diff options
Diffstat (limited to 'manpages/de/lb_config.de.1')
| -rw-r--r-- | manpages/de/lb_config.de.1 | 790 |
1 files changed, 0 insertions, 790 deletions
diff --git a/manpages/de/lb_config.de.1 b/manpages/de/lb_config.de.1 deleted file mode 100644 index 9f53fbee4..000000000 --- a/manpages/de/lb_config.de.1 +++ /dev/null @@ -1,790 +0,0 @@ -.\"******************************************************************* -.\" -.\" This file was generated with po4a. Translate the source file. -.\" -.\"******************************************************************* -.TH LIVE\-BUILD 1 09.02.2013 3.0.0\-1 "Debian Live Project" - -.SH NAME -\fBlb config\fP \- Create config directory - -.SH SYNOPSIS -\fBlb config\fP [\fIlive\-build options\fP] -.PP -.\" FIXME -\fBlb config\fP -.br - [\fB\-\-apt\fP apt|aptitude] -.br - [\fB\-\-apt\-ftp\-proxy\fP \fIURL\fP] -.br - [\fB\-\-apt\-http\-proxy\fP \fIURL\fP] -.br - [\fB\-\-apt\-indices\fP true|false|none] -.br - [\fB\-\-apt\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"] -.br - [\fB\-\-aptitude\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"] -.br - [\fB\-\-apt\-pipeline\fP \fIDEPTH\fP] -.br - [\fB\-\-apt\-recommends\fP true|false] -.br - [\fB\-\-apt\-secure\fP true|false] -.br - [\fB\-\-apt\-source\-archives\fP true|false] -.br - [\-a|\fB\-\-architectures\fP \fIARCHITECTURE\fP] -.br - [\-b|\fB\-\-binary\-images\fP iso|iso\-hybrid|netboot|tar|hdd] -.br - [\fB\-\-binary\-filesystem\fP fat16|fat32|ext2|ext3|ext4] -.br - [\fB\-\-bootappend\-install\fP \fIPARAMETER\fP|\fI"PARAMETERS"\fP] -.br - [\fB\-\-bootappend\-live\fP \fIPARAMETER\fP|\fI"PARAMETERS"\fP] -.br - [\fB\-\-bootloader\fP grub|syslinux|yaboot] -.br - [\fB\-\-bootstrap\fP cdebootstrap|cdebootstrap\-static|debootstrap] -.br - [\fB\-\-cache\fP true|false] -.br - [\fB\-\-cache\-indices\fP true|false] -.br - [\fB\-\-cache\-packages\fP true|false] -.br - [\fB\-\-cache\-stages\fP \fISTAGE\fP|\fI"STAGES"\fP] -.br - [\fB\-\-checksums\fP md5|sha1|sha256|none] -.br - [\fB\-\-compression\fP bzip2|gzip|lzip|none] -.br - [\fB\-\-config\fP \fIGIT_URL::GIT_ID\fP] -.br - [\fB\-\-build\-with\-chroot\fP true|false] -.br - [\fB\-\-chroot\-filesystem\fP ext2|ext3|ext4|squashfs|jffs2|none] -.br - [\fB\-\-clean\fP] -.br - [\-c|\fB\-\-conffile\fP \fIFILE\fP] -.br - [\fB\-\-debconf\-frontend\fP dialog|editor|noninteractive|readline] -.br - [\fB\-\-debconf\-priority\fP low|medium|high|critical] -.br - [\fB\-\-debian\-installer\fP true|cdrom|netinst|netboot|businesscard|live|false] -.br - [\fB\-\-debian\-installer\-distribution\fP daily|\fICODENAME\fP] -.br - [\fB\-\-debian\-installer\-preseedfile\fP \fIFILE\fP|\fIURL\fP] -.br - [\fB\-\-debian\-installer\-gui\fP true|false] -.br - [\fB\-\-debug\fP] -.br - [\-d|\fB\-\-distribution\fP \fICODENAME\fP] -.br - [\fB\-\-parent\-distribution\fP \fICODENAME\fP] -.br - [\fB\-\-parent\-debian\-installer\-distribution\fP \fICODENAME\fP] -.br - [\fB\-\-dump\fP] -.br - [\fB\-\-fdisk\fP fdisk|fdisk.dist] -.br - [\fB\-\-firmware\-binary true|false\fP] -.br - [\fB\-\-firmware\-chroot true|false\fP] -.br - [\fB\-\-force\fP] -.br - [\fB\-\-grub\-splash\fP \fIFILE\fP] -.br - [\fB\-\-gzip\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"] -.br - [\fB\-\-hooks\fP \fIFILE\fP] -.br - [\fB\-\-ignore\-system\-defaults\fP] -.br - [\fB\-\-initramfs\fP auto|none|live\-boot|casper] -.br - [\fB\-\-initramfs\-compression\fP bzip2|gzip|lzma] -.br - [\fB\-\-initsystem\fP sysvinit|runit|systemd|upstart|none] -.br - [\fB\-\-interactive\fP shell] -.br - [\fB\-\-isohybrid\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"] -.br - [\fB\-\-iso\-application\fP \fINAME\fP] -.br - [\fB\-\-iso\-preparer\fP \fINAME\fP] -.br - [\fB\-\-iso\-publisher\fP \fINAME\fP] -.br - [\fB\-\-iso\-volume\fP \fINAME\fP] -.br - [\fB\-\-jffs2\-eraseblock\fP \fISIZE\fP] -.br - [\fB\-\-keyring\-packages\fP \fIPACKAGE|"PACKAGES"\fP] -.br - [\-k|\fB\-\-linux\-flavours\fP \fIFLAVOUR\fP|\fI"FLAVOURS"\fP] -.br - [\fB\-\-linux\-packages\fP \fI"PACKAGES"\fP] -.br - [\fB\-\-losetup\fP losetup|losetup.orig] -.br - [\fB\-\-memtest\fP memtest86+|memtest86|none] -.br - [\-m|\fB\-\-parent\-mirror\-bootstrap\fP \fIURL\fP] -.br - [\fB\-\-parent\-mirror\-chroot\fP \fIURL\fP] -.br - [\fB\-\-parent\-mirror\-chroot\-security\fP \fIURL\fP] -.br - [\fB\-\-parent\-mirror\-chroot\-updates\fP \fIURL\fP] -.br - [\fB\-\-parent\-mirror\-chroot\-backports\fP \fIURL\fP] -.br - [\fB\-\-parent\-mirror\-binary\fP \fIURL\fP] -.br - [\fB\-\-parent\-mirror\-binary\-security\fP \fIURL\fP] -.br - [\fB\-\-parent\-mirror\-binary\-updates\fP \fIURL\fP] -.br - [\fB\-\-parent\-mirror\-binary\-backports\fP \fIURL\fP] -.br - [\fB\-\-parent\-mirror\-debian\-installer\fP \fIURL\fP] -.br - [\fB\-\-mirror\-bootstrap\fP \fIURL\fP] -.br - [\fB\-\-mirror\-chroot\fP \fIURL\fP] -.br - [\fB\-\-mirror\-chroot\-security\fP \fIURL\fP] -.br - [\fB\-\-mirror\-chroot\-updates\fP \fIURL\fP] -.br - [\fB\-\-mirror\-chroot\-backports\fP \fIURL\fP] -.br - [\fB\-\-mirror\-binary\fP \fIURL\fP] -.br - [\fB\-\-mirror\-binary\-security\fP \fIURL\fP] -.br - [\fB\-\-mirror\-binary\-updates\fP \fIURL\fP] -.br - [\fB\-\-mirror\-binary\-backports\fP \fIURL\fP] -.br - [\fB\-\-mirror\-debian\-installer\fP \fIURL\fP] -.br - [\fB\-\-mode\fP debian|emdebian|progress\-linux|ubuntu] -.br - [\fB\-\-system\fP live|normal] -.br - [\fB\-\-net\-root\-filesystem\fP nfs|cfs] -.br - [\fB\-\-net\-root\-mountoptions\fP \fIOPTIONS\fP] -.br - [\fB\-\-net\-root\-path\fP \fIPATH\fP] -.br - [\fB\-\-net\-root\-server\fP \fIIP\fP|\fIHOSTNAME\fP] -.br - [\fB\-\-net\-cow\-filesystem\fP nfs|cfs] -.br - [\fB\-\-net\-cow\-mountoptions\fP \fIOPTIONS\fP] -.br - [\fB\-\-net\-cow\-path\fP \fIPATH\fP] -.br - [\fB\-\-net\-cow\-server\fP \fIIP\fP|\fIHOSTNAME\fP] -.br - [\fB\-\-net\-tarball\fP true|false] -.br - [\fB\-\-quiet\fP] -.br - [\fB\-\-root\-command\fP sudo] -.br - [\fB\-\-use\-fakeroot\fP true|false] -.br - [\fB\-\-archives\fP \fIARCHIVE\fP|\fI"ARCHIVES"\fP] -.br - [\fB\-\-archive\-areas\fP \fIARCHIVE_AREA\fP|\fI"ARCHIVE_AREAS"\fP] -.br - [\fB\-\-parent\-archive\-areas\fP -\fIPARENT_ARCHIVE_AREA\fP|\fI"PARENT_ARCHIVE_AREAS"\fP] -.br - [\fB\-\-security\fP true|false] -.br - [\fB\-\-source\fP true|false] -.br - [\-s|\fB\-\-source\-images\fP iso|netboot|tar|hdd] -.br - [\fB\-\-tasksel\fP apt|aptitude|tasksel] -.br - [\fB\-\-templates\fP \fIPATH\fP] -.br - [\fB\-\-hdd\-size \fP\fIMB\fP] -.br - [\fB\-\-updates\fP true|false] -.br - [\fB\-\-backports\fP true|false] -.br - [\fB\-\-exposed\-root\fP true|false] -.br - [\fB\-\-verbose\fP] -.br -.\" FIXME - [\fB\-\-win32\-loader true|false]\fP - -.SH DESCRIPTION -\fBlb config\fP is a high\-level command (porcelain) of \fIlive\-build\fP(7), the -Debian Live tool suite. -.PP -.\" FIXME -\fBlb config\fP populates the configuration directory for live\-build. By -default, this directory is named 'config' and is created in the current -directory where \fBlb config\fP was executed. -.PP -.\" FIXME -Note: Currently \fBlb config\fP tries to be smart and sets defaults for some -options depending on the setting of other options (e.g. which linux packages -to be used depending on if a squeeze system gets build or not). This means -that when generating a new configuration, you should call \fBlb config\fP only -once with all options specified. Calling it several times with only a subset -of the options each can result in non working configurations. This is also -caused by the fact that \fBlb config\fP called with one option only changes -that option, and leaves everything else as is unless its not -defined. However, \fBlb config\fP does warn about know impossible or likely -impossible combinations that would lead to non working live systems. If -unsure, remove config/{binary,bootstrap,chroot,common,source} and call \fBlb -config\fP again. - -.SH OPTIONS -In addition to its specific options \fBlb config\fP understands all generic -live\-build options. See \fIlive\-build\fP(7) for a complete list of all generic -live\-build options. -.PP -.\" FIXME -.IP "\fB\-\-apt\fP apt|aptitude" 4 -defines if apt\-get or aptitude is used to install packages when building the -image. The default is apt. -.IP "\fB\-\-apt\-ftp\-proxy\fP \fIURL\fP" 4 -sets the ftp proxy to be used by apt. By default, this is empty. Note that -this variable is only for the proxy that gets used by apt internally within -the chroot, it is not used for anything else. -.IP "\fB\-\-apt\-http\-proxy\fP \fIURL\fP" 4 -sets the http proxy to be used by apt. By default, this is empty. Note that -this variable is only for the proxy that gets used by apt internally within -the chroot, it is not used for anything else. -.IP "\fB\-\-apt\-indices\fP true|false|none" 4 -defines if the resulting images should have apt indices or not and defaults -to true. If set to none, no indices are included at all. -.IP "\fB\-\-apt\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4 -defines the default options that will be appended to every apt call that is -made inside chroot during the building of the image. By default, this is set -to \-\-yes to allow non\-interactive installation of packages. -.IP "\fB\-\-aptitude\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4 -defines the default options that will be appended to every aptitude call -that is made inside chroot during building of the image. By default, this is -set to \-\-assume\-yes to allow non\-interactive installation of packages. -.IP "\fB\-\-apt\-pipeline\fP \fIDEPTH\fP" 4 -sets the depth of the apt/aptitude pipeline. In cases where the remote -server is not RFC conforming or buggy (such as Squid 2.0.2) this option can -be a value from 0 to 5 indicating how many outstanding requests APT