New upstream version 5.6.1

11 files changed, 1336 insertions, 0 deletions

diff --git a/testing/tests/libipsec/net2net-cert-ipv6/description.txt b/testing/tests/libipsec/net2net-cert-ipv6/description.txt
new file mode 100644
index 000000000..ab582c3a5
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ipv6/description.txt
@@ -0,0 +1,14 @@
+A connection between the subnets behind the gateways <b>moon</b> and <b>sun</b> is set up.
+The authentication is based on <b>X.509 certificates</b> and the <b>kernel-libipsec</b>
+plugin is used for userland IPsec ESP encryption.
+<p/>
+Upon the successful establishment of the IPsec tunnel, an updown script automatically
+inserts iptables-based firewall rules that let pass the traffic tunneled via the
+<b>ipsec0</b> tun interface. In order to test both tunnel and firewall, client <b>alice</b>
+behind gateway <b>moon</b> pings client <b>bob</b> located behind gateway <b>sun</b>.
+<p/>
+This scenario is mainly to test how fragmented IPv6 packets are handled (e.g. determining
+the protocol via IPv6 extension headers). Three pings are required due to PMTUD, the first
+is rejected by <b>moon</b>, so <b>alice</b> adjusts the MTU. The second gets through,
+but the response is rejected by <b>sun</b>, so <b>bob</b> will adjust the MTU. The third
+finally is successful.
diff --git a/testing/tests/libipsec/net2net-cert-ipv6/evaltest.dat b/testing/tests/libipsec/net2net-cert-ipv6/evaltest.dat
new file mode 100644
index 000000000..e9a30b9ac
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ipv6/evaltest.dat
@@ -0,0 +1,5 @@
+alice::ping6 -c 3 -W 1 -i 0.2 -s 8184 -p deadbeef ip6-bob.strongswan.org::8192 bytes from ip6-bob.strongswan.org: icmp_seq=3::YES
+moon ::swanctl --list-sas --raw 2> /dev/null::gw-gw.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=4500 local-id=moon.strongswan.org remote-host=192.168.0.2 remote-port=4500 remote-id=sun.strongswan.org initiator=yes.*nat-remote=yes nat-any=yes encr-alg=AES_CBC encr-keysize=256 integ-alg=HMAC_SHA2_384_192 prf-alg=PRF_HMAC_SHA2_384 dh-group=ECP_384.*child-sas.*net-net.*reqid=1 state=INSTALLED mode=TUNNEL protocol=ESP encap=yes.*encr-alg=AES_GCM_16 encr-keysize=256.*local-ts=\[fec1::/16\[ipv6-icmp]] remote-ts=\[fec2::/16\[ipv6-icmp]]::YES
+sun  ::swanctl --list-sas --raw 2> /dev/null::gw-gw.*version=2 state=ESTABLISHED local-host=192.168.0.2 local-port=4500 local-id=sun.strongswan.org remote-host=192.168.0.1 remote-port=4500 remote-id=moon.strongswan.org.*nat-remote=yes nat-any=yes encr-alg=AES_CBC encr-keysize=256 integ-alg=HMAC_SHA2_384_192 prf-alg=PRF_HMAC_SHA2_384 dh-group=ECP_384.*child-sas.*net-net.*reqid=1 state=INSTALLED mode=TUNNEL protocol=ESP encap=yes.*encr-alg=AES_GCM_16 encr-keysize=256.*local-ts=\[fec2::/16\[ipv6-icmp]] remote-ts=\[fec1::/16\[ipv6-icmp]]::YES
+sun::tcpdump::IP moon.strongswan.org.\(4500\|ipsec-nat-t\) > sun.strongswan.org.\(4500\|ipsec-nat-t\): UDP-encap: ESP::YES
+sun::tcpdump::IP sun.strongswan.org.\(4500\|ipsec-nat-t\) > moon.strongswan.org.\(4500\|ipsec-nat-t\): UDP-encap: ESP::YES
diff --git a/testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/strongswan.conf b/testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/strongswan.conf
new file mode 100644
index 000000000..6870d32fe
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/strongswan.conf
@@ -0,0 +1,10 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+swanctl {
+  load = pem pkcs1 x509 revocation constraints pubkey openssl random
+}
+
+charon-systemd {
+  load = random nonce pem pkcs1 x509 openssl curl revocation vici kernel-libipsec kernel-netlink socket-default updown
+  multiple_authentication = no
+}
diff --git a/testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/swanctl/swanctl.conf b/testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/swanctl/swanctl.conf
new file mode 100755
index 000000000..586cc57c1
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/swanctl/swanctl.conf
@@ -0,0 +1,29 @@
+connections {
+
+   gw-gw {
+      local_addrs  = 192.168.0.1
+      remote_addrs = 192.168.0.2 
+
+      local {
+         auth = pubkey
+         certs = moonCert.pem
+         id = moon.strongswan.org
+      }
+      remote {
