summaryrefslogtreecommitdiff
path: root/testing/tests/libipsec
diff options
context:
space:
mode:
Diffstat (limited to 'testing/tests/libipsec')
-rw-r--r--testing/tests/libipsec/host2host-cert/description.txt10
-rw-r--r--testing/tests/libipsec/host2host-cert/evaltest.dat7
-rw-r--r--testing/tests/libipsec/host2host-cert/hosts/moon/etc/ipsec.conf19
-rw-r--r--testing/tests/libipsec/host2host-cert/hosts/moon/etc/strongswan.conf17
-rwxr-xr-xtesting/tests/libipsec/host2host-cert/hosts/moon/etc/updown705
-rw-r--r--testing/tests/libipsec/host2host-cert/hosts/sun/etc/ipsec.conf19
-rw-r--r--testing/tests/libipsec/host2host-cert/hosts/sun/etc/strongswan.conf17
-rwxr-xr-xtesting/tests/libipsec/host2host-cert/hosts/sun/etc/updown705
-rw-r--r--testing/tests/libipsec/host2host-cert/posttest.dat6
-rw-r--r--testing/tests/libipsec/host2host-cert/pretest.dat8
-rw-r--r--testing/tests/libipsec/host2host-cert/test.conf21
-rw-r--r--testing/tests/libipsec/rw-suite-b/hosts/moon/etc/ipsec.conf1
12 files changed, 1535 insertions, 0 deletions
diff --git a/testing/tests/libipsec/host2host-cert/description.txt b/testing/tests/libipsec/host2host-cert/description.txt
new file mode 100644
index 000000000..b240515fb
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert/description.txt
@@ -0,0 +1,10 @@
+A connection between the hosts <b>moon</b> and <b>sun</b> is set up.
+The authentication is based on <b>X.509 certificates</b> and the <b>kernel-libipsec</b>
+plugin is used for userland IPsec ESP encryption. <b>Firewall marks</b> are used to make
+the direct ESP connection possible and still allow IKE traffic to flow freely between
+the two hosts.
+<p/>
+Upon the successful establishment of the IPsec tunnel, an updown script automatically
+inserts iptables-based firewall rules that let pass the traffic tunneled via the
+<b>ipsec0</b> tun interface. In order to test both host-to-host tunnel and firewall,
+<b>moon</b> pings <b>sun</b>.
diff --git a/testing/tests/libipsec/host2host-cert/evaltest.dat b/testing/tests/libipsec/host2host-cert/evaltest.dat
new file mode 100644
index 000000000..105c2a4ed
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert/evaltest.dat
@@ -0,0 +1,7 @@
+moon::ipsec status 2> /dev/null::host-host.*ESTABLISHED.*moon.strongswan.org.*sun.strongswan.org::YES
+sun:: ipsec status 2> /dev/null::host-host.*ESTABLISHED.*sun.strongswan.org.*moon.strongswan.org::YES
+moon::ipsec status 2> /dev/null::host-host.*INSTALLED, TUNNEL::YES
+sun:: ipsec status 2> /dev/null::host-host.*INSTALLED, TUNNEL::YES
+moon::ping -c 1 PH_IP_SUN::64 bytes from PH_IP_SUN: icmp_req=1::YES
+sun::tcpdump::IP moon.strongswan.org.4500 > sun.strongswan.org.4500: UDP-encap: ESP::YES
+sun::tcpdump::IP sun.strongswan.org.4500 > moon.strongswan.org.4500: UDP-encap: ESP::YES
diff --git a/testing/tests/libipsec/host2host-cert/hosts/moon/etc/ipsec.conf b/testing/tests/libipsec/host2host-cert/hosts/moon/etc/ipsec.conf
new file mode 100644
index 000000000..6e8329a44
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert/hosts/moon/etc/ipsec.conf
@@ -0,0 +1,19 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+
+conn %default
+ ikelifetime=60m
+ keylife=20m
+ rekeymargin=3m
+ keyingtries=1
+ keyexchange=ikev2
+
+conn host-host
+ left=PH_IP_MOON
+ leftcert=moonCert.pem
+ leftid=@moon.strongswan.org
+ leftupdown=/etc/updown
+ right=PH_IP_SUN
+ rightid=@sun.strongswan.org
+ auto=add
diff --git a/testing/tests/libipsec/host2host-cert/hosts/moon/etc/strongswan.conf b/testing/tests/libipsec/host2host-cert/hosts/moon/etc/strongswan.conf
new file mode 100644
index 000000000..d5c4d2718
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert/hosts/moon/etc/strongswan.conf
@@ -0,0 +1,17 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+ load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-libipsec kernel-netlink socket-default updown
+ multiple_authentication = no
+ plugins {
+ kernel-netlink {
+ fwmark = !0x42
+ }
+ socket-default {
+ fwmark = 0x42
+ }
+ kernel-libipsec {
+ allow_peer_ts = yes
+ }
+ }
+}
diff --git a/testing/tests/libipsec/host2host-cert/hosts/moon/etc/updown b/testing/tests/libipsec/host2host-cert/hosts/moon/etc/updown
new file mode 100755
index 000000000..aea6d8555
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert/hosts/moon/etc/updown
@@ -0,0 +1,705 @@
+#! /bin/sh
+# iproute2 version, default updown script
+#
+# Copyright (C) 2003-2004 Nigel Meteringham
+# Copyright (C) 2003-2004 Tuomo Soini
+# Copyright (C) 2002-2004 Michael Richardson
+# Copyright (C) 2005-2007 Andreas Steffen <andreas.steffen@strongswan.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+
+# CAUTION: Installing a new version of strongSwan will install a new
+# copy of this script, wiping out any custom changes you make. If
+# you need changes, make a copy of this under another name, and customize
+# that, and use the (left/right)updown parameters in ipsec.conf to make
+# strongSwan use yours instead of this default one.
