blob: c55f1c1c36c0d307c716f1baf44f46608c84061f (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
|
.. _ethernet-interface:
Ethernet
--------
Ethernet interfaces allow for the configuration of speed, duplex, and hw-id
(MAC address). Below is an example configuration:
.. code-block:: console
set interfaces ethernet eth1 address '192.168.0.1/24'
set interfaces ethernet eth1 address '2001:db8:1::ffff/64'
set interfaces ethernet eth1 description 'INSIDE'
set interfaces ethernet eth1 duplex 'auto'
set interfaces ethernet eth1 speed 'auto'
Resulting in:
.. code-block:: console
ethernet eth1 {
address 192.168.0.1/24
address 2001:db8:1::ffff/64
description INSIDE
duplex auto
hw-id 00:0c:29:44:3b:19
smp_affinity auto
speed auto
}
In addition, Ethernet interfaces provide the extended operational commands:
* ``show interfaces ethernet <name> physical``
* ``show interfaces ethernet <name> statistics``
Statistics available are driver dependent.
.. code-block:: console
vyos@vyos:~$ show interfaces ethernet eth0 physical
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
driver: e1000
version: 7.3.21-k8-NAPI
firmware-version:
bus-info: 0000:02:01.0
vyos@vyos:~$ show interfaces ethernet eth0 statistics
NIC statistics:
rx_packets: 3530
tx_packets: 2179
[...]
|
