetFlow data. The `` + used in the exported flow data can be configured here. The following + versions are supported: + + * **5** - Most common version, but restricted to IPv4 flows only + * **9** - NetFlow version 9 (default) + * **10** - {abbr}`IPFIX (IP Flow Information Export)` as per {rfc}`3917` +``` + +```{eval-rst} +.. cfgcmd:: set system flow-accounting netflow server
+ + Configure address of NetFlow collector. NetFlow server at `
` can + be both listening on an IPv4 or IPv6 address. +``` + +```{eval-rst} +.. cfgcmd:: set system flow-accounting netflow source-ip
+ + IPv4 or IPv6 source address of NetFlow packets +``` + +```{eval-rst} +.. cfgcmd:: set system flow-accounting netflow engine-id + + NetFlow engine-id which will appear in NetFlow data. The range is 0 to 255. +``` + +```{eval-rst} +.. cfgcmd:: set system flow-accounting netflow sampling-rate + + Use this command to configure the sampling rate for flow accounting. The + system samples one in every `` packets, where `` is the value + configured for the sampling-rate option. The advantage of sampling every n + packets, where n > 1, allows you to decrease the amount of processing + resources required for flow accounting. The disadvantage of not sampling + every packet is that the statistics produced are estimates of actual data + flows. + + Per default every packet is sampled (that is, the sampling rate is 1). +``` + +```{eval-rst} +.. cfgcmd:: set system flow-accounting netflow timeout expiry-interval + + + Specifies the interval at which Netflow data will be sent to a collector. As + per default, Netflow data will be sent every 60 seconds. + + You may also additionally configure timeouts for different types of + connections. +``` + +```{eval-rst} +.. cfgcmd:: set system flow-accounting netflow max-flows + + If you want to change the maximum number of flows, which are tracking + simultaneously, you may do this with this command (default 8192). +``` + +#### sFlow + +:::{note} +Using `system sflow` is recommended in favor of +`system flow-accounting`. See [sflow](sflow.html) +::: + +```{eval-rst} +.. cfgcmd:: set system flow-accounting sflow server
+ + Configure address of sFlow collector. sFlow server at `
` can + be an IPv4 or IPv6 address. But you cannot export to both IPv4 and + IPv6 collectors at the same time! +``` + +```{eval-rst} +.. cfgcmd:: set system flow-accounting sflow sampling-rate + + Enable sampling of packets, which will be transmitted to sFlow collectors. +``` + +```{eval-rst} +.. cfgcmd:: set system flow-accounting sflow agent-address
+ + Configure a sFlow agent address. It can be IPv4 or IPv6 address, but you + must set the same protocol, which is used for sFlow collector addresses. By + default, using router-id from BGP or OSPF protocol, or the primary IP + address from the first interface. +``` + +### Example: + +NetFlow v5 example: + +```none +set system flow-accounting netflow engine-id 100 +set system flow-accounting netflow version 5 +set system flow-accounting netflow server 192.168.2.10 port 2055 +``` + +## Operation + +Once flow accounting is configured on an interfaces it provides the ability to +display captured network traffic information for all configured interfaces. + +```{eval-rst} +.. opcmd:: show flow-accounting interface + + Show flow accounting information for given ``. + + .. code-block:: none + + vyos@vyos:~$ show flow-accounting interface eth0 + IN_IFACE SRC_MAC DST_MAC SRC_IP DST_IP SRC_PORT DST_PORT PROTOCOL TOS PACKETS FLOWS BYTES + ---------- ----------------- ----------------- ------------------------ --------------- ---------- ---------- ---------- ----- --------- ------- ------- + eth0 00:53:01:a8:28:ac ff:ff:ff:ff:ff:ff 192.0.2.2 255.255.255.255 5678 5678 udp 0 1 1 178 + eth0 00:53:01:b2:2f:34 33:33:ff:00:00:00 fe80::253:01ff:feb2:2f34 ff02::1:ff00:0 0 0 ipv6-icmp 0 2 1 144 + eth0 00:53:01:1a:b4:53 33:33:ff:00:00:00 fe80::253:01ff:fe1a:b453 ff02::1:ff00:0 0 0 ipv6-icmp 0 1 1 72 + eth0 00:53:01:b2:22:48 00:53:02:58:a2:92 192.0.2.100 192.0.2.14 40152 22 tcp 16 39 1 2064 + eth0 00:53:01:c8:33:af ff:ff:ff:ff:ff:ff 192.0.2.3 255.255.255.255 5678 5678 udp 0 1 1 154 + eth0 00:53:01:b2:22:48 00:53:02:58:a2:92 192.0.2.100 192.0.2.14 40006 22 tcp 16 146 1 9444 + eth0 00:53:01:b2:22:48 00:53:02:58:a2:92 192.0.2.100 192.0.2.14 0 0 icmp 192 27 1 4455 +``` + +```{eval-rst} +.. opcmd:: show flow-accounting interface host
+ + Show flow accounting information for given `` for a specific host + only. + + .. code-block:: none + + vyos@vyos:~$ show flow-accounting interface eth0 host 192.0.2.14 + IN_IFACE SRC_MAC DST_MAC SRC_IP DST_IP SRC_PORT DST_PORT PROTOCOL TOS PACKETS FLOWS BYTES + ---------- ----------------- ----------------- ----------- ---------- ---------- ---------- ---------- ----- --------- ------- ------- + eth0 00:53:01:b2:22:48 00:53:02:58:a2:92 192.0.2.100 192.0.2.14 40006 22 tcp 16 197 2 12940 + eth0 00:53:01:b2:22:48 00:53:02:58:a2:92 192.0.2.100 192.0.2.14 40152 22 tcp 16 94 1 4924 + eth0 00:53:01:b2:22:48 00:53:02:58:a2:92 192.0.2.100 192.0.2.14 0 0 icmp 192 36 1 5877 +``` diff --git a/docs/configuration/system/md-frr.md b/docs/configuration/system/md-frr.md new file mode 100644 index 00000000..37e6e502 --- /dev/null +++ b/docs/configuration/system/md-frr.md @@ -0,0 +1,44 @@ +(system-frr)= + +# FRR + +VyOS uses \[FRRouting\]() as the control plane for dynamic +and static routing. The routing daemon behavior can be adjusted during runtime, +but require either a restart of the routing daemon, or a reboot of the system. + +```{eval-rst} +.. cfgcmd:: set system frr bmp + + Enable {abbr}`BMP (BGP Monitoring Protocol)` support +``` + +```{eval-rst} +.. cfgcmd:: set system frr descriptors + + This allows the operator to control the number of open file descriptors + each daemon is allowed to start with. If the operator plans to run bgp with + several thousands of peers then this is where we would modify FRR to allow + this to happen. +``` + +```{eval-rst} +.. cfgcmd:: set system frr irdp + + Enable ICMP Router Discovery Protocol support +``` + +```{eval-rst} +.. cfgcmd:: set system frr snmp + + Enable SNMP support for an individual routing daemon. + + Supported daemons: + + - bgpd + - isisd + - ldpd + - ospf6d + - ospfd + - ripd + - zebra +``` diff --git a/docs/configuration/system/md-host-name.md b/docs/configuration/system/md-host-name.md new file mode 100644 index 00000000..81840d1f --- /dev/null +++ b/docs/configuration/system/md-host-name.md @@ -0,0 +1,70 @@ +(host-information)= + +# Host Information + +This section describes the system's host information and how to configure them, +it covers the following topics: + +- Host name +- Domain +- IP address +- Aliases + +## Hostname + +A hostname is the label (name) assigned to a network device (a host) on a +network and is used to distinguish one device from another on specific networks +or over the internet. On the other hand this will be the name which appears on +the command line prompt. + +```{cfgcmd} set system host-name \ + + The hostname can be up to 63 characters. A hostname + must start and end with a letter or digit, and have as interior characters + only letters, digits, or a hyphen. + + The default hostname used is `vyos`. +``` + +## Domain Name + + +A domain name is the label (name) assigned to a computer network and is thus +unique. VyOS appends the domain name as a suffix to any unqualified name. For +example, if you set the domain name `example.com`, and you would ping the +unqualified name of `crux`, then VyOS qualifies the name to `crux.example.com`. + +```{cfgcmd} set system domain-name \ + +Configure system domain name. A domain name must start and end with a letter +or digit, and have as interior characters only letters, digits, or a hyphen. +``` + +## Static Hostname Mapping + + +How an IP address is assigned to an interface in {ref}`ethernet-interface`. +This section shows how to statically map an IP address to a hostname for local +(meaning on this VyOS instance) name resolution. This is the VyOS equivalent to +`/etc/hosts` file entries. + + +:::{note} +Do *not* manually edit `/etc/hosts`. This file will automatically be +regenerated on boot based on the settings in this section, which means you'll +lose all your manual edits. Instead, configure static host mappings as follows. +::: + +```{cfgcmd} set system static-host-mapping host-name \ inet \ + +Create a static hostname mapping which will always resolve the name +`` to IP address `