+         auth = pubkey
+         id = sun.strongswan.org 
+      }
+      children {
+         net-net {
+            local_ts  = fec1::0/16[ipv6-icmp] 
+            remote_ts = fec2::0/16[ipv6-icmp] 
+
+            updown = /etc/updown
+            esp_proposals = aes256gcm128-ecp384
+         }
+      }
+      version = 2
+      mobike = no
+      proposals = aes256-sha384-ecp384
+   }
+}
diff --git a/testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/updown b/testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/updown
new file mode 100755
index 000000000..e7c3640d4
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ipv6/hosts/moon/etc/updown
@@ -0,0 +1,597 @@
+#!/bin/sh
+# default updown script
+#
+# Copyright (C) 2003-2004 Nigel Meteringham
+# Copyright (C) 2003-2004 Tuomo Soini
+# Copyright (C) 2002-2004 Michael Richardson
+# Copyright (C) 2005-2007 Andreas Steffen <andreas.steffen@strongswan.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+
+# CAUTION:  Installing a new version of strongSwan will install a new
+# copy of this script, wiping out any custom changes you make.  If
+# you need changes, make a copy of this under another name, and customize
+# that, and use the (left/right)updown parameters in ipsec.conf to make
+# strongSwan use yours instead of this default one.
+
+#      PLUTO_VERSION
+#              indicates  what  version of this interface is being
+#              used.  This document describes version  1.1.   This
+#              is upwardly compatible with version 1.0.
+#
+#       PLUTO_VERB
+#              specifies the name of the operation to be performed
+#              (prepare-host, prepare-client, up-host, up-client,
+#              down-host, or down-client).  If the address family
+#              for security gateway to security gateway communica-
+#              tions is IPv6, then a suffix of -v6 is added to the
+#              verb.
+#
+#       PLUTO_CONNECTION
+#              is the name of the  connection  for  which  we  are
+#              routing.
+#
+#       PLUTO_INTERFACE
+#              is the name of the ipsec interface to be used.
+#
+#       PLUTO_REQID
+#              is the requid of the AH|ESP policy
+#
+#       PLUTO_PROTO
+#              is the negotiated IPsec protocol, ah|esp
+#
+#       PLUTO_IPCOMP
+#              is not empty if IPComp was negotiated
+#
+#       PLUTO_UNIQUEID
+#              is the unique identifier of the associated IKE_SA
+#
+#       PLUTO_ME
+#              is the IP address of our host.
+#
+#       PLUTO_MY_ID
+#              is the ID of our host.
+#
+#       PLUTO_MY_CLIENT
+#              is the IP address / count of our client subnet.  If
+#              the  client  is  just  the  host,  this will be the
+#              host's own IP address / max (where max  is  32  for
+#              IPv4 and 128 for IPv6).
+#
+#       PLUTO_MY_SOURCEIP
+#       PLUTO_MY_SOURCEIP4_$i
+#       PLUTO_MY_SOURCEIP6_$i
+#              contains IPv4/IPv6 virtual IP received from a responder,
+#              $i enumerates from 1 to the number of IP per address family.
+#              PLUTO_MY_SOURCEIP is a legacy variable and equal to the first
+#              virtual IP, IPv4 or IPv6.
+#
+#       PLUTO_MY_PROTOCOL
+#              is the IP protocol that will be transported.
+#
+#       PLUTO_MY_PORT
+#              is  the  UDP/TCP  port  to  which  the IPsec SA  is
+#              restricted on our side.  For ICMP/ICMPv6 this contains the
+#              message type, and PLUTO_PEER_PORT the message code.
+#
+#       PLUTO_PEER
+#              is the IP address of our peer.
+#
+#       PLUTO_PEER_ID
+#              is the ID of our peer.
+#
+#       PLUTO_PEER_CLIENT
+#              is the IP address / count of the peer's client sub-
+#              net.   If the client is just the peer, this will be
+#              the peer's own IP address / max (where  max  is  32
+#              for IPv4 and 128 for IPv6).
+#
+#       PLUTO_PEER_SOURCEIP
+#       PLUTO_PEER_SOURCEIP4_$i
+#       PLUTO_PEER_SOURCEIP6_$i
+#              contains IPv4/IPv6 virtual IP sent to an initiator,
+#              $i enumerates from 1 to the number of IP per address family.
