New upstream release.

6 files changed, 284 insertions, 0 deletions

diff --git a/testing/tests/ike2/hosts/bob/etc/hosts b/testing/tests/ike2/hosts/bob/etc/hosts
new file mode 100644
index 000000000..ee854da09
--- /dev/null
+++ b/testing/tests/ike2/hosts/bob/etc/hosts
@@ -0,0 +1,70 @@
+# /etc/hosts:  This file describes a number of hostname-to-address
+#              mappings for the TCP/IP subsystem.  It is mostly
+#              used at boot time, when no name servers are running.
+#              On small systems, this file can be used instead of a
+#              "named" name server.  Just add the names, addresses
+#              and any aliases to this file...
+#
+
+127.0.0.1	localhost
+
+192.168.0.254	uml0.strongswan.org	uml0
+10.1.0.254	uml1.strongswan.org	uml1
+10.2.0.254	uml1.strongswan.org	uml2
+
+10.1.0.10	alice.strongswan.org	alice
+10.1.0.20	venus.strongswan.org	venus
+10.1.0.1	moon1.strongswan.org	moon1
+192.168.0.1	moon.strongswan.org	moon
+192.168.0.50	alice1.strongswan.org	alice1
+192.168.0.100	carol.strongswan.org	carol
+10.3.0.1	carol1.strongswan.org	carol1
+192.168.0.150	winnetou.strongswan.org	winnetou crl.strongswan.org ocsp.strongswan.org ldap.strongswan.org
+192.168.0.200	dave.strongswan.org	dave
+10.3.0.2	dave1.strongswan.org	dave1
+192.168.0.2	sun.strongswan.org	sun
+10.2.0.1	sun1.strongswan.org	sun1
+10.2.0.10	bob.strongswan.org	bob
+10.4.0.1	alice2.strongswan.org	alice2
+
+# IPv6 versions of localhost and co
+::1 ip6-localhost ip6-loopback
+fe00::0 ip6-localnet
+ff00::0 ip6-mcastprefix
+ff02::1 ip6-allnodes
+ff02::2 ip6-allrouters
+ff02::3 ip6-allhosts
+
+# IPv6 solicited-node multicast addresses
+ff02::1:ff00:1	ip6-mcast-1
+ff02::1:ff00:2	ip6-mcast-2
+ff02::1:ff00:10	ip6-mcast-10
+ff02::1:ff00:15	ip6-mcast-15
+ff02::1:ff00:20	ip6-mcast-20
+
+# IPv6 site-local addresses
+fec0::5		ip6-alice1.strongswan.org   ip6-alice1
+fec1::10	ip6-alice.strongswan.org    ip6-alice
+fec1::20	ip6-venus.strongswan.org    ip6-venus
+fec1::1 	ip6-moon1.strongswan.org    ip6-moon1
+fec0::1 	ip6-moon.strongswan.org     ip6-moon
+fec0::10	ip6-carol.strongswan.org    ip6-carol
+fec3::1 	ip6-carol1.strongswan.org   ip6-carol1
+fec0::15	ip6-winnetou.strongswan.org ip6-winnetou 
+fec0::20	ip6-dave.strongswan.org     ip6-dave
+fec3::2 	ip6-dave1.strongswan.org    ip6-dave1
+fec0::2 	ip6-sun.strongswan.org      ip6-sun
+fec2::1 	ip6-sun1.strongswan.org     ip6-sun1
+fec2::10	ip6-bob.strongswan.org      ip6-bob
+
+# IPv6 link-local HW derived addresses
+fe80::fcfd:0aff:fe01:14	ip6-hw-venus.strongswan.org    ip6-hw-venus
+fe80::fcfd:0aff:fe01:0a	ip6-hw-alice.strongswan.org    ip6-hw-alice
+fe80::fcfd:0aff:fe01:01	ip6-hw-moon1.strongswan.org    ip6-hw-moon1
+fe80::fcfd:c0ff:fea8:01 ip6-hw-moon.strongswan.org     ip6-hw-moon
+fe80::fcfd:c0ff:fea8:64	ip6-hw-carol.strongswan.org    ip6-hw-carol
+fe80::fcfd:c0ff:fea8:96 ip6-hw-winnetou.strongswan.org ip6-hw-winnetou
+fe80::fcfd:c0ff:fea8:c8	ip6-hw-dave.strongswan.org     ip6-hw-dave
+fe80::fcfd:c0ff:fea8:02	ip6-hw-sun.strongswan.org      ip6-hw-sun
+fe80::fcfd:0aff:fe02:01	ip6-hw-sun1.strongswan.org     ip6-hw-sun1
+fe80::fcfd:0aff:fe02:0a ip6-hw-bob.strongswan.org      ip6-hw-bob
diff --git a/testing/tests/ike2/hosts/moon/etc/ipsec.conf b/testing/tests/ike2/hosts/moon/etc/ipsec.conf
