diff options
Diffstat (limited to 'testing/tests/tnc')
147 files changed, 42 insertions, 4635 deletions
diff --git a/testing/tests/tnc/tnccs-11-fhh/description.txt b/testing/tests/tnc/tnccs-11-fhh/description.txt deleted file mode 100644 index 8ce1157e9..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/description.txt +++ /dev/null @@ -1,13 +0,0 @@ -The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b> -using EAP-TTLS authentication only with the gateway presenting a server certificate and -the clients doing EAP-MD5 password-based authentication. -In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the -health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface. -The Dummy IMC and IMV from the -<a href="http://trust.f4.hs-hannover.de/projects/tncatfhh.html" target="popup"> -<b>TNC@FHH</b></a> project are used which communicate over a proprietary protocol. -<p> -<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements the -clients are connected by gateway <b>moon</b> to the "rw-allow" and "rw-isolate" subnets, -respectively. - diff --git a/testing/tests/tnc/tnccs-11-fhh/evaltest.dat b/testing/tests/tnc/tnccs-11-fhh/evaltest.dat deleted file mode 100644 index 0b7655bdd..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/evaltest.dat +++ /dev/null @@ -1,18 +0,0 @@ -carol::cat /var/log/daemon.log::TNCCS-Recommendation.*allow::YES -carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established::YES -carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP successful::YES -dave:: cat /var/log/daemon.log::TNCCS-Recommendation.*isolate::YES -dave:: cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established::YES -dave:: cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP successful::YES -moon:: cat /var/log/daemon.log::added group membership 'allow'::YES -moon:: cat /var/log/daemon.log::authentication of 'carol@strongswan.org' with EAP successful::YES -moon:: cat /var/log/daemon.log::added group membership 'isolate'::YES -moon:: cat /var/log/daemon.log::authentication of 'dave@strongswan.org' with EAP successful::YES -carol::swanctl --list-sas --raw 2> /dev/null::home.*version=2 state=ESTABLISHED local-host=192.168.0.100 local-port=4500 local-id=carol@strongswan.org remote-host=192.168.0.1 remote-port=4500 remote-id=moon.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*home.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[192.168.0.100/32] remote-ts=\[10.1.0.0/28]::YES -dave:: swanctl --list-sas --raw 2> /dev/null::home.*version=2 state=ESTABLISHED local-host=192.168.0.200 local-port=4500 local-id=dave@strongswan.org remote-host=192.168.0.1 remote-port=4500 remote-id=moon.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*home.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[192.168.0.200/32] remote-ts=\[10.1.0.16/28]::YES -moon:: swanctl --list-sas --ike-id 1 --raw 2> /dev/null::rw-allow.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=4500 local-id=moon.strongswan.org remote-host=192.168.0.100 remote-port=4500 remote-id=carol@strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*rw-allow.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[10.1.0.0/28] remote-ts=\[192.168.0.100/32]::YES -moon:: swanctl --list-sas --ike-id 2 --raw 2> /dev/null::rw-isolate.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=4500 local-id=moon.strongswan.org remote-host=192.168.0.200 remote-port=4500 remote-id=dave@strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*rw-isolate.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[10.1.0.16/28] remote-ts=\[192.168.0.200/32]::YES -carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_.eq=1::YES -carol::ping -c 1 -W 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_.eq=1::NO -dave:: ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_.eq=1::YES -dave:: ping -c 1 -W 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_.eq=1::NO diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/init.d/charon b/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/init.d/charon deleted file mode 100755 index bf3a6891a..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/init.d/charon +++ /dev/null @@ -1,158 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: charon -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: strongSwan charon IKE daemon -# Description: with swanctl the strongSwan charon daemon must be -# running in the background -### END INIT INFO - -# Author: Andreas Steffen <andreas.steffen@strongswa.org> -# -# Do NOT "set -e" - -# PATH should only include /usr/* if it runs after the mountnfs.sh script -PATH=/sbin:/usr/sbin:/usr/local/sbin:/bin:/usr/bin -DESC="strongSwan charon IKE daemon" -NAME=charon -DAEMON=/usr/local/libexec/ipsec/$NAME -DAEMON_ARGS="" -PIDFILE=/var/run/$NAME.pid -SCRIPTNAME=/etc/init.d/charon - -export LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties - -# Exit if the package is not installed -[ -x "$DAEMON" ] || exit 0 - -# Read configuration variable file if it is present -[ -r /etc/default/$NAME ] && . /etc/default/$NAME - -# Load the VERBOSE setting and other rcS variables -. /lib/init/vars.sh - -# Define LSB log_* functions. -# Depend on lsb-base (>= 3.2-14) to ensure that this file is present -# and status_of_proc is working. -. /lib/lsb/init-functions - -# -# Function that starts the daemon/service -# -do_start() -{ - # Return - # 0 if daemon has been started - # 1 if daemon was already running - # 2 if daemon could not be started - start-stop-daemon --start --quiet --background --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ - || return 1 - start-stop-daemon --start --quiet --background --pidfile $PIDFILE --exec $DAEMON -- \ - $DAEMON_ARGS \ - || return 2 - # Add code here, if necessary, that waits for the process to be ready - # to handle requests from services started subsequently which depend - # on this one. As a last resort, sleep for some time. -} - -# -# Function that stops the daemon/service -# -do_stop() -{ - # Return - # 0 if daemon has been stopped - # 1 if daemon was already stopped - # 2 if daemon could not be stopped - # other if a failure occurred - start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME - RETVAL="$?" - [ "$RETVAL" = 2 ] && return 2 - # Wait for children to finish too if this is a daemon that forks - # and if the daemon is only ever run from this initscript. - # If the above conditions are not satisfied then add some other code - # that waits for the process to drop all resources that could be - # needed by services started subsequently. A last resort is to - # sleep for some time. - start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON - [ "$?" = 2 ] && return 2 - # Many daemons don't delete their pidfiles when they exit. - rm -f $PIDFILE - return "$RETVAL" -} - -# -# Function that sends a SIGHUP to the daemon/service -# -do_reload() { - # - # If the daemon can reload its configuration without - # restarting (for example, when it is sent a SIGHUP), - # then implement that here. - # - start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME - return 0 -} - -case "$1" in - start) - [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" - do_start - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - stop) - [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" - do_stop - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - status) - status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? - ;; - #reload|force-reload) - # - # If do_reload() is not implemented then leave this commented out - # and leave 'force-reload' as an alias for 'restart'. - # - #log_daemon_msg "Reloading $DESC" "$NAME" - #do_reload - #log_end_msg $? - #;; - restart|force-reload) - # - # If the "reload" option is implemented then remove the - # 'force-reload' alias - # - log_daemon_msg "Restarting $DESC" "$NAME" - do_stop - case "$?" in - 0|1) - do_start - case "$?" in - 0) log_end_msg 0 ;; - 1) log_end_msg 1 ;; # Old process is still running - *) log_end_msg 1 ;; # Failed to start - esac - ;; - *) - # Failed to stop - log_end_msg 1 - ;; - esac - ;; - *) - #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 - echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 - exit 3 - ;; -esac - -: diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/strongswan.conf deleted file mode 100644 index b094a3aaa..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/strongswan.conf +++ /dev/null @@ -1,22 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce aes sha1 sha2 md5 pem pkcs1 gmp hmac x509 revocation curl vici kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnc-tnccs tnccs-11 updown - - multiple_authentication=no - - syslog { - daemon { - tnc = 3 - } - } - plugins { - eap-tnc { - protocol = tnccs-1.1 - } - } -} - -libtls { - suites = TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 -} diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/swanctl/swanctl.conf deleted file mode 100644 index 0f266dd93..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,35 +0,0 @@ -connections { - - home { - local_addrs = 192.168.0.100 - remote_addrs = 192.168.0.1 - - local { - auth = eap-ttls - id = carol@strongswan.org - } - remote { - auth = eap-ttls - id = moon.strongswan.org - } - children { - home { - remote_ts = 10.1.0.0/16 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-modp3072 - } -} - -secrets { - - eap { - id = carol@strongswan.org - secret = "Ar3etTnp" - } -} diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/tnc/dummyimc.file b/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/tnc/dummyimc.file deleted file mode 100644 index f5da834c0..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/tnc/dummyimc.file +++ /dev/null @@ -1 +0,0 @@ -allow diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/tnc/log4cxx.properties b/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/tnc/log4cxx.properties deleted file mode 100644 index b1c694107..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/tnc/log4cxx.properties +++ /dev/null @@ -1,15 +0,0 @@ -# Set root logger level to DEBUG and its appenders to A1 and A2. -log4j.rootLogger=DEBUG, A1, A2 - -# A1 is set to be a ConsoleAppender. -log4j.appender.A1=org.apache.log4j.ConsoleAppender -log4j.appender.A1.layout=org.apache.log4j.PatternLayout -log4j.appender.A1.layout.ConversionPattern=--[IMC] %m%n - -# A2 is set to be a SyslogAppender -log4j.appender.A2=org.apache.log4j.net.SyslogAppender -log4j.appender.A2.Facility=DAEMON -log4j.appender.A2.SyslogHost=localhost -log4j.appender.A2.Threshold=DEBUG -log4j.appender.A2.layout=org.apache.log4j.PatternLayout -log4j.appender.A2.layout.ConversionPattern=--[IMC] %m%n diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/tnc_config b/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/tnc_config deleted file mode 100644 index d2fabe109..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/carol/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMC configuration file for strongSwan client - -IMC "Dummy" /usr/local/lib/libdummyimc.so -#IMC "HostScanner" /usr/local/lib/libhostscannerimc.so diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/init.d/charon b/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/init.d/charon deleted file mode 100755 index bf3a6891a..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/init.d/charon +++ /dev/null @@ -1,158 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: charon -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: strongSwan charon IKE daemon -# Description: with swanctl the strongSwan charon daemon must be -# running in the background -### END INIT INFO - -# Author: Andreas Steffen <andreas.steffen@strongswa.org> -# -# Do NOT "set -e" - -# PATH should only include /usr/* if it runs after the mountnfs.sh script -PATH=/sbin:/usr/sbin:/usr/local/sbin:/bin:/usr/bin -DESC="strongSwan charon IKE daemon" -NAME=charon -DAEMON=/usr/local/libexec/ipsec/$NAME -DAEMON_ARGS="" -PIDFILE=/var/run/$NAME.pid -SCRIPTNAME=/etc/init.d/charon - -export LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties - -# Exit if the package is not installed -[ -x "$DAEMON" ] || exit 0 - -# Read configuration variable file if it is present -[ -r /etc/default/$NAME ] && . /etc/default/$NAME - -# Load the VERBOSE setting and other rcS variables -. /lib/init/vars.sh - -# Define LSB log_* functions. -# Depend on lsb-base (>= 3.2-14) to ensure that this file is present -# and status_of_proc is working. -. /lib/lsb/init-functions - -# -# Function that starts the daemon/service -# -do_start() -{ - # Return - # 0 if daemon has been started - # 1 if daemon was already running - # 2 if daemon could not be started - start-stop-daemon --start --quiet --background --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ - || return 1 - start-stop-daemon --start --quiet --background --pidfile $PIDFILE --exec $DAEMON -- \ - $DAEMON_ARGS \ - || return 2 - # Add code here, if necessary, that waits for the process to be ready - # to handle requests from services started subsequently which depend - # on this one. As a last resort, sleep for some time. -} - -# -# Function that stops the daemon/service -# -do_stop() -{ - # Return - # 0 if daemon has been stopped - # 1 if daemon was already stopped - # 2 if daemon could not be stopped - # other if a failure occurred - start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME - RETVAL="$?" - [ "$RETVAL" = 2 ] && return 2 - # Wait for children to finish too if this is a daemon that forks - # and if the daemon is only ever run from this initscript. - # If the above conditions are not satisfied then add some other code - # that waits for the process to drop all resources that could be - # needed by services started subsequently. A last resort is to - # sleep for some time. - start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON - [ "$?" = 2 ] && return 2 - # Many daemons don't delete their pidfiles when they exit. - rm -f $PIDFILE - return "$RETVAL" -} - -# -# Function that sends a SIGHUP to the daemon/service -# -do_reload() { - # - # If the daemon can reload its configuration without - # restarting (for example, when it is sent a SIGHUP), - # then implement that here. - # - start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME - return 0 -} - -case "$1" in - start) - [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" - do_start - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - stop) - [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" - do_stop - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - status) - status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? - ;; - #reload|force-reload) - # - # If do_reload() is not implemented then leave this commented out - # and leave 'force-reload' as an alias for 'restart'. - # - #log_daemon_msg "Reloading $DESC" "$NAME" - #do_reload - #log_end_msg $? - #;; - restart|force-reload) - # - # If the "reload" option is implemented then remove the - # 'force-reload' alias - # - log_daemon_msg "Restarting $DESC" "$NAME" - do_stop - case "$?" in - 0|1) - do_start - case "$?" in - 0) log_end_msg 0 ;; - 1) log_end_msg 1 ;; # Old process is still running - *) log_end_msg 1 ;; # Failed to start - esac - ;; - *) - # Failed to stop - log_end_msg 1 - ;; - esac - ;; - *) - #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 - echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 - exit 3 - ;; -esac - -: diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/strongswan.conf deleted file mode 100644 index b094a3aaa..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/strongswan.conf +++ /dev/null @@ -1,22 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce aes sha1 sha2 md5 pem pkcs1 gmp hmac x509 revocation curl vici kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnc-tnccs tnccs-11 updown - - multiple_authentication=no - - syslog { - daemon { - tnc = 3 - } - } - plugins { - eap-tnc { - protocol = tnccs-1.1 - } - } -} - -libtls { - suites = TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 -} diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/swanctl/swanctl.conf deleted file mode 100644 index 989ab88c7..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,35 +0,0 @@ -connections { - - home { - local_addrs = 192.168.0.200 - remote_addrs = 192.168.0.1 - - local { - auth = eap-ttls - id = dave@strongswan.org - } - remote { - auth = eap-ttls - id = moon.strongswan.org - } - children { - home { - remote_ts = 10.1.0.0/16 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-modp3072 - } -} - -secrets { - - eap { - id = dave@strongswan.org - secret = "W7R0g3do" - } -} diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/tnc/dummyimc.file b/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/tnc/dummyimc.file deleted file mode 100644 index c20b5e57f..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/tnc/dummyimc.file +++ /dev/null @@ -1 +0,0 @@ -isolate
\ No newline at end of file diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/tnc/log4cxx.properties b/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/tnc/log4cxx.properties deleted file mode 100644 index b1c694107..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/tnc/log4cxx.properties +++ /dev/null @@ -1,15 +0,0 @@ -# Set root logger level to DEBUG and its appenders to A1 and A2. -log4j.rootLogger=DEBUG, A1, A2 - -# A1 is set to be a ConsoleAppender. -log4j.appender.A1=org.apache.log4j.ConsoleAppender -log4j.appender.A1.layout=org.apache.log4j.PatternLayout -log4j.appender.A1.layout.ConversionPattern=--[IMC] %m%n - -# A2 is set to be a SyslogAppender -log4j.appender.A2=org.apache.log4j.net.SyslogAppender -log4j.appender.A2.Facility=DAEMON -log4j.appender.A2.SyslogHost=localhost -log4j.appender.A2.Threshold=DEBUG -log4j.appender.A2.layout=org.apache.log4j.PatternLayout -log4j.appender.A2.layout.ConversionPattern=--[IMC] %m%n diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/tnc_config b/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/tnc_config deleted file mode 100644 index d2fabe109..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/dave/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMC configuration file for strongSwan client - -IMC "Dummy" /usr/local/lib/libdummyimc.so -#IMC "HostScanner" /usr/local/lib/libhostscannerimc.so diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/init.d/charon b/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/init.d/charon deleted file mode 100755 index bf3a6891a..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/init.d/charon +++ /dev/null @@ -1,158 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: charon -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: strongSwan charon IKE daemon -# Description: with swanctl the strongSwan charon daemon must be -# running in the background -### END INIT INFO - -# Author: Andreas Steffen <andreas.steffen@strongswa.org> -# -# Do NOT "set -e" - -# PATH should only include /usr/* if it runs after the mountnfs.sh script -PATH=/sbin:/usr/sbin:/usr/local/sbin:/bin:/usr/bin -DESC="strongSwan charon IKE daemon" -NAME=charon -DAEMON=/usr/local/libexec/ipsec/$NAME -DAEMON_ARGS="" -PIDFILE=/var/run/$NAME.pid -SCRIPTNAME=/etc/init.d/charon - -export LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties - -# Exit if the package is not installed -[ -x "$DAEMON" ] || exit 0 - -# Read configuration variable file if it is present -[ -r /etc/default/$NAME ] && . /etc/default/$NAME - -# Load the VERBOSE setting and other rcS variables -. /lib/init/vars.sh - -# Define LSB log_* functions. -# Depend on lsb-base (>= 3.2-14) to ensure that this file is present -# and status_of_proc is working. -. /lib/lsb/init-functions - -# -# Function that starts the daemon/service -# -do_start() -{ - # Return - # 0 if daemon has been started - # 1 if daemon was already running - # 2 if daemon could not be started - start-stop-daemon --start --quiet --background --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ - || return 1 - start-stop-daemon --start --quiet --background --pidfile $PIDFILE --exec $DAEMON -- \ - $DAEMON_ARGS \ - || return 2 - # Add code here, if necessary, that waits for the process to be ready - # to handle requests from services started subsequently which depend - # on this one. As a last resort, sleep for some time. -} - -# -# Function that stops the daemon/service -# -do_stop() -{ - # Return - # 0 if daemon has been stopped - # 1 if daemon was already stopped - # 2 if daemon could not be stopped - # other if a failure occurred - start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME - RETVAL="$?" - [ "$RETVAL" = 2 ] && return 2 - # Wait for children to finish too if this is a daemon that forks - # and if the daemon is only ever run from this initscript. - # If the above conditions are not satisfied then add some other code - # that waits for the process to drop all resources that could be - # needed by services started subsequently. A last resort is to - # sleep for some time. - start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON - [ "$?" = 2 ] && return 2 - # Many daemons don't delete their pidfiles when they exit. - rm -f $PIDFILE - return "$RETVAL" -} - -# -# Function that sends a SIGHUP to the daemon/service -# -do_reload() { - # - # If the daemon can reload its configuration without - # restarting (for example, when it is sent a SIGHUP), - # then implement that here. - # - start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME - return 0 -} - -case "$1" in - start) - [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" - do_start - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - stop) - [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" - do_stop - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - status) - status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? - ;; - #reload|force-reload) - # - # If do_reload() is not implemented then leave this commented out - # and leave 'force-reload' as an alias for 'restart'. - # - #log_daemon_msg "Reloading $DESC" "$NAME" - #do_reload - #log_end_msg $? - #;; - restart|force-reload) - # - # If the "reload" option is implemented then remove the - # 'force-reload' alias - # - log_daemon_msg "Restarting $DESC" "$NAME" - do_stop - case "$?" in - 0|1) - do_start - case "$?" in - 0) log_end_msg 0 ;; - 1) log_end_msg 1 ;; # Old process is still running - *) log_end_msg 1 ;; # Failed to start - esac - ;; - *) - # Failed to stop - log_end_msg 1 - ;; - esac - ;; - *) - #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 - echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 - exit 3 - ;; -esac - -: diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/strongswan.conf deleted file mode 100644 index aacee2221..