| Age | Commit message (Collapse) | Author |
|---|
|
this function takes one or more required stage fileS _plural_, and exits
if any are missing (or at least it does now after the refactor).
let's rename it to make things more clear
Gbp-Dch: Short
|
|
as suggested by Raphaël
rather than have fixed stagefile filename strings at all in the scripts,
use `$(basename $0)` to use the name of the script (which is the same for
almost all cases anyway, and the stage files are supposed to be almost
exclusively unique per-script). we can thus simplify things by determining
the filename for most use cases within the functions themselves.
this does change the file used by a couple of scripts, affecting backwards
compatibility of executing live-build upon an existing partially or fully
completed build:
- binary_grub-pc used "binary_grub"
- chroot_includes used "includes.chroot"
care had to be taken for the following cases:
- there are some cases like bootstrap_cache, source_debian and
bootstrap_debootstrap which are dealing with more than one file, and/or
otherwise a filename that is not specific to the script itself exactly,
or should not be based upon its name.
- some cases like chroot_cache, bootstrap_cache and
chroot_install-packages need to append something to the end of the name
depending upon which pass/action mode the script is being executed with.
- furthermore in the bootstrap_cache case one of the filenames is used
within the bootstrap_debootstrap and thus needs very careful handling
to be certain that a change in filename of bootstrap_cache does not
break bootstrap_debootstrap.
Gbp-Dch: Short
|
|
- avoid all need to pass ".build/" path in stage file names into the
functions
- add a helper to remove a stage file (required to complete the above
properly)
- avoid duplicating filenames within scripts which makes them prone to
mistakes (some instances of which I've actually encountered and had
to fix)
Gbp-Dch: Short
|
|
all vars affected have been carefully checked to be quite certain
that they are definitely local
where variable is assigned the return value of a function/command, the
local "declaration" is deliberately done on a separate line, since
`local FOO` is actually treated itself as a command rather than a
declaration; will thus always cause $? to be zero, and thus if done on
the same line as such an assignment can not only clobber $? but in doing
so unintentionally blocks failure of a command from triggering the
expected exit from having `set -e`.
also, from testing, i have found that when assigning "${@}" this must be
done on a separate line confusingly as otherwise an error occurs.
Gbp-Dch: Short
|
|
Following the official Debian install disks
Gbp-Dch: Short
|
|
The '---' delimiter should appear before the final 'quiet' parameter
(which is used by the debian installer I believe).
This delimiter is added by live-build in syslinux configs, and is present
in both grub2 and syslinux configs in an official debian 7.7 disc image,
suggesting strongly that live-build grub/grub2 menu creation code is in
the wrong here by missing it.
update: this commit previously used -- as was correct at the time, and has
since been updated to use --- per #775128; which was previously tackled in
a separate later commit. the switch to --- was already done for syslinux
(which was not missing the delimiter unlike grub) in
ba6b9adeff634845a9ab7cbd5218257a7aa254ab
Gbp-Dch: Short
Closes: #775143
|
|
I believe that the `quiet` parameter is meant for d-i not the kernel and
thus should be given on the end after a delimiter, as done with syslinux.
Here we switch the order to move it to the end. The addition of the missing
delimiter will be done in a followup commit.
(See #775143)
Gbp-Dch: Short
|
|
When building grub2 menu entries the quiet param (meant for d-i)
was excluded from the rescue menu entries instead of expert.
This is the opposite to what is done in the following:
- Menu entries seen in official debian 7.7 disc images (grub2 and syslinux configs)
- Menu entries created for grub (legacy)
- Menu entries created for syslinux
The evidence strongly suggests that the grub2 menu creation was in the wrong!
(See #775143)
Gbp-Dch: Short
|
|
Gbp-Dch: Ignore
|
|
Combine the check+create done in each script. (The original functions
are still callable as before, but a new combined `Aquire_lockfile`
function can be called instead, as now used).
