######## RSA-Keys ######## RSA can be used for services such as key exchanges and for encryption purposes. To make IPSec work with dynamic address on one/both sides, we will have to use RSA keys for authentication. They are very fast and easy to setup. First, on both routers run the operational command "generate pki key-pair install >". You may choose different length than 2048 of course. .. code-block:: none vyos@left# run generate pki key-pair install ipsec-LEFT Enter private key type: [rsa, dsa, ec] (Default: rsa) Enter private key bits: (Default: 2048) Note: If you plan to use the generated key on this router, do not encrypt the private key. Do you want to encrypt the private key with a passphrase? [y/N] N Configure mode commands to install key pair: Do you want to install the public key? [Y/n] Yrgerg set pki key-pair ipsec-LEFT public key 'MIIBIjANBgkqh...' Do you want to install the private key? [Y/n] Y set pki key-pair ipsec-LEFT private key 'MIIEvgIBADAN...' [edit] Configuration commands will display. Note the command with the public key (set pki key-pair ipsec-LEFT public key 'MIIBIjANBgkqh...'). Then do the same on the opposite router: .. code-block:: none vyos@left# run generate pki key-pair install ipsec-RIGHT Note the command with the public key (set pki key-pair ipsec-RIGHT public key 'FAAOCAQ8AMII...'). The noted public keys should be entered on the opposite routers. On the LEFT: .. code-block:: none set pki key-pair ipsec-RIGHT public key 'FAAOCAQ8AMII...' On the RIGHT: .. code-block:: none set pki key-pair ipsec-LEFT public key 'MIIBIjANBgkqh...' Now you are ready to setup IPsec. The key points: 1. Since both routers do not know their effective public addresses, we set the local-address of the peer to "any". 2. On the initiator, we set the peer address to its public address, but on the responder we only set the id. 3. On the initiator, we need to set the remote-id option so that it can identify IKE traffic from the responder correctly. 4. On the responder, we need to set the local id so that initiator can know who's talking to it for the point #3 to work. On the LEFT (static address): .. code-block:: none set vpn ipsec interface eth0 set vpn ipsec esp-group MyESPGroup proposal 1 encryption aes128 set vpn ipsec esp-group MyESPGroup proposal 1 hash sha1 set vpn ipsec ike-group MyIKEGroup proposal 1 dh-group 2 set vpn ipsec ike-group MyIKEGroup proposal 1 encryption aes128 set vpn ipsec ike-group MyIKEGroup proposal 1 hash sha1 set vpn ipsec site-to-site peer @RIGHT authentication id LEFT set vpn ipsec site-to-site peer @RIGHT authentication mode rsa set vpn ipsec site-to-site peer @RIGHT authentication rsa local-key ipsec-LEFT set vpn ipsec site-to-site peer @RIGHT authentication rsa remote-key ipsec-RIGHT set vpn ipsec site-to-site peer @RIGHT authentication remote-id RIGHT set vpn ipsec site-to-site peer @RIGHT default-esp-group MyESPGroup set vpn ipsec site-to-site peer @RIGHT ike-group MyIKEGroup set vpn ipsec site-to-site peer @RIGHT local-address 192.0.2.10 set vpn ipsec site-to-site peer @RIGHT connection-type respond set vpn ipsec site-to-site peer @RIGHT tunnel 1 local prefix 192.168.99.1/32 # Additional loopback address on the local set vpn ipsec site-to-site peer @RIGHT tunnel 1 remote prefix 192.168.99.2/32 # Additional loopback address on the remote On the RIGHT (dynamic address): .. code-block:: none set vpn ipsec interface eth0 set vpn ipsec esp-group MyESPGroup proposal 1 encryption aes128 set vpn ipsec esp-group MyESPGroup proposal 1 hash sha1 set vpn ipsec ike-group MyIKEGroup proposal 1 dh-group 2 set vpn ipsec ike-group MyIKEGroup proposal 1 encryption aes128 set vpn ipsec ike-group MyIKEGroup proposal 1 hash sha1 set vpn ipsec site-to-site peer 192.0.2.10 authentication id RIGHT set vpn ipsec site-to-site peer 192.0.2.10 authentication mode rsa set vpn ipsec site-to-site peer 192.0.2.10 authentication rsa local-key ipsec-RIGHT set vpn ipsec site-to-site peer 192.0.2.10 authentication rsa remote-key ipsec-LEFT set vpn ipsec site-to-site peer 192.0.2.10 authentication remote-id LEFT set vpn ipsec site-to-site peer 192.0.2.10 connection-type initiate set vpn ipsec site-to-site peer 192.0.2.10 default-esp-group MyESPGroup set vpn ipsec site-to-site peer 192.0.2.10 ike-group MyIKEGroup set vpn ipsec site-to-site peer 192.0.2.10 local-address any set vpn ipsec site-to-site peer 192.0.2.10 tunnel 1 local prefix 192.168.99.2/32 # Additional loopback address on the local set vpn ipsec site-to-site peer 192.0.2.10 tunnel 1 remote prefix 192.168.99.1/32 # Additional loopback address on the remote