path: root/docs/configuration/firewall/bridge.rst

:lastproofread: 2024-07-03

.. _firewall-configuration:

#############################
Bridge Firewall Configuration
#############################

.. note:: **Documentation under development**

********
Overview
********

In this section there's useful information on all firewall configuration that
can be done regarding bridges, and appropriate op-mode commands.
Configuration commands covered in this section:

.. cfgcmd:: set firewall bridge ...

From the main structure defined in :doc:`Firewall Overview</configuration/firewall/index>`
in this section you can find detailed information only for the next part
of the general structure:

.. code-block:: none

   - set firewall
       * bridge
            - forward
               + filter
            - name
               + custom_name

Traffic which is received by the router on an interface which is member of a
bridge is processed on the **Bridge Layer**. A simplified packet flow diagram
for this layer is shown next:

.. figure:: /_static/images/firewall-bridge-packet-flow.png

For traffic that needs to be forwarded internally by the bridge, base chain is
is **forward**, and it's base command for filtering is ``set firewall bridge
forward filter ...``, which happens in stage 4, highlighted with red color.

Custom bridge firewall chains can be created with the command ``set firewall bridge
name <name> ...``. In order to use such custom chain, a rule with action jump,
and the appropriate target should be defined in a base chain.

.. note:: **Layer 3 bridge**:
      When an IP address is assigned to the bridge interface, and if traffic
      is sent to the router to this IP (for example using such IP as
      default gateway), then rules defined for **bridge firewall** won't
      match, and firewall analysis continues at **IP layer**.

************
Bridge Rules
************

For firewall filtering, firewall rules need to be created. Each rule is
numbered, has an action to apply if the rule is matched, and the ability
to specify multiple matching criteria. Data packets go through the rules
from 1 - 999999, so order is crucial. At the first match the action of the
rule will be executed.

Actions
=======

If a rule is defined, then an action must be defined for it. This tells the
firewall what to do if all matching criterea in the rule are met.

In firewall bridge rules, the action can be:

   * ``accept``: accept the packet.

   * ``continue``: continue parsing next rule.

   * ``drop``: drop the packet.

   * ``jump``: jump to another custom chain.

   * ``return``: Return from the current chain and continue at the next rule
     of the last chain.

   * ``queue``: Enqueue packet to userspace.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999> action
   [accept | continue | drop | jump | queue | return]
.. cfgcmd:: set firewall bridge name <name> rule <1-999999> action
   [accept | continue | drop | jump | queue | return]

   This required setting defines the action of the current rule. If action is
   set to jump, then jump-target is also needed.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   jump-target <text>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   jump-target <text>

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   queue <0-65535>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   queue <0-65535>

   To be used only when action is set to ``queue``. Use this command to specify
   the queue target to use. Queue range is also supported.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   queue-options bypass
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   queue-options bypass

   To be used only when action is set to ``queue``. Use this command to let
   packet go through firewall when no userspace software is connected to the
   queue.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   queue-options fanout
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   queue-options fanout

   To be used only when action is set to ``queue``. Use this command to
   distribute packets between several queues.

Also, **default-action** is an action that takes place whenever a packet does
not match any rule in its' chain. For base chains, possible options for
**default-action** are **accept** or **drop**.

.. cfgcmd:: set firewall bridge forward filter default-action
   [accept | drop]
.. cfgcmd:: set firewall bridge name <name> default-action
   [accept | continue | drop | jump | queue | return]

   This sets the default action of the rule-set if a packet does not match
   any of the rules in that chain. If default-action is set to ``jump``, then
   ``default-jump-target`` is also needed. Note that for base chains, default
   action can only be set to ``accept`` or ``drop``, while on custom chains
   more actions are available.

.. cfgcmd:: set firewall bridge name <name> default-jump-target <text>

   To be used only when ``default-action`` is set to ``jump``. Use this
   command to specify jump target for default rule.

.. note:: **Important note about default-actions:**
   If the default action for any base chain is not defined, then the default
   action is set to **accept** for that chain. For custom chains, if the 
   default action is not defined, then the default-action is set to **drop**.

Firewall Logs
=============

Logging can be enable for every single firewall rule. If enabled, other
log options can be defined.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999> log
.. cfgcmd:: set firewall bridge name <name> rule <1-999999> log

   Enable logging for the matched packet. If this configuration command is not
   present, then the log is not enabled.