should -send. A value of zero MUST be specified if the remote host does not properly -linger on TCP connections \- otherwise data corruption will occur. Hosts -which require this are in violation of RFC 2068. By default, live\-build does -not set this option. -.IP "\fB\-\-apt\-recommends\fP true|false" 4 -defines if apt should install recommended packages automatically. By -default, this is true except in emdebian mode. -.IP "\fB\-\-apt\-secure\fP true|false" 4 -defines if apt should check repository signatures. This is true by default. -.IP "\fB\-\-apt\-source\-archives\fP true|false" 4 -defines if deb\-src entries should be included in the resulting live image or -not, defaults to on. -.IP "\-a|\fB\-\-architectures\fP \fIARCHITECTURE\fP" 4 -defines the architecture of the to be build image. By default, this is set -to the host architecture. Note that you cannot crossbuild for another -architecture if your host system is not able to execute binaries for the -target architecture natively. For example, building amd64 images on i386 and -vice versa is possile if you have a 64bit capable i386 processor and the -right kernel. But building powerpc images on an i386 system is not possible. -.IP "\-b|\fB\-\-binary\-images\fP iso|iso\-hybrid|netboot|tar|hdd" 4 -defines the image type to build. By default, for images using syslinux this -is set to iso\-hybrid to build CD/DVD images that may also be used like hdd -images, for non\-syslinux images, it defaults to iso. -.IP "\fB\-\-binary\-filesystem\fP fat16|fat32|ext2|ext3|ext4" 4 -defines the filesystem to be used in the image type. This only has an effect -if the selected binary image type does allow to choose a filesystem. For -example, when selection iso the resulting CD/DVD has always the filesystem -ISO9660. When building hdd images for usb sticks, this is active. Note that -it defaults to fat16 on all architectures except sparc where it defaults to -ext4. Also note that if you choose fat16 and your resulting binary image -gets bigger than 2GB, the binary filesystem automatically gets switched to -fat32. -.IP "\fB\-\-bootappend\-install\fP \fIPARAMETER\fP|\(dq\fIPARAMETERS\fP\(dq" 4 -sets boot parameters specific to debian\-installer, if included. -.IP "\fB\-\-bootappend\-live\fP \fIPARAMETER\fP|\(dq\fIPARAMETERS\fP\(dq" 4 -sets boot parameters specific to debian\-live. A complete list of boot -parameters can be found in the \fIlive\-boot\fP(7) and \fIlive\-config\fP(7) manual -pages. -.IP "\fB\-\-bootloader\fP grub|syslinux|yaboot" 4 -defines which bootloader is beeing used in the generated image. This has -only an effect if the selected binary image type does allow to choose the -bootloader. For example, if you build a iso, always syslinux (or more -precise, isolinux) is being used. Also note that some combinations of binary -images types and bootloaders may be possible but live\-build does not support -them yet. \fBlb config\fP will fail to create such a not yet supported -configuration and give a explanation about it. For hdd images on amd64 and -i386, the default is syslinux. yaboot is only used on powerpc. -.IP "\fB\-\-bootstrap\fP cdebootstrap|cdebootstrap\-static|debootstrap" 4 -defines which program is used to bootstrap the debian chroot, default is -debootstrap. -.IP "\fB\-\-cache\fP true|false" 4 -defines globally if any cache should be used at all. Different caches can be -controled through the their own options. -.IP "\fB\-\-cache\-indices\fP true|false" 4 -defines if downloaded package indices and lists should be cached which is -false by default. Enabling it would allow to rebuild an image completely -offline, however, you would not get updates anymore then. -.IP "\fB\-\-cache\-packages\fP true|false" 4 -defines if downloaded packages files should be cached which is true by -default. Disabling it does save space consumtion in your build directory, -but remember that you will cause much unnecessary traffic if you do a couple -of rebuilds. In general you should always leave it true, however, in some -particular rare build setups, it can be faster to refetch packages from the -local network mirror rather than to utilize the local disk. -.IP "\fB\-\-cache\-stages\fP true|false|\fISTAGE\fP|\(dq\fISTAGES\fP\(dq" 4 -sets which stages should be cached. By default set to bootstrap. As an -exception to the normal stage names, also rootfs can be used here which does -only cache the generated root filesystem in -filesystem.