---------------------------- strongSwan - Configuration ---------------------------- Contents -------- 1. Overview 2. Quickstart 2.1 Site-to-Site case 2.2 Host-to-Host case 2.3 Roadwarrior case 2.4 Roadwarrior case with virtual IP 3. Generating X.509 certificates and CRLs 3.1 Generating a CA certificate 3.2 Generating a host or user certificate 3.3 Generating a CRL 3.4 Revoking a certificate 4. Configuring the connections - ipsec.conf 4.1 Configuring my side 4.2 Multiple certificates 4.3 Configuring the peer side using CA certificates 4.4 Handling Virtual IPs and wildcard subnets 4.5 Protocol and port selectors 4.6 IPsec policies based on wildcards 4.7 IPsec policies based on CA certificates 5. Configuring certificates and CRLs 5.1 Installing CA certificates 5.2 Installing optional Certificate Revocation Lists (CRLs) 5.3 Dynamic update of certificates and CRLs 5.4 Local caching of CRLs 5.5 Online Certificate Status Protocol (OCSP) 5.6 CRL policy 5.7 Configuring the peer side using locally stored certificates 6. Configuring the private keys - ipsec.secrets 6.1 Loading private key files in PKCS#1 format 6.2 Entering passphrases interactively 6.3 Multiple private keys 7. Configuring CA properties - ipsec.conf 8. Monitoring functions 9. Firewall support functions 9.1 Environment variables in the updown script 9.2 Automatic insertion and deletion of iptables firewall rules 1. Overview -------- strongSwan is an OpenSource IPsec solution for Unix based operating systems. This document is just a short introduction, for more detailed information consult the manual pages and our wiki: http://wiki.strongswan.org 2. Quickstart ---------- In the following examples we assume for reasons of clarity that left designates the local host and that right is the remote host. Certificates for users, hosts and gateways are issued by a fictitious strongSwan CA. How to generate private keys and certificates using OpenSSL or the strongSwan PKI tool will be explained in section 3. The CA certificate "strongswanCert.pem" must be present on all VPN end points in order to be able to authenticate the peers. 2.1 Site-to-site case ----------------- In this scenario two security gateways moon and sun will connect the two subnets moon-net and sun-net with each other through a VPN tunnel set up between the two gateways: 10.1.0.0/16 -- | 192.168.0.1 | === | 192.168.0.2 | -- 10.2.0.0/16 moon-net moon sun sun-net Configuration on gateway moon: /etc/ipsec.d/cacerts/strongswanCert.pem /etc/ipsec.d/certs/moonCert.pem /etc/ipsec.secrets: : RSA moonKey.pem "" /etc/ipsec.conf: conn net-net leftsubnet=10.1.0.0/16 leftcert=moonCert.pem right=192.168.0.2 rightsubnet=10.2.0.0/16 rightid="C=CH, O=strongSwan, CN=sun.strongswan.org" auto=start Configuration on gateway sun: /etc/ipsec.d/cacerts/strongswanCert.pem /etc/ipsec.d/certs/sunCert.pem /etc/ipsec.secrets: : RSA sunKey.pem "" /etc/ipsec.conf: conn net-net leftsubnet=10.2.0.0/16 leftcert=sunCert.pem right=192.168.0.1 rightsubnet=10.1.0.0/16 rightid="C=CH, O=strongSwan, CN=moon.strongswan.org" auto=start 2.2 Host-to-host case ----------------- This is a setup between two single hosts which don't have a subnet behind them. Although IPsec transport mode would be sufficient for host-to-host connections we will use the default IPsec tunnel mode. | 192.168.0.1 | === | 192.168.0.2 | moon sun Configuration on host moon: /etc/ipsec.d/cacerts/strongswanCert.pem /etc/ipsec.d/certs/moonCert.pem /etc/ipsec.secrets: : RSA moonKey.pem "" /etc/ipsec.conf: conn host-host leftcert=moonCert.pem right=192.168.0.2 rightid="C=CH, O=strongSwan, CN=sun.strongswan.org" auto=start Configuration on host sun: /etc/ipsec.d/cacerts/strongswanCert.pem /etc/ipsec.d/certs/sunCert.pem /etc/ipsec.secrets: : RSA sunKey.pem "" /etc/ipsec.conf: conn host-host leftcert=sunCert.pem right=192.168.0.1 rightid="C=CH, O=strongSwan, CN=moon.strongswan.org" auto=start 2.3 Roadwarrior case ---------------- This is a very common case where a strongSwan gateway serves an arbitrary number of remote VPN clients usually having dynamic IP addresses. 10.1.0.0/16 -- | 192.168.0.1 | === | x.x.x.x | moon-net moon carol Configuration on gateway moon: /etc/ipsec.d/cacerts/strongswanCert.pem /etc/ipsec.d/certs/moonCert.pem /etc/ipsec.secrets: : RSA moonKey.pem "" /etc/ipsec.conf: conn rw leftsubnet=10.1.0.0/16 leftcert=moonCert.pem right=%any auto=add Configuration on roadwarrior carol: /etc/ipsec.d/cacerts/strongswanCert.pem /etc/ipsec.d/certs/carolCert.pem /etc/ipsec.secrets: : RSA carolKey.pem "" /etc/ipsec.conf: conn home leftcert=carolCert.pem right=192.168.0.1 rightsubnet=10.1.0.0/16 rightid="C=CH, O=strongSwan, CN=moon.strongswan.org" auto=start 2.6 Roadwarrior case with virtual IP -------------------------------- Roadwarriors usually have dynamic IP addresses assigned by the ISP they are currently attached to. In order to simplify the routing from moon-net back to the remote access client carol it would be desirable if the roadwarrior had an inner IP address chosen from a pre-assigned pool. 10.1.0.0/16 -- | 192.168.0.1 | === | x.x.x.x | -- 10.3.0.1 moon-net moon carol virtual IP In our example the virtual IP address is chosen from the address pool 10.3.0.0/16 which can be configured by adding the parameter rightsourceip=10.3.0.0/16 to the gateway's ipsec.conf. To request an IP address from this pool a roadwarrior can use IKEv1 mode config or IKEv2 configuration payloads. The configuration for both is the same leftsourceip=%config Configuration on gateway moon: /etc/ipsec.d/cacerts/strongswanCert.pem /etc/ipsec.d/certs/moonCert.pem /etc/ipsec.secrets: : RSA moonKey.pem "" /etc/ipsec.conf: conn rw leftsubnet=10.1.0.0/16 leftcert=moonCert.pem right=%any rightsourceip=10.3.0.0/16 auto=add Configuration on roadwarrior carol: /etc/ipsec.d/cacerts/strongswanCert.pem /etc/ipsec.d/certs/carolCert.pem /etc/ipsec.secrets: : RSA carolKey.pem "" /etc/ipsec.conf: conn home leftsourceip=%config leftcert=carolCert.pem right=192.168.0.1 rightsubnet=10.1.0.0/16 rightid="C=CH, O=strongSwan, CN=moon.strongswan.org" auto=start 3. Generating certificates and CRLs -------------------------------- This section is not a full-blown tutorial on how to use OpenSSL or the strongSwan PKI tool. It just lists a few points that are relevant if you want to generate your own certificates and CRLs for use with strongSwan. 