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/strongswan.conf +++ /dev/null @@ -1,28 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce aes sha1 sha2 md5 pem pkcs1 gmp hmac x509 revocation curl vici kernel-netlink socket-default eap-identity eap-ttls eap-md5 eap-tnc tnc-tnccs tnccs-11 tnc-imv updown - - multiple_authentication = no - - syslog { - daemon { - tnc = 3 - } - } - plugins { - eap-ttls { - phase2_method = md5 - phase2_piggyback = yes - phase2_tnc = yes - phase2_tnc_method = tnc - } - eap-tnc { - protocol = tnccs-1.1 - } - } -} - -libtls { - suites = TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 -} diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/swanctl/swanctl.conf deleted file mode 100644 index 1238c1a91..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,64 +0,0 @@ -connections { - - rw-allow { - local_addrs = 192.168.0.1 - - local { - auth = eap-ttls - id = moon.strongswan.org - } - remote { - auth = eap-ttls - id = *@strongswan.org - groups = allow - } - children { - rw-allow { - local_ts = 10.1.0.0/28 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-modp3072 - } - - rw-isolate { - local_addrs = 192.168.0.1 - - local { - auth = eap-ttls - id = moon.strongswan.org - } - remote { - auth = eap-ttls - id = *@strongswan.org - groups = isolate - } - children { - rw-isolate { - local_ts = 10.1.0.16/28 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-modp3072 - } -} - -secrets { - - eap-carol { - id = carol@strongswan.org - secret = "Ar3etTnp" - } - eap-dave { - id = dave@strongswan.org - secret = "W7R0g3do" - } -} diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/tnc/dummyimv.policy b/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/tnc/dummyimv.policy deleted file mode 100644 index d00491fd7..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/tnc/dummyimv.policy +++ /dev/null @@ -1 +0,0 @@ -1 diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/tnc/hostscannerimv.policy b/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/tnc/hostscannerimv.policy deleted file mode 100644 index d8215dd3c..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/tnc/hostscannerimv.policy +++ /dev/null @@ -1,40 +0,0 @@ -#FTP - File Transfer Protocol -TCP 20 = whatever -TCP 21 = close - -#SSH - Secure Shell -TCP 22 = whatever - -#Telnet -TCP 23 = close - -#E-Mail -# -#SMTP - Simple Mail Transfer Protocol -TCP 25 = close -TCP 587 = close -#POP3 - Post Office Protocol version 3 -TCP 110 = close -TCP 995 = close - -#DNS - Domain Name System -UDP 53 = close -TCP 53 = close - -#BOOTP/DHCP - Bootstrap Protocol / -#Dynamic Host Configuration Protocol -UDP 67 = close -#UDP 68 = open -UDP 68 = whatever - -#www - World Wide Web -#HTTP - Hypertext Transfer Protocol -TCP 80 = close -#HTTPS - Hypertext Transfer Protocol Secure -TCP 443 = close - -#examples -TCP 8080 = close -TCP 5223 = whatever -UDP 4444 = close -UDP 631 = whatever diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/tnc/log4cxx.properties b/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/tnc/log4cxx.properties deleted file mode 100644 index 122d798b3..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/tnc/log4cxx.properties +++ /dev/null @@ -1,15 +0,0 @@ -# Set root logger level to DEBUG and its appenders to A1 and A2. -log4j.rootLogger=DEBUG, A1, A2 - -# A1 is set to be a ConsoleAppender. -log4j.appender.A1=org.apache.log4j.ConsoleAppender -log4j.appender.A1.layout=org.apache.log4j.PatternLayout -log4j.appender.A1.layout.ConversionPattern=--[IMV] %m%n - -# A2 is set to be a SyslogAppender -log4j.appender.A2=org.apache.log4j.net.SyslogAppender -log4j.appender.A2.Facility=DAEMON -log4j.appender.A2.SyslogHost=localhost -log4j.appender.A2.Threshold=DEBUG -log4j.appender.A2.layout=org.apache.log4j.PatternLayout -log4j.appender.A2.layout.ConversionPattern=--[IMV] %m%n diff --git a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/tnc_config b/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/tnc_config deleted file mode 100644 index 140caa98f..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/hosts/moon/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMV configuration file for strongSwan server - -IMV "Dummy" /usr/local/lib/libdummyimv.so -#IMV "HostScanner" /usr/local/lib/libhostscannerimv.so diff --git a/testing/tests/tnc/tnccs-11-fhh/posttest.dat b/testing/tests/tnc/tnccs-11-fhh/posttest.dat deleted file mode 100644 index 199873ba1..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/posttest.dat +++ /dev/null @@ -1,6 +0,0 @@ -carol::systemctl stop strongswan-swanctl -dave::systemctl stop strongswan-swanctl -moon::systemctl stop strongswan-swanctl -moon::iptables-restore < /etc/iptables.flush -carol::iptables-restore < /etc/iptables.flush -dave::iptables-restore < /etc/iptables.flush diff --git a/testing/tests/tnc/tnccs-11-fhh/pretest.dat b/testing/tests/tnc/tnccs-11-fhh/pretest.dat deleted file mode 100644 index 79340af29..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/pretest.dat +++ /dev/null @@ -1,20 +0,0 @@ -moon::iptables-restore < /etc/iptables.rules -carol::iptables-restore < /etc/iptables.rules -dave::iptables-restore < /etc/iptables.rules -moon::cat /etc/tnc_config -carol::cat /etc/tnc_config -dave::cat /etc/tnc_config -carol::cat /etc/tnc/dummyimc.file -dave::cat /etc/tnc/dummyimc.file -carol::rm /etc/swanctl/rsa/* -dave::rm /etc/swanctl/rsa/* -carol::rm /etc/swanctl/x509/* -dave::rm /etc/swanctl/x509/* -moon::systemctl start strongswan-swanctl -carol::systemctl start strongswan-swanctl -dave::systemctl start strongswan-swanctl -moon::expect-connection rw-allow -carol::expect-connection home -carol::swanctl --initiate --child home 2> /dev/null -dave::expect-connection home -dave::swanctl --initiate --child home 2> /dev/null diff --git a/testing/tests/tnc/tnccs-11-fhh/test.conf b/testing/tests/tnc/tnccs-11-fhh/test.conf deleted file mode 100644 index 61f2312af..000000000 --- a/testing/tests/tnc/tnccs-11-fhh/test.conf +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/bash -# -# This configuration file provides information on the -# guest instances used for this test - -# All guest instances that are required for this test -# -VIRTHOSTS="alice venus moon carol winnetou dave" - -# Corresponding block diagram -# -DIAGRAM="a-v-m-c-w-d.png" - -# Guest instances on which tcpdump is to be started -# -TCPDUMPHOSTS="moon" - -# Guest instances on which IPsec is started -# Used for IPsec logging purposes -# -IPSECHOSTS="moon carol dave" - -# Guest instances on which FreeRadius is started -# -RADIUSHOSTS= -# charon controlled by swanctl -# -SWANCTL=1 diff --git a/testing/tests/tnc/tnccs-11-radius-block/description.txt b/testing/tests/tnc/tnccs-11-radius-block/description.txt deleted file mode 100644 index 67b1a2a34..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/description.txt +++ /dev/null @@ -1,14 +0,0 @@ -The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>. -At the outset the gateway authenticates itself to the clients by sending an IKEv2 -<b>RSA signature</b> accompanied by a certificate. -<b>carol</b> and <b>dave</b> then set up an <b>EAP-TTLS</b> tunnel each via <b>moon</b> to the -<a href="http://trust.f4.hs-hannover.de/projects/tncatfhh.html" target="popup"> -<b>TNC@FHH</b></a>-enhanced FreeRADIUS server <b>alice</b> authenticated by an X.509 AAA certificate. -The strong EAP-TTLS tunnel protects the ensuing weak client authentication based on <b>EAP-MD5</b>. -In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the -health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface. -The IMC and IMV communicate are using the <b>IF-M</b> protocol defined by <b>RFC 5792 PA-TNC</b>. -<p> -<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements <b>carol</b> -is authenticated successfully and is granted access to the subnet behind <b>moon</b> whereas -<b>dave</b> fails the layered EAP authentication and is rejected. diff --git a/testing/tests/tnc/tnccs-11-radius-block/evaltest.dat b/testing/tests/tnc/tnccs-11-radius-block/evaltest.dat deleted file mode 100644 index b2fc61949..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/evaltest.dat +++ /dev/null @@ -1,15 +0,0 @@ -carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA.* successful::YES -carol::cat /var/log/daemon.log::TNCCS-Recommendation.*allow::YES -carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established::YES -dave:: cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA.* successful::YES -dave:: cat /var/log/daemon.log::TNCCS-Recommendation.*none::YES -dave:: cat /var/log/daemon.log::received EAP_FAILURE, EAP authentication failed::YES -moon:: cat /var/log/daemon.log::authentication of 'carol@strongswan.org' with EAP successful::YES -moon:: cat /var/log/daemon.log::RADIUS authentication of 'dave@strongswan.org' failed::YES -moon:: cat /var/log/daemon.log::EAP method EAP_TTLS failed for peer dave@strongswan.org::YES -carol::swanctl --list-sas --raw 2> /dev/null::home.*version=2 state=ESTABLISHED local-host=192.168.0.100 local-port=4500 local-id=carol@strongswan.org remote-host=192.168.0.1 remote-port=4500 remote-id=moon.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*home.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[192.168.0.100/32] remote-ts=\[10.1.0.0/16]::YES -dave:: swanctl --list-sas --raw 2> /dev/null::home::NO -moon:: swanctl --list-sas --ike-id 1 --raw 2> /dev/null::rw.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=4500 local-id=moon.strongswan.org remote-host=192.168.0.100 remote-port=4500 remote-id=carol@strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*rw.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[10.1.0.0/16] remote-ts=\[192.168.0.100/32]::YES -moon:: swanctl --list-sas --ike-id 2 --raw 2> /dev/null::rw::NO -carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_.eq=1::YES -dave:: ping -c 1 -W 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_.eq=1::NO diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/eap.conf b/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/eap.conf deleted file mode 100644 index 31556361e..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/eap.conf +++ /dev/null @@ -1,25 +0,0 @@ -eap { - md5 { - } - default_eap_type = ttls - tls { - private_key_file = /etc/raddb/certs/aaaKey.pem - certificate_file = /etc/raddb/certs/aaaCert.pem - CA_file = /etc/raddb/certs/strongswanCert.pem - cipher_list = "DEFAULT" - dh_file = /etc/raddb/certs/dh - random_file = /etc/raddb/certs/random - } - ttls { - default_eap_type = md5 - use_tunneled_reply = yes - virtual_server = "inner-tunnel" - tnc_virtual_server = "inner-tunnel-second" - } -} - -eap eap_tnc { - default_eap_type = tnc - tnc { - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/proxy.conf b/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/proxy.conf deleted file mode 100644 index 23cba8d11..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/proxy.conf +++ /dev/null @@ -1,5 +0,0 @@ -realm strongswan.org { - type = radius - authhost = LOCAL - accthost = LOCAL -} diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/sites-available/default b/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/sites-available/default deleted file mode 100644 index dd0825858..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/sites-available/default +++ /dev/null @@ -1,43 +0,0 @@ -authorize { - suffix - eap { - ok = return - } - files -} - -authenticate { - eap -} - -preacct { - preprocess - acct_unique - suffix - files -} - -accounting { - detail - unix - radutmp - attr_filter.accounting_response -} - -session { - radutmp -} - -post-auth { - exec - Post-Auth-Type REJECT { - attr_filter.access_reject - } -} - -pre-proxy { -} - -post-proxy { - eap -} diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/sites-available/inner-tunnel b/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/sites-available/inner-tunnel deleted file mode 100644 index e088fae14..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/sites-available/inner-tunnel +++ /dev/null @@ -1,32 +0,0 @@ -server inner-tunnel { - -authorize { - suffix - eap { - ok = return - } - files -} - -authenticate { - eap -} - -session { - radutmp -} - -post-auth { - Post-Auth-Type REJECT { - attr_filter.access_reject - } -} - -pre-proxy { -} - -post-proxy { - eap -} - -} # inner-tunnel server block diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second b/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second deleted file mode 100644 index c5bde6a9e..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second +++ /dev/null @@ -1,36 +0,0 @@ -server inner-tunnel-second { - -authorize { - eap_tnc { - ok = return - } -} - -authenticate { - eap_tnc -} - -session { - radutmp -} - -post-auth { - if (control:TNC-Status == "Access") { - update reply { - Tunnel-Type := ESP - Filter-Id := "allow" - } - } - elsif (control:TNC-Status == "Isolate") { - update reply { - Tunnel-Type := ESP - Filter-Id := "isolate" - } - } - - Post-Auth-Type REJECT { - attr_filter.access_reject - } -} - -} # inner-tunnel-second block diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/users b/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/users deleted file mode 100644 index 50ccf3e76..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/freeradius/users +++ /dev/null @@ -1,2 +0,0 @@ -carol Cleartext-Password := "Ar3etTnp" -dave Cleartext-Password := "W7R0g3do" diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/strongswan.conf deleted file mode 100644 index 7622801ab..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/strongswan.conf +++ /dev/null @@ -1,12 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -libimcv { - load = random nonce sha1 sha2 md5 gmp pubkey x509 - debug_level = 3 - assessment_result = no - plugins { - imv-test { - rounds = 1 - } - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/tnc/log4cxx.properties b/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/tnc/log4cxx.properties deleted file mode 100644 index 2bdc6e4de..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/tnc/log4cxx.properties +++ /dev/null @@ -1,15 +0,0 @@ -# Set root logger level to DEBUG and its appenders to A1 and A2. -log4j.rootLogger=DEBUG, A1, A2 - -# A1 is set to be a ConsoleAppender. -log4j.appender.A1=org.apache.log4j.ConsoleAppender -log4j.appender.A1.layout=org.apache.log4j.PatternLayout -log4j.appender.A1.layout.ConversionPattern=[FHH] %m%n - -# A2 is set to be a SyslogAppender -log4j.appender.A2=org.apache.log4j.net.SyslogAppender -log4j.appender.A2.Facility=DAEMON -log4j.appender.A2.SyslogHost=localhost -log4j.appender.A2.Threshold=DEBUG -log4j.appender.A2.layout=org.apache.log4j.PatternLayout -log4j.appender.A2.layout.ConversionPattern=[FHH] %m%n diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/tnc_config b/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/tnc_config deleted file mode 100644 index da732f68b..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/alice/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMV configuration file for strongSwan client - -IMV "Test" /usr/local/lib/ipsec/imcvs/imv-test.so -IMV "Scanner" /usr/local/lib/ipsec/imcvs/imv-scanner.so diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/carol/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-radius-block/hosts/carol/etc/strongswan.conf deleted file mode 100644 index 305a9d1e6..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/carol/etc/strongswan.conf +++ /dev/null @@ -1,27 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce aes sha1 sha2 md5 pem pkcs1 gmp hmac x509 revocation curl vici kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnc-tnccs tnccs-11 updown - - multiple_authentication=no - - syslog { - daemon { - tnc = 3 - imc = 3 - } - } - plugins { - eap-tnc { - protocol = tnccs-1.1 - } - } -} - -libimcv { - plugins { - imc-test { - command = allow - } - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/carol/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-radius-block/hosts/carol/etc/swanctl/swanctl.conf deleted file mode 100644 index ff58c7c9a..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/carol/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,35 +0,0 @@ -connections { - - home { - local_addrs = 192.168.0.100 - remote_addrs = 192.168.0.1 - - local { - auth = eap - aaa_id = aaa.strongswan.org - id = carol@strongswan.org - } - remote { - auth = pubkey - id = moon.strongswan.org - } - children { - home { - remote_ts = 10.1.0.0/16 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - proposals = aes128-sha256-modp3072 - } -} - -secrets { - - eap { - id = carol@strongswan.org - secret = "Ar3etTnp" - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/carol/etc/tnc_config b/testing/tests/tnc/tnccs-11-radius-block/hosts/carol/etc/tnc_config deleted file mode 100644 index 6166552f5..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/carol/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMC configuration file for strongSwan client - -IMC "Test" /usr/local/lib/ipsec/imcvs/imc-test.so -IMC "Scanner" /usr/local/lib/ipsec/imcvs/imc-scanner.so diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/dave/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-radius-block/hosts/dave/etc/strongswan.conf deleted file mode 100644 index 5d17eb638..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/dave/etc/strongswan.conf +++ /dev/null @@ -1,30 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce aes sha1 sha2 md5 gmp hmac pem pkcs1 x509 revocation curl vici kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnc-tnccs tnccs-11 updown - - multiple_authentication=no - - syslog { - daemon { - tnc = 3 - imc = 3 - } - } - plugins { - eap-tnc { - protocol = tnccs-1.1 - } - } -} - -libimcv { - plugins { - imc-test { - command = none - } - imc-scanner { - push_info = no - } - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/dave/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-radius-block/hosts/dave/etc/swanctl/swanctl.conf deleted file mode 100644 index 5af2098b6..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/dave/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,35 +0,0 @@ -connections { - - home { - local_addrs = 192.168.0.200 - remote_addrs = 192.168.0.1 - - local { - auth = eap - aaa_id = aaa.strongswan.org - id = dave@strongswan.org - } - remote { - auth = pubkey - id = moon.strongswan.org - } - children { - home { - remote_ts = 10.1.0.0/16 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - proposals = aes128-sha256-modp3072 - } -} - -secrets { - - eap { - id = dave@strongswan.org - secret = "W7R0g3do" - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/dave/etc/tnc_config b/testing/tests/tnc/tnccs-11-radius-block/hosts/dave/etc/tnc_config deleted file mode 100644 index 6166552f5..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/dave/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMC configuration file for strongSwan client - -IMC "Test" /usr/local/lib/ipsec/imcvs/imc-test.so -IMC "Scanner" /usr/local/lib/ipsec/imcvs/imc-scanner.so diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/moon/etc/iptables.rules b/testing/tests/tnc/tnccs-11-radius-block/hosts/moon/etc/iptables.rules deleted file mode 100644 index 1eb755354..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/moon/etc/iptables.rules +++ /dev/null @@ -1,32 +0,0 @@ -*filter - -# default policy is DROP --P INPUT DROP --P OUTPUT DROP --P FORWARD DROP - -# allow esp --A INPUT -i eth0 -p 50 -j ACCEPT --A OUTPUT -o eth0 -p 50 -j ACCEPT - -# allow IKE --A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT --A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT - -# allow MobIKE --A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT --A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT - -# allow ssh --A INPUT -p tcp --dport 22 -j ACCEPT --A OUTPUT -p tcp --sport 22 -j ACCEPT - -# allow crl fetch from winnetou --A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT --A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT - -# allow RADIUS protocol with alice --A INPUT -i eth1 -p udp --sport 1812 -s PH_IP_ALICE -j ACCEPT --A OUTPUT -o eth1 -p udp --dport 1812 -d PH_IP_ALICE -j ACCEPT - -COMMIT diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/moon/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-radius-block/hosts/moon/etc/strongswan.conf deleted file mode 100644 index 4c9dd6e1f..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/moon/etc/strongswan.conf +++ /dev/null @@ -1,15 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce aes sha1 sha2 md5 pem pkcs1 gmp hmac x509 revocation curl vici kernel-netlink socket-default eap-radius updown - - multiple_authentication=no - - plugins { - eap-radius { - secret = gv6URkSs - server = 10.1.0.10 - filter_id = yes - } - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-block/hosts/moon/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-radius-block/hosts/moon/etc/swanctl/swanctl.conf deleted file mode 100644 index 28b32b74c..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/hosts/moon/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,27 +0,0 @@ -connections { - - rw { - local_addrs = 192.168.0.1 - - local { - auth = pubkey - id = moon.strongswan.org - certs = moonCert.pem - } - remote { - auth = eap-radius - id = *@strongswan.org - } - children { - rw { - local_ts = 10.1.0.0/16 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-modp3072 - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-block/posttest.dat b/testing/tests/tnc/tnccs-11-radius-block/posttest.dat deleted file mode 100644 index 0d96563c1..