Running po4a for manpages.

1 files changed, 1124 insertions, 246 deletions

diff --git a/manpages/po4a/de/lh_config.en.1.po b/manpages/po4a/de/lh_config.en.1.po
index aa7d7d6d2..f523793bb 100644
--- a/manpages/po4a/de/lh_config.en.1.po
+++ b/manpages/po4a/de/lh_config.en.1.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Debconf 8\n"
-"POT-Creation-Date: 2008-08-10 03:43+0300\n"
+"POT-Creation-Date: 2009-01-29 22:56+0100\n"
 "PO-Revision-Date: 2008-08-07 22:08+0300\n"
 "Last-Translator: Automatically generated\n"
 "Language-Team: none\n"
@@ -20,7 +20,7 @@ msgstr ""
 #: lh_clean.en.1:1 lh_config.en.1:1 lh.en.1:1 lh_source.en.1:1
 #: lh_testroot.en.1:1 live-helper.en.7:1
 #, no-wrap
-msgid "2008-08-11"
+msgid "2009-01-23"
 msgstr ""
 
 # type: TH
@@ -28,7 +28,7 @@ msgstr ""
 #: lh_clean.en.1:1 lh_config.en.1:1 lh.en.1:1 lh_source.en.1:1
 #: lh_testroot.en.1:1 live-helper.en.7:1
 #, no-wrap
-msgid "1.0"
+msgid "1.0.2"
 msgstr ""
 
 # type: TH
@@ -57,88 +57,92 @@ msgstr ""
 
 # type: SH
 #: lh_binary.en.1:9 lh_bootstrap.en.1:9 lh_build.en.1:9 lh_chroot.en.1:9
-#: lh_clean.en.1:11 lh_config.en.1:177 lh.en.1:9 lh_source.en.1:9
-#: lh_testroot.en.1:9 live-helper.en.7:9
+#: lh_clean.en.1:11 lh_config.en.1:195 lh.en.1:11 lh_source.en.1:9
+#: lh_testroot.en.1:9 live-helper.en.7:13
 #, no-wrap
 msgid "DESCRIPTION"
 msgstr ""
 
 # type: SH
-#: lh_binary.en.1:13 lh_bootstrap.en.1:13 lh_build.en.1:13 lh_chroot.en.1:13
-#: lh_clean.en.1:35 lh_config.en.1:290 lh.en.1:16 lh_source.en.1:13
-#: lh_testroot.en.1:14 live-helper.en.7:161
+#: lh_binary.en.1:12 lh_bootstrap.en.1:12 lh_build.en.1:12 lh_chroot.en.1:12
+#: lh_clean.en.1:14 lh_config.en.1:200 lh.en.1:14 lh_source.en.1:12
+#: lh_testroot.en.1:14 live-helper.en.7:20
 #, no-wrap
-msgid "SEE ALSO"
+msgid "OPTIONS"
 msgstr ""
 
-# type: Plain text
+# type: SH
 #: lh_binary.en.1:15 lh_bootstrap.en.1:15 lh_build.en.1:15 lh_chroot.en.1:15
-#: lh_clean.en.1:37 lh_config.en.1:292 lh.en.1:18 lh_source.en.1:15
-#: lh_testroot.en.1:16
-msgid "I<live-helper>(7)"
+#: lh_clean.en.1:34 lh_config.en.1:403 lh.en.1:17 lh_source.en.1:15
+#: lh_testroot.en.1:17 live-helper.en.7:223
+#, no-wrap
+msgid "SEE ALSO"
 msgstr ""
 
-# type: SH
-#: lh_binary.en.1:18 lh_bootstrap.en.1:18 lh_build.en.1:18 lh_chroot.en.1:18
-#: lh_clean.en.1:40 lh_config.en.1:295 lh.en.1:21 lh_source.en.1:18
-#: lh_testroot.en.1:19 live-helper.en.7:168
-#, no-wrap
-msgid "BUGS"
+# type: Plain text
+#: lh_binary.en.1:17 lh_bootstrap.en.1:17 lh_build.en.1:17 lh_chroot.en.1:17
+#: lh_clean.en.1:36 lh_config.en.1:405 lh.en.1:19 lh_source.en.1:17
+#: lh_testroot.en.1:19
+msgid "I<live-helper>(7)"
 msgstr ""
 
 # type: Plain text
-#: lh_binary.en.1:21 lh_bootstrap.en.1:21 lh_build.en.1:21 lh_chroot.en.1:21
-#: lh_clean.en.1:43 lh_config.en.1:298 lh.en.1:24 lh_source.en.1:21
-#: lh_testroot.en.1:22 live-helper.en.7:171
-msgid ""
-"Report bugs against live-helper E<lt>I<http://packages.qa.debian.org/live-"
-"helper>E<gt>."
+#: lh_binary.en.1:19 lh_bootstrap.en.1:19 lh_build.en.1:19 lh_chroot.en.1:19
+#: lh_clean.en.1:38 lh_config.en.1:407 lh_source.en.1:19 lh_testroot.en.1:21
+msgid "This program is a part of live-helper."
 msgstr ""
 
 # type: SH
-#: lh_binary.en.1:22 lh_bootstrap.en.1:22 lh_build.en.1:22 lh_chroot.en.1:22
-#: lh_clean.en.1:44 lh_config.en.1:299 lh.en.1:25 lh_source.en.1:22
-#: lh_testroot.en.1:23 live-helper.en.7:172
+#: lh_binary.en.1:20 lh_bootstrap.en.1:20 lh_build.en.1:20 lh_chroot.en.1:20
+#: lh_clean.en.1:39 lh_config.en.1:408 lh.en.1:22 lh_source.en.1:20
+#: lh_testroot.en.1:22 live-helper.en.7:226
 #, no-wrap
 msgid "HOMEPAGE"
 msgstr ""
 
 # type: Plain text
-#: lh_binary.en.1:26 lh_bootstrap.en.1:26 lh_build.en.1:26 lh_chroot.en.1:26
-#: lh_clean.en.1:48 lh_config.en.1:303 lh.en.1:29 lh_source.en.1:26
-#: lh_testroot.en.1:27 live-helper.en.7:176
+#: lh_binary.en.1:22 lh_bootstrap.en.1:22 lh_build.en.1:22 lh_chroot.en.1:22
+#: lh_clean.en.1:41 lh_config.en.1:410 lh.en.1:24 lh_source.en.1:22
+#: lh_testroot.en.1:24 live-helper.en.7:228
 msgid ""
-"More information about the Debian Live project can be found at E<lt>I<http://"
-"debian-live.alioth.debian.org/>E<gt> and E<lt>I<http://wiki.debian.org/"
-"DebianLive/>E<gt>."
+"More information about live-helper and the Debian Live project can be found "
+"in the homepage at E<lt>I<http://debian-live.alioth.debian.org/>E<gt> and in "
+"the manual at E<lt>I<http://live.debian.net/manual/>E<gt>."
 msgstr ""
 
 # type: SH
-#: lh_binary.en.1:27 lh_bootstrap.en.1:27 lh_build.en.1:27 lh_chroot.en.1:27
-#: lh_clean.en.1:49 lh_config.en.1:304 lh.en.1:30 lh_source.en.1:27
-#: lh_testroot.en.1:28 live-helper.en.7:177
+#: lh_binary.en.1:23 lh_bootstrap.en.1:23 lh_build.en.1:23 lh_chroot.en.1:23
+#: lh_clean.en.1:42 lh_config.en.1:411 lh.en.1:25 lh_source.en.1:23
+#: lh_testroot.en.1:25 live-helper.en.7:229
 #, no-wrap
-msgid "AUTHOR"
+msgid "BUGS"
 msgstr ""
 