`. +``` +```{cfgcmd} set system static-host-mapping host-name \ alias \ + +Create named `` for the configured static mapping for ``. +Thus the address configured as {cfgcmd}`set system static-host-mapping +host-name inet
` can be reached via multiple names. + +Multiple aliases can be specified per host-name. +``` \ No newline at end of file diff --git a/docs/configuration/system/md-index.md b/docs/configuration/system/md-index.md new file mode 100644 index 00000000..624a8434 --- /dev/null +++ b/docs/configuration/system/md-index.md @@ -0,0 +1,36 @@ +# System + +```{eval-rst} +.. toctree:: + :maxdepth: 1 + :includehidden: + + acceleration + conntrack + console + flow-accounting + frr + host-name + ip + ipv6 + lcd + login + name-server + option + proxy + sflow + syslog + sysctl + task-scheduler + time-zone + updates + +``` + +```{eval-rst} +.. toctree:: + :maxdepth: 1 + :includehidden: + + default-route +``` diff --git a/docs/configuration/system/md-ip.md b/docs/configuration/system/md-ip.md new file mode 100644 index 00000000..2445509d --- /dev/null +++ b/docs/configuration/system/md-ip.md @@ -0,0 +1,110 @@ +# IP + +## System configuration commands + +```{eval-rst} +.. cfgcmd:: set system ip disable-forwarding + + Use this command to disable IPv4 forwarding on all interfaces. +``` + +```{eval-rst} +.. cfgcmd:: set system ip disable-directed-broadcast + + Use this command to disable IPv4 directed broadcast forwarding on all + interfaces. + + If set, IPv4 directed broadcast forwarding will be completely disabled + regardless of whether per-interface directed broadcast forwarding is + enabled or not. +``` + +```{eval-rst} +.. cfgcmd:: set system ip arp table-size + + Use this command to define the maximum number of entries to keep in + the ARP cache (1024, 2048, 4096, 8192, 16384, 32768). +``` + +```{eval-rst} +.. cfgcmd:: set system ip multipath layer4-hashing + + Use this command to use Layer 4 information for IPv4 ECMP hashing. +``` + +### Zebra/Kernel route filtering + +Zebra supports prefix-lists and Route Mapss to match routes received from +other FRR components. The permit/deny facilities provided by these commands +can be used to filter which routes zebra will install in the kernel. + +```{eval-rst} +.. cfgcmd:: set system ip protocol route-map + + Apply a route-map filter to routes for the specified protocol. The following + protocols can be used: any, babel, bgp, connected, eigrp, isis, kernel, + ospf, rip, static, table + + .. note:: If you choose any as the option that will cause all protocols that + are sending routes to zebra. +``` + +### Nexthop Tracking + +Nexthop tracking resolve nexthops via the default route by default. This is enabled +by default for a traditional profile of FRR which we use. It and can be disabled if +you do not wan't to e.g. allow BGP to peer across the default route. + +```{eval-rst} +.. cfgcmd:: set system ip nht no-resolve-via-default + + Do not allow IPv4 nexthop tracking to resolve via the default route. This + parameter is configured per-VRF, so the command is also available in the VRF + subnode. +``` + +## Operational commands + +### show commands + +See below the different parameters available for the IPv4 **show** command: + +```none +vyos@vyos:~$ show ip +Possible completions: + access-list Show all IP access-lists + as-path-access-list + Show all as-path-access-lists + bgp Show Border Gateway Protocol (BGP) information + community-list + Show IP community-lists + extcommunity-list + Show extended IP community-lists + forwarding Show IP forwarding status + groups Show IP multicast group membership + igmp Show IGMP (Internet Group Management Protocol) information + large-community-list + Show IP large-community-lists + multicast Show IP multicast + ospf Show IPv4 Open Shortest Path First (OSPF) routing information + pim Show PIM (Protocol Independent Multicast) information + ports Show IP ports in use by various system services + prefix-list Show all IP prefix-lists + protocol Show IP route-maps per protocol + rip Show Routing Information Protocol (RIP) information + route Show IP routes +``` + +### reset commands + +And the different IPv4 **reset** commands available: + +```none +vyos@vyos:~$ reset ip +Possible completions: + arp Reset Address Resolution Protocol (ARP) cache + bgp Clear Border Gateway Protocol (BGP) statistics or status + igmp IGMP clear commands + multicast IP multicast routing table + route Reset IP route +``` diff --git a/docs/configuration/system/md-ipv6.md b/docs/configuration/system/md-ipv6.md new file mode 100644 index 00000000..80f0e33a --- /dev/null +++ b/docs/configuration/system/md-ipv6.md @@ -0,0 +1,235 @@ +# IPv6 + +## System configuration commands + +```{eval-rst} +.. cfgcmd:: set system ipv6 disable-forwarding + + Use this command to disable IPv6 forwarding on all interfaces. +``` + +```{eval-rst} +.. cfgcmd:: set system ipv6 neighbor table-size + + Use this command to define the maximum number of entries to keep in + the Neighbor cache (1024, 2048, 4096, 8192, 16384, 32768). +``` + +```{eval-rst} +.. cfgcmd:: set system ipv6 strict-dad + + Use this command to disable IPv6 operation on interface when + Duplicate Address Detection fails on Link-Local address. +``` + +```{eval-rst} +.. cfgcmd:: set system ipv6 multipath layer4-hashing + + Use this command to user Layer 4 information for ECMP hashing. +``` + +### Zebra/Kernel route filtering + +Zebra supports prefix-lists and Route Mapss to match routes received from +other FRR components. The permit/deny facilities provided by these commands +can be used to filter which routes zebra will install in the kernel. + +```{eval-rst} +.. cfgcmd:: set system ipv6 protocol route-map + + Apply a route-map filter to routes for the specified protocol. The following + protocols can be used: any, babel, bgp, connected, isis, kernel, ospfv3, + ripng, static, table + + .. note:: If you choose any as the option that will cause all protocols that + are sending routes to zebra. +``` + +### Nexthop Tracking + +Nexthop tracking resolve nexthops via the default route by default. This is enabled +by default for a traditional profile of FRR which we use. It and can be disabled if +you do not wan't to e.g. allow BGP to peer across the default route. + +```{eval-rst} +.. cfgcmd:: set system ipv6 nht no-resolve-via-default + + Do not allow IPv6 nexthop tracking to resolve via the default route. This + parameter is configured per-VRF, so the command is also available in the VRF + subnode. +``` + +## Operational commands + +### Show commands + +```{eval-rst} +.. opcmd:: show ipv6 neighbors + + Use this command to show IPv6 Neighbor Discovery Protocol information. +``` + +```{eval-rst} +.. opcmd:: show ipv6 groups + + Use this command to show IPv6 multicast group membership. +``` + +```{eval-rst} +.. opcmd:: show ipv6 forwarding + + Use this command to show IPv6 forwarding status. +``` + +```{eval-rst} +.. opcmd:: show ipv6 route + + Use this command to show IPv6 routes. + + Check the many parameters available for the `show ipv6 route` command: + + .. code-block:: none + + vyos@vyos:~$ show ipv6 route + Possible completions: + Execute the current command + Show IPv6 routes of given address or prefix + + bgp Show IPv6 BGP routes + cache Show kernel IPv6 route cache + connected Show IPv6 connected routes + forward Show kernel IPv6 route table + isis Show IPv6 ISIS routes + kernel Show IPv6 kernel routes + ospfv3 Show IPv6 OSPF6 routes + ripng Show IPv6 RIPNG routes + static Show IPv6 static routes + summary Show IPv6 routes summary + table Show IP routes in policy table + vrf Show IPv6 routes in VRF + +``` + +```{eval-rst} +.. opcmd:: show ipv6 prefix-list + + Use this command to show all IPv6 prefix lists + + There are different parameters for getting prefix-list information: + + .. code-block:: none + + vyos@vyos:~$ show ipv6 prefix-list + Possible completions: + Execute the current command + Show specified IPv6 prefix-list + detail Show detail of IPv6 prefix-lists + summary Show summary of IPv6 prefix-lists +``` + +```{eval-rst} +.. opcmd:: show ipv6 access-list + + Use this command to show all IPv6 access lists + + You can also specify which IPv6 access-list should be shown: + + .. code-block:: none + + vyos@vyos:~$ show ipv6 access-list + Possible completions: + Execute the current command + Show specified IPv6 access-list +``` + +```{eval-rst} +.. opcmd:: show ipv6 bgp + + Use this command to show IPv6 Border Gateway Protocol information. + + + In addition, you can specify many other parameters to get BGP + information: + + .. code-block:: none + + vyos@vyos:~$ show ipv6 bgp + Possible completions: + Execute the current command + Show BGP information for given address or prefix + + community Show routes matching the communities + community-list + Show routes matching the community-list + filter-list Show routes conforming to the filter-list + large-community + Show routes matching the large-community-list + large-community-list + neighbors Show detailed information on TCP and BGP neighbor connections + prefix-list Show routes matching the prefix-list + regexp Show routes matching the AS path regular expression + route-map Show BGP routes matching the specified route map + summary Show summary of BGP neighbor status + +``` + +```{eval-rst} +.. opcmd:: show ipv6 ospfv3 + + Use this command to get information about OSPFv3. + + You can get more specific OSPFv3 information by using the parameters + shown below: + + .. code-block:: none + + vyos@vyos:~$ show ipv6 ospfv3 + Possible completions: + Execute the current command + area Show OSPFv3 spf-tree information + border-routers + Show OSPFv3 border-router (ABR and ASBR) information + database Show OSPFv3 Link state database information + interface Show OSPFv3 interface information + linkstate Show OSPFv3 linkstate routing information + neighbor Show OSPFv3 neighbor information + redistribute Show OSPFv3 redistribute External information + route Show OSPFv3 routing table information +``` + +```{eval-rst} +.. opcmd:: show ipv6 ripng + + Use this command to get information about the RIPNG protocol +``` + +```{eval-rst} +.. opcmd:: show ipv6 ripng status + + Use this command to show the status of the RIPNG protocol + +``` + +### Reset commands + +```{eval-rst} +.. opcmd:: reset bgp ipv6
+ + Use this command to clear Border Gateway Protocol statistics or + status. + +``` + +```{eval-rst} +.. opcmd:: reset ipv6 neighbors
+ + Use this command to reset IPv6 Neighbor Discovery Protocol cache for + an address or interface. +``` + +```{eval-rst} +.. opcmd:: reset ipv6 route cache + + Use this command to flush the kernel IPv6 route cache. + An address can be added to flush it only for that route. +``` diff --git a/docs/configuration/system/md-lcd.md b/docs/configuration/system/md-lcd.md new file mode 100644 index 00000000..c857ae34 --- /dev/null +++ b/docs/configuration/system/md-lcd.md @@ -0,0 +1,46 @@ +(system-display)= + +# System Display (LCD) + +The system LCD {abbr}`LCD (Liquid-crystal display)` option is for users running +VyOS on hardware that features an LCD display. This is typically a small display +built in an 19 inch rack-mountable appliance. Those displays are used to show +runtime data. + +To configure your LCD display you must first identify the used hardware, and +connectivity of the display to your system. This can be any serial port +(`ttySxx`) or serial via USB or even old parallel port interfaces. + +## Configuration + +```{eval-rst} +.. cfgcmd:: set system lcd device + + This is the name of the physical interface used to connect to your LCD + display. Tab completion is supported and it will list you all available + serial interface. + + For serial via USB port information please refor to: {ref}`hardware_usb`. +``` + +```{eval-rst} +.. cfgcmd:: set system lcd model + + This is the LCD model used in your system. + + At the time of this writing the following displays are supported: + + * Crystalfontz CFA-533 + + * Crystalfontz CFA-631 + + * Crystalfontz CFA-633 + + * Crystalfontz CFA-635 + + .. note:: We can't support all displays from the beginning. If your display + type is missing, please create a feature request via Phabricator_. +``` + +```{include} /_include/common-references.txt +``` diff --git a/docs/configuration/system/md-login.md b/docs/configuration/system/md-login.md new file mode 100644 index 00000000..562ed419 --- /dev/null +++ b/docs/configuration/system/md-login.md @@ -0,0 +1,474 @@ +--- +lastproofread: '2022-10-15' +--- + +(user-management)= + +# Login/User Management + +The default VyOS user account (`vyos`), as well as newly created user accounts, +have all capabilities to configure the system. All accounts have sudo +capabilities and therefore can operate as root on the system. + +Both local administered and remote administered {abbr}`RADIUS (Remote +Authentication Dial-In User Service)` accounts are supported. + +## Local + +```{eval-rst} +.. cfgcmd:: set system login user full-name "" + + Create new system user with username `` and real-name specified by + ``. +``` + +```{eval-rst} +.. cfgcmd:: set system login user authentication plaintext-password + + + Specify the plaintext password user by user `` on this system. The + plaintext password will be automatically transferred into a secure hashed + password and not saved anywhere in plaintext. +``` + +```{eval-rst} +.. cfgcmd:: set system login user authentication encrypted-password + + + Setup encrypted password for given username. This is useful for + transferring a hashed password from system to system. +``` + +```{eval-rst} +.. cfgcmd:: set system login user disable + + Disable (lock) account. User will not be able to log in. +``` + +(ssh_key_based_authentication)= + +### Key Based Authentication + +It is highly recommended to use SSH key authentication. By default there is +only one user (`vyos`), and you can assign any number of keys to that user. +You can generate a ssh key with the `ssh-keygen` command on your local +machine, which will (by default) save it as `~/.ssh/id_rsa.pub`. + +Every SSH key comes in three parts: + +`ssh-rsa AAAAB3NzaC1yc2EAAAABAA...VBD5lKwEWB username@host.example.com` + +Only the type (`ssh-rsa`) and the key (`AAAB3N...`) are used. Note that the +key will usually be several hundred characters long, and you will need to copy +and paste it. Some terminal emulators may accidentally split this over several +lines. Be attentive when you paste it that it only pastes as a single line. +The third part is simply an identifier, and is for your own reference. + +```{eval-rst} +.. seealso:: SSH {ref}`ssh_operation` +``` + +```{eval-rst} +.. cfgcmd:: set system login user authentication public-keys + key + + Assign the SSH public key portion `` identified by per-key + `` to the local user ``. +``` + +```{eval-rst} +.. cfgcmd:: set system login user authentication public-keys + type + + Every SSH public key portion referenced by `` requires the + configuration of the `` of public-key used. This type can be any of: + + * ``ecdsa-sha2-nistp256`` + * ``ecdsa-sha2-nistp384`` + * ``ecdsa-sha2-nistp521`` + * ``ssh-dss`` + * ``ssh-ed25519`` + * ``ssh-rsa`` + + .. note:: You can assign multiple keys to the same user by using a unique + identifier per SSH key. +``` + +```{eval-rst} +.. cfgcmd:: set system login user authentication public-keys + options + + Set the options for this public key. See the ssh ``authorized_keys`` man + page for details of what you can specify here. To place a ``"`` + character in the options field, use ``"``, for example + ``from="10.0.0.0/24"`` to restrict where the user + may connect from when using this key. +``` + +### MFA/2FA