.. cfgcmd:: set firewall bridge forward filter default-log
.. cfgcmd:: set firewall bridge name <name> default-log

   Use this command to enable the logging of the default action on
   the specified chain.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   log-options level [emerg | alert | crit | err | warn | notice
   | info | debug]
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   log-options level [emerg | alert | crit | err | warn | notice
   | info | debug]

   Define log-level. Only applicable if rule log is enabled.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   log-options group <0-65535>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   log-options group <0-65535>

   Define the log group to send messages to. Only applicable if rule log is
   enabled.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   log-options snapshot-length <0-9000>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   log-options snapshot-length <0-9000>

   Define length of packet payload to include in netlink message. Only
   applicable if rule log is enabled and the log group is defined.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   log-options queue-threshold <0-65535>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   log-options queue-threshold <0-65535>

   Define the number of packets to queue inside the kernel before sending them
   to userspace. Only applicable if rule log is enabled and the log group is 
   defined.

Firewall Description
====================

For reference, a description can be defined for every defined custom chain.

.. cfgcmd:: set firewall bridge name <name> description <text>

   Provide a rule-set description to a custom firewall chain.

Rule Status
===========

When defining a rule, it is enabled by default. In some cases, it is useful to
just disable the rule, rather than removing it.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999> disable
.. cfgcmd:: set firewall bridge name <name> rule <1-999999> disable

   Command for disabling a rule but keep it in the configuration.

Matching criteria
=================

There are a lot of matching criteria against which the packet can be tested.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   destination mac-address <mac-address>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   destination mac-address <mac-address>
.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   source mac-address <mac-address>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   source mac-address <mac-address>

   Match criteria based on source and/or destination mac-address.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   inbound-interface name <iface>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   inbound-interface name <iface>

   Match based on inbound interface. Wildcard ``*`` can be used.
   For example: ``eth2*``. Prepending character ``!`` for inverted matching
   criteria is also supported. For example ``!eth2``

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   inbound-interface group <iface_group>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   inbound-interface group <iface_group>

   Match based on inbound interface group. Prepending character ``!`` for
   inverted matching criteria is also supported. For example ``!IFACE_GROUP``

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   outbound-interface name <iface>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   outbound-interface name <iface>

   Match based on outbound interface. Wildcard ``*`` can be used.
   For example: ``eth2*``. Prepending character ``!`` for inverted matching
   criteria is also supported. For example ``!eth2``

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   outbound-interface group <iface_group>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   outbound-interface group <iface_group>

   Match based on outbound interface group. Prepending character ``!`` for
   inverted matching criteria is also supported. For example ``!IFACE_GROUP``

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   vlan id <0-4096>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   vlan id <0-4096>

   Match based on vlan ID. Range is also supported.

.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
   vlan priority <0-7>
.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
   vlan priority <0-7>

   Match based on vlan priority(pcp). Range is also supported.

***********************
Operation-mode Firewall
***********************

Rule-set overview
=================

In this section you can find all useful firewall op-mode commands.

General commands for firewall configuration, counter and statistics:

.. opcmd:: show firewall
.. opcmd:: show firewall summary
.. opcmd:: show firewall statistics

And, to print only bridge firewall information:

.. opcmd:: show firewall bridge
.. opcmd:: show firewall bridge forward filter
.. opcmd:: show firewall bridge forward filter rule <rule>
.. opcmd:: show firewall bridge name <name>
.. opcmd:: show firewall bridge name <name> rule <rule>

Show Firewall log
=================

.. opcmd:: show log firewall
.. opcmd:: show log firewall bridge
.. opcmd:: show log firewall bridge forward
.. opcmd:: show log firewall bridge forward filter
.. opcmd:: show log firewall bridge name <name>
.. opcmd:: show log firewall bridge forward filter rule <rule>
.. opcmd:: show log firewall bridge name <name> rule <rule>

   Show the logs of all firewall; show all bridge firewall logs; show all logs
   for forward hook; show all logs for forward hook and priority filter; show
   all logs for particular custom chain; show logs for specific Rule-Set.

