From b7e61a03f09b93cdaa91a3c6b13d967621483f5c Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Tue, 10 Nov 2020 20:02:47 +0100 Subject: interfaces: extend usage of new cmdinclude directive for bridge, bond, eth, peth, vxlan Commit c46473a ("docs: add ..cmdinclude:: directive") added support for including common text but only replacing individual labels so there can be source of truth also for the documentation. --- docs/interfaces/common-ipv6-addr-autoconf.txt | 12 ------------ 1 file changed, 12 deletions(-) delete mode 100644 docs/interfaces/common-ipv6-addr-autoconf.txt (limited to 'docs/interfaces/common-ipv6-addr-autoconf.txt') diff --git a/docs/interfaces/common-ipv6-addr-autoconf.txt b/docs/interfaces/common-ipv6-addr-autoconf.txt deleted file mode 100644 index 838b299f..00000000 --- a/docs/interfaces/common-ipv6-addr-autoconf.txt +++ /dev/null @@ -1,12 +0,0 @@ -:abbr:`SLAAC (Stateless Address Autoconfiguration)` -:rfc:`4862`. IPv6 hosts can configure themselves automatically when connected -to an IPv6 network using the Neighbor Discovery Protocol via :abbr:`ICMPv6 -(Internet Control Message Protocol version 6)` router discovery messages. -When first connected to a network, a host sends a link-local router -solicitation multicast request for its configuration parameters; routers -respond to such a request with a router advertisement packet that contains -Internet Layer configuration parameters. - -.. note:: This method automatically disables IPv6 traffic forwarding on the - interface in question. - -- cgit v1.2.3