authentication using OTP (one time passwords) + +It is possible to enhance authentication security by using the {abbr}`2FA +(Two-factor authentication)`/{abbr}`MFA (Multi-factor authentication)` feature +together with {abbr}`OTP (One-Time-Pad)` on VyOS. {abbr}`2FA (Two-factor +authentication)`/{abbr}`MFA (Multi-factor authentication)` is configured +independently per each user. If an OTP key is configured for a user, 2FA/MFA +is automatically enabled for that particular user. If a user does not have an +OTP key configured, there is no 2FA/MFA check for that user. + +```{eval-rst} +.. cfgcmd:: set system login user authentication otp key + + Enable OTP 2FA for user `username` with default settings, using the BASE32 + encoded 2FA/MFA key specified by ``. +``` + +#### Optional/default settings + +```{eval-rst} +.. cfgcmd:: set system login user authentication otp rate-limit + :defaultvalue: + + Limit logins to `` per every ``rate-time`` seconds. Rate limit + must be between 1 and 10 attempts. +``` + +```{eval-rst} +.. cfgcmd:: set system login user authentication otp rate-time + :defaultvalue: + + Limit logins to ``rate-limit`` attemps per every ``. Rate time must + be between 15 and 600 seconds. +``` + +```{eval-rst} +.. cfgcmd:: set system login user authentication otp window-size + :defaultvalue: + + Set window of concurrently valid codes. + + By default, a new token is generated every 30 seconds by the mobile + application. In order to compensate for possible time-skew between + the client and the server, an extra token before and after the current + time is allowed. This allows for a time skew of up to 30 seconds + between authentication server and client. + + For example, if problems with poor time synchronization are experienced, + the window can be increased from its default size of 3 permitted codes + (one previous code, the current code, the next code) to 17 permitted codes + (the 8 previous codes, the current code, and the 8 next codes). This will + permit for a time skew of up to 4 minutes between client and server. + + The window size must be between 1 and 21. +``` + +#### OTP-key generation + +The following command can be used to generate the OTP key as well +as the CLI commands to configure them: + +```{eval-rst} +.. cfgcmd:: generate system login username otp-key hotp-time + rate-limit <1-10> rate-time <15-600> window-size <1-21> +``` + +An example of key generation: + +```none +vyos@vyos:~$ generate system login username otptester otp-key hotp-time rate-limit 2 rate-time 20 window-size 5 +# You can share it with the user, he just needs to scan the QR in his OTP app +# username: otptester +# OTP KEY: J5A64ERPMGJOZXY6FMHHLKXKANNI6TCY +# OTP URL: otpauth://totp/otptester@vyos?secret=J5A64ERPMGJOZXY6FMHHLKXKANNI6TCY&digits=6&period=30 +█████████████████████████████████████████████ +█████████████████████████████████████████████ +████ ▄▄▄▄▄ █▀█ █▄ ▀▄▀▄█▀▄ ▀█▀ █ ▄▄▄▄▄ ████ +████ █ █ █▀▀▀█ ▄▀ █▄▀ ▀▄ ▄ ▀ ▄█ █ █ ████ +████ █▄▄▄█ █▀ █▀▀██▄▄ █ █ ██ ▀▄▀ █ █▄▄▄█ ████ +████▄▄▄▄▄▄▄█▄▀ ▀▄█ █ ▀ █ █ █ █▄█▄█▄▄▄▄▄▄▄████ +████ ▄ █▄ ▄ ▀▄▀▀▀▀▄▀▄▀▄▄▄▀▀▄▄▄ █ █▄█ █████ +████▄▄ ██▀▄▄▄▀▀█▀ ▄ ▄▄▄ ▄▀ ▀ █ ▄ ▄ ██▄█ ████ +█████▄ ██▄▄▀█▄█▄█▄ ▀█▄▀▄ ▀█▀▄ █▄▄▄ ▄ ▄████ +████▀▀▄ ▄█▀▄▀ ▄█▀█▀▄▄▄▀█▄ ██▄▄▄ ▀█ █ ████ +████ ▄▀▄█▀▄▄█▀▀▄▀▀▀▀█ ▄▀▄▀ ▄█ ▀▄ ▄ ▄▀ █▄████ +████▄ ██ ▀▄▀▀ ▄█▀ ▄ ██ ▀█▄█ ▄█ ▄ ▀▄ ▄▄ ████ +████▄█▀▀▄ ▄▄ █▄█▄█▄ █▄▄▀▄▄▀▀▄▄██▀ ▄▀▄▄ ▀▄████ +████▀▄▀ ▄ ▄▀█ ▄ ▄█▀ █ ▀▄▄ ▄█▀ ▄▄ ▀▄▄ ████ +████ ▀███▄ █▄█▄▀▀▀▀▄ ▄█▄▄▀ ▀███ ▄▄█▄▄ ▄████ +████ ███▀ ▄▄▀▀██▀ ▄▀▄█▄▄▄ ██▄▄▀▄▀ ███▄ ▄████ +████▄████▄▄▄▀▄ █▄█▄▀▄▄▄▄██▀ ▄▀ ▄ ▄▄▄ █▄▄█████ +████ ▄▄▄▄▄ █▄▄▄ ▄█▀█▀▀▀▀█▀█▀ █▄█ █▄█ ▄█ ████ +████ █ █ █ ██▄▀▀▀▀▄▄▄▀ ▄▄▄ ▀ ▄ ▄ ▄▄████ +████ █▄▄▄█ █ ▀▀█▀ ▄▄█ █▄▄██▀▀█▀ █▄▀▄██▄█ ████ +████▄▄▄▄▄▄▄█▄█▄█▄█▄▄▄▄▄█▄▄▄█▄██████▄██▄▄▄████ +█████████████████████████████████████████████ +█████████████████████████████████████████████ +# To add this OTP key to configuration, run the following commands: +set system login user otptester authentication otp key 'J5A64ERPMGJOZXY6FMHHLKXKANNI6TCY' +set system login user otptester authentication otp rate-limit '2' +set system login user otptester authentication otp rate-time '20' +set system login user otptester authentication otp window-size '5' +``` + +#### Display OTP key for user + +To display the configured OTP user key, use the command: + +```{eval-rst} +.. cfgcmd:: sh system login authentication user otp + +``` + +An example: + +```none +vyos@vyos:~$ sh system login authentication user otptester otp full +# You can share it with the user, he just needs to scan the QR in his OTP app +# username: otptester +# OTP KEY: J5A64ERPMGJOZXY6FMHHLKXKANNI6TCY +# OTP URL: otpauth://totp/otptester@vyos?secret=J5A64ERPMGJOZXY6FMHHLKXKANNI6TCY&digits=6&period=30 +█████████████████████████████████████████████ +█████████████████████████████████████████████ +████ ▄▄▄▄▄ █▀█ █▄ ▀▄▀▄█▀▄ ▀█▀ █ ▄▄▄▄▄ ████ +████ █ █ █▀▀▀█ ▄▀ █▄▀ ▀▄ ▄ ▀ ▄█ █ █ ████ +████ █▄▄▄█ █▀ █▀▀██▄▄ █ █ ██ ▀▄▀ █ █▄▄▄█ ████ +████▄▄▄▄▄▄▄█▄▀ ▀▄█ █ ▀ █ █ █ █▄█▄█▄▄▄▄▄▄▄████ +████ ▄ █▄ ▄ ▀▄▀▀▀▀▄▀▄▀▄▄▄▀▀▄▄▄ █ █▄█ █████ +████▄▄ ██▀▄▄▄▀▀█▀ ▄ ▄▄▄ ▄▀ ▀ █ ▄ ▄ ██▄█ ████ +█████▄ ██▄▄▀█▄█▄█▄ ▀█▄▀▄ ▀█▀▄ █▄▄▄ ▄ ▄████ +████▀▀▄ ▄█▀▄▀ ▄█▀█▀▄▄▄▀█▄ ██▄▄▄ ▀█ █ ████ +████ ▄▀▄█▀▄▄█▀▀▄▀▀▀▀█ ▄▀▄▀ ▄█ ▀▄ ▄ ▄▀ █▄████ +████▄ ██ ▀▄▀▀ ▄█▀ ▄ ██ ▀█▄█ ▄█ ▄ ▀▄ ▄▄ ████ +████▄█▀▀▄ ▄▄ █▄█▄█▄ █▄▄▀▄▄▀▀▄▄██▀ ▄▀▄▄ ▀▄████ +████▀▄▀ ▄ ▄▀█ ▄ ▄█▀ █ ▀▄▄ ▄█▀ ▄▄ ▀▄▄ ████ +████ ▀███▄ █▄█▄▀▀▀▀▄ ▄█▄▄▀ ▀███ ▄▄█▄▄ ▄████ +████ ███▀ ▄▄▀▀██▀ ▄▀▄█▄▄▄ ██▄▄▀▄▀ ███▄ ▄████ +████▄████▄▄▄▀▄ █▄█▄▀▄▄▄▄██▀ ▄▀ ▄ ▄▄▄ █▄▄█████ +████ ▄▄▄▄▄ █▄▄▄ ▄█▀█▀▀▀▀█▀█▀ █▄█ █▄█ ▄█ ████ +████ █ █ █ ██▄▀▀▀▀▄▄▄▀ ▄▄▄ ▀ ▄ ▄ ▄▄████ +████ █▄▄▄█ █ ▀▀█▀ ▄▄█ █▄▄██▀▀█▀ █▄▀▄██▄█ ████ +████▄▄▄▄▄▄▄█▄█▄█▄█▄▄▄▄▄█▄▄▄█▄██████▄██▄▄▄████ +█████████████████████████████████████████████ +█████████████████████████████████████████████ +# To add this OTP key to configuration, run the following commands: +set system login user otptester authentication otp key 'J5A64ERPMGJOZXY6FMHHLKXKANNI6TCY' +set system login user otptester authentication otp rate-limit '2' +set system login user otptester authentication otp rate-time '20' +set system login user otptester authentication otp window-size '5' +``` + +Once a user has 2FA/OTP configured against their account, they must login +using their password with the OTP code appended to it. +For example: If the users password is vyosrocks and the OTP code is 817454 +then they would enter their password as vyosrocks817454 + +## RADIUS + +In large deployments it is not reasonable to configure each user individually +on every system. VyOS supports using {abbr}`RADIUS (Remote Authentication +Dial-In User Service)` servers as backend for user authentication. + +### Configuration + +```{eval-rst} +.. cfgcmd:: set system login radius server
key + + Specify the IP `
` of the RADIUS server user with the pre-shared-secret + given in ``. + + Multiple servers can be specified. +``` + +```{eval-rst} +.. cfgcmd:: set system login radius server
port + + Configure the discrete port under which the RADIUS server can be reached. + + This defaults to 1812. +``` + +```{eval-rst} +.. cfgcmd:: set system login radius server
disable + + Temporary disable this RADIUS server. It won't be queried. +``` + +```{eval-rst} +.. cfgcmd:: set system login radius server
timeout + + Setup the `` in seconds when querying the RADIUS server. +``` + +```{eval-rst} +.. cfgcmd:: set system login radius source-address
+ + RADIUS servers could be hardened by only allowing certain IP addresses to + connect. As of this the source address of each RADIUS query can be + configured. + + If unset, incoming connections to the RADIUS server will use the nearest + interface address pointing towards the server - making it error prone on + e.g. OSPF networks when a link fails and a backup route is taken. +``` + +```{eval-rst} +.. cfgcmd:: set system login radius vrf + + Source all connections to the RADIUS servers from given VRF ``. +``` + +:::{hint} +If you want to have admin users to authenticate via RADIUS it is +essential to sent the `Cisco-AV-Pair shell:priv-lvl=15` attribute. Without +the attribute you will only get regular, non privilegued, system users. +::: + +## TACACS+ + +In addition to {abbr}`RADIUS (Remote Authentication Dial-In User Service)`, +{abbr}`TACACS (Terminal Access Controller Access Control System)` can also be +found in large deployments. +VyOS only supports `Authentication` via `TACACS+` servers but does not support `Authorization` or `Accounting` yet + +TACACS is defined in {rfc}`8907`. + +(tacacs-configuration)= + +### Configuration + +```{eval-rst} +.. cfgcmd:: set system login tacas server
