Import initial strongswan 2.7.0 version into SVN.

1 files changed, 314 insertions, 0 deletions

diff --git a/testing/hosts/dave/etc/init.d/net.eth0 b/testing/hosts/dave/etc/init.d/net.eth0
new file mode 100755
index 000000000..fa1200242
--- /dev/null
+++ b/testing/hosts/dave/etc/init.d/net.eth0
@@ -0,0 +1,314 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+
+#NB: Config is in /etc/conf.d/net
+
+if [[ -n $NET_DEBUG ]]; then
+	set -x
+	devnull=/dev/stderr
+else
+	devnull=/dev/null
+fi
+
+# For pcmcia users. note that pcmcia must be added to the same
+# runlevel as the net.* script that needs it.
+depend() {
+	use hotplug pcmcia
+}
+
+checkconfig() {
+	if [[ -z "${ifconfig_IFACE}" ]]; then
+		eerror "Please make sure that /etc/conf.d/net has \$ifconfig_$IFACE set"
+		eerror "(or \$iface_$IFACE for old-style configuration)"
+		return 1
+	fi
+	if [[ -n "${vlans_IFACE}" && ! -x /sbin/vconfig ]]; then
+		eerror "For VLAN (802.1q) support, emerge net-misc/vconfig"
+		return 1
+	fi
+}
+
+# Fix bug 50039 (init.d/net.eth0 localization)
+# Some other commands in this script might need to be wrapped, but
+# we'll get them one-by-one.  Note that LC_ALL trumps LC_anything_else
+# according to locale(7)
+ifconfig() {
+	LC_ALL=C /sbin/ifconfig "$@"
+}
+
+# setup_vars: setup variables based on $1 and content of /etc/conf.d/net
+# The following variables are set, which should be declared local by
+# the calling routine.
+#	status_IFACE			(up or '')
+#	vlans_IFACE				(space-separated list)
+#	ifconfig_IFACE			(array of ifconfig lines, replaces iface_IFACE)
+#	dhcpcd_IFACE			(command-line args for dhcpcd)
+#	routes_IFACE			(array of route lines)
+#	inet6_IFACE				(array of inet6 lines)
+#	ifconfig_fallback_IFACE	(fallback ifconfig if dhcp fails)
+setup_vars() {
+	local i iface="${1//\./_}"
+
+	status_IFACE="$(ifconfig ${1} 2>${devnull} | gawk '$1 == "UP" {print "up"}')"
+	eval vlans_IFACE=\"\$\{iface_${iface}_vlans\}\"
+	eval ifconfig_IFACE=( \"\$\{ifconfig_$iface\[@\]\}\" )
+	eval dhcpcd_IFACE=\"\$\{dhcpcd_$iface\}\"
+	eval routes_IFACE=( \"\$\{routes_$iface\[@\]\}\" )
+	eval inet6_IFACE=( \"\$\{inet6_$iface\[@\]\}\" )
+	eval ifconfig_fallback_IFACE=( \"\$\{ifconfig_fallback_$iface\[@\]\}\" )
+
+	# BACKWARD COMPATIBILITY: populate the ifconfig_IFACE array
+	# if iface_IFACE is set (fex. iface_eth0 instead of ifconfig_eth0)
+	eval local iface_IFACE=\"\$\{iface_$iface\}\"
+	if [[ -n ${iface_IFACE} && -z ${ifconfig_IFACE} ]]; then
+		# Make sure these get evaluated as arrays
+		local -a aliases broadcasts netmasks
+
+		# Start with the primary interface
+		ifconfig_IFACE=( "${iface_IFACE}" )
+
+		# ..then add aliases
+		eval aliases=( \$\{alias_$iface\} )
+		eval broadcasts=( \$\{broadcast_$iface\} )
+		eval netmasks=( \$\{netmask_$iface\} )
+		for ((i = 0; i < ${#aliases[@]}; i = i + 1)); do
+			ifconfig_IFACE[i+1]="${aliases[i]} ${broadcasts[i]:+broadcast ${broadcasts[i]}} ${netmasks[i]:+netmask ${netmasks[i]}}"
+		done
+	fi
+
+	# BACKWARD COMPATIBILITY: check for space-separated inet6 addresses
+	if [[ ${#inet6_IFACE[@]} == 1 && ${inet6_IFACE} == *' '* ]]; then
+		inet6_IFACE=( ${inet6_IFACE} )
+	fi
+}
+
+iface_start() {
+	local IFACE=${1} i x retval
+	checkconfig || return 1
+
+	if [[ ${ifconfig_IFACE} != dhcp ]]; then
+		# Show the address, but catch if this interface will be inet6 only
+		i=${ifconfig_IFACE%% *}
+		if [[ ${i} == *.*.*.* ]]; then
+			ebegin "Bringing ${IFACE} up (${i})"
+		else
+			ebegin "Bringing ${IFACE} up"
+		fi
+		# ifconfig does not always return failure ..
