path: root/manpages/de/lb_config.de.1

.\"*******************************************************************
.\"
.\" This file was generated with po4a. Translate the source file.
.\"
.\"*******************************************************************
.TH LIVE\-BUILD 1 10.03.2013 4.0~a14\-1 "Debian Live Project"

.SH NAME
\fBlb config\fP \- Create config directory

.SH SYNOPSIS
\fBlb config\fP [\fIlive\-build options\fP]
.PP
.\" FIXME
\fBlb config\fP
.br
  [\fB\-\-apt\fP apt|aptitude]
.br
  [\fB\-\-apt\-ftp\-proxy\fP \fIURL\fP]
.br
  [\fB\-\-apt\-http\-proxy\fP \fIURL\fP]
.br
  [\fB\-\-apt\-indices\fP true|false]
.br
  [\fB\-\-apt\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"]
.br
  [\fB\-\-aptitude\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"]
.br
  [\fB\-\-apt\-pipeline\fP \fIDEPTH\fP]
.br
  [\fB\-\-apt\-recommends\fP true|false]
.br
  [\fB\-\-apt\-secure\fP true|false]
.br
  [\fB\-\-apt\-source\-archives\fP true|false]
.br
  [\-a|\fB\-\-architectures\fP \fIARCHITECTURE\fP]
.br
  [\-b|\fB\-\-binary\-images\fP iso|iso\-hybrid|netboot|tar|hdd]
.br
  [\fB\-\-binary\-filesystem\fP fat16|fat32|ext2|ext3|ext4]
.br
  [\fB\-\-bootappend\-install\fP \fIPARAMETER\fP|\fI"PARAMETERS"\fP]
.br
  [\fB\-\-bootappend\-live\fP \fIPARAMETER\fP|\fI"PARAMETERS"\fP]
.br
  [\fB\-\-bootloader\fP grub|syslinux]
.br
  [\fB\-\-bootstrap\fP cdebootstrap|cdebootstrap\-static|debootstrap]
.br
  [\fB\-\-cache\fP true|false]
.br
  [\fB\-\-cache\-indices\fP true|false]
.br
  [\fB\-\-cache\-packages\fP true|false]
.br
  [\fB\-\-cache\-stages\fP \fISTAGE\fP|\fI"STAGES"\fP]
.br
  [\fB\-\-checksums\fP md5|sha1|sha256|none]
.br
  [\fB\-\-compression\fP bzip2|gzip|lzip|none]
.br
  [\fB\-\-config\fP \fIGIT_URL::GIT_ID\fP]
.br
  [\fB\-\-build\-with\-chroot\fP true|false]
.br
  [\fB\-\-chroot\-filesystem\fP ext2|ext3|ext4|squashfs|jffs2|none]
.br
  [\fB\-\-clean\fP]
.br
  [\-c|\fB\-\-conffile\fP \fIFILE\fP]
.br
  [\fB\-\-debconf\-frontend\fP dialog|editor|noninteractive|readline]
.br
  [\fB\-\-debconf\-priority\fP low|medium|high|critical]
.br
  [\fB\-\-debian\-installer\fP true|cdrom|netinst|netboot|businesscard|live|false]
.br
  [\fB\-\-debian\-installer\-distribution\fP daily|\fICODENAME\fP]
.br
  [\fB\-\-debian\-installer\-preseedfile\fP \fIFILE\fP|\fIURL\fP]
.br
  [\fB\-\-debian\-installer\-gui\fP true|false]
.br
  [\fB\-\-debug\fP]
.br
  [\-d|\fB\-\-distribution\fP \fICODENAME\fP]
.br
  [\fB\-\-parent\-distribution\fP \fICODENAME\fP]
.br
  [\fB\-\-parent\-debian\-installer\-distribution\fP \fICODENAME\fP]
.br
  [\fB\-\-dump\fP]
.br
  [\fB\-\-fdisk\fP fdisk|fdisk.dist]
.br
  [\fB\-\-firmware\-binary true|false\fP]
.br
  [\fB\-\-firmware\-chroot true|false\fP]
.br
  [\fB\-\-force\fP]
.br
  [\fB\-\-grub\-splash\fP \fIFILE\fP]
.br
  [\fB\-\-gzip\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"]
.br
  [\fB\-\-hooks\fP \fIFILE\fP]
.br
  [\fB\-\-ignore\-system\-defaults\fP]
.br
  [\fB\-\-initramfs\fP auto|none|live\-boot|casper]
.br
  [\fB\-\-initramfs\-compression\fP bzip2|gzip|lzma]
.br
  [\fB\-\-initsystem\fP sysvinit|runit|systemd|upstart|none]
.br
  [\fB\-\-interactive\fP shell]
.br
  [\fB\-\-isohybrid\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"]