key + + Specify the IP `
` of the TACACS server user with the pre-shared-secret + given in ``. + + Multiple servers can be specified. +``` + +```{eval-rst} +.. cfgcmd:: set system login tacas server
port + + Configure the discrete port under which the TACACS server can be reached. + + This defaults to 49. +``` + +```{eval-rst} +.. cfgcmd:: set system login tacas server
disable + + Temporary disable this TACACS server. It won't be queried. +``` + +```{eval-rst} +.. cfgcmd:: set system login tacas server
timeout + + Setup the `` in seconds when querying the TACACS server. +``` + +```{eval-rst} +.. cfgcmd:: set system login tacas source-address
+ + TACACS servers could be hardened by only allowing certain IP addresses to + connect. As of this the source address of each TACACS query can be + configured. + + If unset, incoming connections to the TACACS server will use the nearest + interface address pointing towards the server - making it error prone on + e.g. OSPF networks when a link fails and a backup route is taken. +``` + +```{eval-rst} +.. cfgcmd:: set system login tacas vrf + + Source all connections to the TACACS servers from given VRF ``. + +``` + +## Login Banner + +You are able to set post-login or pre-login banner messages to display certain +information for this system. + +```{eval-rst} +.. cfgcmd:: set system login banner pre-login + + Configure `` which is shown during SSH connect and before a user is + logged in. +``` + +```{eval-rst} +.. cfgcmd:: set system login banner post-login + + Configure `` which is shown after user has logged in to the system. +``` + +:::{note} +To create a new line in your login message you need to escape the new +line character by using `\\n`. +::: + +## Limits + +Login limits + +```{eval-rst} +.. cfgcmd:: set system login max-login-session + + Set a limit on the maximum number of concurrent logged-in users on + the system. + + This option must be used with ``timeout`` option. +``` + +```{eval-rst} +.. cfgcmd:: set system login timeout + + Configure session timeout after which the user will be logged out. +``` + +## Example + +In the following example, both `User1` and `User2` will be able to SSH into +VyOS as user `vyos` using their very own keys. `User1` is restricted to only +be able to connect from a single IP address. In addition if password base login +is wanted for the `vyos` user a 2FA/MFA keycode is required in addition to +the password. + +```none +set system login user vyos authentication public-keys 'User1' key "AAAAB3Nz...KwEW" +set system login user vyos authentication public-keys 'User1' type ssh-rsa +set system login user vyos authentication public-keys 'User1' options "from="192.168.0.100"" + +set system login user vyos authentication public-keys 'User2' key "AAAAQ39x...fbV3" +set system login user vyos authentication public-keys 'User2' type ssh-rsa + +set system login user vyos authentication otp key OHZ3OJ7U2N25BK4G7SOFFJTZDTCFUUE2 +set system login user vyos authentication plaintext-password vyos +``` + +### TACACS Example + +We use a vontainer providing the TACACS serve rin this example. + +Load the container image in op-mode. + +```none +add container image lfkeitel/tacacs_plus:latest +``` + +```none +set container network tac-test prefix '100.64.0.0/24' + +set container name tacacs1 image 'lfkeitel/tacacs_plus:latest' +set container name tacacs1 network tac-test address '100.64.0.11' + +set container name tacacs2 image 'lfkeitel/tacacs_plus:latest' +set container name tacacs2 network tac-test address '100.64.0.12' + +set system login tacacs server 100.64.0.11 key 'tac_plus_key' +set system login tacacs server 100.64.0.12 key 'tac_plus_key' + +commit +``` + +You can now SSH into your system using admin/admin as a default user supplied +from the `lfkeitel/tacacs_plus:latest` container. diff --git a/docs/configuration/system/md-name-server.md b/docs/configuration/system/md-name-server.md new file mode 100644 index 00000000..9090ba5f --- /dev/null +++ b/docs/configuration/system/md-name-server.md @@ -0,0 +1,65 @@ +(system-dns)= + +# System DNS + +:::{warning} +If you are configuring a VRF for management purposes, there is +currently no way to force system DNS traffic via a specific VRF. +::: + +This section describes configuring DNS on the system, namely: + +> - DNS name servers +> - Domain search order + +## DNS name servers + +```{cfgcmd} set system name-server \ + +Use this command to specify a DNS server for the system to be used +for DNS lookups. More than one DNS server can be added, configuring +one at a time. Both IPv4 and IPv6 addresses are supported. +``` + + +### Example + +In this example, some *OpenNIC* servers are used, two IPv4 addresses +and two IPv6 addresses: + +```none +set system name-server 176.9.37.132 +set system name-server 195.10.195.195 +set system name-server 2a01:4f8:161:3441::1 +set system name-server 2a00:f826:8:2::195 +``` + + +## Domain search order + +In order for the system to use and complete unqualified host names, a +list can be defined which will be used for domain searches. + +```{cfgcmd} set system domain-search \ + +Use this command to define domains, one at a time, so that the system +uses them to complete unqualified host names. Maximum: 6 entries. +``` + +:::{note} +Domain names can include letters, numbers, hyphens and periods +with a maximum length of 253 characters. +::: + +(name-server-domain-search-order-example)= + +### Example + +The system is configured to attempt domain completion in the following +order: vyos.io (first), vyos.net (second) and vyos.network (last): + +```none +set system domain-search vyos.io +set system domain-search vyos.net +set system domain-search vyos.network +``` diff --git a/docs/configuration/system/md-option.md b/docs/configuration/system/md-option.md new file mode 100644 index 00000000..7fbf5d23 --- /dev/null +++ b/docs/configuration/system/md-option.md @@ -0,0 +1,186 @@ +(system-option)= + +# Option + +This chapter describe the possibilities of advanced system behavior. + +## General + +```{eval-rst} +.. cfgcmd:: set system option ctrl-alt-delete + + Action which will be run once the ctrl-alt-del keystroke is received. +``` + +```{eval-rst} +.. cfgcmd:: set system option reboot-on-panic + + Automatically reboot system on kernel panic after 60 seconds. +``` + +```{eval-rst} +.. cfgcmd:: set system option startup-beep + + Play an audible beep to the system speaker when system is ready. +``` + +```{eval-rst} +.. cfgcmd:: set system option root-partition-auto-resize + + Enables the root partition auto-extension and resizes to the maximum + available space on system boot. +``` + +### Kernel + +```{eval-rst} +.. cfgcmd:: set system option kernel disable-mitigations + + Disable all optional CPU mitigations. This improves system performance, + but it may also expose users to several CPU vulnerabilities. + + This will add the following option to the Kernel commandline: + + * ``mitigations=off`` + + .. note:: Setting will only become active with the next reboot! +``` + +```{eval-rst} +.. cfgcmd:: set system option kernel disable-power-saving + + This will add the following two options to the Kernel commandline: + + * ``intel_idle.max_cstate=0`` Disable intel_idle and fall back on acpi_idle + * ``processor.max_cstate=1`` Limit processor to maximum C-state 1 + + .. note:: Setting will only become active with the next reboot! +``` + +```{eval-rst} +.. cfgcmd:: set system option kernel amd-pstate-driver + + Enables and configures p-state driver for modern AMD Ryzen and Epyc CPUs. + + The available modes are: + + * ``active`` This is the low-level firmware control mode based on the profile + set and the system governor has no effect. + * ``passive`` The driver allows the system governor to manage CPU frequency + while providing available performance states. + * ``guided`` The driver allows to set desired performance levels and the firmware + selects a performance level in this range and fitting to the current workload. + + This will add the following two options to the Kernel commandline: + + * ``initcall_blacklist=acpi_cpufreq_init`` Disable default ACPI CPU frequency scale + * ``amd_pstate={mode}`` Sets the p-state mode + + .. note:: Setting will only become active with the next reboot! + + .. seealso:: https://docs.kernel.org/admin-guide/pm/amd-pstate.html +``` + +```{eval-rst} +.. cfgcmd:: set system option kernel quiet + + Suppress most kernel messages during boot. This is useful for systems with + embedded serial console interfaces to speed up the boot process. +``` + +## HTTP client + +```{eval-rst} +.. cfgcmd:: set system option http-client source-address