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/posttest.dat +++ /dev/null @@ -1,8 +0,0 @@ -carol::systemctl stop strongswan-swanctl -dave::systemctl stop strongswan-swanctl -moon::systemctl stop strongswan-swanctl -alice::killall radiusd -alice::rm /etc/freeradius/sites-enabled/inner-tunnel-second -moon::iptables-restore < /etc/iptables.flush -carol::iptables-restore < /etc/iptables.flush -dave::iptables-restore < /etc/iptables.flush diff --git a/testing/tests/tnc/tnccs-11-radius-block/pretest.dat b/testing/tests/tnc/tnccs-11-radius-block/pretest.dat deleted file mode 100644 index efddc609e..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/pretest.dat +++ /dev/null @@ -1,21 +0,0 @@ -moon::iptables-restore < /etc/iptables.rules -carol::iptables-restore < /etc/iptables.rules -dave::iptables-restore < /etc/iptables.rules -alice::ln -s /etc/freeradius/sites-available/inner-tunnel-second /etc/freeradius/sites-enabled/inner-tunnel-second -alice::cat /etc/freeradius/sites-enabled/inner-tunnel-second -alice::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties radiusd -alice::cat /etc/tnc_config -carol::cat /etc/tnc_config -dave::cat /etc/tnc_config -carol::rm /etc/swanctl/rsa/* -dave::rm /etc/swanctl/rsa/* -carol::rm /etc/swanctl/x509/* -dave::rm /etc/swanctl/x509/* -moon::systemctl start strongswan-swanctl -carol::systemctl start strongswan-swanctl -dave::systemctl start strongswan-swanctl -moon::expect-connection rw -carol::expect-connection home -carol::swanctl --initiate --child home -dave::expect-connection home -dave::swanctl --initiate --child home diff --git a/testing/tests/tnc/tnccs-11-radius-block/test.conf b/testing/tests/tnc/tnccs-11-radius-block/test.conf deleted file mode 100644 index 8d7f51449..000000000 --- a/testing/tests/tnc/tnccs-11-radius-block/test.conf +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/bash -# -# This configuration file provides information on the -# guest instances used for this test - -# All guest instances that are required for this test -# -VIRTHOSTS="alice venus moon carol winnetou dave" - -# Corresponding block diagram -# -DIAGRAM="a-v-m-c-w-d.png" - -# Guest instances on which tcpdump is to be started -# -TCPDUMPHOSTS="moon" - -# Guest instances on which IPsec is started -# Used for IPsec logging purposes -# -IPSECHOSTS="moon carol dave" - -# Guest instances on which FreeRadius is started -# -RADIUSHOSTS="alice" - -# charon controlled by swanctl -# -SWANCTL=1 diff --git a/testing/tests/tnc/tnccs-11-radius-pts/description.txt b/testing/tests/tnc/tnccs-11-radius-pts/description.txt deleted file mode 100644 index d5729dd7b..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/description.txt +++ /dev/null @@ -1,14 +0,0 @@ -The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>. -At the outset the gateway authenticates itself to the clients by sending an IKEv2 -<b>RSA signature</b> accompanied by a certificate. -<b>carol</b> and <b>dave</b> then set up an <b>EAP-TTLS</b> tunnel each via <b>moon</b> to the -<a href="http://trust.f4.hs-hannover.de/projects/tncatfhh.html" target="popup"> -<b>TNC@FHH</b></a>-enhanced FreeRADIUS server <b>alice</b> authenticated by an X.509 AAA certificate. -The strong EAP-TTLS tunnel protects the ensuing weak client authentication based on <b>EAP-MD5</b>. -In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the -health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface. -The communication between the OS and Attestation IMC and the Attestation IMV is based on the - <b>IF-M</b> protocol defined by <b>RFC 5792 PA-TNC</b>. -<p> -<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements the clients -are connected by gateway <b>moon</b> to the "rw-allow" and "rw-isolate" subnets, respectively. diff --git a/testing/tests/tnc/tnccs-11-radius-pts/evaltest.dat b/testing/tests/tnc/tnccs-11-radius-pts/evaltest.dat deleted file mode 100644 index 588ddf469..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/evaltest.dat +++ /dev/null @@ -1,18 +0,0 @@ -carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA.* successful::YES -carol::cat /var/log/daemon.log::TNCCS-Recommendation.*allow::YES -carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established::YES -dave:: cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA.* successful::YES -dave:: cat /var/log/daemon.log::TNCCS-Recommendation.*isolate::YES -dave:: cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established::YES -moon:: cat /var/log/daemon.log::received RADIUS attribute Filter-Id: 'allow'::YES -moon:: cat /var/log/daemon.log::authentication of 'carol@strongswan.org' with EAP successful::YES -moon:: cat /var/log/daemon.log::received RADIUS attribute Filter-Id: 'isolate'::YES -moon:: cat /var/log/daemon.log::authentication of 'dave@strongswan.org' with EAP successful::YES -carol::swanctl --list-sas --raw 2> /dev/null::home.*version=2 state=ESTABLISHED local-host=192.168.0.100 local-port=4500 local-id=carol@strongswan.org remote-host=192.168.0.1 remote-port=4500 remote-id=moon.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=ECP_256.*child-sas.*home.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[192.168.0.100/32] remote-ts=\[10.1.0.0/28]::YES -dave:: swanctl --list-sas --raw 2> /dev/null::home.*version=2 state=ESTABLISHED local-host=192.168.0.200 local-port=4500 local-id=dave@strongswan.org remote-host=192.168.0.1 remote-port=4500 remote-id=moon.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=ECP_256.*child-sas.*home.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[192.168.0.200/32] remote-ts=\[10.1.0.16/28]::YES -moon:: swanctl --list-sas --ike-id 1 --raw 2> /dev/null::rw-allow.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=4500 local-id=moon.strongswan.org remote-host=192.168.0.100 remote-port=4500 remote-id=carol@strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=ECP_256.*child-sas.*rw-allow.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[10.1.0.0/28] remote-ts=\[192.168.0.100/32]::YES -moon:: swanctl --list-sas --ike-id 2 --raw 2> /dev/null::rw-isolate.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=4500 local-id=moon.strongswan.org remote-host=192.168.0.200 remote-port=4500 remote-id=dave@strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=ECP_256.*child-sas.*rw-isolate.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[10.1.0.16/28] remote-ts=\[192.168.0.200/32]::YES -carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_.eq=1::YES -carol::ping -c 1 -W 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_.eq=1::NO -dave:: ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_.eq=1::YES -dave:: ping -c 1 -W 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_.eq=1::NO diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/eap.conf b/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/eap.conf deleted file mode 100644 index 31556361e..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/eap.conf +++ /dev/null @@ -1,25 +0,0 @@ -eap { - md5 { - } - default_eap_type = ttls - tls { - private_key_file = /etc/raddb/certs/aaaKey.pem - certificate_file = /etc/raddb/certs/aaaCert.pem - CA_file = /etc/raddb/certs/strongswanCert.pem - cipher_list = "DEFAULT" - dh_file = /etc/raddb/certs/dh - random_file = /etc/raddb/certs/random - } - ttls { - default_eap_type = md5 - use_tunneled_reply = yes - virtual_server = "inner-tunnel" - tnc_virtual_server = "inner-tunnel-second" - } -} - -eap eap_tnc { - default_eap_type = tnc - tnc { - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/proxy.conf b/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/proxy.conf deleted file mode 100644 index 23cba8d11..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/proxy.conf +++ /dev/null @@ -1,5 +0,0 @@ -realm strongswan.org { - type = radius - authhost = LOCAL - accthost = LOCAL -} diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/sites-available/default b/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/sites-available/default deleted file mode 100644 index dd0825858..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/sites-available/default +++ /dev/null @@ -1,43 +0,0 @@ -authorize { - suffix - eap { - ok = return - } - files -} - -authenticate { - eap -} - -preacct { - preprocess - acct_unique - suffix - files -} - -accounting { - detail - unix - radutmp - attr_filter.accounting_response -} - -session { - radutmp -} - -post-auth { - exec - Post-Auth-Type REJECT { - attr_filter.access_reject - } -} - -pre-proxy { -} - -post-proxy { - eap -} diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/sites-available/inner-tunnel b/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/sites-available/inner-tunnel deleted file mode 100644 index e088fae14..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/sites-available/inner-tunnel +++ /dev/null @@ -1,32 +0,0 @@ -server inner-tunnel { - -authorize { - suffix - eap { - ok = return - } - files -} - -authenticate { - eap -} - -session { - radutmp -} - -post-auth { - Post-Auth-Type REJECT { - attr_filter.access_reject - } -} - -pre-proxy { -} - -post-proxy { - eap -} - -} # inner-tunnel server block diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second b/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second deleted file mode 100644 index c5bde6a9e..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second +++ /dev/null @@ -1,36 +0,0 @@ -server inner-tunnel-second { - -authorize { - eap_tnc { - ok = return - } -} - -authenticate { - eap_tnc -} - -session { - radutmp -} - -post-auth { - if (control:TNC-Status == "Access") { - update reply { - Tunnel-Type := ESP - Filter-Id := "allow" - } - } - elsif (control:TNC-Status == "Isolate") { - update reply { - Tunnel-Type := ESP - Filter-Id := "isolate" - } - } - - Post-Auth-Type REJECT { - attr_filter.access_reject - } -} - -} # inner-tunnel-second block diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/users b/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/users deleted file mode 100644 index 50ccf3e76..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/freeradius/users +++ /dev/null @@ -1,2 +0,0 @@ -carol Cleartext-Password := "Ar3etTnp" -dave Cleartext-Password := "W7R0g3do" diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/pts/data1.sql b/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/pts/data1.sql deleted file mode 100644 index d87b5e7f9..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/pts/data1.sql +++ /dev/null @@ -1,29 +0,0 @@ -/* Devices */ - -INSERT INTO devices ( /* 1 */ - value, product, created -) -SELECT 'aabbccddeeff11223344556677889900', id, 1372330615 -FROM products WHERE name = 'Debian DEBIAN_VERSION x86_64'; - -/* Groups Members */ - -INSERT INTO groups_members ( - group_id, device_id -) VALUES ( - 10, 1 -); - -INSERT INTO enforcements ( - policy, group_id, max_age, rec_fail, rec_noresult -) VALUES ( - 3, 10, 0, 2, 2 -); - -INSERT INTO enforcements ( - policy, group_id, max_age -) VALUES ( - 16, 2, 0 -); - -DELETE FROM enforcements WHERE id = 1; diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/strongswan.conf deleted file mode 100644 index a3f4ca12c..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/strongswan.conf +++ /dev/null @@ -1,13 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -libimcv { - load = random nonce openssl pubkey sqlite - debug_level = 3 - database = sqlite:///etc/db.d/config.db - policy_script = /usr/local/libexec/ipsec/imv_policy_manager - assessment_result = no -} - -attest { - database = sqlite:///etc/db.d/config.db -} diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/tnc/log4cxx.properties b/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/tnc/log4cxx.properties deleted file mode 100644 index 2bdc6e4de..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/tnc/log4cxx.properties +++ /dev/null @@ -1,15 +0,0 @@ -# Set root logger level to DEBUG and its appenders to A1 and A2. -log4j.rootLogger=DEBUG, A1, A2 - -# A1 is set to be a ConsoleAppender. -log4j.appender.A1=org.apache.log4j.ConsoleAppender -log4j.appender.A1.layout=org.apache.log4j.PatternLayout -log4j.appender.A1.layout.ConversionPattern=[FHH] %m%n - -# A2 is set to be a SyslogAppender -log4j.appender.A2=org.apache.log4j.net.SyslogAppender -log4j.appender.A2.Facility=DAEMON -log4j.appender.A2.SyslogHost=localhost -log4j.appender.A2.Threshold=DEBUG -log4j.appender.A2.layout=org.apache.log4j.PatternLayout -log4j.appender.A2.layout.ConversionPattern=[FHH] %m%n diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/tnc_config b/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/tnc_config deleted file mode 100644 index b5ac8c178..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/alice/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMV configuration file for strongSwan client - -IMV "OS" /usr/local/lib/ipsec/imcvs/imv-os.so -IMV "Attestation" /usr/local/lib/ipsec/imcvs/imv-attestation.so diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/carol/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-radius-pts/hosts/carol/etc/strongswan.conf deleted file mode 100644 index a534ac66e..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/carol/etc/strongswan.conf +++ /dev/null @@ -1,19 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce openssl pem pkcs1 revocation curl vici kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnc-tnccs tnccs-11 updown - - multiple_authentication=no - - syslog { - daemon { - tnc = 3 - imc = 3 - } - } - plugins { - eap-tnc { - protocol = tnccs-1.1 - } - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/carol/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-radius-pts/hosts/carol/etc/swanctl/swanctl.conf deleted file mode 100644 index 1516ad726..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/carol/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,35 +0,0 @@ -connections { - - home { - local_addrs = 192.168.0.100 - remote_addrs = 192.168.0.1 - - local { - auth = eap - aaa_id = aaa.strongswan.org - id = carol@strongswan.org - } - remote { - auth = pubkey - id = moon.strongswan.org - } - children { - home { - remote_ts = 10.1.0.0/16 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-ecp256 - } - } - version = 2 - proposals = aes128-sha256-ecp256 - } -} - -secrets { - - eap { - id = carol@strongswan.org - secret = "Ar3etTnp" - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/carol/etc/tnc_config b/testing/tests/tnc/tnccs-11-radius-pts/hosts/carol/etc/tnc_config deleted file mode 100644 index 15dc93a0a..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/carol/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMC configuration file for strongSwan client - -IMC "OS" /usr/local/lib/ipsec/imcvs/imc-os.so -IMC "Attestation" /usr/local/lib/ipsec/imcvs/imc-attestation.so diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/dave/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-radius-pts/hosts/dave/etc/strongswan.conf deleted file mode 100644 index 469e81156..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/dave/etc/strongswan.conf +++ /dev/null @@ -1,20 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce openssl pem pkcs1 revocation curl vici kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnc-tnccs tnccs-11 updown - - multiple_authentication=no - retransmit_tries = 5 - - syslog { - daemon { - tnc = 3 - imc = 3 - } - } - plugins { - eap-tnc { - protocol = tnccs-1.1 - } - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/dave/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-radius-pts/hosts/dave/etc/swanctl/swanctl.conf deleted file mode 100644 index 07b35dcb9..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/dave/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,35 +0,0 @@ -connections { - - home { - local_addrs = 192.168.0.200 - remote_addrs = 192.168.0.1 - - local { - auth = eap - aaa_id = aaa.strongswan.org - id = dave@strongswan.org - } - remote { - auth = pubkey - id = moon.strongswan.org - } - children { - home { - remote_ts = 10.1.0.0/16 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-ecp256 - } - } - version = 2 - proposals = aes128-sha256-ecp256 - } -} - -secrets { - - eap { - id = dave@strongswan.org - secret = "W7R0g3do" - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/dave/etc/tnc_config b/testing/tests/tnc/tnccs-11-radius-pts/hosts/dave/etc/tnc_config deleted file mode 100644 index 15dc93a0a..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/dave/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMC configuration file for strongSwan client - -IMC "OS" /usr/local/lib/ipsec/imcvs/imc-os.so -IMC "Attestation" /usr/local/lib/ipsec/imcvs/imc-attestation.so diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/moon/etc/iptables.rules b/testing/tests/tnc/tnccs-11-radius-pts/hosts/moon/etc/iptables.rules deleted file mode 100644 index 1eb755354..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/moon/etc/iptables.rules +++ /dev/null @@ -1,32 +0,0 @@ -*filter - -# default policy is DROP --P INPUT DROP --P OUTPUT DROP --P FORWARD DROP - -# allow esp --A INPUT -i eth0 -p 50 -j ACCEPT --A OUTPUT -o eth0 -p 50 -j ACCEPT - -# allow IKE --A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT --A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT - -# allow MobIKE --A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT --A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT - -# allow ssh --A INPUT -p tcp --dport 22 -j ACCEPT --A OUTPUT -p tcp --sport 22 -j ACCEPT - -# allow crl fetch from winnetou --A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT --A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT - -# allow RADIUS protocol with alice --A INPUT -i eth1 -p udp --sport 1812 -s PH_IP_ALICE -j ACCEPT --A OUTPUT -o eth1 -p udp --dport 1812 -d PH_IP_ALICE -j ACCEPT - -COMMIT diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/moon/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-radius-pts/hosts/moon/etc/strongswan.conf deleted file mode 100644 index cbaf67c89..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/moon/etc/strongswan.conf +++ /dev/null @@ -1,15 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce openssl pem pkcs1 x509 revocation curl vici kernel-netlink socket-default eap-radius updown - - multiple_authentication=no - - plugins { - eap-radius { - secret = gv6URkSs - server = 10.1.0.10 - filter_id = yes - } - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-pts/hosts/moon/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-radius-pts/hosts/moon/etc/swanctl/swanctl.conf deleted file mode 100644 index 096eb7b5a..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/hosts/moon/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,53 +0,0 @@ -connections { - - rw-allow { - local_addrs = 192.168.0.1 - - local { - auth = pubkey - id = moon.strongswan.org - certs = moonCert.pem - } - remote { - auth = eap-radius - id = *@strongswan.org - groups = allow - } - children { - rw-allow { - local_ts = 10.1.0.0/28 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-ecp256 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-ecp256 - } - - rw-isolate { - local_addrs = 192.168.0.1 - - local { - auth = pubkey - id = moon.strongswan.org - } - remote { - auth = eap-radius - id = *@strongswan.org - groups = isolate - } - children { - rw-isolate { - local_ts = 10.1.0.16/28 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-ecp256 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-ecp256 - } -} diff --git a/testing/tests/tnc/tnccs-11-radius-pts/posttest.dat b/testing/tests/tnc/tnccs-11-radius-pts/posttest.dat deleted file mode 100644 index ab96df0ed..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/posttest.dat +++ /dev/null @@ -1,9 +0,0 @@ -carol::systemctl stop strongswan-swanctl -dave::systemctl stop strongswan-swanctl -moon::systemctl stop strongswan-swanctl -alice::killall radiusd -alice::rm /etc/freeradius/sites-enabled/inner-tunnel-second -carol::echo 1 > /proc/sys/net/ipv4/ip_forward -moon::iptables-restore < /etc/iptables.flush -carol::iptables-restore < /etc/iptables.flush -dave::iptables-restore < /etc/iptables.flush diff --git a/testing/tests/tnc/tnccs-11-radius-pts/pretest.dat b/testing/tests/tnc/tnccs-11-radius-pts/pretest.dat deleted file mode 100644 index 7d0dfa385..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/pretest.dat +++ /dev/null @@ -1,28 +0,0 @@ -moon::iptables-restore < /etc/iptables.rules -carol::iptables-restore < /etc/iptables.rules -dave::iptables-restore < /etc/iptables.rules -carol::echo 0 > /proc/sys/net/ipv4/ip_forward -dave::echo aabbccddeeff11223344556677889900 > /var/lib/dbus/machine-id -alice::ln -s /etc/freeradius/sites-available/inner-tunnel-second /etc/freeradius/sites-enabled/inner-tunnel-second -alice::cat /etc/freeradius/sites-enabled/inner-tunnel-second -alice::sed -i "s:DEBIAN_VERSION:\`cat /etc/debian_version\`:" /etc/pts/data1.sql -alice::cd /usr/local/share/strongswan/templates/database/imv; cat tables.sql data.sql /etc/pts/data1.sql | sqlite3 /etc/db.d/config.db -alice::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties radiusd -alice::cat /etc/tnc_config -carol::cat /etc/tnc_config -dave::cat /etc/tnc_config -carol::rm /etc/swanctl/rsa/* -dave::rm /etc/swanctl/rsa/* -carol::rm /etc/swanctl/x509/* -dave::rm /etc/swanctl/x509/* -moon::systemctl start strongswan-swanctl -carol::systemctl start strongswan-swanctl -dave::systemctl start strongswan-swanctl -moon::expect-connection rw-allow -moon::expect-connection rw-isolate -carol::expect-connection home -carol::swanctl --initiate --child home -dave::expect-connection home -dave::swanctl --initiate --child home -alice::ipsec attest --sessions -alice::ipsec attest --devices diff --git a/testing/tests/tnc/tnccs-11-radius-pts/test.conf b/testing/tests/tnc/tnccs-11-radius-pts/test.conf deleted file mode 100644 index 05d40f98d..000000000 --- a/testing/tests/tnc/tnccs-11-radius-pts/test.conf +++ /dev/null @@ -1,33 +0,0 @@ -#!