+
+# things that this script gets (from ipsec_pluto(8) man page)
+#
+# PLUTO_VERSION
+# indicates what version of this interface is being
+# used. This document describes version 1.1. This
+# is upwardly compatible with version 1.0.
+#
+# PLUTO_VERB
+# specifies the name of the operation to be performed
+# (prepare-host, prepare-client, up-host, up-client,
+# down-host, or down-client). If the address family
+# for security gateway to security gateway communica-
+# tions is IPv6, then a suffix of -v6 is added to the
+# verb.
+#
+# PLUTO_CONNECTION
+# is the name of the connection for which we are
+# routing.
+#
+# PLUTO_NEXT_HOP
+# is the next hop to which packets bound for the peer
+# must be sent.
+#
+# PLUTO_INTERFACE
+# is the name of the ipsec interface to be used.
+#
+# PLUTO_REQID
+# is the requid of the ESP policy
+#
+# PLUTO_UNIQUEID
+# is the unique identifier of the associated IKE_SA
+#
+# PLUTO_ME
+# is the IP address of our host.
+#
+# PLUTO_MY_ID
+# is the ID of our host.
+#
+# PLUTO_MY_CLIENT
+# is the IP address / count of our client subnet. If
+# the client is just the host, this will be the
+# host's own IP address / max (where max is 32 for
+# IPv4 and 128 for IPv6).
+#
+# PLUTO_MY_CLIENT_NET
+# is the IP address of our client net. If the client
+# is just the host, this will be the host's own IP
+# address.
+#
+# PLUTO_MY_CLIENT_MASK
+# is the mask for our client net. If the client is
+# just the host, this will be 255.255.255.255.
+#
+# PLUTO_MY_SOURCEIP
+# PLUTO_MY_SOURCEIP4_$i
+# PLUTO_MY_SOURCEIP6_$i
+# contains IPv4/IPv6 virtual IP received from a responder,
+# $i enumerates from 1 to the number of IP per address family.
+# PLUTO_MY_SOURCEIP is a legacy variable and equals to the first
+# virtual IP, IPv4 or IPv6.
+#
+# PLUTO_MY_PROTOCOL
+# is the IP protocol that will be transported.
+#
+# PLUTO_MY_PORT
+# is the UDP/TCP port to which the IPsec SA is
+# restricted on our side.
+#
+# PLUTO_PEER
+# is the IP address of our peer.
+#
+# PLUTO_PEER_ID
+# is the ID of our peer.
+#
+# PLUTO_PEER_CA
+# is the CA which issued the cert of our peer.
+#
+# PLUTO_PEER_CLIENT
+# is the IP address / count of the peer's client sub-
+# net. If the client is just the peer, this will be
+# the peer's own IP address / max (where max is 32
+# for IPv4 and 128 for IPv6).
+#
+# PLUTO_PEER_CLIENT_NET
+# is the IP address of the peer's client net. If the
+# client is just the peer, this will be the peer's
+# own IP address.
+#
+# PLUTO_PEER_CLIENT_MASK
+# is the mask for the peer's client net. If the
+# client is just the peer, this will be
+# 255.255.255.255.
+#
+# PLUTO_PEER_PROTOCOL
+# is the IP protocol that will be transported.
+#
+# PLUTO_PEER_PORT
+# is the UDP/TCP port to which the IPsec SA is
+# restricted on the peer side.
+#
+# PLUTO_XAUTH_ID
+# is an optional user ID employed by the XAUTH protocol
+#
+# PLUTO_MARK_IN
+# is an optional XFRM mark set on the inbound IPsec SA
+#
+# PLUTO_MARK_OUT
+# is an optional XFRM mark set on the outbound IPsec SA
+#
+# PLUTO_UDP_ENC
+# contains the remote UDP port in the case of ESP_IN_UDP
+# encapsulation
+#
+# PLUTO_DNS4_$i
+# PLUTO_DNS6_$i
+# contains IPv4/IPv6 DNS server attribute received from a
+# responder, $i enumerates from 1 to the number of servers per
+# address family.
+#
+
+# define a minimum PATH environment in case it is not set
+PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/sbin"
+export PATH
+
+# uncomment to log VPN connections
+VPN_LOGGING=1
+#
+# tag put in front of each log entry:
+TAG=vpn
+#
+# syslog facility and priority used:
+FAC_PRIO=local0.notice
+#
+# to create a special vpn logging file, put the following line into
+# the syslog configuration file /etc/syslog.conf:
+#
+# local0.notice -/var/log/vpn
+
+# in order to use source IP routing the Linux kernel options
+# CONFIG_IP_ADVANCED_ROUTER and CONFIG_IP_MULTIPLE_TABLES
+# must be enabled
+#
+# special routing table for sourceip routes
+SOURCEIP_ROUTING_TABLE=220
+#
+# priority of the sourceip routing table
+SOURCEIP_ROUTING_TABLE_PRIO=220
+
+# check interface version
+case "$PLUTO_VERSION" in
+1.[0|1]) # Older Pluto?!? Play it safe, script may be using new features.