+ + Several commands utilize cURL to initiate transfers. Configure the local + source IPv4/IPv6 address used for all cURL operations. +``` + +```{eval-rst} +.. cfgcmd:: set system option http-client source-interface + + Several commands utilize curl to initiate transfers. Configure the local + source interface used for all CURL operations. +``` + +:::{note} +`source-address` and `source-interface` can not be used at the same +time. +::: + +## SSH client + +```{eval-rst} +.. cfgcmd:: set system option ssh-client source-address
+ + Use the specified address on the local machine as the source address of the + connection. Only useful on systems with more than one address. +``` + +```{eval-rst} +.. cfgcmd:: set system option ssh-client source-interface + + Use the address of the specified interface on the local machine as the + source address of the connection. +``` + +## Keyboard Layout + +When starting a VyOS live system (the installation CD) the configured keyboard +layout defaults to US. As this might not suite everyones use case you can adjust +the used keyboard layout on the system console. + +```{eval-rst} +.. cfgcmd:: set system option keyboard-layout + + Change system keyboard layout to given language. + + Defaults to ``us``. + + .. note:: Changing the keymap only has an effect on the system console, using + SSH or Serial remote access to the device is not affected as the keyboard + layout here corresponds to your access system. +``` + +(system-options-performance)= + +## Performance + +As more and more routers run on Hypervisors, expecially with a {abbr}`NOS +(Network Operating System)` as VyOS, it makes fewer and fewer sense to use +static resource bindings like `smp-affinity` as present in VyOS 1.2 and +earlier to pin certain interrupt handlers to specific CPUs. + +We now utilize `tuned` for dynamic resource balancing based on profiles. + + +```{eval-rst} +.. seealso:: https://access.redhat.com/sites/default/files/attachments/201501-perf-brief-low-latency-tuning-rhel7-v2.1.pdf +``` + + +```{eval-rst} +.. cfgcmd:: set system option performance < throughput | latency > + + Configure one of the predefined system performance profiles. + + * ``throughput``: A server profile focused on improving network throughput. + This profile favors performance over power savings by setting + ``intel_pstate`` and ``max_perf_pct=100`` and increasing kernel network + buffer sizes. + + It enables transparent huge pages, and uses cpupower to set the performance + cpufreq governor. It also sets ``kernel.sched_min_granularity_ns`` to 10 us, + ``kernel.sched_wakeup_granularity_ns`` to 15 uss, and ``vm.dirty_ratio`` to + 40%. + + * ``latency``: A server profile focused on lowering network latency. + This profile favors performance over power savings by setting + ``intel_pstate`` and ``min_perf_pct=100``. + + It disables transparent huge pages, and automatic NUMA balancing. It also + uses cpupower to set the performance cpufreq governor, and requests a + cpu_dma_latency value of 1. It also sets busy_read and busy_poll times to + 50 us, and tcp_fastopen to 3. +``` diff --git a/docs/configuration/system/md-proxy.md b/docs/configuration/system/md-proxy.md new file mode 100644 index 00000000..3b12634b --- /dev/null +++ b/docs/configuration/system/md-proxy.md @@ -0,0 +1,27 @@ +(system-proxy)= + +# System Proxy + +Some IT environments require the use of a proxy to connect to the Internet. +Without this configuration VyOS updates could not be installed directly by +using the {opcmd}`add system image` command ({ref}`update_vyos`). + +```{cfgcmd} set system proxy url \ + +Set proxy for all connections initiated by VyOS, including HTTP, HTTPS, and +FTP (anonymous ftp). +``` +```{cfgcmd} set system proxy port \ + +Configure proxy port if it does not listen to the default port 80. +``` +```{cfgcmd} set system proxy username \ + +Some proxies require/support the "basic" HTTP authentication scheme as per +{rfc}`7617`, thus a username can be configured. +``` +```{cfgcmd} set system proxy password \ + +Some proxies require/support the "basic" HTTP authentication scheme as per +{rfc}`7617`, thus a password can be configured. +``` \ No newline at end of file diff --git a/docs/configuration/system/md-sflow.md b/docs/configuration/system/md-sflow.md new file mode 100644 index 00000000..c63699db --- /dev/null +++ b/docs/configuration/system/md-sflow.md @@ -0,0 +1,71 @@ +# sFlow + +VyOS supports sFlow accounting for both IPv4 and IPv6 traffic. The system acts as a flow exporter, and you are free to use it with any compatible collector. + +sFlow is a technology that enables monitoring of network traffic by sending sampled packets to a collector device. + +The sFlow accounting based on hsflowd + +## Configuration + +```{eval-rst} +.. cfgcmd:: set system sflow agent-address
+ + Configure sFlow agent IPv4 or IPv6 address + +``` + +```{eval-rst} +.. cfgcmd:: set system sflow agent-interface + + Configure agent IP address associated with this interface. + +``` + +```{eval-rst} +.. cfgcmd:: set system sflow drop-monitor-limit + + Dropped packets reported on DROPMON Netlink channel by Linux kernel are exported via the standard sFlow v5 extension for reporting dropped packets +``` + +```{eval-rst} +.. cfgcmd:: set system sflow interface + + Configure and enable collection of flow information for the interface identified by . + + You can configure multiple interfaces which whould participate in sflow accounting. + +``` + +```{eval-rst} +.. cfgcmd:: set system sflow polling + + Configure schedule counter-polling in seconds (default: 30) +``` + +```{eval-rst} +.. cfgcmd:: set system sflow sampling-rate + + Use this command to configure the sampling rate for sFlow accounting (default: 1000) +``` + +```{eval-rst} +.. cfgcmd:: set system sflow server
port + + Configure address of sFlow collector. sFlow server at