3.1 Generating a CA certificate --------------------------- The OpenSSL statement openssl req -x509 -days 1460 -newkey rsa:4096 \ -keyout strongswanKey.pem -out strongswanCert.pem creates a 4096 bit RSA private key strongswanKey.pem and a self-signed CA certificate strongswanCert.pem with a validity of 4 years (1460 days). openssl x509 -in cert.pem -noout -text lists the properties of a X.509 certificate cert.pem. It allows you to verify whether the configuration defaults in openssl.cnf have been inserted correctly. If you prefer the CA certificate to be in binary DER format then the following command achieves this transformation: openssl x509 -in strongswanCert.pem -outform DER -out strongswanCert.der The statements ipsec pki --gen -s 4096 > strongswanKey.der ipsec pki --self --ca --lifetime 1460 --in strongswanKey.der \ --dn "C=CH, O=strongSwan, CN=strongSwan Root CA" \ > strongswanCert.der ipsec pki --print --in strongswanCert.der achieve about the same with the strongSwan PKI tool. Unlike OpenSSL the tool stores keys and certificates in the binary DER format by default. The --outform option may be used to write PEM encoded files. The directory /etc/ipsec.d/cacerts contains all required CA certificates either in binary DER or in base64 PEM format, irrespective of the file suffix the correct format will be determined. 3.2 Generating a host or user certificate ------------------------------------- The OpenSSL statement openssl req -newkey rsa:2048 -keyout hostKey.pem \ -out hostReq.pem generates a 2048 bit RSA private key hostKey.pem and a certificate request hostReq.pem which has to be signed by the CA. If you want to add a subjectAltName field to the host certificate you must edit the OpenSSL configuration file openssl.cnf and add the following line in the [ usr_cert ] section: subjectAltName=DNS:moon.strongswan.org if you want to identify the host by its Fully Qualified Domain Name (FQDN), or subjectAltName=IP:192.168.0.1 if you want the ID to be of type IPV4_ADDR. Of course you could include both ID types with subjectAltName=DNS:moon.strongswan.org,IP:192.168.0.1 but the use of an IP address for the identification of a host should be discouraged anyway. For user certificates the appropriate ID type is RFC822_ADDR which can be specified as subjectAltName=email:carol@strongswan.org or if the user's e-mail address is part of the subject's distinguished name subjectAltName=email:copy Now the certificate request can be signed by the CA with the command openssl ca -in hostReq.pem -days 730 -out hostCert.pem -notext If you omit the -days option then the default_days value (365 days) specified in openssl.cnf is used. The -notext option avoids that a human readable listing of the certificate is prepended to the base64 encoded certificate body. If you want to use the dynamic CRL fetching feature described in section 4.7 then you may include one or several crlDistributionPoints in your end certificates. This can be done in the [ usr_cert ] section of the openssl.cnf configuration file: crlDistributionPoints=@crl_dp [ crl_dp ] URI.1="http://crl.strongswan.org/strongswan.crl" URI.2="ldap://ldap.strongswan.org/cn=strongSwan Root CA, o=strongSwan, c=CH?certificateRevocationList" If you have only a single HTTP distribution point then the short form crlDistributionPoints="URI:http://crl.strongswan.org/strongswan.crl" also works. Again the statements ipsec pki --gen > moonKey.der ipsec pki --pub --in moonKey.der | ipsec pki --issue --lifetime 730 \ --cacert strongswanCert.der --cakey strongswanKey.der \ --dn "C=CH, O=strongSwan, CN=moon.strongswan.org" \ --san moon.strongswan.org --san 192.168.0.1 \ --crl http://crl.strongswan.org/strongswan.crl > moonCert.der do something thing similar using the strongSwan PKI tool. Usually, a Windows or Mac OS X (or iOS) based VPN client needs its private key, its host or user certificate, and the CA certificate. The most convenient way to load this information is to put everything into a PKCS#12 file: openssl pkcs12 -export -inkey carolKey.pem \ -in carolCert.pem -name "carol" \ -certfile strongswanCert.pem -caname "strongSwan Root CA" \ -out carolCert.p12 3.3 Generating a CRL ---------------- An empty CRL that is signed by the CA can be generated with the command openssl ca -gencrl -crldays 15 -out crl.pem If you omit the -crldays option then the default_crl_days value (30 days) specified in openssl.cnf is used. If you prefer the CRL to be in binary DER format then this conversion can be achieved with openssl crl -in crl.pem -outform DER -out cert.crl The strongSwan PKI tool provides the ipsec pki --signcrl command to sign CRLs. The directory /etc/ipsec.d/crls contains all CRLs either in binary DER or in base64 PEM format, irrespective of the file suffix the correct format will be determined. 3.4 Revoking a certificate ---------------------- A specific host certificate stored in the file host.pem is revoked with the command openssl ca -revoke host.pem Next the CRL file must be updated openssl ca -gencrl -crldays 60 -out crl.pem The content of the CRL file can be listed with the command openssl crl -in crl.pem -noout -text in the case of a base64 CRL, or alternatively for a CRL in DER format openssl crl -inform DER -in cert.crl -noout -text Again the ipsec pki --signcrl command may be used to create new CRLs containing additional certificates. 