+#              PLUTO_PEER_SOURCEIP is a legacy variable and equal to the first
+#              virtual IP, IPv4 or IPv6.
+#
+#       PLUTO_PEER_PROTOCOL
+#              is the IP protocol that will be transported.
+#
+#       PLUTO_PEER_PORT
+#              is  the  UDP/TCP  port  to  which  the IPsec SA  is
+#              restricted on the peer side.  For ICMP/ICMPv6 this contains the
+#              message code, and PLUTO_MY_PORT the message type.
+#
+#       PLUTO_XAUTH_ID
+#              is an optional user ID employed by the XAUTH protocol
+#
+#       PLUTO_MARK_IN
+#              is an optional XFRM mark set on the inbound IPsec SA
+#
+#       PLUTO_MARK_OUT
+#              is an optional XFRM mark set on the outbound IPsec SA
+#
+#       PLUTO_UDP_ENC
+#              contains the remote UDP port in the case of ESP_IN_UDP
+#              encapsulation
+#
+#       PLUTO_DNS4_$i
+#       PLUTO_DNS6_$i
+#              contains IPv4/IPv6 DNS server attribute received from a
+#              responder, $i enumerates from 1 to the number of servers per
+#              address family.
+#
+
+# define a minimum PATH environment in case it is not set
+PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/sbin"
+export PATH
+
+# comment to disable logging VPN connections to syslog
+VPN_LOGGING=1
+#
+# tag put in front of each log entry:
+TAG=vpn
+#
+# syslog facility and priority used:
+FAC_PRIO=local0.notice
+#
+# to create a special vpn logging file, put the following line into
+# the syslog configuration file /etc/syslog.conf:
+#
+# local0.notice                   -/var/log/vpn
+
+# check interface version
+case "$PLUTO_VERSION" in
+1.[0|1])	# Older release?!?  Play it safe, script may be using new features.
+	echo "$0: obsolete interface version \`$PLUTO_VERSION'," >&2
+	echo "$0: 	called by obsolete release?" >&2
+	exit 2
+	;;
+1.*)	;;
+*)	echo "$0: unknown interface version \`$PLUTO_VERSION'" >&2
+	exit 2
+	;;
+esac
+
+# check parameter(s)
+case "$1:$*" in
+':')			# no parameters
+	;;
+iptables:iptables)	# due to (left/right)firewall; for default script only
+	;;
+custom:*)		# custom parameters (see above CAUTION comment)
+	;;
+*)	echo "$0: unknown parameters \`$*'" >&2
+	exit 2
+	;;
+esac
+
+IPSEC_POLICY="-m policy --pol ipsec --proto $PLUTO_PROTO --reqid $PLUTO_REQID"
+IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
+IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
+
+# use protocol specific options to set ports
+case "$PLUTO_MY_PROTOCOL" in
+1)	# ICMP
+	ICMP_TYPE_OPTION="--icmp-type"
+	;;
+58)	# ICMPv6
+	ICMP_TYPE_OPTION="--icmpv6-type"
+	;;
+*)
+	;;
+esac
+
+# are there port numbers?
+if [ "$PLUTO_MY_PORT" != 0 ]
+then
+	if [ -n "$ICMP_TYPE_OPTION" ]
+	then
+		S_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+		D_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+	else
+		S_MY_PORT="--sport $PLUTO_MY_PORT"
+		D_MY_PORT="--dport $PLUTO_MY_PORT"
+	fi
+fi
+if [ "$PLUTO_PEER_PORT" != 0 ]
+then
+	if [ -n "$ICMP_TYPE_OPTION" ]
+	then
+		# the syntax is --icmp[v6]-type type[/code], so add it to the existing option
+		S_MY_PORT="$S_MY_PORT/$PLUTO_PEER_PORT"
+		D_MY_PORT="$D_MY_PORT/$PLUTO_PEER_PORT"
+	else
+		S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+		D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+	fi
+fi
+
+# resolve octal escape sequences
+PLUTO_MY_ID=`printf "$PLUTO_MY_ID"`
+PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"`
+
+case "$PLUTO_VERB:$1" in
+up-host:)
+	# connection to me coming up
+	# If you are doing a custom version, firewall commands go here.
+	;;
+down-host:)
+	# connection to me going down
+	# If you are doing a custom version, firewall commands go here.
+	;;
+up-client:)
+	# connection to my client subnet coming up
+	# If you are doing a custom version, firewall commands go here.
+	PLUTO_INTERFACE=ipsec0
+	iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+	iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	    -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+	;;
+down-client:)
+	# connection to my client subnet going down
+	# If you are doing a custom version, firewall commands go here.