can be both listening on an IPv4 or IPv6 address. + +``` + +## Example + +```none +set system sflow agent-address '192.0.2.14' +set system sflow agent-interface 'eth0' +set system sflow drop-monitor-limit '50' +set system sflow interface 'eth0' +set system sflow interface 'eth1' +set system sflow polling '30' +set system sflow sampling-rate '1000' +set system sflow server 192.0.2.1 port '6343' +set system sflow server 203.0.113.23 port '6343' +``` diff --git a/docs/configuration/system/md-sysctl.md b/docs/configuration/system/md-sysctl.md new file mode 100644 index 00000000..b815861b --- /dev/null +++ b/docs/configuration/system/md-sysctl.md @@ -0,0 +1,12 @@ +(sysctl)= + +# Sysctl + +This chapeter describes how to configure kernel parameters at runtime. + +`sysctl` is used to modify kernel parameters at runtime. The parameters +available are those listed under /proc/sys/. + +```{eval-rst} +.. cfgcmd:: set system sysctl parameter value +``` diff --git a/docs/configuration/system/md-syslog.md b/docs/configuration/system/md-syslog.md new file mode 100644 index 00000000..b4335c22 --- /dev/null +++ b/docs/configuration/system/md-syslog.md @@ -0,0 +1,365 @@ +(syslog)= + +# Syslog + +Per default VyOSs has minimal syslog logging enabled which is stored and +rotated locally. Errors will be always logged to a local file, which includes +`local7` error messages, emergency messages will be sent to the console, too. + +To configure syslog, you need to switch into configuration mode. + +## Logging + +Syslog supports logging to multiple targets, those targets could be a plain +file on your VyOS installation itself, a serial console or a remote syslog +server which is reached via {abbr}`IP (Internet Protocol)` UDP/TCP. + +### Console + +```{eval-rst} +.. cfgcmd:: set system syslog console facility level + + Log syslog messages to ``/dev/console``, for an explanation on + {ref}`syslog_facilities` keywords and {ref}`syslog_severity_level` keywords + see tables below. +``` + +(custom-file)= + +### Custom File + +```{eval-rst} +.. cfgcmd:: set system syslog file facility level + + Log syslog messages to file specified via ``, for an explanation on + {ref}`syslog_facilities` keywords and {ref}`syslog_severity_level` keywords + see tables below. +``` + +```{eval-rst} +.. cfgcmd:: set system syslog file archive size + + Syslog will write `` kilobytes into the file specified by ``. + After this limit has been reached, the custom file is "rotated" by logrotate + and a new custom file is created. +``` + +```{eval-rst} +.. cfgcmd:: set system syslog file archive file + + Syslog uses logrotate to rotate logiles after a number of gives bytes. + We keep as many as `` rotated file before they are deleted on the + system. + +``` + +### Remote Host + +Logging to a remote host leaves the local logging configuration intact, it +can be configured in parallel to a custom file or console logging. You can log +to multiple hosts at the same time, using either TCP or UDP. The default is +sending the messages via port 514/UDP. + +```{eval-rst} +.. cfgcmd:: set system syslog host
facility level + + Log syslog messages to remote host specified by `
`. The address + can be specified by either FQDN or IP address. For an explanation on + {ref}`syslog_facilities` keywords and {ref}`syslog_severity_level` + keywords see tables below. + +``` + +```{eval-rst} +.. cfgcmd:: set system syslog host
facility protocol + + + Configure protocol used for communication to remote syslog host. This can be + either UDP or TCP. + +``` + +```{eval-rst} +.. cfgcmd:: set system syslog vrf + + Specify name of the {abbr}`VRF (Virtual Routing and Forwarding)` instance. +``` + +#### {abbr}`TLS (Transport Layer Security)`-encrypted remote logging + +VyOS supports {abbr}`TLS (Transport Layer Security)`-encrypted remote logging +over TCP to ensure secure transmission of syslog data to remote syslog servers. + +**Prerequisites**: Before configuring {abbr}`TLS (Transport Layer +Security)`-encrypted remote logging, ensure you have: + +- A valid remote syslog server address. + +- Valid {abbr}`CA (Certificate Authority)` and client certificates uploaded + to the local {abbr}`PKI (Public Key Infrastructure)` storage. + +- The **remote syslog transport protocol** is set to **TCP**: + + ```none + set system syslog remote
protocol tcp + ``` + +:::{note} +{abbr}`TLS (Transport Layer Security)`-encrypted remote logging is +**not supported** over **UDP**. +::: + +```{eval-rst} +.. cfgcmd:: set system syslog remote
tls + + Enable TLS-encrypted remote logging. +``` + +```{eval-rst} +.. cfgcmd:: set system syslog remote
tls ca-certificate + + **Configure the** {abbr}`CA (Certificate Authority)` **certificate.** + + The syslog client uses the {abbr}`CA (Certificate Authority)` certificate to + verify the identity of the remote syslog server. + + The {abbr}`CA (Certificate Authority)` certificate is required for **all** + authentication modes except ``anon``. +``` + +```{eval-rst} +.. cfgcmd:: set system syslog remote
tls certificate + + **Configure the client certificate.** + + The remote syslog server uses the client certificate to verify the identity + of the syslog client. + + The client certificate is required if the remote syslog server enforces + client certificate verification. +``` + +```{eval-rst} +.. cfgcmd:: set system syslog remote
tls auth-mode + + **Configure the authentication mode.** + + The authentication mode defines how the syslog client verifies the syslog + server's identity. + + The following authentication modes are available: + + * ``anon`` **(default)**: Allows encrypted connections without verifying the syslog + server's identity. This mode is **not recommended**, as it is vulnerable to + {abbr}`MITM (Man-in-the-Middle)` attacks. + * ``fingerprint``: Verifies the server’s certificate fingerprint against the + value preconfigured with: + + .. code-block:: none + + set system syslog remote
tls permitted-peer + + * ``certvalid``: Verifies the server certificate is signed by a trusted + {abbr}`CA (Certificate Authority)`, skipping {abbr}`CN (Common Name)` check. + * ``name``: Verifies that: + + * The server’s certificate is signed by a trusted {abbr}`CA (Certificate + Authority)`. + * The {abbr}`CN (Common Name)` in the certificate matches the value + preconfigured with: + + .. code-block:: none + + set system syslog remote
tls permitted-peer + + This is a **recommended** secure mode for production environments. +``` + +```{eval-rst} +.. cfgcmd:: set system syslog remote
tls permitted-peer + + **Configure the peer certificate identifiers.** + + The certificate identifier format depends on the authentication mode: + + * ``fingerprint``: Enter the expected certificate fingerprints (SHA-1 or + SHA-256). + * ``name``: Enter the expected certificate {abbr}`CNs (Common Names)`. + + For ``anon`` and ``certvalid`` authentication modes, certificate identifiers + are not required. +``` + +#### Examples: + +```none +# Example of 'anon' authentication mode +set system syslog host 10.10.2.3 facility all level debug +set system syslog host 10.10.2.3 port 6514 +set system syslog host 10.10.2.3 protocol tcp +set system syslog host 10.10.2.3 tls auth-mode anon +# or just use 'set system syslog host 10.10.2.3 tls' + +# Example of 'certvalid' authentication mode +set system syslog host elk.example.com facility all level debug +set system syslog host elk.example.com port 6514 +set system syslog host elk.example.com protocol tcp +set system syslog host elk.example.com tls ca-certificate my-ca +set system syslog host elk.example.com tls auth-mode certvalid + +# Example of 'fingerprint' authentication mode +set system syslog host syslog.example.com facility all level debug +set system syslog host syslog.example.com port 6514 +set system syslog host syslog.example.com protocol tcp +set system syslog host syslog.example.com tls ca-certificate my-ca +set system syslog host syslog.example.com tls auth-mode fingerprint +set system syslog host syslog.example.com tls permitted-peer 'SHA1:10:C4:26:...' + +# Example of 'name' authentication mode +set system syslog host graylog.example.com facility all level debug +set system syslog host graylog.example.com port 6514 +set system syslog host graylog.example.com protocol tcp +set system syslog host graylog.example.com tls ca-certificate my-ca +set system syslog host graylog.example.com tls certificate syslog-client +set system syslog host graylog.example.com tls auth-mode name +set system syslog host graylog.example.com tls permitted-peer 'graylog.example.com' +``` + +#### Security Notes + +- Always prefer `auth-mode name` for secure deployments, as it ensures + both CA trust and server hostname validation. +- `anon` mode should only be used for testing, because it does not + authenticate the server. +- Ensure private keys are stored and managed exclusively in the + {doc}`PKI system `. + +### Local User Account + +```{eval-rst} +.. cfgcmd:: set system syslog user facility level + + If logging to a local user account is configured, all defined log messages + are display on the console if the local user is