diff options
Diffstat (limited to 'testing/tests/ike2/hosts/moon/etc')
| -rwxr-xr-x | testing/tests/ike2/hosts/moon/etc/ipsec.conf | 25 | ||||
| -rwxr-xr-x | testing/tests/ike2/hosts/moon/etc/nat_updown | 152 | ||||
| -rw-r--r-- | testing/tests/ike2/hosts/moon/etc/strongswan.conf | 6 |
3 files changed, 0 insertions, 183 deletions
diff --git a/testing/tests/ike2/hosts/moon/etc/ipsec.conf b/testing/tests/ike2/hosts/moon/etc/ipsec.conf deleted file mode 100755 index e43e0d785..000000000 --- a/testing/tests/ike2/hosts/moon/etc/ipsec.conf +++ /dev/null @@ -1,25 +0,0 @@ -# /etc/ipsec.conf - strongSwan IPsec configuration file - -config setup - crlcheckinterval=180 - strictcrlpolicy=no - plutostart=no - -conn %default - ikelifetime=60m - keylife=20m - rekeymargin=3m - keyingtries=1 - keyexchange=ikev2 - mobike=no - -conn net-net - left=PH_IP_MOON - leftcert=moonCert.pem - leftid=@moon.strongswan.org - leftsourceip=%config - leftupdown=/etc/nat_updown - right=PH_IP_SUN - rightid=@sun.strongswan.org - rightsubnet=10.2.0.0/16 - auto=add diff --git a/testing/tests/ike2/hosts/moon/etc/nat_updown b/testing/tests/ike2/hosts/moon/etc/nat_updown deleted file mode 100755 index aab1df687..000000000 --- a/testing/tests/ike2/hosts/moon/etc/nat_updown +++ /dev/null @@ -1,152 +0,0 @@ -#! /bin/sh -# NAT updown script -# -# Copyright (C) 2010 Andreas Steffen <andreas.steffen@strongswan.org> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation; either version 2 of the License, or (at your -# option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. - -# things that this script gets (from ipsec_pluto(8) man page) -# -# PLUTO_VERSION -# indicates what version of this interface is being -# used. This document describes version 1.1. This -# is upwardly compatible with version 1.0. -# -# PLUTO_VERB -# specifies the name of the operation to be performed -# (prepare-host, prepare-client, up-host, up-client, -# down-host, or down-client). If the address family -# for security gateway to security gateway communica- -# tions is IPv6, then a suffix of -v6 is added to the -# verb. -# -# PLUTO_CONNECTION -# is the name of the connection for which we are -# routing. -# -# PLUTO_NEXT_HOP -# is the next hop to which packets bound for the peer -# must be sent. -# -# PLUTO_INTERFACE -# is the name of the ipsec interface to be used. -# -# PLUTO_REQID -# is the requid of the ESP policy -# -# PLUTO_ME -# is the IP address of our host. -# -# PLUTO_MY_ID -# is the ID of our host. -# -# PLUTO_MY_CLIENT -# is the IP address / count of our client subnet. If -# the client is just the host, this will be the -# host's own IP address / max (where max is 32 for -# IPv4 and 128 for IPv6). -# -# PLUTO_MY_CLIENT_NET -# is the IP address of our client net. If the client -# is just the host, this will be the host's own IP -# address. -# -# PLUTO_MY_CLIENT_MASK -# is the mask for our client net. If the client is -# just the host, this will be 255.255.255.255. -# -# PLUTO_MY_SOURCEIP -# if non-empty, then the source address for the route will be -# set to this IP address. -# -# PLUTO_MY_PROTOCOL -# is the IP protocol that will be transported. -# -# PLUTO_MY_PORT -# is the UDP/TCP port to which the IPsec SA is -# restricted on our side. -# -# PLUTO_PEER -# is the IP address of our peer. -# -# PLUTO_PEER_ID -# is the ID of our peer. -# -# PLUTO_PEER_CA -# is the CA which issued the cert of our peer. -# -# PLUTO_PEER_CLIENT -# is the IP address / count of the peer's client sub- -# net. If the client is just the peer, this will be -# the peer's own IP address / max (where max is 32 -# for IPv4 and 128 for IPv6). -# -# PLUTO_PEER_CLIENT_NET -# is the IP address of the peer's client net. If the -# client is just the peer, this will be the peer's -# own IP address. -# -# PLUTO_PEER_CLIENT_MASK -# is the mask for the peer's client net. If the -# client is just the peer, this will be -# 255.255.255.255. -# -# PLUTO_PEER_PROTOCOL -# is the IP protocol that will be transported. -# -# PLUTO_PEER_PORT -# is the UDP/TCP port to which the IPsec SA is -# restricted on the peer side. -# - -# define a minimum PATH environment in case it is not set -PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin" -export PATH - -# resolve octal escape sequences -PLUTO_MY_ID=`printf "$PLUTO_MY_ID"` -PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"` - -case "$PLUTO_VERB:$1" in -up-host:) - # connection to me coming up - # If you are doing a custom version, firewall commands go here. - ;; -down-host:) - # connection to me going down - # If you are doing a custom version, firewall commands go here. - ;; -up-client:) - # connection to my client subnet coming up - # If you are doing a custom version, firewall commands go here. - iptables -A FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \ - -d $PLUTO_PEER_CLIENT -j ACCEPT - iptables -A FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \ - -s $PLUTO_PEER_CLIENT -j ACCEPT - iptables -t nat -A POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \ - -d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP - echo "inserted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2 - ;; -down-client:) - # connection to my client subnet going down - # If you are doing a custom version, firewall commands go here. - iptables -D FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \ - -d $PLUTO_PEER_CLIENT -j ACCEPT - iptables -D FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \ - -s $PLUTO_PEER_CLIENT -j ACCEPT - iptables -t nat -D POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \ - -d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP - echo "deleted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2 - ;; -*) echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2 - exit 1 - ;; -esac diff --git a/testing/tests/ike2/hosts/moon/etc/strongswan.conf b/testing/tests/ike2/hosts/moon/etc/strongswan.conf deleted file mode 100644 index 161934454..000000000 --- a/testing/tests/ike2/hosts/moon/etc/strongswan.conf +++ /dev/null @@ -1,6 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon { - load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink socket-raw updown - multiple_authentication = no -} |