strongswan (5.3.3-3) unstable; urgency=high * Set urgency=high for security fix. * debian/patches: - CVE-2015-8023_eap_mschapv2_state added, fix authentication bypass when using EAP MSCHAPv2. -- Yves-Alexis Perez Mon, 16 Nov 2015 12:35:28 +0100 strongswan (5.3.3-2) unstable; urgency=medium * debian/rules: - make the dh_install override arch-dependent only since it only acts on arch:any packages, fix FTBFS on arch:all. -- Yves-Alexis Perez Wed, 04 Nov 2015 13:52:02 +0100 strongswan (5.3.3-1) unstable; urgency=medium * debian/rules: - enable the connmark plugin. * debian/control: - add build-dep on iptables-dev. * debian/libstrongswan-standard-plugins: - add connmark plugin to the standard-plugins package. * New upstream release. closes: #803772 * debian/strongswan-starter.install: - install new pki --dn manpage to ipsec-starter package. * debian/patches: - 0001-socket-default-Refactor-setting-source-address-when- and 0001-socket-dynamic-Refactor-setting-source-address-when- added (taken from c761db and 9e8b4a in the 1171-socket-default-scope branch), fix source address selection with IPv6 (upstream #1171) -- Yves-Alexis Perez Tue, 03 Nov 2015 21:56:23 +0100 strongswan (5.3.2-1) unstable; urgency=medium * New upstream release. * debian/patches: - 05_ivgen-allow-reusing-same-message-id-twice dropped, included upstream. - CVE-2015-4171_enforce_remote_auth dropped as well. -- Yves-Alexis Perez Thu, 11 Jun 2015 21:36:33 +0200 strongswan (5.3.1-1) unstable; urgency=high * New upstream release. * debian/patches: - strongswan-5.2.2-5.3.0_unknown_payload dropped, included upstream. - 05_ivgen-allow-reusing-same-message-id-twice added, allow reusing the same message ID twice in sequential IV gen. strongSwan issue #980. - CVE-2015-4171_enforce_remote_auth added, fix potential leak of authentication credential to rogue server when using PSK or EAP. This is CVE-2015-4171. -- Yves-Alexis Perez Thu, 04 Jun 2015 19:18:07 +0200 strongswan (5.3.0-2) unstable; urgency=medium * debian/patches: - strongswan-5.2.2-5.3.0_unknown_payload added, fixes a DoS and potential remote code execution vulnerability (CVE-2015-3991). * debian/strongswan-starter.lintian-overrides: add override for command-with-path-in-maintainer-script since it's there to check for file existence. * Upload to unstable. -- Yves-Alexis Perez Sat, 23 May 2015 15:06:11 +0200 strongswan (5.3.0-1) experimental; urgency=medium * New upstream release. * debian/patches: - 01_fix-manpages refreshed for new upstream release. - 02_chunk-endianness dropped, included upstream. - CVE-2014-9221_modp_custom dropped, included upstream. * debian/strongswan-starter.install - don't install the _updown and _updown_espmark manpages anymore, they're gone. - also remove the _updown_espmark script, gone too. * debian/copyright updated. -- Yves-Alexis Perez Wed, 15 Apr 2015 20:59:54 +0200 strongswan (5.2.1-6) unstable; urgency=medium * Ship /lib/systemd/system/ipsec.service as a symlink to strongswan.service in strongswan-starter instead of using Alias= in the service file. This makes the ipsec name available to invoke-rc.d before the service gets actually enabled, which avoids some confusion (closes: #781209). -- Romain Francoise Sat, 04 Apr 2015 17:55:38 +0200 strongswan (5.2.1-5) unstable; urgency=high * debian/patches: - debian/patches/CVE-2014-9221_modp_custom added, fix unauthenticated denial of service in IKEv2 when using custom MODP value. -- Yves-Alexis Perez Mon, 05 Jan 2015 13:11:51 +0100 strongswan (5.2.1-4) unstable; urgency=medium * Give up on trying to run the test suite on !amd64, it now times out on both i386 and s390x, our chosen "fast" archs. -- Romain Francoise Fri, 24 Oct 2014 21:08:17 +0200 strongswan (5.2.1-3) unstable; urgency=medium * Disable libtls tests again, they are still too intensive for the buildd network... -- Romain Francoise Thu, 23 Oct 2014 18:09:27 +0200 strongswan (5.2.1-2) unstable; urgency=medium * Cherry-pick commits 701d6ed and 1c70c6e from upstream to fix checksum computation and FTBFS on big-endian hosts. * Run the test suite only on amd64, i386, and s390x. It requires lots of entropy and CPU time, which are typically hard to come by on slower archs. * Re-enable normal keylengths in test suite. * Re-enable libtls tests. * Update Dutch translation, thanks to Frans Spiesschaert (closes: #763798). * Bump Standards-Version to 3.9.6. -- Romain Francoise Wed, 22 Oct 2014 21:21:37 +0200 strongswan (5.2.1-1) unstable; urgency=medium * New upstream release. * Stop shipping /etc/strongswan.conf.d in libstrongswan. -- Romain Francoise Tue, 21 Oct 2014 19:38:25 +0200 strongswan (5.2.0-2) unstable; urgency=medium * Add systemd integration: + Install upstream systemd service file in strongswan-starter. + Alias strongswan.service to ipsec.service to match the sysv init script. + Drop After=syslog.target (as syslog is socket-activated nowadays), but add After=network.target to ensure that charon gets the chance to send deletes on exit. + Add ExecReload for reload action, since the starter script has one. + On linux-any, add build-dep on systemd to ensure that the pkg-config metadata file can be found. + Add build-dep on dh-systemd, and use systemd dh addon. * Remove debian/patches/03_include-stdint.patch. -- Romain Francoise Wed, 30 Jul 2014 21:37:53 +0200 strongswan (5.2.0-1) unstable; urgency=medium * New upstream release. [ Romain Francoise ] * Amend build-dep on libgcrypt to 'libgcrypt20-dev | libgcrypt11-dev'. * Drop hardening-wrapper from build-depends (unused since 5.0.4-1). [ Yves-Alexis Perez ] * debian/po: - pt_BR.po updated, thanks Adriano Rafael Gomes. closes: #752721 * debian/patches: 03_pfkey-Always-include-stdint.h dropped, included upstream. * debian/strongswan-starter.install: - replace tools.conf by pki.conf and scepclient.conf. -- Yves-Alexis Perez Fri, 11 Jul 2014 21:57:59 +0200 strongswan (5.1.3-4) unstable; urgency=medium * debian/control: - add build-dep on pkg-config. * debian/patches: - 03_pfkey-Always-include-stdint.h added, cherry-picked from upstream git: always include of stdint.h. Fix FTBFS on kFreeBSD. -- Yves-Alexis Perez Mon, 19 May 2014 15:06:32 +0200 strongswan (5.1.3-3) unstable; urgency=medium * debian/watch: - add pgpsigurlmangle to get PGP signature * debian/upstream/signing-key.asc: - bootstrap keyring by adding Andreas Steffen key (0xDF42C170B34DBA77) * debian/control: - add build-dep on libgcrypt20-dev, fix FTBFS. closes: #747796 -- Yves-Alexis Perez Tue, 13 May 2014 22:05:16 +0200 strongswan (5.1.3-2) unstable; urgency=low * Disable the new libtls test suite for now--it appears to be a little too intensive for slower archs. -- Romain Francoise Sat, 19 Apr 2014 17:45:51 +0200 strongswan (5.1.3-1) unstable; urgency=low * New upstream release. * debian/control: make strongswan-charon depend on iproute2 | iproute, thanks to Ryo IGARASHI (closes: #744832). -- Romain Francoise Tue, 15 Apr 2014 19:42:27 +0200 strongswan (5.1.2-4) unstable; urgency=high * debian/patches/04_cve-2014-2338.patch: added to fix CVE-2014-2338 (authentication bypass vulnerability in IKEv2 code). * debian/control: add myself to Uploaders. -- Romain Francoise Tue, 08 Apr 2014 20:14:54 +0200 strongswan (5.1.2-3) unstable; urgency=medium * debian/patches/ - 02_unit-tests-Fix-filtered-enumerator-tests-on-64-bit-b added, fix testsuite failing on 64 bit big-endian platforms (s390x). - 03_unit-tests-Fix-chunk-clear-armel added, fix testsuite failing on armel. -- Yves-Alexis Perez Wed, 02 Apr 2014 21:20:33 +0200 strongswan (5.1.2-2) unstable; urgency=medium * debian/rules: - use reduced keylengths in testsuite on various arches, hopefully fixing FTBFS when the genrsa test runs. -- Yves-Alexis Perez Tue, 25 Mar 2014 12:09:49 +0100 strongswan (5.1.2-1) unstable; urgency=medium * New upstream release. * debian/control: - add conflicts against openSwan. closes: #740808 * debian/strongswan-starter,postrm: - remove /var/lib/strongswan on purge. * debian/ipsec.secrets.proto: - stop lying about ipsec showhostkey command. closes: #600382 * debian/patches: - 01_fix-manpages refreshed for new upstream. - 02_include-strongswan.conf.d removed, strongswan.d is now supported upstream. * debian/rules, debian/*.install: - install default configuration files for all plugins. * debian/NEWS: - fix spurious entry. - add a NEWS entry to advertise about the new strongswan.d configuration mechanism. -- Yves-Alexis Perez Wed, 12 Mar 2014 11:22:38 +0100 strongswan (5.1.1-3) unstable; urgency=low * Upload to unstable. -- Yves-Alexis Perez Tue, 04 Mar 2014 21:57:25 +0100 strongswan (5.1.1-2+splitplugins) experimental; urgency=medium * debian/control: - drop dependency on host, inherited from openSwan. closes: #736661 - split charon-cmd to a standalone package. - add new plugins packages: libstrongswan-standard-plugins, libstrongswan-extra-plugins and libcharon-extra-plugins. - split strongswan-ike package to strongswan-libcharon (libcharon and default libcharon plugins) and strongswan-charon (charon daemon), keep strongswan-ike as transitional package for now. * debian/po: - sv.po updated, thanks Martin Bagge. closes: #725667 * debian/charon-cmd.lintian-overrides: override lintian error about charon-cmd rpath. -- Yves-Alexis Perez Mon, 24 Feb 2014 10:42:49 +0100 strongswan (5.1.1-2) unstable; urgency=medium * debian/control: - drop dependency on host, inherited from openSwan. closes: #736661 * debian/po: - sv.po updated, thanks Martin Bagge. closes: #725667 -- Yves-Alexis Perez Mon, 24 Feb 2014 10:32:12 +0100 strongswan (5.1.1-1) unstable; urgency=low [ Yves-Alexis Perez ] * New upstream bugfix release * debian/rules: - enable and install af-alg plugin on Linux. closes: #718292 - enable certexpire plugin. closes: #718293 - enable lookip plugin. closes: #718299 - enable error-notify plugin. closes: #718304 - enable unity plugin. closes: #718289 * debian/strongswan-ike.install: - install certexpire and unity plugins. - install lookip binary and plugin. - install error-notify binary and plugin. * debian/strongswan-starter.install: - pki tool is now in /usr/bin. - add pt-tls-client for TCG Trusted Network Connect. * debian/control: - update long description, thanks to Justin B Rye. closes: #725085 - make the pkg-swan-devel list the maintainer, and add René to uploaders. - update standards version to 3.9.5. * debian/po: - eu.po updated, thanks Iñaki Larrañaga Murgoitio. closes: #726636 - ja.po updated. closes: #726059 - cs.po updated, thanks Miroslav Kure. closes: #728104 - ru.po updated, thanks Yuri Kozlov. closes: #725709 - da.po updated. closes: #725620 - nb.po updated, thanks Bjørn Steensrud. closes: #725497 - fr.po updated, thanks Christian Perrier. closes: #725469 - tr.po updated, thanks Atila KOÇ. closes: #728874 - it.po updated, thanks Beatrice Torracca. closes: #729122 - de.po updated, thanks Helge Kreutzmann. closes: #729170 - pt.po updated, thanks Américo Monteiro. closes: #729823 - es.po updated, thanks Matias A. Bellone. closes: #733731 * debian/patches: - CVE-2013-6075 and CVE-2013-6076 dropped, included upstream. - 01_fix-manpages updated, move pki --issue manpage to section 