{dir,ext*,squashfs}. This is useful during development if you -want to rebuild the binary stage but not regenerate the root filesystem all -the time. -.IP "\fB\-\-checksums\fP md5|sha1|sha256|none" 4 -defines if the binary image should contain a file called md5sums.txt, -sha1sums.txt and/or sha256sums.txt. These lists all files on the image -together with their checksums. This in turn can be used by live\-boots -built\-in integrity\-check to verify the medium if specified at boot -prompt. In general, this should not be false and is an important feature of -live system released to the public. However, during development of very big -images it can save some time by not calculating the checksums. -.IP "\fB\-\-compression\fP bzip2|gzip|lzip|none" 4 -defines the compression program to be used to compress tarballs. Defaults to -gzip. -.IP "\fB\-\-config\fP \fIGIT_URL\fP::\fIGIT_ID\fP" 4 -allows to bootstrap a config tree from a git repositories, optionally -appended by a Git Id (branch, commit, tag, etc.). -.IP "\fB\-\-build\-with\-chroot\fP true|false" 4 -defines whetever live\-build should use the tools from within the chroot to -build the binary image or not by using and including the host systems -tools. This is a very dangerous option, using the tools of the host system -can lead to tainted and even non\-bootable images if the host systems version -of the required tools (mainly these are the bootloaders such as syslinux, -grub and yaboot, and the auxilliary tools such as dosfstools, xorriso, -squashfs\-tools and others) do not \fBexactely\fP match what is present at -build\-time in the target distribution. Never do disable this option unless -you are \fBexactely\fP sure what you are doing and have \fBcompletely\fP\fI -understood its consequences.\fP -.IP "\fB\-\-chroot\-filesystem\fP ext2|ext3|ext4|squashfs|jffs2|none" 4 -defines which filesystem type should be used for the root filesystem -image. If you use none, then no filesystem image is created and the root -filesystem content is copied on the binary image filesystem as flat -files. Depending on what binary filesystem you have choosen, it may not be -possible to build with such a plain root filesystem, e.g. fat16/fat32 will -not work as linux does not support to run directly on them. -.IP \fB\-\-clean\fP 4 -minimizes config directory by automatically removing unused and thus empty -subdirectories. -.IP "\-c|\fB\-\-conffile\fP \fIFILE\fP" 4 -using a user specified alternative configuration file in addition to the -normally used one in the config directory. -.IP "\fB\-\-debconf\-frontend\fP dialog|editor|noninteractive|readline" 4 -defines what value the debconf frontend should be set to inside the -chroot. Note that setting it to anything by noninteractive, which is the -default, makes your build asking questions during the build. -.IP "\fB\-\-debconf\-priority\fP low|medium|high|critical" 4 -defines what value the debconf priority shoul dbe set to inside the -chroot. By default, it is set to critical, which means that almost no -questions are displayed. Note that this only has an effect if you use any -debconf frontend different from noninteractive. -.IP "\fB\-\-debian\-installer\fP true|cdrom|netinst|netboot|businesscard|live|false" 4 -defines which type, if any, of the debian\-installer should be included in -the resulting binary image. By default, no installer is included. All -available flavours except live are the identical configurations used on the -installer media produced by regular debian\-cd. When live is choosen, the -live\-installer udeb is included so that debian\-installer will behave -different than usual \- instead of installing the debian system from packages -from the medium or the network, it installs the live system to the disk. -.IP "\fB\-\-debian\-installer\-distribution\fP daily|\fICODENAME\fP" 4 -defines the distribution where the debian\-installer files should be taken -out from. Normally, this should be set to the same distribution as the live -system. However, some times, one wants to use a newer or even daily built -installer. -.IP "\fB\-\-debian\-installer\-preseedfile\fP \fIFILE\fP|\fIURL\fP" 4 -sets the filename or URL for an optionally used and included preseeding file -for debian\-installer. If config/binary_debian\-installer/preseed.cfg exists, -it will be used by default. -.IP "\fB\-\-debian\-installer\-gui\fP true|false" 4 -defines if the debian\-installer graphical GTK interface should be true or -not. In Debian mode and for most versions of Ubuntu, this option is true, -whereas otherwise false, by default. -.IP \fB\-\-debug\fP 4 -turn on debugging informational messages. -.IP "\-d|\fB\-\-distribution\fP \fICODENAME\fP" 4 -defines the distribution of the resulting live system. -.IP "\-d|\fB\-\-parent\-distribution\fP \fICODENAME\fP" 4 -defines the parent distribution for derivatives of the resulting live -system. -.IP "\-d|\fB\-\-parent\-debian\-installer\-distribution\fP \fICODENAME\fP" 4 -defines the parent debian\-installer distribution for derivatives of the -resulting live system. -.IP \fB\-\-dump\fP 4 -prepares a report of the currently present live system configuration and the -version of live\-build used. This is useful to provide