From 1096cbcf95f96334d773ab98cce9d26d311f9e51 Mon Sep 17 00:00:00 2001 From: aapostoliuk Date: Tue, 5 Dec 2023 17:30:16 +0200 Subject: accel-ppp: T5688: Changing CLI to create client address pool Changing CLI to create client address pool --- docs/configuration/service/pppoe-server.rst | 59 +++++++++++------------------ docs/configuration/vpn/l2tp.rst | 12 +++--- docs/configuration/vpn/pptp.rst | 4 +- docs/configuration/vpn/sstp.rst | 15 +++++++- 4 files changed, 44 insertions(+), 46 deletions(-) (limited to 'docs/configuration') diff --git a/docs/configuration/service/pppoe-server.rst b/docs/configuration/service/pppoe-server.rst index 3a0adee7..a230d9fe 100644 --- a/docs/configuration/service/pppoe-server.rst +++ b/docs/configuration/service/pppoe-server.rst @@ -57,48 +57,35 @@ Client Address Pools -------------------- To automatically assign the client an IP address as tunnel endpoint, a -client IP pool is needed. The source can be either RADIUS or a local -subnet or IP range definition. - -Once the local tunnel endpoint ``set service pppoe-server gateway-address -'10.1.1.2'`` has been defined, the client IP pool can be either defined -as a range or as subnet using CIDR notation. If the CIDR notation is -used, multiple subnets can be setup which are used sequentially. +client IP pool is needed. The source can be either RADIUS or a +named pool. There is possibility to create multiple named pools. +Each named pool can include only one address range. To use multiple +address ranges configure ``next-pool`` option. **Client IP address via IP range definition** -.. cfgcmd:: set service pppoe-server client-ip-pool start
- - Use this command to define the first IP address of a pool of - addresses to be given to PPPoE clients. It must be within a /24 - subnet. - -.. cfgcmd:: set service pppoe-server client-ip-pool stop
- - Use this command to define the last IP address of a pool of - addresses to be given to PPPoE clients. It must be within a /24 - subnet. - -.. code-block:: none +.. cfgcmd:: set service pppoe-server client-ip-pool range - set service pppoe-server client-ip-pool start '10.1.1.100' - set service pppoe-server client-ip-pool stop '10.1.1.111' + Use this command to define the IP address range to be given + to PPPoE clients. If notation ``x.x.x.x-x.x.x.x``, + it must be within a /24 subnet. If notation ``x.x.x.x/x`` is + used there is possibility to set host/netmask. +.. cfgcmd:: set service pppoe-server client-ip-pool next-pool -**Client IP subnets via CIDR notation** + Use this command to define the next address pool name. -.. cfgcmd:: set service pppoe-server client-ip-pool subnet
+.. cfgcmd:: set service pppoe-server default-pool - Use this command for every pool of client IP addresses you want to - define. The addresses of this pool will be given to PPPoE clients. - You must use CIDR notation. + Use this command to define default address pool name. .. code-block:: none - set service pppoe-server client-ip-pool subnet '10.1.1.0/24' - set service pppoe-server client-ip-pool subnet '10.1.2.0/23' - set service pppoe-server client-ip-pool subnet '10.1.4.0/22' + set service pppoe-server client-ip-pool IP-POOL next-pool 'IP-POOL2' + set service pppoe-server client-ip-pool IP-POOL range '10.0.10.5/24' + set service pppoe-server client-ip-pool IP-POOL2 range '10.0.0.10-10.0.0.12' + set service pppoe-server default-pool 'IP-POOL' **RADIUS based IP pools (Framed-IP-Address)** @@ -213,8 +200,8 @@ For Local Users set service pppoe-server authentication local-users username foo rate-limit download '20480' set service pppoe-server authentication local-users username foo rate-limit upload '10240' set service pppoe-server authentication mode 'local' - set service pppoe-server client-ip-pool start '10.1.1.100' - set service pppoe-server client-ip-pool stop '10.1.1.111' + set service pppoe-server client-ip-pool IP-POOL range '10.1.1.100/24' + set service pppoe-server default-pool 'IP-POOL' set service pppoe-server name-server '10.100.100.1' set service pppoe-server name-server '10.100.200.1' set service pppoe-server interface 'eth1' @@ -367,8 +354,8 @@ address from the pool 10.1.1.100-111, terminates at the local endpoint set service pppoe-server access-concentrator 'ACN' set service pppoe-server authentication local-users username foo password 'bar' set service pppoe-server authentication mode 'local' - set service pppoe-server client-ip-pool start '10.1.1.100' - set service pppoe-server client-ip-pool stop '10.1.1.111' + set service pppoe-server client-ip-pool IP-POOL range '10.1.1.100-10.1.1.111' + set