1. * debian/strongswan-starter.ipsec.init: - use daemon exe in start-stop-daemon test. closes: #730661 [ Romain Francoise ] * debian/rules: - disable built-in integrity tests; they've been broken for years, don't provide security (by design) and we have better tools at the package level anyway. closes: #598138 - disable sql and attr-sql plugins, as per discussion in #718302 they are useless without the database driver plugins. * debian/libstrongswan.install: - libchecksum.so is no longer built, remove. - sql plugin is no longer built, remove. * debian/strongswan-starter.install: - 'ipsec pool' is no longer built, remove. [ Raphael Geissert ] * Allow the configuration of strongswan.conf to be stored in snippets in /etc/strongswan.conf.d/ -- Yves-Alexis Perez Fri, 24 Jan 2014 21:22:32 +0100 strongswan (5.1.0-3) unstable; urgency=high * urgency=high for the security fixes. * debian/patches - CVE-2013-6075 added, fix remote denial of service and authorization bypass. - CVE-2013-6076 added, fix remote denial of service in IKEv1 code. -- Yves-Alexis Perez Tue, 29 Oct 2013 21:07:04 +0100 strongswan (5.1.0-2) unstable; urgency=medium * urgency=medium since we already spent 16 days in unstable and the fix is trivial * debian/control: - strongswan-ike: only depends on iproute on linux arches. -- Yves-Alexis Perez Thu, 17 Oct 2013 21:40:35 +0200 strongswan (5.1.0-1) unstable; urgency=low * New upstream release. * debian/libstrongswan.install: - install new rc2, pkcs12 and sshkey plugins. * debian/control: - update standards version to 3.9.4. - add build-dep on dh-autoreconf. * debian/rules: - use autoreconf addon to refresh autotools helper files and gain support for ARM64. - enable charon-cmd command line tool. * debian/source/options: ignore files regenerated by autoreconf addon. * debian/strongswan-ike.install: - install charon-cmd command and manpage. * debian/NEWS: - warn users about charon replacing pluto as IKEv1 daemon and provide some migration pointers. -- Yves-Alexis Perez Mon, 30 Sep 2013 20:59:04 +0200 strongswan (5.0.4-3) experimental; urgency=low * debian/rules, debian/libstrongswan.install: - only install rdrand plugin on i386 and amd64. -- Yves-Alexis Perez Sat, 18 May 2013 09:26:22 +0200 strongswan (5.0.4-2) experimental; urgency=low * debian/rules: - only enable RdRand on i386 and amd64. -- Yves-Alexis Perez Mon, 06 May 2013 13:14:03 +0200 strongswan (5.0.4-1) experimental; urgency=low * New upstream release. - Fix for ECDSA signature verification vulnerability (CVE-2013-2944). * debian/patches: - 01_fix-manpages refreshed. - 02_add-LICENSE dropped, included upstream. - 03_Pass-lo-as-faked-tundev-to-NM-as-it-now-needs-a-vali removed, included upstream. - 04-Fixed-IPv6-source-address-lookup dropped, included upstream. * debian/rules: - --enable-smartcard, --with-default-pkcs11 and --enable-nat-transport not valid anymore for ./configure, remove them. - add --enable-xauth-eap and --enable-xauth-pam. - remove pluto handling since it's gone - don't special-case XAuth on kFreeBSD anymore. - add --enable-attr-sql and --enable-rdrand. - build using all hardening flags. - use -Wl,--as-needed -Wl,-O1 for LDFLAGS. * debian/control: - drop strongswan-ikev1 package - rename strongswan-ikev2 package to strongswan-ike for now and makes it replace strongswan-ikev1 and strongswan-ikev2. - rephrase long description to remove references to pluto. - provide transition -ikev{1,2} packages for upgrades. * debian/strongswan-ikev1.install removed. * debian/strongswan-ikev2.* renamed to strongswan-ike. * debian/strongswan-nm.install: - NetworkManager plugin is now a separate executable. * debian/libstrongswan.install: - install new pkcs7, xauth-eap, xauth-generic, xauth-pam and nonce plugins. - install libpttls files (experimental implementation of PT-TLS, RFC 6876) - install rdrand plugin. * debian/strongswan.docs: CREDITS file is gone. * debian/ipsec.secrets.proto: remove reference to pluto. * debian/strongswan-starter.* remove references to pluto. * debian/po: update potfiles for new phrasing. -- Yves-Alexis Perez Sun, 05 May 2013 11:06:20 +0200 strongswan (4.6.4-6) unstable; urgency=low * debian/rules: - revert dropping privileges, it breaks too many setups for now and it's not possible to disable it. reopens #529854 and closes: #680722 * debian/control: - add Breaks/Replaces strongswan-ikev2 on libstrongswan because of moved plugins. closes: #681312 -- Yves-Alexis Perez Sat, 01 Dec 2012 14:24:49 +0100 strongswan (4.6.4-5) unstable; urgency=low [ Yves-Alexis Perez ] * debian/control: - and finally make libcap-dev linux-any too... - make -ikev1 linux-any since pluto can't be build on FreeBSD. * debian/rules: - stop installing logcheck rules manually. closes: #679745 - handle non kFreeBSD more carefully closes: #640928 + don't enable NM and Linux capabilities drop; + disable pluto (and xauth plugin); + don't enable farp and dhcp, enable kernel-pf{key,route} plugins * Handle logcheck files from dh_installlogcheck and thus name them correctly so they are not installed in the wrong package. closes: #679745 * debian/po - add turkish translation, thanks Atila KOÇ. closes: #659879 * debian/patches: - 04-Fixed-IPv6-source-address-lookup added, backported from upstream. Fix IPv6 tunnels, broken because of bad handling of source routing. [ Laurent Bigonville ] * Do not use multi-arch paths, this makes no sense as only one instance of the daemon can be run and all libraries are private. * d/p/03_Pass-lo-as-faked-tundev-to-NM-as-it-now-needs-a-vali.patch: NM now requires a tundev, pass the loopback interface