# FreeS/WAN pathnames and other master configuration # Copyright (C) 2001, 2002 Henry Spencer. # # This program is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by the # Free Software Foundation; either version 2 of the License, or (at your # option) any later version. See . # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License # for more details. # # RCSID $Id: Makefile.inc,v 1.14 2007/01/29 08:19:56 as Exp $ # Variables in this file with names starting with INC_ are not for use # by Makefiles which include it; they are subject to change without warning. # # "Final" and "finally" refer to where the files will end up on the # running IPsec system, as opposed to where they get installed by our # Makefiles. (The two are different for cross-compiles and the like, # where our Makefiles are not the end of the installation process.) # Paths with FINAL in their names are the only ones that the installed # software itself depends on. (Very few things should know about the # FINAL paths; think twice and consult Henry before making something new # depend on them.) All other paths are install targets. # See also DESTDIR, below. ### boilerplate, do not change SHELL=/bin/sh ### paths within the source tree KLIPSINC=${FREESWANSRCDIR}/linux/include KLIPSSRC=${FREESWANSRCDIR}/linux/net/ipsec LIBFREESWANDIR=${FREESWANSRCDIR}/linux/lib/libfreeswan FREESWANLIB=${FREESWANSRCDIR}/lib/libfreeswan/libfreeswan.a LWRESDIR=${FREESWANSRCDIR}/lib/liblwres LWRESLIB=${LWRESDIR}/liblwres.a LIBDESSRCDIR=${FREESWANSRCDIR}/linux/crypto/ciphers/des LIBDESLITE=${FREESWANSRCDIR}/lib/libdes/libdes.a LIBPOLICYDIR=${FREESWANSRCDIR}/linux/lib/libipsecpolicy POLICYLIB=${FREESWANSRCDIR}/lib/libipsecpolicy/libipsecpolicy.a .PHONY: programs checkprograms clean ### install pathnames # DESTDIR can be used to supply a prefix to all install targets. # (Note that "final" pathnames, signifying where files will eventually # reside rather than where install puts them, are exempt from this.) # The prefixing is done in this file, so as to have central control over # it; DESTDIR itself should never appear in any other Makefile. DESTDIR?= # "local" part of tree, used in building other pathnames INC_USRLOCAL=/usr/local # PUBDIR is where the "ipsec" command goes; beware, many things define PATH # settings which are assumed to include it (or at least, to include *some* # copy of the "ipsec" command). PUBDIR=$(DESTDIR)$(INC_USRLOCAL)/sbin # BINDIR is where sub-commands get put, FINALBINDIR is where the "ipsec" # command will look for them when it is run. Also called LIBEXECDIR. FINALLIBEXECDIR=$(INC_USRLOCAL)/libexec/ipsec LIBEXECDIR=$(DESTDIR)$(FINALBINDIR) FINALBINDIR=${FINALLIBEXECDIR} BINDIR=${LIBEXECDIR} # SBINDIR is where the user interface command goes. FINALSBINDIR=$(INC_USRLOCAL)/sbin SBINDIR=$(DESTDIR)$(FINALSBINDIR) # libdir is where utility files go FINALLIBDIR=$(INC_USRLOCAL)/lib/ipsec LIBDIR=$(DESTDIR)$(FINALLIBDIR) # where the appropriate manpage tree is located # location within INC_USRLOCAL INC_MANDIR=man # the full pathname MANTREE=$(DESTDIR)$(INC_USRLOCAL)/$(INC_MANDIR) # all relevant subdirectories of MANTREE MANPLACES=man3 man5 man8 # where configuration files go FINALCONFFILE?=/etc/ipsec.conf CONFFILE=$(DESTDIR)$(FINALCONFFILE) FINALCONFDIR?=/etc CONFDIR=$(DESTDIR)$(FINALCONFDIR) FINALCONFDDIR?=${FINALCONFDIR}/ipsec.d CONFDDIR=$(DESTDIR)$(FINALCONFDDIR) # sample configuration files go into INC_DOCDIR?