blob: 6caa0d3e7ead4a86638013e94d5c21e41bd7f715 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
|
.. _flow-accounting:
NetFlow is a feature that was introduced on Cisco routers around 1996 that
provides the ability to collect IP network traffic as it enters or exits an
interface. By analyzing the data provided by NetFlow, a network administrator
can determine things such as the source and destination of traffic, class of
service, and the causes of congestion. A typical flow monitoring setup (using
NetFlow) consists of three main components:
* Flow exporter: aggregates packets into flows and exports flow records towards
one or more flow collectors
* Flow collector: responsible for reception, storage and pre-processing of flow
data received from a flow exporter
* Analysis application: analyzes received flow data in the context of intrusion
detection or traffic profiling, for example
For connectionless protocols as like ICMP and UDP, a flow is considered complete
once no more packets for this flow appear after configurable timeout.
NetFlow is usually enabled on a per-interface basis to limit load on the router
components involved in NetFlow, or to limit the amount of NetFlow records
exported.
VyOS supports flow accounting through NetFlow (version 5, 9 and 10) or sFlow.
Flow Accounting
---------------
In order for flow accounting information to be collected and displayed for an
interface, the interface must be configured for flow accounting. The following
example shows how to configure ``eth0`` and ``bond3`` for flow accounting.
.. code-block:: console
set system flow-accounting interface eth0
set system flow-accounting interface bond3
NetFlow is a protocol originating from Cisco Systems. It works on level3.
VyOS supports version 5, 9 and 10 (IPFIX - IP Flow Information Export)
NetFlow v5 example:
.. code-block:: console
set system flow-accounting netflow engine-id 100
set system flow-accounting netflow version 5
set system flow-accounting netflow server 192.168.2.10 port 2055
Displaying Flow Accounting Information
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Once flow accounting is configured on an interfaces it provides the ability to
display captured network traffic information for all configured interfaces.
The following op-mode command shows flow accounting for eth0.
.. code-block:: console
vyos@vyos:~$ show flow-accounting interface eth0
flow-accounting for [eth0]
Src Addr Dst Addr Sport Dport Proto Packets Bytes Flows
0.0.0.0 192.0.2.50 811 811 udp 7733 591576 0
0.0.0.0 192.0.2.50 811 811 udp 7669 586558 1
192.0.2.200 192.0.2.51 56188 22 tcp 586 36504 1
192.0.2.99 192.0.2.51 61636 161 udp 46 6313 4
192.0.2.99 192.0.2.51 61638 161 udp 42 5364 9
192.0.2.99 192.0.2.51 61640 161 udp 42 5111 3
192.0.2.200 192.0.2.51 54702 22 tcp 86 4432 1
192.0.2.99 192.0.2.51 62509 161 udp 24 3540 1
192.0.2.99 192.0.2.51 0 0 icmp 49 2989 8
192.0.2.99 192.0.2.51 54667 161 udp 18 2658 1
192.0.2.99 192.0.2.51 54996 161 udp 18 2622 1
192.0.2.99 192.0.2.51 63708 161 udp 18 2622 1
192.0.2.99 192.0.2.51 62111 161 udp 18 2622 1
192.0.2.99 192.0.2.51 61646 161 udp 16 1977 4
192.0.2.99 192.0.2.51 56038 161 udp 10 1256 1
192.0.2.99 192.0.2.51 55570 161 udp 6 1146 1
192.0.2.99 192.0.2.51 54599 161 udp 6 1134 1
192.0.2.99 192.0.2.51 56304 161 udp 8 1029 1
|