+ echo "$0: obsolete interface version \`$PLUTO_VERSION'," >&2
+ echo "$0: called by obsolete Pluto?" >&2
+ exit 2
+ ;;
+1.*) ;;
+*) echo "$0: unknown interface version \`$PLUTO_VERSION'" >&2
+ exit 2
+ ;;
+esac
+
+# check parameter(s)
+case "$1:$*" in
+':') # no parameters
+ ;;
+iptables:iptables) # due to (left/right)firewall; for default script only
+ ;;
+custom:*) # custom parameters (see above CAUTION comment)
+ ;;
+*) echo "$0: unknown parameters \`$*'" >&2
+ exit 2
+ ;;
+esac
+
+# utility functions for route manipulation
+# Meddling with this stuff should not be necessary and requires great care.
+uproute() {
+ doroute add
+ ip route flush cache
+}
+downroute() {
+ doroute delete
+ ip route flush cache
+}
+
+addsource() {
+ st=0
+ if ! ip -o route get ${PLUTO_MY_SOURCEIP%/*} | grep -q ^local
+ then
+ it="ip addr add ${PLUTO_MY_SOURCEIP%/*}/32 dev $PLUTO_INTERFACE"
+ oops="`eval $it 2>&1`"
+ st=$?
+ if test " $oops" = " " -a " $st" != " 0"
+ then
+ oops="silent error, exit status $st"
+ fi
+ if test " $oops" != " " -o " $st" != " 0"
+ then
+ echo "$0: addsource \`$it' failed ($oops)" >&2
+ fi
+ fi
+ return $st
+}
+
+doroute() {
+ st=0
+
+ if [ -z "$PLUTO_MY_SOURCEIP" ]
+ then
+ for dir in /etc/sysconfig /etc/conf.d; do
+ if [ -f "$dir/defaultsource" ]
+ then
+ . "$dir/defaultsource"
+ fi
+ done
+
+ if [ -n "$DEFAULTSOURCE" ]
+ then
+ PLUTO_MY_SOURCEIP=$DEFAULTSOURCE
+ fi
+ fi
+
+ if [ -z "$KLIPS" -a -z "$PLUTO_MY_SOURCEIP" ]
+ then
+ # leave because no route entry is required
+ return $st
+ fi
+
+ parms1="$PLUTO_PEER_CLIENT"
+
+ if [ -n "$PLUTO_NEXT_HOP" ]
+ then
+ parms2="via $PLUTO_NEXT_HOP"
+ else
+ parms2="via $PLUTO_PEER"
+ fi
+ parms2="$parms2 dev $PLUTO_INTERFACE"
+
+ parms3=
+ if [ -n "$PLUTO_MY_SOURCEIP" ]
+ then
+ if test "$1" = "add"
+ then
+ addsource
+ if ! ip rule list | grep -q "lookup $SOURCEIP_ROUTING_TABLE"
+ then
+ ip rule add pref $SOURCEIP_ROUTING_TABLE_PRIO table $SOURCEIP_ROUTING_TABLE
+ fi
+ fi
+ parms3="$parms3 src ${PLUTO_MY_SOURCEIP%/*} table $SOURCEIP_ROUTING_TABLE"
+ fi
+
+ case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
+ "0.0.0.0/0.0.0.0")
+ # opportunistic encryption work around
+ # need to provide route that eclipses default, without
+ # replacing it.
+ it="ip route $1 0.0.0.0/1 $parms2 $parms3 &&
+ ip route $1 128.0.0.0/1 $parms2 $parms3"
+ ;;
+ *) it="ip route $1 $parms1 $parms2 $parms3"
+ ;;
+ esac
+ oops="`eval $it 2>&1`"
+ st=$?
+ if test " $oops" = " " -a " $st" != " 0"
+ then
+ oops="silent error, exit status $st"
+ fi
+ if test " $oops" != " " -o " $st" != " 0"
+ then
+ echo "$0: doroute \`$it' failed ($oops)" >&2
+ fi
+ return $st
+}
+
+# in the presence of KLIPS and ipsecN interfaces do not use IPSEC_POLICY
+if [ `echo "$PLUTO_INTERFACE" | grep "ipsec"` ]
+then
+ KLIPS=1
+ IPSEC_POLICY_IN=""
+ IPSEC_POLICY_OUT=""
+else
+ KLIPS=
+ IPSEC_POLICY="-m policy --pol ipsec --proto esp --reqid $PLUTO_REQID"
+ IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
+ IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
+fi
+
+# are there port numbers?
+if [ "$PLUTO_MY_PORT" != 0 ]
+then
+ S_MY_PORT="--sport $PLUTO_MY_PORT"
+ D_MY_PORT="--dport $PLUTO_MY_PORT"
+fi
+if [ "$PLUTO_PEER_PORT" != 0 ]
+then
+ S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+ D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+fi
+
+# resolve octal escape sequences
+PLUTO_MY_ID=`printf "$PLUTO_MY_ID"`
+PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"`
+
+# the big choice
+case "$PLUTO_VERB:$1" in
+prepare-host:*|prepare-client:*)
+ if [ -z "$KLIPS" -a -z "$PLUTO_MY_SOURCEIP" ]
+ then
+ # exit because no route will be added,
+ # so that existing routes can stay
+ exit 0
+ fi
+
+ # delete possibly-existing route (preliminary to adding a route)
+ case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
+ "0.0.0.0/0.0.0.0")
+ # need to provide route that eclipses default, without
+ # replacing it.
