From 269023845a5dcd936d406fbe1edc2edd45262a24 Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Thu, 28 Nov 2019 21:41:32 +0100 Subject: Refactor "code-block:: console" to "code-block:: none" --- docs/interfaces/ethernet.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'docs/interfaces/ethernet.rst') diff --git a/docs/interfaces/ethernet.rst b/docs/interfaces/ethernet.rst index c55f1c1c..cbefbaf6 100644 --- a/docs/interfaces/ethernet.rst +++ b/docs/interfaces/ethernet.rst @@ -6,7 +6,7 @@ Ethernet Ethernet interfaces allow for the configuration of speed, duplex, and hw-id (MAC address). Below is an example configuration: -.. code-block:: console +.. code-block:: none set interfaces ethernet eth1 address '192.168.0.1/24' set interfaces ethernet eth1 address '2001:db8:1::ffff/64' @@ -16,7 +16,7 @@ Ethernet interfaces allow for the configuration of speed, duplex, and hw-id Resulting in: -.. code-block:: console +.. code-block:: none ethernet eth1 { address 192.168.0.1/24 @@ -35,7 +35,7 @@ In addition, Ethernet interfaces provide the extended operational commands: Statistics available are driver dependent. -.. code-block:: console +.. code-block:: none vyos@vyos:~$ show interfaces ethernet eth0 physical Settings for eth0: -- cgit v1.2.3