/bin/bash -# -# This configuration file provides information on the -# guest instances used for this test - -# All guest instances that are required for this test -# -VIRTHOSTS="alice venus moon carol winnetou dave" - -# Corresponding block diagram -# -DIAGRAM="a-v-m-c-w-d.png" - -# Guest instances on which tcpdump is to be started -# -TCPDUMPHOSTS="moon" - -# Guest instances on which IPsec is started -# Used for IPsec logging purposes -# -IPSECHOSTS="moon carol dave" - -# Guest instances on which FreeRadius is started -# -RADIUSHOSTS="alice" - -# Guest instances on which databases are used -# -DBHOSTS="alice" - -# charon controlled by swanctl -# -SWANCTL=1 diff --git a/testing/tests/tnc/tnccs-11-radius/description.txt b/testing/tests/tnc/tnccs-11-radius/description.txt deleted file mode 100644 index 4017c6eda..000000000 --- a/testing/tests/tnc/tnccs-11-radius/description.txt +++ /dev/null @@ -1,13 +0,0 @@ -The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>. -At the outset the gateway authenticates itself to the clients by sending an IKEv2 -<b>RSA signature</b> accompanied by a certificate. -<b>carol</b> and <b>dave</b> then set up an <b>EAP-TTLS</b> tunnel each via <b>moon</b> to the -<a href="http://trust.f4.hs-hannover.de/projects/tncatfhh.html" target="popup"> -<b>TNC@FHH</b></a>-enhanced FreeRADIUS server <b>alice</b> authenticated by an X.509 AAA certificate. -The strong EAP-TTLS tunnel protects the ensuing weak client authentication based on <b>EAP-MD5</b>. -In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the -health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface. -The communication between IMCs and IMVs is based on the <b>IF-M</b> protocol defined by <b>RFC 5792 PA-TNC</b>. -<p> -<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements the clients -are connected by gateway <b>moon</b> to the "rw-allow" and "rw-isolate" subnets, respectively. diff --git a/testing/tests/tnc/tnccs-11-radius/evaltest.dat b/testing/tests/tnc/tnccs-11-radius/evaltest.dat deleted file mode 100644 index cbafc1303..000000000 --- a/testing/tests/tnc/tnccs-11-radius/evaltest.dat +++ /dev/null @@ -1,18 +0,0 @@ -carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA.* successful::YES -carol::cat /var/log/daemon.log::TNCCS-Recommendation.*allow::YES -carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established::YES -dave:: cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA.* successful::YES -dave:: cat /var/log/daemon.log::TNCCS-Recommendation.*isolate::YES -dave:: cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established::YES -moon:: cat /var/log/daemon.log::received RADIUS attribute Filter-Id: 'allow'::YES -moon:: cat /var/log/daemon.log::authentication of 'carol@strongswan.org' with EAP successful::YES -moon:: cat /var/log/daemon.log::received RADIUS attribute Filter-Id: 'isolate'::YES -moon:: cat /var/log/daemon.log::authentication of 'dave@strongswan.org' with EAP successful::YES -carol::swanctl --list-sas --raw 2> /dev/null::home.*version=2 state=ESTABLISHED local-host=192.168.0.100 local-port=4500 local-id=carol@strongswan.org remote-host=192.168.0.1 remote-port=4500 remote-id=moon.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*home.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[192.168.0.100/32] remote-ts=\[10.1.0.0/28]::YES -dave:: swanctl --list-sas --raw 2> /dev/null::home.*version=2 state=ESTABLISHED local-host=192.168.0.200 local-port=4500 local-id=dave@strongswan.org remote-host=192.168.0.1 remote-port=4500 remote-id=moon.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*home.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[192.168.0.200/32] remote-ts=\[10.1.0.16/28]::YES -moon:: swanctl --list-sas --ike-id 1 --raw 2> /dev/null::rw-allow.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=4500 local-id=moon.strongswan.org remote-host=192.168.0.100 remote-port=4500 remote-id=carol@strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*rw-allow.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[10.1.0.0/28] remote-ts=\[192.168.0.100/32]::YES -moon:: swanctl --list-sas --ike-id 2 --raw 2> /dev/null::rw-isolate.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=4500 local-id=moon.strongswan.org remote-host=192.168.0.200 remote-port=4500 remote-id=dave@strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*rw-isolate.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[10.1.0.16/28] remote-ts=\[192.168.0.200/32]::YES -carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_.eq=1::YES -carol::ping -c 1 -W 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_.eq=1::NO -dave:: ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_.eq=1::YES -dave:: ping -c 1 -W 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_.eq=1::NO diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/eap.conf b/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/eap.conf deleted file mode 100644 index 31556361e..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/eap.conf +++ /dev/null @@ -1,25 +0,0 @@ -eap { - md5 { - } - default_eap_type = ttls - tls { - private_key_file = /etc/raddb/certs/aaaKey.pem - certificate_file = /etc/raddb/certs/aaaCert.pem - CA_file = /etc/raddb/certs/strongswanCert.pem - cipher_list = "DEFAULT" - dh_file = /etc/raddb/certs/dh - random_file = /etc/raddb/certs/random - } - ttls { - default_eap_type = md5 - use_tunneled_reply = yes - virtual_server = "inner-tunnel" - tnc_virtual_server = "inner-tunnel-second" - } -} - -eap eap_tnc { - default_eap_type = tnc - tnc { - } -} diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/proxy.conf b/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/proxy.conf deleted file mode 100644 index 23cba8d11..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/proxy.conf +++ /dev/null @@ -1,5 +0,0 @@ -realm strongswan.org { - type = radius - authhost = LOCAL - accthost = LOCAL -} diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/sites-available/default b/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/sites-available/default deleted file mode 100644 index dd0825858..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/sites-available/default +++ /dev/null @@ -1,43 +0,0 @@ -authorize { - suffix - eap { - ok = return - } - files -} - -authenticate { - eap -} - -preacct { - preprocess - acct_unique - suffix - files -} - -accounting { - detail - unix - radutmp - attr_filter.accounting_response -} - -session { - radutmp -} - -post-auth { - exec - Post-Auth-Type REJECT { - attr_filter.access_reject - } -} - -pre-proxy { -} - -post-proxy { - eap -} diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/sites-available/inner-tunnel b/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/sites-available/inner-tunnel deleted file mode 100644 index e088fae14..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/sites-available/inner-tunnel +++ /dev/null @@ -1,32 +0,0 @@ -server inner-tunnel { - -authorize { - suffix - eap { - ok = return - } - files -} - -authenticate { - eap -} - -session { - radutmp -} - -post-auth { - Post-Auth-Type REJECT { - attr_filter.access_reject - } -} - -pre-proxy { -} - -post-proxy { - eap -} - -} # inner-tunnel server block diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second b/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second deleted file mode 100644 index c5bde6a9e..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second +++ /dev/null @@ -1,36 +0,0 @@ -server inner-tunnel-second { - -authorize { - eap_tnc { - ok = return - } -} - -authenticate { - eap_tnc -} - -session { - radutmp -} - -post-auth { - if (control:TNC-Status == "Access") { - update reply { - Tunnel-Type := ESP - Filter-Id := "allow" - } - } - elsif (control:TNC-Status == "Isolate") { - update reply { - Tunnel-Type := ESP - Filter-Id := "isolate" - } - } - - Post-Auth-Type REJECT { - attr_filter.access_reject - } -} - -} # inner-tunnel-second block diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/users b/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/users deleted file mode 100644 index 50ccf3e76..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/freeradius/users +++ /dev/null @@ -1,2 +0,0 @@ -carol Cleartext-Password := "Ar3etTnp" -dave Cleartext-Password := "W7R0g3do" diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/strongswan.conf deleted file mode 100644 index 7622801ab..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/strongswan.conf +++ /dev/null @@ -1,12 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -libimcv { - load = random nonce sha1 sha2 md5 gmp pubkey x509 - debug_level = 3 - assessment_result = no - plugins { - imv-test { - rounds = 1 - } - } -} diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/tnc/log4cxx.properties b/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/tnc/log4cxx.properties deleted file mode 100644 index 2bdc6e4de..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/tnc/log4cxx.properties +++ /dev/null @@ -1,15 +0,0 @@ -# Set root logger level to DEBUG and its appenders to A1 and A2. -log4j.rootLogger=DEBUG, A1, A2 - -# A1 is set to be a ConsoleAppender. -log4j.appender.A1=org.apache.log4j.ConsoleAppender -log4j.appender.A1.layout=org.apache.log4j.PatternLayout -log4j.appender.A1.layout.ConversionPattern=[FHH] %m%n - -# A2 is set to be a SyslogAppender -log4j.appender.A2=org.apache.log4j.net.SyslogAppender -log4j.appender.A2.Facility=DAEMON -log4j.appender.A2.SyslogHost=localhost -log4j.appender.A2.Threshold=DEBUG -log4j.appender.A2.layout=org.apache.log4j.PatternLayout -log4j.appender.A2.layout.ConversionPattern=[FHH] %m%n diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/tnc_config b/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/tnc_config deleted file mode 100644 index da732f68b..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/alice/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMV configuration file for strongSwan client - -IMV "Test" /usr/local/lib/ipsec/imcvs/imv-test.so -IMV "Scanner" /usr/local/lib/ipsec/imcvs/imv-scanner.so diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/carol/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-radius/hosts/carol/etc/strongswan.conf deleted file mode 100644 index 1ca6c3d10..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/carol/etc/strongswan.conf +++ /dev/null @@ -1,30 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce aes sha1 sha2 md5 pem pkcs1 gmp hmac x509 revocation curl vici kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnc-tnccs tnccs-11 updown - - multiple_authentication=no - - syslog { - daemon { - tnc = 3 - imc = 3 - } - } - plugins { - eap-tnc { - protocol = tnccs-1.1 - } - } -} - -libimcv { - plugins { - imc-test { - command = allow - } - } -} -libtls { - suites = TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 -} diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/carol/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-radius/hosts/carol/etc/swanctl/swanctl.conf deleted file mode 100644 index ff58c7c9a..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/carol/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,35 +0,0 @@ -connections { - - home { - local_addrs = 192.168.0.100 - remote_addrs = 192.168.0.1 - - local { - auth = eap - aaa_id = aaa.strongswan.org - id = carol@strongswan.org - } - remote { - auth = pubkey - id = moon.strongswan.org - } - children { - home { - remote_ts = 10.1.0.0/16 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - proposals = aes128-sha256-modp3072 - } -} - -secrets { - - eap { - id = carol@strongswan.org - secret = "Ar3etTnp" - } -} diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/carol/etc/tnc_config b/testing/tests/tnc/tnccs-11-radius/hosts/carol/etc/tnc_config deleted file mode 100644 index 6166552f5..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/carol/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMC configuration file for strongSwan client - -IMC "Test" /usr/local/lib/ipsec/imcvs/imc-test.so -IMC "Scanner" /usr/local/lib/ipsec/imcvs/imc-scanner.so diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/dave/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-radius/hosts/dave/etc/strongswan.conf deleted file mode 100644 index 9df983c80..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/dave/etc/strongswan.conf +++ /dev/null @@ -1,30 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce aes sha1 sha2 md5 gmp hmac pem pkcs1 x509 revocation curl vici kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnc-tnccs tnccs-11 updown - - multiple_authentication=no - - syslog { - daemon { - tnc = 3 - imc = 3 - } - } - plugins { - eap-tnc { - protocol = tnccs-1.1 - } - } -} - -libimcv { - plugins { - imc-test { - command = isolate - } - imc-scanner { - push_info = no - } - } -} diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/dave/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-radius/hosts/dave/etc/swanctl/swanctl.conf deleted file mode 100644 index 5af2098b6..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/dave/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,35 +0,0 @@ -connections { - - home { - local_addrs = 192.168.0.200 - remote_addrs = 192.168.0.1 - - local { - auth = eap - aaa_id = aaa.strongswan.org - id = dave@strongswan.org - } - remote { - auth = pubkey - id = moon.strongswan.org - } - children { - home { - remote_ts = 10.1.0.0/16 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - proposals = aes128-sha256-modp3072 - } -} - -secrets { - - eap { - id = dave@strongswan.org - secret = "W7R0g3do" - } -} diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/dave/etc/tnc_config b/testing/tests/tnc/tnccs-11-radius/hosts/dave/etc/tnc_config deleted file mode 100644 index 6166552f5..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/dave/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMC configuration file for strongSwan client - -IMC "Test" /usr/local/lib/ipsec/imcvs/imc-test.so -IMC "Scanner" /usr/local/lib/ipsec/imcvs/imc-scanner.so diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/moon/etc/iptables.rules b/testing/tests/tnc/tnccs-11-radius/hosts/moon/etc/iptables.rules deleted file mode 100644 index 1eb755354..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/moon/etc/iptables.rules +++ /dev/null @@ -1,32 +0,0 @@ -*filter - -# default policy is DROP --P INPUT DROP --P OUTPUT DROP --P FORWARD DROP - -# allow esp --A INPUT -i eth0 -p 50 -j ACCEPT --A OUTPUT -o eth0 -p 50 -j ACCEPT - -# allow IKE --A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT --A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT - -# allow MobIKE --A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT --A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT - -# allow ssh --A INPUT -p tcp --dport 22 -j ACCEPT --A OUTPUT -p tcp --sport 22 -j ACCEPT - -# allow crl fetch from winnetou --A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT --A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT - -# allow RADIUS protocol with alice --A INPUT -i eth1 -p udp --sport 1812 -s PH_IP_ALICE -j ACCEPT --A OUTPUT -o eth1 -p udp --dport 1812 -d PH_IP_ALICE -j ACCEPT - -COMMIT diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/moon/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-radius/hosts/moon/etc/strongswan.conf deleted file mode 100644 index 4c9dd6e1f..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/moon/etc/strongswan.conf +++ /dev/null @@ -1,15 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce aes sha1 sha2 md5 pem pkcs1 gmp hmac x509 revocation curl vici kernel-netlink socket-default eap-radius updown - - multiple_authentication=no - - plugins { - eap-radius { - secret = gv6URkSs - server = 10.1.0.10 - filter_id = yes - } - } -} diff --git a/testing/tests/tnc/tnccs-11-radius/hosts/moon/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-radius/hosts/moon/etc/swanctl/swanctl.conf deleted file mode 100644 index 3caad0c66..000000000 --- a/testing/tests/tnc/tnccs-11-radius/hosts/moon/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,53 +0,0 @@ -connections { - - rw-allow { - local_addrs = 192.168.0.1 - - local { - auth = pubkey - id = moon.strongswan.org - certs = moonCert.pem - } - remote { - auth = eap-radius - id = *@strongswan.org - groups = allow - } - children { - rw-allow { - local_ts = 10.1.0.0/28 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-modp3072 - } - - rw-isolate { - local_addrs = 192.168.0.1 - - local { - auth = pubkey - id = moon.strongswan.org - } - remote { - auth = eap-radius - id = *@strongswan.org - groups = isolate - } - children { - rw-isolate { - local_ts = 10.1.0.16/28 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-modp3072 - } -} diff --git a/testing/tests/tnc/tnccs-11-radius/posttest.dat b/testing/tests/tnc/tnccs-11-radius/posttest.dat deleted file mode 100644 index 0d96563c1..000000000 --- a/testing/tests/tnc/tnccs-11-radius/posttest.dat +++ /dev/null @@ -1,8 +0,0 @@ -carol::systemctl stop strongswan-swanctl -dave::systemctl stop strongswan-swanctl -moon::systemctl stop strongswan-swanctl -alice::killall radiusd -alice::rm /etc/freeradius/sites-enabled/inner-tunnel-second -moon::iptables-restore < /etc/iptables.flush -carol::iptables-restore < /etc/iptables.flush -dave::iptables-restore < /etc/iptables.flush diff --git a/testing/tests/tnc/tnccs-11-radius/pretest.dat b/testing/tests/tnc/tnccs-11-radius/pretest.dat deleted file mode 100644 index bb2ce93b3..000000000 --- a/testing/tests/tnc/tnccs-11-radius/pretest.dat +++ /dev/null @@ -1,22 +0,0 @@ -moon::iptables-restore < /etc/iptables.rules -carol::iptables-restore < /etc/iptables.rules -dave::iptables-restore < /etc/iptables.rules -alice::ln -s /etc/freeradius/sites-available/inner-tunnel-second /etc/freeradius/sites-enabled/inner-tunnel-second -alice::cat /etc/freeradius/sites-enabled/inner-tunnel-second -alice::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties radiusd -alice::cat /etc/tnc_config -carol::cat /etc/tnc_config -dave::cat /etc/tnc_config -carol::rm /etc/swanctl/rsa/* -dave::rm /etc/swanctl/rsa/* -carol::rm /etc/swanctl/x509/* -dave::rm /etc/swanctl/x509/* -moon::systemctl start strongswan-swanctl -carol::systemctl start strongswan-swanctl -dave::systemctl start strongswan-swanctl -moon::expect-connection rw-allow -moon::expect-connection rw-isolate -carol::expect-connection home -carol::swanctl --initiate --child home -dave::expect-connection home -dave::swanctl --initiate --child home diff --git a/testing/tests/tnc/tnccs-11-radius/test.conf b/testing/tests/tnc/tnccs-11-radius/test.conf deleted file mode 100644 index 8d7f51449..000000000 --- a/testing/tests/tnc/tnccs-11-radius/test.conf +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/bash -# -# This configuration file provides information on the -# guest instances used for this test - -# All guest instances that are required for this test -# -VIRTHOSTS="alice venus moon carol winnetou dave" - -# Corresponding block diagram -# -DIAGRAM="a-v-m-c-w-d.png" - -# Guest instances on which tcpdump is to be started -# -TCPDUMPHOSTS="moon" - -# Guest instances on which IPsec is started -# Used for IPsec logging purposes -# -IPSECHOSTS="moon carol dave" - -# Guest instances on which FreeRadius is started -# -RADIUSHOSTS="alice" - -# charon controlled by swanctl -# -SWANCTL=1 diff --git a/testing/tests/tnc/tnccs-11-supplicant/description.txt b/testing/tests/tnc/tnccs-11-supplicant/description.txt deleted file mode 100644 index 5d0155382..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/description.txt +++ /dev/null @@ -1,12 +0,0 @@ -The layer 2 supplicants <b>carol</b> and <b>dave</b> want to connect to a network -via switch <b>moon</b> which delegates the IEEE 802.1X authentication to the RADIUS -server <b>alice</b>. <b>carol</b> and <b>dave</b> set up an <b>EAP-TTLS</b> tunnel -each via <b>moon</b> to the <a href="http://trust.f4.hs-hannover.de/projects/tncatfhh.html" target="popup"> <b>TNC@FHH</b></a>-enhanced FreeRADIUS server <b>alice</b> authenticated -by an X.509 AAA certificate. -The strong EAP-TTLS tunnel protects the ensuing weak client authentication based on <b>EAP-MD5</b>. -In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the -health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface. -The communication between IMCs and IMVs is based on the <b>IF-M</b> protocol defined by <b>RFC 5792 PA-TNC</b>. -<p> -<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements the clients -are connected by switch <b>moon</b> to the "allow" and "isolate" VLANs, respectively. diff --git a/testing/tests/tnc/tnccs-11-supplicant/evaltest.dat b/testing/tests/tnc/tnccs-11-supplicant/evaltest.dat deleted file mode 100644 index 2d43b3c7b..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/evaltest.dat +++ /dev/null @@ -1,2 +0,0 @@ -carol::cat /var/log/daemon.log::IMC.*changed state.*Allowed::YES -dave:: cat /var/log/daemon.log::IMC.*changed state.*Isolate::YES diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/eap.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/eap.conf deleted file mode 100644 index 31556361e..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/eap.conf +++ /dev/null @@ -1,25 +0,0 @@ -eap { - md5 { - } - default_eap_type = ttls - tls { - private_key_file = /etc/raddb/certs/aaaKey.pem - certificate_file = /etc/raddb/certs/aaaCert.pem - CA_file = /etc/raddb/certs/strongswanCert.pem - cipher_list = "DEFAULT" - dh_file = /etc/raddb/certs/dh - random_file = /etc/raddb/certs/random - } - ttls { - default_eap_type = md5 - use_tunneled_reply = yes - virtual_server = "inner-tunnel" - tnc_virtual_server = "inner-tunnel-second" - } -} - -eap eap_tnc { - default_eap_type = tnc - tnc { - } -} diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/proxy.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/proxy.conf deleted file mode 100644 index 23cba8d11..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/proxy.conf +++ /dev/null @@ -1,5 +0,0 @@ -realm strongswan.org { - type = radius - authhost = LOCAL - accthost = LOCAL -} diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/default b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/default deleted file mode 100644 index dd0825858..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/default +++ /dev/null @@ -1,43 +0,0 @@ -authorize { - suffix - eap { - ok = return - } - files -} - -authenticate { - eap -} - -preacct { - preprocess - acct_unique - suffix - files -} - -accounting { - detail - unix - radutmp - attr_filter.accounting_response -} - -session { - radutmp -} - -post-auth { - exec - Post-Auth-Type REJECT { - attr_filter.access_reject - } -} - -pre-proxy { -} - -post-proxy { - eap -} diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/inner-tunnel b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/inner-tunnel deleted file mode 100644 index e088fae14..