.. _examples-site-2-site-cisco:
Site-to-Site IPSec VPN to Cisco using FlexVPN
---------------------------------------------
This guide shows a sample configuration for FlexVPN site-to-site Internet
Protocol Security (IPsec)/Generic Routing Encapsulation (GRE) tunnel.
FlexVPN is a newer "solution" for deployment of VPNs and it utilizes IKEv2 as
the key exchange protocol. The result is a flexible and scalable VPN solution
that can be easily adapted to fit various network needs. It can also support a
variety of encryption methods, including AES and 3DES.
The lab was built using EVE-NG.
Configuration
^^^^^^^^^^^^^^
VyOS
=====
- GRE:
.. code-block:: none
set interfaces tunnel tun1 encapsulation 'gre'
set interfaces tunnel tun1 ip adjust-mss '1336'
set interfaces tunnel tun1 mtu '1376'
set interfaces tunnel tun1 remote '10.1.1.6'
set interfaces tunnel tun1 source-address '88.2.2.1'
- IPsec:
.. code-block:: none
set vpn ipsec authentication psk vyos_cisco_l id 'vyos.net’
set vpn ipsec authentication psk vyos_cisco_l id 'cisco.hub.net'
set vpn ipsec authentication psk vyos_cisco_l secret 'secret'
set vpn ipsec esp-group e1 lifetime '3600'
set vpn ipsec esp-group e1 mode 'tunnel'
set vpn ipsec esp-group e1 pfs 'disable'
set vpn ipsec esp-group e1 proposal 1 encryption 'aes128'
set vpn ipsec esp-group e1 proposal 1 hash 'sha256'
set vpn ipsec ike-group i1 key-exchange 'ikev2'
set vpn ipsec ike-group i1 lifetime '28800'
set vpn ipsec ike-group i1 proposal 1 dh-group '5'
set vpn ipsec ike-group i1 proposal 1 encryption 'aes256'
set vpn ipsec ike-group i1 proposal 1 hash 'sha256'
set vpn ipsec interface 'eth2'
set vpn ipsec options disable-route-autoinstall
set vpn ipsec options flexvpn
set vpn ipsec options interface 'tun1'
set vpn ipsec options virtual-ip
set vpn ipsec site-to-site peer cisco_hub authentication local-id 'vyos.net'
set vpn ipsec site-to-site peer cisco_hub authentication mode 'pre-shared-secret'
set vpn ipsec site-to-site peer cisco_hub authentication remote-id 'cisco.hub.net'
set vpn ipsec site-to-site peer cisco_hub connection-type 'initiate'
set vpn ipsec site-to-site peer cisco_hub default-esp-group 'e1'
set vpn ipsec site-to-site peer cisco_hub ike-group 'i1'
set vpn ipsec site-to-site peer cisco_hub local-address '88.2.2.1'
set vpn ipsec site-to-site peer cisco_hub remote-address '10.1.1.6'
set vpn ipsec site-to-site peer cisco_hub tunnel 1 local prefix '88.2.2.1/32'
set vpn ipsec site-to-site peer cisco_hub tunnel 1 protocol 'gre'
set vpn ipsec site-to-site peer cisco_hub tunnel 1 remote prefix '10.1.1.6/32'
set vpn ipsec site-to-site peer cisco_hub virtual-address '0.0.0.0'
Cisco
=====
.. code-block:: none
aaa new-model
!
!
aaa authorization network default local
!
crypto ikev2 name-mangler GET_DOMAIN
fqdn all
email all
!
!
crypto ikev2 authorization policy vyos
pool mypool
aaa attribute list mylist
route set interface
route accept any tag 100 distance 5
!
crypto ikev2 keyring mykeys
peer peer1
identity fqdn vyos.net
pre-shared-key local secret
pre-shared-key remote secret
crypto ikev2 profile my_profile
match identity remote fqdn vyos.net
identity local fqdn cisco.hub.net
authentication remote pre-share
authentication local pre-share
keyring local mykeys
dpd 10 3 periodic
aaa authorization group psk list local name-mangler GET_DOMAIN
aaa authorization user psk cached
virtual-template 1
!
!
!
crypto ipsec transform-set TSET esp-aes esp-sha256-hmac
mode tunnel
!
!
crypto ipsec profile my-ipsec-profile
set transform-set TSET
set ikev2-profile my_profile
!
interface Virtual-Template1 type tunnel
no ip address
ip mtu 1376
ip nhrp network-id 1
ip nhrp shortcut virtual-template 1
ip tcp adjust-mss 1336
tunnel path-mtu-discovery
tunnel protection ipsec profile my-ipsec-profile
!
ip local pool my_pool 172.16.122.1 172.16.122.254
Since the tunnel is a point-to-point GRE tunnel, it behaves like any other
point-to-point interface (for example: serial, dialer), and it is possible to
run any Interior Gateway Protocol (IGP)/Exterior Gateway Protocol (EGP) over
the link in order to exchange routing information
Verification
^^^^^^^^^^^^
.. code-block:: none
vyos@vyos$ show interfaces
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address S/L Description
--------- ---------- --- -----------
eth0 - u/u
eth1 - u/u
eth2 88.2.2.1/24 u/u
eth3 172.16.1.2/24 u/u
lo 127.0.0.1/8 u/u
::1/128
tun1 172.16.122.2/32 u/u
vyos@vyos:~$ show vpn ipsec sa
Connection State Uptime Bytes In/Out Packets In/Out Remote address Remote ID Proposal
------------------ ------- -------- -------------- ---------------- ---------------- --------------------- -----------------------------
cisco_hub-tunnel-1 up 44m17s 35K/31K 382/367 10.1.1.6 cisco.hub.net AES_CBC_128/HMAC_SHA2_256_128
Hub#sh crypto ikev2 sa detailed
IPv4 Crypto IKEv2 SA
Tunnel-id Local Remote fvrf/ivrf Status
5 10.1.1.6/4500 88.2.2.1/4500 none/none READY
Encr: AES-CBC, keysize: 256, PRF: SHA256, Hash: SHA256, DH Grp:5, Auth sign: PSK, Auth verify: PSK
Life/Active Time: 86400/2694 sec
CE id: 0, Session-id: 2
Status Description: Negotiation done
Local spi: C94EE2DC92A60C47 Remote spi: 9AF0EF151BECF14C
Local id: cisco.hub.net
Remote id: vyos.net
Local req msg id: 269 Remote req msg id: 0
Local next msg id: 269 Remote next msg id: 0
Local req queued: 269 Remote req queued: 0
Local window: 5 Remote window: 1
DPD configured for 10 seconds, retry 3
Fragmentation not configured.
Extended Authentication not configured.
NAT-T is not detected
Cisco Trust Security SGT is disabled
Assigned host addr: 172.16.122.2