+		ifconfig ${IFACE} ${ifconfig_IFACE} >${devnull} && \
+		ifconfig ${IFACE} up &>${devnull}
+		eend $? || return $?
+	else
+		# Check that eth0 was not brought up by the kernel ...
+		if [[ ${status_IFACE} == up ]]; then
+			einfo "Keeping kernel configuration for ${IFACE}"
+		else
+			ebegin "Bringing ${IFACE} up via DHCP"
+			/sbin/dhcpcd ${dhcpcd_IFACE} ${IFACE}
+			retval=$?
+			eend $retval
+			if [[ $retval == 0 ]]; then
+				# DHCP succeeded, show address retrieved
+				i=$(ifconfig ${IFACE} | grep -m1 -o 'inet addr:[^ ]*' | 
+					cut -d: -f2)
+				[[ -n ${i} ]] && einfo "  ${IFACE} received address ${i}"
+			elif [[ -n "${ifconfig_fallback_IFACE}" ]]; then
+				# DHCP failed, try fallback.
+				# Show the address, but catch if this interface will be inet6 only
+				i=${ifconfig_fallback_IFACE%% *}
+				if [[ ${i} == *.*.*.* ]]; then
+					ebegin "Using fallback configuration (${i}) for ${IFACE}"
+				else
+					ebegin "Using fallback configuration for ${IFACE}"
+				fi
+				ifconfig ${IFACE} ${ifconfig_fallback_IFACE} >${devnull} && \
+				ifconfig ${IFACE} up &>${devnull}
+				eend $? || return $?
+			else
+				return $retval
+			fi
+		fi
+	fi
+
+	if [[ ${#ifconfig_IFACE[@]} -gt 1 ]]; then
+		einfo "  Adding aliases"
+		for ((i = 1; i < ${#ifconfig_IFACE[@]}; i = i + 1)); do
+			ebegin "    ${IFACE}:${i} (${ifconfig_IFACE[i]%% *})"
+			ifconfig ${IFACE}:${i} ${ifconfig_IFACE[i]}
+			eend $?
+		done
+	fi
+
+	if [[ -n ${inet6_IFACE} ]]; then
+		einfo "  Adding inet6 addresses"
+		for ((i = 0; i < ${#inet6_IFACE[@]}; i = i + 1)); do
+			ebegin "    ${IFACE} inet6 add ${inet6_IFACE[i]}"
+			ifconfig ${IFACE} inet6 add ${inet6_IFACE[i]} >${devnull}
+			eend $?
+		done
+	fi
+
+	# Set static routes
+	if [[ -n ${routes_IFACE} ]]; then
+		einfo "  Adding routes"
+		for ((i = 0; i < ${#routes_IFACE[@]}; i = i + 1)); do
+			ebegin "    ${routes_IFACE[i]}"
+			/sbin/route add ${routes_IFACE[i]}
+			eend $?
+		done
+	fi
+
+	# Set default route if applicable to this interface
+	if [[ ${gateway} == ${IFACE}/* ]]; then
+		local ogw=$(/bin/netstat -rn | awk '$1 == "0.0.0.0" {print $2}')
+		local gw=${gateway#*/}
+		if [[ ${ogw} != ${gw} ]]; then
+			ebegin "  Setting default gateway ($gw)"
+
+			# First delete any existing route if it was setup by kernel...
+			/sbin/route del default dev ${IFACE} &>${devnull}
+
+			# Second delete old gateway if it was set...
+			/sbin/route del default gw ${ogw} &>${devnull}
+
+			# Third add our new default gateway
+			/sbin/route add default gw ${gw} >${devnull}
+			eend $? || {
+				true # need to have some command in here
+				# Note: This originally called stop, which is obviously
+				# wrong since it's calling with a local version of IFACE.
+				# The below code works correctly to abort configuration of
+				# the interface, but is commented because we're assuming
+				# that default route failure should not cause the interface
+				# to be unconfigured.
+				#local error=$?
+				#ewarn "Aborting configuration of ${IFACE}"
+				#iface_stop ${IFACE}
+				#return ${error}
+			}
+		fi
+	fi
+
+	# Enabling rp_filter causes wacky packets to be auto-dropped by
+	# the kernel.  Note that we only do this if it is not set via
+	# /etc/sysctl.conf ...
