diff options
Diffstat (limited to 'testing/scripts/recipes')
| -rw-r--r-- | testing/scripts/recipes/001_libtnc.mk | 31 | ||||
| -rw-r--r-- | testing/scripts/recipes/002_tnc-fhh.mk | 28 | ||||
| -rw-r--r-- | testing/scripts/recipes/003_freeradius.mk | 44 | ||||
| -rw-r--r-- | testing/scripts/recipes/004_iptables.mk | 37 | ||||
| -rw-r--r-- | testing/scripts/recipes/005_strongswan.mk | 87 | ||||
| -rw-r--r-- | testing/scripts/recipes/patches/freeradius-avp-size | 18 | ||||
| -rw-r--r-- | testing/scripts/recipes/patches/freeradius-eap-sim-identity | 30 | ||||
| -rw-r--r-- | testing/scripts/recipes/patches/freeradius-tnc-fhh | 6687 | ||||
| -rw-r--r-- | testing/scripts/recipes/patches/iptables-xfrm-hooks | 61 |
9 files changed, 7023 insertions, 0 deletions
diff --git a/testing/scripts/recipes/001_libtnc.mk b/testing/scripts/recipes/001_libtnc.mk new file mode 100644 index 000000000..b835958b7 --- /dev/null +++ b/testing/scripts/recipes/001_libtnc.mk @@ -0,0 +1,31 @@ +#!/usr/bin/make + +PV = 1.25 +PKG = libtnc-$(PV) +TAR = $(PKG).tar.gz +SRC = http://downloads.sourceforge.net/project/libtnc/libtnc/$(PV)/$(TAR) + +NUM_CPUS := $(shell getconf _NPROCESSORS_ONLN) + +CONFIG_OPTS = \ + --sysconfdir=/etc + +all: install + +$(TAR): + wget $(SRC) + +.$(PKG)-unpacked: $(TAR) + tar xfz $(TAR) + @touch $@ + +.$(PKG)-configured: .$(PKG)-unpacked + cd $(PKG) && ./configure $(CONFIG_OPTS) + @touch $@ + +.$(PKG)-built: .$(PKG)-configured + cd $(PKG) && make -j $(NUM_CPUS) + @touch $@ + +install: .$(PKG)-built + cd $(PKG) && make install diff --git a/testing/scripts/recipes/002_tnc-fhh.mk b/testing/scripts/recipes/002_tnc-fhh.mk new file mode 100644 index 000000000..397cef950 --- /dev/null +++ b/testing/scripts/recipes/002_tnc-fhh.mk @@ -0,0 +1,28 @@ +#!/usr/bin/make + +PKG = fhhtnc +SRC = git://github.com/trustatfhh/tnc-fhh.git + +NUM_CPUS := $(shell getconf _NPROCESSORS_ONLN) + +CONFIG_OPTS = \ + -DCOMPONENT=all \ + -DNAL=8021x + +all: install + +.$(PKG)-cloned: + git clone $(SRC) $(PKG) + mkdir $(PKG)/build + @touch $@ + +.$(PKG)-configured: .$(PKG)-cloned + cd $(PKG)/build && cmake $(CONFIG_OPTS) ../ + @touch $@ + +.$(PKG)-built: .$(PKG)-configured + cd $(PKG)/build && make -j $(NUM_CPUS) + @touch $@ + +install: .$(PKG)-built + cd $(PKG)/build && make install diff --git a/testing/scripts/recipes/003_freeradius.mk b/testing/scripts/recipes/003_freeradius.mk new file mode 100644 index 000000000..7b7a5fe82 --- /dev/null +++ b/testing/scripts/recipes/003_freeradius.mk @@ -0,0 +1,44 @@ +#!/usr/bin/make + +PV = 2.2.0 +PKG = freeradius-server-$(PV) +TAR = $(PKG).tar.bz2 +SRC = ftp://ftp.freeradius.org/pub/freeradius/$(TAR) + +NUM_CPUS := $(shell getconf _NPROCESSORS_ONLN) + +CONFIG_OPTS = \ + --with-raddbdir=/etc/freeradius \ + --sysconfdir=/etc \ + --with-logdir=/var/log/freeradius \ + --enable-developer \ + --with-experimental-modules + +PATCHES = \ + freeradius-eap-sim-identity \ + freeradius-avp-size \ + freeradius-tnc-fhh + +all: install + +$(TAR): + wget $(SRC) + +.$(PKG)-unpacked: $(TAR) + tar xfj $(TAR) + @touch $@ + +.$(PKG)-patches-applied: .$(PKG)-unpacked + cd $(PKG) && cat $(addprefix ../patches/, $(PATCHES)) | patch -p1 + @touch $@ + +.$(PKG)-configured: .$(PKG)-patches-applied + cd $(PKG) && ./configure $(CONFIG_OPTS) + @touch $@ + +.$(PKG)-built: .$(PKG)-configured + cd $(PKG) && make -j $(NUM_CPUS) + @touch $@ + +install: .$(PKG)-built + cd $(PKG) && make install diff --git a/testing/scripts/recipes/004_iptables.mk b/testing/scripts/recipes/004_iptables.mk new file mode 100644 index 000000000..51200201a --- /dev/null +++ b/testing/scripts/recipes/004_iptables.mk @@ -0,0 +1,37 @@ +#!/usr/bin/make + +PV = 1.4.16.3 +PKG = iptables-$(PV) +TAR = $(PKG).tar.bz2 +SRC = http://www.netfilter.org/projects/iptables/files/$(TAR) + +NUM_CPUS := $(shell getconf _NPROCESSORS_ONLN) + +CONFIG_OPTS = + +PATCHES = \ + iptables-xfrm-hooks + +all: install + +$(TAR): + wget $(SRC) + +.$(PKG)-unpacked: $(TAR) + tar xfj $(TAR) + @touch $@ + +.$(PKG)-patches-applied: .$(PKG)-unpacked + cd $(PKG) && cat $(addprefix ../patches/, $(PATCHES)) | patch -p1 + @touch $@ + +.$(PKG)-configured: .$(PKG)-patches-applied + cd $(PKG) && ./configure $(CONFIG_OPTS) + @touch $@ + +.$(PKG)-built: .$(PKG)-configured + cd $(PKG) && make -j $(NUM_CPUS) + @touch $@ + +install: .$(PKG)-built + cd $(PKG) && make install diff --git a/testing/scripts/recipes/005_strongswan.mk b/testing/scripts/recipes/005_strongswan.mk new file mode 100644 index 000000000..76d2d0882 --- /dev/null +++ b/testing/scripts/recipes/005_strongswan.mk @@ -0,0 +1,87 @@ +#!/usr/bin/make + +PV = $(SWANVERSION) +PKG = strongswan-$(PV) +TAR = $(PKG).tar.bz2 +SRC = http://download.strongswan.org/$(TAR) + +NUM_CPUS := $(shell getconf _NPROCESSORS_ONLN) + +CONFIG_OPTS = \ + --sysconfdir=/etc \ + --with-random-device=/dev/urandom \ + --disable-load-warning \ + --enable-curl \ + --enable-ldap \ + --enable-eap-aka \ + --enable-eap-aka-3gpp2 \ + --enable-eap-sim \ + --enable-eap-sim-file \ + --enable-eap-md5 \ + --enable-md4 \ + --enable-eap-mschapv2 \ + --enable-eap-identity \ + --enable-eap-radius \ + --enable-eap-dynamic \ + --enable-eap-tls \ + --enable-eap-ttls \ + --enable-eap-peap \ + --enable-eap-tnc \ + --enable-tnc-pdp \ + --enable-tnc-imc \ + --enable-tnc-imv \ + --enable-tnccs-11 \ + --enable-tnccs-20 \ + --enable-tnccs-dynamic \ + --enable-imc-test \ + --enable-imv-test \ + --enable-imc-scanner \ + --enable-imv-scanner \ + --enable-imc-os \ + --enable-imv-os \ + --enable-imc-attestation \ + --enable-imv-attestation \ + --enable-sql \ + --enable-sqlite \ + --enable-mediation \ + --enable-openssl \ + --enable-blowfish \ + --enable-kernel-pfkey \ + --enable-integrity-test \ + --enable-leak-detective \ + --enable-load-tester \ + --enable-test-vectors \ + --enable-gcrypt \ + --enable-socket-default \ + --enable-socket-dynamic \ + --enable-dhcp \ + --enable-farp \ + --enable-addrblock \ + --enable-ctr \ + --enable-ccm \ + --enable-gcm \ + --enable-cmac \ + --enable-ha \ + --enable-af-alg \ + --enable-whitelist \ + --enable-xauth-generic \ + --enable-xauth-eap \ + --enable-pkcs8 \ + --enable-unity + +all: install + +$(TAR): + wget $(SRC) + +$(PKG): $(TAR) + tar xfj $(TAR) + +configure: $(PKG) + cd $(PKG) && ./configure $(CONFIG_OPTS) + +build: configure + cd $(PKG) && make -j $(NUM_CPUS) + +install: build + cd $(PKG) && make install diff --git a/testing/scripts/recipes/patches/freeradius-avp-size b/testing/scripts/recipes/patches/freeradius-avp-size new file mode 100644 index 000000000..e7e1f635b --- /dev/null +++ b/testing/scripts/recipes/patches/freeradius-avp-size @@ -0,0 +1,18 @@ +diff --git a/src/modules/rlm_eap/types/rlm_eap_ttls/ttls.c b/src/modules/rlm_eap/types/rlm_eap_ttls/ttls.c +index 6c9bd13..3344c53 100644 +--- a/src/modules/rlm_eap/types/rlm_eap_ttls/ttls.c ++++ b/src/modules/rlm_eap/types/rlm_eap_ttls/ttls.c +@@ -201,8 +201,11 @@ static VALUE_PAIR *diameter2vp(REQUEST *request, SSL *ssl, + goto next_attr; + } + +- if (size > 253) { +- RDEBUG2("WARNING: diameter2vp skipping long attribute %u, attr"); ++ /* ++ * EAP-Message AVPs can be larger than 253 octets. ++ */ ++ if ((size > 253) && !((VENDOR(attr) == 0) && (attr == PW_EAP_MESSAGE))) { ++ RDEBUG2("WARNING: diameter2vp skipping long attribute %u", attr); + goto next_attr; + } + diff --git a/testing/scripts/recipes/patches/freeradius-eap-sim-identity b/testing/scripts/recipes/patches/freeradius-eap-sim-identity new file mode 100644 index 000000000..1ab95ecc6 --- /dev/null +++ b/testing/scripts/recipes/patches/freeradius-eap-sim-identity @@ -0,0 +1,30 @@ +--- a/src/modules/rlm_eap/types/rlm_eap_sim/rlm_eap_sim.c 2012-11-28 11:03:05.081225276 +0100 ++++ b/src/modules/rlm_eap/types/rlm_eap_sim/rlm_eap_sim.c 2012-11-28 11:46:59.746289881 +0100 +@@ -246,14 +246,21 @@ + newvp->vp_integer = ess->sim_id++; + pairreplace(outvps, newvp); + ++ ess->keys.identitylen = strlen(handler->identity); ++ memcpy(ess->keys.identity, handler->identity, ess->keys.identitylen); ++ + /* make a copy of the identity */ + newvp = pairfind(*invps, ATTRIBUTE_EAP_SIM_BASE + PW_EAP_SIM_IDENTITY); +- if (newvp) { +- ess->keys.identitylen = newvp->length; +- memcpy(ess->keys.identity, newvp->vp_octets, newvp->length); +- } else { +- ess->keys.identitylen = strlen(handler->identity); +- memcpy(ess->keys.identity, handler->identity, ess->keys.identitylen); ++ if (newvp && newvp->length > 2) { ++ uint16_t len; ++ ++ memcpy(&len, newvp->vp_octets, sizeof(uint16_t)); ++ len = ntohs(len); ++ if (len <= newvp->length - 2 && len <= MAX_STRING_LEN) { ++ ess->keys.identitylen = len; ++ memcpy(ess->keys.identity, newvp->vp_octets + 2, ++ ess->keys.identitylen); ++ } + } + + /* all set, calculate keys! */ diff --git a/testing/scripts/recipes/patches/freeradius-tnc-fhh b/testing/scripts/recipes/patches/freeradius-tnc-fhh new file mode 100644 index 000000000..5abc6b25f --- /dev/null +++ b/testing/scripts/recipes/patches/freeradius-tnc-fhh @@ -0,0 +1,6687 @@ +diff -u -r -N freeradius-server-2.2.0.orig/share/dictionary freeradius-server-2.2.0/share/dictionary +--- freeradius-server-2.2.0.orig/share/dictionary 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/share/dictionary 2012-12-04 19:39:42.261423097 +0100 +@@ -196,6 +196,7 @@ + $INCLUDE dictionary.starent + $INCLUDE dictionary.symbol + $INCLUDE dictionary.telebit ++$INCLUDE dictionary.tncfhh + $INCLUDE dictionary.terena + $INCLUDE dictionary.trapeze + $INCLUDE dictionary.tropos +diff -u -r -N freeradius-server-2.2.0.orig/share/dictionary.tncfhh freeradius-server-2.2.0/share/dictionary.tncfhh +--- freeradius-server-2.2.0.orig/share/dictionary.tncfhh 1970-01-01 01:00:00.000000000 +0100 ++++ freeradius-server-2.2.0/share/dictionary.tncfhh 2012-12-04 19:39:49.645421869 +0100 +@@ -0,0 +1,20 @@ ++# -*- text -*- ++# Dictionary for the tnc@fhh Server. ++# ++# Website: http://trust.inform.fh-hannover.de ++# ++# Version: 0.8.4 ++# Author: Bastian Hellmann ++# Email: trust@f4-i.fh-hannover.de ++# ++ ++VENDOR tncfhh 10000 ++BEGIN-VENDOR tncfhh ++ ++ATTRIBUTE TNC-Status 1 integer ++ ++VALUE TNC-Status Access 0 ++VALUE TNC-Status Isolate 1 ++VALUE TNC-Status None 2 ++ ++END-VENDOR tncfhh +diff -u -r -N freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/configure freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/configure +--- freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/configure 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/configure 2012-12-04 19:38:00.237420970 +0100 +@@ -1,61 +1,84 @@ + #! /bin/sh + # From configure.in Revision. + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.61. ++# Generated by GNU Autoconf 2.67. ++# + # + # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software ++# Foundation, Inc. ++# ++# + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. +-## --------------------- ## +-## M4sh Initialization. ## +-## --------------------- ## ++## -------------------- ## ++## M4sh Initialization. ## ++## -------------------- ## + + # Be more Bourne compatible + DUALCASE=1; export DUALCASE # for MKS sh +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST + else +- case `(set -o) 2>/dev/null` in +- *posix*) set -o posix ;; ++ case `(set -o) 2>/dev/null` in #( ++ *posix*) : ++ set -o posix ;; #( ++ *) : ++ ;; + esac +- + fi + + +- +- +-# PATH needs CR +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits +- +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' ++as_nl=' ++' ++export as_nl ++# Printing a long string crashes Solaris 7 /usr/bin/printf. ++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo ++# Prefer a ksh shell builtin over an external printf program on Solaris, ++# but without wasting forks for bash or zsh. ++if test -z "$BASH_VERSION$ZSH_VERSION" \ ++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='print -r --' ++ as_echo_n='print -rn --' ++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='printf %s\n' ++ as_echo_n='printf %s' ++else ++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then ++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ++ as_echo_n='/usr/ucb/echo -n' + else +- PATH_SEPARATOR=: ++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' ++ as_echo_n_body='eval ++ arg=$1; ++ case $arg in #( ++ *"$as_nl"*) ++ expr "X$arg" : "X\\(.*\\)$as_nl"; ++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; ++ esac; ++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ++ ' ++ export as_echo_n_body ++ as_echo_n='sh -c $as_echo_n_body as_echo' + fi +- rm -f conf$$.sh ++ export as_echo_body ++ as_echo='sh -c $as_echo_body as_echo' + fi + +-# Support unset when possible. +-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +- as_unset=unset +-else +- as_unset=false ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { ++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || ++ PATH_SEPARATOR=';' ++ } + fi + + +@@ -64,20 +87,18 @@ + # there to prevent editors from complaining about space-tab. + # (If _AS_PATH_WALK were called with IFS unset, it would disable word + # splitting by setting IFS to empty value.) +-as_nl=' +-' + IFS=" "" $as_nl" + + # Find who we are. Look in the path if we contain no directory separator. +-case $0 in ++case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++ done + IFS=$as_save_IFS + + ;; +@@ -88,354 +109,321 @@ + as_myself=$0 + fi + if test ! -f "$as_myself"; then +- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 +- { (exit 1); exit 1; } ++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ exit 1 + fi + +-# Work around bugs in pre-3.0 UWIN ksh. +-for as_var in ENV MAIL MAILPATH +-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++# Unset variables that we do not need and which cause bugs (e.g. in ++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" ++# suppresses any "Segmentation fault" message there. '((' could ++# trigger a bug in pdksh 5.2.14. ++for as_var in BASH_ENV ENV MAIL MAILPATH ++do eval test x\${$as_var+set} = xset \ ++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : + done + PS1='$ ' + PS2='> ' + PS4='+ ' + + # NLS nuisances. +-for as_var in \ +- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ +- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ +- LC_TELEPHONE LC_TIME +-do +- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then +- eval $as_var=C; export $as_var +- else +- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +- fi +-done +- +-# Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1 && +- test "X`expr 00001 : '.*\(...\)'`" = X001; then +- as_expr=expr +-else +- as_expr=false +-fi +- +-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then +- as_basename=basename +-else +- as_basename=false +-fi +- +- +-# Name of the executable. +-as_me=`$as_basename -- "$0" || +-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ +- X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)' \| . 2>/dev/null || +-echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ +- s//\1/ +- q +- } +- /^X\/\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\/\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` ++LC_ALL=C ++export LC_ALL ++LANGUAGE=C ++export LANGUAGE + + # CDPATH. +-$as_unset CDPATH +- ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + if test "x$CONFIG_SHELL" = x; then +- if (eval ":") 2>/dev/null; then +- as_have_required=yes ++ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '\${1+\"\$@\"}'='\"\$@\"' ++ setopt NO_GLOB_SUBST + else +- as_have_required=no ++ case \`(set -o) 2>/dev/null\` in #( ++ *posix*) : ++ set -o posix ;; #( ++ *) : ++ ;; ++esac + fi +- +- if test $as_have_required = yes && (eval ": +-(as_func_return () { +- (exit \$1) +-} +-as_func_success () { +- as_func_return 0 +-} +-as_func_failure () { +- as_func_return 1 +-} +-as_func_ret_success () { +- return 0 +-} +-as_func_ret_failure () { +- return 1 +-} ++" ++ as_required="as_fn_return () { (exit \$1); } ++as_fn_success () { as_fn_return 0; } ++as_fn_failure () { as_fn_return 1; } ++as_fn_ret_success () { return 0; } ++as_fn_ret_failure () { return 1; } + + exitcode=0 +-if as_func_success; then +- : +-else +- exitcode=1 +- echo as_func_success failed. +-fi +- +-if as_func_failure; then +- exitcode=1 +- echo as_func_failure succeeded. +-fi +- +-if as_func_ret_success; then +- : +-else +- exitcode=1 +- echo as_func_ret_success failed. +-fi +- +-if as_func_ret_failure; then +- exitcode=1 +- echo as_func_ret_failure succeeded. +-fi +- +-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then +- : ++as_fn_success || { exitcode=1; echo as_fn_success failed.; } ++as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } ++as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } ++as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } ++if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : ++ ++else ++ exitcode=1; echo positional parameters were not saved. ++fi ++test x\$exitcode = x0 || exit 1" ++ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO ++ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO ++ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && ++ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 ++test \$(( 1 + 1 )) = 2 || exit 1" ++ if (eval "$as_required") 2>/dev/null; then : ++ as_have_required=yes + else +- exitcode=1 +- echo positional parameters were not saved. ++ as_have_required=no + fi ++ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +-test \$exitcode = 0) || { (exit 1); exit 1; } +- +-( +- as_lineno_1=\$LINENO +- as_lineno_2=\$LINENO +- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && +- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +-") 2> /dev/null; then +- : + else +- as_candidate_shells= +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++as_found=false + for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- case $as_dir in ++ as_found=: ++ case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do +- as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ # Try only shells that exist, to save several forks. ++ as_shell=$as_dir/$as_base ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : ++ CONFIG_SHELL=$as_shell as_have_required=yes ++ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : ++ break 2 ++fi ++fi + done;; + esac ++ as_found=false + done ++$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && ++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : ++ CONFIG_SHELL=$SHELL as_have_required=yes ++fi; } + IFS=$as_save_IFS + + +- for as_shell in $as_candidate_shells $SHELL; do +- # Try only shells that exist, to save several forks. +- if { test -f "$as_shell" || test -f "$as_shell.exe"; } && +- { ("$as_shell") 2> /dev/null <<\_ASEOF +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +- emulate sh +- NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which +- # is contrary to our usage. Disable this feature. +- alias -g '${1+"$@"}'='"$@"' +- setopt NO_GLOB_SUBST +-else +- case `(set -o) 2>/dev/null` in +- *posix*) set -o posix ;; +-esac +- ++ if test "x$CONFIG_SHELL" != x; then : ++ # We cannot yet assume a decent shell, so we have to provide a ++ # neutralization value for shells without unset; and this also ++ # works around shells that cannot unset nonexistent variables. ++ BASH_ENV=/dev/null ++ ENV=/dev/null ++ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++fi ++ ++ if test x$as_have_required = xno; then : ++ $as_echo "$0: This script requires a shell more modern than all" ++ $as_echo "$0: the shells that I found on your system." ++ if test x${ZSH_VERSION+set} = xset ; then ++ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" ++ $as_echo "$0: be upgraded to zsh 4.3.4 or later." ++ else ++ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, ++$0: including any error possibly output before this ++$0: message. Then install a modern shell, or manually run ++$0: the script under such a shell if you do have one." ++ fi ++ exit 1 + fi +- +- +-: +-_ASEOF +-}; then +- CONFIG_SHELL=$as_shell +- as_have_required=yes +- if { "$as_shell" 2> /dev/null <<\_ASEOF +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +- emulate sh +- NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which +- # is contrary to our usage. Disable this feature. +- alias -g '${1+"$@"}'='"$@"' +- setopt NO_GLOB_SUBST +-else +- case `(set -o) 2>/dev/null` in +- *posix*) set -o posix ;; +-esac +- + fi ++fi ++SHELL=${CONFIG_SHELL-/bin/sh} ++export SHELL ++# Unset more variables known to interfere with behavior of common tools. ++CLICOLOR_FORCE= GREP_OPTIONS= ++unset