+	PLUTO_INTERFACE=ipsec0
+	iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+	iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	    -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+	;;
+up-host:iptables)
+	# connection to me, with (left/right)firewall=yes, coming up
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+	#
+	# allow IPIP traffic because of the implicit SA created by the kernel if
+	# IPComp is used (for small inbound packets that are not compressed)
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  iptables -I INPUT 1 -i $PLUTO_INTERFACE -p 4 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec host connection setup
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+	  else
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+	  fi
+	fi
+	;;
+down-host:iptables)
+	# connection to me, with (left/right)firewall=yes, going down
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+	#
+	# IPIP exception teardown
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  iptables -D INPUT -i $PLUTO_INTERFACE -p 4 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec host connection teardown
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+	  else
+	    logger -t $TAG -p $FAC_PRIO -- \
+	    "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+	  fi
+	fi
+	;;
+up-client:iptables)
+	# connection to client subnet, with (left/right)firewall=yes, coming up
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
+	then
+	  iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+	  iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# a virtual IP requires an INPUT and OUTPUT rule on the host
+	# or sometimes host access via the internal IP is needed
+	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+	then
+	  iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	  iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+	fi
+	#
+	# allow IPIP traffic because of the implicit SA created by the kernel if
+	# IPComp is used (for small inbound packets that are not compressed).
+	# INPUT is correct here even for forwarded traffic.
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  iptables -I INPUT 1 -i $PLUTO_INTERFACE -p 4 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec client connection setup
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  else
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  fi
+	fi
+	;;
+down-client:iptables)
+	# connection to client subnet, with (left/right)firewall=yes, going down
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
+	then
+	  iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+	         $IPSEC_POLICY_OUT -j ACCEPT
+	  iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT \
+	         $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# a virtual IP requires an INPUT and OUTPUT rule on the host
+	# or sometimes host access via the internal IP is needed
+	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+	then
+	  iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT \
+	         $IPSEC_POLICY_IN -j ACCEPT
+	  iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+	         $IPSEC_POLICY_OUT -j ACCEPT
+	fi
+	#
+	# IPIP exception teardown
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  iptables -D INPUT -i $PLUTO_INTERFACE -p 4 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec client connection teardown
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  else
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  fi
+	fi
+	;;
+#
+# IPv6
+#
+up-host-v6:)
+	# connection to me coming up
+	# If you are doing a custom version, firewall commands go here.
+	;;
+down-host-v6:)
+	# connection to me going down
+	# If you are doing a custom version, firewall commands go here.
+	;;
+up-client-v6:)
+	# connection to my client subnet coming up
+	# If you are doing a custom version, firewall commands go here.
+	;;
+down-client-v6:)
+	# connection to my client subnet going down
+	# If you are doing a custom version, firewall commands go here.
+	;;
+up-host-v6:iptables)
+	# connection to me, with (left/right)firewall=yes, coming up
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	ip6tables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	ip6tables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+	#
+	# allow IP6IP6 traffic because of the implicit SA created by the kernel if
+	# IPComp is used (for small inbound packets that are not compressed)
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  ip6tables -I INPUT 1 -i $PLUTO_INTERFACE -p 41 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec host connection setup
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+	  else
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+	  fi
+	fi
+	;;
+down-host-v6:iptables)
+	# connection to me, with (left/right)firewall=yes, going down
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	ip6tables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	ip6tables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+	#
+	# IP6IP6 exception teardown
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  ip6tables -D INPUT -i $PLUTO_INTERFACE -p 41 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec host connection teardown
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+	  else
+	    logger -t $TAG -p $FAC_PRIO -- \
+	    "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+	  fi
+	fi
+	;;
+up-client-v6:iptables)
+	# connection to client subnet, with (left/right)firewall=yes, coming up
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/128" ]
+	then
+	  ip6tables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+	  ip6tables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# a virtual IP requires an INPUT and OUTPUT rule on the host
+	# or sometimes host access via the internal IP is needed
+	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+	then
+	  ip6tables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	  ip6tables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+	fi
+	#
+	# allow IP6IP6 traffic because of the implicit SA created by the kernel if
+	# IPComp is used (for small inbound packets that are not compressed).
+	# INPUT is correct here even for forwarded traffic.
