diff options
Diffstat (limited to 'src/pluto/Makefile.in')
| -rw-r--r-- | src/pluto/Makefile.in | 286 |
1 files changed, 236 insertions, 50 deletions
diff --git a/src/pluto/Makefile.in b/src/pluto/Makefile.in index 47be9acf7..41fc4927e 100644 --- a/src/pluto/Makefile.in +++ b/src/pluto/Makefile.in @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -40,6 +40,9 @@ build_triplet = @build@ host_triplet = @host@ ipsec_PROGRAMS = pluto$(EXEEXT) _pluto_adns$(EXEEXT) +# compile options +################# + # This compile option activates the sending of a strongSwan VID @USE_VENDORID_TRUE@am__append_1 = -DVENDORID @@ -54,8 +57,9 @@ ipsec_PROGRAMS = pluto$(EXEEXT) _pluto_adns$(EXEEXT) # This compile option activates smartcard support @USE_SMARTCARD_TRUE@am__append_5 = -DSMARTCARD -@USE_CAPABILITIES_TRUE@am__append_6 = -lcap +@USE_LIBCAP_TRUE@am__append_6 = -lcap @USE_THREADS_TRUE@am__append_7 = -DTHREADS +@USE_XAUTH_TRUE@am__append_8 = plugins/xauth subdir = src/pluto DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in @@ -91,11 +95,11 @@ am_pluto_OBJECTS = ac.$(OBJEXT) alg_info.$(OBJEXT) ca.$(OBJEXT) \ kernel_noklips.$(OBJEXT) kernel_pfkey.$(OBJEXT) keys.$(OBJEXT) \ lex.$(OBJEXT) log.$(OBJEXT) myid.$(OBJEXT) modecfg.$(OBJEXT) \ nat_traversal.$(OBJEXT) ocsp.$(OBJEXT) packet.$(OBJEXT) \ - pkcs7.$(OBJEXT) plutomain.$(OBJEXT) rcv_whack.$(OBJEXT) \ - server.$(OBJEXT) smartcard.$(OBJEXT) spdb.$(OBJEXT) \ - state.$(OBJEXT) timer.$(OBJEXT) vendor.$(OBJEXT) \ - virtual.$(OBJEXT) whack_attribute.$(OBJEXT) xauth.$(OBJEXT) \ - x509.$(OBJEXT) builder.$(OBJEXT) + pkcs7.$(OBJEXT) pluto.$(OBJEXT) plutomain.$(OBJEXT) \ + rcv_whack.$(OBJEXT) server.$(OBJEXT) smartcard.$(OBJEXT) \ + spdb.$(OBJEXT) state.$(OBJEXT) timer.$(OBJEXT) \ + vendor.$(OBJEXT) virtual.$(OBJEXT) whack_attribute.$(OBJEXT) \ + xauth_manager.$(OBJEXT) x509.$(OBJEXT) builder.$(OBJEXT) pluto_OBJECTS = $(am_pluto_OBJECTS) pluto_DEPENDENCIES = $(LIBSTRONGSWANDIR)/libstrongswan.la \ $(LIBFREESWANDIR)/libfreeswan.a $(LIBHYDRADIR)/libhydra.la \ @@ -116,6 +120,13 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(_pluto_adns_SOURCES) $(pluto_SOURCES) DIST_SOURCES = $(_pluto_adns_SOURCES) $(pluto_SOURCES) +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ @@ -141,9 +152,40 @@ man5dir = $(mandir)/man5 man8dir = $(mandir)/man8 NROFF = nroff MANS = $(dist_man_MANS) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir ETAGS = etags CTAGS = ctags +DIST_SUBDIRS = . plugins/xauth DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALLOCA = @ALLOCA@ AMTAR = @AMTAR@ @@ -332,6 +374,7 @@ nat_traversal.c nat_traversal.h \ ocsp.c ocsp.h \ packet.c packet.h \ pkcs7.c pkcs7.h \ +pluto.c pluto.h \ plutomain.c \ rcv_whack.c rcv_whack.h \ server.c server.h \ @@ -342,7 +385,8 @@ timer.c timer.h \ vendor.c vendor.h \ virtual.c virtual.h \ whack_attribute.c whack_attribute.h \ -xauth.c xauth.h \ +xauth/xauth_manager.c xauth/xauth_manager.h \ +xauth/xauth_provider.h xauth/xauth_verifier.h \ x509.c x509.h \ builder.c builder.h \ rsaref/pkcs11t.h rsaref/pkcs11.h rsaref/unix.h rsaref/pkcs11f.h @@ -358,10 +402,10 @@ INCLUDES = \ -I$(top_srcdir)/src/libhydra \ -I$(top_srcdir)/src/whack -AM_CFLAGS = -DIPSEC_DIR=\"${ipsecdir}\" \ +AM_CFLAGS = -rdynamic -DIPSEC_DIR=\"${ipsecdir}\" \ -DIPSEC_CONFDIR=\"${sysconfdir}\" -DIPSEC_PIDDIR=\"${piddir}\" \ -DSHARED_SECRETS_FILE=\"${sysconfdir}/ipsec.secrets\" \ - -DPLUGINS=\""${pluto_plugins}\"" \ + -DPLUGINS=\""${pluto_plugins} ${libhydra_plugins}\"" \ -DPKCS11_DEFAULT_LIB=\"${default_pkcs11}\" -DKERNEL26_SUPPORT \ -DKERNEL26_HAS_KAME_DUPLICATES -DPLUTO -DKLIPS -DDEBUG \ $(am__append_1) $(am__append_2) $(am__append_3) \ @@ -373,8 +417,14 @@ _pluto_adns_LDADD = \ $(LIBFREESWANDIR)/libfreeswan.a \ -lresolv $(DLLIB) +CLEANFILES = ipsec.secrets.5 dist_man_MANS = pluto.8 ipsec.secrets.5 -all: all-am +EXTRA_DIST = ipsec.secrets.5.in + +# build optional plugins +######################## +SUBDIRS = . $(am__append_8) +all: all-recursive .SUFFIXES: .SUFFIXES: .c .lo .o .obj @@ -497,6 +547,7 @@ distclean-compile: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ocsp.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/packet.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkcs7.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pluto.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/plutomain.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rcv_whack.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server.Po@am__quote@ @@ -508,7 +559,7 @@ distclean-compile: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/virtual.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/whack_attribute.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x509.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xauth.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xauth_manager.