Imported Upstream version 5.1.1

29 files changed, 1489 insertions, 0 deletions

diff --git a/testing/tests/tnc/tnccs-11-supplicant/description.txt b/testing/tests/tnc/tnccs-11-supplicant/description.txt
new file mode 100644
index 000000000..6505750b2
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/description.txt
@@ -0,0 +1,12 @@
+The layer 2 supplicants <b>carol</b> and <b>dave</b> want to connect to a network
+via switch <b>moon</b> which delegates the IEEE 802.1X authentication to the RADIUS
+server <b>alice</b>. <b>carol</b> and <b>dave</b> set up an <b>EAP-TTLS</b> tunnel
+each via <b>moon</b> to the <a href="http://trust.inform.fh-hannover.de/joomla/index.php/projects/tncfhh" target="popup"> <b>TNC@FHH</b></a>-enhanced FreeRADIUS server <b>alice</b> authenticated
+by an X.509 AAA certificate.
+The strong EAP-TTLS tunnel protects the ensuing weak client authentication based on <b>EAP-MD5</b>.
+In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the
+health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface.
+The communication between IMCs and IMVs is based on the  <b>IF-M</b> protocol defined by <b>RFC 5792 PA-TNC</b>.
+<p>
+<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements the clients
+are connected by switch <b>moon</b> to the "allow" and "isolate" VLANs, respectively.
diff --git a/testing/tests/tnc/tnccs-11-supplicant/evaltest.dat b/testing/tests/tnc/tnccs-11-supplicant/evaltest.dat
new file mode 100644
index 000000000..2d43b3c7b
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/evaltest.dat
@@ -0,0 +1,2 @@
+carol::cat /var/log/daemon.log::IMC.*changed state.*Allowed::YES
+dave:: cat /var/log/daemon.log::IMC.*changed state.*Isolate::YES
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/eap.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/eap.conf
new file mode 100644
index 000000000..31556361e
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/eap.conf
@@ -0,0 +1,25 @@
+eap {
+  md5 {
+  }
+  default_eap_type = ttls
+  tls {
+    private_key_file = /etc/raddb/certs/aaaKey.pem
+    certificate_file = /etc/raddb/certs/aaaCert.pem
+    CA_file = /etc/raddb/certs/strongswanCert.pem
+    cipher_list = "DEFAULT"
+    dh_file = /etc/raddb/certs/dh
+    random_file = /etc/raddb/certs/random
+  }
+  ttls {
+    default_eap_type = md5
+    use_tunneled_reply = yes
+    virtual_server = "inner-tunnel"
+    tnc_virtual_server = "inner-tunnel-second"
+  }
+}
+
+eap eap_tnc {
+      default_eap_type = tnc
+      tnc {
+      }
+}
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/proxy.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/proxy.conf
new file mode 100644
index 000000000..23cba8d11
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/proxy.conf
@@ -0,0 +1,5 @@
+realm strongswan.org {
+  type     = radius
+  authhost = LOCAL
+  accthost = LOCAL
+}
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/default b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/default
new file mode 100644
index 000000000..dd0825858
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/default
@@ -0,0 +1,43 @@
+authorize {
+  suffix
+  eap {
+    ok = return
+  }
+  files
+}
+
+authenticate {
+  eap
+}
+
+preacct {
+  preprocess
+  acct_unique
+  suffix
+  files
+}
+
+accounting {
+  detail
+  unix
+  radutmp
+  attr_filter.accounting_response
+}
+
+session {
+  radutmp
+}
+
+post-auth {
+  exec
+  Post-Auth-Type REJECT {
+    attr_filter.access_reject
+  }
+}
+
+pre-proxy {
+}
+
+post-proxy {
+  eap
+}
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/inner-tunnel b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/inner-tunnel
new file mode 100644
index 000000000..e088fae14
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/inner-tunnel
@@ -0,0 +1,32 @@
+server inner-tunnel {
+
+authorize {
+	suffix
+	eap {
+		ok = return
+	}
+	files
+}
+
+authenticate {
+	eap
+}
+
+session {
+	radutmp
+}
+
+post-auth {
+	Post-Auth-Type REJECT {
+		attr_filter.access_reject
+	}
+}
+
+pre-proxy {
+}
+
+post-proxy {
+	eap
+}
+
+} # inner-tunnel server block
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second
new file mode 100644
index 000000000..c5bde6a9e
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second
@@ -0,0 +1,36 @@
+server inner-tunnel-second {
+
+authorize {
+	eap_tnc {
+		ok = return
+	}
+}
+
+authenticate {
+	eap_tnc
+}
+
+session {
+	radutmp
+}
+
+post-auth {
+	if (control:TNC-Status == "Access") {
+		update reply {
+			Tunnel-Type := ESP
+			Filter-Id := "allow"
+		}
+	}
+	elsif (control:TNC-Status == "Isolate") {
+		update reply {
+			Tunnel-Type := ESP
+			Filter-Id := "isolate"
+		}
+	}
+
+	Post-Auth-Type REJECT {
+		attr_filter.access_reject
+	}
+}
+
+} # inner-tunnel-second block
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/users b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/users
new file mode 100644
index 000000000..50ccf3e76
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/users
@@ -0,0 +1,2 @@
+carol	Cleartext-Password := "Ar3etTnp"
+dave	Cleartext-Password := "W7R0g3do"
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/strongswan.conf
new file mode 100644
index 000000000..45050f7e1
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/strongswan.conf
@@ -0,0 +1,11 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+libimcv {
+  debug_level = 3 
+  assessment_result = no
+  plugins {
+    imv-test {
+      rounds = 1 
+    }
+  }
+}
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/tnc/log4cxx.properties b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/tnc/log4cxx.properties
new file mode 100644
index 000000000..2bdc6e4de
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/tnc/log4cxx.properties
@@ -0,0 +1,15 @@
+# Set root logger level to DEBUG and its appenders to A1 and A2.
+log4j.rootLogger=DEBUG, A1, A2
+
+# A1 is set to be a ConsoleAppender.