to make it happy (thanks to Martin Willi) * debian/control: Fix Vcs-Browser URL -- Yves-Alexis Perez Sat, 07 Jul 2012 14:21:03 +0200 strongswan (4.6.4-4) unstable; urgency=low * debian/control: - libnm-glib-vpn-dev also is linux-any, fix build-deps. -- Yves-Alexis Perez Sat, 30 Jun 2012 18:54:00 +0200 strongswan (4.6.4-3) unstable; urgency=low * debian/strongswan-starter.postrm - remove strongswan user on purge. * debian/rules: - enable gcrypt plugin. closes: #600326 * debian/libstrongswan.install: - ship gcrypt plugin. -- Yves-Alexis Perez Sat, 30 Jun 2012 17:08:08 +0200 strongswan (4.6.4-2) unstable; urgency=low * Upload to unstable. * debian/rules: - use the strongswan user. closes: #529854 * debian/control: - fix libnm-glib-vpn-dev build-dep, it's linux-any. -- Yves-Alexis Perez Sat, 30 Jun 2012 15:37:58 +0200 strongswan (4.6.4-1) experimental; urgency=low * New upstream release. closes: #664190 - stop including individual glib headers. closes: #665612 * debian/patches: - drop all patches, they're all included upstream now. * debian/*.install: - drop destination path - libs are in ipsec folder now - add libradius, libtls, libtnccs and libsimaka to libstrongswan. - add tnc-tnccs, pkcs8 and cmac plugins to libstrongswan. - use multiarch paths - move ldap, curl, kernel-netlink and attr* plugins to libstrongswan, since they are used by pluto too. closes: #611846 * debian/control: - add myself to uploaders, in hope that some others will join. - update standards version to 3.9.3. - add depend on adduser to strongswan-starter for use in maintainer scripts. - update debhelper build-dep to 9 and add dpkg-dev 1.16.2 build-dep for hardening support. - make strongswan-nm linux-any and adjust network-manager-dev build-dep to only happen on linux arches. closes: #640928 * debian/compat bumped to 9. * debian/rules: - enable hardening flags with PIE and bindnow. - use multiarch paths. - inconditionnally enable network-manager. - switch to dh. - ignore plugins in dh_makeshlibs. - don't generate maintainer scripts snippets for init scripts, it's already handled (atlhough we might want to change that later) - stop bypassing dh_installdocs. - disable DES and Blowfish plugin as they are under a 4 clauses BSD-like license. * debian/libstrongswan.lintian-overrides, debian/libstrongswan-ikev2.lintian-overrides: - override warning for hardening flags, we do use them. * debian/patches: - 01_fix-manpages added, fix space in NAME section. - 02_add-LICENSE added, add the license file from upstream not yet present in tarball. * debian/copyright completely rewritten. -- Yves-Alexis Perez Fri, 29 Jun 2012 21:24:37 +0200 strongswan (4.5.2-1.5) unstable; urgency=low * Non-maintainer upload. * Fix "package must not include /var/lock/subsys": don't ship /var/lock/subsys but create it in the init script. (Closes: #667764) -- gregor herrmann Fri, 15 Jun 2012 16:21:27 +0200 strongswan (4.5.2-1.4) unstable; urgency=high * Non-maintainer upload by the Security Team. * debian/patches: - 0001-Fix-boolean-return-value-if-an-empty-RSA-signature-i added, backported from upstream. Fix CVE-2012-2388 (when using gmp plugin, zero length RSA signatures are considered valid). - 0001-Added-support-for-the-resolvconf-framework-in-resolv added, correctly handle resolvconf-managed /etc/resolv.conf. closes: #664873 -- Yves-Alexis Perez Thu, 24 May 2012 17:55:51 +0200 strongswan (4.5.2-1.3) unstable; urgency=low * Non-maintainer upload. * Fix pending l10n issues. Debconf translations: - Dutch; (Jeroen Schot). Closes: #631502 - Norwegian Bokmål, (Bjørn Steensrud). Closes: #654411 - Polish (Michał Kułach). Closes: #658125 -- Christian Perrier Wed, 08 Feb 2012 07:22:07 +0100 strongswan (4.5.2-1.2) unstable; urgency=low * Non-maintainer upload. * Drop libopensc2-dev from Build-Depends; that library is now private to opensc and is not required at build time as it's loaded by dlopen() anyway. (Closes: #635890) -- Laurent Bigonville Thu, 08 Sep 2011 16:50:11 +0200 strongswan (4.5.2-1.1) unstable; urgency=low * Non-maintainer upload. * debian/strongswan-starter.ipsec.init: Init script should depends on remote_fs instead of local_fs, also provide ipsec instead of vpn as the other ipsec implementations (Closes: #629675) * debian/patches/0001-fix-fprintf-format.patch: Fix FTBFS with gcc 4.6, taken from upstream (Closes: #614486) * debian/control: Tighten dependency version against libstrongswan (Closes: #626170) * debian/strongswan-starter.lintian-overrides, debian/rules: Correctly set restricted permissions on /etc/ipsec.d/private/ and /var/lib/strongswan (Closes: #598827) -- Laurent Bigonville Mon, 04 Jul 2011 10:58:59 +0200 strongswan (4.5.2-1) unstable; urgency=low * New upstream version 4.5.2. This removes a lot of old manpages that were not properly updated since freeswan. Closes: #616482: strongswan-ikev1: virtual ips not released if xauth name does not match id Closes: #626169: strongswan: ipsec tunnels fail because charon segfaults Closes: #625228: strongswan-starter: left-/rightnexthop options are broken Closes: #614105: strongswan-ikev2: charon continually respawns * Fix typo in debian/rules that precluded --enable-nm from being passed to configure (LP: #771778). Closes: #627775: strongswan-nm package is missing nm module * Make sure to install all newly added plugins (and generally files created by make install) by calling dh_install with --fail-missing. Install some newly enabled crypto plugins in the libstrongswan package. Closes: #627783: Please disable modules that are not installed in package at build time -- Rene Mayrhofer Thu, 19 May 2011 13:42:21 +0200 strongswan (4.5.1-1) unstable; urgency=low * New upstream version -- Rene Mayrhofer Sat, 05 Mar 2011 09:27:49 +0100 strongswan (4.5.0-1) unstable; urgency=low * New upstream version 4.5.0 * Enabled new configure options for additional libstrongswan plugins: --enable-ctr --enable-ccm --enable-gcm --enable-addrblock --enable-led --enable-pkcs11 --enable-eap-tls --enable-eap-ttls --enable-eap-tnc * Enable NAT-Traversal with transport mode support so that strongswan can be used for an L2TP/IPsec gateway (e.g. for Windows or mobile phone clients). * Special handling for strongswan-nm package during build time: only build and install if headers are really available. This supports easier backporting by simply ignoring build-deps and therefore to build all packages except the strongswan-nm without any changes to the source package. * Install test-vectors and revocation plugins for libstrongswan. Closes: #600996: strongswan-starter: plugin 'revocation' failed to load * Acknowledge translations NMU. Closes: #598925: Intent to NMU or help for an l10n upload of strongswan to fix pending po-debconf l10n bugs Closes: #598925 #599888 #600354 #600409 #602449 #603723 #603779 * Update Brazilian Portugese debconf translation. Closes: #607404: strongswan: [INTL:pt_BR] Brazilian Portuguese debconf templates translation -- Rene Mayrhofer Sun, 28 Nov 2010 13:09:42 +0100 strongswan (4.4.1-5.1) unstable; urgency=low * Non-maintainer upload. - Fix pending l10n issues. Debconf translations: - Vietnamese (Clytie Siddall). Closes: #598925 - Japanese (Hideki Yamane). Closes: #599888 - Czech (Miroslav Kure). Closes: #600354 - Spanish (Francisco Javier Cuadrado). Closes: #600409 - Danish (Joe Hansen). Closes: #602449 - Basque (Iñaki Larrañaga Murgoitio). Closes: #603723 - Italian (Vincenzo Campanella). Closes: #603779 -- Christian Perrier Wed, 17 Nov 2010 20:21:21 +0100 strongswan (4.4.1-5) unstable; urgency=medium * Fixed init script for restart to work when either pluto or charon are not installed. Closes: #598074: init script doesn't re-start the service on restart * Enable built-in crypto test vectors. Closes: #598136: strongswan: Please enable --enable-test-vectors configure option * Install libchecksum.so into correct directory (/usr/lib/ipsec instead of /usr/lib). It still doesn't fix #598138 because of the size mismatch. -- Rene Mayrhofer Sun, 26 Sep 2010 13:48:00 +0200 strongswan (4.4.1-4) unstable; urgency=medium * dh_clean should not be called by the install target. This caused the arch: all package strongswan to be built but not included in the changes file. Closes: #593768: strongswan: 4.4.1 unavailable in testing notwhistanding a freeze-exception request * Rewrote parts of the init.d script to make stop/restart more robust when pluto or charon fail. * Closes: #595885: strongswan: FTBFS in squeeze: No package 'libnm_glib_vpn' found This bug was actually closed in 4.4.0 with changed dependencies. -- Rene Mayrhofer Thu, 19 Sep 2010 13:08:36 +0200 strongswan (4.4.1-3) unstable; urgency=low * Change make clean to make distclean to make package building idempotent. Really closes: Bug#593313: strongswan: FTBFS because clean rule fails -- Rene Mayrhofer Sun, 22 Aug 2010 21:39:03 +0200 strongswan (4.4.1-2) unstable; urgency=low * Recompiled with dpkg-buildpackage instead of svn-buildpackage to make the clean target work. I am still looking for the root cause of this quilt 3.0 format and svn-buildpackage incompatibility. Closes: Bug#593313: strongswan: FTBFS because clean rule fails * Removed the --enable-socket-* configure options again. Having multiple socket variants for charon would force to explicitly enable one (in case of pluto co-existance the socket-raw) in strongswan.conf. Disabling the other variants for now at build-time relieves us from changing the default config file and might be more future-proof concerning future upstream changes to configure options. Really closes: #587583 -- Rene Mayrhofer Sat, 21 Aug 2010 23:28:47 +0200 strongswan (4.4.1-1) unstable; urgency=low * New upstream release. Closes: #587583: strongswan 4.4.0-2 does not work here: charon seems not to ignore all incoming requests/answers Closes: #506320: strongswan: include directives error and ikev2 * Fix typo in debconf templates. Closes: #587564: strongswan: Minor typos in Debconf template * Updated debconf translations. Closes: #587562: strongswan: [INTL:de] updated German debconf translation Closes: #580954: [INTL:es] Spanish debconf template translation for strongswan -- Rene Mayrhofer Mon, 09 Aug 2010 11:37:25 +0200 strongswan (4.4.0-3) unstable; urgency=low * Updated debconf translations. Closes: #587562: strongswan: [INTL:de] updated German debconf translation -- Rene Mayrhofer Wed, 30 Jun 2010 09:50:31 +0200 strongswan (4.4.0-2) unstable; urgency=low * Force enable-socket-raw configure option and enable list-missing option for dh_install to make sure that all required plugins get built and installed. Closes: #587282: plugins missing * Updated debconf translations. Closes: #587052: strongswan: [INTL:fr] French debconf templates translation update Closes: #587159: strongswan: [INTL:ru] Russian debconf templates translation update Closes: #587255: strongswan: [INTL:pt] Updated Portuguese translation for debconf messages Closes: #587241: [INTL:sv] po-debconf file for strongswan * Disabled cisco-quirks configure option, as it causes pluto to emit a bogus Cicso vendor ID attribute. Some Cicso VPN clients might not work without this, but it is less confusing for