1 files changed, 281 insertions, 0 deletions
diff --git a/conf/options/charon.conf b/conf/options/charon.conf
new file mode 100644
index 000000000..5cab2b1c4
--- /dev/null
+++ b/conf/options/charon.conf
@@ -0,0 +1,281 @@
+# Options for the charon IKE daemon.
+charon {
+
+    # Maximum number of half-open IKE_SAs for a single peer IP.
+    # block_threshold = 5
+
+    # Whether relations in validated certificate chains should be cached in
+    # memory.
+    # cert_cache = yes
+
+    # Send Cisco Unity vendor ID payload (IKEv1 only).
+    # cisco_unity = no
+
+    # Close the IKE_SA if setup of the CHILD_SA along with IKE_AUTH failed.
+    # close_ike_on_child_failure = no
+
+    # Number of half-open IKE_SAs that activate the cookie mechanism.
+    # cookie_threshold = 10
+
+    # Use ANSI X9.42 DH exponent size or optimum size matched to cryptographic
+    # strength.
+    # dh_exponent_ansi_x9_42 = yes
+
+    # DNS server assigned to peer via configuration payload (CP).
+    # dns1 =
+
+    # DNS server assigned to peer via configuration payload (CP).
+    # dns2 =
+
+    # Enable Denial of Service protection using cookies and aggressiveness
+    # checks.
+    # dos_protection = yes
+
+    # Compliance with the errata for RFC 4753.
+    # ecp_x_coordinate_only = yes
+
+    # Free objects during authentication (might conflict with plugins).
+    # flush_auth_cfg = no
+
+    # Maximum size (in bytes) of a sent fragment when using the proprietary
+    # IKEv1 fragmentation extension.
+    # fragment_size = 512
+
+    # Name of the group the daemon changes to after startup.
+    # group =
+
+    # Timeout in seconds for connecting IKE_SAs (also see IKE_SA_INIT DROPPING).
+    # half_open_timeout = 30
+
+    # Enable hash and URL support.
+    # hash_and_url = no
+
+    # Allow IKEv1 Aggressive Mode with pre-shared keys as responder.
+    # i_dont_care_about_security_and_use_aggressive_mode_psk = no
+
+    # A space-separated list of routing tables to be excluded from route
+    # lookups.
+    # ignore_routing_tables =
+
+    # Maximum number of IKE_SAs that can be established at the same time before
+    # new connection attempts are blocked.
+    # ikesa_limit = 0
+
+    # Number of exclusively locked segments in the hash table.
+    # ikesa_table_segments = 1
+
+    # Size of the IKE_SA hash table.
+    # ikesa_table_size = 1
+
+    # Whether to close IKE_SA if the only CHILD_SA closed due to inactivity.
+    # inactivity_close_ike = no
+
+    # Limit new connections based on the current number of half open IKE_SAs,
+    # see IKE_SA_INIT DROPPING in strongswan.conf(5).
+    # init_limit_half_open = 0
+
+    # Limit new connections based on the number of queued jobs.
+    # init_limit_job_load = 0
+
+    # Causes charon daemon to ignore IKE initiation requests.
+    # initiator_only = no
+
+    # Install routes into a separate routing table for established IPsec
+    # tunnels.
+    # install_routes = yes
+
+    # Install virtual IP addresses.
+    # install_virtual_ip = yes
+
+    # The name of the interface on which virtual IP addresses should be
+    # installed.
+    # install_virtual_ip_on =
+
+    # Check daemon, libstrongswan and plugin integrity at startup.
+    # integrity_test = no
+
+    # A comma-separated list of network interfaces that should be ignored, if
+    # interfaces_use is specified this option has no effect.
+    # interfaces_ignore =
+
+    # A comma-separated list of network interfaces that should be used by
+    # charon. All other interfaces are ignored.
+    # interfaces_use =
+
+    # NAT keep alive interval.
+    # keep_alive = 20s
+
+    # Plugins to load in the IKE daemon charon.
+    # load =
+
+    # Determine plugins to load via each plugin's load option.
+    # load_modular = no
+
+    # Maximum packet size accepted by charon.
+    # max_packet = 10000
+
+    # Enable multiple authentication exchanges (RFC 4739).
+    # multiple_authentication = yes
+
+    # WINS servers assigned to peer via configuration payload (CP).