 # type: Plain text
-#: lh_binary.en.1:29 lh_bootstrap.en.1:29 lh_build.en.1:29 lh_chroot.en.1:29
-#: lh_clean.en.1:51 lh_config.en.1:306 lh.en.1:32 lh_source.en.1:29
-#: lh_testroot.en.1:30 live-helper.en.7:179
+#: lh_binary.en.1:25 lh_bootstrap.en.1:25 lh_build.en.1:25 lh_chroot.en.1:25
+#: lh_clean.en.1:44 lh_config.en.1:413 lh.en.1:27 lh_source.en.1:25
+#: lh_testroot.en.1:27 live-helper.en.7:231
 msgid ""
-"live-helper was written by Daniel Baumann E<lt>I<daniel@debian.org>E<gt> for "
-"the Debian project."
+"Report bugs by submitting a bugreport for the live-helper package in the "
+"Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or write "
+"a mail to the mailinglist at E<lt>I<debian-live@lists.debian.org>E<gt>."
 msgstr ""
 
 # type: SH
-#: lh_clean.en.1:17 lh_config.en.1:182
+#: lh_binary.en.1:26 lh_bootstrap.en.1:26 lh_build.en.1:26 lh_chroot.en.1:26
+#: lh_clean.en.1:45 lh_config.en.1:414 lh.en.1:28 lh_source.en.1:26
+#: lh_testroot.en.1:28 live-helper.en.7:232
 #, no-wrap
-msgid "OPTIONS"
+msgid "AUTHOR"
 msgstr ""
 
 # type: Plain text
-#: lh_clean.en.1:39 lh_config.en.1:294 lh_testroot.en.1:18
-msgid "This program is a part of live-helper."
+#: lh_binary.en.1:27 lh_bootstrap.en.1:27 lh_build.en.1:27 lh_chroot.en.1:27
+#: lh_clean.en.1:46 lh_config.en.1:415 lh.en.1:29 lh_source.en.1:27
+#: lh_testroot.en.1:29 live-helper.en.7:233
+msgid ""
+"live-helper was written by Daniel Baumann E<lt>I<daniel@debian.org>E<gt> for "
+"the Debian project."
 msgstr ""
 
