blob: 71f8df2823c9d4c91d896f024cd3ae882ec2b2ab (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
|
.. _wwan-interface:
####################
WirelessModem (WWAN)
####################
Configuration
#############
The wirelessmodem interface provides access (through a wireless modem/wwan) to
wireless networks provided by various cellular providers. VyOS uses the
interfaces wirelessmodem subsystem for configuration.
Address
-------
.. cfgcmd:: set interfaces wirelessmodem <interface> apn <apn>
Every WWAN connection requires an :abbr:`APN (Access Point Name)` which is
used by the client to dial into the ISPs network. This is a mandatory
parameter. See the following list of well-known APNs:
- AT&T (isp.cingular)
- Deutsche Telekom (internet.t-d1.de or internet.telekom)
.. cfgcmd:: set interfaces wirelessmodem <interface> backup distance <metric>
Configure metric of the default route added via the Wireless Modem interface.
The default metric if not specified is 10.
.. cfgcmd:: set interfaces wirelessmodem <interface> device <tty>
Device identifier of the underlaying physical interface. This is usually a
ttyUSB device, if not configured this defaults to ttyUSB2.
.. cfgcmd:: set interfaces wirelessmodem <interface> no-peer-dns
Do not install DNS nameservers received from ISP into system wide nameserver
list.
.. cfgcmd:: set interfaces wirelessmodem <interface> ondemand
Enables or disables on-demand WWAN connection.
Use this command to instruct the system to establish a PPP connection
automatically once traffic passes through the interface. A disabled on-demand
connection is established at boot time and remains up. If the link fails for
any reason, the link is brought back up immediately.
Link Administration
-------------------
.. cfgcmd:: set interfaces wirelessmodem <interface> description <description>
Assign given `<description>` to interface. Description will also be passed
to SNMP monitoring systems.
.. cfgcmd:: set interfaces wirelessmodem <interface> disable
Disable given `<interface>`. It will be placed in administratively down
state.
.. cfgcmd:: set interfaces wirelessmodem <interface> mtu <mtu>
Configure :abbr:`MTU (Maximum Transmission Unit)` on given `<interface>`. It
is the size (in bytes) of the largest ethernet frame sent on this link.
Example
=======
The following example is based on a Sierra Wireless MC7710 miniPCIe card (only
the form factor in reality it runs UBS) and Deutsche Telekom as ISP. The card
is assembled into a :ref:`pc-engines-apu4`.
.. code-block:: none
set interfaces wirelessmodem wlm0 apn 'internet.telekom'
set interfaces wirelessmodem wlm0 backup distance '100'
set interfaces wirelessmodem wlm0 device 'ttyUSB2'
set interfaces wirelessmodem wlm0 disable
set interfaces wirelessmodem wlm0 no-peer-dns
Operation
=========
.. opcmd:: show interfaces wirelessmodem <interface>
Retrive interface information from given WWAN interface.
.. code-block:: none
vyos@vyos:~$ show interfaces wirelessmodem wlm0
wlm0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master black state UNKNOWN group default qlen 3
link/ppp
inet 10.26.238.93 peer 10.64.64.64/32 scope global wlm0
valid_lft forever preferred_lft forever
Description: baaar
RX: bytes packets errors dropped overrun mcast
38 5 0 0 0 0
TX: bytes packets errors dropped carrier collisions
217 8 0 0 0 0
.. opcmd:: show interfaces wirelessmodem <interface> statistics
Retrive interface statistics from given WWAN interface.
.. code-block:: none
vyos@vyos:~$ show interfaces wirelessmodem wlm0 statistics
IN PACK VJCOMP VJUNC VJERR | OUT PACK VJCOMP VJUNC NON-VJ
38 5 0 0 0 | 217 8 0 0 8
.. opcmd:: show interfaces wirelessmodem <interface> log
Displays log information for a WWAN interface.
|
