[svn-upgrade] new version strongswan (4.4.1)

3 files changed, 0 insertions, 183 deletions

diff --git a/testing/tests/ike2/hosts/moon/etc/ipsec.conf b/testing/tests/ike2/hosts/moon/etc/ipsec.conf
deleted file mode 100755
index e43e0d785..000000000
--- a/testing/tests/ike2/hosts/moon/etc/ipsec.conf
+++ /dev/null
@@ -1,25 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-        crlcheckinterval=180
-	strictcrlpolicy=no
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-	mobike=no
-
-conn net-net 
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	leftid=@moon.strongswan.org
-	leftsourceip=%config
-	leftupdown=/etc/nat_updown
-	right=PH_IP_SUN
-	rightid=@sun.strongswan.org
-	rightsubnet=10.2.0.0/16
-	auto=add
diff --git a/testing/tests/ike2/hosts/moon/etc/nat_updown b/testing/tests/ike2/hosts/moon/etc/nat_updown
deleted file mode 100755
index aab1df687..000000000
--- a/testing/tests/ike2/hosts/moon/etc/nat_updown
+++ /dev/null
@@ -1,152 +0,0 @@
-#! /bin/sh
-# NAT updown script
-#
-# Copyright (C) 2010 Andreas Steffen <andreas.steffen@strongswan.org>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation; either version 2 of the License, or (at your
-# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-
-# things that this script gets (from ipsec_pluto(8) man page)
-#
-#      PLUTO_VERSION
-#              indicates  what  version of this interface is being
-#              used.  This document describes version  1.1.   This
-#              is upwardly compatible with version 1.0.
-#
-#       PLUTO_VERB
-#              specifies the name of the operation to be performed
-#              (prepare-host, prepare-client, up-host, up-client,
-#              down-host, or down-client).  If the address family
-#              for security gateway to security gateway communica-
-#              tions is IPv6, then a suffix of -v6 is added to the
-#              verb.
-#
-#       PLUTO_CONNECTION
-#              is the name of the  connection  for  which  we  are
-#              routing.
-#
-#       PLUTO_NEXT_HOP
-#              is the next hop to which packets bound for the peer
-#              must be sent.
-#
-#       PLUTO_INTERFACE
-#              is the name of the ipsec interface to be used.
-#
-#       PLUTO_REQID
-#              is the requid of the ESP policy
-#
-#       PLUTO_ME
-#              is the IP address of our host.
-#
-#       PLUTO_MY_ID
-#              is the ID of our host.
-#
-#       PLUTO_MY_CLIENT
-#              is the IP address / count of our client subnet.  If
-#              the  client  is  just  the  host,  this will be the
-#              host's own IP address / max (where max  is  32  for
-#              IPv4 and 128 for IPv6).
-#
-#       PLUTO_MY_CLIENT_NET
-#              is the IP address of our client net.  If the client
-#              is just the host, this will be the  host's  own  IP
-#              address.
-#
-#       PLUTO_MY_CLIENT_MASK
-#              is  the  mask for our client net.  If the client is
-#              just the host, this will be 255.255.255.255.
-#
-#       PLUTO_MY_SOURCEIP
-#              if non-empty, then the source address for the route will be
-#              set to this IP address.
-#
-#       PLUTO_MY_PROTOCOL
-#              is the IP protocol that will be transported.
-#
-#       PLUTO_MY_PORT
-#              is  the  UDP/TCP  port  to  which  the IPsec SA  is
-#              restricted on our side.
-#
-#       PLUTO_PEER
-#              is the IP address of our peer.
-#
-#       PLUTO_PEER_ID
-#              is the ID of our peer.
-#
-#       PLUTO_PEER_CA
-#              is the CA which issued the cert of our peer.
-#
-#       PLUTO_PEER_CLIENT
-#              is the IP address / count of the peer's client sub-
-#              net.   If the client is just the peer, this will be
-#              the peer's own IP address / max (where  max  is  32
-#              for IPv4 and 128 for IPv6).
-#
-#       PLUTO_PEER_CLIENT_NET
-#              is the IP address of the peer's client net.  If the
-#              client is just the peer, this will  be  the  peer's
-#              own IP address.
-#
-#       PLUTO_PEER_CLIENT_MASK
-#              is  the  mask  for  the  peer's client net.  If the
-#              client   is   just   the   peer,   this   will   be
-#              255.255.255.255.
-#
-#       PLUTO_PEER_PROTOCOL
-#              is the IP protocol that will be transported.
-#
-#       PLUTO_PEER_PORT
-#              is  the  UDP/TCP  port  to  which  the IPsec SA  is
-#              restricted on the peer side.
-#
-
-# define a minimum PATH environment in case it is not set
-PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin"
-export PATH
-
-# resolve octal escape sequences
-PLUTO_MY_ID=`printf "$PLUTO_MY_ID"`
-PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"`
-
-case "$PLUTO_VERB:$1" in
-up-host:)
-	# connection to me coming up
-	# If you are doing a custom version, firewall commands go here.
-	;;
-down-host:)
-	# connection to me going down
-	# If you are doing a custom version, firewall commands go here.
-	;;
-up-client:)
-	# connection to my client subnet coming up
-	# If you are doing a custom version, firewall commands go here.
-	iptables -A FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \
-	    -d $PLUTO_PEER_CLIENT -j ACCEPT
-        iptables -A FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \
-            -s $PLUTO_PEER_CLIENT -j ACCEPT
-	iptables -t nat -A POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \
-	    -d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP
-	echo "inserted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2 
-	;;
-down-client:)
-	# connection to my client subnet going down
-	# If you are doing a custom version, firewall commands go here.
-        iptables -D FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \
-            -d $PLUTO_PEER_CLIENT -j ACCEPT
-        iptables -D FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \
-            -s $PLUTO_PEER_CLIENT -j ACCEPT
-         iptables -t nat -D POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \
-            -d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP
-        echo "deleted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2    
-	;;
-*)	echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
-	exit 1
-	;;
-esac
diff --git a/testing/tests/ike2/hosts/moon/etc/strongswan.conf b/testing/tests/ike2/hosts/moon/etc/strongswan.conf
deleted file mode 100644
index 161934454..000000000
--- a/testing/tests/ike2/hosts/moon/etc/strongswan.conf
+++ /dev/null
@@ -1,6 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink socket-raw updown
-  multiple_authentication = no
-}