 # type: TH
@@ -154,970 +158,1844 @@ msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:8
-msgid "B<lh_config [>I<live-helper\\ options>]"
+msgid "B<lh_config>"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:10
-msgid "B<lh_config>"
+msgid "  [B<--apt> apt|aptitude]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:12
-msgid "  [B<--apt> apt|aptitude]"
+msgid "  [B<--apt-ftp-proxy> I<URL>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:14
-msgid "  [B<--apt-ftp-proxy> I<URL>]"
+msgid "  [B<--apt-http-proxy> I<URL>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:16
-msgid "  [B<--apt-http-proxy> I<URL>]"
+msgid "  [B<--apt-pdiffs> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:18
-msgid "  [B<--apt-pdiffs> enabled|disabled]"
+msgid "  [B<--apt-options> I<OPTION>|\"I<OPTIONS>\"]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:20
-msgid "  [B<--apt-pipeline> I<FIXME>]"
+msgid "  [B<--aptitude-options> I<OPTION>|\"I<OPTIONS>\"]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:22
-msgid "  [B<--apt-recommends> enabled|disabled]"
+msgid "  [B<--apt-pipeline> I<FIXME>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:24
-msgid "  [B<--apt-secure> enabled|disabled]"
+msgid "  [B<--apt-recommends> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:26
-msgid "  [-a|B<--architecture> I<ARCHITECTURE>]"
+msgid "  [B<--apt-secure> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:28
-msgid "  [-b|B<--binary-images> iso|net|tar|usb-hdd]"
+msgid "  [-a|B<--architecture> I<ARCHITECTURE>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:30
-msgid "  [B<--binary-filesystem> fat16|fat32]"
+msgid "  [-b|B<--binary-images> iso|net|tar|usb-hdd]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:32
-msgid "  [B<--binary-indices> enabled|disabled]"
+msgid "  [B<--binary-filesystem> fat16|fat32]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:34
-msgid "  [B<--bootappend-install> I<PARAMETER>|I<\"PARAMETERS\">]"
+msgid "  [B<--binary-indices> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:36
-msgid "  [B<--bootappend-live> I<PARAMETER>|I<\"PARAMETERS\">]"
+msgid "  [B<--bootappend-install> I<PARAMETER>|I<\"PARAMETERS\">]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:38
-msgid "  [B<--bootloader> grub|syslinux|yaboot]"
+msgid "  [B<--bootappend-live> I<PARAMETER>|I<\"PARAMETERS\">]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:40
-msgid "  [B<--bootstrap> cdebootstrap|debootstrap]"
+msgid "  [B<--bootloader> grub|syslinux|yaboot]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:42
-msgid "  [B<--bootstrap-config> I<FILE>]"
+msgid "  [B<--bootstrap> cdebootstrap|cdebootstrap-static|debootstrap|copy]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:44
-msgid "  [-f|B<--bootstrap-flavour> minimal|standard]"
+msgid "  [B<--bootstrap-config> I<FILE>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:46
-msgid "  [B<--bootstrap-keyring> I<PACKAGE>]"
+msgid "  [-f|B<--bootstrap-flavour> minimal|standard]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:48
-msgid "  [B<--cache> enabled|disabled]"
+msgid "  [B<--bootstrap-keyring> I<PACKAGE>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:50
-msgid "  [B<--cache-indices> enabled|disabled]"
+msgid "  [B<--cache> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:52
-msgid "  [B<--cache-packages> enabled|disabled]"
+msgid "  [B<--cache-indices> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:54
-msgid "  [B<--cache-stages> I<STAGE>|I<\"STAGES\">]"
+msgid "  [B<--cache-packages> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:56
-msgid "  [B<--checksums> enabled|disabled]"
+msgid "  [B<--cache-stages> I<STAGE>|I<\"STAGES\">]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:58
-msgid "  [B<--chroot-build> enabled|disabled]"
+msgid "  [B<--checksums> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:60
-msgid "  [B<--chroot-filesystem> ext2|ext3|squashfs|plain]"
+msgid "  [B<--chroot-build> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:62
-msgid "  [-c|B<--conffile> I<FILE>]"
+msgid "  [B<--chroot-filesystem> ext2|ext3|squashfs|plain|jffs2]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:64
-msgid "  [B<--debconf-frontend> dialog|editor|noninteractive|readline]"
+msgid "  [-c|B<--conffile> I<FILE>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:66
-msgid "  [B<--debconf-nowarnings> enabled|disabled]"
+msgid "  [B<--debconf-frontend> dialog|editor|noninteractive|readline]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:68
-msgid "  [B<--debconf-priority> low|medium|high|critical]"
+msgid "  [B<--debconf-nowarnings> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:70
-msgid "  [B<--debian-installer> enabled|disabled]"
+msgid "  [B<--debconf-priority> low|medium|high|critical]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:72
-msgid "  [B<--debian-installer-daily> enabled|disabled]"
+msgid ""
+"  [B<--debian-installer> enabled|cdrom|netinst|netboot|businesscard|live|"
+"disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:74
-msgid "  [-d|B<--distribution> I<CODENAME>]"
+msgid "  [B<--debian-installer-distribution> daily|I<CODENAME>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:76
-msgid "  [-e|B<--encryption> aes128|aes192|aes256]"
+msgid "  [B<--debian-installer-preseedfile> I<FILE>|I<URL>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:78
-msgid "  [B<--fdisk> I<PROGRAM>]"
+msgid "  [-d|B<--distribution> I<CODENAME>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:80
-msgid "  [B<--grub-splash> I<FILE>]"
+msgid "  [--B<dump>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:82
-msgid "  [B<--hooks> I<FILE>]"
+msgid "  [-e|B<--encryption> disabled|aes128|aes192|aes256]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:84
-msgid "  [B<--hostname> I<NAME>]"
+msgid "  [B<--fdisk> fdisk|fdisk.dist]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:86
-msgid "  [B<--ignore-system-defaults>]"
+msgid "  [B<--genisoimage> genisomage|mkisofs]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:88
-msgid "  [B<--includes> I<PATH>]"
+msgid "  [B<--grub-splash> I<FILE>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:90
-msgid "  [B<--initramfs> auto|live-initramfs|casper]"
+msgid "  [B<--hooks> I<FILE>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:92
-msgid "  [B<--interactive> shell]"
+msgid "  [B<--hostname> I<NAME>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:94
-msgid "  [B<--iso-application> I<NAME>]"
+msgid "  [B<--ignore-system-defaults>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:96
-msgid "  [B<--iso-preparer> I<NAME>]"
+msgid "  [B<--includes> I<PATH>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:98
-msgid "  [B<--iso-publisher> I<NAME>]"
+msgid "  [B<--initramfs> auto|live-initramfs|casper]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:100
-msgid "  [B<--iso-volume> I<NAME>]"
+msgid "  [B<--interactive> shell]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:102
-msgid "  [B<--keyring-packages> I<PACKAGE|\"PACKAGES\">]"
+msgid "  [B<--iso-application> I<NAME>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:104
-msgid "  [-l|B<--language> I<LANGUAGE>]"
+msgid "  [B<--iso-preparer> I<NAME>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:106
-msgid "  [-k|B<--linux-flavours> I<FLAVOUR>|I<\"FLAVOURS\">]"
+msgid "  [B<--iso-publisher> I<NAME>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:108
-msgid "  [B<--linux-packages> I<\"PACKAGES\">]"
+msgid "  [B<--iso-volume> I<NAME>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:110
-msgid "  [B<--losetup> losetup|losetup.orig]"
+msgid "  [B<--jffs2-eraseblock> I<SIZE>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:112
-msgid "  [B<--memtest> memtest86+|memtest86]"
+msgid "  [B<--keyring-packages> I<PACKAGE|\"PACKAGES\">]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:114
-msgid "  [B<--mirror-binary-security> I<URL>]"
+msgid "  [-l|B<--language> I<LANGUAGE>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:116
-msgid "  [B<--mirror-binary> I<URL>]"
+msgid "  [-k|B<--linux-flavours> I<FLAVOUR>|I<\"FLAVOURS\">]"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:118
+msgid "  [B<--linux-packages> I<\"PACKAGES\">]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:120
-msgid "  [-m|B<--mirror-bootstrap> I<URL>]"
+msgid "  [B<--losetup> losetup|losetup.orig]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:122
-msgid "  [B<--mode> debian|debian-edu]"
+msgid "  [B<--memtest> memtest86+|memtest86|none]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:124
-msgid "  [B<--net-root-filesystem> nfs|cfs]"
+msgid "  [-m|B<--mirror-bootstrap> I<URL>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:126
-msgid "  [B<--net-root-mountoptions> I<OPTIONS>]"
+msgid "  [B<--mirror-binary> I<URL>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:128
-msgid "  [B<--net-root-path> I<PATH>]"
+msgid "  [B<--mirror-binary-security> I<URL>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:130
-msgid "  [B<--net-root-server> I<IP>|I<HOSTNAME>]"
+msgid "  [B<--mirror-chroot> I<URL>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:132
-msgid "  [B<--net-cow-filesystem> nfs|cfs]"
+msgid "  [B<--mirror-chroot-security> I<URL>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:134
-msgid "  [B<--net-cow-mountoptions> I<OPTIONS>]"
+msgid "  [B<--mode> debian|emdebian]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:136
-msgid "  [B<--net-cow-path> I<PATH>]"
+msgid "  [B<--net-root-filesystem> nfs|cfs]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:138
-msgid "  [B<--net-cow-server> I<IP>|I<HOSTNAME>]"
+msgid "  [B<--net-root-mountoptions> I<OPTIONS>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:140
-msgid "  [-p|B<--packages-lists> I<FILE>]"
+msgid "  [B<--net-root-path> I<PATH>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:142
-msgid "  [B<--packages> I<PACKAGE>|I<\"PACKAGES\">]"
+msgid "  [B<--net-root-server> I<IP>|I<HOSTNAME>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:144
-msgid "  [B<--root-command> sudo]"
+msgid "  [B<--net-cow-filesystem> nfs|cfs]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:146
-msgid "  [B<--use-fakeroot> enabled|disabled]"
+msgid "  [B<--net-cow-mountoptions> I<OPTIONS>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:148
-msgid "  [B<--categories> I<CATEGORY>|I<\"CATEGORIES\">]"
+msgid "  [B<--net-cow-path> I<PATH>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:150
-msgid "  [B<--security> enabled|disabled]"
+msgid "  [B<--net-cow-server> I<IP>|I<HOSTNAME>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:152
-msgid "  [B<--source> enabled|disabled]"
+msgid "  [B<--net-tarball> bzip2|gzip|tar|none]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:154
-msgid "  [-s|B<--source-images> iso|net|tar|usb-hdd]"
+msgid "  [-p|B<--packages-lists> I<FILE>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:156
-msgid "  [B<--symlinks> enabled|disabled]"
+msgid "  [B<--packages> I<PACKAGE>|I<\"PACKAGES\">]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:158
-msgid "  [B<--syslinux-splash> I<FILE>]"
+msgid "  [B<--root-command> sudo]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:160
-msgid "  [B<--syslinux-timeout> I<SECONDS>]"
+msgid "  [B<--use-fakeroot> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:162
-msgid "  [B<--syslinux-menu> enabled|disabled]"
+msgid "  [B<--categories> I<CATEGORY>|I<\"CATEGORIES\">]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:164
-msgid "  [B<--sysvinit> enabled|disabled]"
+msgid "  [B<--security> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:166
-msgid "  [B<--tasksel> aptitude|tasksel]"
+msgid "  [B<--source> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:168
-msgid "  [B<--tasks> I<TASK>]"
+msgid "  [-s|B<--source-images> iso|net|tar|usb-hdd]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:170
-msgid "  [B<--templates> I<PATH>]"
+msgid "  [B<--symlinks> enabled|disabled]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:172
-msgid "  [B<--union-filesystem> aufs|unionfs]"
+msgid "  [B<--syslinux-splash> I<FILE>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:174
-msgid "  [B<--exposed-root> enabled|disabled]"
+msgid "  [B<--syslinux-timeout> I<SECONDS>]"
 msgstr ""
 