+ parms1="0.0.0.0/1"
+ parms2="128.0.0.0/1"
+ it="ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1"
+ oops="`ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1`"
+ ;;
+ *)
+ parms="$PLUTO_PEER_CLIENT"
+ it="ip route delete $parms 2>&1"
+ oops="`ip route delete $parms 2>&1`"
+ ;;
+ esac
+ status="$?"
+ if test " $oops" = " " -a " $status" != " 0"
+ then
+ oops="silent error, exit status $status"
+ fi
+ case "$oops" in
+ *'RTNETLINK answers: No such process'*)
+ # This is what route (currently -- not documented!) gives
+ # for "could not find such a route".
+ oops=
+ status=0
+ ;;
+ esac
+ if test " $oops" != " " -o " $status" != " 0"
+ then
+ echo "$0: \`$it' failed ($oops)" >&2
+ fi
+ exit $status
+ ;;
+route-host:*|route-client:*)
+ # connection to me or my client subnet being routed
+ uproute
+ ;;
+unroute-host:*|unroute-client:*)
+ # connection to me or my client subnet being unrouted
+ downroute
+ ;;
+up-host:)
+ # connection to me coming up
+ # If you are doing a custom version, firewall commands go here.
+ PLUTO_INTERFACE=ipsec0
+ iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+ iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+ ;;
+down-host:)
+ # connection to me going down
+ # If you are doing a custom version, firewall commands go here.
+ PLUTO_INTERFACE=ipsec0
+ iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+ iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+ ;;
+up-client:)
+ # connection to my client subnet coming up
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+down-client:)
+ # connection to my client subnet going down
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+up-host:iptables)
+ # connection to me, with (left/right)firewall=yes, coming up
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+ #
+ # log IPsec host connection setup
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+ then
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+ else
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+ fi
+ fi
+ ;;
+down-host:iptables)
+ # connection to me, with (left/right)firewall=yes, going down
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+ #
+ # log IPsec host connection teardown
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+ then
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+ else
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+ fi
+ fi
+ ;;
+up-client:iptables)
+ # connection to client subnet, with (left/right)firewall=yes, coming up
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
+ then
+ iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+ iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ fi
+ #
+ # a virtual IP requires an INPUT and OUTPUT rule on the host
+ # or sometimes host access via the internal IP is needed
+ if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+ then
+ iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+ fi
+ #
+ # log IPsec client connection setup
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+ then
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ else
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ fi
+ fi
+ ;;
+down-client:iptables)
+ # connection to client subnet, with (left/right)firewall=yes, going down
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
+ then
+ iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+ $IPSEC_POLICY_OUT -j ACCEPT
+ iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT \
+ $IPSEC_POLICY_IN -j ACCEPT
+ fi
+ #
+ # a virtual IP requires an INPUT and OUTPUT rule on the host
+ # or sometimes host access via the internal IP is needed
+ if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+ then
+ iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT \
+ $IPSEC_POLICY_IN -j ACCEPT
+ iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+ $IPSEC_POLICY_OUT -j ACCEPT
+ fi
+ #
+ # log IPsec client connection teardown
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+ then
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ else
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ fi
+ fi
+ ;;
+#
+# IPv6
+#
+prepare-host-v6:*|prepare-client-v6:*)
+ ;;
+route-host-v6:*|route-client-v6:*)
+ # connection to me or my client subnet being routed
+ #uproute_v6
+ ;;
+unroute-host-v6:*|unroute-client-v6:*)
+ # connection to me or my client subnet being unrouted
+ #downroute_v6
+ ;;
+up-host-v6:)
+ # connection to me coming up
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+down-host-v6:)
+ # connection to me going down
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+up-client-v6:)
+ # connection to my client subnet coming up
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+down-client-v6:)
+ # connection to my client subnet going down
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+up-host-v6:iptables)
+ # connection to me, with (left/right)firewall=yes, coming up
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ ip6tables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ ip6tables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+ #
+ # log IPsec host connection setup
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+ then
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+ else
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+ fi
+ fi
+ ;;
+down-host-v6:iptables)
+ # connection to me, with (left/right)firewall=yes, going down
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ ip6tables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ ip6tables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+ #
+ # log IPsec host connection teardown
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+ then
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+ else
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+ fi
+ fi
+ ;;
+up-client-v6:iptables)
+ # connection to client subnet, with (left/right)firewall=yes, coming up
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/128" ]
+ then
+ ip6tables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+ ip6tables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ fi
+ #