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/inner-tunnel +++ /dev/null @@ -1,32 +0,0 @@ -server inner-tunnel { - -authorize { - suffix - eap { - ok = return - } - files -} - -authenticate { - eap -} - -session { - radutmp -} - -post-auth { - Post-Auth-Type REJECT { - attr_filter.access_reject - } -} - -pre-proxy { -} - -post-proxy { - eap -} - -} # inner-tunnel server block diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second deleted file mode 100644 index c5bde6a9e..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/sites-available/inner-tunnel-second +++ /dev/null @@ -1,36 +0,0 @@ -server inner-tunnel-second { - -authorize { - eap_tnc { - ok = return - } -} - -authenticate { - eap_tnc -} - -session { - radutmp -} - -post-auth { - if (control:TNC-Status == "Access") { - update reply { - Tunnel-Type := ESP - Filter-Id := "allow" - } - } - elsif (control:TNC-Status == "Isolate") { - update reply { - Tunnel-Type := ESP - Filter-Id := "isolate" - } - } - - Post-Auth-Type REJECT { - attr_filter.access_reject - } -} - -} # inner-tunnel-second block diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/users b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/users deleted file mode 100644 index 50ccf3e76..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/freeradius/users +++ /dev/null @@ -1,2 +0,0 @@ -carol Cleartext-Password := "Ar3etTnp" -dave Cleartext-Password := "W7R0g3do" diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/strongswan.conf deleted file mode 100644 index 7622801ab..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/strongswan.conf +++ /dev/null @@ -1,12 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -libimcv { - load = random nonce sha1 sha2 md5 gmp pubkey x509 - debug_level = 3 - assessment_result = no - plugins { - imv-test { - rounds = 1 - } - } -} diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/tnc/log4cxx.properties b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/tnc/log4cxx.properties deleted file mode 100644 index 2bdc6e4de..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/tnc/log4cxx.properties +++ /dev/null @@ -1,15 +0,0 @@ -# Set root logger level to DEBUG and its appenders to A1 and A2. -log4j.rootLogger=DEBUG, A1, A2 - -# A1 is set to be a ConsoleAppender. -log4j.appender.A1=org.apache.log4j.ConsoleAppender -log4j.appender.A1.layout=org.apache.log4j.PatternLayout -log4j.appender.A1.layout.ConversionPattern=[FHH] %m%n - -# A2 is set to be a SyslogAppender -log4j.appender.A2=org.apache.log4j.net.SyslogAppender -log4j.appender.A2.Facility=DAEMON -log4j.appender.A2.SyslogHost=localhost -log4j.appender.A2.Threshold=DEBUG -log4j.appender.A2.layout=org.apache.log4j.PatternLayout -log4j.appender.A2.layout.ConversionPattern=[FHH] %m%n diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/tnc_config b/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/tnc_config deleted file mode 100644 index da732f68b..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/alice/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMV configuration file for strongSwan client - -IMV "Test" /usr/local/lib/ipsec/imcvs/imv-test.so -IMV "Scanner" /usr/local/lib/ipsec/imcvs/imv-scanner.so diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/strongswan.conf deleted file mode 100644 index 965752b5e..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/strongswan.conf +++ /dev/null @@ -1,11 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -libimcv { - load = random nonce sha1 sha2 md5 gmp pubkey x509 - debug_level = 3 - plugins { - imc-test { - command = allow - } - } -} diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/swanctl/swanctl.conf deleted file mode 100644 index 00ef0f516..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/swanctl/swanctl.conf +++ /dev/null @@ -1 +0,0 @@ -# The strongSwan IMCs are loaded by the WPA supplicant diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/tnc_config b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/tnc_config deleted file mode 100644 index b4288fd53..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMC configuration file for strongSwan client - -IMC "Test" /usr/local/lib/ipsec/imcvs/imc-test.so -IMC "Scanner" /usr/local/lib/ipsec/imcvs/imc-scanner.so diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/wpa_supplicant.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/wpa_supplicant.conf deleted file mode 100644 index 92d84f570..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/carol/etc/wpa_supplicant.conf +++ /dev/null @@ -1,10 +0,0 @@ - network={ - ssid="eap_ttls" - scan_ssid=0 - key_mgmt=IEEE8021X - eap=TTLS - identity="carol" - password="Ar3etTnp" - ca_cert="/etc/ipsec.d/cacerts/strongswanCert.pem" - id_str="" - } diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/strongswan.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/strongswan.conf deleted file mode 100644 index ca1f7d9a5..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/strongswan.conf +++ /dev/null @@ -1,11 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -libimcv { - load = random nonce sha1 sha2 md5 gmp pubkey x509 - debug_level = 3 - plugins { - imc-test { - command = isolate - } - } -} diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/swanctl/swanctl.conf deleted file mode 100644 index 00ef0f516..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/swanctl/swanctl.conf +++ /dev/null @@ -1 +0,0 @@ -# The strongSwan IMCs are loaded by the WPA supplicant diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/tnc_config b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/tnc_config deleted file mode 100644 index b4288fd53..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/tnc_config +++ /dev/null @@ -1,4 +0,0 @@ -#IMC configuration file for strongSwan client - -IMC "Test" /usr/local/lib/ipsec/imcvs/imc-test.so -IMC "Scanner" /usr/local/lib/ipsec/imcvs/imc-scanner.so diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/wpa_supplicant.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/wpa_supplicant.conf deleted file mode 100644 index 37a343df6..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/dave/etc/wpa_supplicant.conf +++ /dev/null @@ -1,10 +0,0 @@ - network={ - ssid="eap_ttls" - scan_ssid=0 - key_mgmt=IEEE8021X - eap=TTLS - identity="dave" - password="W7R0g3do" - ca_cert="/etc/ipsec.d/cacerts/strongswanCert.pem" - id_str="" - } diff --git a/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/hostapd/hostapd.conf b/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/hostapd/hostapd.conf deleted file mode 100644 index c84fcbd91..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/hosts/moon/etc/hostapd/hostapd.conf +++ /dev/null @@ -1,1127 +0,0 @@ -##### hostapd configuration file ############################################## -# Empty lines and lines starting with # are ignored - -# AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for -# management frames); ath0 for madwifi -interface=eth0 - -# In case of madwifi, atheros, and nl80211 driver interfaces, an additional -# configuration parameter, bridge, may be used to notify hostapd if the -# interface is included in a bridge. This parameter is not used with Host AP -# driver. If the bridge parameter is not set, the drivers will automatically -# figure out the bridge interface (assuming sysfs is enabled and mounted to -# /sys) and this parameter may not be needed. -# -# For nl80211, this parameter can be used to request the AP interface to be -# added to the bridge automatically (brctl may refuse to do this before hostapd -# has been started to change the interface mode). If needed, the bridge -# interface is also created. -#bridge=br0 - -# Driver interface type (hostap/wired/madwifi/test/none/nl80211/bsd); -# default: hostap). nl80211 is used with all Linux mac80211 drivers. -# Use driver=none if building hostapd as a standalone RADIUS server that does -# not control any wireless/wired driver. -driver=wired - -# hostapd event logger configuration -# -# Two output method: syslog and stdout (only usable if not forking to -# background). -# -# Module bitfield (ORed bitfield of modules that will be logged; -1 = all -# modules): -# bit 0 (1) = IEEE 802.11 -# bit 1 (2) = IEEE 802.1X -# bit 2 (4) = RADIUS -# bit 3 (8) = WPA -# bit 4 (16) = driver interface -# bit 5 (32) = IAPP -# bit 6 (64) = MLME -# -# Levels (minimum value for logged events): -# 0 = verbose debugging -# 1 = debugging -# 2 = informational messages -# 3 = notification -# 4 = warning -# -logger_syslog=-1 -logger_syslog_level=2 -logger_stdout=-1 -logger_stdout_level=0 - -# Dump file for state information (on SIGUSR1) -dump_file=/tmp/hostapd.dump - -# Interface for separate control program. If this is specified, hostapd -# will create this directory and a UNIX domain socket for listening to requests -# from external programs (CLI/GUI, etc.) for status information and -# configuration. The socket file will be named based on the interface name, so -# multiple hostapd processes/interfaces can be run at the same time if more -# than one interface is used. -# /var/run/hostapd is the recommended directory for sockets and by default, -# hostapd_cli will use it when trying to connect with hostapd. -ctrl_interface=/var/run/hostapd - -# Access control for the control interface can be configured by setting the -# directory to allow only members of a group to use sockets. This way, it is -# possible to run hostapd as root (since it needs to change network -# configuration and open raw sockets) and still allow GUI/CLI components to be -# run as non-root users. However, since the control interface can be used to -# change the network configuration, this access needs to be protected in many -# cases. By default, hostapd is configured to use gid 0 (root). If you -# want to allow non-root users to use the contron interface, add a new group -# and change this value to match with that group. Add users that should have -# control interface access to this group. -# -# This variable can be a group name or gid. -#ctrl_interface_group=wheel -ctrl_interface_group=0 - - -##### IEEE 802.11 related configuration ####################################### - -# SSID to be used in IEEE 802.11 management frames -#ssid=test - -# Country code (ISO/IEC 3166-1). Used to set regulatory domain. -# Set as needed to indicate country in which device is operating. -# This can limit available channels and transmit power. -#country_code=US - -# Enable IEEE 802.11d. This advertises the country_code and the set of allowed -# channels and transmit power levels based on the regulatory limits. The -# country_code setting must be configured with the correct country for -# IEEE 802.11d functions. -# (default: 0 = disabled) -#ieee80211d=1 - -# Operation mode (a = IEEE 802.11a, b = IEEE 802.11b, g = IEEE 802.11g, -# Default: IEEE 802.11b -hw_mode=g - -# Channel number (IEEE 802.11) -# (default: 0, i.e., not set) -# Please note that some drivers do not use this value from hostapd and the -# channel will need to be configured separately with iwconfig. -channel=1 - -# Beacon interval in kus (1.024 ms) (default: 100; range 15..65535) -beacon_int=100 - -# DTIM (delivery traffic information message) period (range 1..255): -# number of beacons between DTIMs (1 = every beacon includes DTIM element) -# (default: 2) -dtim_period=2 - -# Maximum number of stations allowed in station table. New stations will be -# rejected after the station table is full. IEEE 802.11 has a limit of 2007 -# different association IDs, so this number should not be larger than that. -# (default: 2007) -max_num_sta=255 - -# RTS/CTS threshold; 2347 = disabled (default); range 0..2347 -# If this field is not included in hostapd.conf, hostapd will not control -# RTS threshold and 'iwconfig wlan# rts <val>' can be used to set it. -rts_threshold=2347 - -# Fragmentation threshold; 2346 = disabled (default); range 256..2346 -# If this field is not included in hostapd.conf, hostapd will not control -# fragmentation threshold and 'iwconfig wlan# frag <val>' can be used to set -# it. -fragm_threshold=2346 - -# Rate configuration -# Default is to enable all rates supported by the hardware. This configuration -# item allows this list be filtered so that only the listed rates will be left -# in the list. If the list is empty, all rates are used. This list can have -# entries that are not in the list of rates the hardware supports (such entries -# are ignored). The entries in this list are in 100 kbps, i.e., 11 Mbps = 110. -# If this item is present, at least one rate have to be matching with the rates -# hardware supports. -# default: use the most common supported rate setting for the selected -# hw_mode (i.e., this line can be removed from configuration file in most -# cases) -#supported_rates=10 20 55 110 60 90 120 180 240 360 480 540 - -# Basic rate set configuration -# List of rates (in 100 kbps) that are included in the basic rate set. -# If this item is not included, usually reasonable default set is used. -#basic_rates=10 20 -#basic_rates=10 20 55 110 -#basic_rates=60 120 240 - -# Short Preamble -# This parameter can be used to enable optional use of short preamble for -# frames sent at 2 Mbps, 5.5 Mbps, and 11 Mbps to improve network performance. -# This applies only to IEEE 802.11b-compatible networks and this should only be -# enabled if the local hardware supports use of short preamble. If any of the -# associated STAs do not support short preamble, use of short preamble will be -# disabled (and enabled when such STAs disassociate) dynamically. -# 0 = do not allow use of short preamble (default) -# 1 = allow use of short preamble -#preamble=1 - -# Station MAC address -based authentication -# Please note that this kind of access control requires a driver that uses -# hostapd to take care of management frame processing and as such, this can be -# used with driver=hostap or driver=nl80211, but not with driver=madwifi. -# 0 = accept unless in deny list -# 1 = deny unless in accept list -# 2 = use external RADIUS server (accept/deny lists are searched first) -macaddr_acl=0 - -# Accept/deny lists are read from separate files (containing list of -# MAC addresses, one per line). Use absolute path name to make sure that the -# files can be read on SIGHUP configuration reloads. -#accept_mac_file=/etc/hostapd.accept -#deny_mac_file=/etc/hostapd.deny - -# IEEE 802.11 specifies two authentication algorithms. hostapd can be -# configured to allow both of these or only one. Open system authentication -# should be used with IEEE 802.1X. -# Bit fields of allowed authentication algorithms: -# bit 0 = Open System Authentication -# bit 1 = Shared Key Authentication (requires WEP) -auth_algs=3 - -# Send empty SSID in beacons and ignore probe request frames that do not -# specify full SSID, i.e., require stations to know SSID. -# default: disabled (0) -# 1 = send empty (length=0) SSID in beacon and ignore probe request for -# broadcast SSID -# 2 = clear SSID (ASCII 0), but keep the original length (this may be required -# with some clients that do not support empty SSID) and ignore probe -# requests for broadcast SSID -ignore_broadcast_ssid=0 - -# TX queue parameters (EDCF / bursting) -# tx_queue_<queue name>_<param> -# queues: data0, data1, data2, data3, after_beacon, beacon -# (data0 is the highest priority queue) -# parameters: -# aifs: AIFS (default 2) -# cwmin: cwMin (1, 3, 7, 15, 31, 63, 127, 255, 511, 1023) -# cwmax: cwMax (1, 3, 7, 15, 31, 63, 127, 255, 511, 1023); cwMax >= cwMin -# burst: maximum length (in milliseconds with precision of up to 0.1 ms) for -# bursting -# -# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e): -# These parameters are used by the access point when transmitting frames -# to the clients. -# -# Low priority / AC_BK = background -#tx_queue_data3_aifs=7 -#tx_queue_data3_cwmin=15 -#tx_queue_data3_cwmax=1023 -#tx_queue_data3_burst=0 -# Note: for IEEE 802.11b mode: cWmin=31 cWmax=1023 burst=0 -# -# Normal priority / AC_BE = best effort -#tx_queue_data2_aifs=3 -#tx_queue_data2_cwmin=15 -#tx_queue_data2_cwmax=63 -#tx_queue_data2_burst=0 -# Note: for IEEE 802.11b mode: cWmin=31 cWmax=127 burst=0 -# -# High priority / AC_VI = video -#tx_queue_data1_aifs=1 -#tx_queue_data1_cwmin=7 -#tx_queue_data1_cwmax=15 -#tx_queue_data1_burst=3.0 -# Note: for IEEE 802.11b mode: cWmin=15 cWmax=31 burst=6.0 -# -# Highest priority / AC_VO = voice -#tx_queue_data0_aifs=1 -#tx_queue_data0_cwmin=3 -#tx_queue_data0_cwmax=7 -#tx_queue_data0_burst=1.5 -# Note: for IEEE 802.11b mode: cWmin=7 cWmax=15 burst=3.3 - -# 802.1D Tag (= UP) to AC mappings -# WMM specifies following mapping of data frames to different ACs. This mapping -# can be configured using Linux QoS/tc and sch_pktpri.o module. -# 802.1D Tag 802.1D Designation Access Category WMM Designation -# 1 BK AC_BK Background -# 2 - AC_BK Background -# 0 BE AC_BE Best Effort -# 3 EE AC_BE Best Effort -# 4 CL AC_VI Video -# 5 VI AC_VI Video -# 6 VO AC_VO Voice -# 7 NC AC_VO Voice -# Data frames with no priority information: AC_BE -# Management frames: AC_VO -# PS-Poll frames: AC_BE - -# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e): -# for 802.11a or 802.11g networks -# These parameters are sent to WMM clients when they associate. -# The parameters will be used by WMM clients for frames transmitted to the -# access point. -# -# note - txop_limit is in units of 32microseconds -# note - acm is admission control mandatory flag. 0 = admission control not -# required, 1 = mandatory -# note - here cwMin and cmMax are in exponent form. the actual cw value used -# will be (2^n)-1 where n is the value given here -# -wmm_enabled=1 -# -# WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD] -# Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver) -#uapsd_advertisement_enabled=1 -# -# Low priority / AC_BK = background -wmm_ac_bk_cwmin=4 -wmm_ac_bk_cwmax=10 -wmm_ac_bk_aifs=7 -wmm_ac_bk_txop_limit=0 -wmm_ac_bk_acm=0 -# Note: for IEEE 802.11b mode: cWmin=5 cWmax=10 -# -# Normal priority / AC_BE = best effort -wmm_ac_be_aifs=3 -wmm_ac_be_cwmin=4 -wmm_ac_be_cwmax=10 -wmm_ac_be_txop_limit=0 -wmm_ac_be_acm=0 -# Note: for IEEE 802.11b mode: cWmin=5 cWmax=7 -# -# High priority / AC_VI = video -wmm_ac_vi_aifs=2 -wmm_ac_vi_cwmin=3 -wmm_ac_vi_cwmax=4 -wmm_ac_vi_txop_limit=94 -wmm_ac_vi_acm=0 -# Note: for IEEE 802.11b mode: cWmin=4 cWmax=5 txop_limit=188 -# -# Highest priority / AC_VO = voice -wmm_ac_vo_aifs=2 -wmm_ac_vo_cwmin=2 -wmm_ac_vo_cwmax=3 -wmm_ac_vo_txop_limit=47 -wmm_ac_vo_acm=0 -# Note: for IEEE 802.11b mode: cWmin=3 cWmax=4 burst=102 - -# Static WEP key configuration -# -# The key number to use when transmitting. -# It must be between 0 and 3, and the corresponding key must be set. -# default: not set -#wep_default_key=0 -# The WEP keys to use. -# A key may be a quoted string or unquoted hexadecimal digits. -# The key length should be 5, 13, or 16 characters, or 10, 26, or 32 -# digits, depending on whether 40-bit (64-bit), 104-bit (128-bit), or -# 128-bit (152-bit) WEP is used. -# Only the default key must be supplied; the others are optional. -# default: not set -#wep_key0=123456789a -#wep_key1="vwxyz" -#wep_key2=0102030405060708090a0b0c0d -#wep_key3=".2.4.6.8.0.23" - -# Station inactivity limit -# -# If a station does not send anything in ap_max_inactivity seconds, an -# empty data frame is sent to it in order to verify whether it is -# still in range. If this frame is not ACKed, the station will be -# disassociated and then deauthenticated. This feature is used to -# clear station table of old entries when the STAs move out of the -# range. -# -# The station can associate again with the AP if it is still in range; -# this inactivity poll is just used as a nicer way of verifying -# inactivity; i.e., client will not report broken connection because -# disassociation frame is not sent immediately without first polling -# the STA with a data frame. -# default: 300 (i.e., 5 minutes) -ap_max_inactivity=30 - -# Disassociate stations based on excessive transmission failures or other -# indications of connection loss. This depends on the driver capabilities and -# may not be available with all drivers. -#disassoc_low_ack=1 - -# Maximum allowed Listen Interval (how many Beacon periods STAs are allowed to -# remain asleep). Default: 65535 (no limit apart from field size) -#max_listen_interval=100 - -# WDS (4-address frame) mode with per-station virtual interfaces -# (only supported with driver=nl80211) -# This mode allows associated stations to use 4-address frames to allow layer 2 -# bridging to be used. -#wds_sta=1 - -# If bridge parameter is set, the WDS STA interface will be added to the same -# bridge by default. This can be overridden with the wds_bridge parameter to -# use a separate bridge. -#wds_bridge=wds-br0 - -# Client isolation can be used to prevent low-level bridging of frames between -# associated stations in the BSS. By default, this bridging is allowed. -#ap_isolate=1 - -##### IEEE 802.11n related configuration ###################################### - -# ieee80211n: Whether IEEE 802.11n (HT) is enabled -# 0 = disabled (default) -# 1 = enabled -# Note: You will also need to enable WMM for full HT functionality. -#ieee80211n=1 - -# ht_capab: HT capabilities (list of flags) -# LDPC coding capability: [LDPC] = supported -# Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary -# channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz -# with secondary channel below the primary channel -# (20 MHz only if neither is set) -# Note: There are limits on which channels can be used with HT40- and -# HT40+. Following table shows the channels that may be available for -# HT40- and HT40+ use per IEEE 802.11n Annex J: -# freq HT40- HT40+ -# 2.4 GHz 5-13 1-7 (1-9 in Europe/Japan) -# 5 GHz 40,48,56,64 36,44,52,60 -# (depending on the location, not all of these channels may be available -# for use) -# Please note that 40 MHz channels may switch their primary and secondary -# channels if needed or creation of 40 MHz channel maybe rejected based -# on overlapping BSSes. These changes are done automatically when hostapd -# is setting up the 40 MHz channel. -# Spatial Multiplexing (SM) Power Save: [SMPS-STATIC] or [SMPS-DYNAMIC] -# (SMPS disabled if neither is set) -# HT-greenfield: [GF] (disabled if not set) -# Short GI for 20 MHz: [SHORT-GI-20] (disabled if not set) -# Short GI for 40 MHz: [SHORT-GI-40] (disabled if not set) -# Tx STBC: [TX-STBC] (disabled if not set) -# Rx STBC: [RX-STBC1] (one spatial stream), [RX-STBC12] (one or two spatial -# streams), or [RX-STBC123] (one, two, or three spatial streams); Rx STBC -# disabled if none of these set -# HT-delayed Block Ack: [DELAYED-BA] (disabled if not set) -# Maximum A-MSDU length: [MAX-AMSDU-7935] for 7935 octets (3839 octets if not -# set) -# DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set) -# PSMP support: [PSMP] (disabled if not set) -# L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set) -#ht_capab=[HT40-][SHORT-GI-20][SHORT-GI-40] - -# Require stations to support HT PHY (reject association if they do not) -#require_ht=1 - -##### IEEE 802.1X-2004 related configuration ################################## - -# Require IEEE 802.1X authorization -ieee8021x=1 - -# IEEE 802.1X/EAPOL version -# hostapd is implemented based on IEEE Std 802.1X-2004 which defines EAPOL -# version 2. However, there are many client implementations that do not handle -# the new version number correctly (they seem to drop the frames completely). -# In order to make hostapd interoperate with these clients, the version number -# can be set to the older version (1) with this configuration value. -#eapol_version=2 - -# Optional displayable message sent with EAP Request-Identity. The first \0 -# in this string will be converted to ASCII-0 (nul). This can be used to -# separate network info (comma separated list of attribute=value pairs); see, -# e.g., RFC 4284. -#eap_message=hello -#eap_message=hello\0networkid=netw,nasid=foo,portid=0,NAIRealms=example.com - -# WEP rekeying (disabled if key lengths are not set or are set to 0) -# Key lengths for default/broadcast and individual/unicast keys: -# 5 = 40-bit WEP (also known as 64-bit WEP with 40 secret bits) -# 13 = 104-bit WEP (also known as 128-bit WEP with 104 secret bits) -#wep_key_len_broadcast=5 -#wep_key_len_unicast=5 -# Rekeying period in seconds. 