+log4j.appender.A1=org.apache.log4j.ConsoleAppender
+log4j.appender.A1.layout=org.apache.log4j.PatternLayout
+log4j.appender.A1.layout.ConversionPattern=[FHH] %m%n
+
+# A2 is set to be a SyslogAppender
+log4j.appender.A2=org.apache.log4j.net.SyslogAppender
+log4j.appender.A2.Facility=DAEMON
+log4j.appender.A2.SyslogHost=localhost
+log4j.appender.A2.Threshold=DEBUG
+log4j.appender.A2.layout=org.apache.log4j.PatternLayout
+log4j.appender.A2.layout.ConversionPattern=[FHH] %m%n
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/tnc_config b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/tnc_config
new file mode 100644
index 000000000..da732f68b
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/tnc_config
@@ -0,0 +1,4 @@
+#IMV configuration file for strongSwan client 
+
+IMV "Test"	/usr/local/lib/ipsec/imcvs/imv-test.so
+IMV "Scanner"	/usr/local/lib/ipsec/imcvs/imv-scanner.so
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/ipsec.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/ipsec.conf
new file mode 100644
index 000000000..f24455975
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/ipsec.conf
@@ -0,0 +1 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/ipsec.secrets b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/ipsec.secrets
new file mode 100644
index 000000000..ddd495699
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/ipsec.secrets
@@ -0,0 +1 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/strongswan.conf
new file mode 100644
index 000000000..71fbae695
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/strongswan.conf
@@ -0,0 +1,10 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+libimcv {
+  debug_level = 3
+  plugins {
+    imc-test {
+      command = allow
+    }
+  }
+}
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/tnc_config b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/tnc_config
new file mode 100644
index 000000000..b4288fd53
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/tnc_config
@@ -0,0 +1,4 @@
+#IMC configuration file for strongSwan client 
+
+IMC "Test" /usr/local/lib/ipsec/imcvs/imc-test.so
+IMC "Scanner" /usr/local/lib/ipsec/imcvs/imc-scanner.so
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/wpa_supplicant.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/wpa_supplicant.conf
new file mode 100644
index 000000000..92d84f570
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/wpa_supplicant.conf
@@ -0,0 +1,10 @@
+ network={
+     ssid="eap_ttls" 
+     scan_ssid=0
+     key_mgmt=IEEE8021X
+     eap=TTLS
+     identity="carol"
+     password="Ar3etTnp"
+     ca_cert="/etc/ipsec.d/cacerts/strongswanCert.pem" 
+     id_str="" 
+ }
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/ipsec.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/ipsec.conf
new file mode 100644
index 000000000..f24455975
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/ipsec.conf
@@ -0,0 +1 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/ipsec.secrets b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/ipsec.secrets
new file mode 100644
index 000000000..ddd495699
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/ipsec.secrets
@@ -0,0 +1 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/strongswan.conf
new file mode 100644
index 000000000..4ce2769f2
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/strongswan.conf
@@ -0,0 +1,10 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+libimcv {
+  debug_level = 3
+  plugins {
+    imc-test {
+      command = isolate
+    }
+  }
+}
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/tnc_config b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/tnc_config
new file mode 100644
index 000000000..b4288fd53
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/tnc_config
@@ -0,0 +1,4 @@
+#IMC configuration file for strongSwan client 
+
+IMC "Test" /usr/local/lib/ipsec/imcvs/imc-test.so
+IMC "Scanner" /usr/local/lib/ipsec/imcvs/imc-scanner.so
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/wpa_supplicant.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/wpa_supplicant.conf
new file mode 100644
index 000000000..37a343df6
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/wpa_supplicant.conf
@@ -0,0 +1,10 @@
+ network={
+     ssid="eap_ttls" 
+     scan_ssid=0
+     key_mgmt=IEEE8021X
+     eap=TTLS
+     identity="dave"
+     password="W7R0g3do"
+     ca_cert="/etc/ipsec.d/cacerts/strongswanCert.pem" 
+     id_str="" 
+ }
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/hostapd/hostapd.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/hostapd/hostapd.conf
new file mode 100644
index 000000000..c84fcbd91
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/hostapd/hostapd.conf
@@ -0,0 +1,1127 @@
+##### hostapd configuration file ##############################################
+# Empty lines and lines starting with # are ignored
+
+# AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for
+# management frames); ath0 for madwifi
+interface=eth0
+
+# In case of madwifi, atheros, and nl80211 driver interfaces, an additional
+# configuration parameter, bridge, may be used to notify hostapd if the
+# interface is included in a bridge. This parameter is not used with Host AP
+# driver. If the bridge parameter is not set, the drivers will automatically
+# figure out the bridge interface (assuming sysfs is enabled and mounted to
+# /sys) and this parameter may not be needed.
+#
+# For nl80211, this parameter can be used to request the AP interface to be
+# added to the bridge automatically (brctl may refuse to do this before hostapd
+# has been started to change the interface mode). If needed, the bridge
+# interface is also created.
+#bridge=br0
+
+# Driver interface type (hostap/wired/madwifi/test/none/nl80211/bsd);
+# default: hostap). nl80211 is used with all Linux mac80211 drivers.
+# Use driver=none if building hostapd as a standalone RADIUS server that does
+# not control any wireless/wired driver.
+driver=wired
+
+# hostapd event logger configuration
+#
+# Two output method: syslog and stdout (only usable if not forking to
+# background).
+#
+# Module bitfield (ORed bitfield of modules that will be logged; -1 = all
+# modules):
+# bit 0 (1) = IEEE 802.11
+# bit 1 (2) = IEEE 802.1X
+# bit 2 (4) = RADIUS
+# bit 3 (8) = WPA
+# bit 4 (16) = driver interface
+# bit 5 (32) = IAPP
+# bit 6 (64) = MLME
+#
+# Levels (minimum value for logged events):
+#  0 = verbose debugging
+#  1 = debugging
+#  2 = informational messages
+#  3 = notification
+#  4 = warning
+#
+logger_syslog=-1
+logger_syslog_level=2
+logger_stdout=-1
+logger_stdout_level=0
+
+# Dump file for state information (on SIGUSR1)
+dump_file=/tmp/hostapd.dump
+
+# Interface for separate control program. If this is specified, hostapd
+# will create this directory and a UNIX domain socket for listening to requests
+# from external programs (CLI/GUI, etc.) for status information and
+# configuration. The socket file will be named based on the interface name, so
+# multiple hostapd processes/interfaces can be run at the same time if more
+# than one interface is used.
+# /var/run/hostapd is the recommended directory for sockets and by default,
+# hostapd_cli will use it when trying to connect with hostapd.
+ctrl_interface=/var/run/hostapd
+
+# Access control for the control interface can be configured by setting the
+# directory to allow only members of a group to use sockets. This way, it is
+# possible to run hostapd as root (since it needs to change network
+# configuration and open raw sockets) and still allow GUI/CLI components to be
+# run as non-root users. However, since the control interface can be used to
+# change the network configuration, this access needs to be protected in many
+# cases. By default, hostapd is configured to use gid 0 (root). If you
+# want to allow non-root users to use the contron interface, add a new group
+# and change this value to match with that group. Add users that should have
+# control interface access to this group.
+#
+# This variable can be a group name or gid.
+#ctrl_interface_group=wheel
+ctrl_interface_group=0
+
+
+##### IEEE 802.11 related configuration #######################################
+
+# SSID to be used in IEEE 802.11 management frames
+#ssid=test
+
+# Country code (ISO/IEC 3166-1). Used to set regulatory domain.
+# Set as needed to indicate country in which device is operating.
+# This can limit available channels and transmit power.
+#country_code=US
+
+# Enable IEEE 802.11d. This advertises the country_code and the set of allowed
+# channels and transmit power levels based on the regulatory limits. The
+# country_code setting must be configured with the correct country for
+# IEEE 802.11d functions.
+# (default: 0 = disabled)
+#ieee80211d=1
+
+# Operation mode (a = IEEE 802.11a, b = IEEE 802.11b, g = IEEE 802.11g,
+# Default: IEEE 802.11b
+hw_mode=g
+
+# Channel number (IEEE 802.11)
+# (default: 0, i.e., not set)
+# Please note that some drivers do not use this value from hostapd and the
+# channel will need to be configured separately with iwconfig.
+channel=1
+
+# Beacon interval in kus (1.024 ms) (default: 100; range 15..65535)
+beacon_int=100
+
+# DTIM (delivery traffic information message) period (range 1..255):
+# number of beacons between DTIMs (1 = every beacon includes DTIM element)
+# (default: 2)
+dtim_period=2
+
+# Maximum number of stations allowed in station table. New stations will be
+# rejected after the station table is full. IEEE 802.11 has a limit of 2007
+# different association IDs, so this number should not be larger than that.
+# (default: 2007)
+max_num_sta=255
+
+# RTS/CTS threshold; 2347 = disabled (default); range 0..2347
+# If this field is not included in hostapd.conf, hostapd will not control
+# RTS threshold and 'iwconfig wlan# rts <val>' can be used to set it.
+rts_threshold=2347
+
+# Fragmentation threshold; 2346 = disabled (default); range 256..2346
+# If this field is not included in hostapd.conf, hostapd will not control
+# fragmentation threshold and 'iwconfig wlan# frag <val>' can be used to set
+# it.
+fragm_threshold=2346
+
+# Rate configuration
+# Default is to enable all rates supported by the hardware. This configuration
+# item allows this list be filtered so that only the listed rates will be left
+# in the list. If the list is empty, all rates are used. This list can have
+# entries that are not in the list of rates the hardware supports (such entries
+# are ignored). The entries in this list are in 100 kbps, i.e., 11 Mbps = 110.
+# If this item is present, at least one rate have to be matching with the rates
+# hardware supports.