+ # a virtual IP requires an INPUT and OUTPUT rule on the host
+ # or sometimes host access via the internal IP is needed
+ if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+ then
+ ip6tables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ ip6tables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+ fi
+ #
+ # log IPsec client connection setup
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+ then
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ else
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ fi
+ fi
+ ;;
+down-client-v6:iptables)
+ # connection to client subnet, with (left/right)firewall=yes, going down
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/128" ]
+ then
+ ip6tables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+ $IPSEC_POLICY_OUT -j ACCEPT
+ ip6tables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT \
+ $IPSEC_POLICY_IN -j ACCEPT
+ fi
+ #
+ # a virtual IP requires an INPUT and OUTPUT rule on the host
+ # or sometimes host access via the internal IP is needed
+ if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+ then
+ ip6tables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT \
+ $IPSEC_POLICY_IN -j ACCEPT
+ ip6tables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+ $IPSEC_POLICY_OUT -j ACCEPT
+ fi
+ #
+ # log IPsec client connection teardown
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+ then
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ else
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ fi
+ fi
+ ;;
+*) echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
+ exit 1
+ ;;
+esac
diff --git a/testing/tests/libipsec/host2host-cert/hosts/sun/etc/ipsec.conf b/testing/tests/libipsec/host2host-cert/hosts/sun/etc/ipsec.conf
new file mode 100644
index 000000000..becb97e04
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert/hosts/sun/etc/ipsec.conf
@@ -0,0 +1,19 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+
+conn %default
+ ikelifetime=60m
+ keylife=20m
+ rekeymargin=3m
+ keyingtries=1
+ keyexchange=ikev2
+
+conn host-host
+ left=PH_IP_SUN
+ leftcert=sunCert.pem
+ leftid=@sun.strongswan.org
+ leftupdown=/etc/updown
+ right=PH_IP_MOON
+ rightid=@moon.strongswan.org
+ auto=add
diff --git a/testing/tests/libipsec/host2host-cert/hosts/sun/etc/strongswan.conf b/testing/tests/libipsec/host2host-cert/hosts/sun/etc/strongswan.conf
new file mode 100644
index 000000000..d5c4d2718
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert/hosts/sun/etc/strongswan.conf
@@ -0,0 +1,17 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+ load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-libipsec kernel-netlink socket-default updown
+ multiple_authentication = no
+ plugins {
+ kernel-netlink {
+ fwmark = !0x42
+ }
+ socket-default {
+ fwmark = 0x42
+ }
+ kernel-libipsec {
+ allow_peer_ts = yes
+ }
+ }
+}
diff --git a/testing/tests/libipsec/host2host-cert/hosts/sun/etc/updown b/testing/tests/libipsec/host2host-cert/hosts/sun/etc/updown
new file mode 100755
index 000000000..aea6d8555
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert/hosts/sun/etc/updown
@@ -0,0 +1,705 @@
+#! /bin/sh
+# iproute2 version, default updown script
+#
+# Copyright (C) 2003-2004 Nigel Meteringham
+# Copyright (C) 2003-2004 Tuomo Soini
+# Copyright (C) 2002-2004 Michael Richardson
+# Copyright (C) 2005-2007 Andreas Steffen <andreas.steffen@strongswan.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+
+# CAUTION: Installing a new version of strongSwan will install a new
+# copy of this script, wiping out any custom changes you make. If
+# you need changes, make a copy of this under another name, and customize
+# that, and use the (left/right)updown parameters in ipsec.conf to make
+# strongSwan use yours instead of this default one.
+
+# things that this script gets (from ipsec_pluto(8) man page)
+#
+# PLUTO_VERSION
+# indicates what version of this interface is being
+# used. This document describes version 1.1. This
+# is upwardly compatible with version 1.0.
+#
+# PLUTO_VERB
+# specifies the name of the operation to be performed
+# (prepare-host, prepare-client, up-host, up-client,
+# down-host, or down-client). If the address family
+# for security gateway to security gateway communica-
+# tions is IPv6, then a suffix of -v6 is added to the
+# verb.
+#
+# PLUTO_CONNECTION
+# is the name of the connection for which we are
+# routing.
+#
+# PLUTO_NEXT_HOP
+# is the next hop to which packets bound for the peer
+# must be sent.
+#
+# PLUTO_INTERFACE
+# is the name of the ipsec interface to be used.
+#
+# PLUTO_REQID
+# is the requid of the ESP policy
+#
+# PLUTO_UNIQUEID
+# is the unique identifier of the associated IKE_SA
+#
+# PLUTO_ME
+# is the IP address of our host.
+#
+# PLUTO_MY_ID
+# is the ID of our host.
+#
+# PLUTO_MY_CLIENT
+# is the IP address / count of our client subnet. If
+# the client is just the host, this will be the
+# host's own IP address / max (where max is 32 for
+# IPv4 and 128 for IPv6).
+#
+# PLUTO_MY_CLIENT_NET
+# is the IP address of our client net. If the client
+# is just the host, this will be the host's own IP
+# address.
+#
+# PLUTO_MY_CLIENT_MASK
+# is the mask for our client net. If the client is
+# just the host, this will be 255.255.255.255.
+#
+# PLUTO_MY_SOURCEIP
+# PLUTO_MY_SOURCEIP4_$i
+# PLUTO_MY_SOURCEIP6_$i
+# contains IPv4/IPv6 virtual IP received from a responder,
+# $i enumerates from 1 to the number of IP per address family.
+# PLUTO_MY_SOURCEIP is a legacy variable and equals to the first
+# virtual IP, IPv4 or IPv6.
+#
+# PLUTO_MY_PROTOCOL
+# is the IP protocol that will be transported.
+#
+# PLUTO_MY_PORT
+# is the UDP/TCP port to which the IPsec SA is
+# restricted on our side.
+#
+# PLUTO_PEER
+# is the IP address of our peer.
+#
+# PLUTO_PEER_ID
+# is the ID of our peer.
+#
+# PLUTO_PEER_CA
+# is the CA which issued the cert of our peer.
+#
+# PLUTO_PEER_CLIENT
+# is the IP address / count of the peer's client sub-
+# net. If the client is just the peer, this will be
+# the peer's own IP address / max (where max is 32
+# for IPv4 and 128 for IPv6).