logged in, if the user is not + logged in, no messages are being displayed. For an explanation on + {ref}`syslog_facilities` keywords and {ref}`syslog_severity_level` keywords + see tables below. +``` + +(syslog_facilities)= + +## Facilities + +List of facilities used by syslog. Most facilities names are self explanatory. +Facilities local0 - local7 common usage is f.e. as network logs facilities for +nodes and network equipment. Generally it depends on the situation how to +classify logs and put them to facilities. See facilities more as a tool rather +than a directive to follow. + +Facilities can be adjusted to meet the needs of the user: + +| Facility Code | Keyword | Description | +| ------------- | -------- | ---------------------------------------- | +| | all | All facilities | +| 0 | kern | Kernel messages | +| 1 | user | User-level messages | +| 2 | mail | Mail system | +| 3 | daemon | System daemons | +| 4 | auth | Security/authentication messages | +| 5 | syslog | Messages generated internally by syslogd | +| 6 | lpr | Line printer subsystem | +| 7 | news | Network news subsystem | +| 8 | uucp | UUCP subsystem | +| 9 | cron | Clock daemon | +| 10 | security | Security/authentication messages | +| 11 | ftp | FTP daemon | +| 12 | ntp | NTP subsystem | +| 13 | logaudit | Log audit | +| 14 | logalert | Log alert | +| 15 | clock | clock daemon (note 2) | +| 16 | local0 | local use 0 (local0) | +| 17 | local1 | local use 1 (local1) | +| 18 | local2 | local use 2 (local2) | +| 19 | local3 | local use 3 (local3) | +| 20 | local4 | local use 4 (local4) | +| 21 | local5 | local use 5 (local5) | +| 22 | local6 | use 6 (local6) | +| 23 | local7 | local use 7 (local7) | + +(syslog_severity_level)= + +## Severity Level + +| Value | Severity | Keyword | Description | +| ----- | ------------- | ------- | ------------------------------------------------------------------------------------------------------------------------- | +| | | all | Log everything | +| 0 | Emergency | emerg | System is unusable - a panic condition | +| 1 | Alert | alert | Action must be taken immediately - A condition that should be corrected immediately, such as a corrupted system database. | +| 2 | Critical | crit | Critical conditions - e.g. hard drive errors. | +| 3 | Error | err | Error conditions | +| 4 | Warning | warning | Warning conditions | +| 5 | Notice | notice | Normal but significant conditions - conditions that are not error conditions, but that may require special handling. | +| 6 | Informational | info | Informational messages | +| 7 | Debug | debug | Debug-level messages - Messages that contain information normally of use only when debugging a program. | + +## Display Logs + +```{eval-rst} +.. opcmd:: show log [all | authorization | cluster | conntrack-sync | ...] + + Display log files of given category on the console. Use tab completion to get + a list of available categories. Thos categories could be: all, authorization, + cluster, conntrack-sync, dhcp, directory, dns, file, firewall, https, image + lldp, nat, openvpn, snmp, tail, vpn, vrrp +``` + +If no option is specified, this defaults to `all`. + +```{eval-rst} +.. opcmd:: show log image + [all | authorization | directory | file | tail ] + + Log messages from a specified image can be displayed on the console. Details + of allowed parameters: + + .. list-table:: + :widths: 25 75 + :header-rows: 0 + + * - all + - Display contents of all master log files of the specified image + * - authorization + - Display all authorization attempts of the specified image + * - directory + - Display list of all user-defined log files of the specified image + * - file + - Display contents of a specified user-defined log file of the specified + image + * - tail + - Display last lines of the system log of the specified image + * - + - Number of lines to be displayed, default 10 +``` + +When no options/parameters are used, the contents of the main syslog file are +displayed. + +:::{hint} +Use `show log | strip-private` if you want to hide private data +when sharing your logs. +::: + +## Delete Logs + +```{eval-rst} +.. opcmd:: delete log file +``` + +Deletes the specified user-defined file \ in the /var/log/user directory + +Note that deleting the log file does not stop the system from logging events. +If you use this command while the system is logging events, old log events +will be deleted, but events after the delete operation will be recorded in +the new file. To delete the file altogether, first delete logging to the +file using system syslog {ref}`custom-file` command, and then delete the file. diff --git a/docs/configuration/system/md-task-scheduler.md b/docs/configuration/system/md-task-scheduler.md new file mode 100644 index 00000000..378a648d --- /dev/null +++ b/docs/configuration/system/md-task-scheduler.md @@ -0,0 +1,48 @@ +(task-scheduler)= + +# Task Scheduler + +The task scheduler allows you to execute tasks on a given schedule. It makes +use of UNIX [cron]. + +:::{note} +All scripts excecuted this way are executed as root user - this may +be dangerous. Together with {ref}`command-scripting` this can be used for +automating (re-)configuration. +::: + +```{eval-rst} +.. cfgcmd:: set system task-scheduler task interval + + Specify the time interval when `` should be executed. The interval + is specified as number with one of the following suffixes: + + * ``none`` - Execution interval in minutes + * ``m`` - Execution interval in minutes + * ``h`` - Execution interval in hours + * ``d`` - Execution interval in days + + .. note:: If suffix is omitted, minutes are implied. +``` + +```{eval-rst} +.. cfgcmd:: set system task-scheduler task crontab-spec + + Set execution time in common cron_ time format. A cron `` of + ``30 */6 * * *`` would execute the `` at minute 30 past every 6th hour. +``` + +```{eval-rst} +.. cfgcmd:: set system task-scheduler task executable path + + Specify absolute `` to script which will be run when `` is + executed. +``` + +```{eval-rst} +.. cfgcmd:: set system task-scheduler task executable arguments + + Arguments which will be passed to the executable. +``` + +[cron]: https://en.wikipedia.org/wiki/Cron diff --git a/docs/configuration/system/md-time-zone.md b/docs/configuration/system/md-time-zone.md new file mode 100644 index 00000000..2279a773 --- /dev/null +++ b/docs/configuration/system/md-time-zone.md @@ -0,0 +1,17 @@ +(timezone)= + +# Time Zone + +Time Zone setting is very important as e.g all your logfile entries will be +based on the configured zone. Without proper time zone configuration it will +be very difficult to compare logfiles from different systems. + +```{cfgcmd} set system time-zone \ + +Specify the systems \ as the Region/Location that best defines +your location. For example, specifying US/Pacific sets the time zone to US +Pacific time. + +Command completion can be used to list available time zones. The adjustment +for daylight time will take place automatically based on the time of year. +``` \ No newline at end of file diff --git a/docs/configuration/system/md-updates.md b/docs/configuration/system/md-updates.md new file mode 100644 index 00000000..05a9d189 --- /dev/null +++ b/docs/configuration/system/md-updates.md @@ -0,0 +1,37 @@ +# Updates + +VyOS supports online checking for updates + +## Configuration + +```{eval-rst} +.. cfgcmd:: set system update-check auto-check + + Configure auto-checking for new images + +``` + +```{eval-rst} +.. cfgcmd:: set system update-check url + + Configure a URL that contains information about images. + +``` + +## Example + +```none +set system update-check auto-check +set system update-check url 'https://raw.githubusercontent.com/vyos/vyos-rolling-nightly-builds/main/version.json' +``` + +Check: + +```none +vyos@r4:~$ show system updates +Current version: 1.5-rolling-202312220023 + +Update available: 1.5-rolling-202312250024 +Update URL: https://github.com/vyos/vyos-rolling-nightly-builds/releases/download/1.5-rolling-202312250024/1.5-rolling-202312250024-amd64.iso +vyos@r4:~$ +``` -- cgit v1.2.3