=share/doc FINALEXAMPLECONFDIR=${INC_USRLOCAL}/${INC_DOCDIR}/strongswan EXAMPLECONFDIR=${DESTDIR}${FINALEXAMPLECONFDIR} FINALDOCDIR?=${INC_USRLOCAL}/${INC_DOCDIR}/strongswan DOCDIR=${DESTDIR}${FINALDOCDIR} # where per-conn pluto logs go VARDIR?=/var LOGDIR?=${VARDIR}/log FINALLOGDIR?=${DESTDIR}${LOGDIR} # An attempt is made to automatically figure out where boot/shutdown scripts # will finally go: the first directory in INC_RCDIRS which exists gets them. # If none of those exists (or INC_RCDIRS is empty), INC_RCDEFAULT gets them. # With a non-null DESTDIR, INC_RCDEFAULT will be used unless one of the # INC_RCDIRS directories has been pre-created under DESTDIR. INC_RCDIRS=/etc/rc.d/init.d /etc/rc.d /etc/init.d /sbin/init.d INC_RCDEFAULT=/etc/rc.d/init.d # RCDIR is where boot/shutdown scripts go; FINALRCDIR is where they think # will finally be (so utils/Makefile can create a symlink in BINDIR to the # place where the boot/shutdown script will finally be, rather than the # place where it is installed). FINALRCDIR=$(shell for d in $(INC_RCDIRS) ; \ do if test -d $(DESTDIR)/$$d ; \ then echo $$d ; exit 0 ; \ fi ; done ; echo $(INC_RCDEFAULT) ) RCDIR=$(DESTDIR)$(FINALRCDIR) ### kernel pathnames # Kernel location: where patches are inserted, where kernel builds are done. # this is a hack using the wildcard to look for existence of a file/dir ifneq ($(wildcard /usr/src/linux-2.4),) KERNELSRC?=/usr/src/linux-2.4 else KERNELSRC?=/usr/src/linux endif # where kernel configuration outputs are located KCFILE=$(KERNELSRC)/.config ACFILE=$(KERNELSRC)/include/linux/autoconf.h VERFILE=$(KERNELSRC)/include/linux/version.h ### misc installation stuff # what program to use when installing things INSTALL=install # flags to the install program, for programs, manpages, and config files # -b has install make backups (n.b., unlinks original), --suffix controls # how backup names are composed. # Note that the install procedures will never overwrite an existing config # file, which is why -b is not specified for them. INSTBINFLAGS=-b --suffix=.old INSTMANFLAGS= INSTCONFFLAGS= ### misc configuration, included here in hopes that other files will not ### have to be changed for common customizations. # extra compile flags, for userland and kernel stuff, e.g. -g for debug info # (caution, this stuff is still being sorted out, will change in future) USERCOMPILE?=-g -O3 KLIPSCOMPILE=-O3 # command used to link/copy KLIPS into kernel source tree # There are good reasons why this is "ln -s"; only people like distribution # builders should ever change it. KLIPSLINK=ln -s -f # extra options for use in kernel build KERNMAKEOPTS= # kernel Makefile targets to be done before build # Can be overridden if you are *sure* your kernel doesn't need them. (2.2.xx # and later reportedly do not.) KERNDEP=dep KERNCLEAN=clean # kernel make name: zImage for 2.0.xx, bzImage for 2.2.xx and later, and # boot on non-x86s (what ever happened to standards?) INC_B=$(shell test -d $(DIRIN22) && echo b) KERNEL=$(shell if expr " `uname -m`" : ' i.86' >/dev/null ; \ then echo $(INC_B)zImage ; \ else echo boot ; \ fi) # temporary directory to be used when building RPMs, and where to put the # resulting RPM tree RPMKERNDIR := $(shell echo `pwd`/tmp.rpmkernel) RPMTMPDIR := $(shell echo `pwd`/tmp.rpmbuild) RPMDEST := $(shell echo `pwd`/rpms) # Newer versions of RPM do not permit building of packages with the "rpm" # command. For RedHat systems with older version of RPM, use: # RPMBUILD=rpm # instead. RPMBUILD=rpmbuild ### paths to resources on the host system # # Set this to a RedHat kernel-sources RPM. This normally extracts into # /usr/src/linux-2.4, but you might have extracted it elsewhere with # rpm2cpio. # RH_KERNELSRC?