diff options
Diffstat (limited to 'testing/tests/ikev1/ip-two-pools')
13 files changed, 350 insertions, 0 deletions
diff --git a/testing/tests/ikev1/ip-two-pools/description.txt b/testing/tests/ikev1/ip-two-pools/description.txt new file mode 100644 index 000000000..33a5187c5 --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/description.txt @@ -0,0 +1,9 @@ +The hosts <b>alice</b> and <b>carol</b> set up a tunnel connection each to gateway <b>moon</b>. +Both hosts request a <b>virtual IP</b> via the IKEv1 Mode Config payload by using the +<b>leftsourceip=%config</b> parameter. Gateway <b>moon</b> assigns virtual IP +addresses from a simple pool defined by <b>rightsourceip=10.3.0.0/28</b> to hosts connecting +to the <b>eth0</b> (PH_IP_MOON) interface and virtual IP addresses from a simple pool defined +by <b>rightsourceip=10.4.0.0/28</b> to hosts connecting to the <b>eth1</b> (PH_IP_MOON1) interface. +<p> +Thus <b>carol</b> is assigned <b>PH_IP_CAROL1</b> whereas <b>alice</b> gets <b>10.4.0.1</b> and +both ping the gateway <b>moon</b>. diff --git a/testing/tests/ikev1/ip-two-pools/evaltest.dat b/testing/tests/ikev1/ip-two-pools/evaltest.dat new file mode 100644 index 000000000..2f19a77ba --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/evaltest.dat @@ -0,0 +1,18 @@ +carol::ipsec status::home.*IPsec SA established::YES +alice::ipsec status::home.*IPsec SA established::YES +moon::ipsec status::ext.*carol@strongswan.org.*erouted::YES +moon::ipsec status::int.*alice@strongswan.org.*erouted::YES +moon::cat /var/log/auth.log::adding virtual IP address pool.*int.*10.4.0.0/28::YES +moon::cat /var/log/auth.log::adding virtual IP address pool.*ext.*10.3.0.0/28::YES +moon::ipsec leases ext::1/15, 1 online::YES +moon::ipsec leases int::1/15, 1 online::YES +moon::ipsec leases ext 10.3.0.1::carol@strongswan.org::YES +moon::ipsec leases int 10.4.0.1::alice@strongswan.org::YES +carol::cat /var/log/auth.log::setting virtual IP source address to 10.3.0.1::YES +alice::cat /var/log/auth.log::setting virtual IP source address to 10.4.0.1::YES +carol::ping -c 1 PH_IP_MOON::64 bytes from PH_IP_MOON: icmp_seq=1::YES +alice::ping -c 1 PH_IP_MOON1::64 bytes from PH_IP_MOON1: icmp_seq=1::YES +carol::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP::YES +carol::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP::YES +alice::tcpdump::IP alice.strongswan.org > moon1.strongswan.org: ESP::YES +alice::tcpdump::IP moon1.strongswan.org > alice.strongswan.org: ESP::YES diff --git a/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/init.d/iptables b/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/init.d/iptables new file mode 100755 index 000000000..97b773645 --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/init.d/iptables @@ -0,0 +1,78 @@ +#!/sbin/runscript +# Copyright 1999-2004 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +opts="start stop reload" + +depend() { + before net + need logger +} + +start() { + ebegin "Starting firewall" + + # default policy is DROP + /sbin/iptables -P INPUT DROP + /sbin/iptables -P OUTPUT DROP + /sbin/iptables -P FORWARD DROP + + # allow ESP + iptables -A INPUT -i eth0 -p 50 -j ACCEPT + iptables -A OUTPUT -o eth0 -p 50 -j ACCEPT + + # allow IKE + iptables -A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT + iptables -A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT + + # allow MOBIKE + iptables -A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT + iptables -A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT + + + # allow crl fetch from winnetou + iptables -A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT + iptables -A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT + + # allow ssh + iptables -A INPUT -p tcp --dport 22 -j ACCEPT + iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT + + eend $? +} + +stop() { + ebegin "Stopping firewall" + for a in `cat /proc/net/ip_tables_names`; do + /sbin/iptables -F -t $a + /sbin/iptables -X -t $a + + if [ $a == nat ]; then + /sbin/iptables -t nat -P PREROUTING ACCEPT + /sbin/iptables -t nat -P POSTROUTING ACCEPT + /sbin/iptables -t nat -P OUTPUT ACCEPT + elif [ $a == mangle ]; then + /sbin/iptables -t mangle -P PREROUTING ACCEPT + /sbin/iptables -t mangle -P INPUT ACCEPT + /sbin/iptables -t mangle -P FORWARD ACCEPT + /sbin/iptables -t mangle -P OUTPUT ACCEPT + /sbin/iptables -t mangle -P POSTROUTING ACCEPT + elif [ $a == filter ]; then + /sbin/iptables -t filter -P INPUT ACCEPT + /sbin/iptables -t filter -P FORWARD ACCEPT + /sbin/iptables -t filter -P OUTPUT ACCEPT + fi + done + eend $? +} + +reload() { + ebegin "Flushing firewall" + for a in `cat /proc/net/ip_tables_names`; do + /sbin/iptables -F -t $a + /sbin/iptables -X -t $a + done; + eend $? + start +} + diff --git a/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/ipsec.conf b/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/ipsec.conf new file mode 100755 index 000000000..e8077b22a --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/ipsec.conf @@ -0,0 +1,24 @@ +# /etc/ipsec.conf - strongSwan IPsec configuration file + +config setup + crlcheckinterval=180 + strictcrlpolicy=no + charonstart=no + plutodebug=control + +conn %default + ikelifetime=60m + keylife=20m + rekeymargin=3m + keyingtries=1 + keyexchange=ikev1 + +conn home + left=%defaultroute + leftsourceip=%config + leftcert=aliceCert.pem + leftid=alice@strongswan.org + leftfirewall=yes + right=PH_IP_MOON1 + rightid=@moon.strongswan.org + auto=add diff --git a/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/strongswan.conf b/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/strongswan.conf new file mode 100644 index 000000000..ba5dbdd1d --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/strongswan.conf @@ -0,0 +1,11 @@ +# /etc/strongswan.conf - strongSwan configuration file + +pluto { + load = sha1 sha2 md5 aes des hmac pem pkcs1 x509 gmp random curl +} + +# pluto uses optimized DH exponent sizes (RFC 3526) + +libstrongswan { + dh_exponent_ansi_x9_42 = no +} diff --git a/testing/tests/ikev1/ip-two-pools/hosts/carol/etc/ipsec.conf b/testing/tests/ikev1/ip-two-pools/hosts/carol/etc/ipsec.conf new file mode 100755 index 000000000..99a8c60ff --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/hosts/carol/etc/ipsec.conf @@ -0,0 +1,24 @@ +# /etc/ipsec.conf - strongSwan IPsec configuration file + +config setup + crlcheckinterval=180 + strictcrlpolicy=no + charonstart=no + plutodebug=control + +conn %default + ikelifetime=60m + keylife=20m + rekeymargin=3m + keyingtries=1 + keyexchange=ikev1 + +conn home + left=PH_IP_CAROL + leftsourceip=%config + leftcert=carolCert.pem + leftid=carol@strongswan.org + leftfirewall=yes + right=PH_IP_MOON + rightid=@moon.strongswan.org + auto=add diff --git a/testing/tests/ikev1/ip-two-pools/hosts/carol/etc/strongswan.conf b/testing/tests/ikev1/ip-two-pools/hosts/carol/etc/strongswan.conf new file mode 100644 index 000000000..ba5dbdd1d --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/hosts/carol/etc/strongswan.conf @@ -0,0 +1,11 @@ +# /etc/strongswan.conf - strongSwan configuration file + +pluto { + load = sha1 sha2 md5 aes des hmac pem pkcs1 x509 gmp random curl +} + +# pluto uses optimized DH exponent sizes (RFC 3526) + +libstrongswan { + dh_exponent_ansi_x9_42 = no +} diff --git a/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/init.d/iptables b/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/init.d/iptables new file mode 100755 index 000000000..bb9d03acd --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/init.d/iptables @@ -0,0 +1,91 @@ +#!/sbin/runscript +# Copyright 1999-2004 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +opts="start stop reload" + +depend() { + before net + need logger +} + +start() { + ebegin "Starting firewall" + + # enable IP forwarding + echo 1 > /proc/sys/net/ipv4/ip_forward + + # default policy is DROP + /sbin/iptables -P INPUT DROP + /sbin/iptables -P OUTPUT DROP + /sbin/iptables -P FORWARD DROP + + # allow esp + iptables -A INPUT -i eth0 -p 50 -j ACCEPT + iptables -A OUTPUT -o eth0 -p 50 -j ACCEPT + iptables -A INPUT -i eth1 -p 50 -j ACCEPT + iptables -A OUTPUT -o eth1 -p 50 -j ACCEPT + + # allow IKE + iptables -A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT + iptables -A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT + iptables -A INPUT -i eth1 -p udp --sport 500 --dport 500 -j ACCEPT + iptables -A OUTPUT -o eth1 -p udp --dport 500 --sport 500 -j ACCEPT + + # allow MobIKE + iptables -A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT + iptables -A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT + iptables -A INPUT -i eth1 -p udp --sport 4500 --dport 4500 -j ACCEPT + iptables -A OUTPUT -o eth1 -p udp --dport 4500 --sport 4500 -j ACCEPT + + # allow crl fetch from winnetou + iptables -A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT + iptables -A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT + iptables -A FORWARD -i eth0 -o eth1 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT + iptables -A FORWARD -o eth0 -i eth1 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT + + # masquerade crl fetches to winnetou + iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -d PH_IP_WINNETOU -j MASQUERADE + + # allow ssh + iptables -A INPUT -p tcp --dport 22 -j ACCEPT + iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT + + eend $? +} + +stop() { + ebegin "Stopping firewall" + for a in `cat /proc/net/ip_tables_names`; do + /sbin/iptables -F -t $a + /sbin/iptables -X -t $a + + if [ $a == nat ]; then + /sbin/iptables -t nat -P PREROUTING ACCEPT + /sbin/iptables -t nat -P POSTROUTING ACCEPT + /sbin/iptables -t nat -P OUTPUT ACCEPT + elif [ $a == mangle ]; then + /sbin/iptables -t mangle -P PREROUTING ACCEPT + /sbin/iptables -t mangle -P INPUT ACCEPT + /sbin/iptables -t mangle -P FORWARD ACCEPT + /sbin/iptables -t mangle -P OUTPUT ACCEPT + /sbin/iptables -t mangle -P POSTROUTING ACCEPT + elif [ $a == filter ]; then + /sbin/iptables -t filter -P INPUT ACCEPT + /sbin/iptables -t filter -P FORWARD ACCEPT + /sbin/iptables -t filter -P OUTPUT ACCEPT + fi + done + eend $? +} + +reload() { + ebegin "Flushing firewall" + for a in `cat /proc/net/ip_tables_names`; do + /sbin/iptables -F -t $a + /sbin/iptables -X -t $a + done; + eend $? + start +} + diff --git a/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/ipsec.conf b/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/ipsec.conf new file mode 100755 index 000000000..4771e26d6 --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/ipsec.conf @@ -0,0 +1,28 @@ +# /etc/ipsec.conf - strongSwan IPsec configuration file + +config setup + crlcheckinterval=180 + strictcrlpolicy=no + charonstart=no + plutodebug=control + +conn %default + ikelifetime=60m + keylife=20m + rekeymargin=3m + keyingtries=1 + keyexchange=ikev1 + leftcert=moonCert.pem + leftid=@moon.strongswan.org + leftfirewall=yes + right=%any + +conn int + left=PH_IP_MOON1 + rightsourceip=10.4.0.0/28 + auto=add + +conn ext + left=PH_IP_MOON + rightsourceip=10.3.0.0/28 + auto=add diff --git a/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/strongswan.conf b/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/strongswan.conf new file mode 100644 index 000000000..ba5dbdd1d --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/strongswan.conf @@ -0,0 +1,11 @@ +# /etc/strongswan.conf - strongSwan configuration file + +pluto { + load = sha1 sha2 md5 aes des hmac pem pkcs1 x509 gmp random curl +} + +# pluto uses optimized DH exponent sizes (RFC 3526) + +libstrongswan { + dh_exponent_ansi_x9_42 = no +} diff --git a/testing/tests/ikev1/ip-two-pools/posttest.dat b/testing/tests/ikev1/ip-two-pools/posttest.dat new file mode 100644 index 000000000..4474e5ade --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/posttest.dat @@ -0,0 +1,12 @@ +alice::ipsec stop +moon::ipsec stop +carol::ipsec stop +moon::/etc/init.d/iptables stop 2> /dev/null +carol::/etc/init.d/iptables stop 2> /dev/null +alice::/etc/init.d/iptables stop 2> /dev/null +carol::ip addr del 10.3.0.1/32 dev eth0 +alice::ip addr del 10.4.0.1/32 dev eth0 +moon::ip route del 10.3.0.0/16 via 192.168.0.1 +moon::ip route del 10.4.0.0/16 via 10.1.0.1 +moon::conntrack -F +moon::rm /etc/ipsec.d/ipsec.* diff --git a/testing/tests/ikev1/ip-two-pools/pretest.dat b/testing/tests/ikev1/ip-two-pools/pretest.dat new file mode 100644 index 000000000..8091a6ed2 --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/pretest.dat @@ -0,0 +1,12 @@ +moon::ip route add 10.3.0.0/16 via 192.168.0.1 +moon::ip route add 10.4.0.0/16 via 10.1.0.1 +moon::/etc/init.d/iptables start 2> /dev/null +carol::/etc/init.d/iptables start 2> /dev/null +alice::/etc/init.d/iptables start 2> /dev/null +carol::ipsec start +moon::ipsec start +alice::ipsec start +carol::sleep 2 +carol::ipsec up home +alice::ipsec up home +alice::sleep 1 diff --git a/testing/tests/ikev1/ip-two-pools/test.conf b/testing/tests/ikev1/ip-two-pools/test.conf new file mode 100644 index 000000000..329774c0a --- /dev/null +++ b/testing/tests/ikev1/ip-two-pools/test.conf @@ -0,0 +1,21 @@ +#!/bin/bash +# +# This configuration file provides information on the +# UML instances used for this test + +# All UML instances that are required for this test +# +UMLHOSTS="alice moon carol winnetou" + +# Corresponding block diagram +# +DIAGRAM="a-m-c-w.png" + +# UML instances on which tcpdump is to be started +# +TCPDUMPHOSTS="alice carol" + +# UML instances on which IPsec is started +# Used for IPsec logging purposes +# +IPSECHOSTS="alice moon carol" |