+# default: use the most common supported rate setting for the selected
+# hw_mode (i.e., this line can be removed from configuration file in most
+# cases)
+#supported_rates=10 20 55 110 60 90 120 180 240 360 480 540
+
+# Basic rate set configuration
+# List of rates (in 100 kbps) that are included in the basic rate set.
+# If this item is not included, usually reasonable default set is used.
+#basic_rates=10 20
+#basic_rates=10 20 55 110
+#basic_rates=60 120 240
+
+# Short Preamble
+# This parameter can be used to enable optional use of short preamble for
+# frames sent at 2 Mbps, 5.5 Mbps, and 11 Mbps to improve network performance.
+# This applies only to IEEE 802.11b-compatible networks and this should only be
+# enabled if the local hardware supports use of short preamble. If any of the
+# associated STAs do not support short preamble, use of short preamble will be
+# disabled (and enabled when such STAs disassociate) dynamically.
+# 0 = do not allow use of short preamble (default)
+# 1 = allow use of short preamble
+#preamble=1
+
+# Station MAC address -based authentication
+# Please note that this kind of access control requires a driver that uses
+# hostapd to take care of management frame processing and as such, this can be
+# used with driver=hostap or driver=nl80211, but not with driver=madwifi.
+# 0 = accept unless in deny list
+# 1 = deny unless in accept list
+# 2 = use external RADIUS server (accept/deny lists are searched first)
+macaddr_acl=0
+
+# Accept/deny lists are read from separate files (containing list of
+# MAC addresses, one per line). Use absolute path name to make sure that the
+# files can be read on SIGHUP configuration reloads.
+#accept_mac_file=/etc/hostapd.accept
+#deny_mac_file=/etc/hostapd.deny
+
+# IEEE 802.11 specifies two authentication algorithms. hostapd can be
+# configured to allow both of these or only one. Open system authentication
+# should be used with IEEE 802.1X.
+# Bit fields of allowed authentication algorithms:
+# bit 0 = Open System Authentication
+# bit 1 = Shared Key Authentication (requires WEP)
+auth_algs=3
+
+# Send empty SSID in beacons and ignore probe request frames that do not
+# specify full SSID, i.e., require stations to know SSID.
+# default: disabled (0)
+# 1 = send empty (length=0) SSID in beacon and ignore probe request for
+#     broadcast SSID
+# 2 = clear SSID (ASCII 0), but keep the original length (this may be required
+#     with some clients that do not support empty SSID) and ignore probe
+#     requests for broadcast SSID
+ignore_broadcast_ssid=0
+
+# TX queue parameters (EDCF / bursting)
+# tx_queue_<queue name>_<param>
+# queues: data0, data1, data2, data3, after_beacon, beacon
+#		(data0 is the highest priority queue)
+# parameters:
+#   aifs: AIFS (default 2)
+#   cwmin: cwMin (1, 3, 7, 15, 31, 63, 127, 255, 511, 1023)
+#   cwmax: cwMax (1, 3, 7, 15, 31, 63, 127, 255, 511, 1023); cwMax >= cwMin
+#   burst: maximum length (in milliseconds with precision of up to 0.1 ms) for
+#          bursting
+#
+# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e):
+# These parameters are used by the access point when transmitting frames
+# to the clients.
+#
+# Low priority / AC_BK = background
+#tx_queue_data3_aifs=7
+#tx_queue_data3_cwmin=15
+#tx_queue_data3_cwmax=1023
+#tx_queue_data3_burst=0
+# Note: for IEEE 802.11b mode: cWmin=31 cWmax=1023 burst=0
+#
+# Normal priority / AC_BE = best effort
+#tx_queue_data2_aifs=3
+#tx_queue_data2_cwmin=15
+#tx_queue_data2_cwmax=63
+#tx_queue_data2_burst=0
+# Note: for IEEE 802.11b mode: cWmin=31 cWmax=127 burst=0
+#
+# High priority / AC_VI = video
+#tx_queue_data1_aifs=1
+#tx_queue_data1_cwmin=7
+#tx_queue_data1_cwmax=15
+#tx_queue_data1_burst=3.0
+# Note: for IEEE 802.11b mode: cWmin=15 cWmax=31 burst=6.0
+#
+# Highest priority / AC_VO = voice
+#tx_queue_data0_aifs=1
+#tx_queue_data0_cwmin=3
+#tx_queue_data0_cwmax=7
+#tx_queue_data0_burst=1.5
+# Note: for IEEE 802.11b mode: cWmin=7 cWmax=15 burst=3.3
+
+# 802.1D Tag (= UP) to AC mappings
+# WMM specifies following mapping of data frames to different ACs. This mapping
+# can be configured using Linux QoS/tc and sch_pktpri.o module.
+# 802.1D Tag	802.1D Designation	Access Category	WMM Designation
+# 1		BK			AC_BK		Background
+# 2		-			AC_BK		Background
+# 0		BE			AC_BE		Best Effort
+# 3		EE			AC_BE		Best Effort
+# 4		CL			AC_VI		Video
+# 5		VI			AC_VI		Video
+# 6		VO			AC_VO		Voice
+# 7		NC			AC_VO		Voice
+# Data frames with no priority information: AC_BE
+# Management frames: AC_VO
+# PS-Poll frames: AC_BE
+
+# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e):
+# for 802.11a or 802.11g networks
+# These parameters are sent to WMM clients when they associate.
+# The parameters will be used by WMM clients for frames transmitted to the
+# access point.
+#
+# note - txop_limit is in units of 32microseconds
+# note - acm is admission control mandatory flag. 0 = admission control not
+# required, 1 = mandatory
+# note - here cwMin and cmMax are in exponent form. the actual cw value used
+# will be (2^n)-1 where n is the value given here
+#
+wmm_enabled=1
+#
+# WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD]
+# Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver)
+#uapsd_advertisement_enabled=1
+#
+# Low priority / AC_BK = background
+wmm_ac_bk_cwmin=4
+wmm_ac_bk_cwmax=10
+wmm_ac_bk_aifs=7
+wmm_ac_bk_txop_limit=0
+wmm_ac_bk_acm=0
+# Note: for IEEE 802.11b mode: cWmin=5 cWmax=10
+#
+# Normal priority / AC_BE = best effort
+wmm_ac_be_aifs=3
+wmm_ac_be_cwmin=4
+wmm_ac_be_cwmax=10
+wmm_ac_be_txop_limit=0
+wmm_ac_be_acm=0
+# Note: for IEEE 802.11b mode: cWmin=5 cWmax=7
+#
+# High priority / AC_VI = video
+wmm_ac_vi_aifs=2
+wmm_ac_vi_cwmin=3
+wmm_ac_vi_cwmax=4
+wmm_ac_vi_txop_limit=94
+wmm_ac_vi_acm=0
+# Note: for IEEE 802.11b mode: cWmin=4 cWmax=5 txop_limit=188
+#
+# Highest priority / AC_VO = voice
+wmm_ac_vo_aifs=2
+wmm_ac_vo_cwmin=2
+wmm_ac_vo_cwmax=3
+wmm_ac_vo_txop_limit=47
+wmm_ac_vo_acm=0
+# Note: for IEEE 802.11b mode: cWmin=3 cWmax=4 burst=102
+
+# Static WEP key configuration
+#
+# The key number to use when transmitting.
+# It must be between 0 and 3, and the corresponding key must be set.
+# default: not set
+#wep_default_key=0
+# The WEP keys to use.
+# A key may be a quoted string or unquoted hexadecimal digits.
+# The key length should be 5, 13, or 16 characters, or 10, 26, or 32
+# digits, depending on whether 40-bit (64-bit), 104-bit (128-bit), or
+# 128-bit (152-bit) WEP is used.
+# Only the default key must be supplied; the others are optional.