CLICOLOR_FORCE GREP_OPTIONS + +- +-: +-(as_func_return () { +- (exit $1) +-} +-as_func_success () { +- as_func_return 0 +-} +-as_func_failure () { +- as_func_return 1 +-} +-as_func_ret_success () { +- return 0 +-} +-as_func_ret_failure () { +- return 1 ++## --------------------- ## ++## M4sh Shell Functions. ## ++## --------------------- ## ++# as_fn_unset VAR ++# --------------- ++# Portably unset VAR. ++as_fn_unset () ++{ ++ { eval $1=; unset $1;} + } ++as_unset=as_fn_unset + +-exitcode=0 +-if as_func_success; then +- : +-else +- exitcode=1 +- echo as_func_success failed. +-fi ++# as_fn_set_status STATUS ++# ----------------------- ++# Set $? to STATUS, without forking. ++as_fn_set_status () ++{ ++ return $1 ++} # as_fn_set_status + +-if as_func_failure; then +- exitcode=1 +- echo as_func_failure succeeded. +-fi ++# as_fn_exit STATUS ++# ----------------- ++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. ++as_fn_exit () ++{ ++ set +e ++ as_fn_set_status $1 ++ exit $1 ++} # as_fn_exit ++ ++# as_fn_mkdir_p ++# ------------- ++# Create "$as_dir" as a directory, including parents if necessary. ++as_fn_mkdir_p () ++{ + +-if as_func_ret_success; then +- : +-else +- exitcode=1 +- echo as_func_ret_success failed. +-fi ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || eval $as_mkdir_p || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + +-if as_func_ret_failure; then +- exitcode=1 +- echo as_func_ret_failure succeeded. +-fi + +-if ( set x; as_func_ret_success y && test x = "$1" ); then +- : ++} # as_fn_mkdir_p ++# as_fn_append VAR VALUE ++# ---------------------- ++# Append the text in VALUE to the end of the definition contained in VAR. Take ++# advantage of any shell optimizations that allow amortized linear growth over ++# repeated appends, instead of the typical quadratic growth present in naive ++# implementations. ++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : ++ eval 'as_fn_append () ++ { ++ eval $1+=\$2 ++ }' + else +- exitcode=1 +- echo positional parameters were not saved. +-fi +- +-test $exitcode = 0) || { (exit 1); exit 1; } +- +-( +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } +- +-_ASEOF +-}; then +- break +-fi +- +-fi +- +- done +- +- if test "x$CONFIG_SHELL" != x; then +- for as_var in BASH_ENV ENV +- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +- done +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +-fi +- +- +- if test $as_have_required = no; then +- echo This script requires a shell more modern than all the +- echo shells that I found on your system. Please install a +- echo modern shell, or manually run the script under such a +- echo shell if you do have one. +- { (exit 1); exit 1; } +-fi +- +- +-fi +- +-fi +- ++ as_fn_append () ++ { ++ eval $1=\$$1\$2 ++ } ++fi # as_fn_append ++ ++# as_fn_arith ARG... ++# ------------------ ++# Perform arithmetic evaluation on the ARGs, and store the result in the ++# global $as_val. Take advantage of shells that can avoid forks. The arguments ++# must be portable across $(()) and expr. ++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : ++ eval 'as_fn_arith () ++ { ++ as_val=$(( $* )) ++ }' ++else ++ as_fn_arith () ++ { ++ as_val=`expr "$@" || test $? -eq 1` ++ } ++fi # as_fn_arith + + +-(eval "as_func_return () { +- (exit \$1) +-} +-as_func_success () { +- as_func_return 0 +-} +-as_func_failure () { +- as_func_return 1 +-} +-as_func_ret_success () { +- return 0 +-} +-as_func_ret_failure () { +- return 1 +-} ++# as_fn_error STATUS ERROR [LINENO LOG_FD] ++# ---------------------------------------- ++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are ++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ++# script with STATUS, using 1 if that was 0. ++as_fn_error () ++{ ++ as_status=$1; test $as_status -eq 0 && as_status=1 ++ if test "$4"; then ++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 ++ fi ++ $as_echo "$as_me: error: $2" >&2 ++ as_fn_exit $as_status ++} # as_fn_error + +-exitcode=0 +-if as_func_success; then +- : ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr + else +- exitcode=1 +- echo as_func_success failed. +-fi +- +-if as_func_failure; then +- exitcode=1 +- echo as_func_failure succeeded. ++ as_expr=false + fi + +-if as_func_ret_success; then +- : ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename + else +- exitcode=1 +- echo as_func_ret_success failed. +-fi +- +-if as_func_ret_failure; then +- exitcode=1 +- echo as_func_ret_failure succeeded. ++ as_basename=false + fi + +-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then +- : ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname + else +- exitcode=1 +- echo positional parameters were not saved. ++ as_dirname=false + fi + +-test \$exitcode = 0") || { +- echo No shell found that supports shell functions. +- echo Please tell autoconf@gnu.org about your system, +- echo including any error possibly output before this +- echo message +-} ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits + + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { +- +- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO +- # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line after each line using $LINENO; the second 'sed' +- # does the real work. The second script uses 'N' to pair each +- # line-number line with the line containing $LINENO, and appends +- # trailing '-' during substitution so that $LINENO is not a special +- # case at line end. +- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # scripts with optimization help from Paolo Bonzini. Blame Lee +- # E. McMahon (1931-1989) for sed's syntax. :-) ++ as_lineno_1=$LINENO as_lineno_1a=$LINENO ++ as_lineno_2=$LINENO as_lineno_2a=$LINENO ++ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && ++ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { ++ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= +@@ -452,8 +440,7 @@ + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || +- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 +- { (exit 1); exit 1; }; } ++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +@@ -463,49 +450,40 @@ + exit + } + +- +-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then +- as_dirname=dirname +-else +- as_dirname=false +-fi +- + ECHO_C= ECHO_N= ECHO_T= +-case `echo -n x` in ++case `echo -n x` in #((((( + -n*) +- case `echo 'x\c'` in ++ case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. +- *) ECHO_C='\c';; ++ xy) ECHO_C='\c';; ++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ++ ECHO_T=' ';; + esac;; + *) + ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1 && +- test "X`expr 00001 : '.*\(...\)'`" = X001; then +- as_expr=expr +-else +- as_expr=false +-fi +- + rm -f conf$$ conf$$.exe conf$$.file + if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file + else + rm -f conf$$.dir +- mkdir conf$$.dir ++ mkdir conf$$.dir 2>/dev/null + fi +-echo >conf$$.file +-if ln -s conf$$.file conf$$ 2>/dev/null; then +- as_ln_s='ln -s' +- # ... but there are two gotchas: +- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. +- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. +- # In both cases, we have to default to `cp -p'. +- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++if (echo >conf$$.file) 2>/dev/null; then ++ if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++ elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++ else + as_ln_s='cp -p' +-elif ln conf$$.file conf$$ 2>/dev/null; then +- as_ln_s=ln ++ fi + else + as_ln_s='cp -p' + fi +@@ -513,7 +491,7 @@ + rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then +- as_mkdir_p=: ++ as_mkdir_p='mkdir -p "$as_dir"' + else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +@@ -530,12 +508,12 @@ + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then +- test -d "$1/."; ++ test -d "$1/."; + else +- case $1 in +- -*)set "./$1";; ++ case $1 in #( ++ -*)set "./$1";; + esac; +- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +@@ -549,11 +527,11 @@ + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +- +-exec 7<&0 </dev/null 6>&1 ++test -n "$DJDIR" || exec 7<&0 </dev/null ++exec 6>&1 + + # Name of the host. +-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, ++# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, + # so uname gets run too. + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +@@ -568,7 +546,6 @@ + subdirs= + MFLAGS= + MAKEFLAGS= +-SHELL=${CONFIG_SHELL-/bin/sh} + + # Identity of this package. + PACKAGE_NAME= +@@ -576,58 +553,102 @@ + PACKAGE_VERSION= + PACKAGE_STRING= + PACKAGE_BUGREPORT= ++PACKAGE_URL= + + ac_unique_file="rlm_eap_tnc.c" +-ac_subst_vars='SHELL +-PATH_SEPARATOR +-PACKAGE_NAME +-PACKAGE_TARNAME +-PACKAGE_VERSION +-PACKAGE_STRING +-PACKAGE_BUGREPORT +-exec_prefix +-prefix +-program_transform_name +-bindir +-sbindir +-libexecdir +-datarootdir +-datadir +-sysconfdir +-sharedstatedir +-localstatedir +-includedir +-oldincludedir +-docdir +-infodir +-htmldir +-dvidir +-pdfdir +-psdir +-libdir +-localedir +-mandir +-DEFS +-ECHO_C +-ECHO_N +-ECHO_T +-LIBS +-build_alias +-host_alias +-target_alias +-CC +-CFLAGS +-LDFLAGS +-CPPFLAGS +-ac_ct_CC +-EXEEXT +-OBJEXT +-eap_tnc_cflags +-eap_tnc_ldflags +-targetname ++# Factoring default headers for most tests. ++ac_includes_default="\ ++#include <stdio.h> ++#ifdef HAVE_SYS_TYPES_H ++# include <sys/types.h> ++#endif ++#ifdef HAVE_SYS_STAT_H ++# include <sys/stat.h> ++#endif ++#ifdef STDC_HEADERS ++# include <stdlib.h> ++# include <stddef.h> ++#else ++# ifdef HAVE_STDLIB_H ++# include <stdlib.h> ++# endif ++#endif ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H ++# include <memory.h> ++# endif ++# include <string.h> ++#endif ++#ifdef HAVE_STRINGS_H ++# include <strings.h> ++#endif ++#ifdef HAVE_INTTYPES_H ++# include <inttypes.h> ++#endif ++#ifdef HAVE_STDINT_H ++# include <stdint.h> ++#endif ++#ifdef HAVE_UNISTD_H ++# include <unistd.h> ++#endif" ++ ++ac_subst_vars='LTLIBOBJS + LIBOBJS +-LTLIBOBJS' ++targetname ++eap_tnc_ldflags ++eap_tnc_cflags ++EGREP ++GREP ++CPP ++OBJEXT ++EXEEXT ++ac_ct_CC ++CPPFLAGS ++LDFLAGS ++CFLAGS ++CC ++target_alias ++host_alias ++build_alias ++LIBS ++ECHO_T ++ECHO_N ++ECHO_C ++DEFS ++mandir ++localedir ++libdir ++psdir ++pdfdir ++dvidir ++htmldir ++infodir ++docdir ++oldincludedir ++includedir ++localstatedir ++sharedstatedir ++sysconfdir ++datadir ++datarootdir ++libexecdir ++sbindir ++bindir ++program_transform_name ++prefix ++exec_prefix ++PACKAGE_URL ++PACKAGE_BUGREPORT ++PACKAGE_STRING ++PACKAGE_VERSION ++PACKAGE_TARNAME ++PACKAGE_NAME ++PATH_SEPARATOR ++SHELL' + ac_subst_files='' ++ac_user_opts=' ++enable_option_checking ++' + ac_precious_vars='build_alias + host_alias + target_alias +@@ -635,12 +656,15 @@ + CFLAGS + LDFLAGS + LIBS +-CPPFLAGS' ++CPPFLAGS ++CPP' + + + # Initialize some variables set by options. + ac_init_help= + ac_init_version=false ++ac_unrecognized_opts= ++ac_unrecognized_sep= + # The variables have the same names as the options, with + # dashes changed to underlines. + cache_file=/dev/null +@@ -696,8 +720,9 @@ + fi + + case $ac_option in +- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; +- *) ac_optarg=yes ;; ++ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *=) ac_optarg= ;; ++ *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. +@@ -739,13 +764,20 @@ + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) +- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` ++ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid feature name: $ac_feature" >&2 +- { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` +- eval enable_$ac_feature=no ;; ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid feature name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"enable_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; +@@ -758,13 +790,20 @@ + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) +- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` ++ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid feature name: $ac_feature" >&2 +- { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` +- eval enable_$ac_feature=\$ac_optarg ;; ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid feature name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"enable_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -955,22 +994,36 @@ + ac_init_version=: ;; + + -with-* | --with-*) +- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` ++ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid package name: $ac_package" >&2 +- { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package | sed 's/[-.]/_/g'` +- eval with_$ac_package=\$ac_optarg ;; ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid package name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"with_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) +- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` ++ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid package name: $ac_package" >&2 +- { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package | sed 's/[-.]/_/g'` +- eval with_$ac_package=no ;; ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid package name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"with_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. +@@ -990,25 +1043,25 @@ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + +- -*) { echo "$as_me: error: unrecognized option: $ac_option +-Try \`$0 --help' for more information." >&2 +- { (exit 1); exit 1; }; } ++ -*) as_fn_error $? "unrecognized option: \`$ac_option' ++Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. +- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 +- { (exit 1); exit 1; }; } ++ case $ac_envvar in #( ++ '' | [0-9]* | *[!_$as_cr_alnum]* ) ++ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; ++ esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. +- echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && +- echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + +@@ -1017,23 +1070,36 @@ + + if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` +- { echo "$as_me: error: missing argument to $ac_option" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error $? "missing argument to $ac_option" ++fi ++ ++if test -n "$ac_unrecognized_opts"; then ++ case $enable_option_checking in ++ no) ;; ++ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; ++ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; ++ esac + fi + +-# Be sure to have absolute directory names. ++# Check all directory arguments for consistency. + for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir + do + eval ac_val=\$$ac_var ++ # Remove trailing slashes. ++ case $ac_val in ++ */ ) ++ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` ++ eval $ac_var=\$ac_val;; ++ esac ++ # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac +- { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" + done + + # There might be people who depend on the old broken behavior: `$host' +@@ -1047,8 +1113,8 @@ + if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe +- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. +- If a cross compiler is detected then cross compile mode will be used." >&2 ++ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. ++ If a cross compiler is detected then cross compile mode will be used" >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +@@ -1063,23 +1129,21 @@ + ac_pwd=`pwd` && test -n "$ac_pwd" && + ac_ls_di=`ls -di .` && + ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || +- { echo "$as_me: error: Working directory cannot be determined" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error $? "working directory cannot be determined" + test "X$ac_ls_di" = "X$ac_pwd_ls_di" || +- { echo "$as_me: error: pwd does not report name of working directory" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error $? "pwd does not report name of working directory" + + + # Find the source files, if location was not specified. + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. +- ac_confdir=`$as_dirname -- "$0" || +-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$0" : 'X\(//\)[^/]' \| \ +- X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)' \| . 2>/dev/null || +-echo X"$0" | ++ ac_confdir=`$as_dirname -- "$as_myself" || ++$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_myself" : 'X\(//\)[^/]' \| \ ++ X"$as_myself" : 'X\(//\)$' \| \ ++ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q +@@ -1106,13 +1170,11 @@ + fi + if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" + fi + ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" + ac_abs_confdir=`( +- cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 +- { (exit 1); exit 1; }; } ++ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` + # When building in place, set srcdir=. + if test "$ac_abs_confdir" = "$ac_pwd"; then +@@ -1152,7 +1214,7 @@ + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit +- -q, --quiet, --silent do not print \`checking...' messages ++ -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files +@@ -1160,9 +1222,9 @@ + + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX +- [$ac_default_prefix] ++ [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX +- [PREFIX] ++ [PREFIX] + + By default, \`make install' will install all the files in + \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +@@ -1172,25 +1234,25 @@ + For better control, use the options below. + + Fine tuning of the installation directories: +- --bindir=DIR user executables [EPREFIX/bin] +- --sbindir=DIR system admin executables [EPREFIX/sbin] +- --libexecdir=DIR program executables [EPREFIX/libexec] +- --sysconfdir=DIR read-only single-machine data [PREFIX/etc] +- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] +- --localstatedir=DIR modifiable single-machine data [PREFIX/var] +- --libdir=DIR object code libraries [EPREFIX/lib] +- --includedir=DIR C header files [PREFIX/include] +- --oldincludedir=DIR C header files for non-gcc [/usr/include] +- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] +- --datadir=DIR read-only architecture-independent data [DATAROOTDIR] +- --infodir=DIR info documentation [DATAROOTDIR/info] +- --localedir=DIR locale-dependent data [DATAROOTDIR/locale] +- --mandir=DIR man documentation [DATAROOTDIR/man] +- --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] +- --htmldir=DIR html documentation [DOCDIR] +- --dvidir=DIR dvi documentation [DOCDIR] +- --pdfdir=DIR pdf documentation [DOCDIR] +- --psdir=DIR ps documentation [DOCDIR] ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] + _ACEOF + + cat <<\_ACEOF +@@ -1207,12 +1269,14 @@ + LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a + nonstandard directory <lib dir> + LIBS libraries to pass to the linker, e.g. -l<library> +- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if ++ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if + you have headers in a nonstandard directory <include dir> ++ CPP C preprocessor + + Use these variables to override the choices made by `configure' or to help + it to find libraries and programs with nonstandard names/locations. + ++Report bugs to the package provider. + _ACEOF + ac_status=$? + fi +@@ -1220,15 +1284,17 @@ + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue +- test -d "$ac_dir" || continue ++ test -d "$ac_dir" || ++ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || ++ continue + ac_builddir=. + + case "$ac_dir" in + .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. +- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; +@@ -1264,7 +1330,7 @@ + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else +- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +@@ -1274,21 +1340,305 @@ + if $ac_init_version; then + cat <<\_ACEOF + configure +-generated by GNU Autoconf 2.61 ++generated by GNU Autoconf 2.67 + +-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++Copyright (C) 2010 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF + exit + fi ++ ++## ------------------------ ## ++## Autoconf initialization. ## ++## ------------------------ ## ++ ++# ac_fn_c_try_compile LINENO ++# -------------------------- ++# Try to compile conftest.$ac_ext, and return whether this succeeded. ++ac_fn_c_try_compile () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ rm -f conftest.$ac_objext ++ if { { ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compile") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_c_try_compile ++ ++# ac_fn_c_try_link LINENO ++# ----------------------- ++# Try to link conftest.