4. Configuring the connections - ipsec.conf ---------------------------------------- 4.1 Configuring my side ------------------- Usually the local side is the same for all connections. Therefore it makes sense to put the definitions characterizing the strongSwan security gateway into the conn %default section of the configuration file /etc/ipsec.conf. If we assume throughout this document that the strongSwan security gateway is left and the peer is right then we can write conn %default leftcert=moonCert.pem # load connection definitions automatically auto=add The X.509 certificate by which the strongSwan security gateway will authenticate itself by sending it in binary form to its peers as part of the Internet Key Exchange (IKE) is specified in the line leftcert=moonCert.pem The certificate can either be stored in base64 PEM-format or in the binary DER-format. Irrespective of the file suffix the correct format will be determined. Therefore leftcert=moonCert.der or leftcert=moonCert.cer would also be valid alternatives. When using relative pathnames as in the examples above, the certificate files must be stored in in the directory /etc/ipsec.d/certs. In order to distinguish strongSwan's own certificates from locally stored trusted peer certificates (see section 5.5 for details), they could also be stored in a subdirectory below /etc/ipsec.d/certs as e.g. in leftcert=mycerts/moonCert.pem Absolute pathnames are also possible as in leftcert=/usr/ssl/certs/moonCert.pem As an ID for the VPN gateway we recommend the use of a Fully Qualified Domain Name (FQDN) of the form conn rw right=%any leftid=@moon.strongswan.org Important: When a FQDN identifier is used it must be explicitly included as a so called subjectAltName of type dnsName (DNS:) in the certificate indicated by leftcert. For details on how to generate certificates with subjectAltNames, please refer to section 3.2. If you don't want to mess with subjectAltNames, you can use the certificate's Distinguished Name (DN) instead, which is an identifier of type DER_ASN1_DN and which can be written e.g. in the LDAP-type format conn rw right=%any leftid="C=CH, O=strongSwan, CN=moon.strongswan.org" Since the subject's DN is part of the certificate, the leftid does not have to be declared explicitly. Thus the entry conn rw right=%any automatically assumes the subject DN of leftcert to be the host ID. 4.2 Multiple certificates --------------------- strongSwan supports multiple local host certificates and corresponding RSA private keys: conn rw1 right=%any rightid=@peer1.domain1 leftcert=myCert1.pem # leftid is DN of myCert1 conn rw2 right=%any rightid=@peer2.domain2 leftcert=myCert2.pem # leftid is DN of myCert2 When peer1 initiates a connection then strongSwan will send myCert1 and will sign with myKey1 defined in /etc/ipsec.secrets (see section 6.2) whereas myCert2 and myKey2 will be used in a connection setup started from peer2. 4.3 Configuring the peer side using CA certificates ----------------------------------------------- Now we can proceed to define our connections. In many applications we might have dozens of road warriors connecting to a central strongSwan security gateway. The following most simple statement: conn rw right=%any defines the general roadwarrior case. The line right=%any literally means that any IPsec peer is accepted, regardless of its current IP source address and its ID, as long as the peer presents a valid X.509 certificate signed by a CA the strongSwan security gateway puts explicit trust in. Additionally, the signature during IKE gives proof that the peer is in possession of the private RSA key matching the public key contained in the transmitted certificate. The ID by which a peer is identifying itself during IKE can by any of the ID types IPV[46]_ADDR, FQDN, RFC822_ADDR or DER_ASN1_DN. If one of the first three ID types is used, then the accompanying X.509 certificate of the peer must contain a matching subjectAltName field of the type ipAddress (IP:), dnsName (DNS:) or rfc822Name (email:), respectively. With the fourth type DER_ASN1_DN the identifier must completely match the subject field of the peer's certificate. One of the two possible representations of a Distinguished Name (DN) is the LDAP-type format rightid="C=CH, O=strongSwan IPsec, CN=sun.strongswan.org" Additional whitespace can be added everywhere as desired since it will be automatically eliminated by the X.509 parser. An exception is the single whitespace between individual words, like e.g. in strongSwan IPsec, which is preserved by the parser. The Relative Distinguished Names (RDNs) can alternatively be separated by a slash '/' instead of a comma ',' rightid="/C=CH/O=strongSwan IPsec/CN=sun.strongswan.org" This is the representation extracted from the certificate by the OpenSSL command line option openssl x509 -in sunCert.pem -noout -subject The following RDNs are supported by strongSwan +-------------------------------------------------------+ | DC Domain Component | |-------------------------------------------------------| | C Country | |-------------------------------------------------------| | ST State or province | |-------------------------------------------------------| | L Locality or town | |-------------------------------------------------------| | O Organization | |-------------------------------------------------------| | OU Organizational Unit | |-------------------------------------------------------| | CN Common Name | |-------------------------------------------------------| | ND NameDistinguisher, used with CN | |-------------------------------------------------------| | N Name | |-------------------------------------------------------| | G Given name | |-------------------------------------------------------| | S Surname | |-------------------------------------------------------| | I Initials | |-------------------------------------------------------| | T Personal title | |-------------------------------------------------------| | E E-mail | |-------------------------------------------------------| | Email E-mail | |-------------------------------------------------------| | emailAddress E-mail | |-------------------------------------------------------| | SN Serial number | |-------------------------------------------------------| | serialNumber Serial number | |-------------------------------------------------------| | D