new file mode 100755
index 000000000..e43e0d785
--- /dev/null
+++ b/testing/tests/ike2/hosts/moon/etc/ipsec.conf
@@ -0,0 +1,25 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+        crlcheckinterval=180
+	strictcrlpolicy=no
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+	mobike=no
+
+conn net-net 
+	left=PH_IP_MOON
+	leftcert=moonCert.pem
+	leftid=@moon.strongswan.org
+	leftsourceip=%config
+	leftupdown=/etc/nat_updown
+	right=PH_IP_SUN
+	rightid=@sun.strongswan.org
+	rightsubnet=10.2.0.0/16
+	auto=add
diff --git a/testing/tests/ike2/hosts/moon/etc/nat_updown b/testing/tests/ike2/hosts/moon/etc/nat_updown
new file mode 100755
index 000000000..aab1df687
--- /dev/null
+++ b/testing/tests/ike2/hosts/moon/etc/nat_updown
@@ -0,0 +1,152 @@
+#! /bin/sh
+# NAT updown script
+#
+# Copyright (C) 2010 Andreas Steffen <andreas.steffen@strongswan.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+
+# things that this script gets (from ipsec_pluto(8) man page)
+#
+#      PLUTO_VERSION
+#              indicates  what  version of this interface is being
+#              used.  This document describes version  1.1.   This
+#              is upwardly compatible with version 1.0.
+#
+#       PLUTO_VERB
+#              specifies the name of the operation to be performed
+#              (prepare-host, prepare-client, up-host, up-client,
+#              down-host, or down-client).  If the address family
+#              for security gateway to security gateway communica-
+#              tions is IPv6, then a suffix of -v6 is added to the
+#              verb.
+#
+#       PLUTO_CONNECTION
+#              is the name of the  connection  for  which  we  are
+#              routing.
+#
+#       PLUTO_NEXT_HOP
+#              is the next hop to which packets bound for the peer
+#              must be sent.
+#
+#       PLUTO_INTERFACE
+#              is the name of the ipsec interface to be used.
+#
+#       PLUTO_REQID
+#              is the requid of the ESP policy
+#
+#       PLUTO_ME
+#              is the IP address of our host.
+#
+#       PLUTO_MY_ID
+#              is the ID of our host.
+#
+#       PLUTO_MY_CLIENT
+#              is the IP address / count of our client subnet.  If
+#              the  client  is  just  the  host,  this will be the
+#              host's own IP address / max (where max  is  32  for
+#              IPv4 and 128 for IPv6).
+#
+#       PLUTO_MY_CLIENT_NET
+#              is the IP address of our client net.  If the client
+#              is just the host, this will be the  host's  own  IP
+#              address.
+#
+#       PLUTO_MY_CLIENT_MASK
+#              is  the  mask for our client net.  If the client is
+#              just the host, this will be 255.255.255.255.
+#
+#       PLUTO_MY_SOURCEIP
+#              if non-empty, then the source address for the route will be
+#              set to this IP address.
+#
+#       PLUTO_MY_PROTOCOL
+#              is the IP protocol that will be transported.
+#
+#       PLUTO_MY_PORT
+#              is  the  UDP/TCP  port  to  which  the IPsec SA  is
+#              restricted on our side.
+#
+#       PLUTO_PEER
+#              is the IP address of our peer.