 # type: Plain text
 #: lh_config.en.1:176
+msgid "  [B<--syslinux-menu> enabled|disabled]"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:178
+msgid "  [B<--sysvinit> enabled|disabled]"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:180
+msgid "  [B<--tasksel> aptitude|tasksel]"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:182
+msgid "  [B<--tasks> I<TASK>]"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:184
+msgid "  [B<--templates> I<PATH>]"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:186
+msgid "  [B<--union-filesystem> aufs|unionfs]"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:188
+msgid "  [B<--exposed-root> enabled|disabled]"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:190
 msgid "  [B<--username> I<NAME>]"
 msgstr ""
 
 # type: Plain text
-#: lh_config.en.1:181
+#: lh_config.en.1:192
+msgid "  [B<--win32-loader enabled|disabled]>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:194
+msgid "B<lh_config> [I<live-helper\\ options>]"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:197
 msgid ""
-"lh_config is a script to populate the configuration directory for live-"
-"helper.  By default, this directory is named 'config' and is created in the "
-"current directory."
+"is a high-level command (porcelain) of live-helper, the Debian Live tool "
+"suite. It populates the configuration directory for live-helper. By default, "
+"this directory is named 'config' and is created in the current directory "
+"where lh_config was executed."
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:199
+msgid ""
+"B<Attention:> lh_config tries to be smart and sets defaults for some options "
+"depending on the setting of other options (e.g. the to be used union "
+"filesystem depending on an etch system gets build or not). This means that "
+"when generating a new configuration, you should call lh_config only once "
+"with all options specified. Calling it several times with only a subset of "
+"the options each can result in non working configurations. This is also "
+"caused by the fact that lh_config called with one option only changes that "
+"option, and leaves everything else as is unless its not defined. However, "
+"lh_config does warn about know impossible or likely impossible combinations "
+"that would lead to non working live systems. If unsure, remove config/"
+"{binary,bootstrap,chroot,common,source} and call lh_config again."
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:202
+msgid ""
+"In addition to its specific options, lh_config also understands all generic "
+"live-helper options. See I<live-helper>(7) for a complete list of all "
+"generic live-helper options."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:183
+#: lh_config.en.1:203
 #, no-wrap
 msgid "B<--apt> apt|aptitude"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:205
+msgid ""
+"defines if apt-get or aptitude is used to install packages when building the "
+"image. When building etch images, this defaults to aptitude. Every other "
+"distribution defaults to apt."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:184
+#: lh_config.en.1:205
 #, no-wrap
 msgid "B<--apt-ftp-proxy> I<URL>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:207
+msgid ""
+"sets the ftp proxy to be used by apt. By default, this is empty but if the "
+"host has the environment variable ftp_proxy set, apt-ftp-proxy gets "
+"automatically set to the value of ftp_proxy."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:185
+#: lh_config.en.1:207
 #, no-wrap
 msgid "B<--apt-http-proxy> I<URL>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:209
+msgid ""
+"sets the http proxy to be used by apt. By default, this is empty but if the "
+"host has the environment variable http_proxy set, apt-http-proxy gets "
+"automatically set to the value of http_proxy."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:186
+#: lh_config.en.1:209
 #, no-wrap
 msgid "B<--apt-pdiffs> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:211
+msgid ""
+"defines whetever apt should use incremental package indices feature or not. "
+"This is enabled by default."
+msgstr ""
+
+# type: IP
+#: lh_config.en.1:211
+#, no-wrap
+msgid "B<--apt-options> I<OPTION>|\"I<OPTIONS>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:213
+msgid ""
+"defines the default options that will be appended to every apt call that is "
+"made inside chroot during the building of the image. By default, this is set "
+"to --yes to allow non-interactive installation of packages."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:187
+#: lh_config.en.1:213
+#, no-wrap
+msgid "B<--aptitude-options> I<OPTION>|\"I<OPTIONS>\""
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:215
+msgid ""
+"defines the default options that will be appended to every aptitude call "
+"that is made inside chroot during building of the image. By default, this is "
+"set to --assume-yes to allow non-interactive installation of packages."
+msgstr ""
+
+# type: IP
+#: lh_config.en.1:215
 #, no-wrap
 msgid "B<--apt-pipeline> I<FIXME>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:217 lh_config.en.1:305 lh_config.en.1:362 lh_config.en.1:390
+msgid "FIXME"
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:188
+#: lh_config.en.1:217
 #, no-wrap
 msgid "B<--apt-recommends> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:219
+msgid ""
+"defines if apt should install recommended packages automatically. By "
+"default, this is enable in the debian mode and disabled in emdebian mode."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:189
+#: lh_config.en.1:219
 #, no-wrap
 msgid "B<--apt-secure> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:221
+msgid ""
+"defines if apt should check repository signatures. This is enabled by "
+"default."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:190
+#: lh_config.en.1:221
 #, no-wrap
 msgid "-a|B<--architecture> I<ARCHITECTURE>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:223
+msgid ""
+"defines the architecture of the to be build image. By default, this is set "
+"to the host architecture. Note that you cannot crossbuild for another "
+"architecture if your host system is not able to execute binaries for the "
+"target architecture natively. For example, building amd64 images on i386 and "
+"vice versa is possile if you have a 64bit capable i386 processor and the "
+"right kernel. But building powerpc images on an i386 system is not possible."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:191
+#: lh_config.en.1:223
 #, no-wrap
 msgid "-b|B<--binary-images> iso|net|tar|usb-hdd"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:225
+msgid ""
+"defines the image type to build. By default this is set to iso to build CD/"
+"DVD images."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:192
+#: lh_config.en.1:225
 #, no-wrap
-msgid "B<--binary-filesystem> fat16|fat32"
+msgid "B<--binary-filesystem> fat16|fat32|ext2"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:227
+msgid ""
+"defines the filesystem to be used in the image type. This only has an effect "
+"if the selected binary image type does allow to choose a filesystem. For "
+"example, when selection iso the resulting CD/DVD has always the filesystem "
+"ISO9660. When building usb-hdd images for usb sticks, this is active. Note "
+"that it defaults to fat16 on all architectures except sparc where it "
+"defaults to ext2. Also note that if you choose fat16 and your resulting "
+"binary image gets bigger than 2GB, the binary filesystem automatically gets "
+"switched to fat32."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:193
+#: lh_config.en.1:227
 #, no-wrap
 msgid "B<--binary-indices> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:229
+msgid ""
+"defines if the resulting images should have binary indices or not and "
+"defaults to enabled."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:194
+#: lh_config.en.1:229
 #, no-wrap
 msgid "B<--bootappend-install> I<PARAMETER>|I<\"PARAMETERS\">"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:231
+msgid "sets boot parameters specific to debian-installer, if included."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:195
+#: lh_config.en.1:231
 #, no-wrap
 msgid "B<--bootappend-live> I<PARAMETER>|I<\"PARAMETERS\">"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:233