Description | |-------------------------------------------------------| | ID X.500 Unique Identifier | |-------------------------------------------------------| | UID User ID | |-------------------------------------------------------| | TCGID [Siemens] Trust Center Global ID | |-------------------------------------------------------| | UN Unstructured Name | |-------------------------------------------------------| | unstructuredName Unstructured Name | |-------------------------------------------------------| | UA Unstructured Address | |-------------------------------------------------------| | unstructuredAddress Unstructured Address | |-------------------------------------------------------| | EN Employee Number | |-------------------------------------------------------| | employeeNumber Employee Number | |-------------------------------------------------------| | dnQualifier DN Qualifier | +-------------------------------------------------------+ With the roadwarrior connection definition listed above, an IPsec SA for the strongSwan security gateway moon.strongswan.org itself can be established. If any roadwarrior should be able to reach e.g. the two subnets 10.1.0.0/24 and 10.1.3.0/24 behind the security gateway then the following connection definitions will make this possible conn rw1 right=%any leftsubnet=10.1.0.0/24 conn rw3 right=%any leftsubnet=10.1.3.0/24 For IKEv2 connections this can even be simplified by using leftsubnet=10.1.0.0/24,10.1.3.0/24 If not all peers in possession of a X.509 certificate signed by a specific certificate authority shall be given access to the Linux security gateway, then either a subset of them can be barred by listing the serial numbers of their certificates in a certificate revocation list (CRL) as specified in section 5.2 or as an alternative, access can be controlled by explicitly putting a roadwarrior entry for each eligible peer into ipsec.conf: conn sun right=%any rightid=@sun.strongswan.org conn carol right=%any rightid=carol@strongswan.org conn dave right=%any rightid="C=CH, O=strongSwan, CN=dave@strongswan.org" When the IP address of a peer is known to be stable, it can be specified as well. This entry is mandatory when the strongSwan host wants to act as the initiator of an IPsec connection. conn sun right=192.168.0.2 rightid=@sun.strongswan.org conn carol right=192.168.0.100 rightid=carol@strongswan.org conn dave right=192.168.0.200 rightid="C=CH, O=strongSwan, CN=dave@strongswan.org" conn venus right=192.168.0.50 In the last example the ID types FQDN, RFC822_ADDR, DER_ASN1_DN and IPV4_ADDR, respectively, were used. Of course all connection definitions presented so far have included the lines in the conn %defaults section, comprising among other a leftcert entry. 4.4 Handling Virtual IPs and narrowing ---------------------------------- Often roadwarriors are behind NAT-boxes with IPsec passthrough, which causes the inner IP source address of an IPsec tunnel to be different from the outer IP source address usually assigned dynamically by the ISP. Whereas the varying outer IP address can be handled by the right=%any construct, the inner IP address or subnet must always be declared in a connection definition. Therefore for the three roadwarriors rw1 to rw3 connecting to a strongSwan security gateway the following entries are required in /etc/ipsec.conf: conn rw1 right=%any righsubnet=10.4.0.5/32 conn rw2 right=%any rightsubnet=10.4.0.47/32 conn rw3 right=%any rightsubnet=10.4.0.128/28 Because the charon daemon uses narrowing (even for IKEv1) these three entries can be reduced to the single connection definition conn rw right=%any rightsubnet=10.4.0.0/24 Any host will be accepted (of course after successful authentication based on the peer's X.509 certificate only) if it declares a client subnet lying totally within the brackets defined by the subnet definition (in our example 10.4.0.0/24). This strongSwan feature can also be helpful with VPN clients getting a dynamically assigned inner IP from a DHCP server located on the NAT router box. 4.5 Protocol and Port Selectors --------------------------- strongSwan offer the possibility to restrict the protocol and optionally the ports in an IPsec SA using the rightprotoport and leftprotoport parameters. Some examples: conn icmp right=%any rightprotoport=icmp leftid=@moon.strongswan.org leftprotoport=icmp conn http right=%any rightprotoport=6 leftid=@moon.strongswan.org leftprotoport=6/80 conn l2tp # with port wildcard for Mac OS X Panther interoperability right=%any rightprotoport=17/%any leftid=@moon.strongswan.org leftprotoport=17/1701 conn dhcp right=%any rightprotoport=udp/bootpc leftid=@moon.strongswan.org leftsubnet=0.0.0.0/0 #allows DHCP discovery broadcast leftprotoport=udp/bootps rekey=no keylife=20s rekeymargin=10s auto=add Protocols and ports can be designated either by their numerical values or by their acronyms defined in /etc/services. ipsec status shows the following connection definitions: "icmp": 192.168.0.1[@moon.strongswan.org]:1/0...%any:1/0 "http": 192.168.0.1[@moon.strongswan.org]:6/80...%any:6/0 "l2tp": 192.168.0.1[@moon.strongswan.org]:17/1701...%any:17/%any "dhcp": 0.0.0.0/0===192.168.0.1[@moon.strongswan.org]:17/67...%any:17/68 Based on the protocol and port selectors appropriate policies will be set up, so that only the specified payload types will pass through the IPsec tunnel. 