$ac_ext, and return whether this succeeded. ++ac_fn_c_try_link () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ rm -f conftest.$ac_objext conftest$ac_exeext ++ if { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && { ++ test "$cross_compiling" = yes || ++ $as_test_x conftest$ac_exeext ++ }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information ++ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would ++ # interfere with the next link command; also delete a directory that is ++ # left behind by Apple's compiler. We do this before executing the actions. ++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_c_try_link ++ ++# ac_fn_c_try_cpp LINENO ++# ---------------------- ++# Try to preprocess conftest.$ac_ext, and return whether this succeeded. ++ac_fn_c_try_cpp () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if { { ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } > conftest.i && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_c_try_cpp ++ ++# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES ++# ------------------------------------------------------- ++# Tests whether HEADER exists, giving a warning if it cannot be compiled using ++# the include files in INCLUDES and setting the cache variable VAR ++# accordingly. ++ac_fn_c_check_header_mongrel () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if eval "test \"\${$3+set}\"" = set; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval "test \"\${$3+set}\"" = set; then : ++ $as_echo_n "(cached) " >&6 ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++else ++ # Is the header compilable? ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 ++$as_echo_n "checking $2 usability... " >&6; } ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++#include <$2> ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_header_compiler=yes ++else ++ ac_header_compiler=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 ++$as_echo "$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 ++$as_echo_n "checking $2 presence... " >&6; } ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <$2> ++_ACEOF ++if ac_fn_c_try_cpp "$LINENO"; then : ++ ac_header_preproc=yes ++else ++ ac_header_preproc=no ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 ++$as_echo "$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( ++ yes:no: ) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 ++$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 ++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ++ ;; ++ no:yes:* ) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 ++$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 ++$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 ++$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 ++$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 ++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ++ ;; ++esac ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval "test \"\${$3+set}\"" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ eval "$3=\$ac_header_compiler" ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++fi ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ ++} # ac_fn_c_check_header_mongrel ++ ++# ac_fn_c_try_run LINENO ++# ---------------------- ++# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes ++# that executables *can* be run. ++ac_fn_c_try_run () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' ++ { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: program exited with status $ac_status" >&5 ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=$ac_status ++fi ++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_c_try_run ++ ++# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES ++# ------------------------------------------------------- ++# Tests whether HEADER exists and can be compiled using the include files in ++# INCLUDES, setting the cache variable VAR accordingly. ++ac_fn_c_check_header_compile () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval "test \"\${$3+set}\"" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++#include <$2> ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ eval "$3=yes" ++else ++ eval "$3=no" ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ ++} # ac_fn_c_check_header_compile + cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + + It was created by $as_me, which was +-generated by GNU Autoconf 2.61. Invocation command line was ++generated by GNU Autoconf 2.67. Invocation command line was + + $ $0 $@ + +@@ -1324,8 +1674,8 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- echo "PATH: $as_dir" +-done ++ $as_echo "PATH: $as_dir" ++ done + IFS=$as_save_IFS + + } >&5 +@@ -1359,12 +1709,12 @@ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) +- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in +- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; ++ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) +- ac_configure_args1="$ac_configure_args1 '$ac_arg'" ++ as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else +@@ -1380,13 +1730,13 @@ + -* ) ac_must_keep_next=true ;; + esac + fi +- ac_configure_args="$ac_configure_args '$ac_arg'" ++ as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done + done +-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } ++{ ac_configure_args0=; unset ac_configure_args0;} ++{ ac_configure_args1=; unset ac_configure_args1;} + + # When interrupted or exit'd, cleanup temporary files, and complete + # config.log. We remove comments because anyway the quotes in there +@@ -1398,11 +1748,9 @@ + { + echo + +- cat <<\_ASBOX +-## ---------------- ## ++ $as_echo "## ---------------- ## + ## Cache variables. ## +-## ---------------- ## +-_ASBOX ++## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, + ( +@@ -1411,12 +1759,13 @@ + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( +- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 ++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( +- *) $as_unset $ac_var ;; ++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( ++ *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done +@@ -1435,128 +1784,136 @@ + ) + echo + +- cat <<\_ASBOX +-## ----------------- ## ++ $as_echo "## ----------------- ## + ## Output variables. ## +-## ----------------- ## +-_ASBOX ++## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in +- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac +- echo "$ac_var='\''$ac_val'\''" ++ $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then +- cat <<\_ASBOX +-## ------------------- ## ++ $as_echo "## ------------------- ## + ## File substitutions. ## +-## ------------------- ## +-_ASBOX ++## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in +- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac +- echo "$ac_var='\''$ac_val'\''" ++ $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then +- cat <<\_ASBOX +-## ----------- ## ++ $as_echo "## ----------- ## + ## confdefs.h. ## +-## ----------- ## +-_ASBOX ++## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && +- echo "$as_me: caught signal $ac_signal" +- echo "$as_me: exit $exit_status" ++ $as_echo "$as_me: caught signal $ac_signal" ++ $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 + for ac_signal in 1 2 13 15; do +- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal ++ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal + done + ac_signal=0 + + # confdefs.h avoids OS command line length limits that DEFS can exceed. + rm -f -r conftest* confdefs.h + ++$as_echo "/* confdefs.h */" > confdefs.h ++ + # Predefined preprocessor variables. + + cat >>confdefs.h <<_ACEOF + #define PACKAGE_NAME "$PACKAGE_NAME" + _ACEOF + +- + cat >>confdefs.h <<_ACEOF + #define PACKAGE_TARNAME "$PACKAGE_TARNAME" + _ACEOF + +- + cat >>confdefs.h <<_ACEOF + #define PACKAGE_VERSION "$PACKAGE_VERSION" + _ACEOF + +- + cat >>confdefs.h <<_ACEOF + #define PACKAGE_STRING "$PACKAGE_STRING" + _ACEOF + +- + cat >>confdefs.h <<_ACEOF + #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" + _ACEOF + ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_URL "$PACKAGE_URL" ++_ACEOF ++ + + # Let the site file select an alternate cache file if it wants to. +-# Prefer explicitly selected file to automatically selected ones. ++# Prefer an explicitly selected file to automatically selected ones. ++ac_site_file1=NONE ++ac_site_file2=NONE + if test -n "$CONFIG_SITE"; then +- set x "$CONFIG_SITE" ++ # We do not want a PATH search for config.site. ++ case $CONFIG_SITE in #(( ++ -*) ac_site_file1=./$CONFIG_SITE;; ++ */*) ac_site_file1=$CONFIG_SITE;; ++ *) ac_site_file1=./$CONFIG_SITE;; ++ esac + elif test "x$prefix" != xNONE; then +- set x "$prefix/share/config.site" "$prefix/etc/config.site" ++ ac_site_file1=$prefix/share/config.site ++ ac_site_file2=$prefix/etc/config.site + else +- set x "$ac_default_prefix/share/config.site" \ +- "$ac_default_prefix/etc/config.site" ++ ac_site_file1=$ac_default_prefix/share/config.site ++ ac_site_file2=$ac_default_prefix/etc/config.site + fi +-shift +-for ac_site_file ++for ac_site_file in "$ac_site_file1" "$ac_site_file2" + do +- if test -r "$ac_site_file"; then +- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +-echo "$as_me: loading site script $ac_site_file" >&6;} ++ test "x$ac_site_file" = xNONE && continue ++ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 ++$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 +- . "$ac_site_file" ++ . "$ac_site_file" \ ++ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "failed to load site script $ac_site_file ++See \`config.log' for more details" "$LINENO" 5 ; } + fi + done + + if test -r "$cache_file"; then +- # Some versions of bash will fail to source /dev/null (special +- # files actually), so we avoid doing that. +- if test -f "$cache_file"; then +- { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +-echo "$as_me: loading cache $cache_file" >&6;} ++ # Some versions of bash will fail to source /dev/null (special files ++ # actually), so we avoid doing that. DJGPP emulates it as a regular file. ++ if test /dev/null != "$cache_file" && test -f "$cache_file"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 ++$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi + else +- { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +-echo "$as_me: creating cache $cache_file" >&6;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 ++$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file + fi + +@@ -1570,60 +1927,56 @@ + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) +- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) +- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 ++$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then +- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} +- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +-echo "$as_me: former value: $ac_old_val" >&2;} +- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +-echo "$as_me: current value: $ac_new_val" >&2;} +- ac_cache_corrupted=: ++ # differences in whitespace do not lead to failure. ++ ac_old_val_w=`echo x $ac_old_val` ++ ac_new_val_w=`echo x $ac_new_val` ++ if test "$ac_old_val_w" != "$ac_new_val_w"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 ++$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ ac_cache_corrupted=: ++ else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 ++$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} ++ eval $ac_var=\$ac_old_val ++ fi ++ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 ++$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 ++$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in +- *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. +- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; ++ *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi + done + if $ac_cache_corrupted; then +- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +-echo "$as_me: error: changes in the environment can compromise the build" >&2;} +- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} +- { (exit 1); exit 1; }; } +-fi +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 ++$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 ++fi ++## -------------------- ## ++## Main body of script. ## ++## -------------------- ## + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' +@@ -1635,6 +1988,9 @@ + + + ++eap_tnc_cflags= ++eap_tnc_ldflags=-lnaaeap ++ + if test x$with_rlm_eap_tnc != xno; then + + ac_ext=c +@@ -1645,10 +2001,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -1658,25 +2014,25 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + + +@@ -1685,10 +2041,10 @@ + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -1698,25 +2054,25 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 ++$as_echo "$ac_ct_CC" >&6; } + else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + + if test "x$ac_ct_CC" = x; then +@@ -1724,12 +2080,8 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&5 +-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac + CC=$ac_ct_CC +@@ -1742,10 +2094,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -1755,25 +2107,25 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + + +@@ -1782,10 +2134,10 @@ + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -1796,18 +2148,18 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + if test $ac_prog_rejected = yes; then +@@ -1826,11 +2178,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + + +@@ -1841,10 +2193,10 @@ + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -1854,25 +2206,25 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + + +@@ -1885,10 +2237,10 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -1898,25 +2250,25 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do ++ for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done + IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 ++$as_echo "$ac_ct_CC" >&6; } + else +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + + +@@ -1928,12 +2280,8 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&5 +-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} + ac_tool_warned=yes ;; + esac + CC=$ac_ct_CC +@@ -1943,51 +2291,37 @@ + fi + + +-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +-See \`config.log' for more details." >&5 +-echo "$as_me: error: no acceptable C compiler found in \$PATH +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "no acceptable C compiler found in \$PATH ++See \`config.log' for more details" "$LINENO" 5 ; } + + # Provide some information about the compiler. +-echo "$as_me:$LINENO: checking for C compiler version" >&5 +-ac_compiler=`set X $ac_compile; echo $2` +-{ (ac_try="$ac_compiler --version >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compiler --version >&5") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -v >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compiler -v >&5") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -V >&5" ++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 ++set X $ac_compile ++ac_compiler=$2 ++for ac_option in --version -v -V -qversion; do ++ { { ac_try="$ac_compiler $ac_option >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compiler -V >&5") 2>&5 ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } ++ if test -s conftest.err; then ++ sed '10a\ ++... rest of stderr output deleted ... ++ 10q' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ fi ++ rm -f conftest.er1 conftest.err ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++done + +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -1999,42 +2333,38 @@ + } + _ACEOF + ac_clean_files_save=$ac_clean_files +-ac_clean_files="$ac_clean_files a.out a.exe b.out" ++ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. +-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } +-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +-# +-# List of possible output files, starting from the most likely. +-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) +-# only as a last resort. b.out is created by i960 compilers. +-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' +-# +-# The IRIX 6 linker writes into existing files which may not be +-# executable, retaining their permissions. Remove them first so a +-# subsequent execution test works. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 ++$as_echo_n "checking whether the C compiler works... " >&6; } ++ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` ++ ++# The possible output files: ++ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ++ + ac_rmfiles= + for ac_file in $ac_files + do + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac + done + rm -f $ac_rmfiles + +-if { (ac_try="$ac_link_default" ++if { { ac_try="$ac_link_default" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. + # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' + # in a Makefile. We should not override ac_cv_exeext if it was cached, +@@ -2044,14 +2374,14 @@ + do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) +- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi +@@ -2070,116 +2400,132 @@ + else + ac_file='' + fi +- +-{ echo "$as_me:$LINENO: result: $ac_file" >&5 +-echo "${ECHO_T}$ac_file" >&6; } +-if test -z "$ac_file"; then +- echo "$as_me: failed program was:" >&5 ++if test -z "$ac_file"; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++$as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +-See \`config.log' for more details." >&5 +-echo "$as_me: error: C compiler cannot create executables +-See \`config.log' for more details." >&2;} +- { (exit 77); exit 77; }; } +-fi +- ++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error 77 "C compiler cannot create executables ++See \`config.log' for more details" "$LINENO" 5 ; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 ++$as_echo_n "checking for C compiler default output file name... " >&6; } ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 ++$as_echo "$ac_file" >&6; } + ac_exeext=$ac_cv_exeext + ++rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ++ac_clean_files=$ac_clean_files_save ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 ++$as_echo_n "checking for suffix of executables... " >&6; } ++if { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : ++ # If both `conftest.exe' and `conftest' are `present' (well, observable) ++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will ++# work properly (i.e., refer to `conftest.exe'), while it won't with ++# `rm'. ++for ac_file in conftest.exe conftest conftest.*; do ++ test -f "$ac_file" || continue ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ break;; ++ * ) break;; ++ esac ++done ++else ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details" "$LINENO" 5 ; } ++fi ++rm -f conftest conftest$ac_cv_exeext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 ++$as_echo "$ac_cv_exeext" >&6; } ++ ++rm -f conftest.$ac_ext ++EXEEXT=$ac_cv_exeext ++ac_exeext=$EXEEXT ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <stdio.h> ++int ++main () ++{ ++FILE *f = fopen ("conftest.out", "w"); ++ return ferror (f) || fclose (f) != 0; ++ ++ ; ++ return 0; ++} ++_ACEOF ++ac_clean_files="$ac_clean_files conftest.out" + # Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } +-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +-# If not cross compiling, check that we can run a simple program. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 ++$as_echo_n "checking whether we are cross compiling... " >&6; } + if test "$cross_compiling" != yes; then +- if { ac_try='./$ac_file' +- { (case "(($ac_try" in ++ { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if { ac_try='./conftest$ac_cv_exeext' ++ { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else +- { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +-If you meant to cross compile, use \`--host'. +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot run C compiled programs. ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot run C compiled programs. + If you meant to cross compile, use \`--host'. +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++See \`config.log' for more details" "$LINENO" 5 ; } + fi + fi + fi +-{ echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 ++$as_echo "$cross_compiling" >&6; } + +-rm -f a.out a.exe conftest$ac_cv_exeext b.out ++rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out + ac_clean_files=$ac_clean_files_save +-# Check that the compiler produces executables we can run. If not, either +-# the compiler is broken, or we cross compile. +-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } +-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 +-echo "${ECHO_T}$cross_compiling" >&6; } +- +-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 +-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- # If both `conftest.exe' and `conftest' are `present' (well, observable) +-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +-# work properly (i.e., refer to `conftest.exe'), while it won't with +-# `rm'. +-for ac_file in conftest.exe conftest conftest.*; do +- test -f "$ac_file" || continue +- case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; +- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- break;; +- * ) break;; +- esac +-done ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 ++$as_echo_n "checking for suffix of object files... " >&6; } ++if test "${ac_cv_objext+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-fi +- +-rm -f conftest$ac_cv_exeext +-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +-echo "${ECHO_T}$ac_cv_exeext" >&6; } +- +-rm -f conftest.$ac_ext +-EXEEXT=$ac_cv_exeext +-ac_exeext=$EXEEXT +-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 +-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } +-if test "${ac_cv_objext+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -2191,51 +2537,46 @@ + } + _ACEOF + rm -f conftest.o conftest.obj +-if { (ac_try="$ac_compile" ++if { { ac_try="$ac_compile" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac + done + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute suffix of object files: cannot compile +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot compute suffix of object files: cannot compile ++See \`config.log' for more details" "$LINENO" 5 ; } + fi +- + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +-echo "${ECHO_T}$ac_cv_objext" >&6; } ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 ++$as_echo "$ac_cv_objext" >&6; } + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT +-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } +-if test "${ac_cv_c_compiler_gnu+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 ++$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } ++if test "${ac_cv_c_compiler_gnu+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -2249,54 +2590,34 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } +-GCC=`test $ac_compiler_gnu = yes && echo yes` ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 ++$as_echo "$ac_cv_c_compiler_gnu" >&6; } ++if test $ac_compiler_gnu = yes; then ++ GCC=yes ++else ++ GCC= ++fi + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } +-if test "${ac_cv_prog_cc_g+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 ++$as_echo_n "checking whether $CC accepts -g... " >&6; } ++if test "${ac_cv_prog_cc_g+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -2307,34 +2628,11 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- CFLAGS="" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ CFLAGS="" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -2345,35 +2643,12 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++if ac_fn_c_try_compile "$LINENO"; then : + +- ac_c_werror_flag=$ac_save_c_werror_flag ++else ++ ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -2384,42 +2659,18 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +- + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 ++$as_echo "$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -2435,18 +2686,14 @@ + CFLAGS= + fi + fi +-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } +-if test "${ac_cv_prog_cc_c89+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 ++$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + ac_cv_prog_cc_c89=no + ac_save_CC=$CC +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include <stdarg.h> + #include <stdio.h> +@@ -2503,31 +2750,9 @@ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" + do + CC="$ac_save_CC $ac_arg" +- rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then ++ if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- + fi +- + rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break + done +@@ -2538,17 +2763,19 @@ + # AC_CACHE_VAL + case "x$ac_cv_prog_cc_c89" in + x) +- { echo "$as_me:$LINENO: result: none needed" >&5 +-echo "${ECHO_T}none needed" >&6; } ;; ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 ++$as_echo "none needed" >&6; } ;; + xno) +- { echo "$as_me:$LINENO: result: unsupported" >&5 +-echo "${ECHO_T}unsupported" >&6; } ;; ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 ++$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" +- { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 ++$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; + esac ++if test "x$ac_cv_prog_cc_c89" != xno; then : + ++fi + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' +@@ -2557,81 +2784,474 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +- +-{ echo "$as_me:$LINENO: checking for exchangeTNCCSMessages in -lTNCS" >&5 +-echo $ECHO_N "checking for exchangeTNCCSMessages in -lTNCS... $ECHO_C" >&6; } +-if test "${ac_cv_lib_TNCS_exchangeTNCCSMessages+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for processEAPTNCData in -lnaaeap" >&5 ++$as_echo_n "checking for processEAPTNCData in -lnaaeap... " >&6; } ++if test "${ac_cv_lib_naaeap_processEAPTNCData+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + ac_check_lib_save_LIBS=$LIBS +-LIBS="-lTNCS $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ ++LIBS="-lnaaeap $LIBS" ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char processEAPTNCData (); ++int ++main () ++{ ++return processEAPTNCData (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_lib_naaeap_processEAPTNCData=yes ++else ++ ac_cv_lib_naaeap_processEAPTNCData=no ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_naaeap_processEAPTNCData" >&5 ++$as_echo "$ac_cv_lib_naaeap_processEAPTNCData" >&6; } ++if test "x$ac_cv_lib_naaeap_processEAPTNCData" = x""yes; then : ++ cat >>confdefs.h <<_ACEOF ++#define HAVE_LIBNAAEAP 1 ++_ACEOF ++ ++ LIBS="-lnaaeap $LIBS" ++ ++else ++ fail="$fail -lnaaeap" ++fi ++ ++ if test -x"$ac_cv_lib_NAAEAP_processEAPTNCData" == -x"no"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: the NAAEAP library was not found!" >&5 ++$as_echo "$as_me: WARNING: the NAAEAP library was not found!" >&2;} ++ fail="$fail -lNAAEAP" ++ fi ++ ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 ++$as_echo_n "checking how to run the C preprocessor... " >&6; } ++# On Suns, sometimes $CPP names a directory. ++if test -n "$CPP" && test -d "$CPP"; then ++ CPP= ++fi ++if test -z "$CPP"; then ++ if test "${ac_cv_prog_CPP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ # Double quotes because CPP needs to be expanded ++ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" ++ do ++ ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since ++ # <limits.h> exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#ifdef __STDC__ ++# include <limits.h> ++#else ++# include <assert.h> ++#endif ++ Syntax error ++_ACEOF ++if ac_fn_c_try_cpp "$LINENO"; then : ++ ++else ++ # Broken: fails on valid input. ++continue ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <ac_nonexistent.h> ++_ACEOF ++if ac_fn_c_try_cpp "$LINENO"; then : ++ # Broken: success on invalid input. ++continue ++else ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext ++ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.i conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then : ++ break ++fi ++ ++ done ++ ac_cv_prog_CPP=$CPP ++ ++fi ++ CPP=$ac_cv_prog_CPP ++else ++ ac_cv_prog_CPP=$CPP ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 ++$as_echo "$CPP" >&6; } ++ac_preproc_ok=false ++for ac_c_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since ++ # <limits.h> exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#ifdef __STDC__ ++# include <limits.h> ++#else ++# include <assert.h> ++#endif ++ Syntax error ++_ACEOF ++if ac_fn_c_try_cpp "$LINENO"; then : ++ ++else ++ # Broken: fails on valid input. ++continue ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <ac_nonexistent.h> ++_ACEOF ++if ac_fn_c_try_cpp "$LINENO"; then : ++ # Broken: success on invalid input. ++continue ++else ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext ++ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.i conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then : ++ ++else ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details" "$LINENO" 5 ; } ++fi ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 ++$as_echo_n "checking for grep that handles long lines and -e... " >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -z "$GREP"; then ++ ac_path_GREP_found=false ++ # Loop through the user's path and test for each of PROGNAME-LIST ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in grep ggrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue ++# Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; ++*) ++ ac_count=0 ++ $as_echo_n 0123456789 >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ $as_echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ as_fn_arith $ac_count + 1 && ac_count=$as_val ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ $ac_path_GREP_found && break 3 ++ done ++ done ++ done ++IFS=$as_save_IFS ++ if test -z "$ac_cv_path_GREP"; then ++ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 ++ fi ++else ++ ac_cv_path_GREP=$GREP ++fi ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 ++$as_echo "$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 ++$as_echo_n "checking for egrep... " >&6; } ++if test "${ac_cv_path_EGREP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ if test -z "$EGREP"; then ++ ac_path_EGREP_found=false ++ # Loop through the user's path and test for each of PROGNAME-LIST ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue ++# Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; ++*) ++ ac_count=0 ++ $as_echo_n 0123456789 >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ $as_echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ as_fn_arith $ac_count + 1 && ac_count=$as_val ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ $ac_path_EGREP_found && break 3 ++ done ++ done ++ done ++IFS=$as_save_IFS ++ if test -z "$ac_cv_path_EGREP"; then ++ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 ++ fi ++else ++ ac_cv_path_EGREP=$EGREP ++fi ++ ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 ++$as_echo "$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 ++$as_echo_n "checking for ANSI C header files... " >&6; } ++if test "${ac_cv_header_stdc+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <stdlib.h> ++#include <stdarg.h> ++#include <string.h> ++#include <float.h> ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_header_stdc=yes ++else ++ ac_cv_header_stdc=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++if test $ac_cv_header_stdc = yes; then ++ # SunOS 4.x string.h does not declare mem*, contrary to ANSI. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <string.h> ++ + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "memchr" >/dev/null 2>&1; then : ++ ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* ++ ++fi ++ ++if test $ac_cv_header_stdc = yes; then ++ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <stdlib.h> ++ ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "free" >/dev/null 2>&1; then : ++ ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* ++ ++fi ++ ++if test $ac_cv_header_stdc = yes; then ++ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. ++ if test "$cross_compiling" = yes; then : ++ : ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" ++#include <ctype.h> ++#include <stdlib.h> ++#if ((' ' & 0x0FF) == 0x020) ++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') ++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#else ++# define ISLOWER(c) \ ++ (('a' <= (c) && (c) <= 'i') \ ++ || ('j' <= (c) && (c) <= 'r') \ ++ || ('s' <= (c) && (c) <= 'z')) ++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) + #endif +-char exchangeTNCCSMessages (); ++ ++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) + int + main () + { +-return exchangeTNCCSMessages (); +- ; ++ int i; ++ for (i = 0; i < 256; i++) ++ if (XOR (islower (i), ISLOWER (i)) ++ || toupper (i) != TOUPPER (i)) ++ return 2; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- ac_cv_lib_TNCS_exchangeTNCCSMessages=yes ++if ac_fn_c_try_run "$LINENO"; then : ++ + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ ac_cv_header_stdc=no ++fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext ++fi + +- ac_cv_lib_TNCS_exchangeTNCCSMessages=no + fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 ++$as_echo "$ac_cv_header_stdc" >&6; } ++if test $ac_cv_header_stdc = yes; then ++ ++$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS + fi +-{ echo "$as_me:$LINENO: result: $ac_cv_lib_TNCS_exchangeTNCCSMessages" >&5 +-echo "${ECHO_T}$ac_cv_lib_TNCS_exchangeTNCCSMessages" >&6; } +-if test $ac_cv_lib_TNCS_exchangeTNCCSMessages = yes; then ++ ++# On IRIX 5.3, sys/types and inttypes.h are conflicting. ++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ ++ inttypes.h stdint.h unistd.h ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default ++" ++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +-#define HAVE_LIBTNCS 1 ++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF + +- LIBS="-lTNCS $LIBS" ++fi ++ ++done ++ ++ ++for ac_header in naaeap/naaeap.h ++do : ++ ac_fn_c_check_header_mongrel "$LINENO" "naaeap/naaeap.h" "ac_cv_header_naaeap_naaeap_h" "$ac_includes_default" ++if test "x$ac_cv_header_naaeap_naaeap_h" = x""yes; then : ++ cat >>confdefs.h <<_ACEOF ++#define HAVE_NAAEAP_NAAEAP_H 1 ++_ACEOF + ++else ++ fail="$fail -Inaaeap.h" + fi + +- if test "x$ac_cv_lib_tncs_exchangetnccsmessages" != xyes; then +- { echo "$as_me:$LINENO: WARNING: the TNCS library isn't found!" >&5 +-echo "$as_me: WARNING: the TNCS library isn't found!" >&2;} +- fail="$fail -lTNCS" ++done ++ ++ if test -x"$ac_cv_header_naaeap_h" == -x"no"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: the naaeap header was not found!" >&5 ++$as_echo "$as_me: WARNING: the naaeap header was not found!" >&2;} ++ fail="$fail -Inaaeap.h" + fi + + targetname=rlm_eap_tnc +@@ -2642,14 +3262,12 @@ + + if test x"$fail" != x""; then + if test x"${enable_strict_dependencies}" = x"yes"; then +- { { echo "$as_me:$LINENO: error: set --without-rlm_eap_tnc to disable it explicitly." >&5 +-echo "$as_me: error: set --without-rlm_eap_tnc to disable it explicitly." >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error $? "set --without-rlm_eap_tnc to disable it explicitly." "$LINENO" 5 + else +- { echo "$as_me:$LINENO: WARNING: silently not building rlm_eap_tnc." >&5 +-echo "$as_me: WARNING: silently not building rlm_eap_tnc." >&2;} +- { echo "$as_me:$LINENO: WARNING: FAILURE: rlm_eap_tnc requires: $fail." >&5 +-echo "$as_me: WARNING: FAILURE: rlm_eap_tnc requires: $fail." >&2;}; ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: silently not building rlm_eap_tnc." >&5 ++$as_echo "$as_me: WARNING: silently not building rlm_eap_tnc." >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: FAILURE: rlm_eap_tnc requires: $fail." >&5 ++$as_echo "$as_me: WARNING: FAILURE: rlm_eap_tnc requires: $fail." >&2;}; + targetname="" + fi + fi +@@ -2658,11 +3276,7 @@ + + + +- +- unset ac_cv_env_LIBS_set +- unset ac_cv_env_LIBS_value +- +- ac_config_files="$ac_config_files Makefile" ++ac_config_files="$ac_config_files Makefile" + + cat >confcache <<\_ACEOF + # This file is a shell script that caches the results of configure +@@ -2691,12 +3305,13 @@ + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( +- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 ++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( +- *) $as_unset $ac_var ;; ++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( ++ *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done +@@ -2704,8 +3319,8 @@ + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) +- # `set' does not quote correctly, so add quotes (double-quote +- # substitution turns \\\\ into \\, and sed turns \\ into \). ++ # `set' does not quote correctly, so add quotes: double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" +@@ -2728,12 +3343,12 @@ + if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && +- { echo "$as_me:$LINENO: updating cache $cache_file" >&5 +-echo "$as_me: updating cache $cache_file" >&6;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 ++$as_echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else +- { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +-echo "$as_me: not updating unwritable cache $cache_file" >&6;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 ++$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi + fi + rm -f confcache +@@ -2750,6 +3365,12 @@ + # take arguments), then branch to the quote section. Otherwise, + # look for a macro that doesn't take arguments. + ac_script=' ++:mline ++/\\$/{ ++ N ++ s,\\\n,, ++ b mline ++} + t clear + :clear + s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g +@@ -2776,14 +3397,15 @@ + + ac_libobjs= + ac_ltlibobjs= ++U= + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' +- ac_i=`echo "$ac_i" | sed "$ac_script"` ++ ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. +- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" +- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' ++ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' + done + LIBOBJS=$ac_libobjs + +@@ -2792,11 +3414,13 @@ + + + : ${CONFIG_STATUS=./config.status} ++ac_write_fail=0 + ac_clean_files_save=$ac_clean_files + ac_clean_files="$ac_clean_files $CONFIG_STATUS" +-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +-echo "$as_me: creating $CONFIG_STATUS" >&6;} +-cat >$CONFIG_STATUS <<_ACEOF ++{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 ++$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} ++as_write_fail=0 ++cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 + #! $SHELL + # Generated by $as_me. + # Run this file to recreate the current configuration. +@@ -2806,59 +3430,79 @@ + debug=false + ac_cs_recheck=false + ac_cs_silent=false +-SHELL=\${CONFIG_SHELL-$SHELL} +-_ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF +-## --------------------- ## +-## M4sh Initialization. ## +-## --------------------- ## ++SHELL=\${CONFIG_SHELL-$SHELL} ++export SHELL ++_ASEOF ++cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ++## -------------------- ## ++## M4sh Initialization. ## ++## -------------------- ## + + # Be more Bourne compatible + DUALCASE=1; export DUALCASE # for MKS sh +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST + else +- case `(set -o) 2>/dev/null` in +- *posix*) set -o posix ;; ++ case `(set -o) 2>/dev/null` in #( ++ *posix*) : ++ set -o posix ;; #( ++ *) : ++ ;; + esac +- + fi + + +- +- +-# PATH needs CR +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits +- +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' ++as_nl=' ++' ++export as_nl ++# Printing a long string crashes Solaris 7 /usr/bin/printf. ++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo ++# Prefer a ksh shell builtin over an external printf program on Solaris, ++# but without wasting forks for bash or zsh. ++if test -z "$BASH_VERSION$ZSH_VERSION" \ ++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='print -r --' ++ as_echo_n='print -rn --' ++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='printf %s\n' ++ as_echo_n='printf %s' ++else ++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then ++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ++ as_echo_n='/usr/ucb/echo -n' + else +- PATH_SEPARATOR=: ++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' ++ as_echo_n_body='eval ++ arg=$1; ++ case $arg in #( ++ *"$as_nl"*) ++ expr "X$arg" : "X\\(.