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  ip6tables -I INPUT 1 -i $PLUTO_INTERFACE -p 41 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec client connection setup
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  else
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  fi
+	fi
+	;;
+down-client-v6:iptables)
+	# connection to client subnet, with (left/right)firewall=yes, going down
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/128" ]
+	then
+	  ip6tables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+	         $IPSEC_POLICY_OUT -j ACCEPT
+	  ip6tables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT \
+	         $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# a virtual IP requires an INPUT and OUTPUT rule on the host
+	# or sometimes host access via the internal IP is needed
+	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+	then
+	  ip6tables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT \
+	         $IPSEC_POLICY_IN -j ACCEPT
+	  ip6tables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+	         $IPSEC_POLICY_OUT -j ACCEPT
+	fi
+	#
+	# IP6IP6 exception teardown
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  ip6tables -D INPUT -i $PLUTO_INTERFACE -p 41 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec client connection teardown
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  else
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  fi
+	fi
+	;;
+*)	echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
+	exit 1
+	;;
+esac
diff --git a/testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/strongswan.conf b/testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/strongswan.conf
new file mode 100644
index 000000000..6870d32fe
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/strongswan.conf
@@ -0,0 +1,10 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+swanctl {
+  load = pem pkcs1 x509 revocation constraints pubkey openssl random
+}
+
+charon-systemd {
+  load = random nonce pem pkcs1 x509 openssl curl revocation vici kernel-libipsec kernel-netlink socket-default updown
+  multiple_authentication = no
+}
diff --git a/testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/swanctl/swanctl.conf b/testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/swanctl/swanctl.conf
new file mode 100755
index 000000000..74977608d
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/swanctl/swanctl.conf
@@ -0,0 +1,29 @@
+connections {
+
+   gw-gw {
+      local_addrs  = 192.168.0.2
+      remote_addrs = 192.168.0.1 
+
+      local {
+         auth = pubkey
+         certs = sunCert.pem
+         id = sun.strongswan.org
+      }
+      remote {
+         auth = pubkey
+         id = moon.strongswan.org 
+      }
+      children {
+         net-net {
+            local_ts  = fec2::0/16[ipv6-icmp]
+            remote_ts = fec1::0/16[ipv6-icmp] 
+
+            updown = /etc/updown
+            esp_proposals = aes256gcm128-ecp384
+         }
+      }
+      version = 2
+      mobike = no
+      proposals = aes256-sha384-ecp384
+   }
+}
diff --git a/testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/updown b/testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/updown
new file mode 100755
index 000000000..e7c3640d4
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ipv6/hosts/sun/etc/updown
@@ -0,0 +1,597 @@
+#!/bin/sh
+# default updown script
+#
+# Copyright (C) 2003-2004 Nigel Meteringham
+# Copyright (C) 2003-2004 Tuomo Soini
+# Copyright (C) 2002-2004 Michael Richardson
+# Copyright (C) 2005-2007 Andreas Steffen <andreas.steffen@strongswan.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+
+# CAUTION:  Installing a new version of strongSwan will install a new
+# copy of this script, wiping out any custom changes you make.  If
+# you need changes, make a copy of this under another name, and customize
+# that, and use the (left/right)updown parameters in ipsec.conf to make
+# strongSwan use yours instead of this default one.
+
+#      PLUTO_VERSION
+#              indicates  what  version of this interface is being
+#              used.  This document describes version  1.1.   This
+#              is upwardly compatible with version 1.0.
+#
+#       PLUTO_VERB
+#              specifies the name of the operation to be performed
+#              (prepare-host, prepare-client, up-host, up-client,
+#              down-host, or down-client).  If the address family
+#              for security gateway to security gateway communica-
+#              tions is IPv6, then a suffix of -v6 is added to the
+#              verb.
+#
+#       PLUTO_CONNECTION
+#              is the name of the  connection  for  which  we  are
+#              routing.
+#
+#       PLUTO_INTERFACE
+#              is the name of the ipsec interface to be used.
+#
+#       PLUTO_REQID
+#              is the requid of the AH|ESP policy
+#
+#       PLUTO_PROTO
+#              is the negotiated IPsec protocol, ah|esp
+#
+#       PLUTO_IPCOMP
+#              is not empty if IPComp was negotiated
+#
+#       PLUTO_UNIQUEID
+#              is the unique identifier of the associated IKE_SA
+#
+#       PLUTO_ME
+#              is the IP address of our host.
+#
+#       PLUTO_MY_ID
+#              is the ID of our host.
+#
+#       PLUTO_MY_CLIENT
+#              is the IP address / count of our client subnet.  If
+#              the  client  is  just  the  host,  this will be the
+#              host's own IP address / max (where max  is  32  for
+#              IPv4 and 128 for IPv6).
+#
+#       PLUTO_MY_SOURCEIP
+#       PLUTO_MY_SOURCEIP4_$i
+#       PLUTO_MY_SOURCEIP6_$i
+#              contains IPv4/IPv6 virtual IP received from a responder,
+#              $i enumerates from 1 to the number of IP per address family.