4.6 IPsec policies based on wildcards --------------------------------- In large VPN-based remote access networks there is often a requirement that access to the various parts of an internal network must be granted selectively, e.g. depending on the group membership of the remote access user. strongSwan makes this possible by applying wildcard filtering on the VPN user's distinguished name (ID_DER_ASN1_DN). Let's make a practical example: An organization has a sales department (OU=Sales) and a research group (OU=Research). In the company intranet there are separate subnets for Sales (10.0.0.0/24) and Research (10.0.1.0/24) but both groups share a common web server (10.0.2.100). The VPN clients use Virtual IP addresses that are either assigned statically or from a dynamic pool. The sales and research departments use IP addresses from separate address pools (10.1.0.0/24) and (10.1.1.0/24), respectively. An X.509 certificate is issued to each employee, containing in its subject distinguished name the country (C=CH), the company (O=ACME), the group membership(OU=Sales or OU=Research) and the common name (e.g. CN=Bart Simpson). The IPsec policy defined above can now be enforced with the following three IPsec security associations: conn sales right=%any rightid="C=CH, O=ACME, OU=Sales, CN=*" rightsubnet=10.1.0.0/24 # Sales IP range leftsubnet=10.0.0.0/24 # Sales subnet conn research right=%any rightid="C=CH, O=ACME, OU=Research, CN=*" rightsubnet=10.1.1.0/24 # Research IP range leftsubnet=10.0.1.0/24 # Research subnet conn web right=%any rightid="C=CH, O=ACME, OU=*, CN=*" rightsubnet=10.1.0.0/23 # Remote access IP range leftsubnet=10.0.2.100/32 # Web server rightprotoport=tcp # TCP protocol only leftprotoport=tcp/http # TCP port 80 only The '*' character is used as a wildcard in relative distinguished names (RDNs). In order to match a wildcard template, the ID_DER_ASN1_DN of a peer must contain the same number of RDNs (selected from the list in section 4.3) appearing in the exact order defined by the template. "C=CH, O=ACME, OU=Research, OU=Special Effects, CN=Bart Simpson" matches the templates "C=CH, O=ACME, OU=Research, OU=*, CN=*" "C=CH, O=ACME, OU=*, OU=Special Effects, CN=*" "C=CH, O=ACME, OU=*, OU=*, CN=*" but not the template "C=CH, O=ACME, OU=*, CN=*" which doesn't have the same number of RDNs. 4.7 IPsec policies based on CA certificates --------------------------------------- As an alternative to the wildcard based IPsec policies described in section 4.6, access to specific client host and subnets can be controlled on the basis of the CA that issued the peer certificate conn sales right=%any rightca="C=CH, O=ACME, OU=Sales, CN=Sales CA" rightsubnet=10.1.0.0/24 # Sales IP range leftsubnet=10.0.0.0/24 # Sales subnet conn research right=%any rightca="C=CH, O=ACME, OU=Research, CN=Research CA" rightsubnet=10.1.1.0/24 # Research IP range leftsubnet=10.0.1.0/24 # Research subnet conn web right=%any rightca="C=CH, O=ACME, CN=ACME Root CA" rightsubnet=10.1.0.0/23 # Remote access IP range leftsubnet=10.0.2.100/32 # Web server rightprotoport=tcp # TCP protocol only leftprotoport=tcp/http # TCP port 80 only In the example above, the connection "sales" can be used by peers presenting certificates issued by the Sales CA, only. In the same way, the use of the connection "research" is restricted to owners of certificates issued by the Research CA. The connection "web" is open to both "Sales" and "Research" peers because the required "ACME Root CA" is the issuer of the Research and Sales intermediate CAs. If no rightca parameter is present then any valid certificate issued by one of the trusted CAs in /etc/ipsec.d/cacerts can be used by the peer. The leftca parameter usually doesn't have to be set explicitly because by default it is set to the issuer field of the certificate loaded via leftcert. The statement rightca=%same sets the CA requested from the peer to the CA used by the left side itself as e.g. in conn sales right=%any rightca=%same leftcert=mySalesCert.pem 5. Configuring certificates and CRLs --------------------------------- 5.1 Installing the CA certificates ------------------------------ X.509 certificates received by strongSwan during the IKE protocol are automatically authenticated by going up the trust chain until a self-signed root CA certificate is reached. Usually host certificates are directly signed by a root CA, but strongSwan also supports multi-level hierarchies with intermediate CAs in between. All CA certificates belonging to a trust chain must be copied in either binary DER or base64 PEM format into the directory /etc/ipsec.d/cacerts/ 5.2 Installing optional certificate revocation lists (CRLs) ------------------------------------------------------- By copying a CA certificate into /etc/ipsec.d/cacerts/, automatically all user or host certificates issued by this CA are declared valid. Unfortunately, private keys might get compromised inadvertently or intentionally, personal certificates of users leaving a company have to be blocked immediately, etc. To this purpose certificate revocation lists (CRLs) have been created. CRLs contain the serial numbers of all user or host certificates that have been revoked due to various reasons. After successful verification of the X.509 trust chain, strongSwan searches its list of CRLs either obtained by loading them from the /etc/ipsec.d/crls/ directory or fetching them dynamically from a HTTP or LDAP server for the presence of a CRL issued by the CA that has signed the certificate. If the serial number of the certificate is found in the CRL then the public key contained in the certificate is declared invalid and the IPsec SA will not be established. If no CRL is found or if the deadline defined in the nextUpdate field of the CRL has been reached, a warning is issued but the public key will nevertheless be accepted. CRLs must be stored either in binary DER or base64 PEM format in the crls directory. 