*\\)$as_nl"; ++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; ++ esac; ++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ++ ' ++ export as_echo_n_body ++ as_echo_n='sh -c $as_echo_n_body as_echo' + fi +- rm -f conf$$.sh ++ export as_echo_body ++ as_echo='sh -c $as_echo_body as_echo' + fi + +-# Support unset when possible. +-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +- as_unset=unset +-else +- as_unset=false ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { ++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || ++ PATH_SEPARATOR=';' ++ } + fi + + +@@ -2867,20 +3511,18 @@ + # there to prevent editors from complaining about space-tab. + # (If _AS_PATH_WALK were called with IFS unset, it would disable word + # splitting by setting IFS to empty value.) +-as_nl=' +-' + IFS=" "" $as_nl" + + # Find who we are. Look in the path if we contain no directory separator. +-case $0 in ++case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++ done + IFS=$as_save_IFS + + ;; +@@ -2891,32 +3533,111 @@ + as_myself=$0 + fi + if test ! -f "$as_myself"; then +- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 +- { (exit 1); exit 1; } ++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ exit 1 + fi + +-# Work around bugs in pre-3.0 UWIN ksh. +-for as_var in ENV MAIL MAILPATH +-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++# Unset variables that we do not need and which cause bugs (e.g. in ++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" ++# suppresses any "Segmentation fault" message there. '((' could ++# trigger a bug in pdksh 5.2.14. ++for as_var in BASH_ENV ENV MAIL MAILPATH ++do eval test x\${$as_var+set} = xset \ ++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : + done + PS1='$ ' + PS2='> ' + PS4='+ ' + + # NLS nuisances. +-for as_var in \ +- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ +- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ +- LC_TELEPHONE LC_TIME +-do +- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then +- eval $as_var=C; export $as_var +- else +- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++LC_ALL=C ++export LC_ALL ++LANGUAGE=C ++export LANGUAGE ++ ++# CDPATH. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++ ++# as_fn_error STATUS ERROR [LINENO LOG_FD] ++# ---------------------------------------- ++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are ++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ++# script with STATUS, using 1 if that was 0. ++as_fn_error () ++{ ++ as_status=$1; test $as_status -eq 0 && as_status=1 ++ if test "$4"; then ++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi +-done ++ $as_echo "$as_me: error: $2" >&2 ++ as_fn_exit $as_status ++} # as_fn_error ++ ++ ++# as_fn_set_status STATUS ++# ----------------------- ++# Set $? to STATUS, without forking. ++as_fn_set_status () ++{ ++ return $1 ++} # as_fn_set_status ++ ++# as_fn_exit STATUS ++# ----------------- ++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. ++as_fn_exit () ++{ ++ set +e ++ as_fn_set_status $1 ++ exit $1 ++} # as_fn_exit ++ ++# as_fn_unset VAR ++# --------------- ++# Portably unset VAR. ++as_fn_unset () ++{ ++ { eval $1=; unset $1;} ++} ++as_unset=as_fn_unset ++# as_fn_append VAR VALUE ++# ---------------------- ++# Append the text in VALUE to the end of the definition contained in VAR. Take ++# advantage of any shell optimizations that allow amortized linear growth over ++# repeated appends, instead of the typical quadratic growth present in naive ++# implementations. ++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : ++ eval 'as_fn_append () ++ { ++ eval $1+=\$2 ++ }' ++else ++ as_fn_append () ++ { ++ eval $1=\$$1\$2 ++ } ++fi # as_fn_append ++ ++# as_fn_arith ARG... ++# ------------------ ++# Perform arithmetic evaluation on the ARGs, and store the result in the ++# global $as_val. Take advantage of shells that can avoid forks. The arguments ++# must be portable across $(()) and expr. ++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : ++ eval 'as_fn_arith () ++ { ++ as_val=$(( $* )) ++ }' ++else ++ as_fn_arith () ++ { ++ as_val=`expr "$@" || test $? -eq 1` ++ } ++fi # as_fn_arith ++ + +-# Required to use basename. + if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +@@ -2930,13 +3651,17 @@ + as_basename=false + fi + ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi + +-# Name of the executable. + as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +-echo X/"$0" | ++$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q +@@ -2951,104 +3676,103 @@ + } + s/.*/./; q'` + +-# CDPATH. +-$as_unset CDPATH +- +- +- +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { +- +- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO +- # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line after each line using $LINENO; the second 'sed' +- # does the real work. The second script uses 'N' to pair each +- # line-number line with the line containing $LINENO, and appends +- # trailing '-' during substitution so that $LINENO is not a special +- # case at line end. +- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # scripts with optimization help from Paolo Bonzini. Blame Lee +- # E. McMahon (1931-1989) for sed's syntax. :-) +- sed -n ' +- p +- /[$]LINENO/= +- ' <$as_myself | +- sed ' +- s/[$]LINENO.*/&-/ +- t lineno +- b +- :lineno +- N +- :loop +- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ +- t loop +- s/-\n.*// +- ' >$as_me.lineno && +- chmod +x "$as_me.lineno" || +- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 +- { (exit 1); exit 1; }; } +- +- # Don't try to exec as it changes $[0], causing all sort of problems +- # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensitive to this). +- . "./$as_me.lineno" +- # Exit status is that of the last command. +- exit +-} +- +- +-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then +- as_dirname=dirname +-else +- as_dirname=false +-fi ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits + + ECHO_C= ECHO_N= ECHO_T= +-case `echo -n x` in ++case `echo -n x` in #((((( + -n*) +- case `echo 'x\c'` in ++ case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. +- *) ECHO_C='\c';; ++ xy) ECHO_C='\c';; ++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ++ ECHO_T=' ';; + esac;; + *) + ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1 && +- test "X`expr 00001 : '.*\(...\)'`" = X001; then +- as_expr=expr +-else +- as_expr=false +-fi +- + rm -f conf$$ conf$$.exe conf$$.file + if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file + else + rm -f conf$$.dir +- mkdir conf$$.dir ++ mkdir conf$$.dir 2>/dev/null + fi +-echo >conf$$.file +-if ln -s conf$$.file conf$$ 2>/dev/null; then +- as_ln_s='ln -s' +- # ... but there are two gotchas: +- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. +- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. +- # In both cases, we have to default to `cp -p'. +- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++if (echo >conf$$.file) 2>/dev/null; then ++ if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++ elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++ else + as_ln_s='cp -p' +-elif ln conf$$.file conf$$ 2>/dev/null; then +- as_ln_s=ln ++ fi + else + as_ln_s='cp -p' + fi + rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file + rmdir conf$$.dir 2>/dev/null + ++ ++# as_fn_mkdir_p ++# ------------- ++# Create "$as_dir" as a directory, including parents if necessary. ++as_fn_mkdir_p () ++{ ++ ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || eval $as_mkdir_p || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" ++ ++ ++} # as_fn_mkdir_p + if mkdir -p . 2>/dev/null; then +- as_mkdir_p=: ++ as_mkdir_p='mkdir -p "$as_dir"' + else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +@@ -3065,12 +3789,12 @@ + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then +- test -d "$1/."; ++ test -d "$1/."; + else +- case $1 in +- -*)set "./$1";; ++ case $1 in #( ++ -*)set "./$1";; + esac; +- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +@@ -3085,13 +3809,19 @@ + + + exec 6>&1 ++## ----------------------------------- ## ++## Main body of $CONFIG_STATUS script. ## ++## ----------------------------------- ## ++_ASEOF ++test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +-# Save the log message, to keep $[0] and so on meaningful, and to ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# Save the log message, to keep $0 and so on meaningful, and to + # report actual input values of CONFIG_FILES etc. instead of their + # values after options handling. + ac_log=" + This file was extended by $as_me, which was +-generated by GNU Autoconf 2.61. Invocation command line was ++generated by GNU Autoconf 2.67. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS +@@ -3104,59 +3834,74 @@ + + _ACEOF + +-cat >>$CONFIG_STATUS <<_ACEOF ++case $ac_config_files in *" ++"*) set x $ac_config_files; shift; ac_config_files=$*;; ++esac ++ ++ ++ ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + # Files that config.status was made for. + config_files="$ac_config_files" + + _ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + ac_cs_usage="\ +-\`$as_me' instantiates files from templates according to the +-current configuration. ++\`$as_me' instantiates files and other configuration actions ++from templates according to the current configuration. Unless the files ++and actions are specified as TAGs, all are instantiated by default. + +-Usage: $0 [OPTIONS] [FILE]... ++Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit +- -q, --quiet do not print progress messages ++ --config print configuration, then exit ++ -q, --quiet, --silent ++ do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions +- --file=FILE[:TEMPLATE] +- instantiate the configuration file FILE ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE + + Configuration files: + $config_files + +-Report bugs to <bug-autoconf@gnu.org>." ++Report bugs to the package provider." + + _ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" + ac_cs_version="\\ + config.status +-configured by $0, generated by GNU Autoconf 2.61, +- with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" ++configured by $0, generated by GNU Autoconf 2.67, ++ with options \\"\$ac_cs_config\\" + +-Copyright (C) 2006 Free Software Foundation, Inc. ++Copyright (C) 2010 Free Software Foundation, Inc. + This config.status script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it." + + ac_pwd='$ac_pwd' + srcdir='$srcdir' ++test -n "\$AWK" || AWK=awk + _ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF +-# If no file are specified by the user, then we need to provide default +-# value. By we need to know if files were specified by the user. ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# The default lists apply if the user does not specify any file. + ac_need_defaults=: + while test $# != 0 + do + case $1 in +- --*=*) ++ --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; ++ --*=) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg= ++ ac_shift=: ++ ;; + *) + ac_option=$1 + ac_optarg=$2 +@@ -3169,25 +3914,30 @@ + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) +- echo "$ac_cs_version"; exit ;; ++ $as_echo "$ac_cs_version"; exit ;; ++ --config | --confi | --conf | --con | --co | --c ) ++ $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift +- CONFIG_FILES="$CONFIG_FILES $ac_optarg" ++ case $ac_optarg in ++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ '') as_fn_error $? "missing file argument" ;; ++ esac ++ as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) +- echo "$ac_cs_usage"; exit ;; ++ $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. +- -*) { echo "$as_me: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&2 +- { (exit 1); exit 1; }; } ;; ++ -*) as_fn_error $? "unrecognized option: \`$1' ++Try \`$0 --help' for more information." ;; + +- *) ac_config_targets="$ac_config_targets $1" ++ *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac +@@ -3202,30 +3952,32 @@ + fi + + _ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + if \$ac_cs_recheck; then +- echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 +- CONFIG_SHELL=$SHELL ++ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ shift ++ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 ++ CONFIG_SHELL='$SHELL' + export CONFIG_SHELL +- exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ exec "\$@" + fi + + _ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + exec 5>>config.log + { + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX + ## Running $as_me. ## + _ASBOX +- echo "$ac_log" ++ $as_echo "$ac_log" + } >&5 + + _ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + _ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + + # Handling of arguments. + for ac_config_target in $ac_config_targets +@@ -3233,9 +3985,7 @@ + case $ac_config_target in + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + +- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +-echo "$as_me: error: invalid argument: $ac_config_target" >&2;} +- { (exit 1); exit 1; }; };; ++ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;; + esac + done + +@@ -3260,7 +4010,7 @@ + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status + ' 0 +- trap '{ (exit 1); exit 1; }' 1 2 13 15 ++ trap 'as_fn_exit 1' 1 2 13 15 + } + # Create a (secure) tmp directory for tmp files. + +@@ -3271,145 +4021,177 @@ + { + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +-} || +-{ +- echo "$me: cannot create a temporary directory in ." >&2 +- { (exit 1); exit 1; } +-} +- +-# +-# Set up the sed scripts for CONFIG_FILES section. +-# ++} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 + +-# No need to generate the scripts if there are no CONFIG_FILES. +-# This happens for instance when ./config.status config.h ++# Set up the scripts for CONFIG_FILES section. ++# No need to generate them if there are no CONFIG_FILES. ++# This happens for instance with `./config.status config.h'. + if test -n "$CONFIG_FILES"; then + +-_ACEOF + ++ac_cr=`echo X | tr X '\015'` ++# On cygwin, bash can eat \r inside `` if the user requested igncr. ++# But we know of no other shell where ac_cr would be empty at this ++# point, so we can use a bashism as a fallback. ++if test "x$ac_cr" = x; then ++ eval ac_cr=\$\'\\r\' ++fi ++ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` ++if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ++ ac_cs_awk_cr='\\r' ++else ++ ac_cs_awk_cr=$ac_cr ++fi ++ ++echo 'BEGIN {' >"$tmp/subs1.awk" && ++_ACEOF + + ++{ ++ echo "cat >conf$$subs.awk <<_ACEOF" && ++ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && ++ echo "_ACEOF" ++} >conf$$subs.sh || ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ++ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` + ac_delim='%!_!# ' + for ac_last_try in false false false false false :; do +- cat >conf$$subs.sed <<_ACEOF +-SHELL!$SHELL$ac_delim +-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim +-PACKAGE_NAME!$PACKAGE_NAME$ac_delim +-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim +-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim +-PACKAGE_STRING!$PACKAGE_STRING$ac_delim +-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim +-exec_prefix!$exec_prefix$ac_delim +-prefix!$prefix$ac_delim +-program_transform_name!$program_transform_name$ac_delim +-bindir!$bindir$ac_delim +-sbindir!$sbindir$ac_delim +-libexecdir!$libexecdir$ac_delim +-datarootdir!$datarootdir$ac_delim +-datadir!$datadir$ac_delim +-sysconfdir!$sysconfdir$ac_delim +-sharedstatedir!$sharedstatedir$ac_delim +-localstatedir!$localstatedir$ac_delim +-includedir!$includedir$ac_delim +-oldincludedir!$oldincludedir$ac_delim +-docdir!$docdir$ac_delim +-infodir!$infodir$ac_delim +-htmldir!$htmldir$ac_delim +-dvidir!$dvidir$ac_delim +-pdfdir!$pdfdir$ac_delim +-psdir!$psdir$ac_delim +-libdir!$libdir$ac_delim +-localedir!$localedir$ac_delim +-mandir!$mandir$ac_delim +-DEFS!$DEFS$ac_delim +-ECHO_C!$ECHO_C$ac_delim +-ECHO_N!$ECHO_N$ac_delim +-ECHO_T!$ECHO_T$ac_delim +-LIBS!$LIBS$ac_delim +-build_alias!$build_alias$ac_delim +-host_alias!$host_alias$ac_delim +-target_alias!$target_alias$ac_delim +-CC!$CC$ac_delim +-CFLAGS!$CFLAGS$ac_delim +-LDFLAGS!$LDFLAGS$ac_delim +-CPPFLAGS!$CPPFLAGS$ac_delim +-ac_ct_CC!$ac_ct_CC$ac_delim +-EXEEXT!$EXEEXT$ac_delim +-OBJEXT!$OBJEXT$ac_delim +-eap_tnc_cflags!$eap_tnc_cflags$ac_delim +-eap_tnc_ldflags!$eap_tnc_ldflags$ac_delim +-targetname!$targetname$ac_delim +-LIBOBJS!$LIBOBJS$ac_delim +-LTLIBOBJS!$LTLIBOBJS$ac_delim +-_ACEOF ++ . ./conf$$subs.sh || ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + +- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 49; then ++ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` ++ if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then +- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi + done ++rm -f conf$$subs.sh + +-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +-if test -n "$ac_eof"; then +- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` +- ac_eof=`expr $ac_eof + 1` +-fi +- +-cat >>$CONFIG_STATUS <<_ACEOF +-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof +-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end +-_ACEOF +-sed ' +-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +-s/^/s,@/; s/!/@,|#_!!_#|/ +-:n +-t n +-s/'"$ac_delim"'$/,g/; t +-s/$/\\/; p +-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +-' >>$CONFIG_STATUS <conf$$subs.sed +-rm -f conf$$subs.sed +-cat >>$CONFIG_STATUS <<_ACEOF +-:end +-s/|#_!!_#|//g +-CEOF$ac_eof ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++cat >>"\$tmp/subs1.awk" <<\\_ACAWK && + _ACEOF ++sed -n ' ++h ++s/^/S["/; s/!.*/"]=/ ++p ++g ++s/^[^!]*!// ++:repl ++t repl ++s/'"$ac_delim"'$// ++t delim ++:nl ++h ++s/\(.\{148\}\)..*/\1/ ++t more1 ++s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ ++p ++n ++b repl ++:more1 ++s/["\\]/\\&/g; s/^/"/; s/$/"\\/ ++p ++g ++s/.\{148\}// ++t nl ++:delim ++h ++s/\(.\{148\}\)..*/\1/ ++t more2 ++s/["\\]/\\&/g; s/^/"/; s/$/"/ ++p ++b ++:more2 ++s/["\\]/\\&/g; s/^/"/; s/$/"\\/ ++p ++g ++s/.\{148\}// ++t delim ++' <conf$$subs.awk | sed ' ++/^[^""]/{ ++ N ++ s/\n// ++} ++' >>$CONFIG_STATUS || ac_write_fail=1 ++rm -f conf$$subs.awk ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++_ACAWK ++cat >>"\$tmp/subs1.awk" <<_ACAWK && ++ for (key in S) S_is_set[key] = 1 ++ FS = "" ++ ++} ++{ ++ line = $ 0 ++ nfields = split(line, field, "@") ++ substed = 0 ++ len = length(field[1]) ++ for (i = 2; i < nfields; i++) { ++ key = field[i] ++ keylen = length(key) ++ if (S_is_set[key]) { ++ value = S[key] ++ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) ++ len += length(value) + length(field[++i]) ++ substed = 1 ++ } else ++ len += 1 + keylen ++ } ++ ++ print line ++} + ++_ACAWK ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then ++ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" ++else ++ cat ++fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ ++ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 ++_ACEOF + +-# VPATH may cause trouble with some makes, so we remove $(srcdir), +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# VPATH may cause trouble with some makes, so we remove sole $(srcdir), ++# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and + # trailing colons and then remove the whole line if VPATH becomes empty + # (actually we leave an empty line to preserve line numbers). + if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=/{ +-s/:*\$(srcdir):*/:/ +-s/:*\${srcdir}:*/:/ +-s/:*@srcdir@:*/:/ +-s/^\([^=]*=[ ]*\):*/\1/ ++ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ ++h ++s/// ++s/^/:/ ++s/[ ]*$/:/ ++s/:\$(srcdir):/:/g ++s/:\${srcdir}:/:/g ++s/:@srcdir@:/:/g ++s/^:*// + s/:*$// ++x ++s/\(=[ ]*\).