summaryrefslogtreecommitdiff
path: root/testing/tests/ike2
diff options
context:
space:
mode:
Diffstat (limited to 'testing/tests/ike2')
-rw-r--r--testing/tests/ike2/description.txt6
-rw-r--r--testing/tests/ike2/evaltest.dat8
-rw-r--r--testing/tests/ike2/hosts/bob/etc/hosts70
-rwxr-xr-xtesting/tests/ike2/hosts/moon/etc/ipsec.conf25
-rwxr-xr-xtesting/tests/ike2/hosts/moon/etc/nat_updown152
-rw-r--r--testing/tests/ike2/hosts/moon/etc/strongswan.conf6
-rwxr-xr-xtesting/tests/ike2/hosts/sun/etc/ipsec.conf25
-rw-r--r--testing/tests/ike2/hosts/sun/etc/strongswan.conf6
-rw-r--r--testing/tests/ike2/posttest.dat5
-rw-r--r--testing/tests/ike2/pretest.dat9
-rw-r--r--testing/tests/ike2/test.conf21
11 files changed, 333 insertions, 0 deletions
diff --git a/testing/tests/ike2/description.txt b/testing/tests/ike2/description.txt
new file mode 100644
index 000000000..31d24cda6
--- /dev/null
+++ b/testing/tests/ike2/description.txt
@@ -0,0 +1,6 @@
+The router <b>moon</b> sets up a connection to gateway <b>sun</b> in order
+to reach the subnet hidden behind <b>sun</b>. The gateway <b>sun</b> assigns a
+virtual IP address to router <b>moon</b>. A special updown script on <b>moon</b>
+specified by <b>leftupdown=/etc/nat_updown</b> dynamically inserts a source NAT rule
+which maps the IP address of client <b>alice</b> to the virtual IP of <b>moon</b>.
+This allows <b>alice</b> to access client <b>bob</b> via the established IPsec tunnel.
diff --git a/testing/tests/ike2/evaltest.dat b/testing/tests/ike2/evaltest.dat
new file mode 100644
index 000000000..75d5ffbd3
--- /dev/null
+++ b/testing/tests/ike2/evaltest.dat
@@ -0,0 +1,8 @@
+moon::ipsec statusall::net-net.*ESTABLISHED::YES
+sun::ipsec statusall::net-net.*ESTABLISHED::YES
+moon::cat /var/log/daemon.log::inserted NAT rule mapping PH_IP_ALICE to virtual IP::YES
+alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_seq=1::YES
+sun::tcpdump::IP moon.strongswan.org > sun.strongswan.org: ESP::YES
+sun::tcpdump::IP sun.strongswan.org > moon.strongswan.org: ESP::YES
+bob::tcpdump::IP alice2.strongswan.org > bob.strongswan.org: ICMP::YES
+bob::tcpdump::IP bob.strongswan.org > alice2.strongswan.org: ICMP::YES
diff --git a/testing/tests/ike2/hosts/bob/etc/hosts b/testing/tests/ike2/hosts/bob/etc/hosts
new file mode 100644
index 000000000..ee854da09
--- /dev/null
+++ b/testing/tests/ike2/hosts/bob/etc/hosts
@@ -0,0 +1,70 @@
+# /etc/hosts: This file describes a number of hostname-to-address
+# mappings for the TCP/IP subsystem. It is mostly
+# used at boot time, when no name servers are running.
+# On small systems, this file can be used instead of a
+# "named" name server. Just add the names, addresses
+# and any aliases to this file...