=/usr/src/linux-2.4 ## build environment variations ## # set this to a place where you have installed a bind9.3 # snapshot (20021115 or better). A bind 9.2, particularly a RedHat # installed one in RH 7.2, won't work - you wind up depending upon # openssl. BIND9STATICLIBDIR?=/usr/local/lib # FreeSWAN 3.x will require bind9. USE_LWRES?=false # whether or not to use iproute2 based commands. # USE_IPROUTE2?=true # what kind of firewalling to use: # 2.0 - ipfwadm # 2.2 - ipchains # 2.4 - iptables IPSEC_FIREWALLTYPE=iptables # include IKEPING in the distribution USE_IKEPING?=false # include support for KEY RR # this will become false in late 2003. USE_KEYRR?=true # include support for KERNEL 2.5/2.6 IPsec in pluto USE_KERNEL26?=true # whether or not pluto sends its strongSwan Vendor ID USE_VENDORID?=true # whether to tolerate some non-conformities (interoperability with Cisco VPN client) USE_CISCO_QUIRKS?=false # whether to support NAT Traversal (aka NAT-T) USE_NAT_TRAVERSAL?=true # whether to support NAT-T in transport mode (needed for Win2K NAT-T Interop) USE_NAT_TRAVERSAL_TRANSPORT_MODE?=false # include libcurl support (currently used for fetching CRLs, OCSP and SCEP) USE_LIBCURL?=false # include LDAP support (currently used for fetching CRLs) USE_LDAP?=false # uncomment this line if using the LDAPv3 protocol LDAP_VERSION=3 # uncomment this line if using the LDAPv2 protocol #LDAP_VERSION=2 # include PKCS11-based smartcard support USE_SMARTCARD?=false # Default PKCS11 library # Uncomment this line if using OpenSC <= 0.9.6 #PKCS11_DEFAULT_LIB=\"/usr/lib/pkcs11/opensc-pkcs11.so\" # Uncomment this line if using OpenSC >= 0.10.0 PKCS11_DEFAULT_LIB=\"/usr/lib/opensc-pkcs11.so\" # Uncomment and complete this line if using another default library #PKCS11_DEFAULT_LIB=\"/usr/lib/...\" # Uncomment if you want to specify a path to an XAUTH library module #XAUTH_DEFAULT_LIB= # Enable the leak detective to find memory leaks USE_LEAK_DETECTIVE?=false # set this to space where a linked/configured tree can be created by # preprhkern4module. Only needed if you are going to be created RPMs # outside of a distribution (as the FS team does for RedHat). #RH_KERNELSRC_POOL=/c2/freeswan/rh_kern # the following is a list of symbols which will be used to construct # the module goo to identify which module goes with each kernel. MODULE_GOO_LIST=irq_stat netif_rx register_sysctl_table send_sig MODULE_GOO_LIST+=kmalloc __kfree_skb __ip_select_ident alloc_skb MODULE_GOO_LIST+=icmp_send ip_fragment sock_register MODULE_DEF_INCLUDE=${FREESWANSRCDIR}/packaging/linus/config-all.h MODULE_DEFCONFIG?=${KLIPSSRC}/defconfig MODULE_FLAGS:=KLIPSMODULE=true TOPDIR=${KERNELSRC} -f ${MODULE_DEFCONFIG} -f Makefile # supply kernel-configuration ARCH defaults ifeq ($(ARCH),) ARCH := $(shell uname -m) endif # always sanitize $(ARCH) ARCH := $(shell echo $(ARCH) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/) # export everything so that scripts can use them. export LIBFREESWANDIR FREESWANSRCDIR FREESWANLIB -include ${FREESWANSRCDIR}/Makefile.ver # for emacs # # Local Variables: ;;; # mode: makefile ;;; # End Variables: ;;; #