*/\1/ ++G ++s/\n// + s/^[^=]*=[ ]*$// + }' + fi + +-cat >>$CONFIG_STATUS <<\_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + fi # test -n "$CONFIG_FILES" + + +-for ac_tag in :F $CONFIG_FILES ++eval set X " :F $CONFIG_FILES " ++shift ++for ac_tag + do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; +- :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +-echo "$as_me: error: Invalid tag $ac_tag." >&2;} +- { (exit 1); exit 1; }; };; ++ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac +@@ -3437,26 +4219,34 @@ + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || +- { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +-echo "$as_me: error: cannot find input file: $ac_f" >&2;} +- { (exit 1); exit 1; }; };; ++ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;; + esac +- ac_file_inputs="$ac_file_inputs $ac_f" ++ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac ++ as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ +- configure_input="Generated from "`IFS=: +- echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ configure_input='Generated from '` ++ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' ++ `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" +- { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 ++$as_echo "$as_me: creating $ac_file" >&6;} + fi ++ # Neutralize special characters interpreted by sed in replacement strings. ++ case $configure_input in #( ++ *\&* | *\|* | *\\* ) ++ ac_sed_conf_input=`$as_echo "$configure_input" | ++ sed 's/[\\\\&|]/\\\\&/g'`;; #( ++ *) ac_sed_conf_input=$configure_input;; ++ esac + + case $ac_tag in +- *:-:* | *:-) cat >"$tmp/stdin";; ++ *:-:* | *:-) cat >"$tmp/stdin" \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac +@@ -3466,42 +4256,7 @@ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +-echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- { as_dir="$ac_dir" +- case $as_dir in #( +- -*) as_dir=./$as_dir;; +- esac +- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { +- as_dirs= +- while :; do +- case $as_dir in #( +- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( +- *) as_qdir=$as_dir;; +- esac +- as_dirs="'$as_qdir' $as_dirs" +- as_dir=`$as_dirname -- "$as_dir" || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +-echo X"$as_dir" | ++$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q +@@ -3519,20 +4274,15 @@ + q + } + s/.*/./; q'` +- test -d "$as_dir" && break +- done +- test -z "$as_dirs" || eval "mkdir $as_dirs" +- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +-echo "$as_me: error: cannot create directory $as_dir" >&2;} +- { (exit 1); exit 1; }; }; } ++ as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + + case "$ac_dir" in + .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. +- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; +@@ -3568,12 +4318,12 @@ + + _ACEOF + +-cat >>$CONFIG_STATUS <<\_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + # If the template does not know about datarootdir, expand it. + # FIXME: This hack should be removed a few years after 2.60. + ac_datarootdir_hack=; ac_datarootdir_seen= +- +-case `sed -n '/datarootdir/ { ++ac_sed_dataroot=' ++/datarootdir/ { + p + q + } +@@ -3581,36 +4331,37 @@ + /@docdir@/p + /@infodir@/p + /@localedir@/p +-/@mandir@/p +-' $ac_file_inputs` in ++/@mandir@/p' ++case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in + *datarootdir*) ac_datarootdir_seen=yes;; + *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) +- { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} + _ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g +- s&\\\${datarootdir}&$datarootdir&g' ;; ++ s&\\\${datarootdir}&$datarootdir&g' ;; + esac + _ACEOF + + # Neutralize VPATH when `$srcdir' = `.'. + # Shell code in configure.ac might set extrasub. + # FIXME: do we really want to maintain this feature? +-cat >>$CONFIG_STATUS <<_ACEOF +- sed "$ac_vpsub ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ac_sed_extra="$ac_vpsub + $extrasub + _ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + :t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-s&@configure_input@&$configure_input&;t t ++s|@configure_input@|$ac_sed_conf_input|;t t + s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@top_build_prefix@&$ac_top_build_prefix&;t t + s&@srcdir@&$ac_srcdir&;t t + s&@abs_srcdir@&$ac_abs_srcdir&;t t + s&@top_srcdir@&$ac_top_srcdir&;t t +@@ -3619,21 +4370,24 @@ + s&@abs_builddir@&$ac_abs_builddir&;t t + s&@abs_top_builddir@&$ac_abs_top_builddir&;t t + $ac_datarootdir_hack +-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out ++" ++eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + + test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && +- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +-which seems to be undefined. Please make sure it is defined." >&5 +-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +-which seems to be undefined. Please make sure it is defined." >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined" >&5 ++$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$tmp/stdin" + case $ac_file in +- -) cat "$tmp/out"; rm -f "$tmp/out";; +- *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; +- esac ++ -) cat "$tmp/out" && rm -f "$tmp/out";; ++ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; ++ esac \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + + +@@ -3643,11 +4397,13 @@ + done # for ac_tag + + +-{ (exit 0); exit 0; } ++as_fn_exit 0 + _ACEOF +-chmod +x $CONFIG_STATUS + ac_clean_files=$ac_clean_files_save + ++test $ac_write_fail = 0 || ++ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 ++ + + # configure is writing to config.log, and then calls config.status. + # config.status does its own redirection, appending to config.log. +@@ -3667,7 +4423,10 @@ + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. +- $ac_cs_success || { (exit 1); exit 1; } ++ $ac_cs_success || as_fn_exit 1 ++fi ++if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 ++$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} + fi +- + +diff -u -r -N freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/configure.in freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/configure.in +--- freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/configure.in 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/configure.in 2012-12-04 19:38:00.241420966 +0100 +@@ -2,12 +2,21 @@ + AC_REVISION($Revision$) + AC_DEFUN(modname,[rlm_eap_tnc]) + ++eap_tnc_cflags= ++eap_tnc_ldflags=-lnaaeap ++ + if test x$with_[]modname != xno; then + +- AC_CHECK_LIB(TNCS, exchangeTNCCSMessages) +- if test "x$ac_cv_lib_tncs_exchangetnccsmessages" != xyes; then +- AC_MSG_WARN([the TNCS library isn't found!]) +- fail="$fail -lTNCS" ++ AC_CHECK_LIB(naaeap,processEAPTNCData,,fail="$fail -lnaaeap",) ++ if test -x"$ac_cv_lib_NAAEAP_processEAPTNCData" == -x"no"; then ++ AC_MSG_WARN([the NAAEAP library was not found!]) ++ fail="$fail -lNAAEAP" ++ fi ++ ++ AC_CHECK_HEADERS(naaeap/naaeap.h,,fail="$fail -Inaaeap.h",) ++ if test -x"$ac_cv_header_naaeap_h" == -x"no"; then ++ AC_MSG_WARN([the naaeap header was not found!]) ++ fail="$fail -Inaaeap.h" + fi + + targetname=modname +diff -u -r -N freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/eap_tnc.c freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/eap_tnc.c +--- freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/eap_tnc.c 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/eap_tnc.c 2012-12-04 19:38:00.241420966 +0100 +@@ -1,12 +1,12 @@ + /* + * eap_tnc.c EAP TNC functionality. + * +- * This software is Copyright (C) 2006,2007 FH Hannover ++ * This software is Copyright (C) 2006-2009 FH Hannover + * + * Portions of this code unrelated to FreeRADIUS are available + * separately under a commercial license. If you require an + * implementation of EAP-TNC that is not under the GPLv2, please +- * contact tnc@inform.fh-hannover.de for details. ++ * contact trust@f4-i.fh-hannover.de for details. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by +@@ -23,230 +23,41 @@ + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA + * + */ +-#include <freeradius-devel/ident.h> +-RCSID("$Id$") +- +- +-/* +- * +- * MD5 Packet Format in EAP Type-Data +- * --- ------ ------ -- --- --------- +- * 0 1 2 3 +- * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +- * | Value-Size | Value ... +- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +- * | Name ... +- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +- * +- * EAP-TNC Packet Format in EAP Type-Data +- * +- * 0 1 2 3 +- * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +- * | Flags |Ver | Data Length ... +- * |L M S R R|=1 | +- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +- * |... | Data ... +- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +- +- * +- */ +- + #include <stdio.h> + #include <stdlib.h> + #include "eap.h" + + #include "eap_tnc.h" + +- /* +- * WTF is wrong with htonl ? +- */ +-static uint32_t ByteSwap2 (uint32_t nLongNumber) +-{ +- return (((nLongNumber&0x000000FF)<<24)+((nLongNumber&0x0000FF00)<<8)+ +- ((nLongNumber&0x00FF0000)>>8)+((nLongNumber&0xFF000000)>>24)); +-} +- + /* +- * Allocate a new TNC_PACKET ++ * Forms an EAP_REQUEST packet from the EAP_TNC specific data. + */ +-TNC_PACKET *eaptnc_alloc(void) ++int eaptnc_compose(EAP_HANDLER *handler, TNC_BufferReference request, TNC_UInt32 length, uint8_t code) + { +- TNC_PACKET *rp; +- +- if ((rp = malloc(sizeof(TNC_PACKET))) == NULL) { +- radlog(L_ERR, "rlm_eap_tnc: out of memory"); +- return NULL; ++ // check parameters ++ if(handler == NULL || (request == NULL && length != 0) || (request != NULL && length < 1) || code > PW_EAP_MAX_CODES){ ++ radlog(L_ERR, "rlm_eap_tnc: eaptnc_compose invalid parameters: handler == %p, request == %p, length == %lu, code == %u", handler, request, length, code); ++ return 0; + } +- memset(rp, 0, sizeof(TNC_PACKET)); +- return rp; +-} +- +-/* +- * Free TNC_PACKET +- */ +-void eaptnc_free(TNC_PACKET **tnc_packet_ptr) +-{ +- TNC_PACKET *tnc_packet; +- +- if (!tnc_packet_ptr) return; +- tnc_packet = *tnc_packet_ptr; +- if (tnc_packet == NULL) return; +- +- if (tnc_packet->data) free(tnc_packet->data); + +- free(tnc_packet); +- +- *tnc_packet_ptr = NULL; +-} +- +-/* +- * We expect only RESPONSE for which REQUEST, SUCCESS or FAILURE is sent back +- */ +-TNC_PACKET *eaptnc_extract(EAP_DS *eap_ds) +-{ +- tnc_packet_t *data; +- TNC_PACKET *packet; +- /* +- * We need a response, of type EAP-TNC +- */ +- if (!eap_ds || +- !eap_ds->response || +- (eap_ds->response->code != PW_TNC_RESPONSE) || +- eap_ds->response->type.type != PW_EAP_TNC || +- !eap_ds->response->type.data || +- (eap_ds->response->length <= TNC_HEADER_LEN) || +- (eap_ds->response->type.data[0] <= 0)) { +- radlog(L_ERR, "rlm_eap_tnc: corrupted data"); +- return NULL; ++ // further check parameters ++ if(handler->opaque == NULL || handler->eap_ds == NULL){ ++ radlog(L_ERR, "rlm_eap_tnc: eaptnc_compose invalid parameters: handler->opaque == %p, handler->eap_ds == %p", handler->opaque, handler->eap_ds); ++ return 0; + } +- packet = eaptnc_alloc(); +- if (!packet) return NULL; +- + +- packet->code = eap_ds->response->code; +- packet->id = eap_ds->response->id; +- packet->length = eap_ds->response->length; +- +- data = (tnc_packet_t *)eap_ds->response->type.data; +- /* +- * Already checked the size above. +- */ +- packet->flags_ver = data->flags_ver; +- unsigned char *ptr = (unsigned char*)data; +- +- +- DEBUG2("Flags/Ver: %x\n", packet->flags_ver); +- int thisDataLength; +- int dataStart; +- if(TNC_LENGTH_INCLUDED(packet->flags_ver)){ +- DEBUG2("data_length included\n"); +-// memcpy(&packet->flags_ver[1], &data->flags_ver[1], 4); +- //packet->data_length = data->data_length; +- memcpy(&packet->data_length, &ptr[1], TNC_DATA_LENGTH_LENGTH); +- DEBUG2("data_length: %x\n", packet->data_length); +- DEBUG2("data_length: %d\n", packet->data_length); +- DEBUG2("data_length: %x\n", ByteSwap2(packet->data_length)); +- DEBUG2("data_length: %d\n", ByteSwap2(packet->data_length)); +- packet->data_length = ByteSwap2(packet->data_length); +- thisDataLength = packet->length-TNC_PACKET_LENGTH; //1: we need space for flags_ver +- dataStart = TNC_DATA_LENGTH_LENGTH+TNC_FLAGS_VERSION_LENGTH; +- }else{ +- DEBUG2("no data_length included\n"); +- thisDataLength = packet->length-TNC_PACKET_LENGTH_WITHOUT_DATA_LENGTH; +- packet->data_length = 0; +- dataStart = TNC_FLAGS_VERSION_LENGTH; +- +- } +- /* +- * Allocate room for the data, and copy over the data. +- */ +- packet->data = malloc(thisDataLength); +- if (packet->data == NULL) { +- radlog(L_ERR, "rlm_eap_tnc: out of memory"); +- eaptnc_free(&packet); +- return NULL; ++ if(handler->eap_ds->request == NULL){ ++ radlog(L_ERR, "rlm_eap_tnc: eaptnc_compose invalid parameters: handler->eap_ds->request == %p", handler->eap_ds->request); ++ return 0; + } +- +- memcpy(packet->data, &(eap_ds->response->type.data[dataStart]), thisDataLength); +- +- return packet; +-} + +- +-/* +- * Compose the portions of the reply packet specific to the +- * EAP-TNC protocol, in the EAP reply typedata +- */ +-int eaptnc_compose(EAP_DS *eap_ds, TNC_PACKET *reply) +-{ +- uint8_t *ptr; +- +- +- if (reply->code < 3) { +- //fill: EAP-Type (0x888e) +- eap_ds->request->type.type = PW_EAP_TNC; +- DEBUG2("TYPE: EAP-TNC set\n"); +- rad_assert(reply->length > 0); +- +- //alloc enough space for whole TNC-Packet (from Code on) +- eap_ds->request->type.data = calloc(reply->length, sizeof(unsigned char*)); +- DEBUG2("Malloc %d bytes for packet\n", reply->length); +- if (eap_ds->request->type.data == NULL) { +- radlog(L_ERR, "rlm_eap_tnc: out of memory"); +- return 0; +- } +- //put pointer at position where data starts (behind Type) +- ptr = eap_ds->request->type.data; +- //*ptr = (uint8_t)(reply->data_length & 0xFF); +- +- //ptr++; +- *ptr = reply->flags_ver; +- DEBUG2("Set Flags/Version: %d\n", *ptr); +- if(reply->data_length!=0){ +- DEBUG2("Set data-length: %d\n", reply->data_length); +- ptr++; //move to start-position of "data_length" +- DEBUG2("Set data-length: %x\n", reply->data_length); +- DEBUG2("Set data-length (swapped): %x\n", ByteSwap2(reply->data_length)); +- unsigned long swappedDataLength = ByteSwap2(reply->data_length); +- //DEBUG2("DATA-length: %d", reply->data_ +- memcpy(ptr, &swappedDataLength, 4); +- //*ptr = swappedDataLength; +- } +- uint16_t thisDataLength=0; +- if(reply->data!=NULL){ +- DEBUG2("Adding TNCCS-Data "); +- int offset; +- //if data_length-Field present +- if(reply->data_length !=0){ +- DEBUG2("with Fragmentation\n"); +- offset = TNC_DATA_LENGTH_LENGTH; //length of data_length-field: 4 +- thisDataLength = reply->length-TNC_PACKET_LENGTH; +- }else{ //data_length-Field not present +- DEBUG2("without Fragmentation\n"); +- offset = 1; +- thisDataLength = reply->length-TNC_PACKET_LENGTH_WITHOUT_DATA_LENGTH; +- } +- DEBUG2("TNCCS-Datalength: %d\n", thisDataLength); +- ptr=ptr+offset; //move to start-position of "data" +- memcpy(ptr,reply->data, thisDataLength); +- }else{ +- DEBUG2("No TNCCS-Data present"); +- } +- +- //the length of the TNC-packet (behind Type) +- if(reply->data_length!=0){ +- eap_ds->request->type.length = TNC_DATA_LENGTH_LENGTH+TNC_FLAGS_VERSION_LENGTH+thisDataLength; //4:data_length, 1: flags_ver +- }else{ +- eap_ds->request->type.length = TNC_FLAGS_VERSION_LENGTH+thisDataLength; //1: flags_ver +- } +- DEBUG2("Packet built\n"); +- +- } else { +- eap_ds->request->type.length = 0; +- } +- eap_ds->request->code = reply->code; ++ // fill EAP data to handler ++ handler->eap_ds->request->code = code; ++ handler->eap_ds->request->type.type = PW_EAP_TNC; ++ // fill EAP TYPE specific data to handler ++ handler->eap_ds->request->type.length = length; ++ free(handler->eap_ds->request->type.data); ++ handler->eap_ds->request->type.data = request; + + return 1; + } +diff -u -r -N freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/eap_tnc.h freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/eap_tnc.h +--- freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/eap_tnc.h 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/eap_tnc.h 2012-12-04 19:38:00.241420966 +0100 +@@ -1,10 +1,10 @@ + /* +- * This software is Copyright (C) 2006,2007 FH Hannover ++ * This software is Copyright (C) 2006-2009 FH Hannover + * + * Portions of this code unrelated to FreeRADIUS are available + * separately under a commercial license. If you require an + * implementation of EAP-TNC that is not under the GPLv2, please +- * contact tnc@inform.fh-hannover.de for details. ++ * contact trust@f4-i.fh-hannover.de for details. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by +@@ -26,105 +26,20 @@ + #define _EAP_TNC_H + + #include "eap.h" ++#include <naaeap/naaeap.h> + +-#define PW_TNC_REQUEST 1 +-#define PW_TNC_RESPONSE 2 +-#define PW_TNC_SUCCESS 3 +-#define PW_TNC_FAILURE 4 +-#define PW_TNC_MAX_CODES 4 +- +-#define TNC_HEADER_LEN 4 +-#define TNC_CHALLENGE_LEN 16 +-#define TNC_START_LEN 8 +- +-#define TNC_PACKET_LENGTH_WITHOUT_DATA_LENGTH 6 +-#define TNC_PACKET_LENGTH 10 +-#define TNC_DATA_LENGTH_LENGTH 4 +-#define TNC_FLAGS_VERSION_LENGTH 1 +- +-typedef unsigned int VlanAccessMode; +- +-#define VLAN_ISOLATE 97 +-#define VLAN_ACCESS 2 +-/* +- **** +- * EAP - MD5 doesnot specify code, id & length but chap specifies them, +- * for generalization purpose, complete header should be sent +- * and not just value_size, value and name. +- * future implementation. +- * +- * Huh? What does that mean? +- */ ++#define SET_START(x) ((x) | (0x20)) + +-/* ++/** ++ * Composes the EAP packet. + * +- * MD5 Packet Format in EAP Type-Data +- * --- ------ ------ -- --- --------- +- * 0 1 2 3 +- * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +- * | Value-Size | Value ... +- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +- * | Name ... +- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +- * +- * EAP-TNC Packet Format in EAP Type-Data +- * +- * 0 1 2 3 +- * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +- * | Flags |Ver | Data Length ... +- * |L M S R R|=1 | +- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +- * |... | Data ... +- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +- ++ * @param handler The EAP_HANDLER from tnc_initiate() or tnc_authenticate ++ * @param request The EAP_TNC packet received from NAA-TNCS ++ * @param length The length of the EAP_TNC packet received from NAA-TNCS ++ * @param code EAP_CODE for the request + * ++ * @return True if operation was successful, otherwise false. + */ +- +-/* eap packet structure */ +-typedef struct tnc_packet_t { +-/* +- uint8_t code; +- uint8_t id; +- uint16_t length; +-*/ +- uint8_t flags_ver; +- uint32_t data_length; +- uint8_t *data; +-} tnc_packet_t; +- +-typedef struct tnc_packet { +- uint8_t code; +- uint8_t id; +- uint16_t length; +- uint8_t flags_ver; +- uint32_t data_length; +- uint8_t *data; +-} TNC_PACKET; +- +-#define TNC_START(x) (((x) & 0x20) != 0) +-#define TNC_MORE_FRAGMENTS(x) (((x) & 0x40) != 0) +-#define TNC_LENGTH_INCLUDED(x) (((x) & 0x80) != 0) +-#define TNC_RESERVED_EQ_NULL(x) (((x) & 0x10) == 0 && ((x) & 0x8) == 0) +-#define TNC_VERSION_EQ_ONE(x) (((x) & 0x07) == 1) +- +-#define SET_START(x) ((x) | (0x20)) +-#define SET_MORE_FRAGMENTS(x) ((x) | (0x40)) +-#define SET_LENGTH_INCLUDED(x) ((x) | (0x80)) +- +- +-/* function declarations here */ +- +-TNC_PACKET *eaptnc_alloc(void); +-void eaptnc_free(TNC_PACKET **tnc_packet_ptr); +- +-int eaptnc_compose(EAP_DS *auth, TNC_PACKET *reply); +-TNC_PACKET *eaptnc_extract(EAP_DS *auth); +-int eaptnc_verify(TNC_PACKET *pkt, VALUE_PAIR* pwd, uint8_t *ch); +- +- +- +- ++int eaptnc_compose(EAP_HANDLER *handler, TNC_BufferReference request, TNC_UInt32 length, uint8_t code); + + #endif /*_EAP_TNC_H*/ +diff -u -r -N freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/Makefile.in freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/Makefile.in +--- freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/Makefile.in 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/Makefile.in 2012-12-04 19:38:49.277421870 +0100 +@@ -3,8 +3,8 @@ + # + + TARGET = @targetname@ +-SRCS = rlm_eap_tnc.c eap_tnc.c tncs_connect.c +-HEADERS = eap_tnc.h tncs.h tncs_connect.h ../../eap.h ../../rlm_eap.h ++SRCS = rlm_eap_tnc.c eap_tnc.c ++HEADERS = eap_tnc.h ../../eap.h ../../rlm_eap.h + RLM_CFLAGS = -I../.. -I../../libeap $(OPENSSL_INCLUDE) @eap_tnc_cflags@ + RLM_LIBS = @eap_tnc_ldflags@ ../../libeap/$(LIBPREFIX)freeradius-eap.la $(OPENSSL_LIBS) + RLM_INSTALL = +diff -u -r -N freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/rlm_eap_tnc.c freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/rlm_eap_tnc.c +--- freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/rlm_eap_tnc.c 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/rlm_eap_tnc.c 2012-12-04 19:38:00.241420966 +0100 +@@ -1,12 +1,12 @@ + /* + * rlm_eap_tnc.c Handles that are called from eap + * +- * This software is Copyright (C) 2006,2007 FH Hannover ++ * This software is Copyright (C) 2006-2009 FH Hannover + * + * Portions of this code unrelated to FreeRADIUS are available + * separately under a commercial license. If you require an + * implementation of EAP-TNC that is not under the GPLv2, please +- * contact tnc@inform.fh-hannover.de for details. ++ * contact trust@f4-i.fh-hannover.de for details. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by +@@ -26,96 +26,262 @@ + * Copyright (C) 2007 Alan DeKok <aland@deployingradius.com> + */ + +-#include <freeradius-devel/ident.h> +-RCSID("$Id$") ++/* ++ * EAP-TNC Packet with EAP Header, general structure ++ * ++ * 0 1 2 3 ++ * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 ++ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ++ * | Code | Identifier | Length | ++ * | | | | ++ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ++ * | Type | Flags | Ver | Data Length | ++ * | |L M S R R| =1 | | ++ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ++ * | Data Length | Data ... ++ * | | ++ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ++ */ + + #include <freeradius-devel/autoconf.h> + + #include <stdio.h> + #include <stdlib.h> + +-#include "tncs_connect.h" + #include "eap_tnc.h" +-#include "tncs.h" ++#include <naaeap/naaeap.h> + #include <freeradius-devel/rad_assert.h> ++//#include <freeradius-devel/libradius.h> + +-typedef struct rlm_eap_tnc_t { +- char *vlan_access; +- char *vlan_isolate; +- char *tnc_path; +-} rlm_eap_tnc_t; ++#include <netinet/in.h> + +-static int sessionCounter=0; ++/** ++ * Calculates an identifying string based upon nas_port, nas_ip and nas_port_type. ++ * The maximum length of the calculated string is 70 (not including the trailing '\0'). ++ * ++ * @return the number of bytes written to out (not including the trailing '\0') ++ */ ++static uint32_t calculateConnectionString(RADIUS_PACKET* radius_packet, char *out, size_t outMaxLength) ++{ ++ VALUE_PAIR *vp = NULL; ++ uint32_t nas_port = 0; ++ uint32_t nas_ip = 0; ++ uint32_t nas_port_type = 0; ++ ++ char out_nas_port[11]; ++ char out_nas_ip_byte_0[4]; ++ char out_nas_ip_byte_1[4]; ++ char out_nas_ip_byte_2[4]; ++ char out_nas_ip_byte_3[4]; ++ char out_nas_port_type[11]; ++ ++ // check for NULL ++ if (radius_packet == NULL) { ++ radlog(L_ERR, ++ "rlm_eap_tnc: calculateConnectionString failed. radius_packet == NULL!"); ++ return 0; ++ } ++ ++ // read NAS port, ip and port type ++ for (vp = radius_packet->vps; vp; vp=vp->next) { ++ switch (vp->attribute) { ++ case PW_NAS_PORT: ++ nas_port = vp->vp_integer; ++ DEBUG("NAS scr port = %u\n", nas_port); ++ break; ++ case PW_NAS_IP_ADDRESS: ++ nas_ip = vp->vp_ipaddr; ++ DEBUG("NAS scr ip = %X\n", ntohl(nas_ip)); ++ break; ++ case PW_NAS_PORT_TYPE: ++ nas_port_type = vp->vp_integer; ++ DEBUG("NAS scr port type = %u\n", nas_port_type); ++ break; ++ } ++ } ++ ++ snprintf(out_nas_port, 11, "%u", nas_port); ++ snprintf(out_nas_ip_byte_0, 4, "%u", nas_ip & 0xFF); ++ snprintf(out_nas_ip_byte_1, 4, "%u", (nas_ip >> 8) & 0xFF); ++ snprintf(out_nas_ip_byte_2, 4, "%u", (nas_ip >> 16) & 0xFF); ++ snprintf(out_nas_ip_byte_3, 4, "%u", (nas_ip >> 24) & 0xFF); ++ snprintf(out_nas_port_type, 11, "%u", nas_port_type); ++ ++ return snprintf(out, outMaxLength, "NAS Port: %s NAS IP: %s.%s.%s.%s NAS_PORT_TYPE: %s", out_nas_port, out_nas_ip_byte_3, out_nas_ip_byte_2, out_nas_ip_byte_1, out_nas_ip_byte_0, out_nas_port_type); ++} ++ ++/* ++ * This function is called when the FreeRADIUS attach this module. ++ */ ++static int tnc_attach(CONF_SECTION *conf, void **type_data) ++{ ++ // initialize NAA-EAP ++ DEBUG2("TNC-ATTACH initializing NAA-EAP"); ++ TNC_Result result = initializeDefault(); ++ if (result != TNC_RESULT_SUCCESS) { ++ radlog(L_ERR, ++ "rlm_eap_tnc: tnc_attach error while calling NAA-EAP initializeDefault()"); ++ return -1; ++ } ++ return 0; ++} ++ ++/* ++ * This function is called when the FreeRADIUS detach this module. ++ */ ++static int tnc_detach(void *args) ++{ ++ // terminate NAA-EAP ++ DEBUG2("TNC-TERMINATE terminating NAA-EAP"); ++ TNC_Result result = terminate(); ++ if (result != TNC_RESULT_SUCCESS) { ++ radlog(L_ERR, ++ "rlm_eap_tnc: tnc_attach error while calling NAA-EAP terminate()"); ++ return -1; ++ } ++ return 0; ++} + + /* +- * Initiate the EAP-MD5 session by sending a challenge to the peer. +- * Initiate the EAP-TNC session by sending a EAP Request witch Start Bit set +- * and with no data ++ * This function is called when the first EAP_IDENTITY_RESPONSE message ++ * was received. ++ * ++ * Initiates the EPA_TNC session by sending the first EAP_TNC_RESPONSE ++ * to the peer. The packet has the Start-Bit set and contains no data. ++ * ++ * 0 1 2 3 ++ * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 ++ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ++ * | Code | Identifier | Length | ++ * | | | | ++ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ++ * | Type | Flags | Ver | ++ * | |0 0 1 0 0|0 0 1| ++ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ++ * ++ * For this package, only 'Identifier' has to be set dynamically. Any ++ * other information is static. + */ + static int tnc_initiate(void *type_data, EAP_HANDLER *handler) + { +- uint8_t flags_ver = 1; //set version to 1 +- rlm_eap_tnc_t *inst = type_data; +- TNC_PACKET *reply; ++ size_t buflen = 71; ++ size_t ret = 0; ++ char buf[buflen]; ++ REQUEST * request = NULL; ++ TNC_Result result; ++ TNC_ConnectionID conID; ++ TNC_BufferReference username; + ++ // check if we run inside a secure EAP method. ++ // FIXME check concrete outer EAP method + if (!handler->request || !handler->request->parent) { +- DEBUG("rlm_eap_tnc: EAP-TNC can only be run inside of a TLS-based method."); ++ DEBUG2("rlm_eap_tnc: EAP_TNC must only be used as an inner method within a protected tunneled EAP created by an outer EAP method."); ++ request = handler->request; + return 0; ++ } else { ++ request = handler->request->parent; + } + +- /* +- * FIXME: Update this when the TTLS and PEAP methods can +- * run EAP-TLC *after* the user has been authenticated. +- * This likely means moving the phase2 handlers to a +- * common code base. +- */ +- if (1) { +- DEBUG("rlm-eap_tnc: EAP-TNC can only be run after the user has been authenticated."); ++ if (request->packet == NULL) { ++ DEBUG2("rlm_eap_tnc: ERROR request->packet is NULL."); + return 0; + } + + DEBUG("tnc_initiate: %ld", handler->timestamp); + +- if(connectToTncs(inst->tnc_path)==-1){ +- DEBUG("Could not connect to TNCS"); ++ //calculate connectionString ++ ret = calculateConnectionString(request->packet, buf, buflen); ++ if(ret == 0){ ++ radlog(L_ERR, "rlm_eap_tnc:tnc_attach: calculating connection String failed."); ++ return 0; + } + ++ DEBUG2("TNC-INITIATE getting connection from NAA-EAP"); ++ + /* +- * Allocate an EAP-MD5 packet. ++ * get connection ++ * (uses a function from the NAA-EAP-library) ++ * the presence of the library is checked via the configure-script + */ +- reply = eaptnc_alloc(); +- if (reply == NULL) { +- radlog(L_ERR, "rlm_eap_tnc: out of memory"); ++ result = getConnection(buf, &conID); ++ ++ // check for errors ++ if (result != TNC_RESULT_SUCCESS) { ++ radlog(L_ERR, ++ "rlm_eap_tnc: tnc_initiate error while calling NAA-EAP getConnection"); + return 0; + } + + /* +- * Fill it with data. ++ * tries to get the username from FreeRADIUS; ++ * copied from modules/rlm_eap/types/rlm_eap_ttls/ttls.c + */ +- reply->code = PW_TNC_REQUEST; +- flags_ver = SET_START(flags_ver); //set start-flag +- DEBUG("$$$$$$$$$$$$$$$$Flags: %d", flags_ver); +- reply->flags_ver = flags_ver; +- reply->length = 1+1; /* one byte of flags_ver */ ++ VALUE_PAIR *usernameValuePair; ++ usernameValuePair = pairfind(request->packet->vps, PW_USER_NAME); + ++ VALUE_PAIR *eapMessageValuePair; ++ if (!usernameValuePair) { ++ eapMessageValuePair = pairfind(request->packet->vps, PW_EAP_MESSAGE); ++ ++ if (eapMessageValuePair && ++ (eapMessageValuePair->length >= EAP_HEADER_LEN + 2) && ++ (eapMessageValuePair->vp_strvalue[0] == PW_EAP_RESPONSE) && ++ (eapMessageValuePair->vp_strvalue[EAP_HEADER_LEN] == PW_EAP_IDENTITY) && ++ (eapMessageValuePair->vp_strvalue[EAP_HEADER_LEN + 1] != 0)) { ++ ++ /* ++ * Create & remember a User-Name ++ */ ++ usernameValuePair = pairmake("User-Name", "", T_OP_EQ); ++ rad_assert(usernameValuePair != NULL); ++ ++ memcpy(usernameValuePair->vp_strvalue, eapMessageValuePair->vp_strvalue + 5, ++ eapMessageValuePair->length - 5); ++ usernameValuePair->length = eapMessageValuePair->length - 5; ++ usernameValuePair->vp_strvalue[usernameValuePair->length] = 0; ++ } ++ } ++ ++ username = malloc(usernameValuePair->length + 1); ++ memcpy(username, usernameValuePair->vp_strvalue, usernameValuePair->length); ++ username[usernameValuePair->length] = '\0'; ++ ++ RDEBUG("Username for current TNC connection: %s", username); ++ ++ /* ++ * stores the username of this connection ++ * (uses a function from the NAA-EAP-library) ++ * the presence of the library is checked via the configure-script ++ */ ++ result = storeUsername(conID, username, usernameValuePair->length); ++ ++ // check for errors ++ if (result != TNC_RESULT_SUCCESS) { ++ radlog(L_ERR, ++ "rlm_eap_tnc: tnc_initiate error while calling NAA-EAP storeUsername"); ++ return 0; ++ } ++ ++ // set connection ID in FreeRADIUS ++ handler->opaque = malloc(sizeof(TNC_ConnectionID)); ++ memcpy(handler->opaque, &conID, sizeof(TNC_ConnectionID)); ++ ++ // build first EAP TNC request ++ TNC_BufferReference eap_tnc_request = malloc(sizeof(unsigned char)); ++ if (eap_tnc_request == NULL) { ++ radlog(L_ERR, "rlm_eap_tnc:tnc_initiate: malloc failed."); ++ return 0; ++ } ++ *eap_tnc_request = SET_START(1); ++ TNC_UInt32 eap_tnc_length = 1; ++ type_data = type_data; /* suppress -Wunused */ + + /* + * Compose the EAP-TNC packet out of the data structure, + * and free it. + */ +- eaptnc_compose(handler->eap_ds, reply); +- eaptnc_free(&reply); ++ eaptnc_compose(handler, eap_tnc_request, eap_tnc_length, PW_EAP_REQUEST); + +- //put sessionAttribute to Handler and increase sessionCounter +- handler->opaque = calloc(sizeof(TNC_ConnectionID), 1); +- if (handler->opaque == NULL) { +- radlog(L_ERR, "rlm_eap_tnc: out of memory"); +- return 0; +- } +- handler->free_opaque = free; +- memcpy(handler->opaque, &sessionCounter, sizeof(int)); +- sessionCounter++; +- + /* + * We don't need to authorize the user at this point. + * +@@ -124,246 +290,114 @@ + * to us... + */ + handler->stage = AUTHENTICATE; +- +- return 1; +-} + +-static void setVlanAttribute(rlm_eap_tnc_t *inst, EAP_HANDLER *handler, +- VlanAccessMode mode){ +- VALUE_PAIR *vp; +- char *vlanNumber = NULL; +- switch(mode){ +- case VLAN_ISOLATE: +- vlanNumber = inst->vlan_isolate; +- vp = pairfind(handler->request->config_items, +- PW_TNC_VLAN_ISOLATE); +- if (vp) vlanNumber = vp->vp_strvalue; +- break; +- case VLAN_ACCESS: +- vlanNumber = inst->vlan_access; +- vp = pairfind(handler->request->config_items, +- PW_TNC_VLAN_ACCESS); +- if (vp) vlanNumber = vp->vp_strvalue; +- break; +- +- default: +- DEBUG2(" rlm_eap_tnc: Internal error. Not setting vlan number"); +- return; +- } +- pairadd(&handler->request->reply->vps, +- pairmake("Tunnel-Type", "VLAN", T_OP_SET)); +- +- pairadd(&handler->request->reply->vps, +- pairmake("Tunnel-Medium-Type", "IEEE-802", T_OP_SET)); +- +- pairadd(&handler->request->reply->vps, +- pairmake("Tunnel-Private-Group-ID", vlanNumber, T_OP_SET)); +- ++ return 1; + } + +-/* +- * Authenticate a previously sent challenge. ++/** ++ * This function is called when a EAP_TNC_RESPONSE was received. ++ * It basically forwards the EAP_TNC data to NAA-TNCS and forms ++ * and appropriate EAP_RESPONSE. Furthermore, it sets the VlanID ++ * based on the TNC_ConnectionState determined by NAA-TNCS. ++ * ++ * @param type_arg The configuration data ++ * @param handler The EAP_HANDLER ++ * @return True, if successfully, else false. + */ +-static int tnc_authenticate(void *type_arg, EAP_HANDLER *handler) +-{ +- TNC_PACKET *packet; +- TNC_PACKET *reply; +- TNC_ConnectionID connId = *((TNC_ConnectionID *) (handler->opaque)); +- TNC_ConnectionState state; +- rlm_eap_tnc_t *inst = type_arg; +- int isAcknowledgement = 0; +- TNC_UInt32 tnccsMsgLength = 0; +- int isLengthIncluded; +- int moreFragments; +- TNC_UInt32 overallLength; +- TNC_BufferReference outMessage; +- TNC_UInt32 outMessageLength = 2; +- int outIsLengthIncluded=0; +- int outMoreFragments=0; +- TNC_UInt32 outOverallLength=0; ++static int tnc_authenticate(void *type_arg, EAP_HANDLER *handler) { + +- DEBUG2("HANDLER_OPAQUE: %d", (int) *((TNC_ConnectionID *) (handler->opaque))); +- DEBUG2("TNC-AUTHENTICATE is starting now for %d..........", (int) connId); ++ rad_assert(handler->request != NULL); // check that request has been sent previously ++ rad_assert(handler->stage == AUTHENTICATE); // check if initiate has been called + +- /* +- * Get the User-Password for this user. +- */ +- rad_assert(handler->request != NULL); +- rad_assert(handler->stage == AUTHENTICATE); +- +- /* +- * Extract the EAP-TNC packet. +- */ +- if (!(packet = eaptnc_extract(handler->eap_ds))) ++ if (handler == NULL) { ++ radlog(L_ERR, ++ "rlm_eap_tnc: tnc_authenticate invalid parameters: handler == NULL"); + return 0; ++ } ++ if (handler->eap_ds == NULL) { ++ radlog(L_ERR, ++ "rlm_eap_tnc: tnc_authenticate invalid parameters: handler->eap_ds == NULL"); ++ return 0; ++ } ++ if (handler->eap_ds->response == NULL) { ++ radlog( ++ L_ERR, ++ "rlm_eap_tnc: tnc_authenticate invalid parameters: handler->eap_ds->resonse == NULL"); ++ return 0; ++ } ++ if (handler->eap_ds->response->type.type != PW_EAP_TNC ++ || handler->eap_ds->response->type.length < 1 ++ || handler->eap_ds->response->type.data == NULL) { ++ radlog( ++ L_ERR, ++ "rlm_eap_tnc: tnc_authenticate invalid parameters: handler->eap_ds->response->type.type == %X, ->type.length == %u, ->type.data == %p", ++ handler->eap_ds->response->type.type, ++ handler->eap_ds->response->type.length, ++ handler->eap_ds->response->type.data); ++ return 0; ++ } + +- /* +- * Create a reply, and initialize it. +- */ +- reply = eaptnc_alloc(); +- if (!reply) { +- eaptnc_free(&packet); +- return 0; +- } +- +- reply->id = handler->eap_ds->request->id; +- reply->length = 0; +- if(packet->data_length==0){ +- tnccsMsgLength = packet->length-TNC_PACKET_LENGTH_WITHOUT_DATA_LENGTH; +- }else{ +- tnccsMsgLength = packet->length-TNC_PACKET_LENGTH; +- } +- isLengthIncluded = TNC_LENGTH_INCLUDED(packet->flags_ver); +- moreFragments = TNC_MORE_FRAGMENTS(packet->flags_ver); +- overallLength = packet->data_length; +- if(isLengthIncluded == 0 +- && moreFragments == 0 +- && overallLength == 0 +- && tnccsMsgLength == 0 +- && TNC_START(packet->flags_ver)==0){ +- +- isAcknowledgement = 1; +- } +- +- DEBUG("Data received: (%d)", (int) tnccsMsgLength); +-/* int i; +- for(i=0;i<tnccsMsgLength;i++){ +- DEBUG2("%c", (packet->data)[i]); +- } +- DEBUG2("\n"); +- */ +- state = exchangeTNCCSMessages(inst->tnc_path, +- connId, +- isAcknowledgement, +- packet->data, +- tnccsMsgLength, +- isLengthIncluded, +- moreFragments, +- overallLength, +- &outMessage, +- &outMessageLength, +- &outIsLengthIncluded, +- &outMoreFragments, +- &outOverallLength); +- DEBUG("GOT State %08x from TNCS", (unsigned int) state); +- if(state == TNC_CONNECTION_EAP_ACKNOWLEDGEMENT){ //send back acknoledgement +- reply->code = PW_TNC_REQUEST; +- reply->data = NULL; +- reply->data_length = 0; +- reply->flags_ver = 1; +- reply->length =TNC_PACKET_LENGTH_WITHOUT_DATA_LENGTH; +- }else{ //send back normal message +- DEBUG("GOT Message from TNCS (length: %d)", (int) outMessageLength); +- +- /* for(i=0;i<outMessageLength;i++){ +- DEBUG2("%c", outMessage[i]); +- } +- DEBUG2("\n"); +- */ +- DEBUG("outIsLengthIncluded: %d, outMoreFragments: %d, outOverallLength: %d", +- outIsLengthIncluded, outMoreFragments, (int) outOverallLength); +- DEBUG("NEW STATE: %08x", (unsigned int) state); +- switch(state){ +- case TNC_CONNECTION_STATE_HANDSHAKE: +- reply->code = PW_TNC_REQUEST; +- DEBUG2("Set Reply->Code to EAP-REQUEST\n"); +- break; +- case TNC_CONNECTION_STATE_ACCESS_ALLOWED: +- reply->code = PW_TNC_SUCCESS; +- setVlanAttribute(inst, handler,VLAN_ACCESS); +- break; +- case TNC_CONNECTION_STATE_ACCESS_NONE: +- reply->code = PW_TNC_FAILURE; +- //setVlanAttribute(inst, handler, VLAN_ISOLATE); +- break; +- case TNC_CONNECTION_STATE_ACCESS_ISOLATED: +- reply->code = PW_TNC_SUCCESS; +- setVlanAttribute(inst, handler, VLAN_ISOLATE); +- break; +- default: +- reply->code= PW_TNC_FAILURE; +- +- } +- if(outMessage!=NULL && outMessageLength!=0){ +- reply->data = outMessage; +- } +- reply->flags_ver = 1; +- if(outIsLengthIncluded){ +- reply->flags_ver = SET_LENGTH_INCLUDED(reply->flags_ver); +- reply->data_length = outOverallLength; +- reply->length = TNC_PACKET_LENGTH + outMessageLength; +- DEBUG("SET LENGTH: %d", reply->length); +- DEBUG("SET DATALENGTH: %d", (int) outOverallLength); +- }else{ +- reply->data_length = 0; +- reply->length = TNC_PACKET_LENGTH_WITHOUT_DATA_LENGTH + outMessageLength; +- DEBUG("SET LENGTH: %d", reply->length); +- } +- if(outMoreFragments){ +- reply->flags_ver = SET_MORE_FRAGMENTS(reply->flags_ver); +- } +- } +- +- /* +- * Compose the EAP-MD5 packet out of the data structure, +- * and free it. +- */ +- eaptnc_compose(handler->eap_ds, reply); +- eaptnc_free(&reply); +- +- handler->stage = AUTHENTICATE; +- +- eaptnc_free(&packet); +- return 1; +-} +- +-/* +- * Detach the EAP-TNC module. +- */ +-static int tnc_detach(void *arg) +-{ +- free(arg); +- return 0; +-} +- +- +-static CONF_PARSER module_config[] = { +- { "vlan_access", PW_TYPE_STRING_PTR, +- offsetof(rlm_eap_tnc_t, vlan_access), NULL, NULL }, +- { "vlan_isolate", PW_TYPE_STRING_PTR, +- offsetof(rlm_eap_tnc_t, vlan_isolate), NULL, NULL }, +- { "tnc_path", PW_TYPE_STRING_PTR, +- offsetof(rlm_eap_tnc_t, tnc_path), NULL, +- "/usr/local/lib/libTNCS.so"}, ++ // get connection ID ++ TNC_ConnectionID conID = *((TNC_ConnectionID *) (handler->opaque)); + +- { NULL, -1, 0, NULL, NULL } /* end the list */ +-}; ++ DEBUG2("TNC-AUTHENTICATE is starting now for connection ID %lX !", conID); + +-/* +- * Attach the EAP-TNC module. +- */ +-static int tnc_attach(CONF_SECTION *cs, void **instance) +-{ +- rlm_eap_tnc_t *inst; ++ // pass EAP_TNC data to NAA-EAP and get answer data ++ TNC_BufferReference output = NULL; ++ TNC_UInt32 outputLength = 0; ++ TNC_ConnectionState connectionState = TNC_CONNECTION_STATE_CREATE; + +- inst = malloc(sizeof(*inst)); +- if (!inst) return -1; +- memset(inst, 0, sizeof(*inst)); ++ /* ++ * forwards the eap_tnc data to NAA-EAP and gets the response ++ * (uses a function from the NAA-EAP-library) ++ * the presence of the library is checked via the configure-script ++ */ ++ TNC_Result result = processEAPTNCData(conID, handler->eap_ds->response->type.data, ++ handler->eap_ds->response->type.length, &output, &outputLength, ++ &connectionState); ++ ++ // check for errors ++ if (result != TNC_RESULT_SUCCESS) { ++ radlog(L_ERR, ++ "rlm_eap_tnc: tnc_authenticate error while calling NAA-EAP processEAPTNCData"); ++ return 0; ++ } + +- if (cf_section_parse(cs, inst, module_config) < 0) { +- tnc_detach(inst); +- return -1; ++ // output contains now the answer from NAA-EAP ++ uint8_t eapCode = 0; ++ // determine eapCode for request ++ switch (connectionState) { ++ case TNC_CONNECTION_STATE_HANDSHAKE: ++ eapCode = PW_EAP_REQUEST; ++ break; ++ case TNC_CONNECTION_STATE_ACCESS_NONE: ++ eapCode = PW_EAP_FAILURE; ++ break; ++ case TNC_CONNECTION_STATE_ACCESS_ALLOWED: ++ eapCode = PW_EAP_SUCCESS; ++ pairadd(&handler->request->config_items, pairmake("TNC-Status", "Access", T_OP_SET)); ++ break; ++ case TNC_CONNECTION_STATE_ACCESS_ISOLATED: ++ eapCode = PW_EAP_SUCCESS; ++ pairadd(&handler->request->config_items, pairmake("TNC-Status", "Isolate", T_OP_SET)); ++ break; ++ default: ++ radlog(L_ERR, ++ "rlm_eap_tnc: tnc_authenticate invalid TNC_CONNECTION_STATE."); ++ return 0; + } + +- +- if (!inst->vlan_access || !inst->vlan_isolate) { +- radlog(L_ERR, "rlm_eap_tnc: Must set both vlan_access and vlan_isolate"); +- tnc_detach(inst); +- return -1; ++ // form EAP_REQUEST ++ if (!eaptnc_compose(handler, output, outputLength, eapCode)) { ++ radlog(L_ERR, ++ "rlm_eap_tnc: tnc_authenticate error while forming EAP_REQUEST."); ++ return 0; + } + +- *instance = inst; +- return 0; ++ // FIXME: Why is that needed? ++ handler->stage = AUTHENTICATE; ++ ++ return 1; + } + + /* +@@ -371,10 +405,10 @@ + * That is, everything else should be 'static'. + */ + EAP_TYPE rlm_eap_tnc = { +- "eap_tnc", +- tnc_attach, /* attach */ +- tnc_initiate, /* Start the initial request */ +- NULL, /* authorization */ +- tnc_authenticate, /* authentication */ +- tnc_detach /* detach */ ++ "eap_tnc", ++ tnc_attach, /* attach */ ++ tnc_initiate, /* Start the initial request */ ++ NULL, /* authorization */ ++ tnc_authenticate, /* authentication */ ++ tnc_detach /* detach */ + }; +diff -u -r -N freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/tncs_connect.c freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/tncs_connect.c +--- freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/tncs_connect.c 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/tncs_connect.