+#              PLUTO_MY_SOURCEIP is a legacy variable and equal to the first
+#              virtual IP, IPv4 or IPv6.
+#
+#       PLUTO_MY_PROTOCOL
+#              is the IP protocol that will be transported.
+#
+#       PLUTO_MY_PORT
+#              is  the  UDP/TCP  port  to  which  the IPsec SA  is
+#              restricted on our side.  For ICMP/ICMPv6 this contains the
+#              message type, and PLUTO_PEER_PORT the message code.
+#
+#       PLUTO_PEER
+#              is the IP address of our peer.
+#
+#       PLUTO_PEER_ID
+#              is the ID of our peer.
+#
+#       PLUTO_PEER_CLIENT
+#              is the IP address / count of the peer's client sub-
+#              net.   If the client is just the peer, this will be
+#              the peer's own IP address / max (where  max  is  32
+#              for IPv4 and 128 for IPv6).
+#
+#       PLUTO_PEER_SOURCEIP
+#       PLUTO_PEER_SOURCEIP4_$i
+#       PLUTO_PEER_SOURCEIP6_$i
+#              contains IPv4/IPv6 virtual IP sent to an initiator,
+#              $i enumerates from 1 to the number of IP per address family.
+#              PLUTO_PEER_SOURCEIP is a legacy variable and equal to the first
+#              virtual IP, IPv4 or IPv6.
+#
+#       PLUTO_PEER_PROTOCOL
+#              is the IP protocol that will be transported.
+#
+#       PLUTO_PEER_PORT
+#              is  the  UDP/TCP  port  to  which  the IPsec SA  is
+#              restricted on the peer side.  For ICMP/ICMPv6 this contains the
+#              message code, and PLUTO_MY_PORT the message type.
+#
+#       PLUTO_XAUTH_ID
+#              is an optional user ID employed by the XAUTH protocol
+#
+#       PLUTO_MARK_IN
+#              is an optional XFRM mark set on the inbound IPsec SA
+#
+#       PLUTO_MARK_OUT
+#              is an optional XFRM mark set on the outbound IPsec SA
+#
+#       PLUTO_UDP_ENC
+#              contains the remote UDP port in the case of ESP_IN_UDP
+#              encapsulation
+#
+#       PLUTO_DNS4_$i
+#       PLUTO_DNS6_$i
+#              contains IPv4/IPv6 DNS server attribute received from a
+#              responder, $i enumerates from 1 to the number of servers per
+#              address family.
+#
+
+# define a minimum PATH environment in case it is not set
+PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/sbin"
+export PATH
+
+# comment to disable logging VPN connections to syslog
+VPN_LOGGING=1
+#
+# tag put in front of each log entry:
+TAG=vpn
+#
+# syslog facility and priority used:
+FAC_PRIO=local0.notice
+#
+# to create a special vpn logging file, put the following line into
+# the syslog configuration file /etc/syslog.conf:
+#
+# local0.notice                   -/var/log/vpn
+
+# check interface version
+case "$PLUTO_VERSION" in
+1.[0|1])	# Older release?!?  Play it safe, script may be using new features.
+	echo "$0: obsolete interface version \`$PLUTO_VERSION'," >&2
+	echo "$0: 	called by obsolete release?" >&2
+	exit 2
+	;;
+1.*)	;;
+*)	echo "$0: unknown interface version \`$PLUTO_VERSION'" >&2
+	exit 2
+	;;
+esac
+
+# check parameter(s)
+case "$1:$*" in
+':')			# no parameters
+	;;
+iptables:iptables)	# due to (left/right)firewall; for default script only
+	;;
+custom:*)		# custom parameters (see above CAUTION comment)
+	;;
+*)	echo "$0: unknown parameters \`$*'" >&2
+	exit 2
+	;;
+esac
+
+IPSEC_POLICY="-m policy --pol ipsec --proto $PLUTO_PROTO --reqid $PLUTO_REQID"
+IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
+IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
+
+# use protocol specific options to set ports
+case "$PLUTO_MY_PROTOCOL" in
+1)	# ICMP
+	ICMP_TYPE_OPTION="--icmp-type"
+	;;
+58)	# ICMPv6
+	ICMP_TYPE_OPTION="--icmpv6-type"
+	;;
+*)
+	;;
+esac
+
+# are there port numbers?