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @@ -531,6 +582,20 @@ distclean-compile: @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +xauth_manager.o: xauth/xauth_manager.c +@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xauth_manager.o -MD -MP -MF $(DEPDIR)/xauth_manager.Tpo -c -o xauth_manager.o `test -f 'xauth/xauth_manager.c' || echo '$(srcdir)/'`xauth/xauth_manager.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xauth_manager.Tpo $(DEPDIR)/xauth_manager.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='xauth/xauth_manager.c' object='xauth_manager.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xauth_manager.o `test -f 'xauth/xauth_manager.c' || echo '$(srcdir)/'`xauth/xauth_manager.c + +xauth_manager.obj: xauth/xauth_manager.c +@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT xauth_manager.obj -MD -MP -MF $(DEPDIR)/xauth_manager.Tpo -c -o xauth_manager.obj `if test -f 'xauth/xauth_manager.c'; then $(CYGPATH_W) 'xauth/xauth_manager.c'; else $(CYGPATH_W) '$(srcdir)/xauth/xauth_manager.c'; fi` +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/xauth_manager.Tpo $(DEPDIR)/xauth_manager.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='xauth/xauth_manager.c' object='xauth_manager.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o xauth_manager.obj `if test -f 'xauth/xauth_manager.c'; then $(CYGPATH_W) 'xauth/xauth_manager.c'; else $(CYGPATH_W) '$(srcdir)/xauth/xauth_manager.c'; fi` + mostlyclean-libtool: -rm -f *.lo @@ -613,6 +678,76 @@ uninstall-man8: echo " ( cd '$(DESTDIR)$(man8dir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(man8dir)" && rm -f $$files; } +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -623,10 +758,23 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) mkid -fID $$unique tags: TAGS -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ @@ -645,7 +793,7 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ fi; \ fi ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -708,22 +856,51 @@ distdir: $(DISTFILES) || exit 1; \ fi; \ done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done check-am: all-am -check: check-am +check: check-recursive all-am: Makefile $(PROGRAMS) $(MANS) -installdirs: +installdirs: installdirs-recursive +installdirs-am: for dir in "$(DESTDIR)$(ipsecdir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am -installcheck: installcheck-am +installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ @@ -732,6 +909,7 @@ install-strip: mostlyclean-generic: clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) @@ -740,72 +918,72 @@ distclean-generic: maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -clean: clean-am +clean: clean-recursive clean-am: clean-generic clean-ipsecPROGRAMS clean-libtool \ mostlyclean-am -distclean: distclean-am +distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags -dvi: dvi-am +dvi: dvi-recursive dvi-am: -html: html-am +html: html-recursive html-am: -info: info-am +info: info-recursive info-am: install-data-am: install-ipsecPROGRAMS install-man -install-dvi: install-dvi-am +install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: -install-html: install-html-am +install-html: install-html-recursive install-html-am: -install-info: install-info-am +install-info: install-info-recursive install-info-am: install-man: install-man5 install-man8 -install-pdf: install-pdf-am +install-pdf: install-pdf-recursive install-pdf-am: -install-ps: install-ps-am +install-ps: install-ps-recursive install-ps-am: installcheck-am: -maintainer-clean: maintainer-clean-am +maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic -mostlyclean: mostlyclean-am +mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool -pdf: pdf-am +pdf: pdf-recursive pdf-am: -ps: ps-am +ps: ps-recursive ps-am: @@ -813,27 +991,35 @@ uninstall-am: uninstall-ipsecPROGRAMS uninstall-man uninstall-man: uninstall-man5 uninstall-man8 -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-ipsecPROGRAMS clean-libtool ctags distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am \ - install-ipsecPROGRAMS install-man install-man5 install-man8 \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - pdf pdf-am ps ps-am tags uninstall uninstall-am \ +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ + install-am install-strip tags-recursive + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic \ + clean-ipsecPROGRAMS clean-libtool ctags ctags-recursive \ + distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-ipsecPROGRAMS install-man install-man5 \ + install-man8 install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags tags-recursive uninstall uninstall-am \ uninstall-ipsecPROGRAMS uninstall-man uninstall-man5 \ uninstall-man8 plutomain.o : $(top_builddir)/config.status +ipsec.secrets.5 : ipsec.secrets.5.in + sed \ + -e "s:@IPSEC_VERSION@:$(PACKAGE_VERSION):" \ + $(srcdir)/$@.in > $@ + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: |