+msgid ""
+"sets boot parameters specific to debian-live. A complete list of boot "
+"parameters can be found, for etch, in the manpage of casper, for all other "
+"distributions in the manpage of live-initramfs. On the images, a list of all "
+"parameters (without comments) is included in the /parameters.txt."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:196
+#: lh_config.en.1:233
 #, no-wrap
 msgid "B<--bootloader> grub|syslinux|yaboot"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:235
+msgid ""
+"defines which bootloader is beeing used in the generated image. This has "
+"only an effect if the selected binary image type does allow to choose the "
+"bootloader. For example, if you build a iso, always syslinux (or more "
+"precise, isolinux) is being used. Also note that some combinations of binary "
+"images types and bootloaders may be possible but live-helper does not "
+"support them yet. lh_config will fail to create such a not yet supported "
+"configuration and give a explanation about it. For usb-hdd images on amd64 "
+"and i386, the default is syslinux. yaboot is only used on powerpc."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:197
+#: lh_config.en.1:235
 #, no-wrap
-msgid "B<--bootstrap> cdebootstrap|debootstrap"
+msgid "B<--bootstrap> cdebootstrap|cdebootstrap-static|debootstrap|copy"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:237
+msgid ""
+"defines which program is used to bootstrap the debian chroot, default is "
+"debootstrap. Note that if you set the bootstrap program to copy, then your "
+"host system is copied. This can be usefull if you want to convert/clone your "
+"existing host system into a live system, however, make sure you do have "
+"enough free space as this can, depending on your host system, get quite big."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:198
+#: lh_config.en.1:237
 #, no-wrap
 msgid "B<--bootstrap-config> I<FILE>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:239
+msgid ""
+"sets a custom configuration file for the boostrap programm of choice and is "
+"empty by default. Refere to the documentation of debootstrap or cdebootstrap "
+"for more information about that. When the bootstrap program is set to copy, "
+"this has no effect."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:199
+#: lh_config.en.1:239
 #, no-wrap
 msgid "-f|B<--bootstrap-flavour> minimal|standard"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:241
+msgid ""
+"defines if the bootstrap program should bootstrap the standard system (all "
+"packages of priority required and important, which is the default) or a "
+"minimal system (only packages of priority required, plus apt)."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:200
+#: lh_config.en.1:241
 #, no-wrap
 msgid "B<--bootstrap-keyring> I<PACKAGE>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:243
+msgid ""
+"sets the archive keyring package to be used. Default is debian-archive-"
+"keyring."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:201
+#: lh_config.en.1:243
 #, no-wrap
 msgid "B<--cache> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:245
+msgid ""
+"defines globally if any cache should be used at all. Different caches can be "
+"controled through the their own options."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:202
+#: lh_config.en.1:245
 #, no-wrap
 msgid "B<--cache-indices> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:247
+msgid ""
+"defines if downloaded package indices and lists should be cached which is "
+"disabled by default. Enabling it would allow to rebuild an image completely "
+"offline, however, you would not get updates anymore then."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:203
+#: lh_config.en.1:247
 #, no-wrap
 msgid "B<--cache-packages> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:249
+msgid ""
+"defines if downloaded packages files should be cached which is enabled by "
+"default. Disabling it does save space consumtion in your build directory, "
+"but remember that you will cause much unnecessary traffic if you do a couple "
+"of rebuilds. In general you should always leave it enabled, however, in some "
+"particular rare build setups, it can be faster to refetch packages from the "
+"local network mirror rather than to utilize the local disk."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:204
+#: lh_config.en.1:249
 #, no-wrap
-msgid "B<--cache-stages> I<STAGE>|I<\"STAGES\">"
+msgid "B<--cache-stages> enabled|disabled|I<STAGE>|I<\"STAGES\">"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:251
+msgid ""
+"sets which stages should be cached. By default set to bootstrap. As an "
+"exception to the normal stage names, also rootfs can be used here which does "
+"only cache the generated root filesystem in filesystem.{dir,ext*,squashfs}. "
+"This is usefull during development if you want to rebuild the binary stage "
+"but not regenerate the root filesystem all the time."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:205
+#: lh_config.en.1:251
 #, no-wrap
 msgid "B<--checksums> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:253
+msgid ""
+"defines if the binary image should contain a file called md5sums.txt that "
+"lists all files on the image together with their md5 checksums. This in turn "
+"can be used by live-initramfs' built-in integrity-check to verify the medium "
+"if specified at boot prompt. In general, this should not be disabled and is "
+"an important feature of live system released to the public. However, during "
+"development of very big images it can save some time by not calculating the "
+"checksums."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:206
+#: lh_config.en.1:253
 #, no-wrap
 msgid "B<--chroot-build> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:255
+msgid ""
+"defines whetever live-helper should use the tools from within the chroot to "
+"build the binary image or not by using and including the host systems tools. "
+"This is a very dangerous option, using the tools of the host system can lead "
+"to tainted and even non-bootable images if the host systems version of the "
+"required tools (mainly these are the bootloaders such as syslinux, grub and "
+"yaboot, and the auxilliary tools such as dosfstools, genisoimage, squashfs-"
+"tools and others) do not B<exactely> match what is present at build-time in "
+"the target distribution. Never do disable this option unless you are "
+"B<exactely> sure what you are doing and have B<completely>I< understood its "
+"consequences.>"
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:207
+#: lh_config.en.1:255
 #, no-wrap
-msgid "B<--chroot-filesystem> ext2|ext3|squashfs|plain"
+msgid "B<--chroot-filesystem> ext2|ext3|squashfs|plain|jffs2"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:257
+msgid ""
+"defines which filesystem type should be used for the root filesystem image. "
+"If you use plain, then no filesystem image is created and the root "
+"filesystem content is copied on the binary image filesystem as flat files. "
+"Depending on what binary filesystem you have choosen, it may not be possible "
+"to build with a plain root filesystem, e.g. fat16/fat32 and plain don't work "
+"as linux does not support to run on them."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:208
+#: lh_config.en.1:257
 #, no-wrap
 msgid "-c|B<--conffile> I<FILE>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:259
+msgid ""
+"using a user specified alternative configuration file in addition to the "
+"normally used one in the config directory."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:209
+#: lh_config.en.1:259
 #, no-wrap
 msgid "B<--debconf-frontend> dialog|editor|noninteractive|readline"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:261
+msgid ""
+"defines what value the debconf frontend should be set to inside the chroot. "
+"Note that setting it to anything by noninteractive, which is the default, "
+"makes your build asking questions during the build."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:210
+#: lh_config.en.1:261
 #, no-wrap
 msgid "B<--debconf-nowarnings> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:263
+msgid ""
+"defines if warnings of debconf should be displayed or not. Warnings from "