+if [ "$PLUTO_MY_PORT" != 0 ]
+then
+	if [ -n "$ICMP_TYPE_OPTION" ]
+	then
+		S_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+		D_MY_PORT="$ICMP_TYPE_OPTION $PLUTO_MY_PORT"
+	else
+		S_MY_PORT="--sport $PLUTO_MY_PORT"
+		D_MY_PORT="--dport $PLUTO_MY_PORT"
+	fi
+fi
+if [ "$PLUTO_PEER_PORT" != 0 ]
+then
+	if [ -n "$ICMP_TYPE_OPTION" ]
+	then
+		# the syntax is --icmp[v6]-type type[/code], so add it to the existing option
+		S_MY_PORT="$S_MY_PORT/$PLUTO_PEER_PORT"
+		D_MY_PORT="$D_MY_PORT/$PLUTO_PEER_PORT"
+	else
+		S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+		D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+	fi
+fi
+
+# resolve octal escape sequences
+PLUTO_MY_ID=`printf "$PLUTO_MY_ID"`
+PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"`
+
+case "$PLUTO_VERB:$1" in
+up-host:)
+	# connection to me coming up
+	# If you are doing a custom version, firewall commands go here.
+	;;
+down-host:)
+	# connection to me going down
+	# If you are doing a custom version, firewall commands go here.
+	;;
+up-client:)
+	# connection to my client subnet coming up
+	# If you are doing a custom version, firewall commands go here.
+	PLUTO_INTERFACE=ipsec0
+	iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+	iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	    -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+	;;
+down-client:)
+	# connection to my client subnet going down
+	# If you are doing a custom version, firewall commands go here.
+	PLUTO_INTERFACE=ipsec0
+	iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+	iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	    -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+	;;
+up-host:iptables)
+	# connection to me, with (left/right)firewall=yes, coming up
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+	#
+	# allow IPIP traffic because of the implicit SA created by the kernel if
+	# IPComp is used (for small inbound packets that are not compressed)
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  iptables -I INPUT 1 -i $PLUTO_INTERFACE -p 4 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec host connection setup
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+	  else
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+	  fi
+	fi
+	;;
+down-host:iptables)
+	# connection to me, with (left/right)firewall=yes, going down
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+	#
+	# IPIP exception teardown
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  iptables -D INPUT -i $PLUTO_INTERFACE -p 4 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec host connection teardown
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+	  else
+	    logger -t $TAG -p $FAC_PRIO -- \
+	    "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+	  fi
+	fi
+	;;
+up-client:iptables)
+	# connection to client subnet, with (left/right)firewall=yes, coming up
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
+	then
+	  iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+	  iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# a virtual IP requires an INPUT and OUTPUT rule on the host
+	# or sometimes host access via the internal IP is needed
+	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+	then
+	  iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	  iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+	fi
+	#
+	# allow IPIP traffic because of the implicit SA created by the kernel if
+	# IPComp is used (for small inbound packets that are not compressed).
+	# INPUT is correct here even for forwarded traffic.
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  iptables -I INPUT 1 -i $PLUTO_INTERFACE -p 4 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec client connection setup
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  else
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  fi
+	fi
+	;;
+down-client:iptables)
+	# connection to client subnet, with (left/right)firewall=yes, going down
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
+	then
+	  iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+	         $IPSEC_POLICY_OUT -j ACCEPT
+	  iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT \
+	         $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# a virtual IP requires an INPUT and OUTPUT rule on the host
+	# or sometimes host access via the internal IP is needed
+	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+	then
+	  iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT \
+	         $IPSEC_POLICY_IN -j ACCEPT
+	  iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+	         $IPSEC_POLICY_OUT -j ACCEPT
+	fi
+	#
+	# IPIP exception teardown
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  iptables -D INPUT -i $PLUTO_INTERFACE -p 4 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec client connection teardown
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  else
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  fi
+	fi
+	;;
+#
+# IPv6
+#
+up-host-v6:)
+	# connection to me coming up
+	# If you are doing a custom version, firewall commands go here.
+	;;
+down-host-v6:)
+	# connection to me going down
+	# If you are doing a custom version, firewall commands go here.
+	;;
+up-client-v6:)
+	# connection to my client subnet coming up
+	# If you are doing a custom version, firewall commands go here.
+	;;
+down-client-v6:)
+	# connection to my client subnet going down
+	# If you are doing a custom version, firewall commands go here.