.br
  [\fB\-\-iso\-application\fP \fINAME\fP]
.br
  [\fB\-\-iso\-preparer\fP \fINAME\fP]
.br
  [\fB\-\-iso\-publisher\fP \fINAME\fP]
.br
  [\fB\-\-iso\-volume\fP \fINAME\fP]
.br
  [\fB\-\-jffs2\-eraseblock\fP \fISIZE\fP]
.br
  [\fB\-\-keyring\-packages\fP \fIPACKAGE|"PACKAGES"\fP]
.br
  [\-k|\fB\-\-linux\-flavours\fP \fIFLAVOUR\fP|\fI"FLAVOURS"\fP]
.br
  [\fB\-\-linux\-packages\fP \fI"PACKAGES"\fP]
.br
  [\fB\-\-losetup\fP losetup|losetup.orig]
.br
  [\fB\-\-memtest\fP memtest86+|memtest86|none]
.br
  [\-m|\fB\-\-parent\-mirror\-bootstrap\fP \fIURL\fP]
.br
  [\fB\-\-parent\-mirror\-chroot\fP \fIURL\fP]
.br
  [\fB\-\-parent\-mirror\-chroot\-security\fP \fIURL\fP]
.br
  [\fB\-\-parent\-mirror\-chroot\-updates\fP \fIURL\fP]
.br
  [\fB\-\-parent\-mirror\-chroot\-backports\fP \fIURL\fP]
.br
  [\fB\-\-parent\-mirror\-binary\fP \fIURL\fP]
.br
  [\fB\-\-parent\-mirror\-binary\-security\fP \fIURL\fP]
.br
  [\fB\-\-parent\-mirror\-binary\-updates\fP \fIURL\fP]
.br
  [\fB\-\-parent\-mirror\-binary\-backports\fP \fIURL\fP]
.br
  [\fB\-\-parent\-mirror\-debian\-installer\fP \fIURL\fP]
.br
  [\fB\-\-mirror\-bootstrap\fP \fIURL\fP]
.br
  [\fB\-\-mirror\-chroot\fP \fIURL\fP]
.br
  [\fB\-\-mirror\-chroot\-security\fP \fIURL\fP]
.br
  [\fB\-\-mirror\-chroot\-updates\fP \fIURL\fP]
.br
  [\fB\-\-mirror\-chroot\-backports\fP \fIURL\fP]
.br
  [\fB\-\-mirror\-binary\fP \fIURL\fP]
.br
  [\fB\-\-mirror\-binary\-security\fP \fIURL\fP]
.br
  [\fB\-\-mirror\-binary\-updates\fP \fIURL\fP]
.br
  [\fB\-\-mirror\-binary\-backports\fP \fIURL\fP]
.br
  [\fB\-\-mirror\-debian\-installer\fP \fIURL\fP]
.br
  [\fB\-\-mode\fP debian|emdebian|progress\-linux|ubuntu]
.br
  [\fB\-\-system\fP live|normal]
.br
  [\fB\-\-net\-root\-filesystem\fP nfs|cfs]
.br
  [\fB\-\-net\-root\-mountoptions\fP \fIOPTIONS\fP]
.br
  [\fB\-\-net\-root\-path\fP \fIPATH\fP]
.br
  [\fB\-\-net\-root\-server\fP \fIIP\fP|\fIHOSTNAME\fP]
.br
  [\fB\-\-net\-cow\-filesystem\fP nfs|cfs]
.br
  [\fB\-\-net\-cow\-mountoptions\fP \fIOPTIONS\fP]
.br
  [\fB\-\-net\-cow\-path\fP \fIPATH\fP]
.br
  [\fB\-\-net\-cow\-server\fP \fIIP\fP|\fIHOSTNAME\fP]
.br
  [\fB\-\-net\-tarball\fP true|false]
.br
  [\fB\-\-quiet\fP]
.br
  [\fB\-\-archives\fP \fIARCHIVE\fP|\fI"ARCHIVES"\fP]
.br
  [\fB\-\-archive\-areas\fP \fIARCHIVE_AREA\fP|\fI"ARCHIVE_AREAS"\fP]
.br
  [\fB\-\-parent\-archive\-areas\fP
\fIPARENT_ARCHIVE_AREA\fP|\fI"PARENT_ARCHIVE_AREAS"\fP]
.br
  [\fB\-\-security\fP true|false]
.br
  [\fB\-\-source\fP true|false]
.br
  [\-s|\fB\-\-source\-images\fP iso|netboot|tar|hdd]
.br
  [\fB\-\-tasksel\fP apt|aptitude|tasksel]
.br
  [\fB\-\-templates\fP \fIPATH\fP]
.br
  [\fB\-\-hdd\-size \fP\fIMB\fP]
.br
  [\fB\-\-updates\fP true|false]
.br
  [\fB\-\-backports\fP true|false]
.br
  [\fB\-\-exposed\-root\fP true|false]
.br
  [\fB\-\-verbose\fP]
.br
.\" FIXME
  [\fB\-\-win32\-loader true|false]\fP

.SH DESCRIPTION
\fBlb config\fP is a high\-level command (porcelain) of \fIlive\-build\fP(7), the
Debian Live tool suite.
.PP
.\" FIXME
\fBlb config\fP populates the configuration directory for live\-build. By
default, this directory is named 'config' and is created in the current
directory where \fBlb config\fP was executed.