standards-compliant remote gateways. * Removed leftover attribute plugin source caused by incomplete svn-upgrade call. -- Rene Mayrhofer Thu, 24 Jun 2010 22:32:18 +0200 strongswan (4.4.0-1) unstable; urgency=HIGH * New upstream release, now with a high-availability plugin. * Added patch to fix snprintf bug. * Enable building of ha, dhcp, and farp plugins. * Enable capability dropping (now depends on libcap). Switching user to new system user strongswan (with nogroup) after startup is still disabled until the iptables updown script can be made to work. -- Rene Mayrhofer Tue, 25 May 2010 21:03:52 +0200 strongswan (4.3.6-1) unstable; urgency=low * UNRELEASED * New upstream release, now build-depends on gperf. Closes: #577855: New upstream release 4.3.6 Closes: #569553: strongswan: Certificates CNs containing email address OIDs are not correctly parsed Closes: #557635: strongswan charon does not rekey forever Closes: #569299: Please update configure check to use new nm-glib pkgconfig file name * Switch to dpkg-source 3.0 (quilt) format * Synchronize debconf handling with current openswan 2.6.25 package to keep X509 certificate handling etc. similar. Thanks to Harald Jenny for implementing these changes in openswan, which I just converted to strongswan. * Now also build a strongswan-dbg package to ship debugging symbols. * Include attr plugin in strongswan-ikev2 package. Thanks to Christoph Lukas for pointing out that this was missing. Closes: #569550: strongswan: Please include attr plugin -- Rene Mayrhofer Tue, 23 Feb 2010 10:39:21 +0000 strongswan (4.3.4-1) unstable; urgency=low * New upstream release. * This release supports integrity checking of libraries, which is now enabled at build-time and can be enabled at run-time using libstrongswan { integrity_test = yes } in /etc/strongswan.conf. * Don't disable internal crypto libraries for pluto. They might be required when working with older ipsec.conf files. * charon now supports "include" directives in ipsec.secrets for compatibility with how the maintainer script includes RSA private keys. * Patched starter to also look at routing table "default" when table "main" doesn't have a default entry. This makes dealing with "%defaulroute" in ipsec.conf more flexible. Update: It seems Astaro was quicker then me sending a patch with exactly that aim to upstream. Now applied this one, which will be part of future upstream releases and uses netlink to read routing tables. -- Rene Mayrhofer Wed, 21 Oct 2009 11:14:56 +0000 strongswan (4.3.2-1) unstable; urgency=HIGH Urgency high because of security issue and FTBFS. * New upstream release, fixes security bug. * Fix padlock handling for i386 in debian/rules. Closes: #525652 (FTBFS on i386) * Acknowledge NMUs by security team. Closes: #533837, #531612 * Add "Conflicts: strongswan (< 4.2.12-1)" to libstrongswan, strongswan-starter, strongswan-ikev1, and strongswan-ikev2 to force update of the strongswan package on installation and avoid conflicts caused by package restructuring. Closes: #526037: strongswan-ikev2 and strongswan: error when trying to install together Closes: #526486: strongswan and libstrongswan: error when trying to install together Closes: #526487: strongswan-ikev1 and strongswan: error when trying to install together Closes: #526488: strongswan-starter and strongswan: error when trying to install together * Debconf templates and debian/control reviewed by the debian-l10n- english team as part of the Smith review project. Closes: #528073 * Debconf translation updates: Closes: #525234: [INTL:ja] Update po-debconf template translation (ja.po) Closes: #528323: [INTL:sv] po-debconf file for strongswan Closes: #528370: [INTL:vi] Vietnamese debconf templates translation update Closes: #529027: [INTL:pt] Updated Portuguese translation for debconf messages Closes: #529071: [INTL:fr] French debconf templates translation update Closes: #529592: nb translation of debconf PO for strongSWAN Closes: #529638: [INTL:ru] Russian debconf templates translation Closes: #529661: Updated Czech translation of strongswan debconf messages Closes: #529742: [INTL:eu] strongswan debconf basque translation Closes: #530273: [INTL:fi] Finnish translation of the debconf templates Closes: #529063: [INTL:gl] strongswan 4.2.14-2 debconf translation update -- Rene Mayrhofer Sat, 18 Apr 2009 20:28:51 +0200 strongswan (4.2.14-1.2) unstable; urgency=high * Non-maintainer upload. * Fix build on i386 Closes: #525652: FTBFS on i386: libstrongswan-padlock.so*': No such file or directory * Fix Two Denial of Service Vulnerabilities Closes: #533837: strongSwan Two Denial of Service Vulnerabilities -- Ruben Puettmann Sun, 21 Jun 2009 17:50:02 +0200 strongswan (4.2.14-1.1) unstable; urgency=high * Non-maintainer upload by the Security Team. * Fix two possible null pointer dereferences leading to denial of service via crafted IKE_SA_INIT, CREATE_CHILD_SA or IKE_AUTH request (CVE-2009-1957; CVE-2009-1958; Closes: #531612). -- Nico Golde Mon, 15 Jun 2009 13:06:05 +0200 strongswan (4.2.14-1) unstable; urgency=low * New upstream release, which incorporates the fix. Removed dpatch for it. Closes: #521950: CVE-2009-0790: DoS * New support for EAP RADIUS authentication, enabled for this package. -- Rene Mayrhofer Wed, 01 Apr 2009 22:17:52 +0200 strongswan (4.2.13-2) unstable; urgency=low * Fix DoS issue via malicious Dead Peer Detection packet. Thanks to the security team for providing the patch. Closes: #521950: CVE-2009-0790: DoS Gerd v. Egidy discovered that the Pluto IKE daemon in openswan is prone to a denial of