summaryrefslogtreecommitdiff
path: root/testing/tests/ike2/hosts/moon
diff options
context:
space:
mode:
Diffstat (limited to 'testing/tests/ike2/hosts/moon')
-rwxr-xr-xtesting/tests/ike2/hosts/moon/etc/ipsec.conf25
-rwxr-xr-xtesting/tests/ike2/hosts/moon/etc/nat_updown152
-rw-r--r--testing/tests/ike2/hosts/moon/etc/strongswan.conf6
3 files changed, 0 insertions, 183 deletions
diff --git a/testing/tests/ike2/hosts/moon/etc/ipsec.conf b/testing/tests/ike2/hosts/moon/etc/ipsec.conf
deleted file mode 100755
index e43e0d785..000000000
--- a/testing/tests/ike2/hosts/moon/etc/ipsec.conf
+++ /dev/null
@@ -1,25 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
- crlcheckinterval=180
- strictcrlpolicy=no
- plutostart=no
-
-conn %default
- ikelifetime=60m
- keylife=20m
- rekeymargin=3m
- keyingtries=1
- keyexchange=ikev2
- mobike=no
-
-conn net-net
- left=PH_IP_MOON
- leftcert=moonCert.pem
- leftid=@moon.strongswan.org
- leftsourceip=%config
- leftupdown=/etc/nat_updown
- right=PH_IP_SUN
- rightid=@sun.strongswan.org
- rightsubnet=10.2.0.0/16
- auto=add
diff --git a/testing/tests/ike2/hosts/moon/etc/nat_updown b/testing/tests/ike2/hosts/moon/etc/nat_updown
deleted file mode 100755
index aab1df687..000000000
--- a/testing/tests/ike2/hosts/moon/etc/nat_updown
+++ /dev/null
@@ -1,152 +0,0 @@
-#! /bin/sh
-# NAT updown script
-#
-# Copyright (C) 2010 Andreas Steffen <andreas.steffen@strongswan.org>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation; either version 2 of the License, or (at your
-# option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# for more details.
-
-# things that this script gets (from ipsec_pluto(8) man page)
-#
-# PLUTO_VERSION
-# indicates what version of this interface is being
-# used. This document describes version 1.1. This
-# is upwardly compatible with version 1.0.
-#
-# PLUTO_VERB
-# specifies the name of the operation to be performed
-# (prepare-host, prepare-client, up-host, up-client,
-# down-host, or down-client). If the address family
-# for security gateway to security gateway communica-
-# tions is IPv6, then a suffix of -v6 is added to the
-# verb.
-#
-# PLUTO_CONNECTION
-# is the name of the connection for which we are
-# routing.
-#
-# PLUTO_NEXT_HOP
-# is the next hop to which packets bound for the peer
-# must be sent.
-#
-# PLUTO_INTERFACE
-# is the name of the ipsec interface to be used.
-#
-# PLUTO_REQID
-# is the requid of the ESP policy
-#
-# PLUTO_ME
-# is the IP address of our host.
-#
-# PLUTO_MY_ID
-# is the ID of our host.
-#
-# PLUTO_MY_CLIENT
-# is the IP address / count of our client subnet. If
-# the client is just the host, this will be the
-# host's own IP address / max (where max is 32 for
-# IPv4 and 128 for IPv6).
-#
-# PLUTO_MY_CLIENT_NET
-# is the IP address of our client net. If the client
-# is just the host, this will be the host's own IP
-# address.
-#
-# PLUTO_MY_CLIENT_MASK
-# is the mask for our client net. If the client is
-# just the host, this will be 255.255.255.255.
-#
-# PLUTO_MY_SOURCEIP
-# if non-empty, then the source address for the route will be
-# set to this IP address.
-#
-# PLUTO_MY_PROTOCOL
-# is the IP protocol that will be transported.
-#
-# PLUTO_MY_PORT
-# is the UDP/TCP port to which the IPsec SA is
-# restricted on our side.
-#
-# PLUTO_PEER
-# is the IP address of our peer.
-#
-# PLUTO_PEER_ID
-# is the ID of our peer.
-#
-# PLUTO_PEER_CA
-# is the CA which issued the cert of our peer.
-#
-# PLUTO_PEER_CLIENT
-# is the IP address / count of the peer's client sub-
-# net. If the client is just the peer, this will be
-# the peer's own IP address / max (where max is 32
-# for IPv4 and 128 for IPv6).
-#
-# PLUTO_PEER_CLIENT_NET
-# is the IP address of the peer's client net. If the
-# client is just the peer, this will be the peer's
-# own IP address.
-#
-# PLUTO_PEER_CLIENT_MASK
-# is the mask for the peer's client net. If the
-# client is just the peer, this will be
-# 255.255.255.255.
-#
-# PLUTO_PEER_PROTOCOL
-# is the IP protocol that will be transported.
-#
-# PLUTO_PEER_PORT
-# is the UDP/TCP port to which the IPsec SA is
-# restricted on the peer side.
-#
-
-# define a minimum PATH environment in case it is not set
-PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin"
-export PATH
-
-# resolve octal escape sequences
-PLUTO_MY_ID=`printf "$PLUTO_MY_ID"`
-PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"`
-
-case "$PLUTO_VERB:$1" in
-up-host:)
- # connection to me coming up
- # If you are doing a custom version, firewall commands go here.
- ;;
-down-host:)
- # connection to me going down
- # If you are doing a custom version, firewall commands go here.
- ;;
-up-client:)
- # connection to my client subnet coming up
- # If you are doing a custom version, firewall commands go here.
- iptables -A FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \
- -d $PLUTO_PEER_CLIENT -j ACCEPT
- iptables -A FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \
- -s $PLUTO_PEER_CLIENT -j ACCEPT
- iptables -t nat -A POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \
- -d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP
- echo "inserted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2
- ;;
-down-client:)
- # connection to my client subnet going down
- # If you are doing a custom version, firewall commands go here.
- iptables -D FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \
- -d $PLUTO_PEER_CLIENT -j ACCEPT
- iptables -D FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \
- -s $PLUTO_PEER_CLIENT -j ACCEPT
- iptables -t nat -D POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \
- -d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP
- echo "deleted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2
- ;;
-*) echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
- exit 1
- ;;
-esac
diff --git a/testing/tests/ike2/hosts/moon/etc/strongswan.conf b/testing/tests/ike2/hosts/moon/etc/strongswan.conf
deleted file mode 100644
index 161934454..000000000
--- a/testing/tests/ike2/hosts/moon/etc/strongswan.conf
+++ /dev/null
@@ -1,6 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
- load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink socket-raw updown
- multiple_authentication = no
-}