.PP
.\" FIXME
Note: Currently \fBlb config\fP tries to be smart and sets defaults for some
options depending on the setting of other options (e.g. which linux packages
to be used depending on if a wheezy system gets build or not). This means
that when generating a new configuration, you should call \fBlb config\fP only
once with all options specified. Calling it several times with only a subset
of the options each can result in non working configurations. This is also
caused by the fact that \fBlb config\fP called with one option only changes
that option, and leaves everything else as is unless its not
defined. However, \fBlb config\fP does warn about know impossible or likely
impossible combinations that would lead to non working live systems. If
unsure, remove config/{binary,bootstrap,chroot,common,source} and call \fBlb
config\fP again.

.SH OPTIONS
In addition to its specific options \fBlb config\fP understands all generic
live\-build options. See \fIlive\-build\fP(7) for a complete list of all generic
live\-build options.
.PP
.\" FIXME
.IP "\fB\-\-apt\fP apt|aptitude" 4
defines if apt\-get or aptitude is used to install packages when building the
image. The default is apt.
.IP "\fB\-\-apt\-ftp\-proxy\fP \fIURL\fP" 4
sets the ftp proxy to be used by apt. By default, this is empty. Note that
this variable is only for the proxy that gets used by apt internally within
the chroot, it is not used for anything else.
.IP "\fB\-\-apt\-http\-proxy\fP \fIURL\fP" 4
sets the http proxy to be used by apt. By default, this is empty. Note that
this variable is only for the proxy that gets used by apt internally within
the chroot, it is not used for anything else.
.IP "\fB\-\-apt\-indices\fP true|false|none" 4
defines if the resulting images should have apt indices or not and defaults
to true. If set to none, no indices are included at all.
.IP "\fB\-\-apt\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4
defines the default options that will be appended to every apt call that is
made inside chroot during the building of the image. By default, this is set
to \-\-yes to allow non\-interactive installation of packages.
.IP "\fB\-\-aptitude\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4
defines the default options that will be appended to every aptitude call
that is made inside chroot during building of the image. By default, this is
set to \-\-assume\-yes to allow non\-interactive installation of packages.
.IP "\fB\-\-apt\-pipeline\fP \fIDEPTH\fP" 4
sets the depth of the apt/aptitude pipeline. In cases where the remote
server is not RFC conforming or buggy (such as Squid 2.0.2) this option can
be a value from 0 to 5 indicating how many outstanding requests APT should
send. A value of zero MUST be specified if the remote host does not properly
linger on TCP connections \- otherwise data corruption will occur. Hosts
which require this are in violation of RFC 2068. By default, live\-build does
not set this option.
.IP "\fB\-\-apt\-recommends\fP true|false" 4
defines if apt should install recommended packages automatically. By
default, this is true except in emdebian mode.
.IP "\fB\-\-apt\-secure\fP true|false" 4
defines if apt should check repository signatures. This is true by default.
.IP "\fB\-\-apt\-source\-archives\fP true|false" 4
defines if deb\-src entries should be included in the resulting live image or
not, defaults to on.
.IP "\-a|\fB\-\-architectures\fP \fIARCHITECTURE\fP" 4
defines the architecture of the to be build image. By default, this is set
to the host architecture. Note that you cannot crossbuild for another
architecture if your host system is not able to execute binaries for the
target architecture natively. For example, building amd64 images on i386 and
vice versa is possile if you have a 64bit capable i386 processor and the
right kernel. But building powerpc images on an i386 system is not possible.
.IP "\-b|\fB\-\-binary\-images\fP iso|iso\-hybrid|netboot|tar|hdd" 4
defines the image type to build. By default, for images using syslinux this
is set to iso\-hybrid to build CD/DVD images that may also be used like hdd
images, for non\-syslinux images, it defaults to iso.
.IP "\fB\-\-binary\-filesystem\fP fat16|fat32|ext2|ext3|ext4" 4
defines the filesystem to be used in the image type. This only has an effect
if the selected binary image type does allow to choose a filesystem. For
example, when selection iso the resulting CD/DVD has always the filesystem
ISO9660. When building hdd images for usb sticks, this is active. Note that
it defaults to fat16 on all architectures except sparc where it defaults to
ext4. Also note that if you choose fat16 and your resulting binary image
gets bigger than 2GB, the binary filesystem automatically gets switched to
fat32.
.IP "\fB\-\-bootappend\-install\fP \fIPARAMETER\fP|\(dq\fIPARAMETERS\fP\(dq" 4
sets boot parameters specific to debian\-installer, if included.
.IP "\fB\-\-bootappend\-live\fP \fIPARAMETER\fP|\(dq\fIPARAMETERS\fP\(dq" 4
sets boot parameters specific to debian\-live. A complete list of boot
parameters can be found in the \fIlive\-boot\fP(7) and \fIlive\-config\fP(7) manual
pages.