5.3 Dynamic update of certificates and CRLs --------------------------------------- strongSwan reads certificates and CRLs from their respective files during system startup and keeps them in memory. X.509 certificates have a finite life span defined by their validity field. Therefore it must be possible to replace CA or OCSP certificates kept in system memory without disturbing established IKE SAs. Certificate revocation lists should also be updated in the regular intervals indicated by the nextUpdate field in the CRL body. The following interactive commands allow the manual replacement of the various files: +---------------------------------------------------------------------------+ | ipsec rereadsecrets reload file /etc/ipsec.secrets | |---------------------------------------------------------------------------| | ipsec rereadcacerts reload all files in /etc/ipsec.d/cacerts/ | |---------------------------------------------------------------------------| | ipsec rereadaacerts reload all files in /etc/ipsec.d/aacerts/ | |---------------------------------------------------------------------------| | ipsec rereadocspcerts reload all files in /etc/ipsec.d/ocspcerts/ | |---------------------------------------------------------------------------| | ipsec rereadacerts reload all files in /etc/ipsec.d/acerts/ | |---------------------------------------------------------------------------| | ipsec rereadcrls reload all files in /etc/ipsec.d/crls/ | |---------------------------------------------------------------------------| | ipsec rereadall ipsec rereadsecrets | | rereadcacerts | | rereadaacerts | | rereadocspcerts | | rereadacerts | | rereadcrls | |---------------------------------------------------------------------------| | ipsec purgeocsp purge the OCSP cache and fetching requests | +---------------------------------------------------------------------------+ CRLs can also be automatically fetched from an HTTP or LDAP server by using the CRL distribution points contained in X.509 certificates. 5.4 Local caching of CRLs --------------------- The the ipsec.conf option config setup cachecrls=yes activates the local caching of CRLs that were dynamically fetched from an HTTP or LDAP server. Cached copies are stored in /etc/ipsec.d/crls using a unique filename formed from the issuer's SubjectKeyIdentifier and the suffix .crl. With the cached copy the CRL is immediately available after startup. When the local copy is about to expire it is automatically replaced with an updated CRL fetched from one of the defined CRL distribution points. 5.5 Online Certificate Status Protocol (OCSP) ----------------------------------------- The Online Certificate Status Protocol is defined by RFC 2560. It can be used to query an OCSP server about the current status of an X.509 certificate and is often used as a more dynamic alternative to a static Certificate Revocation List (CRL). Both the OCSP request sent by the client and the OCSP response messages returned by the server are transported via a standard TCP/HTTP connection. Therefore cURL support must be enabled during configuration. In the simplest OCSP setup, a default URI under which the OCSP server for a given CA can be accessed is defined in ipsec.conf: ca strongswan cacert=strongswanCert.pem ocspuri=http://ocsp.strongswan.org:8880 auto=add The HTTP port can be freely chosen. OpenSSL implements an OCSP server that can be used in conjunction with an openssl-based Public Key Infrastructure. The OCSP server is started with the following command: openssl ocsp -index index.txt -CA strongswanCert.pem -port 8880 \ -rkey ocspKey.pem -rsigner ocspCert.pem \ -resp_no_certs -nmin 60 -text The command consists of the parameters -index index.txt is a copy of the OpenSSL index file containing the list of all issued certificates. The certificate status in index.txt is designated either by V for valid or R for revoked. If a new certificate is added or if a certificate is revoked using the openssl ca command, the OCSP server must be restarted in order for the changes in index.txt to take effect. -CA the CA certificate -port the HTTP port the OCSP server is listening on. -rkey the private key used to sign the OCSP response. The use of the sensitive CA private key is not recommended since this could jeopardize the security of your production PKI if the OCSP server is hacked. It is much better to generate a special RSA private key just for OCSP signing use instead. -rsigner the certificate of the OCSP server containing a public key which matches the private key defined by -rkey and which can be used by the client to check the trustworthiness of the signed OCSP response. -resp_no_certs With this option the OCSP signer certificate defined by -rsigner is not included in the OCSP response. -nmin the validity interval of an OCSP response given in minutes. -text this option activates a verbose logging output, showing the contents of both the received OCSP request and sent OCSP response. The OCSP signer certificate can either be put into the default directory /etc/ipsec.d/ocspcerts or alternatively strongSwan can receive it as part of the OCSP response from the remote OCSP server. In order to verify that the server is indeed authorized by a CA to deal out certificate status information an extended key usage attribute must be included in the OCSP server certificate. Just insert the parameter extendedKeyUsage=OCSPSigner in the [ usr_cert ] section of your openssl.cnf configuration file before the CA signs the OCSP server certificate. For a given CA the corresponding ca section in ipsec.conf (see section 7) allows to define the URI of a single OCSP server. As an alternative an OCSP URI can be embedded into each host and user certificate by putting the line authorityInfoAccess = OCSP;URI:http://ocsp.strongswan.org:8880 into the [ usr_cert ] section of your openssl.cnf configuration file. If an OCSP authorityInfoAccess extension is present in a certificate then this record overrides the default URI defined by the ca section. 