if you submit bug -reports, we do get all informations required for us to locate and replicate -an error. -.IP "\fB\-\-fdisk\fP fdisk|fdisk.dist" 4 -sets the filename of the fdisk binary from the host system that should be -used. This is autodetected and does generally not need any customization. -.IP \fB\-\-force\fP 4 -forces re\-execution of already run stages. Use only if you know what you are -doing. It is generally safer to use \fBlb clean\fP to clean up before -re\-executing \fBlb build\fP. -.IP "\fB\-\-grub\-splash\fP \fIFILE\fP" 4 -defines the name of an optional to be included splash screen graphic for the -grub bootloader. -.IP "\fB\-\-gzip\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4 -defines the default options that will be appended to (almost) every gzip -call during the building of the image. By default, this is set to \-\-best to -use highest (but slowest) compression. Dynamically, if the host system -supports it, also \-\-rsyncable is added. -.IP "\fB\-\-hooks\fP \fIFILE\fP" 4 -defines which hooks available in /usr/share/live/build/examples/hooks should -be activated. Normally, there are no hooks executed. Make sure you know and -understood the hook before you enable it. -.IP \fB\-\-ignore\-system\-defaults\fP 4 -\fBlb config\fP by default reads system defaults from \fI/etc/live/build.conf\fP -and \fI/etc/live/build/*\fP when generating a new live system config -directory. This is useful if you want to set global settings, such as mirror -locations, and don't want to specify them all of the time. -.IP "\fB\-\-initramfs\fP auto|none|live\-boot|casper" 4 -sets the name of package that contains the live system specific initramfs -modification. By default, auto is used, which means that at build time of -the image rather than on configuration time, the value will be expanded to -casper when building ubuntu systems, to live\-boot for all other -systems. Using 'none' is useful if the resulting system image should not be -a live image (experimental). -.IP "\fB\-\-initramfs\-compression\fP bzip2|gzip|lzma]" -defines the compression program to be used to compress the -initramfs. Defaults to gzip. -.IP "\fB\-\-interactive\fP shell" 4 -defines if after the chroot stage and before the beginning of the binary -stage, a interactive shell login should be spawned in the chroot in order to -allow you to do manual customizations. Once you close the shell with logout -or exit, the build will continue as usual. Note that it's strongly -discouraged to use this for anything else than testing. Modifications that -should be present in all builds of a live system should be properly made -through hooks. Everything else destroys the beauty of being able to -completely automatise the build process and making it non interactive. By -default, this is of course false. -.IP "\fB\-\-isohybrid\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4 -defines options to pass to isohybrid. -.IP "\fB\-\-iso\-application\fP \fINAME\fP" 4 -sets the APPLICATION field in the header of a resulting CD/DVD image and -defaults to "Debian Live" in debian mode, and to "Emdebian Live" in emdebian -mode, and "Ubuntu Live" in ubuntu mode. -.IP "\fB\-\-iso\-preparer\fP \fINAME\fP" 4 -sets the PREPARER field in the header of a resulting CD/DVD image. By -default this is set to "live\-build \fIVERSION\fP; -http://packages.qa.debian.org/live\-build", whereas VERSION is expanded to -the version of live\-build that was used to build the image. -.IP "\fB\-\-iso\-publisher\fP \fINAME\fP" 4 -sets the PUBLISHED field in the header of a resulting CD/DVD image. By -default, this is set to 'Debian Live project; http:/live.debian.net/; -debian\-live@lists.debian.org'. Remember to change this to the appropriate -values at latest when you distributing custom and unofficial images. -.IP "\fB\-\-iso\-volume\fP \fINAME\fP" 4 -sets the VOLUME field in the header of a resulting CD/DVD and defaults to -\&'(\fIMODE\fP) (\fIDISTRIBUTION\fP) (\fIDATE\fP)' whereas MODE is expanded to the name -of the mode in use, DISTRIBUTION the distribution name, and DATE with the -current date and time of the generation. -.IP "\fB\-\-jffs2\-eraseblock\fP \fISIZE\fP" 4 -sets the eraseblock size for a JFFS2 (Second Journalling Flash File System) -filesystem. The default is 64 KiB. If you use an erase block size different -than the erase block size of the target MTD device, JFFS2 may not perform -optimally. If the SIZE specified is below 4096, the units are assumed to be -KiB. -.IP "\fB\-\-keyring\-packages\fP \fIPACKAGE|\(dqPACKAGES\fP\(dq" 4 -sets the keyring package or additional keyring packages. By default this is -set to debian\-archive\-keyring. -.IP "\-k|\fB\-\-linux\-flavours\fP \fIFLAVOUR\fP|\(dq\fIFLAVOURS\fP\(dq" 4 -sets the kernel flavours to be installed. Note that in case you specify more -than that