.IP "\fB\-\-bootloader\fP grub|syslinux" 4
defines which bootloader is beeing used in the generated image. This has
only an effect if the selected binary image type does allow to choose the
bootloader. For example, if you build a iso, always syslinux (or more
precise, isolinux) is being used. Also note that some combinations of binary
images types and bootloaders may be possible but live\-build does not support
them yet. \fBlb config\fP will fail to create such a not yet supported
configuration and give a explanation about it. For hdd images on amd64 and
i386, the default is syslinux.
.IP "\fB\-\-bootstrap\fP cdebootstrap|cdebootstrap\-static|debootstrap" 4
defines which program is used to bootstrap the debian chroot, default is
debootstrap.
.IP "\fB\-\-cache\fP true|false" 4
defines globally if any cache should be used at all. Different caches can be
controled through the their own options.
.IP "\fB\-\-cache\-indices\fP true|false" 4
defines if downloaded package indices and lists should be cached which is
false by default. Enabling it would allow to rebuild an image completely
offline, however, you would not get updates anymore then.
.IP "\fB\-\-cache\-packages\fP true|false" 4
defines if downloaded packages files should be cached which is true by
default. Disabling it does save space consumtion in your build directory,
but remember that you will cause much unnecessary traffic if you do a couple
of rebuilds. In general you should always leave it true, however, in some
particular rare build setups, it can be faster to refetch packages from the
local network mirror rather than to utilize the local disk.
.IP "\fB\-\-cache\-stages\fP true|false|\fISTAGE\fP|\(dq\fISTAGES\fP\(dq" 4
sets which stages should be cached. By default set to bootstrap. As an
exception to the normal stage names, also rootfs can be used here which does
only cache the generated root filesystem in
filesystem.{dir,ext*,squashfs}. This is useful during development if you
want to rebuild the binary stage but not regenerate the root filesystem all
the time.
.IP "\fB\-\-checksums\fP md5|sha1|sha256|none" 4
defines if the binary image should contain a file called md5sums.txt,
sha1sums.txt and/or sha256sums.txt. These lists all files on the image
together with their checksums. This in turn can be used by live\-boots
built\-in integrity\-check to verify the medium if specified at boot
prompt. In general, this should not be false and is an important feature of
live system released to the public. However, during development of very big
images it can save some time by not calculating the checksums.
.IP "\fB\-\-compression\fP bzip2|gzip|lzip|none" 4
defines the compression program to be used to compress tarballs. Defaults to
gzip.
.IP "\fB\-\-config\fP \fIGIT_URL\fP::\fIGIT_ID\fP" 4
allows to bootstrap a config tree from a git repositories, optionally
appended by a Git Id (branch, commit, tag, etc.).
.IP "\fB\-\-build\-with\-chroot\fP true|false" 4
defines whetever live\-build should use the tools from within the chroot to
build the binary image or not by using and including the host systems
tools. This is a very dangerous option, using the tools of the host system
can lead to tainted and even non\-bootable images if the host systems version
of the required tools (mainly these are the bootloaders such as syslinux and
grub, and the auxilliary tools such as dosfstools, xorriso, squashfs\-tools
and others) do not \fBexactely\fP match what is present at build\-time in the
target distribution. Never do disable this option unless you are \fBexactely\fP
sure what you are doing and have \fBcompletely\fP\fI understood its
consequences.\fP
.IP "\fB\-\-chroot\-filesystem\fP ext2|ext3|ext4|squashfs|jffs2|none" 4
defines which filesystem type should be used for the root filesystem
image. If you use none, then no filesystem image is created and the root
filesystem content is copied on the binary image filesystem as flat
files. Depending on what binary filesystem you have choosen, it may not be
possible to build with such a plain root filesystem, e.g. fat16/fat32 will
not work as linux does not support to run directly on them.
.IP \fB\-\-clean\fP 4
minimizes config directory by automatically removing unused and thus empty
subdirectories.
.IP "\-c|\fB\-\-conffile\fP \fIFILE\fP" 4
using a user specified alternative configuration file in addition to the
normally used one in the config directory.
.IP "\fB\-\-debconf\-frontend\fP dialog|editor|noninteractive|readline" 4
defines what value the debconf frontend should be set to inside the
chroot. Note that setting it to anything by noninteractive, which is the
default, makes your build asking questions during the build.
.IP "\fB\-\-debconf\-priority\fP low|medium|high|critical" 4
defines what value the debconf priority shoul dbe set to inside the
chroot. By default, it is set to critical, which means that almost no
questions are displayed. Note that this only has an effect if you use any
debconf frontend different from noninteractive.
.IP "\fB\-\-debian\-installer\fP true|cdrom|netinst|netboot|businesscard|live|false" 4
defines which type, if any, of the debian\-installer should be included in
the resulting binary image. By default, no installer is included. All
available flavours except live are the identical configurations used on the
installer media produced by regular debian\-cd. When live is choosen, the
live\-installer udeb is included so that debian\-installer will behave
different than usual \- instead of installing the debian system from packages
from the medium or the network, it installs the live system to the disk.