service attack via a malicious packet. -- Rene Mayrhofer Tue, 31 Mar 2009 12:00:51 +0200 strongswan (4.2.13-1) unstable; urgency=low * New upstream release. This is now compatible with network-manager 0.7 in Debian, so start building the strongswan-side support. The actual plugin will need to be another source package. -- Rene Mayrhofer Sun, 22 Mar 2009 10:59:31 +0100 strongswan (4.2.12-1) unstable; urgency=low * New upstream release. Starting with this version, the strongswan packages is modularized and includes support for plugins like the NetworkManager plugin. Many details were adopted from Martin Willi's packages. * Dropping support for raw RSA public/private keypairs, as charon does not support it. * Explicitly remove directories /etc/ipsec.d and /var/run/pluto on purge. -- Rene Mayrhofer Sun, 01 Mar 2009 10:46:08 +0000 strongswan (4.2.9-1) unstable; urgency=low * New upstream release, fixes a MOBIKE issue. Closes: #507542: strongswan: endless loop * Explicitly enable compilation with libcurl for CRL fetching Closes: #497756: strongswan: not compiled with curl support; crl fetching not available * Enable compilation with SSH agent support. -- Rene Mayrhofer Fri, 05 Dec 2008 17:21:42 +0100 strongswan (4.2.4-5) unstable; urgency=high Reason for urgency high: this is potentially security relevant. * Patch backported from 4.2.7 to fix a potential DoS issue. Thanks to Thomas Kallenberg for the patch. -- Rene Mayrhofer Mon, 29 Sep 2008 10:35:30 +0200 strongswan (4.2.4-4) unstable; urgency=low * Tweaked configure options for lenny to remove somewhat experimental, incomplete, or unnecessary features. Removed --enable-xml, --enable-padlock, and --enable-manager and added --disable-aes, --disable-des, --disable-fips-prf, --disable-gmp, --disable-md5, --disable-sha1, and --disable-sha2 because openssl already contains this code, we depend on it and thus don't need it twice. Padlock support does not do much, because the bulk encryption uses it anyway (being done internally in the kernel) and using padlock for IKEv2 key agreement adds complexity for little gain. Thanks to Thomas Kallenberg of strongswan upstream team for suggesting these changes. The package is now noticable smaller. * Also remove dbus dependency, which is no longer necessary. -- Rene Mayrhofer Mon, 01 Sep 2008 08:59:10 +0200 strongswan (4.2.4-3) unstable; urgency=low * Changed configure option to build peer-to-peer service again. Closes: #494678: strongswan: configure option --enable-p2p changed to --enable-mediation -- Rene Mayrhofer Tue, 12 Aug 2008 20:08:26 +0200 strongswan (4.2.4-2) unstable; urgency=medium Urgency medium because this fixes an FTFBS bug on non-i386. * Only compile padlock crypto acceleration support for i386. Thanks for the patch! Closes: #492455: strongswan: FTBFS: Uses i386 assembler on non-i386 arches. * Updated Swedish debconf translation. Closes: #492902: [INTL:sv] po-debconf file for strongswan -- Rene Mayrhofer Thu, 07 Aug 2008 13:02:54 +0200 strongswan (4.2.4-1) unstable; urgency=medium Urgency medium because this new upstream versions no longer uses dbus and thus fixed the grave bug from the last Debian package. This version should transit to testing. * New upstream release. Starting with version 4.2.0, crypto algorithms have beeen modularized with existing code ported over. Among other improvments, this version now supports AES-CCM (e.g. with esp=aes128ccm12) and AES-GCM (e.g. with esp=aes256gcm16) starting with kernel 2.6.25 and enables dead peer detection by default. Note that charon (IKEv2) now uses the new /etc/strongswan.conf. * Enabled building of VIA Padlock and openssl crypto plugins. * Drop patch to rename AES_cbc_encrypt so as not to conflict with an openssl method of the same name. This has been applied upstream. * This new upstream version no longer uses dbus. Closes: #475098: charon needs dbus but strongswan does not depend on dbus Closes: #475099: charon does not work any more * This new upstream version no longer prints error messages in its init script. Closes: #465718: strongswan: startup on booting returns error messages * Apply patch to ipsec init script to fix bashism. Closes: #473703: strongswan: bashism in /bin/sh script * Updated Czech debconf translation. Closes: #480928: [l10n] Updated Czech translation of strongswan debconf messages -- Rene Mayrhofer Thu, 10 Jul 2008 14:40:43 +0200 strongswan (4.1.11-1) unstable; urgency=low * New upstream release. * DBUS support now interacts with network-manager, so need to build-depend on network-manager-dev. * The web interface has been improved and now requires libfcgi-dev and clearsilver-dev to compile, so build-depend on them. Also build-depend on libxml2-dev, libdbus-1-dev, libtool, and libsqlite3-dev (which were all build-deps before but were not listed explicitly so far - fix that). * Add patch to rename internal AES_cbc_encrypt function and thus avoid conflict with the openssl function. Closes: #470721: pluto segfaults when using pkcs11 library linked with OpenSSL -- Rene Mayrhofer Sun, 30 Mar 2008 10:35:16 +0200 strongswan (4.1.10-2) unstable; urgency=low * Enable new configure options: dbus, xml, nonblocking, thread, peer- to-peer NAT-traversal and the manager interface support. * Also set the default path to the opensc-pkcs11 engine explicitly. -- Rene Mayrhofer Fri, 15 Feb 2008 10:25:49 +0100 strongswan (4.1.10-1) unstable; urgency=low * New upstream release. Closes: #455711: New upstream version 4.1.9 * Updated Japanese debconf translation. Closes: #463321: strongswan: [INTL:ja] Update po-debconf