diff options
Diffstat (limited to 'install-sh')
| -rwxr-xr-x | install-sh | 373 |
1 files changed, 177 insertions, 196 deletions
diff --git a/install-sh b/install-sh index 377bb8687..59990a104 100755 --- a/install-sh +++ b/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2011-11-20.07; # UTC +scriptversion=2014-09-12.12; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -41,19 +41,15 @@ scriptversion=2011-11-20.07; # UTC # This script is compatible with the BSD install script, but was written # from scratch. +tab=' ' nl=' ' -IFS=" "" $nl" +IFS=" $tab$nl" -# set DOITPROG to echo to test this script +# Set DOITPROG to "echo" to test this script. -# Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi +doit_exec=${doit:-exec} # Put in absolute file names if you don't have them in your path; # or use environment vars. @@ -68,17 +64,6 @@ mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - posix_mkdir= # Desired mode of installed file. @@ -97,7 +82,7 @@ dir_arg= dst_arg= copy_on_change=false -no_target_directory= +is_target_a_directory=possibly usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE @@ -137,46 +122,57 @@ while test $# -ne 0; do -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" - shift;; + shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; -o) chowncmd="$chownprog $2" - shift;; + shift;; -s) stripcmd=$stripprog;; - -t) dst_arg=$2 - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - shift;; + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; - -T) no_target_directory=true;; + -T) is_target_a_directory=never;; --version) echo "$0 $scriptversion"; exit $?;; - --) shift - break;; + --) shift + break;; - -*) echo "$0: invalid option: $1" >&2 - exit 1;; + -*) echo "$0: invalid option: $1" >&2 + exit 1;; *) break;; esac shift done +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. + +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi + if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. @@ -208,6 +204,15 @@ if test $# -eq 0; then fi if test -z "$dir_arg"; then + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi + +if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 @@ -223,16 +228,16 @@ if test -z "$dir_arg"; then *[0-7]) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw='% 200' + u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw=,u+rw + u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac @@ -269,41 +274,15 @@ do # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - + dstdir=`dirname "$dst"` test -d "$dstdir" dstdir_status=$? fi @@ -314,74 +293,81 @@ do if test $dstdir_status != 0; then case $posix_mkdir in '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + # $RANDOM is not portable (e.g. dash); use it when possible to + # lower collision chance + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 + + # As "mkdir -p" follows symlinks and we work in /tmp possibly; so + # create the $tmpdir first (and fail if unsuccessful) to make sure + # that nobody tries to guess the $tmpdir name. + if (umask $mkdir_umask && + $mkdirprog $mkdir_mode "$tmpdir" && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + test_tmpdir="$tmpdir/a" + ls_ld_tmpdir=`ls -ld "$test_tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null + fi + trap '' 0;; + esac;; esac if $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else @@ -391,53 +377,51 @@ do # directory the slow way, step by step, checking for races as we go. case $dstdir in - /*) prefix='/';; - [-=\(\)!]*) prefix='./';; - *) prefix='';; + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; esac - eval "$initialize_posix_glob" - oIFS=$IFS IFS=/ - $posix_glob set -f + set -f set fnord $dstdir shift - $posix_glob set +f + set +f IFS=$oIFS prefixes= for d do - test X"$d" = X && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ done if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi fi fi @@ -472,15 +456,12 @@ do # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - + set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then @@ -493,24 +474,24 @@ do # to itself, or perhaps because mv is so ancient that it does not # support -f. { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 |