+#
+# PLUTO_PEER_CLIENT_NET
+# is the IP address of the peer's client net. If the
+# client is just the peer, this will be the peer's
+# own IP address.
+#
+# PLUTO_PEER_CLIENT_MASK
+# is the mask for the peer's client net. If the
+# client is just the peer, this will be
+# 255.255.255.255.
+#
+# PLUTO_PEER_PROTOCOL
+# is the IP protocol that will be transported.
+#
+# PLUTO_PEER_PORT
+# is the UDP/TCP port to which the IPsec SA is
+# restricted on the peer side.
+#
+# PLUTO_XAUTH_ID
+# is an optional user ID employed by the XAUTH protocol
+#
+# PLUTO_MARK_IN
+# is an optional XFRM mark set on the inbound IPsec SA
+#
+# PLUTO_MARK_OUT
+# is an optional XFRM mark set on the outbound IPsec SA
+#
+# PLUTO_UDP_ENC
+# contains the remote UDP port in the case of ESP_IN_UDP
+# encapsulation
+#
+# PLUTO_DNS4_$i
+# PLUTO_DNS6_$i
+# contains IPv4/IPv6 DNS server attribute received from a
+# responder, $i enumerates from 1 to the number of servers per
+# address family.
+#
+
+# define a minimum PATH environment in case it is not set
+PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/sbin"
+export PATH
+
+# uncomment to log VPN connections
+VPN_LOGGING=1
+#
+# tag put in front of each log entry:
+TAG=vpn
+#
+# syslog facility and priority used:
+FAC_PRIO=local0.notice
+#
+# to create a special vpn logging file, put the following line into
+# the syslog configuration file /etc/syslog.conf:
+#
+# local0.notice -/var/log/vpn
+
+# in order to use source IP routing the Linux kernel options
+# CONFIG_IP_ADVANCED_ROUTER and CONFIG_IP_MULTIPLE_TABLES
+# must be enabled
+#
+# special routing table for sourceip routes
+SOURCEIP_ROUTING_TABLE=220
+#
+# priority of the sourceip routing table
+SOURCEIP_ROUTING_TABLE_PRIO=220
+
+# check interface version
+case "$PLUTO_VERSION" in
+1.[0|1]) # Older Pluto?!? Play it safe, script may be using new features.
+ echo "$0: obsolete interface version \`$PLUTO_VERSION'," >&2
+ echo "$0: called by obsolete Pluto?" >&2
+ exit 2
+ ;;
+1.*) ;;
+*) echo "$0: unknown interface version \`$PLUTO_VERSION'" >&2
+ exit 2
+ ;;
+esac
+
+# check parameter(s)
+case "$1:$*" in
+':') # no parameters
+ ;;
+iptables:iptables) # due to (left/right)firewall; for default script only
+ ;;
+custom:*) # custom parameters (see above CAUTION comment)
+ ;;
+*) echo "$0: unknown parameters \`$*'" >&2
+ exit 2
+ ;;
+esac
+
+# utility functions for route manipulation
+# Meddling with this stuff should not be necessary and requires great care.
+uproute() {
+ doroute add
+ ip route flush cache
+}
+downroute() {
+ doroute delete
+ ip route flush cache
+}
+
+addsource() {
+ st=0
+ if ! ip -o route get ${PLUTO_MY_SOURCEIP%/*} | grep -q ^local
+ then
+ it="ip addr add ${PLUTO_MY_SOURCEIP%/*}/32 dev $PLUTO_INTERFACE"
+ oops="`eval $it 2>&1`"
+ st=$?
+ if test " $oops" = " " -a " $st" != " 0"
+ then
+ oops="silent error, exit status $st"
+ fi
+ if test " $oops" != " " -o " $st" != " 0"
+ then
+ echo "$0: addsource \`$it' failed ($oops)" >&2
+ fi
+ fi
+ return $st
+}
+
+doroute() {
+ st=0
+
+ if [ -z "$PLUTO_MY_SOURCEIP" ]
+ then
+ for dir in /etc/sysconfig /etc/conf.d; do
+ if [ -f "$dir/defaultsource" ]
+ then
+ . "$dir/defaultsource"
+ fi
+ done
+
+ if [ -n "$DEFAULTSOURCE" ]
+ then
+ PLUTO_MY_SOURCEIP=$DEFAULTSOURCE
+ fi
+ fi
+
+ if [ -z "$KLIPS" -a -z "$PLUTO_MY_SOURCEIP" ]
+ then
+ # leave because no route entry is required
+ return $st
+ fi
+
+ parms1="$PLUTO_PEER_CLIENT"
+
+ if [ -n "$PLUTO_NEXT_HOP" ]
+ then
+ parms2="via $PLUTO_NEXT_HOP"
+ else
+ parms2="via $PLUTO_PEER"
+ fi
+ parms2="$parms2 dev $PLUTO_INTERFACE"
+
+ parms3=
+ if [ -n "$PLUTO_MY_SOURCEIP" ]
+ then
+ if test "$1" = "add"
+ then
+ addsource
+ if ! ip rule list | grep -q "lookup $SOURCEIP_ROUTING_TABLE"
+ then
+ ip rule add pref $SOURCEIP_ROUTING_TABLE_PRIO table $SOURCEIP_ROUTING_TABLE
+ fi
+ fi
+ parms3="$parms3 src ${PLUTO_MY_SOURCEIP%/*} table $SOURCEIP_ROUTING_TABLE"
+ fi
+
+ case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
+ "0.0.0.0/0.0.0.0")
+ # opportunistic encryption work around
+ # need to provide route that eclipses default, without
+ # replacing it.