+	;;
+up-host-v6:iptables)
+	# connection to me, with (left/right)firewall=yes, coming up
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	ip6tables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	ip6tables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+	#
+	# allow IP6IP6 traffic because of the implicit SA created by the kernel if
+	# IPComp is used (for small inbound packets that are not compressed)
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  ip6tables -I INPUT 1 -i $PLUTO_INTERFACE -p 41 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec host connection setup
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+	  else
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+	  fi
+	fi
+	;;
+down-host-v6:iptables)
+	# connection to me, with (left/right)firewall=yes, going down
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	ip6tables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	ip6tables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+	#
+	# IP6IP6 exception teardown
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  ip6tables -D INPUT -i $PLUTO_INTERFACE -p 41 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec host connection teardown
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+	  else
+	    logger -t $TAG -p $FAC_PRIO -- \
+	    "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+	  fi
+	fi
+	;;
+up-client-v6:iptables)
+	# connection to client subnet, with (left/right)firewall=yes, coming up
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/128" ]
+	then
+	  ip6tables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+	  ip6tables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# a virtual IP requires an INPUT and OUTPUT rule on the host
+	# or sometimes host access via the internal IP is needed
+	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+	then
+	  ip6tables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	  ip6tables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+	fi
+	#
+	# allow IP6IP6 traffic because of the implicit SA created by the kernel if
+	# IPComp is used (for small inbound packets that are not compressed).
+	# INPUT is correct here even for forwarded traffic.
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  ip6tables -I INPUT 1 -i $PLUTO_INTERFACE -p 41 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec client connection setup
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  else
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  fi
+	fi
+	;;
+down-client-v6:iptables)
+	# connection to client subnet, with (left/right)firewall=yes, going down
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/128" ]
+	then
+	  ip6tables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+	         $IPSEC_POLICY_OUT -j ACCEPT
+	  ip6tables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT \
+	         $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# a virtual IP requires an INPUT and OUTPUT rule on the host
+	# or sometimes host access via the internal IP is needed
+	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+	then
+	  ip6tables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT $D_MY_PORT \
+	         $IPSEC_POLICY_IN -j ACCEPT
+	  ip6tables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+	         $IPSEC_POLICY_OUT -j ACCEPT
+	fi
+	#
+	# IP6IP6 exception teardown
+	if [ -n "$PLUTO_IPCOMP" ]
+	then
+	  ip6tables -D INPUT -i $PLUTO_INTERFACE -p 41 \
+	      -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# log IPsec client connection teardown
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  else
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  fi
+	fi
+	;;
+*)	echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
+	exit 1
+	;;
+esac
diff --git a/testing/tests/libipsec/net2net-cert-ipv6/posttest.dat b/testing/tests/libipsec/net2net-cert-ipv6/posttest.dat
new file mode 100644
index 000000000..8cbf20027
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ipv6/posttest.dat
@@ -0,0 +1,9 @@
+moon::swanctl --terminate --ike gw-gw 2> /dev/null
+moon::systemctl stop strongswan-swanctl
+sun::systemctl stop strongswan-swanctl
+alice::"ip route del fec2:\:/16 via fec1:\:1"
+moon::"ip route del fec2:\:/16 via fec0:\:2"
+sun::"ip route del fec1:\:/16 via fec0:\:1"
+bob::"ip route del fec1:\:/16 via fec2:\:1"
+moon::iptables-restore < /etc/iptables.flush
+sun::iptables-restore < /etc/iptables.flush
diff --git a/testing/tests/libipsec/net2net-cert-ipv6/pretest.dat b/testing/tests/libipsec/net2net-cert-ipv6/pretest.dat
new file mode 100644
index 000000000..20aca8291
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ipv6/pretest.dat
@@ -0,0 +1,11 @@
+moon::iptables-restore < /etc/iptables.rules
+sun::iptables-restore < /etc/iptables.rules
+alice::"ip route add fec2:\:/16 via fec1:\:1"
+moon::"ip route add fec2:\:/16 via fec0:\:2"
+sun::"ip route add fec1:\:/16 via fec0:\:1"
+bob::"ip route add fec1:\:/16 via fec2:\:1"
+moon::systemctl start strongswan-swanctl
+sun::systemctl start strongswan-swanctl
+moon::expect-connection gw-gw
+sun::expect-connection gw-gw
+moon::swanctl --initiate --child net-net 2> /dev/null
diff --git a/testing/tests/libipsec/net2net-cert-ipv6/test.conf b/testing/tests/libipsec/net2net-cert-ipv6/test.conf
new file mode 100644
index 000000000..07a3b247a
--- /dev/null
+++ b/testing/tests/libipsec/net2net-cert-ipv6/test.conf
@@ -0,0 +1,25 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# guest instances used for this test
+
+# All guest instances that are required for this test
+#
+VIRTHOSTS="alice moon winnetou sun bob"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-m-w-s-b.png"
+ 
+# Guest instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="sun"
+
+# Guest instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon sun"
+
+# charon controlled by swanctl
+#
+SWANCTL=1