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,146 +0,0 @@ +-/* +- * This software is Copyright (C) 2006,2007 FH Hannover +- * +- * Portions of this code unrelated to FreeRADIUS are available +- * separately under a commercial license. If you require an +- * implementation of EAP-TNC that is not under the GPLv2, please +- * contact tnc@inform.fh-hannover.de for details. +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License, or +- * (at your option) any later version. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program; if not, write to the Free Software +- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA +- * +- */ +-#include <freeradius-devel/ident.h> +-RCSID("$Id$") +- +-#include "tncs_connect.h" +-#include <ltdl.h> +-#include <stdlib.h> +-#include <stdio.h> +-#include <eap.h> +- +- /* +- * FIXME: This linking should really be done at compile time. +- */ +-static lt_dlhandle handle = NULL; +- +-static ExchangeTNCCSMessagePointer callTNCS = NULL; +- +-/* +- * returns the function-pointer to a function of a shared-object +- * +- * soHandle: handle to a shared-object +- * name: name of the requested function +- * +- * return: the procAddress if found, else NULL +- */ +-static void *getProcAddress(lt_dlhandle soHandle, const char *name){ +- void *proc = lt_dlsym(soHandle, name); +- DEBUG("Searching for function %s", name); +- if(proc == NULL){ +- DEBUG("rlm_eap_tnc: Failed to resolve symbol %s: %s", +- name, lt_dlerror()); +- } +- return proc; +-} +- +- +-/* +- * establishs the connection to the TNCCS without calling functionality. +- * That means that the TNCS-shared-object is loaded and the function-pointer +- * to "exchangeTNCCSMessages" is explored. +- * +- * return: -1 if connect failed, 0 if connect was successful +- */ +-int connectToTncs(char *pathToSO){ +- int state = -1; +- if(handle==NULL){ +- handle = lt_dlopen(pathToSO); +- DEBUG("OPENED HANDLE!"); +- } +- +- if(handle==NULL){ +- DEBUG("HANDLE IS NULL"); +- DEBUG("rlm_eap_tnc: Failed to link to library %s: %s", +- pathToSO, lt_dlerror()); +- }else{ +- DEBUG("SO %s found!", pathToSO); +- if(callTNCS==NULL){ +- callTNCS = (ExchangeTNCCSMessagePointer) getProcAddress(handle, "exchangeTNCCSMessages"); +- } +- if(callTNCS!=NULL){ +- DEBUG("TNCS is connected"); +- state = 0; +-// int ret = callTNCS2(2, "Bla", NULL); +- // DEBUG("GOT %d from exchangeTNCCSMessages", ret); +- }else{ +- DEBUG("Could not find exchangeTNCCSMessages"); +- } +- +- } +- return state; +-} +- +-/* +- * Accesspoint to the TNCS for sending and receiving TNCCS-Messages. +- * -pathToSO: Path to TNCCS-Shared Object +- * -connId: identifies the client which the passed message belongs to. +- * -isAcknoledgement: 1 if acknoledgement received (then all following in-parameters unimportant +- * -input: input-TNCCS-message received from the client with connId +- * -inputLength: length of input-TNCCS-message +- * -isFirst: 1 if first message in fragmentation else 0 +- * -moreFragments: are there more Fragments to come (yes: 1, no: 0)? +- * -overallLength: length of all fragments together (only set if fragmentation) +- * -output: answer-TNCCS-message from the TNCS to the client +- * -outputLength: length of answer-TNCCS-message +- * -answerIsFirst: returned answer is first in row +- * -moreFragmentsFollow: more fragments after this answer +- * -overallLengthOut: length of all fragments together (only set if fragmentation) as answer +- * +- * return: state of connection as result of the exchange +- */ +-TNC_ConnectionState exchangeTNCCSMessages(/*in*/ char *pathToSO, +- /*in*/ TNC_ConnectionID connId, +- /*in*/ int isAcknoledgement, +- /*in*/ TNC_BufferReference input, +- /*in*/ TNC_UInt32 inputLength, +- /*in*/ int isFirst, +- /*in*/ int moreFragments, +- /*in*/ TNC_UInt32 overallLength, +- /*out*/ TNC_BufferReference *output, +- /*out*/ TNC_UInt32 *outputLength, +- /*out*/ int *answerIsFirst, +- /*out*/ int *moreFragmentsFollow, +- /*out*/ TNC_UInt32 *overallLengthOut){ +- TNC_ConnectionState state = TNC_CONNECTION_STATE_ACCESS_NONE; +- int connectStatus = connectToTncs(pathToSO); +- if(connectStatus!=-1){ +- state = callTNCS(connId, +- isAcknoledgement, +- input, +- inputLength, +- isFirst, +- moreFragments, +- overallLength, +- output, +- outputLength, +- answerIsFirst, +- moreFragmentsFollow, +- overallLengthOut); +- DEBUG("GOT TNC_ConnectionState (juhuuu): %u", (unsigned int) state); +- }else{ +- DEBUG("CAN NOT CONNECT TO TNCS"); +- } +- return state; +-} +diff -u -r -N freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/tncs_connect.h freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/tncs_connect.h +--- freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/tncs_connect.h 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/tncs_connect.h 1970-01-01 01:00:00.000000000 +0100 +@@ -1,70 +0,0 @@ +-/* +- * This software is Copyright (C) 2006,2007 FH Hannover +- * +- * Portions of this code unrelated to FreeRADIUS are available +- * separately under a commercial license. If you require an +- * implementation of EAP-TNC that is not under the GPLv2, please +- * contact tnc@inform.fh-hannover.de for details. +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License, or +- * (at your option) any later version. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program; if not, write to the Free Software +- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA +- * +- */ +- +-#ifndef _TNCS_CONNECT_H_ +-#define _TNCS_CONNECT_H_ +- +-#include "tncs.h" +- +-/* +- * establishs the connection to the TNCCS without calling functionality. +- * That means that the TNCS-shared-object is loaded and the function-pointer +- * to "exchangeTNCCSMessages" is explored. +- * +- * return: -1 if connect failed, 0 if connect was successful +- */ +-int connectToTncs(char *pathToSO); +-/* +- * Accesspoint to the TNCS for sending and receiving TNCCS-Messages. +- * -pathToSO: Path to TNCCS-Shared Object +- * -connId: identifies the client which the passed message belongs to. +- * -isAcknoledgement: 1 if acknoledgement received (then all following in-parameters unimportant +- * -input: input-TNCCS-message received from the client with connId +- * -inputLength: length of input-TNCCS-message +- * -isFirst: 1 if first message in fragmentation else 0 +- * -moreFragments: are there more Fragments to come (yes: 1, no: 0)? +- * -overallLength: length of all fragments together (only set if fragmentation) +- * -output: answer-TNCCS-message from the TNCS to the client +- * -outputLength: length of answer-TNCCS-message +- * -answerIsFirst: returned answer is first in row +- * -moreFragmentsFollow: more fragments after this answer +- * -overallLengthOut: length of all fragments together (only set if fragmentation) as answer +- * +- * return: state of connection as result of the exchange +- */ +-TNC_ConnectionState exchangeTNCCSMessages(/*in*/ char *pathToSO, +- /*in*/ TNC_ConnectionID connId, +- /*in*/ int isAcknoledgement, +- /*in*/ TNC_BufferReference input, +- /*in*/ TNC_UInt32 inputLength, +- /*in*/ int isFirst, +- /*in*/ int moreFragments, +- /*in*/ TNC_UInt32 overallLength, +- /*out*/ TNC_BufferReference *output, +- /*out*/ TNC_UInt32 *outputLength, +- /*out*/ int *answerIsFirst, +- /*out*/ int *moreFragmentsFollow, +- /*out*/ TNC_UInt32 *overallLengthOut); +- +-#endif //_TNCS_CONNECT_H_ +diff -u -r -N freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/tncs.h freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/tncs.h +--- freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_tnc/tncs.h 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_tnc/tncs.h 1970-01-01 01:00:00.000000000 +0100 +@@ -1,86 +0,0 @@ +-/* +- * This software is Copyright (C) 2006,2007 FH Hannover +- * +- * Portions of this code unrelated to FreeRADIUS are available +- * separately under a commercial license. If you require an +- * implementation of EAP-TNC that is not under the GPLv2, please +- * contact tnc@inform.fh-hannover.de for details. +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License, or +- * (at your option) any later version. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program; if not, write to the Free Software +- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA +- * +- */ +- +-#ifndef _TNCS_H_ +-#define _TNCS_H_ +- +- +- +-#ifdef __cplusplus +-extern "C" { +-#endif +- +-/* +- * copied from tncimv.h: +- */ +-typedef unsigned long TNC_UInt32; +-typedef TNC_UInt32 TNC_ConnectionState; +-typedef unsigned char *TNC_BufferReference; +-typedef TNC_UInt32 TNC_ConnectionID; +- +-#define TNC_CONNECTION_STATE_CREATE 0 +-#define TNC_CONNECTION_STATE_HANDSHAKE 1 +-#define TNC_CONNECTION_STATE_ACCESS_ALLOWED 2 +-#define TNC_CONNECTION_STATE_ACCESS_ISOLATED 3 +-#define TNC_CONNECTION_STATE_ACCESS_NONE 4 +-#define TNC_CONNECTION_STATE_DELETE 5 +-#define TNC_CONNECTION_EAP_ACKNOWLEDGEMENT 6 +- +-/* +- * Accesspoint (as function-pointer) to the TNCS for sending and receiving +- * TNCCS-Messages. +- * +- * -connId: identifies the client which the passed message belongs to. +- * -isAcknoledgement: 1 if acknoledgement received (then all following in-parameters unimportant +- * -input: input-TNCCS-message received from the client with connId +- * -inputLength: length of input-TNCCS-message +- * -isFirst: 1 if first message in fragmentation else 0 +- * -moreFragments: are there more Fragments to come (yes: 1, no: 0)? +- * -overallLength: length of all fragments together (only set if fragmentation) +- * -output: answer-TNCCS-message from the TNCS to the client +- * -outputLength: length of answer-TNCCS-message +- * -answerIsFirst: returned answer is first in row +- * -moreFragmentsFollow: more fragments after this answer +- * -overallLengthOut: length of all fragments together (only set if fragmentation) as answer +- * +- * return: state of connection as result of the exchange +- */ +-typedef TNC_ConnectionState (*ExchangeTNCCSMessagePointer)(/*in*/ TNC_ConnectionID connId, +- /*in*/ int isAcknoledgement, +- /*in*/ TNC_BufferReference input, +- /*in*/ TNC_UInt32 inputLength, +- /*in*/ int isFirst, +- /*in*/ int moreFragments, +- /*in*/ TNC_UInt32 overallLength, +- /*out*/ TNC_BufferReference *output, +- /*out*/ TNC_UInt32 *outputLength, +- /*out*/ int *answerIsFirst, +- /*out*/ int *moreFragmentsFollow, +- /*out*/ TNC_UInt32 *overallLengthOut +-); +- +-#ifdef __cplusplus +-} +-#endif +-#endif //_TNCS_H_ +diff -u -r -N freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_ttls/eap_ttls.h freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_ttls/eap_ttls.h +--- freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_ttls/eap_ttls.h 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_ttls/eap_ttls.h 2012-12-04 19:39:54.749423138 +0100 +@@ -37,6 +37,10 @@ + int copy_request_to_tunnel; + int use_tunneled_reply; + const char *virtual_server; ++ const char *tnc_virtual_server; // virtual server for EAP-TNC as the second inner method ++ VALUE_PAIR *auth_reply; // cache storage of the last reply of the first inner method ++ int auth_code; // cache storage of the reply-code of the first inner method ++ int doing_tnc; // status if we're doing EAP-TNC + } ttls_tunnel_t; + + /* +diff -u -r -N freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_ttls/rlm_eap_ttls.c freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_ttls/rlm_eap_ttls.c +--- freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_ttls/rlm_eap_ttls.c 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_ttls/rlm_eap_ttls.c 2012-12-04 19:39:54.749423138 +0100 +@@ -62,6 +62,11 @@ + * Virtual server for inner tunnel session. + */ + char *virtual_server; ++ ++ /* ++ * Virtual server for the second inner tunnel method, which is EAP-TNC. ++ */ ++ char *tnc_virtual_server; + } rlm_eap_ttls_t; + + +@@ -78,6 +83,9 @@ + { "virtual_server", PW_TYPE_STRING_PTR, + offsetof(rlm_eap_ttls_t, virtual_server), NULL, NULL }, + ++ { "tnc_virtual_server", PW_TYPE_STRING_PTR, ++ offsetof(rlm_eap_ttls_t, tnc_virtual_server), NULL, NULL }, ++ + { "include_length", PW_TYPE_BOOLEAN, + offsetof(rlm_eap_ttls_t, include_length), NULL, "yes" }, + +@@ -171,6 +179,10 @@ + t->copy_request_to_tunnel = inst->copy_request_to_tunnel; + t->use_tunneled_reply = inst->use_tunneled_reply; + t->virtual_server = inst->virtual_server; ++ t->tnc_virtual_server = inst->tnc_virtual_server; // virtual server for EAP-TNC as the second inner method ++ t->auth_reply = NULL; // cache storage of the last reply of the first inner method ++ t->auth_code = -1; // cache storage of the reply-code of the first inner method ++ t->doing_tnc = 0; // status if we're doing EAP-TNC (on start we're doing NOT) + return t; + } + +diff -u -r -N freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_ttls/ttls.c freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_ttls/ttls.c +--- freeradius-server-2.2.0.orig/src/modules/rlm_eap/types/rlm_eap_ttls/ttls.c 2012-09-10 13:51:34.000000000 +0200 ++++ freeradius-server-2.2.0/src/modules/rlm_eap/types/rlm_eap_ttls/ttls.c 2012-12-04 19:39:54.749423138 +0100 +@@ -585,6 +585,94 @@ + } + + /* ++ * Start EAP-TNC as a second inner method. ++ * Creates a new fake-request out of the original incoming request (via EAP_HANDLER). ++ * If it's the first time, we create a EAP-START-packet and send ++ * EAP-START := code = PW_EAP_REQUEST ++ * ++ */ ++static REQUEST* start_tnc(EAP_HANDLER *handler, ttls_tunnel_t *t) { ++ REQUEST* request = handler->request; ++ RDEBUG2("EAP-TNC as second inner authentication method starts now"); ++ ++ /* ++ * Allocate a fake REQUEST struct, ++ * to make a new request, based on the original request. ++ */ ++ REQUEST* fake = request_alloc_fake(request); ++ ++ /* ++ * Set the virtual server to that of EAP-TNC. ++ */ ++ fake->server = t->tnc_virtual_server; ++ ++ /* ++ * Build a new EAP-Message. ++ */ ++ VALUE_PAIR *eap_msg; ++ eap_msg = paircreate(PW_EAP_MESSAGE, PW_TYPE_OCTETS); ++ ++ /* ++ * Set the EAP-Message to look like EAP-Start ++ */ ++ eap_msg->vp_octets[0] = PW_EAP_RESPONSE; ++ eap_msg->vp_octets[1] = 0x00; ++ ++ /* ++ * Only setting EAP-TNC here, ++ * because it is intended to do user-authentication in the first inner method, ++ * and then a hardware-authentication (like EAP-TNC) as the second method. ++ */ ++ eap_msg->vp_octets[4] = PW_EAP_TNC; ++ ++ eap_msg->length = 0; ++ ++ /* ++ * Add the EAP-Message to the request. ++ */ ++ pairadd(&(fake->packet->vps), eap_msg); ++ ++ /* ++ * Process the new request by the virtual server configured for ++ * EAP-TNC. ++ */ ++ rad_authenticate(fake); ++ ++ /* ++ * From now on we're doing EAP-TNC as the second inner authentication method. ++ */ ++ t->doing_tnc = TRUE; ++ ++ return fake; ++} ++ ++/* ++ * Stop EAP-TNC as a second inner method. ++ * Copy the value pairs from the cached Access-Accept of the first inner method ++ * to the Access-Accept/Reject package of EAP-TNC. ++ */ ++static REQUEST* stop_tnc(REQUEST *request, ttls_tunnel_t *t) { ++ RDEBUG2("EAP-TNC as second inner authentication method stops now"); ++ ++ /* ++ * Copy the value-pairs of the origina Access-Accept of the first ++ * inner authentication method to the Access-Accept/Reject of the ++ * second inner authentication method (EAP-TNC). ++ */ ++ if (request->reply->code == PW_AUTHENTICATION_ACK) { ++ pairadd(&(request->reply->vps), t->auth_reply); ++ } else if (request->reply->code == PW_AUTHENTICATION_REJECT) { ++ pairadd(&(request->reply->vps), t->auth_reply); ++ } ++ ++ pairdelete(&(request->reply->vps), PW_MESSAGE_AUTHENTICATOR); ++ pairdelete(&(request->reply->vps), PW_PROXY_STATE); ++ pairdelete(&(request->reply->vps), PW_USER_NAME); ++ ++ return request; ++} ++ ++/* + * Use a reply packet to determine what to do. + */ + static int process_reply(EAP_HANDLER *handler, tls_session_t *tls_session, +@@ -1135,6 +1223,16 @@ + + } /* else fake->server == request->server */ + ++ /* ++ * If we're doing EAP-TNC as a second method, ++ * then set the server to that one. ++ * Then, rad_authenticate will run EAP-TNC, ++ * so that afterwards we have to look for the state of ++ * EAP-TNC. ++ */ ++ if (t->doing_tnc) { ++ fake->server = t->tnc_virtual_server; ++ } + + if ((debug_flag > 0) && fr_log_fp) { + RDEBUG("Sending tunneled request"); +@@ -1248,6 +1346,53 @@ + + default: + /* ++ * If the result of the first method was an acknowledgment OR ++ * if were already running EAP-TNC, ++ * we're doing additional things before processing the reply. ++ * Also the configuration for EAP-TTLS has to contain a virtual server ++ * for EAP-TNC as the second method. ++ */ ++ if (t->tnc_virtual_server) { ++ /* ++ * If the reply code of the first inner method is PW_AUTHENTICATION_ACK ++ * which means that the method was successful, ++ * and we're not doing EAP-TNC as the second method, ++ * then we want to intercept the Access-Accept and start EAP-TNC as the second inner method. ++ */ ++ if (fake->reply->code == PW_AUTHENTICATION_ACK ++ && t->doing_tnc == FALSE) { ++ RDEBUG2("Reply-Code of the first inner method was: %d (PW_AUTHENTICATION_ACK)", fake->reply->code); ++ ++ /* ++ * Save reply-value pairs and reply-code of the first method. ++ */ ++ t->auth_reply = fake->reply->vps; ++ fake->reply->vps = NULL; ++ t->auth_code = fake->reply->code; ++ ++ /* ++ * Create the start package for EAP-TNC. ++ */ ++ fake = start_tnc(handler, t); ++ ++ /* ++ * If we're doing EAP-TNC as the second inner method, ++ * and the reply->code was PW_AUTHENTICATION_ACK or PW_AUTHENTICATION_REJECT, ++ * then we stop EAP-TNC and create an combined Access-Accept or Access-Reject. ++ */ ++ } else if (t->doing_tnc == TRUE ++ && (fake->reply->code == PW_AUTHENTICATION_ACK || fake->reply->code == PW_AUTHENTICATION_REJECT)) { ++ ++ /* ++ * Create the combined Access-Accept or -Reject. ++ */ ++ RDEBUG2("Reply-Code of EAP-TNC as the second inner method was: %d (%s)", fake->reply->code, ++ fake->reply->code == PW_AUTHENTICATION_ACK ? "PW_AUTHENTICATION_ACK" : "PW_AUTHENTICATION_REJECT"); ++ fake = stop_tnc(fake, t); ++ } ++ } ++ ++ /* + * Returns RLM_MODULE_FOO, and we want to return + * PW_FOO + */ diff --git a/testing/scripts/recipes/patches/iptables-xfrm-hooks b/testing/scripts/recipes/patches/iptables-xfrm-hooks new file mode 100644 index 000000000..baa4a65c1 --- /dev/null +++ b/testing/scripts/recipes/patches/iptables-xfrm-hooks @@ -0,0 +1,61 @@ +From 4553ba0130bb9f0aa266cc1e4c3288a52f34eed6 Mon Sep 17 00:00:00 2001 +From: Martin Willi <martin@revosec.ch> +Date: Wed, 7 Apr 2010 11:40:15 +0200 +Subject: [PATCH] Added XFRM hooks to iptables headers + +--- + include/linux/netfilter.h | 2 ++ + include/linux/netfilter_ipv4.h | 6 +++++- + include/linux/netfilter_ipv6.h | 6 +++++- + 3 files changed, 12 insertions(+), 2 deletions(-) + +diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h +index 2eb00b6..b692c67 100644 +--- a/include/linux/netfilter.h ++++ b/include/linux/netfilter.h +@@ -35,6 +35,8 @@ enum nf_inet_hooks { + NF_INET_FORWARD, + NF_INET_LOCAL_OUT, + NF_INET_POST_ROUTING, ++ NF_INET_XFRM_IN, ++ NF_INET_XFRM_OUT, + NF_INET_NUMHOOKS + }; + +diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h +index 4d7ba3e..28d3ca9 100644 +--- a/include/linux/netfilter_ipv4.h ++++ b/include/linux/netfilter_ipv4.h +@@ -47,7 +47,11 @@ + #define NF_IP_LOCAL_OUT 3 + /* Packets about to hit the wire. */ + #define NF_IP_POST_ROUTING 4 +-#define NF_IP_NUMHOOKS 5 ++/* Packets going into XFRM input transformation. */ ++#define NF_IP_XFRM_IN 5 ++/* Packets going into XFRM output transformation. */ ++#define NF_IP_XFRM_OUT 6 ++#define NF_IP_NUMHOOKS 7 + + enum nf_ip_hook_priorities { + NF_IP_PRI_FIRST = INT_MIN, +diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h +index 7430b39..18590a5 100644 +--- a/include/linux/netfilter_ipv6.h ++++ b/include/linux/netfilter_ipv6.h +@@ -51,7 +51,11 @@ + #define NF_IP6_LOCAL_OUT 3 + /* Packets about to hit the wire. */ + #define NF_IP6_POST_ROUTING 4 +-#define NF_IP6_NUMHOOKS 5 ++/* Packets going into XFRM input transformation. */ ++#define NF_IP6_XFRM_IN 5 ++/* Packets going into XFRM output transformation. */ ++#define NF_IP6_XFRM_OUT 6 ++#define NF_IP6_NUMHOOKS 7 + + + enum nf_ip6_hook_priorities { +-- +1.6.3.3 + |