Adding live-helper 1.0~a8-1.

12 files changed, 180 insertions, 81 deletions

diff --git a/templates/syslinux/isolinux.txt b/templates/syslinux/boot.txt
index 2fe3eade7..2fe3eade7 100644
--- a/templates/syslinux/isolinux.txt
+++ b/templates/syslinux/boot.txt
diff --git a/templates/syslinux/f1.txt b/templates/syslinux/f1.txt
index b6ca5c58f..b54d5f3a5 100644
--- a/templates/syslinux/f1.txt
+++ b/templates/syslinux/f1.txt
@@ -1,25 +1,25 @@
-                     0fWelcome to Debian Live07                                   09F107
+                  0fWelcome to Debian GNU/Linux!07                                09F107
 
-This is a Debian Live system CD-ROM, built on LIVE_DATE.
+This is a Debian Live CD-ROM.
+It was built on LIVE_DATE.
 
 0fHELP INDEX07
 
 0fKEY    TOPIC07
 
 <09F107>   This page, the help index.
+<09F207>   Prerequisites for installing Debian.
 <09F307>   Boot methods for special ways of using this CD-ROM
-<09F407>   Special boot parameters, overview.
-<09F807>   How to get help.
-<09F907>   About the Debian Live project.
+<09F407>   Additional boot methods; rescue mode.
+<09F507>   Special boot parameters, overview.
+<09F607>   Special boot parameters for special machines.
+<09F707>   Special boot parameters for selected disk controllers.
+<09F807>   Special boot parameters for the install system.
+<09F907>   How to get help.
 <09F1007>  Copyrights and warranties.
 
 For F1-F9 type control and F then the digit 1-9
 For F10 type control and F then the digit 0
-
 
 
-
-
-
-
 Press F2 through F10 for details, or ENTER to 
diff --git a/templates/syslinux/f10.txt b/templates/syslinux/f10.txt
index a85b41c52..a1ce65685 100644
--- a/templates/syslinux/f10.txt
+++ b/templates/syslinux/f10.txt
@@ -1,6 +1,6 @@
 0fCOPYRIGHTS AND WARRANTIES07                                                    09F1007
 
-Debian GNU/Linux is Copyright (C) 1993-2006 Software in the Public Interest,
+Debian GNU/Linux is Copyright (C) 1993-2007 Software in the Public Interest,
 and others.
 
 The Debian GNU/Linux system is freely redistributable. After installation,
diff --git a/templates/syslinux/f2.txt b/templates/syslinux/f2.txt
new file mode 100644
index 000000000..60243d348
--- /dev/null
+++ b/templates/syslinux/f2.txt
@@ -0,0 +1,23 @@
+0fPREREQUISITES FOR INSTALLING DEBIAN07                                           09F207
+
+You must have at least 32 megabytes of RAM to use this Debian installer.
+
+You should have space on your hard disk to create a new disk partition
+of at least 256 megabytes to install the base system. You'll need more
+disk space to install additional packages, depending on what you wish
+to do with your new Debian system.
+
+See the Installation Manual or the FAQ for more information; both
+documents are available at the Debian web site, 0fhttp://www.debian.org/07
+
+Thank you for choosing Debian!
+
+
+
+
+
+
+
+
+
+Press F1control and F then 1 for the help index, or ENTER to 
\ No newline at end of file
diff --git a/templates/syslinux/f3.txt b/templates/syslinux/f3.txt
index e987a61dd..9cd2ba589 100644
--- a/templates/syslinux/f3.txt
+++ b/templates/syslinux/f3.txt
@@ -1,23 +1,23 @@
 0fBOOT METHODS07                                                                  09F307
 
+
 0fAvailable boot methods:07
 
-0flive07
-  Start the live system -- this is the default CD-ROM mode.
-0fmemtest07
-  Start the memtest86+ RAM tester.
+0finstall07
+  Start the installation -- this is the default CD-ROM install.
+0finstallgui07
+  Start the installation using the graphical installer.
+0fexpert07
+  Start the installation in expert mode, for maximum control.
+0fexpertgui07
+  Start the installation in expert mode using the graphical installer.
 
 To use one of these boot methods, type it at the prompt, optionally
 followed by any boot parameters. For example:
 
-  boot: live foo=bar
+  boot: install acpi=off
 
 If unsure, you should use the default boot method, with no special
 parameters, by simply pressing enter at the boot prompt.
 