+# default: not set
+#wep_key0=123456789a
+#wep_key1="vwxyz"
+#wep_key2=0102030405060708090a0b0c0d
+#wep_key3=".2.4.6.8.0.23"
+
+# Station inactivity limit
+#
+# If a station does not send anything in ap_max_inactivity seconds, an
+# empty data frame is sent to it in order to verify whether it is
+# still in range. If this frame is not ACKed, the station will be
+# disassociated and then deauthenticated. This feature is used to
+# clear station table of old entries when the STAs move out of the
+# range.
+#
+# The station can associate again with the AP if it is still in range;
+# this inactivity poll is just used as a nicer way of verifying
+# inactivity; i.e., client will not report broken connection because
+# disassociation frame is not sent immediately without first polling
+# the STA with a data frame.
+# default: 300 (i.e., 5 minutes)
+ap_max_inactivity=30
+
+# Disassociate stations based on excessive transmission failures or other
+# indications of connection loss. This depends on the driver capabilities and
+# may not be available with all drivers.
+#disassoc_low_ack=1
+
+# Maximum allowed Listen Interval (how many Beacon periods STAs are allowed to
+# remain asleep). Default: 65535 (no limit apart from field size)
+#max_listen_interval=100
+
+# WDS (4-address frame) mode with per-station virtual interfaces
+# (only supported with driver=nl80211)
+# This mode allows associated stations to use 4-address frames to allow layer 2
+# bridging to be used.
+#wds_sta=1
+
+# If bridge parameter is set, the WDS STA interface will be added to the same
+# bridge by default. This can be overridden with the wds_bridge parameter to
+# use a separate bridge.
+#wds_bridge=wds-br0
+
+# Client isolation can be used to prevent low-level bridging of frames between
+# associated stations in the BSS. By default, this bridging is allowed.
+#ap_isolate=1
+
+##### IEEE 802.11n related configuration ######################################
+
+# ieee80211n: Whether IEEE 802.11n (HT) is enabled
+# 0 = disabled (default)
+# 1 = enabled
+# Note: You will also need to enable WMM for full HT functionality.
+#ieee80211n=1
+
+# ht_capab: HT capabilities (list of flags)
+# LDPC coding capability: [LDPC] = supported
+# Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary
+#	channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz
+#	with secondary channel below the primary channel
+#	(20 MHz only if neither is set)
+#	Note: There are limits on which channels can be used with HT40- and
+#	HT40+. Following table shows the channels that may be available for
+#	HT40- and HT40+ use per IEEE 802.11n Annex J:
+#	freq		HT40-		HT40+
+#	2.4 GHz		5-13		1-7 (1-9 in Europe/Japan)
+#	5 GHz		40,48,56,64	36,44,52,60
+#	(depending on the location, not all of these channels may be available
+#	for use)
+#	Please note that 40 MHz channels may switch their primary and secondary
+#	channels if needed or creation of 40 MHz channel maybe rejected based
+#	on overlapping BSSes. These changes are done automatically when hostapd
+#	is setting up the 40 MHz channel.
+# Spatial Multiplexing (SM) Power Save: [SMPS-STATIC] or [SMPS-DYNAMIC]
+#	(SMPS disabled if neither is set)
+# HT-greenfield: [GF] (disabled if not set)
+# Short GI for 20 MHz: [SHORT-GI-20] (disabled if not set)
+# Short GI for 40 MHz: [SHORT-GI-40] (disabled if not set)
+# Tx STBC: [TX-STBC] (disabled if not set)
+# Rx STBC: [RX-STBC1] (one spatial stream), [RX-STBC12] (one or two spatial
+#	streams), or [RX-STBC123] (one, two, or three spatial streams); Rx STBC
+#	disabled if none of these set
+# HT-delayed Block Ack: [DELAYED-BA] (disabled if not set)
+# Maximum A-MSDU length: [MAX-AMSDU-7935] for 7935 octets (3839 octets if not
+#	set)
+# DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set)
+# PSMP support: [PSMP] (disabled if not set)
+# L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set)
+#ht_capab=[HT40-][SHORT-GI-20][SHORT-GI-40]
+
+# Require stations to support HT PHY (reject association if they do not)
+#require_ht=1
+
+##### IEEE 802.1X-2004 related configuration ##################################
+
+# Require IEEE 802.1X authorization
+ieee8021x=1
+
+# IEEE 802.1X/EAPOL version
+# hostapd is implemented based on IEEE Std 802.1X-2004 which defines EAPOL
+# version 2. However, there are many client implementations that do not handle
+# the new version number correctly (they seem to drop the frames completely).
+# In order to make hostapd interoperate with these clients, the version number
+# can be set to the older version (1) with this configuration value.
+#eapol_version=2
+
+# Optional displayable message sent with EAP Request-Identity. The first \0
+# in this string will be converted to ASCII-0 (nul). This can be used to
+# separate network info (comma separated list of attribute=value pairs); see,
+# e.g., RFC 4284.
+#eap_message=hello
+#eap_message=hello\0networkid=netw,nasid=foo,portid=0,NAIRealms=example.com
+
+# WEP rekeying (disabled if key lengths are not set or are set to 0)
+# Key lengths for default/broadcast and individual/unicast keys:
+# 5 = 40-bit WEP (also known as 64-bit WEP with 40 secret bits)
+# 13 = 104-bit WEP (also known as 128-bit WEP with 104 secret bits)
+#wep_key_len_broadcast=5
+#wep_key_len_unicast=5
+# Rekeying period in seconds. 0 = do not rekey (i.e., set keys only once)
+#wep_rekey_period=300
+
+# EAPOL-Key index workaround (set bit7) for WinXP Supplicant (needed only if
+# only broadcast keys are used)
+eapol_key_index_workaround=0
+
+# EAP reauthentication period in seconds (default: 3600 seconds; 0 = disable
+# reauthentication).
+#eap_reauth_period=3600
+
+# Use PAE group address (01:80:c2:00:00:03) instead of individual target
+# address when sending EAPOL frames with driver=wired. This is the most common
+# mechanism used in wired authentication, but it also requires that the port
+# is only used by one station.
+#use_pae_group_addr=1
+
+##### Integrated EAP server ###################################################
+
+# Optionally, hostapd can be configured to use an integrated EAP server
+# to process EAP authentication locally without need for an external RADIUS
+# server. This functionality can be used both as a local authentication server
+# for IEEE 802.1X/EAPOL and as a RADIUS server for other devices.
+
+# Use integrated EAP server instead of external RADIUS authentication
+# server. This is also needed if hostapd is configured to act as a RADIUS
+# authentication server.
+eap_server=0
+
+# Path for EAP server user database
+#eap_user_file=/etc/hostapd.eap_user
+
+# CA certificate (PEM or DER file) for EAP-TLS/PEAP/TTLS
+#ca_cert=/etc/hostapd.ca.pem
+
+# Server certificate (PEM or DER file) for EAP-TLS/PEAP/TTLS
+#server_cert=/etc/hostapd.server.pem
+
+# Private key matching with the server certificate for EAP-TLS/PEAP/TTLS
+# This may point to the same file as server_cert if both certificate and key
+# are included in a single file. PKCS#12 (PFX) file (.p12/.pfx) can also be
+# used by commenting out server_cert and specifying the PFX file as the
+# private_key.
+#private_key=/etc/hostapd.server.prv
+
+# Passphrase for private key
+#private_key_passwd=secret passphrase
+
+# Enable CRL verification.
+# Note: hostapd does not yet support CRL downloading based on CDP. Thus, a
+# valid CRL signed by the CA is required to be included in the ca_cert file.
+# This can be done by using PEM format for CA certificate and CRL and
+# concatenating these into one file. Whenever CRL changes, hostapd needs to be
+# restarted to take the new CRL into use.
+# 0 = do not verify CRLs (default)
+# 1 = check the CRL of the user certificate
+# 2 = check all CRLs in the certificate path
+#check_crl=1
+
+# dh_file: File path to DH/DSA parameters file (in PEM format)
+# This is an optional configuration file for setting parameters for an
+# ephemeral DH key exchange. In most cases, the default RSA authentication does
+# not use this configuration. However, it is possible setup RSA to use
+# ephemeral DH key exchange. In addition, ciphers with DSA keys always use
+# ephemeral DH keys. This can be used to achieve forward secrecy. If the file
+# is in DSA parameters format, it will be automatically converted into DH
+# params. This parameter is required if anonymous EAP-FAST is used.