.IP "\fB\-\-debian\-installer\-distribution\fP daily|\fICODENAME\fP" 4
defines the distribution where the debian\-installer files should be taken
out from. Normally, this should be set to the same distribution as the live
system. However, some times, one wants to use a newer or even daily built
installer.
.IP "\fB\-\-debian\-installer\-preseedfile\fP \fIFILE\fP|\fIURL\fP" 4
sets the filename or URL for an optionally used and included preseeding file
for debian\-installer. If config/binary_debian\-installer/preseed.cfg exists,
it will be used by default.
.IP "\fB\-\-debian\-installer\-gui\fP true|false" 4
defines if the debian\-installer graphical GTK interface should be true or
not. In Debian mode and for most versions of Ubuntu, this option is true,
whereas otherwise false, by default.
.IP \fB\-\-debug\fP 4
turn on debugging informational messages.
.IP "\-d|\fB\-\-distribution\fP \fICODENAME\fP" 4
defines the distribution of the resulting live system.
.IP "\-d|\fB\-\-parent\-distribution\fP \fICODENAME\fP" 4
defines the parent distribution for derivatives of the resulting live
system.
.IP "\-d|\fB\-\-parent\-debian\-installer\-distribution\fP \fICODENAME\fP" 4
defines the parent debian\-installer distribution for derivatives of the
resulting live system.
.IP \fB\-\-dump\fP 4
prepares a report of the currently present live system configuration and the
version of live\-build used. This is useful to provide if you submit bug
reports, we do get all informations required for us to locate and replicate
an error.
.IP "\fB\-\-fdisk\fP fdisk|fdisk.dist" 4
sets the filename of the fdisk binary from the host system that should be
used. This is autodetected and does generally not need any customization.
.IP \fB\-\-force\fP 4
forces re\-execution of already run stages. Use only if you know what you are
doing. It is generally safer to use \fBlb clean\fP to clean up before
re\-executing \fBlb build\fP.
.IP "\fB\-\-grub\-splash\fP \fIFILE\fP" 4
defines the name of an optional to be included splash screen graphic for the
grub bootloader.
.IP "\fB\-\-gzip\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4
defines the default options that will be appended to (almost) every gzip
call during the building of the image. By default, this is set to \-\-best to
use highest (but slowest) compression. Dynamically, if the host system
supports it, also \-\-rsyncable is added.
.IP "\fB\-\-hooks\fP \fIFILE\fP" 4
defines which hooks available in /usr/share/live/build/examples/hooks should
be activated. Normally, there are no hooks executed. Make sure you know and
understood the hook before you enable it.
.IP \fB\-\-ignore\-system\-defaults\fP 4
\fBlb config\fP by default reads system defaults from \fI/etc/live/build.conf\fP
and \fI/etc/live/build/*\fP when generating a new live system config
directory. This is useful if you want to set global settings, such as mirror
locations, and don't want to specify them all of the time.
.IP "\fB\-\-initramfs\fP auto|none|live\-boot|casper" 4
sets the name of package that contains the live system specific initramfs
modification. By default, auto is used, which means that at build time of
the image rather than on configuration time, the value will be expanded to
casper when building ubuntu systems, to live\-boot for all other
systems. Using 'none' is useful if the resulting system image should not be
a live image (experimental).
.IP "\fB\-\-initramfs\-compression\fP bzip2|gzip|lzma]"
defines the compression program to be used to compress the
initramfs. Defaults to gzip.
.IP "\fB\-\-interactive\fP shell" 4
defines if after the chroot stage and before the beginning of the binary
stage, a interactive shell login should be spawned in the chroot in order to
allow you to do manual customizations. Once you close the shell with logout
or exit, the build will continue as usual. Note that it's strongly
discouraged to use this for anything else than testing. Modifications that
should be present in all builds of a live system should be properly made
through hooks. Everything else destroys the beauty of being able to
completely automatise the build process and making it non interactive. By
default, this is of course false.
.IP "\fB\-\-isohybrid\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4
defines options to pass to isohybrid.
.IP "\fB\-\-iso\-application\fP \fINAME\fP" 4
sets the APPLICATION field in the header of a resulting CD/DVD image and
defaults to "Debian Live" in debian mode, and to "Emdebian Live" in emdebian
mode, and "Ubuntu Live" in ubuntu mode.
.IP "\fB\-\-iso\-preparer\fP \fINAME\fP" 4
sets the PREPARER field in the header of a resulting CD/DVD image. By
default this is set to "live\-build \fIVERSION\fP;
http://packages.qa.debian.org/live\-build", whereas VERSION is expanded to
the version of live\-build that was used to build the image.
.IP "\fB\-\-iso\-publisher\fP \fINAME\fP" 4
sets the PUBLISHED field in the header of a resulting CD/DVD image. By
default, this is set to 'Debian Live project; http:/live.debian.net/;
debian\-live@lists.debian.org'. Remember to change this to the appropriate
values at latest when you distributing custom and unofficial images.