the first will be configured the default kernel that gets booted. -.IP "\fB\-\-linux\-packages\fP \(dq\fIPACKAGES\fP\(dq" 4 -sets the internal name of the kernel packages naming scheme. If you use -debian kernel packages, you will not have to adjust it. If you decide to use -custom kernel packages that do not follow the debian naming scheme, remember -to set this option to the stub of the packages only (for debian this is -linux\-image\-2.6), so that \fISTUB\fP\-\fIFLAVOUR\fP results in a valid package name -(for debian e.g. linux\-image\-2.6\-486). Preferably you use the meta package -name, if any, for the stub, so that your configuration is ABI -independent. Also don't forget that you have to include stubs of the binary -modules packages for unionfs or aufs, and squashfs if you built them -out\-of\-tree. -.IP "\fB\-\-losetup\fP losetup|losetup.orig" 4 -sets the filename of the losetup binary from the host system that should be -used. This is autodetected and does generally not need any customization. -.IP "\fB\-\-memtest\fP memtest86+|memtest86|none" 4 -defines if memtest, memtest86+ or no memory tester at all should be included -as secondary bootloader configuration. This is only available on amd64 and -i386 and defaults to memtest86+. -.IP "\-m|\fB\-\-parent\-mirror\-bootstrap\fP \fIURL\fP" 4 -sets the location of the debian package mirror that should be used to -bootstrap from. This defaults to http://ftp.de.debian.org/debian/ which may -not be a good default if you live outside of Europe. -.IP "\fB\-\-parent\-mirror\-chroot\fP \fIURL\fP" 4 -sets the location of the debian package mirror that will be used to fetch -the packages in order to build the live system. By default, this is set to -the value of \-\-parent\-mirror\-bootstrap. -.IP "\fB\-\-parent\-mirror\-chroot\-security\fP \fIURL\fP" 4 -sets the location of the debian security package mirror that will be used to -fetch the packages in order to build the live system. By default, this -points to http://security.debian.org/debian/. -.IP "\fB\-\-parent\-mirror\-chroot\-updates\fP \fIURL\fP" 4 -sets the location of the debian updates package mirror that will be used to -fetch packages in order to build the live system. By default, this is set to -the value of \-\-parent\-mirror\-chroot. -.IP "\fB\-\-parent\-mirror\-chroot\-backports\fP \fIURL\fP" 4 -sets the location of the debian backports package mirror that will be used -to fetch packages in order to build the live system. By default, this points -to http://backports.debian.org/debian\-backports/. -.IP "\fB\-\-parent\-mirror\-binary\fP \fIURL\fP" 4 -sets the location of the debian package mirror that should end up configured -in the final image and which is the one a user would see and use. This has -not necessarily to be the same that is used to build the image, e.g. if you -use a local mirror but want to have an official mirror in the image. By -default, 'http://http.debian.net/debian/' is used. -.IP "\fB\-\-parent\-mirror\-binary\-security\fP \fIURL\fP" 4 -sets the location of the debian security package mirror that should end up -configured in the final image. By default, 'http://security.debian.org/' is -used. -.IP "\fB\-\-parent\-mirror\-binary\-updates\fP \fIURL\fP" 4 -sets the location of the debian updates package mirror that should end up -configured in the final image. By default, the value of -\-\-parent\-mirror\-binary is used. -.IP "\fB\-\-parent\-mirror\-binary\-backports\fP \fIURL\fP" 4 -sets the location of the debian backports package mirror that should end up -configured in the final image. By default, -\&'http://backports.debian.org/debian\-backports/' is used. -.IP "\fB\-\-parent\-mirror\-debian\-installer\fP \fIURL\fP" 4 -sets the location of the mirror that will be used to fetch the debian -installer images. By default, this points to the same mirror used to build -the live system, i.e. the value of \-\-parent\-mirror\-bootstrap. -.IP "\fB\-\-mirror\-bootstrap\fP \fIURL\fP" 4 -sets the location of the debian package mirror that should be used to -bootstrap the derivative from. This defaults to -http://ftp.de.debian.org/debian/ which may not be a good default if you live -outside of Europe. -.IP "\fB\-\-mirror\-chroot\fP \fIURL\fP" 4 -sets the location of the debian package mirror that will be used to fetch -the packages of the derivative in order to build the live system. By -default, this is set to the value of \-\-mirror\-bootstrap. -.IP "\fB\-\-mirror\-chroot\-security\fP \fIURL\fP" 4 -sets the location of the debian security package mirror that will be used to -fetch the packages of the derivative in order to build the live system. By -default, this points to http://security.debian.org/debian/. -.IP "\fB\-\-mirror\-chroot\-updates\fP \fIURL\fP" 4 -sets the location of the debian updates package mirror that will