+"debconf are generally very rare and by default, we skipp them, if any, in "
+"order to keep the build process entirely non interactive."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:211
+#: lh_config.en.1:263
 #, no-wrap
 msgid "B<--debconf-priority> low|medium|high|critical"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:265
+msgid ""
+"defines what value the debconf priority shoul dbe set to inside the chroot. "
+"By default, it is set to critical, which means that almost none questions "
+"are displayed. Note that this only has an effect if you use any debconf "
+"frontend different from noninteractive."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:212
+#: lh_config.en.1:265
 #, no-wrap
-msgid "B<--debian-installer> enabled|disabled"
+msgid "B<--debian-installer> enabled|cdrom|netinst|netboot|businesscard|live|disabled"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:267
+msgid ""
+"defines which type, if any, of the debian-installer should be included in "
+"the resulting binary image. By default, no installer is included. All "
+"available flavours except live are the identical configurations used on the "
+"installer media produced by regular debian-cd. When live is choosen, the "
+"live-installer udeb is included so that debian-installer will behave "
+"different than usual - instead of installing the debian system from packages "
+"from the medium or the network, it installs the live system to the disk."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:213
+#: lh_config.en.1:267
 #, no-wrap
-msgid "B<--debian-installer-daily> enabled|disabled"
+msgid "B<--debian-installer-distribution> daily|I<CODENAME>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:269
+msgid ""
+"defines the distribution where the debian-installer files should be taken "
+"out from. Normally, this should be set to the same distribution as the live "
+"system. However, some times, one wants to use a newer or even daily built "
+"installer."
+msgstr ""
+
+# type: IP
+#: lh_config.en.1:269
+#, no-wrap
+msgid "B<--debian-installer-preseedfile> I<FILE>|I<URL>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:271
+msgid ""
+"sets the filename or URL for an optionally used and included preseeding file "
+"for debian-installer."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:214
+#: lh_config.en.1:271
 #, no-wrap
 msgid "-d|B<--distribution> I<CODENAME>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:273
+msgid "defines the distribution of the resulting live system."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:215
+#: lh_config.en.1:273
+#, no-wrap
+msgid "--B<dump>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:275
+msgid ""
+"prepares a report of the currently present live system configuration and the "
+"version of live-helper used. This is usefull to provide if you submit bug "
+"reports, we do get all informations required for us to locate and replicate "
+"an error."
+msgstr ""
+
+# type: IP
+#: lh_config.en.1:275
 #, no-wrap
-msgid "-e|B<--encryption> aes128|aes192|aes256"
+msgid "-e|B<--encryption> disabled|aes128|aes192|aes256"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:277
+msgid ""
+"defines if the root filesystem should be encrypted or not. By default, this "
+"is disabled."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:216
+#: lh_config.en.1:277
 #, no-wrap
-msgid "B<--fdisk> I<PROGRAM>"
+msgid "B<--fdisk> fdisk|fdisk.dist"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:279
+msgid ""
+"sets the filename of the fdisk binary from the host system that should be "
+"used. This is autodetected and does generally not need any customization."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:217
+#: lh_config.en.1:279
+#, no-wrap
+msgid "B<--genisoimage> genisomage|mkisofs"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:281
+msgid ""
+"sets the filename of the genisoimage binary from the host system that should "
+"be used. This is autodetected and does generally not need any customization."
+msgstr ""
+
+# type: IP
+#: lh_config.en.1:281
 #, no-wrap
 msgid "B<--grub-splash> I<FILE>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:283
+msgid ""
+"defines the name of an optional to be included splash screen graphic for the "
+"grub bootloader."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:218
+#: lh_config.en.1:283
 #, no-wrap
 msgid "B<--hooks> I<FILE>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:285
+msgid ""
+"defines which hooks available in /usr/share/live-helper/examples/hooks "
+"should be activated. Normally, there are no hooks executed. Make sure you "
+"know and understood the hook before you enable it."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:219
+#: lh_config.en.1:285
 #, no-wrap
 msgid "B<--hostname> I<NAME>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:287
+msgid "sets the hostname of the live system."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:220
+#: lh_config.en.1:287
+#, no-wrap
+msgid "B<--ignore-system-defaults>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:289
+msgid ""
+"lh_config by default reads system defaults from /etc/default/live-helper "
+"when generating a new live system config directory. This is usefull if you "
+"want to set global settings, such as mirror locations, and don't want to "
+"specify them all of the time."
+msgstr ""
+
+# type: IP
+#: lh_config.en.1:289
 #, no-wrap
 msgid "B<--includes> I<PATH>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:291
+msgid ""
+"sets the path to the includes that live-helper is going to use, e.g. "
+"additional minimal documentation that you want to have on all live systems. "
+"By default, this is set to /usr/share/live-helper/includes/."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:221
+#: lh_config.en.1:291
 #, no-wrap
 msgid "B<--initramfs> auto|live-initramfs|casper"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:293
+msgid ""
+"sets the name of package that contains the live system specific initramfs "
+"modification. By default, auto is used, which means that at build time of "
+"the image rather than on configuration time, the value will be expanded to "
+"casper when building etch systems and to live-initramfs for all other "
+"systems."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:222
+#: lh_config.en.1:293
 #, no-wrap
 msgid "B<--interactive> shell"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:295
+msgid ""
+"defines if after the chroot stage and before the beginning of the binary "
+"stage, a interactive shell login should be spawned in the chroot in order to "
+"allow you to do manual customizations. Once you close the shell with logout "
+"or exit, the build will continue as usual. Note that it's strongly "
+"discouraged to use this for anything else than testing. Modifications that "
+"should be present in all builds of a live system should be properly made "
+"through hooks. Everything else destroys the beauty of being able to "
+"completely automatise the build process and making it non interactive. By "
+"default, this is of course disabled."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:223
+#: lh_config.en.1:295
 #, no-wrap
 msgid "B<--iso-application> I<NAME>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:297
+msgid ""
+"sets the APPLICATION field in the header of a resulting CD/DVD image and "
+"defaults to \"Debian Live\" in debian mode, and to \"Emdebian Live\" in "
+"emdebian mode."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:224
+#: lh_config.en.1:297
 #, no-wrap
 msgid "B<--iso-preparer> I<NAME>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:299
+msgid ""
+"sets the PREPARER field in the header of a resulting CD/DVD image. By "
+"default this is set to \"live-helper I<VERSION>; http://packages.qa.debian."
+"org/live-helper\", whereas VERSION is exanded to the version of live-helper "
+"that was used to build the image."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:225
+#: lh_config.en.1:299
 #, no-wrap
 msgid "B<--iso-publisher> I<NAME>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:301
+msgid ""
+"sets the PUBLISHED field in the header of a resulting CD/DVD image. By "
+"default, this is set to 'Debian Live project; http://debian-live.alioth."