+ it="ip route $1 0.0.0.0/1 $parms2 $parms3 &&
+ ip route $1 128.0.0.0/1 $parms2 $parms3"
+ ;;
+ *) it="ip route $1 $parms1 $parms2 $parms3"
+ ;;
+ esac
+ oops="`eval $it 2>&1`"
+ st=$?
+ if test " $oops" = " " -a " $st" != " 0"
+ then
+ oops="silent error, exit status $st"
+ fi
+ if test " $oops" != " " -o " $st" != " 0"
+ then
+ echo "$0: doroute \`$it' failed ($oops)" >&2
+ fi
+ return $st
+}
+
+# in the presence of KLIPS and ipsecN interfaces do not use IPSEC_POLICY
+if [ `echo "$PLUTO_INTERFACE" | grep "ipsec"` ]
+then
+ KLIPS=1
+ IPSEC_POLICY_IN=""
+ IPSEC_POLICY_OUT=""
+else
+ KLIPS=
+ IPSEC_POLICY="-m policy --pol ipsec --proto esp --reqid $PLUTO_REQID"
+ IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
+ IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
+fi
+
+# are there port numbers?
+if [ "$PLUTO_MY_PORT" != 0 ]
+then
+ S_MY_PORT="--sport $PLUTO_MY_PORT"
+ D_MY_PORT="--dport $PLUTO_MY_PORT"
+fi
+if [ "$PLUTO_PEER_PORT" != 0 ]
+then
+ S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+ D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+fi
+
+# resolve octal escape sequences
+PLUTO_MY_ID=`printf "$PLUTO_MY_ID"`
+PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"`
+
+# the big choice
+case "$PLUTO_VERB:$1" in
+prepare-host:*|prepare-client:*)
+ if [ -z "$KLIPS" -a -z "$PLUTO_MY_SOURCEIP" ]
+ then
+ # exit because no route will be added,
+ # so that existing routes can stay
+ exit 0
+ fi
+
+ # delete possibly-existing route (preliminary to adding a route)
+ case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
+ "0.0.0.0/0.0.0.0")
+ # need to provide route that eclipses default, without
+ # replacing it.
+ parms1="0.0.0.0/1"
+ parms2="128.0.0.0/1"
+ it="ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1"
+ oops="`ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1`"
+ ;;
+ *)
+ parms="$PLUTO_PEER_CLIENT"
+ it="ip route delete $parms 2>&1"
+ oops="`ip route delete $parms 2>&1`"
+ ;;
+ esac
+ status="$?"
+ if test " $oops" = " " -a " $status" != " 0"
+ then
+ oops="silent error, exit status $status"
+ fi
+ case "$oops" in
+ *'RTNETLINK answers: No such process'*)
+ # This is what route (currently -- not documented!) gives
+ # for "could not find such a route".
+ oops=
+ status=0
+ ;;
+ esac
+ if test " $oops" != " " -o " $status" != " 0"
+ then
+ echo "$0: \`$it' failed ($oops)" >&2
+ fi
+ exit $status
+ ;;
+route-host:*|route-client:*)
+ # connection to me or my client subnet being routed
+ uproute
+ ;;
+unroute-host:*|unroute-client:*)
+ # connection to me or my client subnet being unrouted
+ downroute
+ ;;
+up-host:)
+ # connection to me coming up
+ # If you are doing a custom version, firewall commands go here.
+ PLUTO_INTERFACE=ipsec0
+ iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+ iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+ ;;
+down-host:)
+ # connection to me going down
+ # If you are doing a custom version, firewall commands go here.
+ PLUTO_INTERFACE=ipsec0
+ iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+ iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT -j ACCEPT
+ ;;
+up-client:)
+ # connection to my client subnet coming up
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+down-client:)
+ # connection to my client subnet going down
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+up-host:iptables)
+ # connection to me, with (left/right)firewall=yes, coming up
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+ #
+ # log IPsec host connection setup
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+ then
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+ else
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+ fi
+ fi
+ ;;
+down-host:iptables)
+ # connection to me, with (left/right)firewall=yes, going down
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+ #
+ # log IPsec host connection teardown
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+ then
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+ else
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+ fi
+ fi
+ ;;
+up-client:iptables)
+ # connection to client subnet, with (left/right)firewall=yes, coming up
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
+ then
+ iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+ iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ fi
+ #
+ # a virtual IP requires an INPUT and OUTPUT rule on the host
+ # or sometimes host access via the internal IP is needed
+ if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+ then
+ iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+ fi
+ #
+ # log IPsec client connection setup
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+ then
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ else
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ fi
+ fi
+ ;;
+down-client:iptables)
+ # connection to client subnet, with (left/right)firewall=yes, going down
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
+ then
+ iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+ $IPSEC_POLICY_OUT -j ACCEPT
+ iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT \
+ $IPSEC_POLICY_IN -j ACCEPT
+ fi
+ #
+ # a virtual IP requires an INPUT and OUTPUT rule on the host
+ # or sometimes host access via the internal IP is needed
+ if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+ then
+ iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT \
+ $IPSEC_POLICY_IN -j ACCEPT
+ iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+ $IPSEC_POLICY_OUT -j ACCEPT
+ fi
+ #
+ # log IPsec client connection teardown
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
+ then
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ else
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ fi
+ fi
+ ;;
+#
+# IPv6
+#
+prepare-host-v6:*|prepare-client-v6:*)
+ ;;
+route-host-v6:*|route-client-v6:*)
+ # connection to me or my client subnet being routed
+ #uproute_v6
+ ;;
+unroute-host-v6:*|unroute-client-v6:*)
+ # connection to me or my client subnet being unrouted
+ #downroute_v6
+ ;;
+up-host-v6:)
+ # connection to me coming up
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+down-host-v6:)
+ # connection to me going down
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+up-client-v6:)
+ # connection to my client subnet coming up
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+down-client-v6:)
+ # connection to my client subnet going down
+ # If you are doing a custom version, firewall commands go here.