service pppoe-server default-pool 'IP-POOL' set service pppoe-server interface eth1 set service pppoe-server gateway-address '10.1.1.2' set service pppoe-server name-server '10.100.100.1' @@ -385,8 +372,8 @@ The example below covers a dual-stack configuration via pppoe-server. set service pppoe-server authentication local-users username test password 'test' set service pppoe-server authentication mode 'local' - set service pppoe-server client-ip-pool start '192.168.0.1' - set service pppoe-server client-ip-pool stop '192.168.0.10' + set service pppoe-server client-ip-pool IP-POOL range '192.168.0.1/24' + set service pppoe-server default-pool 'IP-POOL' set service pppoe-server client-ipv6-pool delegate '2001:db8:8003::/48' delegation-prefix '56' set service pppoe-server client-ipv6-pool prefix '2001:db8:8002::/48' mask '64' set service pppoe-server ppp-options ipv6 allow diff --git a/docs/configuration/vpn/l2tp.rst b/docs/configuration/vpn/l2tp.rst index 26de47b3..4a7657e7 100644 --- a/docs/configuration/vpn/l2tp.rst +++ b/docs/configuration/vpn/l2tp.rst @@ -17,8 +17,8 @@ with native Windows and Mac VPN clients): set vpn ipsec interface eth0 set vpn l2tp remote-access outside-address 192.0.2.2 - set vpn l2tp remote-access client-ip-pool start 192.168.255.2 - set vpn l2tp remote-access client-ip-pool stop 192.168.255.254 + set vpn l2tp remote-access client-ip-pool L2TP-POOL range 192.168.255.2-192.168.255.254 + set vpn l2tp remote-access default-pool 'L2TP-POOL' set vpn l2tp remote-access ipsec-settings authentication mode pre-shared-secret set vpn l2tp remote-access ipsec-settings authentication pre-shared-secret set vpn l2tp remote-access authentication mode local @@ -95,8 +95,8 @@ Below is an example to configure a LNS: .. code-block:: none set vpn l2tp remote-access outside-address 192.0.2.2 - set vpn l2tp remote-access client-ip-pool start 192.168.255.2 - set vpn l2tp remote-access client-ip-pool stop 192.168.255.254 + set vpn l2tp remote-access client-ip-pool L2TP-POOL range 192.168.255.2-192.168.255.254 + set vpn l2tp remote-access default-pool 'L2TP-POOL' set vpn l2tp remote-access lns shared-secret 'secret' set vpn l2tp remote-access ccp-disable set vpn l2tp remote-access authentication mode local @@ -122,8 +122,8 @@ The rate-limit is set in kbit/sec. .. code-block:: none set vpn l2tp remote-access outside-address 192.0.2.2 - set vpn l2tp remote-access client-ip-pool start 192.168.255.2 - set vpn l2tp remote-access client-ip-pool stop 192.168.255.254 + set vpn l2tp remote-access client-ip-pool L2TP-POOL range 192.168.255.2-192.168.255.254 + set vpn l2tp remote-access default-pool 'L2TP-POOL' set vpn l2tp remote-access authentication mode local set vpn l2tp remote-access authentication local-users username test password test set vpn l2tp remote-access authentication local-users username test rate-limit download 20480 diff --git a/docs/configuration/vpn/pptp.rst b/docs/configuration/vpn/pptp.rst index 12364acb..fe536eec 100644 --- a/docs/configuration/vpn/pptp.rst +++ b/docs/configuration/vpn/pptp.rst @@ -20,8 +20,8 @@ server example set vpn pptp remote-access authentication local-users username test password 'test' set vpn pptp remote-access authentication mode 'local' - set vpn pptp remote-access client-ip-pool start '192.168.0.10' - set vpn pptp remote-access client-ip-pool stop '192.168.0.15' + set vpn pptp remote-access client-ip-pool PPTP-POOL range 192.168.0.10-192.168.0.15 + set vpn pptp remote-access default-pool 'PPTP-POOL' set vpn pptp remote-access gateway-address '10.100.100.1' set vpn pptp remote-access outside-address '10.1.1.120' diff --git a/docs/configuration/vpn/sstp.rst b/docs/configuration/vpn/sstp.rst index f3e062fe..fa2b96c8 100644 --- a/docs/configuration/vpn/sstp.rst +++ b/docs/configuration/vpn/sstp.rst @@ -116,9 +116,20 @@ Configuration Specifies the port `` that the SSTP port will listen on (default 443). -.. cfgcmd:: set vpn sstp client-ip-pool subnet +.. cfgcmd:: set vpn sstp client-ip-pool range - Use `` as the IP pool for all connecting clients. + Use this command to define the first IP address of a pool of + addresses to be given to SSTP clients. If notation ``x.x.x.x-x.x.x.x``, + it must be within a /24 subnet. If notation ``x.x.x.x/x`` is + used there is possibility to set host/netmask. + +.. cfgcmd:: set vpn sstp client-ip-pool next-pool + + Use this command to define the next address pool name. + +.. cfgcmd:: set vpn sstp default-pool + + Use this command to define default address pool name. .. cfgcmd:: set vpn sstp client-ipv6-pool prefix
mask -- cgit v1.2.3