+# You can generate DH parameters file with OpenSSL, e.g.,
+# "openssl dhparam -out /etc/hostapd.dh.pem 1024"
+#dh_file=/etc/hostapd.dh.pem
+
+# Fragment size for EAP methods
+#fragment_size=1400
+
+# Configuration data for EAP-SIM database/authentication gateway interface.
+# This is a text string in implementation specific format. The example
+# implementation in eap_sim_db.c uses this as the UNIX domain socket name for
+# the HLR/AuC gateway (e.g., hlr_auc_gw). In this case, the path uses "unix:"
+# prefix.
+#eap_sim_db=unix:/tmp/hlr_auc_gw.sock
+
+# Encryption key for EAP-FAST PAC-Opaque values. This key must be a secret,
+# random value. It is configured as a 16-octet value in hex format. It can be
+# generated, e.g., with the following command:
+# od -tx1 -v -N16 /dev/random | colrm 1 8 | tr -d ' '
+#pac_opaque_encr_key=000102030405060708090a0b0c0d0e0f
+
+# EAP-FAST authority identity (A-ID)
+# A-ID indicates the identity of the authority that issues PACs. The A-ID
+# should be unique across all issuing servers. In theory, this is a variable
+# length field, but due to some existing implementations requiring A-ID to be
+# 16 octets in length, it is strongly recommended to use that length for the
+# field to provid interoperability with deployed peer implementations. This
+# field is configured in hex format.
+#eap_fast_a_id=101112131415161718191a1b1c1d1e1f
+
+# EAP-FAST authority identifier information (A-ID-Info)
+# This is a user-friendly name for the A-ID. For example, the enterprise name
+# and server name in a human-readable format. This field is encoded as UTF-8.
+#eap_fast_a_id_info=test server
+
+# Enable/disable different EAP-FAST provisioning modes:
+#0 = provisioning disabled
+#1 = only anonymous provisioning allowed
+#2 = only authenticated provisioning allowed
+#3 = both provisioning modes allowed (default)
+#eap_fast_prov=3
+
+# EAP-FAST PAC-Key lifetime in seconds (hard limit)
+#pac_key_lifetime=604800
+
+# EAP-FAST PAC-Key refresh time in seconds (soft limit on remaining hard
+# limit). The server will generate a new PAC-Key when this number of seconds
+# (or fewer) of the lifetime remains.
+#pac_key_refresh_time=86400
+
+# EAP-SIM and EAP-AKA protected success/failure indication using AT_RESULT_IND
+# (default: 0 = disabled).
+#eap_sim_aka_result_ind=1
+
+# Trusted Network Connect (TNC)
+# If enabled, TNC validation will be required before the peer is allowed to
+# connect. Note: This is only used with EAP-TTLS and EAP-FAST. If any other
+# EAP method is enabled, the peer will be allowed to connect without TNC.
+#tnc=1
+
+
+##### IEEE 802.11f - Inter-Access Point Protocol (IAPP) #######################
+
+# Interface to be used for IAPP broadcast packets
+#iapp_interface=eth0
+
+
+##### RADIUS client configuration #############################################
+# for IEEE 802.1X with external Authentication Server, IEEE 802.11
+# authentication with external ACL for MAC addresses, and accounting
+
+# The own IP address of the access point (used as NAS-IP-Address)
+own_ip_addr=10.1.0.1
+
+# Optional NAS-Identifier string for RADIUS messages. When used, this should be
+# a unique to the NAS within the scope of the RADIUS server. For example, a
+# fully qualified domain name can be used here.
+# When using IEEE 802.11r, nas_identifier must be set and must be between 1 and
+# 48 octets long.
+#nas_identifier=ap.example.com
+
+# RADIUS authentication server
+auth_server_addr=10.1.0.10
+#auth_server_port=1812
+auth_server_shared_secret=gv6URkSs
+
+# RADIUS accounting server
+#acct_server_addr=127.0.0.1
+#acct_server_port=1813
+#acct_server_shared_secret=secret
+
+# Secondary RADIUS servers; to be used if primary one does not reply to
+# RADIUS packets. These are optional and there can be more than one secondary
+# server listed.
+#auth_server_addr=127.0.0.2
+#auth_server_port=1812
+#auth_server_shared_secret=secret2
+#
+#acct_server_addr=127.0.0.2
+#acct_server_port=1813
+#acct_server_shared_secret=secret2
+
+# Retry interval for trying to return to the primary RADIUS server (in
+# seconds). RADIUS client code will automatically try to use the next server
+# when the current server is not replying to requests. If this interval is set,
+# primary server will be retried after configured amount of time even if the
+# currently used secondary server is still working.
+#radius_retry_primary_interval=600
+
+
+# Interim accounting update interval
+# If this is set (larger than 0) and acct_server is configured, hostapd will
+# send interim accounting updates every N seconds. Note: if set, this overrides
+# possible Acct-Interim-Interval attribute in Access-Accept message. Thus, this
+# value should not be configured in hostapd.conf, if RADIUS server is used to
+# control the interim interval.
+# This value should not be less 600 (10 minutes) and must not be less than
+# 60 (1 minute).
+#radius_acct_interim_interval=600
+
+# Dynamic VLAN mode; allow RADIUS authentication server to decide which VLAN
+# is used for the stations. This information is parsed from following RADIUS
+# attributes based on RFC 3580 and RFC 2868: Tunnel-Type (value 13 = VLAN),
+# Tunnel-Medium-Type (value 6 = IEEE 802), Tunnel-Private-Group-ID (value
+# VLANID as a string). vlan_file option below must be configured if dynamic
+# VLANs are used. Optionally, the local MAC ACL list (accept_mac_file) can be
+# used to set static client MAC address to VLAN ID mapping.
+# 0 = disabled (default)
+# 1 = option; use default interface if RADIUS server does not include VLAN ID
+# 2 = required; reject authentication if RADIUS server does not include VLAN ID
+#dynamic_vlan=0
+
+# VLAN interface list for dynamic VLAN mode is read from a separate text file.
+# This list is used to map VLAN ID from the RADIUS server to a network
+# interface. Each station is bound to one interface in the same way as with
+# multiple BSSIDs or SSIDs. Each line in this text file is defining a new
+# interface and the line must include VLAN ID and interface name separated by
+# white space (space or tab).
+#vlan_file=/etc/hostapd.vlan
+
+# Interface where 802.1q tagged packets should appear when a RADIUS server is
+# used to determine which VLAN a station is on.  hostapd creates a bridge for
+# each VLAN.  Then hostapd adds a VLAN interface (associated with the interface
+# indicated by 'vlan_tagged_interface') and the appropriate wireless interface
+# to the bridge.
+#vlan_tagged_interface=eth0
+
+
+##### RADIUS authentication server configuration ##############################
+
+# hostapd can be used as a RADIUS authentication server for other hosts. This
+# requires that the integrated EAP server is also enabled and both
+# authentication services are sharing the same configuration.
+
+# File name of the RADIUS clients configuration for the RADIUS server. If this
+# commented out, RADIUS server is disabled.
+#radius_server_clients=/etc/hostapd.radius_clients
+
+# The UDP port number for the RADIUS authentication server
+#radius_server_auth_port=1812
+
+# Use IPv6 with RADIUS server (IPv4 will also be supported using IPv6 API)
+#radius_server_ipv6=1
+
+
+##### WPA/IEEE 802.11i configuration ##########################################
+
+# Enable WPA. Setting this variable configures the AP to require WPA (either
+# WPA-PSK or WPA-RADIUS/EAP based on other configuration). For WPA-PSK, either
+# wpa_psk or wpa_passphrase must be set and wpa_key_mgmt must include WPA-PSK.