+    # nbns1 =
+
+    # WINS servers assigned to peer via configuration payload (CP).
+    # nbns2 =
+
+    # UDP port used locally. If set to 0 a random port will be allocated.
+    # port = 500
+
+    # UDP port used locally in case of NAT-T. If set to 0 a random port will be
+    # allocated.  Has to be different from charon.port, otherwise a random port
+    # will be allocated.
+    # port_nat_t = 4500
+
+    # Process RTM_NEWROUTE and RTM_DELROUTE events.
+    # process_route = yes
+
+    # Delay in ms for receiving packets, to simulate larger RTT.
+    # receive_delay = 0
+
+    # Delay request messages.
+    # receive_delay_request = yes
+
+    # Delay response messages.
+    # receive_delay_response = yes
+
+    # Specific IKEv2 message type to delay, 0 for any.
+    # receive_delay_type = 0
+
+    # Size of the AH/ESP replay window, in packets.
+    # replay_window = 32
+
+    # Base to use for calculating exponential back off, see IKEv2 RETRANSMISSION
+    # in strongswan.conf(5).
+    # retransmit_base = 1.8
+
+    # Timeout in seconds before sending first retransmit.
+    # retransmit_timeout = 4.0
+
+    # Number of times to retransmit a packet before giving up.
+    # retransmit_tries = 5
+
+    # Interval to use when retrying to initiate an IKE_SA (e.g. if DNS
+    # resolution failed), 0 to disable retries.
+    # retry_initiate_interval = 0
+
+    # Initiate CHILD_SA within existing IKE_SAs.
+    # reuse_ikesa = yes
+
+    # Numerical routing table to install routes to.
+    # routing_table =
+
+    # Priority of the routing table.
+    # routing_table_prio =
+
+    # Delay in ms for sending packets, to simulate larger RTT.
+    # send_delay = 0
+
+    # Delay request messages.
+    # send_delay_request = yes
+
+    # Delay response messages.
+    # send_delay_response = yes
+
+    # Specific IKEv2 message type to delay, 0 for any.
+    # send_delay_type = 0
+
+    # Send strongSwan vendor ID payload
+    # send_vendor_id = no
+
+    # Number of worker threads in charon.
+    # threads = 16
+
+    # Name of the user the daemon changes to after startup.
+    # user =
+
+    crypto_test {
+
+        # Benchmark crypto algorithms and order them by efficiency.
+        # bench = no
+
+        # Buffer size used for crypto benchmark.
+        # bench_size = 1024
+
+        # Number of iterations to test each algorithm.
+        # bench_time = 50
+
+        # Test crypto algorithms during registration (requires test vectors
+        # provided by the test-vectors plugin).
+        # on_add = no
+
+        # Test crypto algorithms on each crypto primitive instantiation.
+        # on_create = no
+
+        # Strictly require at least one test vector to enable an algorithm.
+        # required = no
+
+        # Whether to test RNG with TRUE quality; requires a lot of entropy.
+        # rng_true = no
+
+    }
+
+    host_resolver {
+
+        # Maximum number of concurrent resolver threads (they are terminated if
+        # unused).
+        # max_threads = 3
+
+        # Minimum number of resolver threads to keep around.
+        # min_threads = 0
+
+    }
+
+    leak_detective {
+
+        # Includes source file names and line numbers in leak detective output.
+        # detailed = yes
+
+        # Threshold in bytes for leaks to be reported (0 to report all).
+        # usage_threshold = 10240
+
+        # Threshold in number of allocations for leaks to be reported (0 to
+        # report all).
+        # usage_threshold_count = 0
+
+    }
+
+    processor {
+
+        # Section to configure the number of reserved threads per priority class
+        # see JOB PRIORITY MANAGEMENT in strongswan.conf(5).
+        priority_threads {
+
+        }
+
+    }
+
+    tls {
+
+        # List of TLS encryption ciphers.
+        # cipher =
+
+        # List of TLS key exchange methods.
+        # key_exchange =
+
+        # List of TLS MAC algorithms.
+        # mac =
+
+        # List of TLS cipher suites.
+        # suites =
+
+    }
+
+    x509 {
+
+        # Discard certificates with unsupported or unknown critical extensions.
+        # enforce_critical = yes
+
+    }
+
+}
+