+"debian.org/; debian-live@lists.debian.org'. Remember to change this to the "
+"appropriate values at latest when you distributing custom and unofficial "
+"images."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:226
+#: lh_config.en.1:301
 #, no-wrap
 msgid "B<--iso-volume> I<NAME>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:303
+msgid ""
+"sets the VOLUME field in the header of a resulting CD/DVD and defaults to "
+"'Debian Live (I<DATE>)' in debian mode, and 'Emdebian Live (I<DATE>)' in "
+"emdebian mode, whereas DATE is expanded with the current date and time of "
+"the generation."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:227
+#: lh_config.en.1:303
 #, no-wrap
-msgid "B<--keyring-packages> I<PACKAGE|\"PACKAGES\">"
+msgid "B<--jffs2-eraseblock> I<SIZE>"
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:228
+#: lh_config.en.1:305
+#, no-wrap
+msgid "[B<--keyring-packages> I<PACKAGE|\"PACKAGES>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:307
+msgid ""
+"sets the keyring package or additional keyring packages. By default this is "
+"set to debian-archive-keyring."
+msgstr ""
+
+# type: IP
+#: lh_config.en.1:307
 #, no-wrap
 msgid "-l|B<--language> I<LANGUAGE>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:309
+msgid ""
+"sets the language of a live system by installing l10n related packages and "
+"enables generation of the correct locales through automatically setting the "
+"right boot parameters."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:229
+#: lh_config.en.1:309
 #, no-wrap
-msgid "-k|B<--linux-flavours> I<FLAVOUR>|I<\"FLAVOURS\">"
+msgid "-k|B<--linux-flavours> I<FLAVOUR>|I<\"FLAVOURS>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:311
+msgid ""
+"sets the kernel flavours to be installed. Note that in case you specify more "
+"than that the first will be configured the default kernel that gets bootet."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:230
+#: lh_config.en.1:311
 #, no-wrap
-msgid "B<--linux-packages> I<\"PACKAGES\">"
+msgid "B<--linux-packages> I<\"PACKAGES>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:313
+msgid ""
+"sets the internal name of the kernel packges naming scheme. If you use "
+"debian kernel packges, you will not have to adjust it. If you decide to use "
+"custom kernel packages that do not follow the debian naming scheme, remember "
+"to set this option to the stub of the packages only (for debian this is "
+"linux-image-2.6), so that I<STUB>-I<FLAVOUR> results in a valid package name "
+"(for debian e.g. linux-image-2.6-486). Preferably you use the meta package "
+"name, if any, for the stub, so that your configuration is ABI independent. "
+"Also don't forget that you have to include stubs of the binary modules "
+"packages for unionfs or aufs, and squashfs if you built them out-of-tree."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:231
+#: lh_config.en.1:313
 #, no-wrap
 msgid "B<--losetup> losetup|losetup.orig"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:315
+msgid ""
+"sets the filename of the losetup binary from the host system that should be "
+"used. This is autodetected and does generally not need any customization."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:232
+#: lh_config.en.1:315
 #, no-wrap
-msgid "B<--memtest> memtest86+|memtest86"
+msgid "B<--memtest> memtest86+|memtest86|none"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:317
+msgid ""
+"defines if memtest, memtest86+ or no memory tester at all should be included "
+"as secondary bootloader configuration. This is only available on amd64 and "
+"i386 and defaults to memtest86+."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:233
+#: lh_config.en.1:317
 #, no-wrap
-msgid "-m|B<--mirror-binary-security> I<URL>"
+msgid "-m|B<--mirror-bootstrap> I<URL>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:319
+msgid ""
+"sets the location of the debian package mirror that should be used to "
+"bootstrap from."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:234
+#: lh_config.en.1:319
 #, no-wrap
 msgid "B<--mirror-binary> I<URL>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:321
+msgid ""
+"sets the location of the debian package mirror that should end up configured "
+"in the final image and which is the one a user would see and use. This has "
+"not necessarily to be the same that is used to build the image, e.g. if you "
+"use a local mirror but want to have an official mirror in the image. By "
+"default, the same value that is used for --mirror-chroot is used here unless "
+"specified different."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:236
+#: lh_config.en.1:321
 #, no-wrap
-msgid "B<--mirror-bootstrap> I<URL>"
+msgid "B<--mirror-binary-security> I<URL>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:323
+msgid ""
+"sets the location of the debian security package mirror that should end up "
+"configuered in the final image. By default, the same value that is used for "
+"--mirror-chroot-security is used here unless specified different."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:237
+#: lh_config.en.1:323
 #, no-wrap
-msgid "B<--mode> debian|debian-edu"
+msgid "B<--mirror-chroot> I<URL>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:325
+msgid ""
+"sets the location of the debian package mirror that will be used to fetch "
+"the packages in order to build the live system. By default, this points to "
+"http://ftp.us.debian.org/debian/ which may not be a good default if you live "
+"outside the U.S."
+msgstr ""
+
+# type: IP
+#: lh_config.en.1:325
+#, no-wrap
+msgid "B<--mirror-chroot-security> I<URL>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:327
+msgid ""
+"sets the location of the debian security package mirror that will be used to "
+"fetch the packages in order to build the live system. By default, this "
+"points to http://security.debian.org/debian/."
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:238
+#: lh_config.en.1:327
+#, no-wrap
+msgid "B<--mode> debian|emdebian"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:329
+msgid ""
+"defines a global mode to load project specific defaults. By default this is "
+"set to debian."
+msgstr ""
+
+# type: IP
+#: lh_config.en.1:329
 #, no-wrap
 msgid "B<--net-root-filesystem> nfs|cfs"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:331
+msgid ""
+"defines the filesystem that will be configured in the bootloader "
+"configuration for your netboot image. This defaults to nfs."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:239
+#: lh_config.en.1:331
 #, no-wrap
 msgid "B<--net-root-mountoptions> I<OPTIONS>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:333
+msgid ""
+"sets additional options for mounting the root filesystem in netboot images "
+"and is by default empty."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:240
+#: lh_config.en.1:333
 #, no-wrap
 msgid "B<--net-root-path> I<PATH>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:335
+msgid ""
+"sets the file path that will be configured in the bootloader configuration "
+"for your netboot image. This defaults to /srv/debian-live in debian mode and "
+"to /srv/emebian-live when being in emdebian mode."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:241
+#: lh_config.en.1:335
 #, no-wrap
 msgid "B<--net-root-server> I<IP>|I<HOSTNAME>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:337
+msgid ""
+"sets the IP or hostname that will be configured in the bootloader "
+"configuration for the root filesystem of your netboot image. This defaults "
+"to 192.168.1.1."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:242
+#: lh_config.en.1:337
 #, no-wrap
 msgid "B<--net-cow-filesystem> nfs|cfs"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:339
+msgid ""
+"defines the filesystem type for the copy-on-write layer and defaults to nfs."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:243
+#: lh_config.en.1:339
 #, no-wrap
 msgid "B<--net-cow-mountoptions> I<OPTIONS>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:341
+msgid ""
+"sets additional options for mounting the copy-on-write layer in netboot "
+"images and is by default empty."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:245
+#: lh_config.en.1:341
 #, no-wrap
 msgid "B<--net-cow-path> I<PATH>"
 msgstr ""
 
