From 42424656e873ad0da564131dbffb4b82ed3347c9 Mon Sep 17 00:00:00 2001 From: Rene Mayrhofer Date: Sat, 3 Jun 2006 23:37:13 +0000 Subject: Remove these files from the repository, because they get created during the build (and removed by make clean). --- doc/manpage.d/ipsec_setup.8.html | 237 --------------------------------------- 1 file changed, 237 deletions(-) delete mode 100644 doc/manpage.d/ipsec_setup.8.html (limited to 'doc/manpage.d/ipsec_setup.8.html') diff --git a/doc/manpage.d/ipsec_setup.8.html b/doc/manpage.d/ipsec_setup.8.html deleted file mode 100644 index 7197e2b18..000000000 --- a/doc/manpage.d/ipsec_setup.8.html +++ /dev/null @@ -1,237 +0,0 @@ -Content-type: text/html - -Manpage of IPSEC_SETUP - -

IPSEC_SETUP

-Section: Maintenance Commands (8)
Updated: 23 July 2001
Index -Return to Main Contents
- - -  -

NAME

- -ipsec setup - control IPsec subsystem -  -

SYNOPSIS

- -ipsec - -setup - -[ ---show - -| ---showonly - -] -command -  -

DESCRIPTION

- -Setup - -controls the FreeS/WAN IPsec subsystem, -including both the Klips kernel code and the Pluto key-negotiation daemon. -(It is a synonym for the ``rc'' script for the subsystem; -the system runs the equivalent of -ipsec setup start - -at boot time, -and -ipsec setup stop - -at shutdown time, more or less.) -

- -The action taken depends on the specific -command, - -and on the contents of the -config - -setup - -section of the -IPsec configuration file (/etc/ipsec.conf, - -see -ipsec.conf(5)). - -Current -commands - -are: -

-
start - -
-start Klips and Pluto, -including setting up Klips to do crypto operations on the -interface(s) specified in the configuration file, -and (if the configuration file so specifies) -setting up manually-keyed connections and/or -asking Pluto to negotiate automatically-keyed connections -to other security gateways -
stop - -
-shut down Klips and Pluto, -including tearing down all existing crypto connections -
restart - -
-equivalent to -stop - -followed by -start - -
status - -
-report the status of the subsystem; -normally just reports -IPsec running - -and -pluto pid nnn, - -or -IPsec stopped, - -and exits with status 0, -but will go into more detail (and exit with status 1) -if something strange is found. -(An ``illicit'' Pluto is one that does not match the process ID in -Pluto's lock file; -an ``orphaned'' Pluto is one with no lock file.) -
-

- -The -stop - -operation tries to clean up properly even if assorted accidents -have occurred, -e.g. Pluto having died without removing its lock file. -If -stop - -discovers that the subsystem is (supposedly) not running, -it will complain, -but will do its cleanup anyway before exiting with status 1. -

- -Although a number of configuration-file parameters influence -setup's - -operations, the key one is the -interfaces - -parameter, which must be right or chaos will ensue. -

- -The ---show - -and ---showonly - -options cause -setup - -to display the shell commands that it would execute. ---showonly - -suppresses their execution. -Only -start, - -stop, - -and -restart - -commands recognize these flags. -  -

FILES

- - - -/etc/rc.d/init.d/ipsec         the script itself
-
- -/etc/init.d/ipsec             alternate location for the script
-
- -/etc/ipsec.conf               IPsec configuration file
-
- -/proc/sys/net/ipv4/ip_forward forwarding control
-
- -/var/run/ipsec.info           saved information
-
- -/var/run/pluto.pid            Pluto lock file
-
- -/var/run/ipsec_setup.pid      IPsec lock file
-  -

SEE ALSO

- -ipsec.conf(5), ipsec(8), ipsec_manual(8), ipsec_auto(8), route(8) -  -

DIAGNOSTICS

- -All output from the commands -start - -and -stop - -goes both to standard -output and to -syslogd(8), - -via -logger(1). - -Selected additional information is logged only to -syslogd(8). - -  -

HISTORY

- -Written for the FreeS/WAN project -<http://www.freeswan.org> -by Henry Spencer. -  -

BUGS

- -Old versions of -logger(1) - -inject spurious extra newlines onto standard output. -

- -

- 

Index

-
-
NAME
-
SYNOPSIS
-
DESCRIPTION
-
FILES
-
SEE ALSO
-
DIAGNOSTICS
-
HISTORY
-
BUGS
-
-
-This document was created by -man2html, -using the manual pages.
-Time: 21:40:18 GMT, November 11, 2003 - - -- cgit v1.2.3