+	if [[ -e /proc/sys/net/ipv4/conf/${IFACE}/rp_filter && \
+			-z "$(grep -s '^[^#]*rp_filter' /etc/sysctl.conf)" ]]; then
+		echo -n 1 > /proc/sys/net/ipv4/conf/${IFACE}/rp_filter
+	fi
+}
+
+# iface_stop: bring down an interface.  Don't trust information in
+# /etc/conf.d/net since the configuration might have changed since
+# iface_start ran.  Instead query for current configuration and bring
+# down the interface.
+iface_stop() {
+	local IFACE=${1} i x aliases inet6 count
+
+	# Try to do a simple down (no aliases, no inet6, no dhcp)
+	aliases="$(ifconfig | grep -o "^$IFACE:[0-9]*" | tac)"
+	inet6="$(ifconfig ${IFACE} | awk '$1 == "inet6" {print $2}')"
+	if [[ -z ${aliases} && -z ${inet6} && ! -e /var/run/dhcpcd-${IFACE}.pid ]]; then
+		ebegin "Bringing ${IFACE} down"
+		ifconfig ${IFACE} down &>/dev/null
+		eend 0
+		return 0
+	fi
+
+	einfo "Bringing ${IFACE} down"
+
+	# Stop aliases before primary interface.
+	# Note this must be done in reverse order, since ifconfig eth0:1 
+	# will remove eth0:2, etc.  It might be sufficient to simply remove 
+	# the base interface but we're being safe here.
+	for i in ${aliases} ${IFACE}; do
+
+		# Delete all the inet6 addresses for this interface
+		inet6="$(ifconfig ${i} | awk '$1 == "inet6" {print $3}')"
+		if [[ -n ${inet6} ]]; then
+			einfo "  Removing inet6 addresses"
+			for x in ${inet6}; do 
+				ebegin "    ${IFACE} inet6 del ${x}"
+				ifconfig ${i} inet6 del ${x}
+				eend $?
+			done
+		fi
+
+		# Stop DHCP (should be N/A for aliases)
+		# Don't trust current configuration... investigate ourselves
+		if /sbin/dhcpcd -z ${i} &>${devnull}; then
+			ebegin "  Releasing DHCP lease for ${IFACE}"
+			for ((count = 0; count < 9; count = count + 1)); do
+				/sbin/dhcpcd -z ${i} &>${devnull} || break
+				sleep 1
+			done
+			[[ ${count} -lt 9 ]]
+			eend $? "Timed out"
+		fi
+		ebegin "  Stopping ${i}"
+		ifconfig ${i} down &>${devnull}
+		eend 0
+	done
+
+	return 0
+}
+
+start() {
+	# These variables are set by setup_vars
+	local status_IFACE vlans_IFACE dhcpcd_IFACE 
+	local -a ifconfig_IFACE routes_IFACE inet6_IFACE
+
+	# Call user-defined preup function if it exists
+	if [[ $(type -t preup) == function ]]; then
+		einfo "Running preup function"
+		preup ${IFACE} || {
+			eerror "preup ${IFACE} failed"
+			return 1
+		}
+	fi
+
+	# Start the primary interface and aliases
+	setup_vars ${IFACE}
+	iface_start ${IFACE} || return 1
+
+	# Start vlans
+	local vlan
+	for vlan in ${vlans_IFACE}; do
+		/sbin/vconfig add ${IFACE} ${vlan} >${devnull}
+		setup_vars ${IFACE}.${vlan}
+		iface_start ${IFACE}.${vlan}
+	done
+
+	# Call user-defined postup function if it exists
+	if [[ $(type -t postup) == function ]]; then
+		einfo "Running postup function"
+		postup ${IFACE}
+	fi
+}
+
+stop() {
+	# Call user-defined predown function if it exists
+	if [[ $(type -t predown) == function ]]; then
+		einfo "Running predown function"
+		predown ${IFACE}
+	fi
+
+	# Don't depend on setup_vars since configuration might have changed.
+	# Investigate current configuration instead.
+	local vlan
+	for vlan in $(ifconfig | grep -o "^${IFACE}\.[^ ]*"); do
+		iface_stop ${vlan}
+		/sbin/vconfig rem ${vlan} >${devnull}
+	done
+
+	iface_stop ${IFACE} || return 1  # always succeeds, btw
+
+	# Call user-defined postdown function if it exists
+	if [[ $(type -t postdown) == function ]]; then
+		einfo "Running postdown function"
+		postdown ${IFACE}
+	fi
+}
+
+# vim:ts=4