Note, a further simplification could be done in removing the passing of
the lock filename in as a parameter since every use of the functions is
with ".lock". The lock functions already have a fallback to ".build/lock"
though. Checking the history, the fallback used to be for a system wide
lock, which was then replaced with this config-tree specific one. As long
as that is not used implicitly by 3rd-party hooks then surely we are free
to change the fallback to ".lock" and further remove passing in a name as
a param...?
history:
db5d2b0dcdae96e712661605e17bc9875e224f9f
0aa8289a3773fd8a3885090b72622c2f95ab099c
Gbp-Dch: Short
Closes: #952918
|
|
(part of never completed side-by-side multi archi support)
Several scripts make a call to a function called Check_multiarchitectures,
the purpose of which is to adjust the target directory that certain 'live'
and 'install' files are located in. The idea is that a script sets up
'DESTDIR', 'DESTDIR_LIVE' and 'DESTDIR_INSTALL' as appropriate and then
the script appends a suitable arch dependant postfix to the directory
name, depending upon the arch currently being targetted. This would allow
the script to be run multiple times, each for a different architecture.
This is a part of an implementation of allowing multiple architectures to
sit side by side within the same live image, selectable from the
bootloader menus. (As opposed to multiple architectures mixed within the
same userland).
This is evidently the case both from the fact that:
1) The arch specific postfix chosen in that function depends on a var
called LB_CURRENT_ARCHITECTURE, which is never set. In fact going
back through the git history to the introduction of the function in
0d5ff4ca7596790f853cf637e0fe225cad810a76, the var (even considering
var name changes) has never been set by anything. So effectively the
call to the function has been entirely redundant all this time.
2) The major build stages do not perform multiple executions of substages
per arch. Thus from this perspective it seems that the support was
never fully implemented.
3) If any doubt remained, there is an old branch called 'tmp-multiarch'
which has a couple of commits making progress with completing support,
such as implementing the above missing pieces.
The above mentioned branch is 10 years old and can be considered abandoned.
It is not clear whether the original author ever intended to complete and
merge this; nor is it at all clear at what stage of completion it was at.
At any rate, imo it is not at all particularly useful to have extra code
and complexity in order to be able to cram multiple environments side by
side in one image, not when CDs/DVDs and even to some extent USB pen drives
are so cheap. And who really needs more than one environment so
desperately on just one such medium.
If this was not enough to justify removal, then there is also the fact that
the support that was implemented has become completely broken over the
years with scripts diverging in terms of the variable names the function
modifies such that they are incompatible with it.
A quick assessment of the state of this latter aspect:
good:
- grub-legacy uses the correct var names so is fine
- memtest similarly good
- installer_debian-installer looks okay
questionable:
- binary_linux-image uses the correct vars but might not select the
right kernel and initrd files to copy (seems to copy all)
bad:
- grub-pc is making a redundant call, after functionality was moved
to the loopback script
- loopback is using the wrong vars (INITFS instead of DESTDIR +
DESTDIR_INSTALL + DESTDIR_LIVE), plus is doing its own amd64+i686
thing anyway, so the function call would achieve nothing anyway.
- syslinux is also using the wrong var names so would not work with
it and is not even making the necessary function call. Also the
install paths are fixed in the hard coded cfg files anyway so this
would need addressing with placeholders and sed replacement, but
then it is not entirely clear how things should work with respect
to install entries and multi-arch anyway, are we having multiple
copies of the installer, one for each target arch and then multiple
copies of the install menus, perhaps under different submenus?
So, this removes the artefacts of this never completed feature.
Gbp-Dch: Short
|
|
Current versions of the project files are built upon versions published
and licensed by Daniel Baumann, but are modified copies of those files and
thus need to be marked as such per licensing requirements (afaik he did
not pass along ownership / licensing rights to anyone when he left the
project). We should also be careful to not be misrepresenting such
modified copies as being attributed to Daniel.
Adding a new copyright line referring to "The Debian Live team" should
suffice for this.
The authorship block in man pages has also similarly been updated.
Notes:
- tweaked a copy of daniel copyright lines stating 2014 instead of 2015.
both of these cases were in files that i had personally introduced in
some of my past merged commits that moved some code around. i don't know
why they stated 2014.
- binary_onie was introduced in 2018, so that has a 2018 date instead of
2016 unlike the rest.
- 'efi-image' is a 3rd-party (Canonical Ltd) work that we bundle, but it
has been modified by 674794a8f4d61a729d2dbd6d99385d2826138694 and
36a3ba76347ef72df1c316312ed3a26aa4b0c816 so I similarly added a
debian live copyright line.
- 'grub-cpmodules' is similar. it was only changed by the indentation fix
of 36a3ba76347ef72df1c316312ed3a26aa4b0c816 but modification is
modification, and this does help cover any possible future changes that
might be made.
|
|
build scripts never call Help() and so the empty HELP strings are pointless.