+#
+#       PLUTO_PEER_ID
+#              is the ID of our peer.
+#
+#       PLUTO_PEER_CA
+#              is the CA which issued the cert of our peer.
+#
+#       PLUTO_PEER_CLIENT
+#              is the IP address / count of the peer's client sub-
+#              net.   If the client is just the peer, this will be
+#              the peer's own IP address / max (where  max  is  32
+#              for IPv4 and 128 for IPv6).
+#
+#       PLUTO_PEER_CLIENT_NET
+#              is the IP address of the peer's client net.  If the
+#              client is just the peer, this will  be  the  peer's
+#              own IP address.
+#
+#       PLUTO_PEER_CLIENT_MASK
+#              is  the  mask  for  the  peer's client net.  If the
+#              client   is   just   the   peer,   this   will   be
+#              255.255.255.255.
+#
+#       PLUTO_PEER_PROTOCOL
+#              is the IP protocol that will be transported.
+#
+#       PLUTO_PEER_PORT
+#              is  the  UDP/TCP  port  to  which  the IPsec SA  is
+#              restricted on the peer side.
+#
+
+# define a minimum PATH environment in case it is not set
+PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin"
+export PATH
+
+# resolve octal escape sequences
+PLUTO_MY_ID=`printf "$PLUTO_MY_ID"`
+PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"`
+
+case "$PLUTO_VERB:$1" in
+up-host:)
+	# connection to me coming up
+	# If you are doing a custom version, firewall commands go here.
+	;;
+down-host:)
+	# connection to me going down
+	# If you are doing a custom version, firewall commands go here.
+	;;
+up-client:)
+	# connection to my client subnet coming up
+	# If you are doing a custom version, firewall commands go here.
+	iptables -A FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \
+	    -d $PLUTO_PEER_CLIENT -j ACCEPT
+        iptables -A FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \
+            -s $PLUTO_PEER_CLIENT -j ACCEPT
+	iptables -t nat -A POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \
+	    -d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP
+	echo "inserted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2 
+	;;
+down-client:)
+	# connection to my client subnet going down
+	# If you are doing a custom version, firewall commands go here.
+        iptables -D FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \
+            -d $PLUTO_PEER_CLIENT -j ACCEPT
+        iptables -D FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \
+            -s $PLUTO_PEER_CLIENT -j ACCEPT
+         iptables -t nat -D POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \
+            -d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP
+        echo "deleted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2    
+	;;
+*)	echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
+	exit 1
+	;;
+esac
diff --git a/testing/tests/ike2/hosts/moon/etc/strongswan.conf b/testing/tests/ike2/hosts/moon/etc/strongswan.conf
new file mode 100644
index 000000000..161934454
--- /dev/null
+++ b/testing/tests/ike2/hosts/moon/etc/strongswan.conf
@@ -0,0 +1,6 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink socket-raw updown
+  multiple_authentication = no
+}
diff --git a/testing/tests/ike2/hosts/sun/etc/ipsec.conf b/testing/tests/ike2/hosts/sun/etc/ipsec.conf
new file mode 100755
index 000000000..9cede8d56
--- /dev/null
+++ b/testing/tests/ike2/hosts/sun/etc/ipsec.conf
@@ -0,0 +1,25 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+        crlcheckinterval=180
+	strictcrlpolicy=no
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+        keyingtries=1
+	keyexchange=ikev2
+	mobike=no
+
+conn net-net 
+	left=PH_IP_SUN
+	leftcert=sunCert.pem
+	leftid=@sun.strongswan.org
+	leftsubnet=10.2.0.0/16
+	leftfirewall=yes
+	right=PH_IP_MOON
+	rightid=@moon.strongswan.org
+	rightsourceip=10.4.0.0/24
+	auto=add
diff --git a/testing/tests/ike2/hosts/sun/etc/strongswan.conf b/testing/tests/ike2/hosts/sun/etc/strongswan.conf
new file mode 100644
index 000000000..161934454
--- /dev/null
+++ b/testing/tests/ike2/hosts/sun/etc/strongswan.conf
@@ -0,0 +1,6 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink socket-raw updown
+  multiple_authentication = no
+}