+# For WPA-RADIUS/EAP, ieee8021x must be set (but without dynamic WEP keys),
+# RADIUS authentication server must be configured, and WPA-EAP must be included
+# in wpa_key_mgmt.
+# This field is a bit field that can be used to enable WPA (IEEE 802.11i/D3.0)
+# and/or WPA2 (full IEEE 802.11i/RSN):
+# bit0 = WPA
+# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
+#wpa=1
+
+# WPA pre-shared keys for WPA-PSK. This can be either entered as a 256-bit
+# secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase
+# (8..63 characters) that will be converted to PSK. This conversion uses SSID
+# so the PSK changes when ASCII passphrase is used and the SSID is changed.
+# wpa_psk (dot11RSNAConfigPSKValue)
+# wpa_passphrase (dot11RSNAConfigPSKPassPhrase)
+#wpa_psk=0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
+#wpa_passphrase=secret passphrase
+
+# Optionally, WPA PSKs can be read from a separate text file (containing list
+# of (PSK,MAC address) pairs. This allows more than one PSK to be configured.
+# Use absolute path name to make sure that the files can be read on SIGHUP
+# configuration reloads.
+#wpa_psk_file=/etc/hostapd.wpa_psk
+
+# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
+# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
+# added to enable SHA256-based stronger algorithms.
+# (dot11RSNAConfigAuthenticationSuitesTable)
+#wpa_key_mgmt=WPA-PSK WPA-EAP
+
+# Set of accepted cipher suites (encryption algorithms) for pairwise keys
+# (unicast packets). This is a space separated list of algorithms:
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# Group cipher suite (encryption algorithm for broadcast and multicast frames)
+# is automatically selected based on this configuration. If only CCMP is
+# allowed as the pairwise cipher, group cipher will also be CCMP. Otherwise,
+# TKIP will be used as the group cipher.
+# (dot11RSNAConfigPairwiseCiphersTable)
+# Pairwise cipher for WPA (v1) (default: TKIP)
+#wpa_pairwise=TKIP CCMP
+# Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value)
+#rsn_pairwise=CCMP
+
+# Time interval for rekeying GTK (broadcast/multicast encryption keys) in
+# seconds. (dot11RSNAConfigGroupRekeyTime)
+#wpa_group_rekey=600
+
+# Rekey GTK when any STA that possesses the current GTK is leaving the BSS.
+# (dot11RSNAConfigGroupRekeyStrict)
+#wpa_strict_rekey=1
+
+# Time interval for rekeying GMK (master key used internally to generate GTKs
+# (in seconds).
+#wpa_gmk_rekey=86400
+
+# Maximum lifetime for PTK in seconds. This can be used to enforce rekeying of
+# PTK to mitigate some attacks against TKIP deficiencies.
+#wpa_ptk_rekey=600
+
+# Enable IEEE 802.11i/RSN/WPA2 pre-authentication. This is used to speed up
+# roaming be pre-authenticating IEEE 802.1X/EAP part of the full RSN
+# authentication and key handshake before actually associating with a new AP.
+# (dot11RSNAPreauthenticationEnabled)
+#rsn_preauth=1
+#
+# Space separated list of interfaces from which pre-authentication frames are
+# accepted (e.g., 'eth0' or 'eth0 wlan0wds0'. This list should include all
+# interface that are used for connections to other APs. This could include
+# wired interfaces and WDS links. The normal wireless data interface towards
+# associated stations (e.g., wlan0) should not be added, since
+# pre-authentication is only used with APs other than the currently associated
+# one.
+#rsn_preauth_interfaces=eth0
+
+# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e) is
+# allowed. This is only used with RSN/WPA2.
+# 0 = disabled (default)
+# 1 = enabled
+#peerkey=1
+
+# ieee80211w: Whether management frame protection (MFP) is enabled
+# 0 = disabled (default)
+# 1 = optional
+# 2 = required
+#ieee80211w=0
+
+# Association SA Query maximum timeout (in TU = 1.024 ms; for MFP)
+# (maximum time to wait for a SA Query response)
+# dot11AssociationSAQueryMaximumTimeout, 1...4294967295
+#assoc_sa_query_max_timeout=1000
+
+# Association SA Query retry timeout (in TU = 1.024 ms; for MFP)
+# (time between two subsequent SA Query requests)
+# dot11AssociationSAQueryRetryTimeout, 1...4294967295
+#assoc_sa_query_retry_timeout=201
+
+# disable_pmksa_caching: Disable PMKSA caching
+# This parameter can be used to disable caching of PMKSA created through EAP
+# authentication. RSN preauthentication may still end up using PMKSA caching if
+# it is enabled (rsn_preauth=1).
+# 0 = PMKSA caching enabled (default)
+# 1 = PMKSA caching disabled
+#disable_pmksa_caching=0
+
+# okc: Opportunistic Key Caching (aka Proactive Key Caching)
+# Allow PMK cache to be shared opportunistically among configured interfaces
+# and BSSes (i.e., all configurations within a single hostapd process).
+# 0 = disabled (default)
+# 1 = enabled
+#okc=1
+
+
+##### IEEE 802.11r configuration ##############################################
+
+# Mobility Domain identifier (dot11FTMobilityDomainID, MDID)
+# MDID is used to indicate a group of APs (within an ESS, i.e., sharing the
+# same SSID) between which a STA can use Fast BSS Transition.
+# 2-octet identifier as a hex string.
+#mobility_domain=a1b2
+
+# PMK-R0 Key Holder identifier (dot11FTR0KeyHolderID)
+# 1 to 48 octet identifier.
+# This is configured with nas_identifier (see RADIUS client section above).
+
+# Default lifetime of the PMK-RO in minutes; range 1..65535
+# (dot11FTR0KeyLifetime)
+#r0_key_lifetime=10000
+
+# PMK-R1 Key Holder identifier (dot11FTR1KeyHolderID)
+# 6-octet identifier as a hex string.
+#r1_key_holder=000102030405
+
+# Reassociation deadline in time units (TUs / 1.024 ms; range 1000..65535)
+# (dot11FTReassociationDeadline)
+#reassociation_deadline=1000
+
+# List of R0KHs in the same Mobility Domain
+# format: <MAC address> <NAS Identifier> <128-bit key as hex string>
+# This list is used to map R0KH-ID (NAS Identifier) to a destination MAC
+# address when requesting PMK-R1 key from the R0KH that the STA used during the
+# Initial Mobility Domain Association.
+#r0kh=02:01:02:03:04:05 r0kh-1.example.com 000102030405060708090a0b0c0d0e0f
+#r0kh=02:01:02:03:04:06 r0kh-2.example.com 00112233445566778899aabbccddeeff
+# And so on.. One line per R0KH.
+
+# List of R1KHs in the same Mobility Domain
+# format: <MAC address> <R1KH-ID> <128-bit key as hex string>
+# This list is used to map R1KH-ID to a destination MAC address when sending
+# PMK-R1 key from the R0KH. This is also the list of authorized R1KHs in the MD
+# that can request PMK-R1 keys.
+#r1kh=02:01:02:03:04:05 02:11:22:33:44:55 000102030405060708090a0b0c0d0e0f
+#r1kh=02:01:02:03:04:06 02:11:22:33:44:66 00112233445566778899aabbccddeeff
+# And so on.. One line per R1KH.
+
+# Whether PMK-R1 push is enabled at R0KH
+# 0 = do not push PMK-R1 to all configured R1KHs (default)
+# 1 = push PMK-R1 to all configured R1KHs whenever a new PMK-R0 is derived
+#pmk_r1_push=1
+
+##### Neighbor table ##########################################################
+# Maximum number of entries kept in AP table (either for neigbor table or for
+# detecting Overlapping Legacy BSS Condition). The oldest entry will be
+# removed when adding a new entry that would make the list grow over this
+# limit. Note! WFA certification for IEEE 802.11g requires that OLBC is
+# enabled, so this field should not be set to 0 when using IEEE 802.11g.