.IP "\fB\-\-iso\-volume\fP \fINAME\fP" 4
sets the VOLUME field in the header of a resulting CD/DVD and defaults to
\&'(\fIMODE\fP) (\fIDISTRIBUTION\fP) (\fIDATE\fP)' whereas MODE is expanded to the name
of the mode in use, DISTRIBUTION the distribution name, and DATE with the
current date and time of the generation.
.IP "\fB\-\-jffs2\-eraseblock\fP \fISIZE\fP" 4
sets the eraseblock size for a JFFS2 (Second Journalling Flash File System)
filesystem. The default is 64 KiB. If you use an erase block size different
than the erase block size of the target MTD device, JFFS2 may not perform
optimally. If the SIZE specified is below 4096, the units are assumed to be
KiB.
.IP "\fB\-\-keyring\-packages\fP \fIPACKAGE|\(dqPACKAGES\fP\(dq" 4
sets the keyring package or additional keyring packages. By default this is
set to debian\-archive\-keyring.
.IP "\-k|\fB\-\-linux\-flavours\fP \fIFLAVOUR\fP|\(dq\fIFLAVOURS\fP\(dq" 4
sets the kernel flavours to be installed. Note that in case you specify more
than that the first will be configured the default kernel that gets booted.
.IP "\fB\-\-linux\-packages\fP \(dq\fIPACKAGES\fP\(dq" 4
sets the internal name of the kernel packages naming scheme. If you use
debian kernel packages, you will not have to adjust it. If you decide to use
custom kernel packages that do not follow the debian naming scheme, remember
to set this option to the stub of the packages only (for debian this is
linux\-image\-2.6), so that \fISTUB\fP\-\fIFLAVOUR\fP results in a valid package name
(for debian e.g. linux\-image\-2.6\-486). Preferably you use the meta package
name, if any, for the stub, so that your configuration is ABI
independent. Also don't forget that you have to include stubs of the binary
modules packages for unionfs or aufs, and squashfs if you built them
out\-of\-tree.
.IP "\fB\-\-losetup\fP losetup|losetup.orig" 4
sets the filename of the losetup binary from the host system that should be
used. This is autodetected and does generally not need any customization.
.IP "\fB\-\-memtest\fP memtest86+|memtest86|none" 4
defines if memtest, memtest86+ or no memory tester at all should be included
as secondary bootloader configuration. This is only available on amd64 and
i386 and defaults to memtest86+.
.IP "\-m|\fB\-\-parent\-mirror\-bootstrap\fP \fIURL\fP" 4
sets the location of the debian package mirror that should be used to
bootstrap from. This defaults to http://ftp.de.debian.org/debian/ which may
not be a good default if you live outside of Europe.
.IP "\fB\-\-parent\-mirror\-chroot\fP \fIURL\fP" 4
sets the location of the debian package mirror that will be used to fetch
the packages in order to build the live system. By default, this is set to
the value of \-\-parent\-mirror\-bootstrap.
.IP "\fB\-\-parent\-mirror\-chroot\-security\fP \fIURL\fP" 4
sets the location of the debian security package mirror that will be used to
fetch the packages in order to build the live system. By default, this
points to http://security.debian.org/debian/.
.IP "\fB\-\-parent\-mirror\-chroot\-updates\fP \fIURL\fP" 4
sets the location of the debian updates package mirror that will be used to
fetch packages in order to build the live system. By default, this is set to
the value of \-\-parent\-mirror\-chroot.
.IP "\fB\-\-parent\-mirror\-chroot\-backports\fP \fIURL\fP" 4
sets the location of the debian backports package mirror that will be used
to fetch packages in order to build the live system. By default, this points
to http://backports.debian.org/debian\-backports/.
.IP "\fB\-\-parent\-mirror\-binary\fP \fIURL\fP" 4
sets the location of the debian package mirror that should end up configured
in the final image and which is the one a user would see and use. This has
not necessarily to be the same that is used to build the image, e.g. if you
use a local mirror but want to have an official mirror in the image. By
default, 'http://http.debian.net/debian/' is used.
.IP "\fB\-\-parent\-mirror\-binary\-security\fP \fIURL\fP" 4
sets the location of the debian security package mirror that should end up
configured in the final image. By default, 'http://security.debian.org/' is
used.
.IP "\fB\-\-parent\-mirror\-binary\-updates\fP \fIURL\fP" 4
sets the location of the debian updates package mirror that should end up
configured in the final image. By default, the value of
\-\-parent\-mirror\-binary is used.
.IP "\fB\-\-parent\-mirror\-binary\-backports\fP \fIURL\fP" 4
sets the location of the debian backports package mirror that should end up
configured in the final image. By default,
\&'http://backports.debian.org/debian\-backports/' is used.
.IP "\fB\-\-parent\-mirror\-debian\-installer\fP \fIURL\fP" 4
sets the location of the mirror that will be used to fetch the debian
installer images. By default, this points to the same mirror used to build
the live system, i.e. the value of \-\-parent\-mirror\-bootstrap.
.IP "\fB\-\-mirror\-bootstrap\fP \fIURL\fP" 4
sets the location of the debian package mirror that should be used to
bootstrap the derivative from. This defaults to
http://ftp.de.debian.org/debian/ which may not be a good default if you live
outside of Europe.