be used to -fetch packages of the derivative in order to build the live system. By -default, this is set to the value of \-\-mirror\-chroot. -.IP "\fB\-\-mirror\-chroot\-backports\fP \fIURL\fP" 4 -sets the location of the debian backports package mirror that will be used -to fetch packages of the derivative in order to build the live system. By -default, this points to http://backports.debian.org/debian\-backports/. -.IP "\fB\-\-mirror\-binary\fP \fIURL\fP" 4 -sets the location of the derivative package mirror that should end up -configured in the final image and which is the one a user would see and -use. This has not necessarily to be the same that is used to build the -image, e.g. if you use a local mirror but want to have an official mirror in -the image. -.IP "\fB\-\-mirror\-binary\-security\fP \fIURL\fP" 4 -sets the location of the derivatives security package mirror that should end -up configured in the final image. -.IP "\fB\-\-mirror\-binary\-updates\fP \fIURL\fP" 4 -sets the location of the derivatives updates package mirror that should end -up configured in the final image. -.IP "\fB\-\-mirror\-binary\-backports\fP \fIURL\fP" 4 -sets the location of the derivatives backports package mirror that should -end up configured in the final image. -.IP "\fB\-\-mirror\-debian\-installer\fP \fIURL\fP" 4 -sets the location of the mirror that will be used to fetch the debian -installer images of the derivative. By default, this points to the same -mirror used to build the live system, i.e. the value of \-\-mirror\-bootstrap. -.IP "\fB\-\-mode\fP debian|emdebian|progress|ubuntu" 4 -defines a global mode to load project specific defaults. By default this is -set to debian. -.IP "\fB\-\-system\fP live|normal" 4 -defines if the resulting system image should a live system or a normal, -non\-live system. -.IP "\fB\-\-net\-root\-filesystem\fP nfs|cfs" 4 -defines the filesystem that will be configured in the bootloader -configuration for your netboot image. This defaults to nfs. -.IP "\fB\-\-net\-root\-mountoptions\fP \fIOPTIONS\fP" 4 -sets additional options for mounting the root filesystem in netboot images -and is by default empty. -.IP "\fB\-\-net\-root\-path\fP \fIPATH\fP" 4 -sets the file path that will be configured in the bootloader configuration -for your netboot image. This defaults to /srv/debian\-live in debian mode and -to /srv/emebian\-live when being in emdebian mode, and /srv/ubuntu\-live when -in ubuntu mode. -.IP "\fB\-\-net\-root\-server\fP \fIIP\fP|\fIHOSTNAME\fP" 4 -sets the IP or hostname that will be configured in the bootloader -configuration for the root filesystem of your netboot image. This defaults -to 192.168.1.1. -.IP "\fB\-\-net\-cow\-filesystem\fP nfs|cfs" 4 -defines the filesystem type for the copy\-on\-write layer and defaults to nfs. -.IP "\fB\-\-net\-cow\-mountoptions\fP \fIOPTIONS\fP" 4 -sets additional options for mounting the copy\-on\-write layer in netboot -images and is by default empty. -.IP "\fB\-\-net\-cow\-path\fP \fIPATH\fP" 4 -defines the path to client writable filesystem. Anywhere that -\fIclient_mac_address\fP is specified in the path live\-boot will substitute the -MAC address of the client delimited with hyphens. -.PP -.IP "" 4 -Example: -.br -/export/hosts/client_mac_address -.br -/export/hosts/00\-16\-D3\-33\-92\-E8 -.IP "\fB\-\-net\-cow\-server\fP \fIIP\fP|\fIHOSTNAME\fP" 4 -sets the IP or hostname that will be configured in the bootloader -configuration for the copy\-on\-write filesystem of your netboot image and is -by default empty. -.IP "\fB\-\-net\-tarball\fP true|false" 4 -defines if a compressed tarball should be created. Disabling this options -leads to no tarball at all, the plain binary directory is considered the -output in this case. Default is true. -.IP "\fB\-\-archives\fP \fIARCHIVE\fP|\(dq\fIARCHIVES\fP\(dq" 4 -enables one of available third\-party archive configurations in -/usr/share/live/build/archives. -.IP "\fB\-\-root\-command\fP sudo" 4 -controls if live\-build should use sudo internally to build the live -image. Note that this is not well tested and that you should, when relying -on sudo, call the individual live\-build command with sudo itself. -.IP "\fB\-\-use\-fakeroot\fP true|false" 4 -controls if live\-build should utilize fakeroot and fakechroot to try and -avoid requiring root privillages where possible. By default, this option is -false. -.IP "\fB\-\-archive\-areas\fP \fIARCHIVE_AREA\fP|\(dq\fIARCHIVE_AREAS\fP\(dq" 4 -defines which package archive areas of a debian packages archive should be -used for configured debian package mirrors. By default, this is set to -main. Remember to check the licenses of each packages with respect to their -redistributability in your juristiction when enabling contrib or non\-free -with this mechanism. -.IP "\fB\-\-parent\-archive\-areas\fP \fIPARENT_ARCHIVE_AREA\fP|\(dq\fIPARENT_ARCHIVE_AREAS\fP\(dq" 4 -defines the archive areas for derivatives of the resulting live system. -.IP "\fB\-\-security\fP true|false" 4 -defines if the security repositories specified in the security mirror -options should be used or not. -.IP "\fB\-\-source\fP true|false" 4 -defines if a corresponding source image to the binary image should be -build. By default this is false because most people do not require this and -would require to download quite a few source packages. However, once you -start distributing your live image, you should make sure you build it with a -source image alongside. -.IP "\-s|\fB\-\-source\-images\fP iso|netboot|tar|hdd" 4 -defines the image type for the source image. Default is tar. -.IP "\fB\-\-firmware\-binary\fP true|false" 4 -defines if firmware packages should be automatically included into the -binary pool for debian\-installer. Note that only firmware packages available -within the configured archive areas are included, e.g. an image with -packages from main only will not automatically include firmware from -non\-free. This option does not interfere with explicitly listed packages in -binary package lists. -.IP "\fB\-\-firmware\-chroot\fP true|false" 4 -defines if firmware packages should be automatically included into the live -image. Note that only firmware packages available within the configured -archive areas are included, e.g. an image with packages from main only will -not automatically include firmware from non\-free. This option does not -interfere with explicitly listed packages in chroot package lists. -.IP "\fB\-\-swap\-file\-path\fP \fIPATH\fP" 4 -defines the path to a swap file to create in the binary image. Default is -not to create a swap file. -.IP "\fB\-\-swap\-file\-size\fP \fIMB\fP" 4 -defines what size in megabytes the swap file should be, if one is to be -created. Default is 512MB. -.IP "\fB\-\-tasksel\fP apt|aptitude|tasksel" 4 -selects which program is used to install tasks. By default, this is set to -tasksel. -.IP "\fB\-\-templates\fP \fIPATH\fP" 4 -sets the path to the templates that live\-build is going to use, e.g. for -bootloaders. By default, this is set to /usr/share/live/build/templates/. -.IP "\fB\-\-hdd\-size\fP MB" 4 -defines what size the hdd image should be. Note that although the default is -set to 10000 (= 10GB), it will not need 10GB space on your harddisk as the -files are created as sparse files. -.IP "\fB\-\-updates\fP true|false" 4 -defines if debian updates package archives should be included in the image -or not. -.IP "\fB\-\-backports\fP true|false" 4 -defines if debian backports package archives should be included in the image -or not. -.IP "\fB\-\-exposed\-root\fP true|false" 4 -defines whether to expose the root filesystem as read only and not covered -by the union filesystem. This has useful implications for certain speciality -setups such as LTSP. By default, this option is false. -.IP \fB\-\-verbose\fP 4 -increases the verbosity of messages output by \fBlb build\fP. -.IP "\fB\-\-win32\-loader true|false\fP" 4 -.\" FIXME -defines if win32\-loader should be included in the binary image or not. - -.SH ENVIRONMENT -.\" FIXME -Currently, command line switches can also be specified through the -corresponding environment variable. However, this generally should not be -relied upon, as it is an implementation detail that is subject to change in -future releases. For options applying directly to live\-build, environment -variables are named LB_FOO, meaning, e.g. \fB\-\-apt\-ftp\-proxy\fP becomes -LB_APT_FTP_PROXY (the exception being internal options such as -\fB\-\-debug\fP). For options passed to another program, as in APT_OPTIONS or -GZIP_OPTIONS, no LB_ prefix is used. - - -.\" FIXME -.SH FILES -.\" FIXME -.IP \fBauto/config\fP 4 -.IP "\fB/etc/live/build.conf, /etc/live/build/*\fP" 4 -.\" FIXME -An optional, global configuration file for \fBlb config\fP variables. It is -useful to specify a few system wide defaults, like -LB_PARENT_MIRROR_BOOTSTRAP. This feature can be false by specifying the -\fB\-\-ignore\-system\-defaults\fP option. - -.SH "SEE ALSO" -\fIlive\-build\fP(7) -.PP -\fIlive\-boot\fP(7) -.PP -\fIlive\-config\fP(7) -.PP -This program is a part of live\-build. - -.SH HOMEPAGE -More information about live\-build and the Debian Live project can be found -on the homepage at <\fIhttp://live.debian.net/\fP> and in the manual at -<\fIhttp://live.debian.net/manual/\fP>. - -.SH BUGS -Bugs can be reported by submitting a bugreport for the live\-build package in -the Debian Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by -writing a mail to the Debian Live mailing list at -<\fIdebian\-live@lists.debian.org\fP>. - -.SH AUTHOR -live\-build was written by Daniel Baumann <\fIdaniel@debian.org\fP> for -the Debian project. |