+# default: 255
+#ap_table_max_size=255
+
+# Number of seconds of no frames received after which entries may be deleted
+# from the AP table. Since passive scanning is not usually performed frequently
+# this should not be set to very small value. In addition, there is no
+# guarantee that every scan cycle will receive beacon frames from the
+# neighboring APs.
+# default: 60
+#ap_table_expiration_time=3600
+
+
+##### Wi-Fi Protected Setup (WPS) #############################################
+
+# WPS state
+# 0 = WPS disabled (default)
+# 1 = WPS enabled, not configured
+# 2 = WPS enabled, configured
+#wps_state=2
+
+# AP can be configured into a locked state where new WPS Registrar are not
+# accepted, but previously authorized Registrars (including the internal one)
+# can continue to add new Enrollees.
+#ap_setup_locked=1
+
+# Universally Unique IDentifier (UUID; see RFC 4122) of the device
+# This value is used as the UUID for the internal WPS Registrar. If the AP
+# is also using UPnP, this value should be set to the device's UPnP UUID.
+# If not configured, UUID will be generated based on the local MAC address.
+#uuid=12345678-9abc-def0-1234-56789abcdef0
+
+# Note: If wpa_psk_file is set, WPS is used to generate random, per-device PSKs
+# that will be appended to the wpa_psk_file. If wpa_psk_file is not set, the
+# default PSK (wpa_psk/wpa_passphrase) will be delivered to Enrollees. Use of
+# per-device PSKs is recommended as the more secure option (i.e., make sure to
+# set wpa_psk_file when using WPS with WPA-PSK).
+
+# When an Enrollee requests access to the network with PIN method, the Enrollee
+# PIN will need to be entered for the Registrar. PIN request notifications are
+# sent to hostapd ctrl_iface monitor. In addition, they can be written to a
+# text file that could be used, e.g., to populate the AP administration UI with
+# pending PIN requests. If the following variable is set, the PIN requests will
+# be written to the configured file.
+#wps_pin_requests=/var/run/hostapd_wps_pin_requests
+
+# Device Name
+# User-friendly description of device; up to 32 octets encoded in UTF-8
+#device_name=Wireless AP
+
+# Manufacturer
+# The manufacturer of the device (up to 64 ASCII characters)
+#manufacturer=Company
+
+# Model Name
+# Model of the device (up to 32 ASCII characters)
+#model_name=WAP
+
+# Model Number
+# Additional device description (up to 32 ASCII characters)
+#model_number=123
+
+# Serial Number
+# Serial number of the device (up to 32 characters)
+#serial_number=12345
+
+# Primary Device Type
+# Used format: <categ>-<OUI>-<subcateg>
+# categ = Category as an integer value
+# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for
+#       default WPS OUI
+# subcateg = OUI-specific Sub Category as an integer value
+# Examples:
+#   1-0050F204-1 (Computer / PC)
+#   1-0050F204-2 (Computer / Server)
+#   5-0050F204-1 (Storage / NAS)
+#   6-0050F204-1 (Network Infrastructure / AP)
+#device_type=6-0050F204-1
+
+# OS Version
+# 4-octet operating system version number (hex string)
+#os_version=01020300
+
+# Config Methods
+# List of the supported configuration methods
+# Available methods: usba ethernet label display ext_nfc_token int_nfc_token
+#	nfc_interface push_button keypad virtual_display physical_display
+#	virtual_push_button physical_push_button
+#config_methods=label virtual_display virtual_push_button keypad
+
+# WPS capability discovery workaround for PBC with Windows 7
+# Windows 7 uses incorrect way of figuring out AP's WPS capabilities by acting
+# as a Registrar and using M1 from the AP. The config methods attribute in that
+# message is supposed to indicate only the configuration method supported by
+# the AP in Enrollee role, i.e., to add an external Registrar. For that case,
+# PBC shall not be used and as such, the PushButton config method is removed
+# from M1 by default. If pbc_in_m1=1 is included in the configuration file,
+# the PushButton config method is left in M1 (if included in config_methods
+# parameter) to allow Windows 7 to use PBC instead of PIN (e.g., from a label
+# in the AP).
+#pbc_in_m1=1
+
+# Static access point PIN for initial configuration and adding Registrars
+# If not set, hostapd will not allow external WPS Registrars to control the
+# access point. The AP PIN can also be set at runtime with hostapd_cli
+# wps_ap_pin command. Use of temporary (enabled by user action) and random
+# AP PIN is much more secure than configuring a static AP PIN here. As such,
+# use of the ap_pin parameter is not recommended if the AP device has means for
+# displaying a random PIN.
+#ap_pin=12345670
+
+# Skip building of automatic WPS credential
+# This can be used to allow the automatically generated Credential attribute to
+# be replaced with pre-configured Credential(s).
+#skip_cred_build=1
+
+# Additional Credential attribute(s)
+# This option can be used to add pre-configured Credential attributes into M8
+# message when acting as a Registrar. If skip_cred_build=1, this data will also
+# be able to override the Credential attribute that would have otherwise been
+# automatically generated based on network configuration. This configuration
+# option points to an external file that much contain the WPS Credential
+# attribute(s) as binary data.
+#extra_cred=hostapd.cred
+
+# Credential processing
+#   0 = process received credentials internally (default)
+#   1 = do not process received credentials; just pass them over ctrl_iface to
+#	external program(s)
+#   2 = process received credentials internally and pass them over ctrl_iface
+#	to external program(s)
+# Note: With wps_cred_processing=1, skip_cred_build should be set to 1 and
+# extra_cred be used to provide the Credential data for Enrollees.
+#
+# wps_cred_processing=1 will disabled automatic updates of hostapd.conf file
+# both for Credential processing and for marking AP Setup Locked based on
+# validation failures of AP PIN. An external program is responsible on updating
+# the configuration appropriately in this case.
+#wps_cred_processing=0
+
+# AP Settings Attributes for M7
+# By default, hostapd generates the AP Settings Attributes for M7 based on the
+# current configuration. It is possible to override this by providing a file
+# with pre-configured attributes. This is similar to extra_cred file format,
+# but the AP Settings attributes are not encapsulated in a Credential
+# attribute.
+#ap_settings=hostapd.ap_settings
+
+# WPS UPnP interface
+# If set, support for external Registrars is enabled.
+#upnp_iface=br0
+
+# Friendly Name (required for UPnP)
+# Short description for end use. Should be less than 64 characters.
+#friendly_name=WPS Access Point
+
+# Manufacturer URL (optional for UPnP)
+#manufacturer_url=http://www.example.com/
+
+# Model Description (recommended for UPnP)
+# Long description for end user. Should be less than 128 characters.
+#model_description=Wireless Access Point
+
+# Model URL (optional for UPnP)
+#model_url=http://www.example.com/model/
+
+# Universal Product Code (optional for UPnP)
+# 12-digit, all-numeric code that identifies the consumer package.
+#upc=123456789012
+
+##### Wi-Fi Direct (P2P) ######################################################
+
+# Enable P2P Device management
+#manage_p2p=1
+
+# Allow cross connection
+#allow_cross_connection=1
+
+#### TDLS (IEEE 802.11z-2010) #################################################
+
+# Prohibit use of TDLS in this BSS
+#tdls_prohibit=1
+
+# Prohibit use of TDLS Channel Switching in this BSS
+#tdls_prohibit_chan_switch=1
+
+##### IEEE 802.11v-2011 #######################################################
+
+# Time advertisement
+# 0 = disabled (default)
+# 2 = UTC time at which the TSF timer is 0
+#time_advertisement=2
+
+# Local time zone as specified in 8.3 of IEEE Std 1003.1-2004:
+# stdoffset[dst[offset][,start[/time],end[/time]]]
+#time_zone=EST5
+
+##### IEEE 802.11u-2011 #######################################################
+
+# Enable Interworking service
+#interworking=1
+
+# Access Network Type
+# 0 = Private network
+# 1 = Private network with guest access
+# 2 = Chargeable public network
+# 3 = Free public network
+# 4 = Personal device network
+# 5 = Emergency services only network
+# 14 = Test or experimental
+# 15 = Wildcard
+#access_network_type=0
+
+# Whether the network provides connectivity to the Internet
+# 0 = Unspecified
+# 1 = Network provides connectivity to the Internet
+#internet=1
+
+# Additional Step Required for Access
+# Note: This is only used with open network, i.e., ASRA shall ne set to 0 if
+# RSN is used.