+ ;;
+up-host-v6:iptables)
+ # connection to me, with (left/right)firewall=yes, coming up
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ ip6tables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ ip6tables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+ #
+ # log IPsec host connection setup
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+ then
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+ else
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+ fi
+ fi
+ ;;
+down-host-v6:iptables)
+ # connection to me, with (left/right)firewall=yes, going down
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ ip6tables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ ip6tables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
+ #
+ # log IPsec host connection teardown
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+ then
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
+ else
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+ fi
+ fi
+ ;;
+up-client-v6:iptables)
+ # connection to client subnet, with (left/right)firewall=yes, coming up
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/128" ]
+ then
+ ip6tables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+ ip6tables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ fi
+ #
+ # a virtual IP requires an INPUT and OUTPUT rule on the host
+ # or sometimes host access via the internal IP is needed
+ if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+ then
+ ip6tables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+ ip6tables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
+ fi
+ #
+ # log IPsec client connection setup
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+ then
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ else
+ logger -t $TAG -p $FAC_PRIO \
+ "+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ fi
+ fi
+ ;;
+down-client-v6:iptables)
+ # connection to client subnet, with (left/right)firewall=yes, going down
+ # This is used only by the default updown script, not by your custom
+ # ones, so do not mess with it; see CAUTION comment up at top.
+ if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/128" ]
+ then
+ ip6tables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+ $IPSEC_POLICY_OUT -j ACCEPT
+ ip6tables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT \
+ $IPSEC_POLICY_IN -j ACCEPT
+ fi
+ #
+ # a virtual IP requires an INPUT and OUTPUT rule on the host
+ # or sometimes host access via the internal IP is needed
+ if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+ then
+ ip6tables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT \
+ $IPSEC_POLICY_IN -j ACCEPT
+ ip6tables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+ $IPSEC_POLICY_OUT -j ACCEPT
+ fi
+ #
+ # log IPsec client connection teardown
+ if [ $VPN_LOGGING ]
+ then
+ if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/128" ]
+ then
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ else
+ logger -t $TAG -p $FAC_PRIO -- \
+ "- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+ fi
+ fi
+ ;;
+*) echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
+ exit 1
+ ;;
+esac
diff --git a/testing/tests/libipsec/host2host-cert/posttest.dat b/testing/tests/libipsec/host2host-cert/posttest.dat
new file mode 100644
index 000000000..8b6052f38
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert/posttest.dat
@@ -0,0 +1,6 @@
+moon::ipsec stop
+sun::ipsec stop
+moon::iptables-restore < /etc/iptables.flush
+sun::iptables-restore < /etc/iptables.flush
+moon::sysctl --pattern net.ipv4.conf.all.rp_filter --system
+sun::sysctl --pattern net.ipv4.conf.all.rp_filter --system
diff --git a/testing/tests/libipsec/host2host-cert/pretest.dat b/testing/tests/libipsec/host2host-cert/pretest.dat
new file mode 100644
index 000000000..d8d30af02
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert/pretest.dat
@@ -0,0 +1,8 @@
+moon::sysctl -w net.ipv4.conf.all.rp_filter=2
+sun::sysctl -w net.ipv4.conf.all.rp_filter=2
+moon::iptables-restore < /etc/iptables.rules
+sun::iptables-restore < /etc/iptables.rules
+moon::ipsec start
+sun::ipsec start
+moon::sleep 1
+moon::ipsec up host-host
diff --git a/testing/tests/libipsec/host2host-cert/test.conf b/testing/tests/libipsec/host2host-cert/test.conf
new file mode 100644
index 000000000..9647dc6a2
--- /dev/null
+++ b/testing/tests/libipsec/host2host-cert/test.conf
@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# guest instances used for this test
+
+# All guest instances that are required for this test
+#
+VIRTHOSTS="moon winnetou sun"
+
+# Corresponding block diagram
+#
+DIAGRAM="m-w-s.png"
+
+# Guest instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="sun"
+
+# Guest instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon sun"
diff --git a/testing/tests/libipsec/rw-suite-b/hosts/moon/etc/ipsec.conf b/testing/tests/libipsec/rw-suite-b/hosts/moon/etc/ipsec.conf
index 733592087..abb34ac91 100644
--- a/testing/tests/libipsec/rw-suite-b/hosts/moon/etc/ipsec.conf
+++ b/testing/tests/libipsec/rw-suite-b/hosts/moon/etc/ipsec.conf
@@ -1,6 +1,7 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
+ charondebug="knl 3, esp 3"
conn %default
ikelifetime=60m
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 23:11:20 +0000