.IP "\fB\-\-mirror\-chroot\fP \fIURL\fP" 4
sets the location of the debian package mirror that will be used to fetch
the packages of the derivative in order to build the live system. By
default, this is set to the value of \-\-mirror\-bootstrap.
.IP "\fB\-\-mirror\-chroot\-security\fP \fIURL\fP" 4
sets the location of the debian security package mirror that will be used to
fetch the packages of the derivative in order to build the live system. By
default, this points to http://security.debian.org/debian/.
.IP "\fB\-\-mirror\-chroot\-updates\fP \fIURL\fP" 4
sets the location of the debian updates package mirror that will be used to
fetch packages of the derivative in order to build the live system. By
default, this is set to the value of \-\-mirror\-chroot.
.IP "\fB\-\-mirror\-chroot\-backports\fP \fIURL\fP" 4
sets the location of the debian backports package mirror that will be used
to fetch packages of the derivative in order to build the live system. By
default, this points to http://backports.debian.org/debian\-backports/.
.IP "\fB\-\-mirror\-binary\fP \fIURL\fP" 4
sets the location of the derivative package mirror that should end up
configured in the final image and which is the one a user would see and
use. This has not necessarily to be the same that is used to build the
image, e.g. if you use a local mirror but want to have an official mirror in
the image.
.IP "\fB\-\-mirror\-binary\-security\fP \fIURL\fP" 4
sets the location of the derivatives security package mirror that should end
up configured in the final image.
.IP "\fB\-\-mirror\-binary\-updates\fP \fIURL\fP" 4
sets the location of the derivatives updates package mirror that should end
up configured in the final image.
.IP "\fB\-\-mirror\-binary\-backports\fP \fIURL\fP" 4
sets the location of the derivatives backports package mirror that should
end up configured in the final image.
.IP "\fB\-\-mirror\-debian\-installer\fP \fIURL\fP" 4
sets the location of the mirror that will be used to fetch the debian
installer images of the derivative. By default, this points to the same
mirror used to build the live system, i.e. the value of \-\-mirror\-bootstrap.
.IP "\fB\-\-mode\fP debian|emdebian|progress|ubuntu" 4
defines a global mode to load project specific defaults. By default this is
set to debian.
.IP "\fB\-\-system\fP live|normal" 4
defines if the resulting system image should a live system or a normal,
non\-live system.
.IP "\fB\-\-net\-root\-filesystem\fP nfs|cfs" 4
defines the filesystem that will be configured in the bootloader
configuration for your netboot image. This defaults to nfs.
.IP "\fB\-\-net\-root\-mountoptions\fP \fIOPTIONS\fP" 4
sets additional options for mounting the root filesystem in netboot images
and is by default empty.
.IP "\fB\-\-net\-root\-path\fP \fIPATH\fP" 4
sets the file path that will be configured in the bootloader configuration
for your netboot image. This defaults to /srv/debian\-live in debian mode and
to /srv/emebian\-live when being in emdebian mode, and /srv/ubuntu\-live when
in ubuntu mode.
.IP "\fB\-\-net\-root\-server\fP \fIIP\fP|\fIHOSTNAME\fP" 4
sets the IP or hostname that will be configured in the bootloader
configuration for the root filesystem of your netboot image. This defaults
to 192.168.1.1.
.IP "\fB\-\-net\-cow\-filesystem\fP nfs|cfs" 4
defines the filesystem type for the copy\-on\-write layer and defaults to nfs.
.IP "\fB\-\-net\-cow\-mountoptions\fP \fIOPTIONS\fP" 4
sets additional options for mounting the copy\-on\-write layer in netboot
images and is by default empty.
.IP "\fB\-\-net\-cow\-path\fP \fIPATH\fP" 4
defines the path to client writable filesystem. Anywhere that
\fIclient_mac_address\fP is specified in the path live\-boot will substitute the
MAC address of the client delimited with hyphens.
.PP
.IP "" 4
Example:
.br
/export/hosts/client_mac_address
.br
/export/hosts/00\-16\-D3\-33\-92\-E8
.IP "\fB\-\-net\-cow\-server\fP \fIIP\fP|\fIHOSTNAME\fP" 4
sets the IP or hostname that will be configured in the bootloader
configuration for the copy\-on\-write filesystem of your netboot image and is
by default empty.
.IP "\fB\-\-net\-tarball\fP true|false" 4
defines if a compressed tarball should be created. Disabling this options
leads to no tarball at all, the plain binary directory is considered the
output in this case. Default is true.
.IP \fB\-\-quiet\fP 4
reduces the verbosity of messages output by \fBlb build\fP.
.IP "\fB\-\-archives\fP \fIARCHIVE\fP|\(dq\fIARCHIVES\fP\(dq" 4
enables one of available third\-party archive configurations in
/usr/share/live/build/archives.