+#
+
+127.0.0.1 localhost
+
+192.168.0.254 uml0.strongswan.org uml0
+10.1.0.254 uml1.strongswan.org uml1
+10.2.0.254 uml1.strongswan.org uml2
+
+10.1.0.10 alice.strongswan.org alice
+10.1.0.20 venus.strongswan.org venus
+10.1.0.1 moon1.strongswan.org moon1
+192.168.0.1 moon.strongswan.org moon
+192.168.0.50 alice1.strongswan.org alice1
+192.168.0.100 carol.strongswan.org carol
+10.3.0.1 carol1.strongswan.org carol1
+192.168.0.150 winnetou.strongswan.org winnetou crl.strongswan.org ocsp.strongswan.org ldap.strongswan.org
+192.168.0.200 dave.strongswan.org dave
+10.3.0.2 dave1.strongswan.org dave1
+192.168.0.2 sun.strongswan.org sun
+10.2.0.1 sun1.strongswan.org sun1
+10.2.0.10 bob.strongswan.org bob
+10.4.0.1 alice2.strongswan.org alice2
+
+# IPv6 versions of localhost and co
+::1 ip6-localhost ip6-loopback
+fe00::0 ip6-localnet
+ff00::0 ip6-mcastprefix
+ff02::1 ip6-allnodes
+ff02::2 ip6-allrouters
+ff02::3 ip6-allhosts
+
+# IPv6 solicited-node multicast addresses
+ff02::1:ff00:1 ip6-mcast-1
+ff02::1:ff00:2 ip6-mcast-2
+ff02::1:ff00:10 ip6-mcast-10
+ff02::1:ff00:15 ip6-mcast-15
+ff02::1:ff00:20 ip6-mcast-20
+
+# IPv6 site-local addresses
+fec0::5 ip6-alice1.strongswan.org ip6-alice1
+fec1::10 ip6-alice.strongswan.org ip6-alice
+fec1::20 ip6-venus.strongswan.org ip6-venus
+fec1::1 ip6-moon1.strongswan.org ip6-moon1
+fec0::1 ip6-moon.strongswan.org ip6-moon
+fec0::10 ip6-carol.strongswan.org ip6-carol
+fec3::1 ip6-carol1.strongswan.org ip6-carol1
+fec0::15 ip6-winnetou.strongswan.org ip6-winnetou
+fec0::20 ip6-dave.strongswan.org ip6-dave
+fec3::2 ip6-dave1.strongswan.org ip6-dave1
+fec0::2 ip6-sun.strongswan.org ip6-sun
+fec2::1 ip6-sun1.strongswan.org ip6-sun1
+fec2::10 ip6-bob.strongswan.org ip6-bob
+
+# IPv6 link-local HW derived addresses
+fe80::fcfd:0aff:fe01:14 ip6-hw-venus.strongswan.org ip6-hw-venus
+fe80::fcfd:0aff:fe01:0a ip6-hw-alice.strongswan.org ip6-hw-alice
+fe80::fcfd:0aff:fe01:01 ip6-hw-moon1.strongswan.org ip6-hw-moon1
+fe80::fcfd:c0ff:fea8:01 ip6-hw-moon.strongswan.org ip6-hw-moon
+fe80::fcfd:c0ff:fea8:64 ip6-hw-carol.strongswan.org ip6-hw-carol
+fe80::fcfd:c0ff:fea8:96 ip6-hw-winnetou.strongswan.org ip6-hw-winnetou
+fe80::fcfd:c0ff:fea8:c8 ip6-hw-dave.strongswan.org ip6-hw-dave
+fe80::fcfd:c0ff:fea8:02 ip6-hw-sun.strongswan.org ip6-hw-sun
+fe80::fcfd:0aff:fe02:01 ip6-hw-sun1.strongswan.org ip6-hw-sun1
+fe80::fcfd:0aff:fe02:0a ip6-hw-bob.strongswan.org ip6-hw-bob
diff --git a/testing/tests/ike2/hosts/moon/etc/ipsec.conf b/testing/tests/ike2/hosts/moon/etc/ipsec.conf
new file mode 100755
index 000000000..e43e0d785
--- /dev/null
+++ b/testing/tests/ike2/hosts/moon/etc/ipsec.conf
@@ -0,0 +1,25 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+ crlcheckinterval=180
+ strictcrlpolicy=no
+ plutostart=no
+
+conn %default
+ ikelifetime=60m
+ keylife=20m
+ rekeymargin=3m
+ keyingtries=1
+ keyexchange=ikev2
+ mobike=no
+
+conn net-net
+ left=PH_IP_MOON
+ leftcert=moonCert.pem
+ leftid=@moon.strongswan.org
+ leftsourceip=%config
+ leftupdown=/etc/nat_updown
+ right=PH_IP_SUN
+ rightid=@sun.strongswan.org
+ rightsubnet=10.2.0.0/16
+ auto=add
diff --git a/testing/tests/ike2/hosts/moon/etc/nat_updown b/testing/tests/ike2/hosts/moon/etc/nat_updown
new file mode 100755
index 000000000..aab1df687
--- /dev/null
+++ b/testing/tests/ike2/hosts/moon/etc/nat_updown
@@ -0,0 +1,152 @@
+#! /bin/sh
+# NAT updown script
+#
+# Copyright (C) 2010 Andreas Steffen <andreas.steffen@strongswan.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+
+# things that this script gets (from ipsec_pluto(8) man page)
+#
+# PLUTO_VERSION
+# indicates what version of this interface is being
+# used. This document describes version 1.1. This
+# is upwardly compatible with version 1.0.