-
-
-
-
-
-Press F1control and F then 1 for the help index, or ENTER to 
+Press F1control and F then 1 for the help index, or ENTER to 
\ No newline at end of file
diff --git a/templates/syslinux/f4.txt b/templates/syslinux/f4.txt
index a8bd4e0c7..c2cf4f488 100644
--- a/templates/syslinux/f4.txt
+++ b/templates/syslinux/f4.txt
@@ -1,23 +1,23 @@
-0fSPECIAL BOOT PARAMETERS - VARIOUS HARDWARE07                                    09F407
+0fRESCUE MODE07                                                                   09F407
 
-You can use the following boot parameters at the 0fboot:07 prompt,
-in combination with the boot method (see <09F307>).
-0f
-OPTION                                 PARAMETER TO SPECIFY07
-Check media for defects                0fintegrity-check07
-Set a static ip (no dhcp)              0fip=if,add,netm,gatew07
-Set a default locale                   0flocale=<locale>07
-Suppress some debug informations       0fquiet07
-Show internal filesystems              0fshowmounts07
-Copy the live media to memory          0ftoram07
-Set initial display mode               0fvga=<mode>07
 
-For example:
+0fUse one of these boot methods to rescue an existing install07
 
-  boot: live quiet vga=792 locale=it_IT.UTF-8
+0frescue07
+  Boot into rescue mode.
+0frescuegui07
+  Boot into rescue mode using the graphical installer.
 
 
 
 
 
-Press F1control and F then 1 for the help index, or ENTER to 
+
+
+To use one of these boot methods, type it at the prompt, optionally
+followed by any boot parameters. For example:
+
+  boot: rescue acpi=off
+
+
+Press F1control and F then 1 for the help index, or ENTER to 
\ No newline at end of file
diff --git a/templates/syslinux/f5.txt b/templates/syslinux/f5.txt
new file mode 100644
index 000000000..6e73913f4
--- /dev/null
+++ b/templates/syslinux/f5.txt
@@ -0,0 +1,23 @@
+0fSPECIAL BOOT PARAMETERS - OVERVIEW07                                            09F507
+
+On a few systems, you may need to specify a parameter at the 0fboot:07
+prompt in order to boot the system. For example, Linux may not be able
+to autodetect your hardware, and you may need to explicitly specify
+its location or type for it to be recognized.
+
+For more information about what boot parameters you can use, press:
+
+ <09F607> -- boot parameters for special machines
+ <09F707> -- boot parameters for various disk controllers
+ <09F807> -- boot parameters understood by the install system
+
+Note that to specify a parameter for a particular kernel module, use the form
+module.param=value, for example: libata.atapi_enabled=1
+
+
+
+
+
+
+
+Press F1control and F then 1 for the help index, or ENTER to 
\ No newline at end of file
diff --git a/templates/syslinux/f6.txt b/templates/syslinux/f6.txt
new file mode 100644
index 000000000..4bdb09a03
--- /dev/null
+++ b/templates/syslinux/f6.txt
@@ -0,0 +1,23 @@
+0fSPECIAL BOOT PARAMETERS - VARIOUS HARDWARE07                                    09F607
+
+You can use the following boot parameters at the 0fboot:07 prompt, 
+in combination with the boot method (see <09F307>).
+If you use hex numbers you have to use the 0x prefix (e.g., 0x300).
+0f
+HARDWARE                               PARAMETER TO SPECIFY07
+IBM PS/1 or ValuePoint (IDE disk)      0fhd=0bcylinders0f,0bheads0f,0bsectors07
+Some IBM ThinkPads                     0ffloppy.floppy=thinkpad07
+IBM Pentium Microchannel               0fmca-pentium no-hlt07
+Protect I/O port regions               0freserve=0biobase0f,0bextent07[0f,0b...07]
+Workaround faulty FPU (old machines)   0fno38707
+Laptops with screen display problems   0fvga=77107
+Use first serial port at 9600 baud     0fconsole=ttyS0,9600n807
+Force use of generic IDE driver        0fgeneric.all_generic_ide=107
+
+If you experience lockups or other hardware failures,
+disable buggy APIC interrupt routing   0fnoapic nolapic07
+
+For example:
+  boot: install vga=771 noapic nolapic
+
+Press F1control and F then 1 for the help index, or ENTER to 
\ No newline at end of file
diff --git a/templates/syslinux/f7.txt b/templates/syslinux/f7.txt
new file mode 100644
index 000000000..48f76c934
--- /dev/null
+++ b/templates/syslinux/f7.txt
@@ -0,0 +1,23 @@
+0fSPECIAL BOOT PARAMETERS - VARIOUS DISK DRIVES07                                 09F707
+
+You can use the following boot parameters at the 0fboot:07 prompt, 
+in combination with the boot method (see <09F307>).
+0f
+HARDWARE                     PARAMETER TO SPECIFY07
+Adaptec 151x, 152x           0faha152x.aha152x=0biobase07[0f,0birq07[0f,0bscsi-id07[0f,0breconnect07]]]
+Adaptec 1542                 0faha1542.aha1542=0biobase07[0f,0bbuson0f,0bbusoff07[0f,0bdmaspeed07]]
+Adaptec 274x, 284x           0faic7xxx.aic7xxx=no_reset07    (enabled if non-zero)
+BusLogic SCSI Hosts          0fBusLogic.BusLogic=0biobase07
+Certain DELL machines        0faic7xxx.aic7xxx=no_probe07
+
+This list is incomplete, see the kernel's kernel-parameters.txt file
+for more.
+
+
+
+
+For example:
+
+  boot: install aic7xxx.aic7xxx=no_probe
+
+Press F1control and F then 1 for the help index, or ENTER to 
\ No newline at end of file
diff --git a/templates/syslinux/f8.txt b/templates/syslinux/f8.txt
index 0e41de02c..04341b621 100644
--- a/templates/syslinux/f8.txt
+++ b/templates/syslinux/f8.txt
@@ -1,23 +1,23 @@
-0fGETTING HELP07                                                                  09F807
-
-If you can't run Debian Live, don't despair! The Debian Live team is
-ready to help you! We are interested in hearing about problems, because
-in general they don't happen to only 0fone07 person.
-We've either already heard about your particular problem and can dispense a
-quick fix, or we would like to hear about it and work through it with you,
-and the next user who comes up with the same problem will profit from your
-experience!
-
-See the mailinglist and wiki for more information; both
-are available at the Debian Live web site, 0fhttp://debian-live.alioth.debian.org/07
-
-
-
-
-
-
-
-
-
-
-Press F1control and F then 1 for the help index, or ENTER to 
+0fSPECIAL BOOT PARAMETERS - INSTALLATION SYSTEM07                                 09F807
+
+You can use the following boot parameters at the 0fboot:07 prompt, 
+in combination with the boot method (see <09F307>). These parameters
+control how the installer works.
+0f
+RESULT                                  PARAMETER07
+Verbose debugging                       0fDEBCONF_DEBUG=507
+Debug boot sequence                     0fBOOT_DEBUG=2|307
+Disable framebuffer                     0ffb=false07
+Don't probe for USB                     0fdebian-installer/probe/usb=false07
+Don't start PCMCIA                      0fhw-detect/start_pcmcia=false07
+Force static network config             0fnetcfg/disable_dhcp=true07
+Set keyboard map                        0fbootkbd=es07
+Use Braille tty                         0fbrltty=driver,device,texttable07
+Use high contrast accessibility theme   0ftheme=dark07
+Use special tasks                       0ftasks="kde-desktop, standard"07
+
+For example:
+
+  boot: install fb=false
+
+Press F1control and F then 1 for the help index, or ENTER to 
\ No newline at end of file
diff --git a/templates/syslinux/f9.txt b/templates/syslinux/f9.txt
index e1344a017..b0cac8dfa 100644
--- a/templates/syslinux/f9.txt
+++ b/templates/syslinux/f9.txt
@@ -1,11 +1,16 @@
-0fABOUT THE DEBIAN LIVE PROJECT07                                              09F907
+0fGETTING HELP07                                                                  09F907
 