0 = do not rekey (i.e., set keys only once) -#wep_rekey_period=300 - -# EAPOL-Key index workaround (set bit7) for WinXP Supplicant (needed only if -# only broadcast keys are used) -eapol_key_index_workaround=0 - -# EAP reauthentication period in seconds (default: 3600 seconds; 0 = disable -# reauthentication). -#eap_reauth_period=3600 - -# Use PAE group address (01:80:c2:00:00:03) instead of individual target -# address when sending EAPOL frames with driver=wired. This is the most common -# mechanism used in wired authentication, but it also requires that the port -# is only used by one station. -#use_pae_group_addr=1 - -##### Integrated EAP server ################################################### - -# Optionally, hostapd can be configured to use an integrated EAP server -# to process EAP authentication locally without need for an external RADIUS -# server. This functionality can be used both as a local authentication server -# for IEEE 802.1X/EAPOL and as a RADIUS server for other devices. - -# Use integrated EAP server instead of external RADIUS authentication -# server. This is also needed if hostapd is configured to act as a RADIUS -# authentication server. -eap_server=0 - -# Path for EAP server user database -#eap_user_file=/etc/hostapd.eap_user - -# CA certificate (PEM or DER file) for EAP-TLS/PEAP/TTLS -#ca_cert=/etc/hostapd.ca.pem - -# Server certificate (PEM or DER file) for EAP-TLS/PEAP/TTLS -#server_cert=/etc/hostapd.server.pem - -# Private key matching with the server certificate for EAP-TLS/PEAP/TTLS -# This may point to the same file as server_cert if both certificate and key -# are included in a single file. PKCS#12 (PFX) file (.p12/.pfx) can also be -# used by commenting out server_cert and specifying the PFX file as the -# private_key. -#private_key=/etc/hostapd.server.prv - -# Passphrase for private key -#private_key_passwd=secret passphrase - -# Enable CRL verification. -# Note: hostapd does not yet support CRL downloading based on CDP. Thus, a -# valid CRL signed by the CA is required to be included in the ca_cert file. -# This can be done by using PEM format for CA certificate and CRL and -# concatenating these into one file. Whenever CRL changes, hostapd needs to be -# restarted to take the new CRL into use. -# 0 = do not verify CRLs (default) -# 1 = check the CRL of the user certificate -# 2 = check all CRLs in the certificate path -#check_crl=1 - -# dh_file: File path to DH/DSA parameters file (in PEM format) -# This is an optional configuration file for setting parameters for an -# ephemeral DH key exchange. In most cases, the default RSA authentication does -# not use this configuration. However, it is possible setup RSA to use -# ephemeral DH key exchange. In addition, ciphers with DSA keys always use -# ephemeral DH keys. This can be used to achieve forward secrecy. If the file -# is in DSA parameters format, it will be automatically converted into DH -# params. This parameter is required if anonymous EAP-FAST is used. -# You can generate DH parameters file with OpenSSL, e.g., -# "openssl dhparam -out /etc/hostapd.dh.pem 1024" -#dh_file=/etc/hostapd.dh.pem - -# Fragment size for EAP methods -#fragment_size=1400 - -# Configuration data for EAP-SIM database/authentication gateway interface. -# This is a text string in implementation specific format. The example -# implementation in eap_sim_db.c uses this as the UNIX domain socket name for -# the HLR/AuC gateway (e.g., hlr_auc_gw). In this case, the path uses "unix:" -# prefix. -#eap_sim_db=unix:/tmp/hlr_auc_gw.sock - -# Encryption key for EAP-FAST PAC-Opaque values. This key must be a secret, -# random value. It is configured as a 16-octet value in hex format. It can be -# generated, e.g., with the following command: -# od -tx1 -v -N16 /dev/random | colrm 1 8 | tr -d ' ' -#pac_opaque_encr_key=000102030405060708090a0b0c0d0e0f - -# EAP-FAST authority identity (A-ID) -# A-ID indicates the identity of the authority that issues PACs. The A-ID -# should be unique across all issuing servers. In theory, this is a variable -# length field, but due to some existing implementations requiring A-ID to be -# 16 octets in length, it is strongly recommended to use that length for the -# field to provid interoperability with deployed peer implementations. This -# field is configured in hex format. -#eap_fast_a_id=101112131415161718191a1b1c1d1e1f - -# EAP-FAST authority identifier information (A-ID-Info) -# This is a user-friendly name for the A-ID. For example, the enterprise name -# and server name in a human-readable format. This field is encoded as UTF-8. -#eap_fast_a_id_info=test server - -# Enable/disable different EAP-FAST provisioning modes: -#0 = provisioning disabled -#1 = only anonymous provisioning allowed -#2 = only authenticated provisioning allowed -#3 = both provisioning modes allowed (default) -#eap_fast_prov=3 - -# EAP-FAST PAC-Key lifetime in seconds (hard limit) -#pac_key_lifetime=604800 - -# EAP-FAST PAC-Key refresh time in seconds (soft limit on remaining hard -# limit). The server will generate a new PAC-Key when this number of seconds -# (or fewer) of the lifetime remains. -#pac_key_refresh_time=86400 - -# EAP-SIM and EAP-AKA protected success/failure indication using AT_RESULT_IND -# (default: 0 = disabled). -#eap_sim_aka_result_ind=1 - -# Trusted Network Connect (TNC) -# If enabled, TNC validation will be required before the peer is allowed to -# connect. Note: This is only used with EAP-TTLS and EAP-FAST. If any other -# EAP method is enabled, the peer will be allowed to connect without TNC. -#tnc=1 - - -##### IEEE 802.11f - Inter-Access Point Protocol (IAPP) ####################### - -# Interface to be used for IAPP broadcast packets -#iapp_interface=eth0 - - -##### RADIUS client configuration ############################################# -# for IEEE 802.1X with external Authentication Server, IEEE 802.11 -# authentication with external ACL for MAC addresses, and accounting - -# The own IP address of the access point (used as NAS-IP-Address) -own_ip_addr=10.1.0.1 - -# Optional NAS-Identifier string for RADIUS messages. When used, this should be -# a unique to the NAS within the scope of the RADIUS server. For example, a -# fully qualified domain name can be used here. -# When using IEEE 802.11r, nas_identifier must be set and must be between 1 and -# 48 octets long. -#nas_identifier=ap.example.com - -# RADIUS authentication server -auth_server_addr=10.1.0.10 -#auth_server_port=1812 -auth_server_shared_secret=gv6URkSs - -# RADIUS accounting server -#acct_server_addr=127.0.0.1 -#acct_server_port=1813 -#acct_server_shared_secret=secret - -# Secondary RADIUS servers; to be used if primary one does not reply to -# RADIUS packets. These are optional and there can be more than one secondary -# server listed. -#auth_server_addr=127.0.0.2 -#auth_server_port=1812 -#auth_server_shared_secret=secret2 -# -#acct_server_addr=127.0.0.2 -#acct_server_port=1813 -#acct_server_shared_secret=secret2 - -# Retry interval for trying to return to the primary RADIUS server (in -# seconds). RADIUS client code will automatically try to use the next server -# when the current server is not replying to requests. If this interval is set, -# primary server will be retried after configured amount of time even if the -# currently used secondary server is still working. -#radius_retry_primary_interval=600 - - -# Interim accounting update interval -# If this is set (larger than 0) and acct_server is configured, hostapd will -# send interim accounting updates every N seconds. Note: if set, this overrides -# possible Acct-Interim-Interval attribute in Access-Accept message. Thus, this -# value should not be configured in hostapd.conf, if RADIUS server is used to -# control the interim interval. -# This value should not be less 600 (10 minutes) and must not be less than -# 60 (1 minute). -#radius_acct_interim_interval=600 - -# Dynamic VLAN mode; allow RADIUS authentication server to decide which VLAN -# is used for the stations. This information is parsed from following RADIUS -# attributes based on RFC 3580 and RFC 2868: Tunnel-Type (value 13 = VLAN), -# Tunnel-Medium-Type (value 6 = IEEE 802), Tunnel-Private-Group-ID (value -# VLANID as a string). vlan_file option below must be configured if dynamic -# VLANs are used. Optionally, the local MAC ACL list (accept_mac_file) can be -# used to set static client MAC address to VLAN ID mapping. -# 0 = disabled (default) -# 1 = option; use default interface if RADIUS server does not include VLAN ID -# 2 = required; reject authentication if RADIUS server does not include VLAN ID -#dynamic_vlan=0 - -# VLAN interface list for dynamic VLAN mode is read from a separate text file. -# This list is used to map VLAN ID from the RADIUS server to a network -# interface. Each station is bound to one interface in the same way as with -# multiple BSSIDs or SSIDs. Each line in this text file is defining a new -# interface and the line must include VLAN ID and interface name separated by -# white space (space or tab). -#vlan_file=/etc/hostapd.vlan - -# Interface where 802.1q tagged packets should appear when a RADIUS server is -# used to determine which VLAN a station is on. hostapd creates a bridge for -# each VLAN. Then hostapd adds a VLAN interface (associated with the interface -# indicated by 'vlan_tagged_interface') and the appropriate wireless interface -# to the bridge. -#vlan_tagged_interface=eth0 - - -##### RADIUS authentication server configuration ############################## - -# hostapd can be used as a RADIUS authentication server for other hosts. This -# requires that the integrated EAP server is also enabled and both -# authentication services are sharing the same configuration. - -# File name of the RADIUS clients configuration for the RADIUS server. If this -# commented out, RADIUS server is disabled. -#radius_server_clients=/etc/hostapd.radius_clients - -# The UDP port number for the RADIUS authentication server -#radius_server_auth_port=1812 - -# Use IPv6 with RADIUS server (IPv4 will also be supported using IPv6 API) -#radius_server_ipv6=1 - - -##### WPA/IEEE 802.11i configuration ########################################## - -# Enable WPA. Setting this variable configures the AP to require WPA (either -# WPA-PSK or WPA-RADIUS/EAP based on other configuration). For WPA-PSK, either -# wpa_psk or wpa_passphrase must be set and wpa_key_mgmt must include WPA-PSK. -# For WPA-RADIUS/EAP, ieee8021x must be set (but without dynamic WEP keys), -# RADIUS authentication server must be configured, and WPA-EAP must be included -# in wpa_key_mgmt. -# This field is a bit field that can be used to enable WPA (IEEE 802.11i/D3.0) -# and/or WPA2 (full IEEE 802.11i/RSN): -# bit0 = WPA -# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled) -#wpa=1 - -# WPA pre-shared keys for WPA-PSK. This can be either entered as a 256-bit -# secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase -# (8..63 characters) that will be converted to PSK. This conversion uses SSID -# so the PSK changes when ASCII passphrase is used and the SSID is changed. -# wpa_psk (dot11RSNAConfigPSKValue) -# wpa_passphrase (dot11RSNAConfigPSKPassPhrase) -#wpa_psk=0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef -#wpa_passphrase=secret passphrase - -# Optionally, WPA PSKs can be read from a separate text file (containing list -# of (PSK,MAC address) pairs. This allows more than one PSK to be configured. -# Use absolute path name to make sure that the files can be read on SIGHUP -# configuration reloads. -#wpa_psk_file=/etc/hostapd.wpa_psk - -# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The -# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be -# added to enable SHA256-based stronger algorithms. -# (dot11RSNAConfigAuthenticationSuitesTable) -#wpa_key_mgmt=WPA-PSK WPA-EAP - -# Set of accepted cipher suites (encryption algorithms) for pairwise keys -# (unicast packets). This is a space separated list of algorithms: -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] -# Group cipher suite (encryption algorithm for broadcast and multicast frames) -# is automatically selected based on this configuration. If only CCMP is -# allowed as the pairwise cipher, group cipher will also be CCMP. Otherwise, -# TKIP will be used as the group cipher. -# (dot11RSNAConfigPairwiseCiphersTable) -# Pairwise cipher for WPA (v1) (default: TKIP) -#wpa_pairwise=TKIP CCMP -# Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value) -#rsn_pairwise=CCMP - -# Time interval for rekeying GTK (broadcast/multicast encryption keys) in -# seconds. (dot11RSNAConfigGroupRekeyTime) -#wpa_group_rekey=600 - -# Rekey GTK when any STA that possesses the current GTK is leaving the BSS. -# (dot11RSNAConfigGroupRekeyStrict) -#wpa_strict_rekey=1 - -# Time interval for rekeying GMK (master key used internally to generate GTKs -# (in seconds). -#wpa_gmk_rekey=86400 - -# Maximum lifetime for PTK in seconds. This can be used to enforce rekeying of -# PTK to mitigate some attacks against TKIP deficiencies. -#wpa_ptk_rekey=600 - -# Enable IEEE 802.11i/RSN/WPA2 pre-authentication. This is used to speed up -# roaming be pre-authenticating IEEE 802.1X/EAP part of the full RSN -# authentication and key handshake before actually associating with a new AP. -# (dot11RSNAPreauthenticationEnabled) -#rsn_preauth=1 -# -# Space separated list of interfaces from which pre-authentication frames are -# accepted (e.g., 'eth0' or 'eth0 wlan0wds0'. This list should include all -# interface that are used for connections to other APs. This could include -# wired interfaces and WDS links. The normal wireless data interface towards -# associated stations (e.g., wlan0) should not be added, since -# pre-authentication is only used with APs other than the currently associated -# one. -#rsn_preauth_interfaces=eth0 - -# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e) is -# allowed. This is only used with RSN/WPA2. -# 0 = disabled (default) -# 1 = enabled -#peerkey=1 - -# ieee80211w: Whether management frame protection (MFP) is enabled -# 0 = disabled (default) -# 1 = optional -# 2 = required -#ieee80211w=0 - -# Association SA Query maximum timeout (in TU = 1.024 ms; for MFP) -# (maximum time to wait for a SA Query response) -# dot11AssociationSAQueryMaximumTimeout, 1...4294967295 -#assoc_sa_query_max_timeout=1000 - -# Association SA Query retry timeout (in TU = 1.024 ms; for MFP) -# (time between two subsequent SA Query requests) -# dot11AssociationSAQueryRetryTimeout, 1...4294967295 -#assoc_sa_query_retry_timeout=201 - -# disable_pmksa_caching: Disable PMKSA caching -# This parameter can be used to disable caching of PMKSA created through EAP -# authentication. RSN preauthentication may still end up using PMKSA caching if -# it is enabled (rsn_preauth=1). -# 0 = PMKSA caching enabled (default) -# 1 = PMKSA caching disabled -#disable_pmksa_caching=0 - -# okc: Opportunistic Key Caching (aka Proactive Key Caching) -# Allow PMK cache to be shared opportunistically among configured interfaces -# and BSSes (i.e., all configurations within a single hostapd process). -# 0 = disabled (default) -# 1 = enabled -#okc=1 - - -##### IEEE 802.11r configuration ############################################## - -# Mobility Domain identifier (dot11FTMobilityDomainID, MDID) -# MDID is used to indicate a group of APs (within an ESS, i.e., sharing the -# same SSID) between which a STA can use Fast BSS Transition. -# 2-octet identifier as a hex string. -#mobility_domain=a1b2 - -# PMK-R0 Key Holder identifier (dot11FTR0KeyHolderID) -# 1 to 48 octet identifier. -# This is configured with nas_identifier (see RADIUS client section above). - -# Default lifetime of the PMK-RO in minutes; range 1..65535 -# (dot11FTR0KeyLifetime) -#r0_key_lifetime=10000 - -# PMK-R1 Key Holder identifier (dot11FTR1KeyHolderID) -# 6-octet identifier as a hex string. -#r1_key_holder=000102030405 - -# Reassociation deadline in time units (TUs / 1.024 ms; range 1000..65535) -# (dot11FTReassociationDeadline) -#reassociation_deadline=1000 - -# List of R0KHs in the same Mobility Domain -# format: <MAC address> <NAS Identifier> <128-bit key as hex string> -# This list is used to map R0KH-ID (NAS Identifier) to a destination MAC -# address when requesting PMK-R1 key from the R0KH that the STA used during the -# Initial Mobility Domain Association. -#r0kh=02:01:02:03:04:05 r0kh-1.example.com 000102030405060708090a0b0c0d0e0f -#r0kh=02:01:02:03:04:06 r0kh-2.example.com 00112233445566778899aabbccddeeff -# And so on.. One line per R0KH. - -# List of R1KHs in the same Mobility Domain -# format: <MAC address> <R1KH-ID> <128-bit key as hex string> -# This list is used to map R1KH-ID to a destination MAC address when sending -# PMK-R1 key from the R0KH. This is also the list of authorized R1KHs in the MD -# that can request PMK-R1 keys. -#r1kh=02:01:02:03:04:05 02:11:22:33:44:55 000102030405060708090a0b0c0d0e0f -#r1kh=02:01:02:03:04:06 02:11:22:33:44:66 00112233445566778899aabbccddeeff -# And so on.. One line per R1KH. - -# Whether PMK-R1 push is enabled at R0KH -# 0 = do not push PMK-R1 to all configured R1KHs (default) -# 1 = push PMK-R1 to all configured R1KHs whenever a new PMK-R0 is derived -#pmk_r1_push=1 - -##### Neighbor table ########################################################## -# Maximum number of entries kept in AP table (either for neigbor table or for -# detecting Overlapping Legacy BSS Condition). The oldest entry will be -# removed when adding a new entry that would make the list grow over this -# limit. Note! WFA certification for IEEE 802.11g requires that OLBC is -# enabled, so this field should not be set to 0 when using IEEE 802.11g. -# default: 255 -#ap_table_max_size=255 - -# Number of seconds of no frames received after which entries may be deleted -# from the AP table. Since passive scanning is not usually performed frequently -# this should not be set to very small value. In addition, there is no -# guarantee that every scan cycle will receive beacon frames from the -# neighboring APs. -# default: 60 -#ap_table_expiration_time=3600 - - -##### Wi-Fi Protected Setup (WPS) ############################################# - -# WPS state -# 0 = WPS disabled (default) -# 1 = WPS enabled, not configured -# 2 = WPS enabled, configured -#wps_state=2 - -# AP can be configured into a locked state where new WPS Registrar are not -# accepted, but previously authorized Registrars (including the internal one) -# can continue to add new Enrollees. -#ap_setup_locked=1 - -# Universally Unique IDentifier (UUID; see RFC 4122) of the device -# This value is used as the UUID for the internal WPS Registrar. If the AP -# is also using UPnP, this value should be set to the device's UPnP UUID. -# If not configured, UUID will be generated based on the local MAC address. -#uuid=12345678-9abc-def0-1234-56789abcdef0 - -# Note: If wpa_psk_file is set, WPS is used to generate random, per-device PSKs -# that will be appended to the wpa_psk_file. If wpa_psk_file is not set, the -# default PSK (wpa_psk/wpa_passphrase) will be delivered to Enrollees. Use of -# per-device PSKs is recommended as the more secure option (i.e., make sure to -# set wpa_psk_file when using WPS with WPA-PSK). - -# When an Enrollee requests access to the network with PIN method, the Enrollee -# PIN will need to be entered for the Registrar. PIN request notifications are -# sent to hostapd ctrl_iface monitor. In addition, they can be written to a -# text file that could be used, e.g., to populate the AP administration UI with -# pending PIN requests. If the following variable is set, the PIN requests will -# be written to the configured file. -#wps_pin_requests=/var/run/hostapd_wps_pin_requests - -# Device Name -# User-friendly description of device; up to 32 octets encoded in UTF-8 -#device_name=Wireless AP - -# Manufacturer -# The manufacturer of the device (up to 64 ASCII characters) -#manufacturer=Company - -# Model Name -# Model of the