5.6 CRL Policy ---------- By default strongSwan is quite tolerant concerning the handling of CRLs. It is not mandatory for a CRL to be present in /etc/ipsec.d/crls and if the expiration date defined by the nextUpdate field of a CRL has been reached just a warning is issued but a peer certificate will always be accepted if it has not been revoked. If you want to enforce a stricter CRL policy then you can do this by setting the "strictcrlpolicy" option. This is done in the "config setup" section of the ipsec.conf file: config setup strictcrlpolicy=yes ... A certificate received from a peer will not be accepted if no corresponding CRL or OCSP response is available. And if an ISAKMP SA re-negotiation takes place after the nextUpdate deadline has been reached, the peer certificate will be declared invalid and the cached RSA public key will be deleted, causing the connection in question to fail. Therefore if you are going to use the "strictcrlpolicy=yes" option, make sure that the CRLs will always be updated in time. Otherwise a total standstill would ensue. As mentioned earlier the default setting is "strictcrlpolicy=no" 5.7 Configuring the peer side using locally stored certificates ----------------------------------------------------------- If you don't want to use trust chains based on CA certificates as proposed in section 4.3 you can alternatively import trusted peer certificates directly. Thus you do not have to rely on the certificate to be transmitted by the peer as part of the IKE protocol. With the conn %default section defined in section 4.1 and the use of the rightcert keyword for the peer side, the connection definitions in section 4.3 can alternatively be written as conn sun right=%any rightid=@sun.strongswan.org rightcert=sunCert.cer conn carol right=192.168.0.100 rightcert=carolCert.der If the peer certificates are loaded locally then there is no sense in sending any certificates to the other end via the IKE protocol. Especially if self-signed certificates are used which wouldn't be accepted anyway by the other side. In these cases it is recommended to add leftsendcert=never to the connection definition[s] in order to avoid the sending of the host's own certificate. The default value is leftsendcert=ifasked If a peer does not send a certificate request then use the setting leftsendcert=always If a peer certificate contains a subjectAltName extension, then an alternative rightid type can be used, as the example "conn sun" shows. If no rightid entry is present then the subject distinguished name contained in the certificate is taken as the ID. Using the same rules concerning pathnames that apply to strongSwan's own certificates, the following two definitions are also valid for trusted peer certificates: rightcert=peercerts/carolCert.der or rightcert=/usr/ssl/certs/carolCert.der 6. Configuring the private keys - ipsec.secrets -------------------------------------------- 6.1 Loading private key files in PKCS#1 or PKCS#8 format ---------------------------------------------------- Besides strongSwan's raw private key format strongSwan has been enabled to load RSA (or ECDSA) private keys in the PKCS#1 or PKCS#8 file format. The key files can be optionally secured with a passphrase. RSA private key files are declared in /etc/ipsec.secrets using the syntax : RSA "" The key file can be either in base64 PEM-format or binary DER-format. The actual coding is detected automatically. The example : RSA moonKey.pem uses a pathname relative to the default directory /etc/ipsec.d/private As an alternative an absolute pathname can be given as in : RSA /usr/ssl/private/moonKey.pem In both cases make sure that the key files are root readable only. Often a private key must be transported from the Certification Authority where it was generated to the target security gateway where it is going to be used. In order to protect the key it can be encrypted with a symmetric cipher using a transport key derived from a cryptographically strong passphrase. Once on the security gateway the private key can either be permanently unlocked so that it can be used by Pluto without having to know a passphrase openssl rsa -in moonKey.pem -out moonKey.pem or as an option the key file can remain secured. In this case the passphrase unlocking the private key must be added after the pathname in /etc/ipsec.secrets : RSA moonKey.pem "This is my passphrase" Some CAs distribute private keys embedded in a PKCS#12 file. Since strongSwan is not yet able to read this format directly, the private key part must first be extracted using the command openssl pkcs12 -nocerts -in moonCert.p12 -out moonKey.pem if the key file moonKey.pem is to be secured again by a passphrase, or openssl pkcs12 -nocerts -nodes -in moonCert.p12 -out moonKey.pem if the private key is to be stored unlocked. 6.2 Entering passphrases interactively ---------------------------------- On a VPN gateway you would want to put the passphrase protecting the private key file right into /etc/ipsec.secrets as described in the previous paragraph, so that the gateway can be booted in unattended mode. The risk of keeping unencrypted secrets on a server can be minimized by putting the box into a locked room. As long as no one can get root access on the machine the private keys are safe. On a mobile laptop computer the situation is quite different. The computer can be stolen or the user is leaving it unattended so that unauthorized persons can get access to it. In theses cases it would be preferable not to keep any passphrases openly in /etc/ipsec.secrets but to prompt for them interactively instead. This is easily done by defining : RSA moonKey.pem %prompt Since strongSwan is usually started during the boot process, usually no interactive console windows is available which can be used to prompt for the passphrase. This must be initiated by the user by typing ipsec secrets which actually is an alias for the existing command ipsec rereadsecrets and which causes a passphrase prompt to appear. To abort entering a passphrase enter just a carriage return. 