From 2f00035cee09ffa7efe9c86dd0d59089fffe9de8 Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Fri, 10 Apr 2020 13:07:02 +0200 Subject: vxlan: adjust to latest CLI (rename link to source-interface) --- docs/interfaces/vxlan.rst | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'docs') diff --git a/docs/interfaces/vxlan.rst b/docs/interfaces/vxlan.rst index 409131e1..a11f4b62 100644 --- a/docs/interfaces/vxlan.rst +++ b/docs/interfaces/vxlan.rst @@ -69,7 +69,16 @@ Address set interfaces vxlan vxlan0 ipv6 address eui64 2001:db8:beef::/64 -.. cfgcmd:: set interfaces vxlan link +.. cfgcmd:: set interfaces vxlan vni + + Each VXLAN segment is identified through a 24-bit segment ID, termed the + :abbr:`VNI (VXLAN Network Identifier (or VXLAN Segment ID))`, This allows + up to 16M VXLAN segments to coexist within the same administrative domain. + +Multicast +^^^^^^^^^ + +.. cfgcmd:: set interfaces vxlan source-interface Interface used for VXLAN underlay. This is mandatory when using VXLAN via a multicast network. VXLAN traffic will always enter and exit this interface. @@ -82,6 +91,8 @@ Address Both IPv4 and IPv6 multicast is possible. +Unicast +^^^^^^^ .. cfgcmd:: set interfaces vxlan remote
@@ -97,12 +108,13 @@ Address as the default IANA-assigned destination UDP port number. Instead VyOS uses the Linux default port of 8472. +L2VVPN / EVPN +^^^^^^^^^^^^^ -.. cfgcmd:: set interfaces vxlan vni +.. cfgcmd:: set interfaces vxlan source-address - Each VXLAN segment is identified through a 24-bit segment ID, termed the - :abbr:`VNI (VXLAN Network Identifier (or VXLAN Segment ID))`, This allows - up to 16M VXLAN segments to coexist within the same administrative domain. + Source IP address used for VXLAN underlay. This is mandatory when using + VXLAN via L2VPN/EVPN. Link Administration -- cgit v1.2.3