+#
+# PLUTO_VERB
+# specifies the name of the operation to be performed
+# (prepare-host, prepare-client, up-host, up-client,
+# down-host, or down-client). If the address family
+# for security gateway to security gateway communica-
+# tions is IPv6, then a suffix of -v6 is added to the
+# verb.
+#
+# PLUTO_CONNECTION
+# is the name of the connection for which we are
+# routing.
+#
+# PLUTO_NEXT_HOP
+# is the next hop to which packets bound for the peer
+# must be sent.
+#
+# PLUTO_INTERFACE
+# is the name of the ipsec interface to be used.
+#
+# PLUTO_REQID
+# is the requid of the ESP policy
+#
+# PLUTO_ME
+# is the IP address of our host.
+#
+# PLUTO_MY_ID
+# is the ID of our host.
+#
+# PLUTO_MY_CLIENT
+# is the IP address / count of our client subnet. If
+# the client is just the host, this will be the
+# host's own IP address / max (where max is 32 for
+# IPv4 and 128 for IPv6).
+#
+# PLUTO_MY_CLIENT_NET
+# is the IP address of our client net. If the client
+# is just the host, this will be the host's own IP
+# address.
+#
+# PLUTO_MY_CLIENT_MASK
+# is the mask for our client net. If the client is
+# just the host, this will be 255.255.255.255.
+#
+# PLUTO_MY_SOURCEIP
+# if non-empty, then the source address for the route will be
+# set to this IP address.
+#
+# PLUTO_MY_PROTOCOL
+# is the IP protocol that will be transported.
+#
+# PLUTO_MY_PORT
+# is the UDP/TCP port to which the IPsec SA is
+# restricted on our side.
+#
+# PLUTO_PEER
+# is the IP address of our peer.
+#
+# PLUTO_PEER_ID
+# is the ID of our peer.
+#
+# PLUTO_PEER_CA
+# is the CA which issued the cert of our peer.
+#
+# PLUTO_PEER_CLIENT
+# is the IP address / count of the peer's client sub-
+# net. If the client is just the peer, this will be
+# the peer's own IP address / max (where max is 32
+# for IPv4 and 128 for IPv6).
+#
+# PLUTO_PEER_CLIENT_NET
+# is the IP address of the peer's client net. If the
+# client is just the peer, this will be the peer's
+# own IP address.
+#
+# PLUTO_PEER_CLIENT_MASK
+# is the mask for the peer's client net. If the
+# client is just the peer, this will be
+# 255.255.255.255.
+#
+# PLUTO_PEER_PROTOCOL
+# is the IP protocol that will be transported.
+#
+# PLUTO_PEER_PORT
+# is the UDP/TCP port to which the IPsec SA is
+# restricted on the peer side.
+#
+
+# define a minimum PATH environment in case it is not set
+PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin"
+export PATH
+
+# resolve octal escape sequences
+PLUTO_MY_ID=`printf "$PLUTO_MY_ID"`
+PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"`
+
+case "$PLUTO_VERB:$1" in
+up-host:)
+ # connection to me coming up
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+down-host:)
+ # connection to me going down
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+up-client:)
+ # connection to my client subnet coming up
+ # If you are doing a custom version, firewall commands go here.