6.3 Multiple private keys --------------------- strongSwan supports multiple private keys. Since the connections defined in ipsec.conf can find the correct private key based on the public key contained in the certificate assigned by leftcert, default private key definitions without specific IDs can be used : RSA myKey1.pem "" : RSA myKey2.pem "" 7. Configuring CA properties - ipsec.conf -------------------------------------- Besides the definition of IPsec connections the ipsec.conf file can also be used to configure a few properties of the certification authorities needed to establish the X.509 trust chains. The following example shows some of the parameters that are currently available: ca strongswan cacert=strongswanCert.pem ocspuri=http://ocsp.strongswan.org:8880 crluri=http://crl.strongswan.org/strongswan.crl' crluri2="ldap://ldap.strongswan.org/O=strongSwan, C=CH?certificateRevocationList" auto=add In a similar way as conn sections are used for connection definitions, an arbitrary number of optional ca sections define the basic properties of CAs. Each ca section is named with a unique label ca strongswan The only mandatory parameter is cacert=strongswanCert.pem which points to the CA certificate which usually resides in the default directory /etc/ipsec.d/cacerts/ but could also be retrieved via an absolute path name. The OCSP URI ocspuri=http://ocsp.strongswan.org:8880 allows to define an individual OCSP server per CA. Also up to two additional CRL distribution points (CDPs) can be defined crluri=http://crl.strongswan.org/strongswan.crl' crluri2="ldap://ldap.strongswan.org/O=strongSwan, C=CH?certificateRevocationList" which are added to any CDPs already present in the received certificates themselves. With the auto=add statement the ca definition is automatically loaded during startup. Setting auto=ignore will ignore the ca section. Any parameters which appear in several ca definitions can be put in a common ca %default section ca %default crluri=http://crl.strongswan.org/strongswan.crl' 8. Monitoring functions -------------------- strongSwan offers the following monitoring functions: The command ipsec listalgs lists all IKE cryptographic algorithms that are currently registered with strongSwan. The command ipsec listcerts [--utc] lists all local certificates, both strongSwan's own and those of trusted peer loaded via leftcert and rightcert, respectively. The command ipsec listcacerts [--utc] lists all CA certificates that have been either been loaded from the directory /etc/ipsec.d/cacerts/ or received via the IKE protocol. The command ipsec listaacerts [--utc] lists all Authorization Authority certificates that have been loaded from the directory /etc/ipsec.d/aacerts/. The command ipsec listocspcerts [--utc] lists all OCSO signer certificates that have been either loaded from /etc/ipsec.d/ocspcerts/ or have been received included in the OCSP server response. The command ipsec listacerts [--utc] lists all X.509 attribute certificates that have been loaded from the directory /etc/ipsec.d/acerts/. The command ipsec listcainfos [--utc] lists the properties defined by the ca definition sections in ipsec.conf. The command ipsec listcrls [--utc] lists all CRLs that have been loaded from /etc/ipsec.d/crls/. The command ipsec listocsp [--utc] lists the contents of the OCSP response cache. The command ipsec listall [--utc] is equivalent to using all of the above commands. 9. Firewall support functions -------------------------- 9.1 Environment variables in the updown script ------------------------------------------ strongSwan makes the following environment variables available in the updown script indicated by the leftupdown option: +-------------------------------------------------------------------+ | Variable Example Comment | |-------------------------------------------------------------------| | $PLUTO_PEER_ID carol@strongswan.org RFC822_ADDR (1) | |-------------------------------------------------------------------| | $PLUTO_PEER_PROTOCOL 17 udp (2) | |-------------------------------------------------------------------| | $PLUTO_PEER_PORT 68 bootpc (3) | |-------------------------------------------------------------------| | $PLUTO_PEER_CA C=CH, O=ACME, CN=Sales CA (4) | |-------------------------------------------------------------------| | $PLUTO_MY_ID @moon.strongswan.org FQDN (1) | |-------------------------------------------------------------------| | $PLUTO_MY_PROTOCOL 17 udp (2) | |-------------------------------------------------------------------| | $PLUTO_MY_PORT 67 bootps (3) | +-------------------------------------------------------------------+ (1) $PLUTO_PEER_ID/$PLUTO_MY_ID contain the IDs of the two ends of an established connection. In our examples these correspond to the strings defined by rightid and leftid, respectively. (2) $PLUTO_PEER_PROTOCOL/$PLUTO_MY_PROTOCOL contain the protocol defined by the rightprotoport and leftprotoport options, respectively. Both variables contain the same protocol value. The variables take on the value '0' if no protocol has been defined. (3) $PLUTO_PEER_PORT/$PLUTO_MY_PORT contain the ports defined by the rightprotoport and leftprotoport options, respectively. The variables take on the value '0' if no port has been defined. (4) $PLUTO_PEER_CA contains the distinguished name of the CA that issued the peer's certificate. There are several more, refer to the provided default script for a documentation of these. 9.2 Automatic insertion and deletion of iptables firewall rules ----------------------------------------------------------- The default _updown script automatically inserts and deletes dynamic iptables firewall rules upon the establishment or teardown, respectively, of an IPsec security association. This feature is activated with the line leftfirewall=yes If you define a local client subnet with a netmask larger than /32 behind the gateway then the automatically inserted FORWARD iptables rules will not allow to access the internal IP address of the host although it is part of the client subnet definition. If you want additional INPUT and OUTPUT iptables rules to be inserted, so that the host itself can be accessed then add the following line: lefthostaccess=yes The _updown script also features a logging facility which will register the creation (+) and the expiration (-) of each successfully established VPN connection in a special syslog file in the following concise and easily readable format: Jul 19 18:58:38 moon vpn: + @carol.strongswan.org 192.168.0.100 -- 192.168.0.1 == 10.1.0.0/16 Jul 19 22:15:17 moon vpn: - @carol.strongswan.org 192.168.0.100 -- 192.168.0.1 == 10.1.0.0/16