device (up to 32 ASCII characters) -#model_name=WAP - -# Model Number -# Additional device description (up to 32 ASCII characters) -#model_number=123 - -# Serial Number -# Serial number of the device (up to 32 characters) -#serial_number=12345 - -# Primary Device Type -# Used format: <categ>-<OUI>-<subcateg> -# categ = Category as an integer value -# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for -# default WPS OUI -# subcateg = OUI-specific Sub Category as an integer value -# Examples: -# 1-0050F204-1 (Computer / PC) -# 1-0050F204-2 (Computer / Server) -# 5-0050F204-1 (Storage / NAS) -# 6-0050F204-1 (Network Infrastructure / AP) -#device_type=6-0050F204-1 - -# OS Version -# 4-octet operating system version number (hex string) -#os_version=01020300 - -# Config Methods -# List of the supported configuration methods -# Available methods: usba ethernet label display ext_nfc_token int_nfc_token -# nfc_interface push_button keypad virtual_display physical_display -# virtual_push_button physical_push_button -#config_methods=label virtual_display virtual_push_button keypad - -# WPS capability discovery workaround for PBC with Windows 7 -# Windows 7 uses incorrect way of figuring out AP's WPS capabilities by acting -# as a Registrar and using M1 from the AP. The config methods attribute in that -# message is supposed to indicate only the configuration method supported by -# the AP in Enrollee role, i.e., to add an external Registrar. For that case, -# PBC shall not be used and as such, the PushButton config method is removed -# from M1 by default. If pbc_in_m1=1 is included in the configuration file, -# the PushButton config method is left in M1 (if included in config_methods -# parameter) to allow Windows 7 to use PBC instead of PIN (e.g., from a label -# in the AP). -#pbc_in_m1=1 - -# Static access point PIN for initial configuration and adding Registrars -# If not set, hostapd will not allow external WPS Registrars to control the -# access point. The AP PIN can also be set at runtime with hostapd_cli -# wps_ap_pin command. Use of temporary (enabled by user action) and random -# AP PIN is much more secure than configuring a static AP PIN here. As such, -# use of the ap_pin parameter is not recommended if the AP device has means for -# displaying a random PIN. -#ap_pin=12345670 - -# Skip building of automatic WPS credential -# This can be used to allow the automatically generated Credential attribute to -# be replaced with pre-configured Credential(s). -#skip_cred_build=1 - -# Additional Credential attribute(s) -# This option can be used to add pre-configured Credential attributes into M8 -# message when acting as a Registrar. If skip_cred_build=1, this data will also -# be able to override the Credential attribute that would have otherwise been -# automatically generated based on network configuration. This configuration -# option points to an external file that much contain the WPS Credential -# attribute(s) as binary data. -#extra_cred=hostapd.cred - -# Credential processing -# 0 = process received credentials internally (default) -# 1 = do not process received credentials; just pass them over ctrl_iface to -# external program(s) -# 2 = process received credentials internally and pass them over ctrl_iface -# to external program(s) -# Note: With wps_cred_processing=1, skip_cred_build should be set to 1 and -# extra_cred be used to provide the Credential data for Enrollees. -# -# wps_cred_processing=1 will disabled automatic updates of hostapd.conf file -# both for Credential processing and for marking AP Setup Locked based on -# validation failures of AP PIN. An external program is responsible on updating -# the configuration appropriately in this case. -#wps_cred_processing=0 - -# AP Settings Attributes for M7 -# By default, hostapd generates the AP Settings Attributes for M7 based on the -# current configuration. It is possible to override this by providing a file -# with pre-configured attributes. This is similar to extra_cred file format, -# but the AP Settings attributes are not encapsulated in a Credential -# attribute. -#ap_settings=hostapd.ap_settings - -# WPS UPnP interface -# If set, support for external Registrars is enabled. -#upnp_iface=br0 - -# Friendly Name (required for UPnP) -# Short description for end use. Should be less than 64 characters. -#friendly_name=WPS Access Point - -# Manufacturer URL (optional for UPnP) -#manufacturer_url=http://www.example.com/ - -# Model Description (recommended for UPnP) -# Long description for end user. Should be less than 128 characters. -#model_description=Wireless Access Point - -# Model URL (optional for UPnP) -#model_url=http://www.example.com/model/ - -# Universal Product Code (optional for UPnP) -# 12-digit, all-numeric code that identifies the consumer package. -#upc=123456789012 - -##### Wi-Fi Direct (P2P) ###################################################### - -# Enable P2P Device management -#manage_p2p=1 - -# Allow cross connection -#allow_cross_connection=1 - -#### TDLS (IEEE 802.11z-2010) ################################################# - -# Prohibit use of TDLS in this BSS -#tdls_prohibit=1 - -# Prohibit use of TDLS Channel Switching in this BSS -#tdls_prohibit_chan_switch=1 - -##### IEEE 802.11v-2011 ####################################################### - -# Time advertisement -# 0 = disabled (default) -# 2 = UTC time at which the TSF timer is 0 -#time_advertisement=2 - -# Local time zone as specified in 8.3 of IEEE Std 1003.1-2004: -# stdoffset[dst[offset][,start[/time],end[/time]]] -#time_zone=EST5 - -##### IEEE 802.11u-2011 ####################################################### - -# Enable Interworking service -#interworking=1 - -# Access Network Type -# 0 = Private network -# 1 = Private network with guest access -# 2 = Chargeable public network -# 3 = Free public network -# 4 = Personal device network -# 5 = Emergency services only network -# 14 = Test or experimental -# 15 = Wildcard -#access_network_type=0 - -# Whether the network provides connectivity to the Internet -# 0 = Unspecified -# 1 = Network provides connectivity to the Internet -#internet=1 - -# Additional Step Required for Access -# Note: This is only used with open network, i.e., ASRA shall ne set to 0 if -# RSN is used. -#asra=0 - -# Emergency services reachable -#esr=0 - -# Unauthenticated emergency service accessible -#uesa=0 - -# Venue Info (optional) -# The available values are defined in IEEE Std 802.11u-2011, 7.3.1.34. -# Example values (group,type): -# 0,0 = Unspecified -# 1,7 = Convention Center -# 1,13 = Coffee Shop -# 2,0 = Unspecified Business -# 7,1 Private Residence -#venue_group=7 -#venue_type=1 - -# Homogeneous ESS identifier (optional; dot11HESSID) -# If set, this shall be identifical to one of the BSSIDs in the homogeneous -# ESS and this shall be set to the same value across all BSSs in homogeneous -# ESS. -#hessid=02:03:04:05:06:07 - -# Roaming Consortium List -# Arbitrary number of Roaming Consortium OIs can be configured with each line -# adding a new OI to the list. The first three entries are available through -# Beacon and Probe Response frames. Any additional entry will be available only -# through ANQP queries. Each OI is between 3 and 15 octets and is configured a -# a hexstring. -#roaming_consortium=021122 -#roaming_consortium=2233445566 - -##### Multiple BSSID support ################################################## -# -# Above configuration is using the default interface (wlan#, or multi-SSID VLAN -# interfaces). Other BSSIDs can be added by using separator 'bss' with -# default interface name to be allocated for the data packets of the new BSS. -# -# hostapd will generate BSSID mask based on the BSSIDs that are -# configured. hostapd will verify that dev_addr & MASK == dev_addr. If this is -# not the case, the MAC address of the radio must be changed before starting -# hostapd (ifconfig wlan0 hw ether <MAC addr>). If a BSSID is configured for -# every secondary BSS, this limitation is not applied at hostapd and other -# masks may be used if the driver supports them (e.g., swap the locally -# administered bit) -# -# BSSIDs are assigned in order to each BSS, unless an explicit BSSID is -# specified using the 'bssid' parameter. -# If an explicit BSSID is specified, it must be chosen such that it: -# - results in a valid MASK that covers it and the dev_addr -# - is not the same as the MAC address of the radio -# - is not the same as any other explicitly specified BSSID -# -# Please note that hostapd uses some of the values configured for the first BSS -# as the defaults for the following BSSes. However, it is recommended that all -# BSSes include explicit configuration of all relevant configuration items. -# -#bss=wlan0_0 -#ssid=test2 -# most of the above items can be used here (apart from radio interface specific -# items, like channel) - -#bss=wlan0_1 -#bssid=00:13:10:95:fe:0b -# ... diff --git a/testing/tests/tnc/tnccs-11-supplicant/posttest.dat b/testing/tests/tnc/tnccs-11-supplicant/posttest.dat deleted file mode 100644 index b55e0457c..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/posttest.dat +++ /dev/null @@ -1,5 +0,0 @@ -carol::killall wpa_supplicant -dave::killall wpa_supplicant -moon::killall hostapd -alice::killall radiusd -alice::rm /etc/freeradius/sites-enabled/inner-tunnel-second diff --git a/testing/tests/tnc/tnccs-11-supplicant/pretest.dat b/testing/tests/tnc/tnccs-11-supplicant/pretest.dat deleted file mode 100644 index 4dbff64a3..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/pretest.dat +++ /dev/null @@ -1,11 +0,0 @@ -alice::ln -s /etc/freeradius/sites-available/inner-tunnel-second /etc/freeradius/sites-enabled/inner-tunnel-second -alice::cat /etc/freeradius/sites-enabled/inner-tunnel-second -alice::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties radiusd -alice::cat /etc/tnc_config -carol::cat /etc/tnc_config -dave::cat /etc/tnc_config -moon::hostapd -B /etc/hostapd/hostapd.conf -carol::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties wpa_supplicant -B -c /etc/wpa_supplicant.conf -D wired -i eth0 -carol::sleep 4 -dave::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties wpa_supplicant -B -c /etc/wpa_supplicant.conf -D wired -i eth0 -dave::sleep 4 diff --git a/testing/tests/tnc/tnccs-11-supplicant/test.conf b/testing/tests/tnc/tnccs-11-supplicant/test.conf deleted file mode 100644 index 2069e4aa5..000000000 --- a/testing/tests/tnc/tnccs-11-supplicant/test.conf +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/bash -# -# This configuration file provides information on the -# guest instances used for this test - -# All guest instances that are required for this test -# -VIRTHOSTS="alice venus moon carol winnetou dave" - -# Corresponding block diagram -# -DIAGRAM="a-v-m-c-w-d.png" - -# Guest instances on which tcpdump is to be started -# -TCPDUMPHOSTS= - -# Guest instances on which IPsec is started -# Used for IPsec logging purposes -# -IPSECHOSTS="carol dave" - -# Guest instances on which FreeRadius is started -# -RADIUSHOSTS="alice" - -# charon controlled by swanctl -# -SWANCTL=1 diff --git a/testing/tests/tnc/tnccs-20-ev-pt-tls/hosts/carol/etc/pts/collector.sql b/testing/tests/tnc/tnccs-20-ev-pt-tls/hosts/carol/etc/pts/collector.sql new file mode 100644 index 000000000..548c101e4 --- /dev/null +++ b/testing/tests/tnc/tnccs-20-ev-pt-tls/hosts/carol/etc/pts/collector.sql @@ -0,0 +1,39 @@ +/* SW Identifiers */ + +INSERT INTO sw_identifiers ( + name, package, version, source, installed +) VALUES ( + 'strongswan.org__Debian_DEBIAN_VERSION-x86_64-libutempter0-1.1.5', 'libutempter0', '1.1.5', 1, 0 +); + +INSERT INTO sw_identifiers ( + name, package, version, source, installed +) VALUES ( + 'strongswan.org__Debian_DEBIAN_VERSION-x86_64-libevent-2.0-5-2.0.20', 'libevent-2.0-5', '2.0.20', 1, 0 +); + +INSERT INTO sw_identifiers ( + name, package, version, source, installed +) VALUES ( + 'strongswan.org__Debian_DEBIAN_VERSION-x86_64-tmux-2.2', 'tmux', '2.2', 1, 0 +); + +/* SW Events */ + +INSERT INTO sw_events ( + eid, sw_id, action +) VALUES ( + 2, 1, 2 +); + +INSERT INTO sw_events ( + eid, sw_id, action +) VALUES ( + 2, 2, 2 +); + +INSERT INTO sw_events ( + eid, sw_id, action +) VALUES ( + 2, 3, 2 +); diff --git a/testing/tests/tnc/tnccs-20-ev-pt-tls/posttest.dat b/testing/tests/tnc/tnccs-20-ev-pt-tls/posttest.dat index c0049d7fd..5d0602c15 100644 --- a/testing/tests/tnc/tnccs-20-ev-pt-tls/posttest.dat +++ b/testing/tests/tnc/tnccs-20-ev-pt-tls/posttest.dat @@ -1,6 +1,7 @@ carol::ip route del 10.1.0.0/16 via 192.168.0.1 dave::ip route del 10.1.0.0/16 via 192.168.0.1 winnetou::ip route del 10.1.0.0/16 via 192.168.0.1 +carol::rm /etc/pts/collector.sql alice::systemctl stop strongswan-swanctl alice::systemctl stop apache2 alice::rm /etc/swanctl/rsa/aaaKey.pem diff --git a/testing/tests/tnc/tnccs-20-fhh/description.txt b/testing/tests/tnc/tnccs-20-fhh/description.txt deleted file mode 100644 index 8bf1543d2..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/description.txt +++ /dev/null @@ -1,13 +0,0 @@ -The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b> -using EAP-TTLS authentication only with the gateway presenting a server certificate and -the clients doing EAP-MD5 password-based authentication. -In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the -health of <b>carol</b> and <b>dave</b> via the <b>TNCCS 2.0 </b> client-server interface -compliant with <b>RFC 5793 PB-TNC</b>. The Dummy IMC and IMV from the -<a href="http://trust.f4.hs-hannover.de/projects/tncatfhh.html" target="popup"> -<b>TNC@FHH</b></a> project are used which communicate over a proprietary protocol. -<p> -<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements the -clients are connected by gateway <b>moon</b> to the "rw-allow" and "rw-isolate" subnets, -respectively. -</p> diff --git a/testing/tests/tnc/tnccs-20-fhh/evaltest.dat b/testing/tests/tnc/tnccs-20-fhh/evaltest.dat deleted file mode 100644 index bf0732604..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/evaltest.dat +++ /dev/null @@ -1,18 +0,0 @@ -carol::cat /var/log/daemon.log::PB-TNC access recommendation is.*Access Allowed::YES -carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established::YES -carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP successful::YES -dave:: cat /var/log/daemon.log::PB-TNC access recommendation is.*Quarantined::YES -dave:: cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established::YES -dave:: cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP successful::YES -moon:: cat /var/log/daemon.log::added group membership 'allow'::YES -moon:: cat /var/log/daemon.log::authentication of 'carol@strongswan.org' with EAP successful::YES -moon:: cat /var/log/daemon.log::added group membership 'isolate'::YES -moon:: cat /var/log/daemon.log::authentication of 'dave@strongswan.org' with EAP successful::YES -carol::swanctl --list-sas --raw 2> /dev/null::home.*version=2 state=ESTABLISHED local-host=192.168.0.100 local-port=4500 local-id=carol@strongswan.org remote-host=192.168.0.1 remote-port=4500 remote-id=moon.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*home.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[192.168.0.100/32] remote-ts=\[10.1.0.0/28]::YES -dave:: swanctl --list-sas --raw 2> /dev/null::home.*version=2 state=ESTABLISHED local-host=192.168.0.200 local-port=4500 local-id=dave@strongswan.org remote-host=192.168.0.1 remote-port=4500 remote-id=moon.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*home.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[192.168.0.200/32] remote-ts=\[10.1.0.16/28]::YES -moon:: swanctl --list-sas --ike-id 1 --raw 2> /dev/null::rw-allow.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=4500 local-id=moon.strongswan.org remote-host=192.168.0.100 remote-port=4500 remote-id=carol@strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*rw-allow.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[10.1.0.0/28] remote-ts=\[192.168.0.100/32]::YES -moon:: swanctl --list-sas --ike-id 2 --raw 2> /dev/null::rw-isolate.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-port=4500 local-id=moon.strongswan.org remote-host=192.168.0.200 remote-port=4500 remote-id=dave@strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=MODP_3072.*child-sas.*rw-isolate.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[10.1.0.16/28] remote-ts=\[192.168.0.200/32]::YES -carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_.eq=1::YES -carol::ping -c 1 -W 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_.eq=1::NO -dave:: ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_.eq=1::YES -dave:: ping -c 1 -W 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_.eq=1::NO diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/init.d/charon b/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/init.d/charon deleted file mode 100755 index bf3a6891a..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/init.d/charon +++ /dev/null @@ -1,158 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: charon -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: strongSwan charon IKE daemon -# Description: with swanctl the strongSwan charon daemon must be -# running in the background -### END INIT INFO - -# Author: Andreas Steffen <andreas.steffen@strongswa.org> -# -# Do NOT "set -e" - -# PATH should only include /usr/* if it runs after the mountnfs.sh script -PATH=/sbin:/usr/sbin:/usr/local/sbin:/bin:/usr/bin -DESC="strongSwan charon IKE daemon" -NAME=charon -DAEMON=/usr/local/libexec/ipsec/$NAME -DAEMON_ARGS="" -PIDFILE=/var/run/$NAME.pid -SCRIPTNAME=/etc/init.d/charon - -export LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties - -# Exit if the package is not installed -[ -x "$DAEMON" ] || exit 0 - -# Read configuration variable file if it is present -[ -r /etc/default/$NAME ] && . /etc/default/$NAME - -# Load the VERBOSE setting and other rcS variables -. /lib/init/vars.sh - -# Define LSB log_* functions. -# Depend on lsb-base (>= 3.2-14) to ensure that this file is present -# and status_of_proc is working. -. /lib/lsb/init-functions - -# -# Function that starts the daemon/service -# -do_start() -{ - # Return - # 0 if daemon has been started - # 1 if daemon was already running - # 2 if daemon could not be started - start-stop-daemon --start --quiet --background --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ - || return 1 - start-stop-daemon --start --quiet --background --pidfile $PIDFILE --exec $DAEMON -- \ - $DAEMON_ARGS \ - || return 2 - # Add code here, if necessary, that waits for the process to be ready - # to handle requests from services started subsequently which depend - # on this one. As a last resort, sleep for some time. -} - -# -# Function that stops the daemon/service -# -do_stop() -{ - # Return - # 0 if daemon has been stopped - # 1 if daemon was already stopped - # 2 if daemon could not be stopped - # other if a failure occurred - start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME - RETVAL="$?" - [ "$RETVAL" = 2 ] && return 2 - # Wait for children to finish too if this is a daemon that forks - # and if the daemon is only ever run from this initscript. - # If the above conditions are not satisfied then add some other code - # that waits for the process to drop all resources that could be - # needed by services started subsequently. A last resort is to - # sleep for some time. - start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON - [ "$?" = 2 ] && return 2 - # Many daemons don't delete their pidfiles when they exit. - rm -f $PIDFILE - return "$RETVAL" -} - -# -# Function that sends a SIGHUP to the daemon/service -# -do_reload() { - # - # If the daemon can reload its configuration without - # restarting (for example, when it is sent a SIGHUP), - # then implement that here. - # - start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME - return 0 -} - -case "$1" in - start) - [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" - do_start - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - stop) - [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" - do_stop - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - status) - status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? - ;; - #reload|force-reload) - # - # If do_reload() is not implemented then leave this commented out - # and leave 'force-reload' as an alias for 'restart'. - # - #log_daemon_msg "Reloading $DESC" "$NAME" - #do_reload - #log_end_msg $? - #;; - restart|force-reload) - # - # If the "reload" option is implemented then remove the - # 'force-reload' alias - # - log_daemon_msg "Restarting $DESC" "$NAME" - do_stop - case "$?" in - 0|1) - do_start - case "$?" in - 0) log_end_msg 0 ;; - 1) log_end_msg 1 ;; # Old process is still running - *) log_end_msg 1 ;; # Failed to start - esac - ;; - *) - # Failed to stop - log_end_msg 1 - ;; - esac - ;; - *) - #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 - echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 - exit 3 - ;; -esac - -: diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/strongswan.conf b/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/strongswan.conf deleted file mode 100644 index aa4934fb1..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/strongswan.conf +++ /dev/null @@ -1,18 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce aes sha1 sha2 md5 pem pkcs1 gmp hmac x509 revocation curl vici kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnc-tnccs tnccs-20 updown - - multiple_authentication = no - - syslog { - daemon { - tnc = 3 - imc = 2 - } - } -} - -libtls { - suites = TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 -} diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/swanctl/swanctl.conf deleted file mode 100644 index 0f266dd93..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,35 +0,0 @@ -connections { - - home { - local_addrs = 192.168.0.100 - remote_addrs = 192.168.0.1 - - local { - auth = eap-ttls - id = carol@strongswan.org - } - remote { - auth = eap-ttls - id = moon.strongswan.org - } - children { - home { - remote_ts = 10.1.0.0/16 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-modp3072 - } -} - -secrets { - - eap { - id = carol@strongswan.org - secret = "Ar3etTnp" - } -} diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/tnc/dummyimc.file b/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/tnc/dummyimc.file deleted file mode 100644 index f5da834c0..