(when called with --help they call Man()).
Closes: #952859
Gbp-Dch: Short
|
|
Partial fix for #952919
Gbp-Dch: Short
|
|
Closes: #952887
|
|
LB_DEBIAN_INSTALLER_GUI defines whether or not to provide the graphical
installer. the installer_debian-installer script pays attention to it and
does not download it if not wanted. the actual bootloaders however
(both grub2/loopback and syslinux) ignore it, which leaves broken and
unwanted menu entries. this fixes that.
Gbp-Dch: Short
Closes: #952890
|
|
`false` and `none` make no sense as choices for this option. Here we
replace `false` with `none`, and remove `true`.
Note that `true` was treated as an alias for netinst (see the changes to
source_disk and and binary_disk).
For backwards compatibility we still allow `true` and `false` by converting
them to `netinst` and `none` respectively, whilst printing a warning to
encourage users to move to `netinst`/`none`.
Gbp-Dch: Short
Closes: #952864
|
|
including:
- spaces replaced with tabs for consistency
- alignment of `;;` in some case statements changed for consistency
Gbp-Dch: Short
Closes: #952857
|
|
Update feb-2020:
Both grub2 and syslinux were affected by this issue. Someone else's
patch fixing syslinux only just recently got merged in
2735f3bd38d3d2f0c48ea1ce023a27943ef0ab84 but grub2 was still
affected. I had made patches for both in 2015 which never got
merged. This is the grub2 one.
Gbp-Dch: Short
Closes: #952843
|
|
|
|
[hertzog@debian.org:
- Fix conflicts due to renamed variables
]
Signed-off-by: Raphaël Hertzog <hertzog@debian.org>
|
|
Now grub.cfg shows all the kernel options. Before this patch when you
had more than two kernels it only showed the auto option.
Signed-off-by: Raphaël Hertzog <hertzog@debian.org>
|
|
old 486 one.
[hertzog@debian.org:
Also rename the variables for consistency.
]
Signed-off-by: Raphaël Hertzog <hertzog@debian.org>
|
|
grub-pc configuration.
|
|
* Use only long kernel names.
* Put advanced options in a submenu.
* Use distro-agnostic labels.
* Don't generate entries with kernel version when we have a single
version.
|
|
|
|
This is to cover the case of a theme included in that directory.
|
|
|
|
|
|
blind mode in UEFI mode.
|
|
The binary parts of grub-pc are left for the original binary_grub-pc.
As a consequence both /boot/grub/grub.cfg and /boot/grub/loopback.cfg files will be present in any Debian Live CD.
This might be useful to be reused from binary_grub-* bootloaders.
|
|
Development details
--------------------
* This patch has been based originally on: binary_grub2 . It has been
improved thanks to some binary_syslinux bits.
* This patch ensures that binary_loopback_cfg needs is run
before binary_syslinux is run.
The reason is that it reuses some code from binary_syslinux to avoid
problems when binary_syslinux renames the kernel filenames.
* This patch already supports CPU detection
* I haven't tested all the possible scenarios for the script (with the
latest version). When amd64 and 486 Gnu/Linux flavours is used and the
bootloader is syslinux it works ok.
* I have not implemented a disable switch for not generating it.
Usually you always want loopback.cfg to be there.
* Compared to binary_grub2 script I have removed the installation
entries because I did not see any of them in binary_syslinux.
How to test
-----------
These are some steps to easily test if Looback cfg support is working ok.
0) We assume you have generated an iso
1) Make sure you have a partition that Grub understands. Plain ext4 or
vfat should do it.
2) Create directory: /boot/boot-isos/
3) Put the iso file into that directory making sure it has an ISO or iso
extension.
4) Setup your computer to boot from cdrom and use: Super Grub2 Disk
2.00s2 (Hybrid version recommended)
5) Choose Boot manually...
6) Choose Bootable ISOs (in /boot- ... )
7) Choose (the detected) GRUB Loopback Config
(hdN,msodsN)/boot/boot-ios/name-of-the.iso
8) You will be presented your loopback.cfg. Choose anyone of the entries
(unless it does not match your cpu architecture of course).
9) You should boot into your Debian Live without problems (thanks to
findiso boot parametre).
If you ever wanted to test from your grub2 installation instead from
Super Grub2 Disk check: http://www.supergrubdisk.org/wiki/Loopback.cfg
for an example.
|