-For information about the Debian Live project, see our web site:
-0fhttp://debian-live.alioth.debian.org/07
+If you can't install Debian, don't despair! The Debian team is ready to
+help you! We are especially interested in hearing about installation
+problems, because in general they don't happen to only 0fone07 person.
+We've either already heard about your particular problem and can dispense a
+quick fix, or we would like to hear about it and work through it with you,
+and the next user who comes up with the same problem will profit from your
+experience!
 
-For copyright information, press <09F1007>.
+See the Installation Manual or the FAQ for more information; both
+documents are available at the Debian web site, 0fhttp://www.debian.org/07
 
-Thank you for using Debian Live!
 
 
 
@@ -15,9 +20,4 @@ Thank you for using Debian Live!
 
 
 
-
-
-
-
-
-Press F1control and F then 1 for the help index, or ENTER to 
+Press F1control and F then 1 for the help index, or ENTER to 
\ No newline at end of file
diff --git a/templates/syslinux/isolinux.cfg b/templates/syslinux/isolinux.cfg
index b6c465f31..76978319a 100644
--- a/templates/syslinux/isolinux.cfg
+++ b/templates/syslinux/isolinux.cfg
@@ -1,4 +1,18 @@
-default live
+
+DISPLAY boot.txt
+
+F1 f1.txt
+F2 f2.txt
+F3 f3.txt
+F4 f4.txt
+F5 f5.txt
+F6 f6.txt
+F7 f7.txt
+F8 f8.txt
+F9 f9.txt
+F0 f10.txt
+
+DEFAULT live
 
 LIVE_KERNEL_LIVE
 
@@ -6,12 +20,5 @@ LIVE_KERNEL_INSTALL
 
 LIVE_MEMTEST
 
-display isolinux.txt
-timeout 0
-prompt 1
-f1 f1.txt
-f3 f3.txt
-f4 f4.txt
-f8 f8.txt
-f9 f9.txt
-f0 f10.txt
+PROMPT 1
+TIMEOUT 0