 # type: Plain text
-#: lh_config.en.1:249
+#: lh_config.en.1:343
 msgid ""
-"Specify path to client writable filesystem. Anywhere that "
-"B<client_mac_address> is specified in the path live-initramfs will "
+"defines the path to client writable filesystem. Anywhere that "
+"I<client_mac_address> is specified in the path live-initramfs will "
 "substitute the MAC address of the client delimited with hyphens."
 msgstr ""
 
 # type: Plain text
-#: lh_config.en.1:252
+#: lh_config.en.1:346
 msgid "Example:"
 msgstr ""
 
 # type: Plain text
-#: lh_config.en.1:254
+#: lh_config.en.1:348
 msgid "/export/hosts/client_mac_address"
 msgstr ""
 
 # type: Plain text
-#: lh_config.en.1:256
+#: lh_config.en.1:350
 msgid "/export/hosts/00-16-D3-33-92-E8"
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:257
+#: lh_config.en.1:350
 #, no-wrap
 msgid "B<--net-cow-server> I<IP>|I<HOSTNAME>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:352
+msgid ""
+"sets the IP or hostname that will be configured in the bootloader "
+"configuration for the copy-on-write filesystem of your netboot image and is "
+"by default empty."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:258
+#: lh_config.en.1:352
+#, no-wrap
+msgid "B<--net-tarball> bzip2|gzip|tar|none"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:354
+msgid ""
+"defines the format of the netboot image. Choosing tar results in a not "
+"compressed tarball, bzip2 and gzip in a bzip2 resp. gzip compressed tarball. "
+"Choosing none leads to no tarball at all, the plain binary directory is "
+"considered the output in this case. Default is gzip."
+msgstr ""
+
+# type: IP
+#: lh_config.en.1:354
 #, no-wrap
 msgid "-p|B<--packages-lists> I<FILE>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:356
+msgid ""
+"defines which lists available in /usr/share/live-helper/lists should be "
+"used. By default, this is set to standard. Note that in case you have local "
+"packages lists, you also need to list them here. Putting them into config/"
+"chroot_local-packageslists is not enough."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:259
+#: lh_config.en.1:356
 #, no-wrap
 msgid "B<--packages> I<PACKAGE>|I<\"PACKAGES\">"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:358
+msgid ""
+"defines one or more packages to be installed in the live system. This is a "
+"quick and convenient place to add a few packages when building an image "
+"(limited by the max length of shell). Packages that should be permanently "
+"installed should be put into a local packages list."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:260
+#: lh_config.en.1:358
 #, no-wrap
 msgid "B<--root-command> sudo"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:360
+msgid ""
+"controls if live-helper should use sudo internally to build the live image. "
+"Note that this is not well tested and that you should, when relaying on "
+"sudo, call the individual live-helper command with sudo itself."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:261
+#: lh_config.en.1:360
 #, no-wrap
 msgid "B<--use-fakeroot> enabled|disabled"
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:262
+#: lh_config.en.1:362
 #, no-wrap
 msgid "B<--categories> I<CATEGORY>|I<\"CATEGORIES\">"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:364
+msgid ""
+"defines which package categories of a debian packages archive should be used "
+"for configured debian package mirrors. By default, this is set to main. "
+"Remember to check the licenses of each packages with respect to their "
+"redistributability in your juristiction when enabling contrib or non-free "
+"with this mechanism."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:263
+#: lh_config.en.1:364
 #, no-wrap
 msgid "B<--security> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:366
+msgid ""
+"defines if the security repositories specified in the security mirror "
+"options should be used or not."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:264
+#: lh_config.en.1:366
 #, no-wrap
 msgid "B<--source> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:368
+msgid ""
+"defines if a corresponding source image to the binary image should be build. "
+"By default this is disabled because most people do not require this and "
+"would require to download quite a few source packages. However, once you "
+"start distributing your live image, you should make sure you build it with a "
+"source image alongside."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:265
+#: lh_config.en.1:368
 #, no-wrap
 msgid "-s|B<--source-images> iso|net|tar|usb-hdd"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:370
+msgid "defines the image type for the source image. Default is tar."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:266
+#: lh_config.en.1:370
 #, no-wrap
 msgid "B<--symlinks> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:372
+msgid ""
+"defines if the symlink hack should be enabled or disabled. The symlink hack "
+"converts all absolute symlinks to relative ones. By default this is disabled "
+"and in general there is no need or gain to enable it. If you are in a "
+"special situation that requires this, you will know."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:267
+#: lh_config.en.1:372
 #, no-wrap
 msgid "B<--syslinux-splash> I<FILE>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:374
+msgid ""
+"defines the file of the syslinux splash graphic that should be used instead "
+"of the default one."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:268
+#: lh_config.en.1:374
 #, no-wrap
 msgid "B<--syslinux-timeout> I<SECONDS>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:376
+msgid ""
+"defines the timeout the syslinux bootloader should wait for input from the "
+"user at the bootprompt prior booting the default kernel. This defaults to 0 "
+"which means it will wait forever."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:269
+#: lh_config.en.1:376
 #, no-wrap
 msgid "B<--syslinux-menu> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:378
+msgid ""
+"defines if syslinux should be make use of the vgamenu capabilities or not."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:270
+#: lh_config.en.1:378
 #, no-wrap
 msgid "B<--sysvinit> enabled|disabled"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:380
+msgid ""
+"defines it the sysvinit hack should be enabled or disabled. The sysvinit "
+"hack disables all non-essential services from starting up at bootup in order "
+"to reduce overall boottime. By default this is disabled and in general there "
+"you don't want to enable it."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:271
+#: lh_config.en.1:380
 #, no-wrap
 msgid "B<--tasksel> aptitude|tasksel"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:382
+msgid ""
+"selects which program is used to install tasks. By default, this is set to "
+"tasksel."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:272
+#: lh_config.en.1:382
 #, no-wrap
 msgid "B<--tasks> I<TASK>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:384
+msgid ""
+"defines one or more package tasks to be installed in the live system. This "
+"is a quick and convenient way to get a reasonable default selection of "
+"packages suitable for most users when building an image, but it results in "
+"quite big images. If you want to have finer grained package selections, "
+"local packages lists should be used instead."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:273
+#: lh_config.en.1:384
 #, no-wrap
 msgid "B<--templates> I<PATH>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:386
+msgid ""
+"sets the path to the templates that live-helper is going to use, e.g. for "
+"bootloaders. By default, this is set to /usr/share/live-helper/templates/."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:274
+#: lh_config.en.1:386
 #, no-wrap
 msgid "B<--union-filesystem> aufs|unionfs"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:388
+msgid ""
+"defines whetever to use UnionFS or Aufs as stackable unification filesystem. "
+"When building etch images, this defaults to unionfs, everywhere else to aufs."
+msgstr ""
+
 # type: IP
-#: lh_config.en.1:275
+#: lh_config.en.1:388
 #, no-wrap
 msgid "B<--exposed-root> enabled|disabled"
 msgstr ""
 
 # type: IP
-#: lh_config.en.1:276
+#: lh_config.en.1:390
 #, no-wrap
 msgid "B<--username> I<NAME>"
 msgstr ""
 
+# type: Plain text
+#: lh_config.en.1:392
+msgid "sets the name of the account of the default user in the live system."
+msgstr ""
+
+# type: IP
+#: lh_config.en.1:392
+#, no-wrap
+msgid "B<--win32-loader enabled|disabled>"
+msgstr ""
+
+# type: Plain text
+#: lh_config.en.1:394
+msgid "defines if win32-loader should be included in the binary image or not."
+msgstr ""
+
 # type: SH
-#: lh_config.en.1:278
+#: lh_config.en.1:395
 #, no-wrap
 msgid "ENVIRONMENT"
 msgstr ""
 
 # type: Plain text
-#: lh_config.en.1:282
+#: lh_config.en.1:397
 msgid ""
 "All command line switches can also be specified through the corresponding "
-"environment variable. Environment variables are name LH_FOO, means, e.g.  --"
-"apt-ftp-proxy becomes LH_APT_FTP_PROXY."
+"environment variable. Environment variables are name LH_FOO, means, e.g. --"
+"apt-ftp-proxy becomes LH_APT_FTP_PROXY. However, this generally should not "
+"be used."
 msgstr ""
 
 # type: SH
-#: lh_config.en.1:283
+#: lh_config.en.1:398
 #, no-wrap
 msgid "FILES"
 msgstr ""
 
 # type: Plain text
-#: lh_config.en.1:285
+#: lh_config.en.1:400
 msgid "I</etc/default/live-helper>"
 msgstr ""
 
 # type: Plain text
-#: lh_config.en.1:289
+#: lh_config.en.1:402
 msgid ""
-"An optional conffile for lh_config defaults, useful to specify a few system "
-"wide defaults, like LH_MIRROR_BOOTSTRAP. This feature can be disabled by "
-"specifying the B<--ignore-system-defaults> option."
+"An optional, global configuration file for lh_config variables. It is useful "
+"to specify a few system wide defaults, like LH_MIRROR_BOOTSTRAP. This "
+"feature can be disabled by specifying the B<--ignore-system-defaults> option."
 msgstr ""