.IP "\fB\-\-archive\-areas\fP \fIARCHIVE_AREA\fP|\(dq\fIARCHIVE_AREAS\fP\(dq" 4
defines which package archive areas of a debian packages archive should be
used for configured debian package mirrors. By default, this is set to
main. Remember to check the licenses of each packages with respect to their
redistributability in your juristiction when enabling contrib or non\-free
with this mechanism.
.IP "\fB\-\-parent\-archive\-areas\fP \fIPARENT_ARCHIVE_AREA\fP|\(dq\fIPARENT_ARCHIVE_AREAS\fP\(dq" 4
defines the archive areas for derivatives of the resulting live system.
.IP "\fB\-\-security\fP true|false" 4
defines if the security repositories specified in the security mirror
options should be used or not.
.IP "\fB\-\-source\fP true|false" 4
defines if a corresponding source image to the binary image should be
build. By default this is false because most people do not require this and
would require to download quite a few source packages. However, once you
start distributing your live image, you should make sure you build it with a
source image alongside.
.IP "\-s|\fB\-\-source\-images\fP iso|netboot|tar|hdd" 4
defines the image type for the source image. Default is tar.
.IP "\fB\-\-firmware\-binary\fP true|false" 4
defines if firmware packages should be automatically included into the
binary pool for debian\-installer. Note that only firmware packages available
within the configured archive areas are included, e.g. an image with
packages from main only will not automatically include firmware from
non\-free. This option does not interfere with explicitly listed packages in
binary package lists.
.IP "\fB\-\-firmware\-chroot\fP true|false" 4
defines if firmware packages should be automatically included into the live
image. Note that only firmware packages available within the configured
archive areas are included, e.g. an image with packages from main only will
not automatically include firmware from non\-free. This option does not
interfere with explicitly listed packages in chroot package lists.
.IP "\fB\-\-swap\-file\-path\fP \fIPATH\fP" 4
defines the path to a swap file to create in the binary image. Default is
not to create a swap file.
.IP "\fB\-\-swap\-file\-size\fP \fIMB\fP" 4
defines what size in megabytes the swap file should be, if one is to be
created. Default is 512MB.
.IP "\fB\-\-tasksel\fP apt|aptitude|tasksel" 4
selects which program is used to install tasks. By default, this is set to
tasksel.
.IP "\fB\-\-templates\fP \fIPATH\fP" 4
sets the path to the templates that live\-build is going to use, e.g. for
bootloaders. By default, this is set to /usr/share/live/build/templates/.
.IP "\fB\-\-hdd\-size\fP MB" 4
defines what size the hdd image should be. Note that although the default is
set to 10000 (= 10GB), it will not need 10GB space on your harddisk as the
files are created as sparse files.
.IP "\fB\-\-updates\fP true|false" 4
defines if debian updates package archives should be included in the image
or not.
.IP "\fB\-\-backports\fP true|false" 4
defines if debian backports package archives should be included in the image
or not.
.IP "\fB\-\-exposed\-root\fP true|false" 4
defines whether to expose the root filesystem as read only and not covered
by the union filesystem. This has useful implications for certain speciality
setups such as LTSP. By default, this option is false.
.IP \fB\-\-verbose\fP 4
increases the verbosity of messages output by \fBlb build\fP.
.IP "\fB\-\-win32\-loader true|false\fP" 4
.\" FIXME
defines if win32\-loader should be included in the binary image or not.

.SH ENVIRONMENT
.\" FIXME
Currently, command line switches can also be specified through the
corresponding environment variable. However, this generally should not be
relied upon, as it is an implementation detail that is subject to change in
future releases. For options applying directly to live\-build, environment
variables are named LB_FOO, meaning, e.g. \fB\-\-apt\-ftp\-proxy\fP becomes
LB_APT_FTP_PROXY (the exception being internal options such as
\fB\-\-debug\fP). For options passed to another program, as in APT_OPTIONS or
GZIP_OPTIONS, no LB_ prefix is used.


.\" FIXME
.SH FILES
.\" FIXME
.IP \fBauto/config\fP 4
.IP "\fB/etc/live/build.conf, /etc/live/build/*\fP" 4
.\" FIXME
An optional, global configuration file for \fBlb config\fP variables. It is
useful to specify a few system wide defaults, like
LB_PARENT_MIRROR_BOOTSTRAP. This feature can be false by specifying the
\fB\-\-ignore\-system\-defaults\fP option.

.SH "SEE ALSO"
\fIlive\-build\fP(7)
.PP
\fIlive\-boot\fP(7)
.PP
\fIlive\-config\fP(7)
.PP
This program is a part of live\-build.

.SH HOMEPAGE
More information about live\-build and the Debian Live project can be found
on the homepage at <\fIhttp://live.debian.net/\fP> and in the manual at
<\fIhttp://live.debian.net/manual/\fP>.

.SH BUGS
Bugs can be reported by submitting a bugreport for the live\-build package in
the Debian Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by
writing a mail to the Debian Live mailing list at
<\fIdebian\-live@lists.debian.org\fP>.

.SH AUTHOR
live\-build was written by Daniel Baumann <\fIdaniel@debian.org\fP> for
the Debian project.