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/tnc/dummyimc.file +++ /dev/null @@ -1 +0,0 @@ -allow diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/tnc/log4cxx.properties b/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/tnc/log4cxx.properties deleted file mode 100644 index b1c694107..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/tnc/log4cxx.properties +++ /dev/null @@ -1,15 +0,0 @@ -# Set root logger level to DEBUG and its appenders to A1 and A2. -log4j.rootLogger=DEBUG, A1, A2 - -# A1 is set to be a ConsoleAppender. -log4j.appender.A1=org.apache.log4j.ConsoleAppender -log4j.appender.A1.layout=org.apache.log4j.PatternLayout -log4j.appender.A1.layout.ConversionPattern=--[IMC] %m%n - -# A2 is set to be a SyslogAppender -log4j.appender.A2=org.apache.log4j.net.SyslogAppender -log4j.appender.A2.Facility=DAEMON -log4j.appender.A2.SyslogHost=localhost -log4j.appender.A2.Threshold=DEBUG -log4j.appender.A2.layout=org.apache.log4j.PatternLayout -log4j.appender.A2.layout.ConversionPattern=--[IMC] %m%n diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/tnc_config b/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/tnc_config deleted file mode 100644 index 3ef780933..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/carol/etc/tnc_config +++ /dev/null @@ -1,3 +0,0 @@ -#IMC configuration file for strongSwan client - -IMC "Dummy" /usr/local/lib/libdummyimc.so diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/init.d/charon b/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/init.d/charon deleted file mode 100755 index bf3a6891a..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/init.d/charon +++ /dev/null @@ -1,158 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: charon -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: strongSwan charon IKE daemon -# Description: with swanctl the strongSwan charon daemon must be -# running in the background -### END INIT INFO - -# Author: Andreas Steffen <andreas.steffen@strongswa.org> -# -# Do NOT "set -e" - -# PATH should only include /usr/* if it runs after the mountnfs.sh script -PATH=/sbin:/usr/sbin:/usr/local/sbin:/bin:/usr/bin -DESC="strongSwan charon IKE daemon" -NAME=charon -DAEMON=/usr/local/libexec/ipsec/$NAME -DAEMON_ARGS="" -PIDFILE=/var/run/$NAME.pid -SCRIPTNAME=/etc/init.d/charon - -export LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties - -# Exit if the package is not installed -[ -x "$DAEMON" ] || exit 0 - -# Read configuration variable file if it is present -[ -r /etc/default/$NAME ] && . /etc/default/$NAME - -# Load the VERBOSE setting and other rcS variables -. /lib/init/vars.sh - -# Define LSB log_* functions. -# Depend on lsb-base (>= 3.2-14) to ensure that this file is present -# and status_of_proc is working. -. /lib/lsb/init-functions - -# -# Function that starts the daemon/service -# -do_start() -{ - # Return - # 0 if daemon has been started - # 1 if daemon was already running - # 2 if daemon could not be started - start-stop-daemon --start --quiet --background --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ - || return 1 - start-stop-daemon --start --quiet --background --pidfile $PIDFILE --exec $DAEMON -- \ - $DAEMON_ARGS \ - || return 2 - # Add code here, if necessary, that waits for the process to be ready - # to handle requests from services started subsequently which depend - # on this one. As a last resort, sleep for some time. -} - -# -# Function that stops the daemon/service -# -do_stop() -{ - # Return - # 0 if daemon has been stopped - # 1 if daemon was already stopped - # 2 if daemon could not be stopped - # other if a failure occurred - start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME - RETVAL="$?" - [ "$RETVAL" = 2 ] && return 2 - # Wait for children to finish too if this is a daemon that forks - # and if the daemon is only ever run from this initscript. - # If the above conditions are not satisfied then add some other code - # that waits for the process to drop all resources that could be - # needed by services started subsequently. A last resort is to - # sleep for some time. - start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON - [ "$?" = 2 ] && return 2 - # Many daemons don't delete their pidfiles when they exit. - rm -f $PIDFILE - return "$RETVAL" -} - -# -# Function that sends a SIGHUP to the daemon/service -# -do_reload() { - # - # If the daemon can reload its configuration without - # restarting (for example, when it is sent a SIGHUP), - # then implement that here. - # - start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME - return 0 -} - -case "$1" in - start) - [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" - do_start - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - stop) - [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" - do_stop - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - status) - status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? - ;; - #reload|force-reload) - # - # If do_reload() is not implemented then leave this commented out - # and leave 'force-reload' as an alias for 'restart'. - # - #log_daemon_msg "Reloading $DESC" "$NAME" - #do_reload - #log_end_msg $? - #;; - restart|force-reload) - # - # If the "reload" option is implemented then remove the - # 'force-reload' alias - # - log_daemon_msg "Restarting $DESC" "$NAME" - do_stop - case "$?" in - 0|1) - do_start - case "$?" in - 0) log_end_msg 0 ;; - 1) log_end_msg 1 ;; # Old process is still running - *) log_end_msg 1 ;; # Failed to start - esac - ;; - *) - # Failed to stop - log_end_msg 1 - ;; - esac - ;; - *) - #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 - echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 - exit 3 - ;; -esac - -: diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/strongswan.conf b/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/strongswan.conf deleted file mode 100644 index 8fc1c8729..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/strongswan.conf +++ /dev/null @@ -1,17 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce aes sha1 sha2 md5 pem pkcs1 gmp hmac x509 revocation curl vici kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnc-tnccs tnccs-20 updown - - multiple_authentication = no - syslog { - daemon { - tnc = 3 - imc = 2 - } - } -} - -libtls { - suites = TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 -} diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/swanctl/swanctl.conf deleted file mode 100644 index 989ab88c7..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,35 +0,0 @@ -connections { - - home { - local_addrs = 192.168.0.200 - remote_addrs = 192.168.0.1 - - local { - auth = eap-ttls - id = dave@strongswan.org - } - remote { - auth = eap-ttls - id = moon.strongswan.org - } - children { - home { - remote_ts = 10.1.0.0/16 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-modp3072 - } -} - -secrets { - - eap { - id = dave@strongswan.org - secret = "W7R0g3do" - } -} diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/tnc/dummyimc.file b/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/tnc/dummyimc.file deleted file mode 100644 index c20b5e57f..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/tnc/dummyimc.file +++ /dev/null @@ -1 +0,0 @@ -isolate
\ No newline at end of file diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/tnc/log4cxx.properties b/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/tnc/log4cxx.properties deleted file mode 100644 index b1c694107..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/tnc/log4cxx.properties +++ /dev/null @@ -1,15 +0,0 @@ -# Set root logger level to DEBUG and its appenders to A1 and A2. -log4j.rootLogger=DEBUG, A1, A2 - -# A1 is set to be a ConsoleAppender. -log4j.appender.A1=org.apache.log4j.ConsoleAppender -log4j.appender.A1.layout=org.apache.log4j.PatternLayout -log4j.appender.A1.layout.ConversionPattern=--[IMC] %m%n - -# A2 is set to be a SyslogAppender -log4j.appender.A2=org.apache.log4j.net.SyslogAppender -log4j.appender.A2.Facility=DAEMON -log4j.appender.A2.SyslogHost=localhost -log4j.appender.A2.Threshold=DEBUG -log4j.appender.A2.layout=org.apache.log4j.PatternLayout -log4j.appender.A2.layout.ConversionPattern=--[IMC] %m%n diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/tnc_config b/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/tnc_config deleted file mode 100644 index 8eee8068a..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/dave/etc/tnc_config +++ /dev/null @@ -1,3 +0,0 @@ -#IMC configuration file for strongSwan client - -IMC "Dummy" /usr/local/lib/libdummyimc.so diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/init.d/charon b/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/init.d/charon deleted file mode 100755 index bf3a6891a..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/init.d/charon +++ /dev/null @@ -1,158 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: charon -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: strongSwan charon IKE daemon -# Description: with swanctl the strongSwan charon daemon must be -# running in the background -### END INIT INFO - -# Author: Andreas Steffen <andreas.steffen@strongswa.org> -# -# Do NOT "set -e" - -# PATH should only include /usr/* if it runs after the mountnfs.sh script -PATH=/sbin:/usr/sbin:/usr/local/sbin:/bin:/usr/bin -DESC="strongSwan charon IKE daemon" -NAME=charon -DAEMON=/usr/local/libexec/ipsec/$NAME -DAEMON_ARGS="" -PIDFILE=/var/run/$NAME.pid -SCRIPTNAME=/etc/init.d/charon - -export LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties - -# Exit if the package is not installed -[ -x "$DAEMON" ] || exit 0 - -# Read configuration variable file if it is present -[ -r /etc/default/$NAME ] && . /etc/default/$NAME - -# Load the VERBOSE setting and other rcS variables -. /lib/init/vars.sh - -# Define LSB log_* functions. -# Depend on lsb-base (>= 3.2-14) to ensure that this file is present -# and status_of_proc is working. -. /lib/lsb/init-functions - -# -# Function that starts the daemon/service -# -do_start() -{ - # Return - # 0 if daemon has been started - # 1 if daemon was already running - # 2 if daemon could not be started - start-stop-daemon --start --quiet --background --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ - || return 1 - start-stop-daemon --start --quiet --background --pidfile $PIDFILE --exec $DAEMON -- \ - $DAEMON_ARGS \ - || return 2 - # Add code here, if necessary, that waits for the process to be ready - # to handle requests from services started subsequently which depend - # on this one. As a last resort, sleep for some time. -} - -# -# Function that stops the daemon/service -# -do_stop() -{ - # Return - # 0 if daemon has been stopped - # 1 if daemon was already stopped - # 2 if daemon could not be stopped - # other if a failure occurred - start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME - RETVAL="$?" - [ "$RETVAL" = 2 ] && return 2 - # Wait for children to finish too if this is a daemon that forks - # and if the daemon is only ever run from this initscript. - # If the above conditions are not satisfied then add some other code - # that waits for the process to drop all resources that could be - # needed by services started subsequently. A last resort is to - # sleep for some time. - start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON - [ "$?" = 2 ] && return 2 - # Many daemons don't delete their pidfiles when they exit. - rm -f $PIDFILE - return "$RETVAL" -} - -# -# Function that sends a SIGHUP to the daemon/service -# -do_reload() { - # - # If the daemon can reload its configuration without - # restarting (for example, when it is sent a SIGHUP), - # then implement that here. - # - start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME - return 0 -} - -case "$1" in - start) - [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" - do_start - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - stop) - [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" - do_stop - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - status) - status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? - ;; - #reload|force-reload) - # - # If do_reload() is not implemented then leave this commented out - # and leave 'force-reload' as an alias for 'restart'. - # - #log_daemon_msg "Reloading $DESC" "$NAME" - #do_reload - #log_end_msg $? - #;; - restart|force-reload) - # - # If the "reload" option is implemented then remove the - # 'force-reload' alias - # - log_daemon_msg "Restarting $DESC" "$NAME" - do_stop - case "$?" in - 0|1) - do_start - case "$?" in - 0) log_end_msg 0 ;; - 1) log_end_msg 1 ;; # Old process is still running - *) log_end_msg 1 ;; # Failed to start - esac - ;; - *) - # Failed to stop - log_end_msg 1 - ;; - esac - ;; - *) - #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 - echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 - exit 3 - ;; -esac - -: diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/strongswan.conf b/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/strongswan.conf deleted file mode 100644 index 4732fbd4b..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/strongswan.conf +++ /dev/null @@ -1,21 +0,0 @@ -# /etc/strongswan.conf - strongSwan configuration file - -charon-systemd { - load = random nonce aes sha1 sha2 md5 pem pkcs1 gmp hmac x509 revocation curl vici kernel-netlink socket-default eap-identity eap-ttls eap-md5 eap-tnc tnc-imv tnc-tnccs tnccs-20 updown - - multiple_authentication = no - - syslog { - daemon { - tnc = 3 - imv = 2 - } - } - plugins { - eap-ttls { - phase2_method = md5 - phase2_piggyback = yes - phase2_tnc = yes - } - } -} diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/swanctl/swanctl.conf b/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/swanctl/swanctl.conf deleted file mode 100644 index 1238c1a91..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/swanctl/swanctl.conf +++ /dev/null @@ -1,64 +0,0 @@ -connections { - - rw-allow { - local_addrs = 192.168.0.1 - - local { - auth = eap-ttls - id = moon.strongswan.org - } - remote { - auth = eap-ttls - id = *@strongswan.org - groups = allow - } - children { - rw-allow { - local_ts = 10.1.0.0/28 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-modp3072 - } - - rw-isolate { - local_addrs = 192.168.0.1 - - local { - auth = eap-ttls - id = moon.strongswan.org - } - remote { - auth = eap-ttls - id = *@strongswan.org - groups = isolate - } - children { - rw-isolate { - local_ts = 10.1.0.16/28 - - updown = /usr/local/libexec/ipsec/_updown iptables - esp_proposals = aes128gcm16-modp3072 - } - } - version = 2 - send_certreq = no - proposals = aes128-sha256-modp3072 - } -} - -secrets { - - eap-carol { - id = carol@strongswan.org - secret = "Ar3etTnp" - } - eap-dave { - id = dave@strongswan.org - secret = "W7R0g3do" - } -} diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/tnc/dummyimv.policy b/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/tnc/dummyimv.policy deleted file mode 100644 index d00491fd7..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/tnc/dummyimv.policy +++ /dev/null @@ -1 +0,0 @@ -1 diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/tnc/hostscannerimv.policy b/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/tnc/hostscannerimv.policy deleted file mode 100644 index d8215dd3c..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/tnc/hostscannerimv.policy +++ /dev/null @@ -1,40 +0,0 @@ -#FTP - File Transfer Protocol -TCP 20 = whatever -TCP 21 = close - -#SSH - Secure Shell -TCP 22 = whatever - -#Telnet -TCP 23 = close - -#E-Mail -# -#SMTP - Simple Mail Transfer Protocol -TCP 25 = close -TCP 587 = close -#POP3 - Post Office Protocol version 3 -TCP 110 = close -TCP 995 = close - -#DNS - Domain Name System -UDP 53 = close -TCP 53 = close - -#BOOTP/DHCP - Bootstrap Protocol / -#Dynamic Host Configuration Protocol -UDP 67 = close -#UDP 68 = open -UDP 68 = whatever - -#www - World Wide Web -#HTTP - Hypertext Transfer Protocol -TCP 80 = close -#HTTPS - Hypertext Transfer Protocol Secure -TCP 443 = close - -#examples -TCP 8080 = close -TCP 5223 = whatever -UDP 4444 = close -UDP 631 = whatever diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/tnc/log4cxx.properties b/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/tnc/log4cxx.properties deleted file mode 100644 index 122d798b3..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/tnc/log4cxx.properties +++ /dev/null @@ -1,15 +0,0 @@ -# Set root logger level to DEBUG and its appenders to A1 and A2. -log4j.rootLogger=DEBUG, A1, A2 - -# A1 is set to be a ConsoleAppender. -log4j.appender.A1=org.apache.log4j.ConsoleAppender -log4j.appender.A1.layout=org.apache.log4j.PatternLayout -log4j.appender.A1.layout.ConversionPattern=--[IMV] %m%n - -# A2 is set to be a SyslogAppender -log4j.appender.A2=org.apache.log4j.net.SyslogAppender -log4j.appender.A2.Facility=DAEMON -log4j.appender.A2.SyslogHost=localhost -log4j.appender.A2.Threshold=DEBUG -log4j.appender.A2.layout=org.apache.log4j.PatternLayout -log4j.appender.A2.layout.ConversionPattern=--[IMV] %m%n diff --git a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/tnc_config b/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/tnc_config deleted file mode 100644 index fa4324e38..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/hosts/moon/etc/tnc_config +++ /dev/null @@ -1,3 +0,0 @@ -#IMV configuration file for strongSwan server - -IMV "Dummy" /usr/local/lib/libdummyimv.so diff --git a/testing/tests/tnc/tnccs-20-fhh/posttest.dat b/testing/tests/tnc/tnccs-20-fhh/posttest.dat deleted file mode 100644 index 199873ba1..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/posttest.dat +++ /dev/null @@ -1,6 +0,0 @@ -carol::systemctl stop strongswan-swanctl -dave::systemctl stop strongswan-swanctl -moon::systemctl stop strongswan-swanctl -moon::iptables-restore < /etc/iptables.flush -carol::iptables-restore < /etc/iptables.flush -dave::iptables-restore < /etc/iptables.flush diff --git a/testing/tests/tnc/tnccs-20-fhh/pretest.dat b/testing/tests/tnc/tnccs-20-fhh/pretest.dat deleted file mode 100644 index 79340af29..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/pretest.dat +++ /dev/null @@ -1,20 +0,0 @@ -moon::iptables-restore < /etc/iptables.rules -carol::iptables-restore < /etc/iptables.rules -dave::iptables-restore < /etc/iptables.rules -moon::cat /etc/tnc_config -carol::cat /etc/tnc_config -dave::cat /etc/tnc_config -carol::cat /etc/tnc/dummyimc.file -dave::cat /etc/tnc/dummyimc.file -carol::rm /etc/swanctl/rsa/* -dave::rm /etc/swanctl/rsa/* -carol::rm /etc/swanctl/x509/* -dave::rm /etc/swanctl/x509/* -moon::systemctl start strongswan-swanctl -carol::systemctl start strongswan-swanctl -dave::systemctl start strongswan-swanctl -moon::expect-connection rw-allow -carol::expect-connection home -carol::swanctl --initiate --child home 2> /dev/null -dave::expect-connection home -dave::swanctl --initiate --child home 2> /dev/null diff --git a/testing/tests/tnc/tnccs-20-fhh/test.conf b/testing/tests/tnc/tnccs-20-fhh/test.conf deleted file mode 100644 index f6db73912..000000000 --- a/testing/tests/tnc/tnccs-20-fhh/test.conf +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/bash -# -# This configuration file provides information on the -# guest instances used for this test - -# All guest instances that are required for this test -# -VIRTHOSTS="alice venus moon carol winnetou dave" - -# Corresponding block diagram -# -DIAGRAM="a-v-m-c-w-d.png" - -# Guest instances on which tcpdump is to be started -# -TCPDUMPHOSTS="moon" - -# Guest instances on which IPsec is started -# Used for IPsec logging purposes -# -IPSECHOSTS="moon carol dave" - -# Guest instances on which FreeRadius is started -# -RADIUSHOSTS= - -# charon controlled by swanctl -# -SWANCTL=1 diff --git a/testing/tests/tnc/tnccs-20-pdp-eap/hosts/alice/etc/apache2/sites-available/000-default.conf b/testing/tests/tnc/tnccs-20-pdp-eap/hosts/alice/etc/apache2/sites-available/000-default.conf index 4075f75bd..cd5056e83 100644 --- a/testing/tests/tnc/tnccs-20-pdp-eap/hosts/alice/etc/apache2/sites-available/000-default.conf +++ b/testing/tests/tnc/tnccs-20-pdp-eap/hosts/alice/etc/apache2/sites-available/000-default.conf @@ -9,13 +9,7 @@ WSGIPythonPath /var/www/tnc <Directory /var/www/tnc/config> <Files wsgi.py> - <IfModule mod_authz_core.c> - Require all granted - </IfModule> - <IfModule !mod_authz_core.c> - Order deny,allow - Allow from all - </IfModule> + Require all granted </Files> </Directory> diff --git a/testing/tests/tnc/tnccs-20-pdp-eap/hosts/alice/etc/apache2/sites-available/default b/testing/tests/tnc/tnccs-20-pdp-eap/hosts/alice/etc/apache2/sites-available/default deleted file mode 100644 index 1dc8b5688..000000000 --- a/testing/tests/tnc/tnccs-20-pdp-eap/hosts/alice/etc/apache2/sites-available/default +++ /dev/null @@ -1 +0,0 @@ -Include sites-available/000-default.conf
\ No newline at end of file diff --git a/testing/tests/tnc/tnccs-20-pdp-pt-tls/hosts/alice/etc/apache2/sites-available/000-default.conf b/testing/tests/tnc/tnccs-20-pdp-pt-tls/hosts/alice/etc/apache2/sites-available/000-default.conf index 4075f75bd..cd5056e83 100644 --- a/testing/tests/tnc/tnccs-20-pdp-pt-tls/hosts/alice/etc/apache2/sites-available/000-default.conf +++ b/testing/tests/tnc/tnccs-20-pdp-pt-tls/hosts/alice/etc/apache2/sites-available/000-default.conf @@ -9,13 +9,7 @@ WSGIPythonPath /var/www/tnc <Directory /var/www/tnc/config> <Files wsgi.py> - <IfModule mod_authz_core.c> - Require all granted - </IfModule> - <IfModule !mod_authz_core.c> - Order deny,allow - Allow from all - </IfModule> + Require all granted </Files> </Directory> diff --git a/testing/tests/tnc/tnccs-20-pdp-pt-tls/hosts/alice/etc/apache2/sites-available/default b/testing/tests/tnc/tnccs-20-pdp-pt-tls/hosts/alice/etc/apache2/sites-available/default deleted file mode 100644 index 1dc8b5688..000000000 --- a/testing/tests/tnc/tnccs-20-pdp-pt-tls/hosts/alice/etc/apache2/sites-available/default +++ /dev/null @@ -1 +0,0 @@ -Include sites-available/000-default.conf
\ No newline at end of file |