+#asra=0
+
+# Emergency services reachable
+#esr=0
+
+# Unauthenticated emergency service accessible
+#uesa=0
+
+# Venue Info (optional)
+# The available values are defined in IEEE Std 802.11u-2011, 7.3.1.34.
+# Example values (group,type):
+# 0,0 = Unspecified
+# 1,7 = Convention Center
+# 1,13 = Coffee Shop
+# 2,0 = Unspecified Business
+# 7,1  Private Residence
+#venue_group=7
+#venue_type=1
+
+# Homogeneous ESS identifier (optional; dot11HESSID)
+# If set, this shall be identifical to one of the BSSIDs in the homogeneous
+# ESS and this shall be set to the same value across all BSSs in homogeneous
+# ESS.
+#hessid=02:03:04:05:06:07
+
+# Roaming Consortium List
+# Arbitrary number of Roaming Consortium OIs can be configured with each line
+# adding a new OI to the list. The first three entries are available through
+# Beacon and Probe Response frames. Any additional entry will be available only
+# through ANQP queries. Each OI is between 3 and 15 octets and is configured a
+# a hexstring.
+#roaming_consortium=021122
+#roaming_consortium=2233445566
+
+##### Multiple BSSID support ##################################################
+#
+# Above configuration is using the default interface (wlan#, or multi-SSID VLAN
+# interfaces). Other BSSIDs can be added by using separator 'bss' with
+# default interface name to be allocated for the data packets of the new BSS.
+#
+# hostapd will generate BSSID mask based on the BSSIDs that are
+# configured. hostapd will verify that dev_addr & MASK == dev_addr. If this is
+# not the case, the MAC address of the radio must be changed before starting
+# hostapd (ifconfig wlan0 hw ether <MAC addr>). If a BSSID is configured for
+# every secondary BSS, this limitation is not applied at hostapd and other
+# masks may be used if the driver supports them (e.g., swap the locally
+# administered bit)
+#
+# BSSIDs are assigned in order to each BSS, unless an explicit BSSID is
+# specified using the 'bssid' parameter.
+# If an explicit BSSID is specified, it must be chosen such that it:
+# - results in a valid MASK that covers it and the dev_addr
+# - is not the same as the MAC address of the radio
+# - is not the same as any other explicitly specified BSSID
+#
+# Please note that hostapd uses some of the values configured for the first BSS
+# as the defaults for the following BSSes. However, it is recommended that all
+# BSSes include explicit configuration of all relevant configuration items.
+#
+#bss=wlan0_0
+#ssid=test2
+# most of the above items can be used here (apart from radio interface specific
+# items, like channel)
+
+#bss=wlan0_1
+#bssid=00:13:10:95:fe:0b
+# ...
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/ipsec.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/ipsec.conf
new file mode 100644
index 000000000..294964fe7
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/ipsec.conf
@@ -0,0 +1,33 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn rw-allow
+	rightgroups=allow
+	leftsubnet=10.1.0.0/28
+	also=rw-eap
+	auto=add
+
+conn rw-isolate
+	rightgroups=isolate
+	leftsubnet=10.1.0.16/28
+	also=rw-eap
+	auto=add
+
+conn rw-eap
+	left=PH_IP_MOON
+	leftcert=moonCert.pem
+	leftid=@moon.strongswan.org
+	leftauth=pubkey
+	leftfirewall=yes
+	rightauth=eap-radius
+	rightid=*@strongswan.org
+	rightsendcert=never
+	right=%any
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/ipsec.secrets b/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/ipsec.secrets
new file mode 100644
index 000000000..e86d6aa5c
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/ipsec.secrets
@@ -0,0 +1,3 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+: RSA moonKey.pem
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/iptables.rules b/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/iptables.rules
new file mode 100644
index 000000000..1eb755354
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/iptables.rules
@@ -0,0 +1,32 @@
+*filter
+
+# default policy is DROP
+-P INPUT DROP
+-P OUTPUT DROP
+-P FORWARD DROP
+
+# allow esp
+-A INPUT  -i eth0 -p 50 -j ACCEPT
+-A OUTPUT -o eth0 -p 50 -j ACCEPT
+
+# allow IKE
+-A INPUT  -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
+-A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
+
+# allow MobIKE
+-A INPUT  -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
+-A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
+
+# allow ssh
+-A INPUT  -p tcp --dport 22 -j ACCEPT
+-A OUTPUT -p tcp --sport 22 -j ACCEPT
+
+# allow crl fetch from winnetou
+-A INPUT  -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
+-A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
+
+# allow RADIUS protocol with alice
+-A INPUT  -i eth1 -p udp --sport 1812 -s PH_IP_ALICE -j ACCEPT
+-A OUTPUT -o eth1 -p udp --dport 1812 -d PH_IP_ALICE -j ACCEPT
+
+COMMIT
diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/strongswan.conf
new file mode 100644
index 000000000..390c42ccf
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/strongswan.conf
@@ -0,0 +1,13 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-netlink socket-default eap-radius updown
+  multiple_authentication=no
+  plugins {
+    eap-radius {
+      secret = gv6URkSs 
+      server = PH_IP_ALICE
+      filter_id = yes
+    }
+  }
+}
diff --git a/testing/tests/tnc/tnccs-11-supplicant/posttest.dat b/testing/tests/tnc/tnccs-11-supplicant/posttest.dat
new file mode 100644
index 000000000..b55e0457c
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/posttest.dat
@@ -0,0 +1,5 @@
+carol::killall wpa_supplicant
+dave::killall wpa_supplicant
+moon::killall hostapd
+alice::killall radiusd
+alice::rm /etc/freeradius/sites-enabled/inner-tunnel-second
diff --git a/testing/tests/tnc/tnccs-11-supplicant/pretest.dat b/testing/tests/tnc/tnccs-11-supplicant/pretest.dat
new file mode 100644
index 000000000..ac03fedbb
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/pretest.dat
@@ -0,0 +1,11 @@
+alice::ln -s /etc/freeradius/sites-available/inner-tunnel-second /etc/freeradius/sites-enabled/inner-tunnel-second
+alice::cat /etc/freeradius/sites-enabled/inner-tunnel-second
+alice::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties radiusd
+alice::cat /etc/tnc_config
+carol::cat /etc/tnc_config
+dave::cat /etc/tnc_config
+moon::hostapd -B /etc/hostapd/hostapd.conf
+carol::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties wpa_supplicant -B -c /etc/wpa_supplicant.conf -D wired -i eth0
+carol::sleep 4  
+dave::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties wpa_supplicant -B -c /etc/wpa_supplicant.conf -D wired -i eth0
+dave::sleep 4
diff --git a/testing/tests/tnc/tnccs-11-supplicant/test.conf b/testing/tests/tnc/tnccs-11-supplicant/test.conf
new file mode 100644
index 000000000..f23a19329
--- /dev/null
+++ b/testing/tests/tnc/tnccs-11-supplicant/test.conf
@@ -0,0 +1,26 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# guest instances used for this test
+
+# All guest instances that are required for this test
+#
+VIRTHOSTS="alice venus moon carol winnetou dave"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-v-m-c-w-d.png"
+
+# Guest instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="moon"
+
+# Guest instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon carol dave"
+
+# Guest instances on which FreeRadius is started
+#
+RADIUSHOSTS="alice"
+