+ iptables -A FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \
+ -d $PLUTO_PEER_CLIENT -j ACCEPT
+ iptables -A FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \
+ -s $PLUTO_PEER_CLIENT -j ACCEPT
+ iptables -t nat -A POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \
+ -d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP
+ echo "inserted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2
+ ;;
+down-client:)
+ # connection to my client subnet going down
+ # If you are doing a custom version, firewall commands go here.
+ iptables -D FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \
+ -d $PLUTO_PEER_CLIENT -j ACCEPT
+ iptables -D FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \
+ -s $PLUTO_PEER_CLIENT -j ACCEPT
+ iptables -t nat -D POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \
+ -d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP
+ echo "deleted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2
+ ;;
+*) echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
+ exit 1
+ ;;
+esac
diff --git a/testing/tests/ike2/hosts/moon/etc/strongswan.conf b/testing/tests/ike2/hosts/moon/etc/strongswan.conf
new file mode 100644
index 000000000..161934454
--- /dev/null
+++ b/testing/tests/ike2/hosts/moon/etc/strongswan.conf
@@ -0,0 +1,6 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+ load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink socket-raw updown
+ multiple_authentication = no
+}
diff --git a/testing/tests/ike2/hosts/sun/etc/ipsec.conf b/testing/tests/ike2/hosts/sun/etc/ipsec.conf
new file mode 100755
index 000000000..9cede8d56
--- /dev/null
+++ b/testing/tests/ike2/hosts/sun/etc/ipsec.conf
@@ -0,0 +1,25 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+ crlcheckinterval=180
+ strictcrlpolicy=no
+ plutostart=no
+
+conn %default
+ ikelifetime=60m
+ keylife=20m
+ rekeymargin=3m
+ keyingtries=1
+ keyexchange=ikev2
+ mobike=no
+
+conn net-net
+ left=PH_IP_SUN
+ leftcert=sunCert.pem
+ leftid=@sun.strongswan.org
+ leftsubnet=10.2.0.0/16
+ leftfirewall=yes
+ right=PH_IP_MOON
+ rightid=@moon.strongswan.org
+ rightsourceip=10.4.0.0/24
+ auto=add
diff --git a/testing/tests/ike2/hosts/sun/etc/strongswan.conf b/testing/tests/ike2/hosts/sun/etc/strongswan.conf
new file mode 100644
index 000000000..161934454
--- /dev/null
+++ b/testing/tests/ike2/hosts/sun/etc/strongswan.conf
@@ -0,0 +1,6 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+ load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink socket-raw updown
+ multiple_authentication = no
+}
diff --git a/testing/tests/ike2/posttest.dat b/testing/tests/ike2/posttest.dat
new file mode 100644
index 000000000..b121de27d
--- /dev/null
+++ b/testing/tests/ike2/posttest.dat
@@ -0,0 +1,5 @@
+moon::ipsec stop
+sun::ipsec stop
+moon::/etc/init.d/iptables stop 2> /dev/null
+sun::/etc/init.d/iptables stop 2> /dev/null
+moon::conntrack -F
diff --git a/testing/tests/ike2/pretest.dat b/testing/tests/ike2/pretest.dat
new file mode 100644
index 000000000..abbca90d7
--- /dev/null
+++ b/testing/tests/ike2/pretest.dat
@@ -0,0 +1,9 @@
+moon::/etc/init.d/iptables start 2> /dev/null
+sun::/etc/init.d/iptables start 2> /dev/null
+moon::conntrack -F
+moon::echo 1 > /proc/sys/net/ipv4/ip_forward
+moon::ipsec start
+sun::ipsec start
+moon::sleep 1
+moon::ipsec up net-net
+moon::sleep 1
diff --git a/testing/tests/ike2/test.conf b/testing/tests/ike2/test.conf
new file mode 100644
index 000000000..1971a33ab
--- /dev/null
+++ b/testing/tests/ike2/test.conf
@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# UML instances used for this test
+
+# All UML instances that are required for this test
+#
+UMLHOSTS="alice moon winnetou sun bob"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-m-w-s-b.png"
+
+# UML instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="sun bob"
+
+# UML instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon sun"
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 07:36:20 +0000