Example
=======

Configuration example:

.. code-block:: none

   set firewall bridge forward filter default-action 'drop'
   set firewall bridge forward filter default-log
   set firewall bridge forward filter rule 10 action 'continue'
   set firewall bridge forward filter rule 10 inbound-interface name 'eth2'
   set firewall bridge forward filter rule 10 vlan id '22'
   set firewall bridge forward filter rule 20 action 'drop'
   set firewall bridge forward filter rule 20 inbound-interface group 'TRUNK-RIGHT'
   set firewall bridge forward filter rule 20 vlan id '60'
   set firewall bridge forward filter rule 30 action 'jump'
   set firewall bridge forward filter rule 30 jump-target 'TEST'
   set firewall bridge forward filter rule 30 outbound-interface name '!eth1'
   set firewall bridge forward filter rule 35 action 'accept'
   set firewall bridge forward filter rule 35 vlan id '11'
   set firewall bridge forward filter rule 40 action 'continue'
   set firewall bridge forward filter rule 40 destination mac-address '66:55:44:33:22:11'
   set firewall bridge forward filter rule 40 source mac-address '11:22:33:44:55:66'
   set firewall bridge name TEST default-action 'accept'
   set firewall bridge name TEST default-log
   set firewall bridge name TEST rule 10 action 'continue'
   set firewall bridge name TEST rule 10 log
   set firewall bridge name TEST rule 10 vlan priority '0'

And op-mode commands:

.. code-block:: none

      vyos@BRI:~$ show firewall bridge
      Rulesets bridge Information

      ---------------------------------
      bridge Firewall "forward filter"

      Rule     Action    Protocol      Packets    Bytes  Conditions
      -------  --------  ----------  ---------  -------  ---------------------------------------------------------------------
      10       continue  all                 0        0  iifname "eth2" vlan id 22  continue
      20       drop      all                 0        0  iifname @I_TRUNK-RIGHT vlan id 60
      30       jump      all              2130   170688  oifname != "eth1"  jump NAME_TEST
      35       accept    all              2080   168616  vlan id 11  accept
      40       continue  all                 0        0  ether daddr 66:55:44:33:22:11 ether saddr 11:22:33:44:55:66  continue
      default  drop      all                 0        0

      ---------------------------------
      bridge Firewall "name TEST"

      Rule     Action    Protocol      Packets    Bytes  Conditions
      -------  --------  ----------  ---------  -------  --------------------------------------------------
      10       continue  all              2130   170688  vlan pcp 0  prefix "[bri-NAM-TEST-10-C]"  continue
      default  accept    all              2130   170688

      vyos@BRI:~$
      vyos@BRI:~$ show firewall bridge name TEST
      Ruleset Information

      ---------------------------------
      bridge Firewall "name TEST"

      Rule     Action    Protocol      Packets    Bytes  Conditions
      -------  --------  ----------  ---------  -------  --------------------------------------------------
      10       continue  all              2130   170688  vlan pcp 0  prefix "[bri-NAM-TEST-10-C]"  continue
      default  accept    all              2130   170688

      vyos@BRI:~$

Inspect logs:

.. code-block:: none

      vyos@BRI:~$ show log firewall bridge
      Dec 05 14:37:47 kernel: [bri-NAM-TEST-10-C]IN=eth1 OUT=eth2 ARP HTYPE=1 PTYPE=0x0800 OPCODE=1 MACSRC=50:00:00:04:00:00 IPSRC=10.11.11.101 MACDST=00:00:00:00:00:00 IPDST=10.11.11.102
      Dec 05 14:37:48 kernel: [bri-NAM-TEST-10-C]IN=eth1 OUT=eth2 ARP HTYPE=1 PTYPE=0x0800 OPCODE=1 MACSRC=50:00:00:04:00:00 IPSRC=10.11.11.101 MACDST=00:00:00:00:00:00 IPDST=10.11.11.102
      Dec 05 14:37:49 kernel: [bri-NAM-TEST-10-C]IN=eth1 OUT=eth2 ARP HTYPE=1 PTYPE=0x0800 OPCODE=1 MACSRC=50:00:00:04:00:00 IPSRC=10.11.11.101 MACDST=00:00:00:00:00:00 IPDST=10.11.11.102
      ...
      vyos@BRI:~$ show log firewall bridge forward filter
      Dec 05 14:42:22 kernel: [bri-FWD-filter-default-D]IN=eth2 OUT=eth1 MAC=33:33:00:00:00:16:50:00:00:06:00:00:86:dd SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=96 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=ICMPv6 TYPE=143 CODE=0
      Dec 05 14:42:22 kernel: [bri-FWD-filter-default-D]IN=eth2 OUT=eth1 MAC=33:33:00:00:00:16:50:00:00:06:00:00:86:dd SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=96 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=ICMPv6 TYPE=143 CODE=0