template translation (ja.po) -- Rene Mayrhofer Thu, 07 Feb 2008 15:15:14 +0100 strongswan (4.1.8-3) unstable; urgency=low * Force use of hardening-wrapper when building the package by setting a Build-Dep to it and setting export DEB_BUILD_HARDENING=1 in debian/rules. -- Rene Mayrhofer Thu, 07 Feb 2008 14:14:48 +0100 strongswan (4.1.8-2) unstable; urgency=medium * Ship our own init script, since upstream no longer does. This is still installed as /etc/init.d/ipsec (and not /etc/init.d/strongswan) to be backwards compatible. Really closes: #442880: strongswan: postinst failure (missing /etc/init.d/ipsec) * Actually, need to be smarter with ipsec.conf and ipsec.secrets. Not marking them as conffiles isn't the right thing either. Instead, now use the includes feature to pull in config snippets that are modified by debconf. It's not perfect, though, as the IKEv1/IKEv2 protocols can't be enabled/disabled with includes. Therefore don't support this option in debconf for the time being, but default to enabled for both IKE versions. The files edited with debconf are kept under /var/lib/strongswan. * Cleanup debian/rules: no longer need to remove leftover files from patching, as currently there are no Debian-specific patches (fortunately). * More cleanup: drop debconf translations hack for woody compatibility, depend on build-stamp instead of build in the install-strongswan target, and remove the now unnecessary dh_clean -k call in install-strongswan so that configure shouldn't run twice during building the package. * Update French debconf translation. Closes: #448327: strongswan: [INTL:fr] French debconf templates translation update -- Rene Mayrhofer Fri, 02 Nov 2007 21:55:29 +0100 strongswan (4.1.8-1) unstable; urgency=low The "I'm back from my long semi-vacation, and strongswan is now bug-free again" release. * New upstream release. Closes: #442880: strongswan: postinst failure (missing /etc/init.d/ipsec) Closes: #431874: strongswan - FTBFS: cannot create regular file `/etc/ipsec.conf': Permission denied * Explicitly use debhalper compatbility version 5m now using debian/compat instead of DH_COMPAT. * Since there's no configurability in dh_installdeb's mania to flag everything below /etc as a conffile, now hack DEBIAN/conffiles directly to remove ipsec.conf and ipsec.secrets. Closes: #442929: strongswan: Maintainer script modifies conffiles * Add/update debconf translations. Closes: #432189: strongswan: [INTL:de] updated German debconf translation Closes: #432212: [l10n] Updated Czech translation of strongswan debconf messages Closes: #432642: strongswan: [INTL:fr] French debconf templates translation update Closes: #444710: strongswan: [INTL:pt] Updated Portuguese translation for debconf messages -- Rene Mayrhofer Fri, 26 Oct 2007 16:16:51 +0200 strongswan (4.1.4-1) unstable; urgency=low * New upstream release. * Fixed debconf descriptions. Closes: #431157: strongswan: Minor errors in Debconf template * Include Portugese and Closes: #415178: strongswan: [INTL:pt] Portuguese translation for debconf messages Closes: #431154: strongswan: [INTL:de] initial German debconf translation -- Rene Mayrhofer Thu, 05 Jul 2007 00:53:01 +0100 strongswan (4.1.3-1) unreleased; urgency=low * New upstream release. -- Rene Mayrhofer Sun, 03 Jun 2007 18:39:11 +0100 strongswan (4.1.1-1) unreleased; urgency=low Major new upstream release: * IKEv2 support with the new "charon" daemon in addition to the old "pluto" which is still used for IKEv1. * Switches to auto* tools build system. * The postinst script is still not quite as complete in updating the 2.8.x config automatically to a new 4.x config, but I don't want to wait any longer with the upload. It can be improved later on. -- Rene Mayrhofer Thu, 12 Apr 2007 21:33:56 +0100 strongswan (2.8.3-1) unstable; urgency=low * New upstream release with fixes for the SHA-512-HMAC function and added SHA-384 and SHA-2 implementations. -- Rene Mayrhofer Thu, 22 Feb 2007 20:19:45 +0000 strongswan (2.8.2-1) unstable; urgency=low * New upstream release with interoperability fixes for some VPN clients. -- Rene Mayrhofer Tue, 30 Jan 2007 12:21:20 +0000 strongswan (2.8.1+dfsg-1) unstable; urgency=low * New upstream release, now with XAUTH support. * Explicitly enable smartcard and vendorid options as well as a few more in debian/rules. Closes: #407449: strongswan: smartcard support is disabled -- Rene Mayrhofer Sun, 28 Jan 2007 21:06:25 +0000 strongswan (2.8.1-1) UNRELEASED; urgency=low * New upstream release. -- Rene Mayrhofer Sun, 28 Jan 2007 20:59:11 +0000 strongswan (2.8.0+dfsg-1) unstable; urgency=low * New upstream release. * Update debconf templates. Closes: #388672: strongswan: [INTL:fr] French debconf templates translation update Closes: #389253: [l10n] Updated Czech translation of strongswan debconf messages Closes: #391457: [INTL:nl] Updated dutch po-debconf translation Closes: #396179: strongswan: [INTL:ja] Updated Japanese po-debconf template translation (ja.po) * Fix broken reference to a now non-existing config file. no_oe.conf has been replaced by oe.conf, with the opposite meaning. Changed postinst to deal with it correctly now, and also try to convert older config file lines to newer (e.g. when updating from openswan to strongswan). Closes: #391565: fails to start : /etc/ipsec.conf:46: include files found no matches [/etc/ipsec.d/examples/no_oe.conf] -- Rene Mayrhofer Mon, 6 Nov 2006 19:01:58 +0000 strongswan (2.7.3+dfsg-1) unstable; urgency=low * New upstream release. Another try on getting it into unstable. Closes: #372267: ITP: strongswan -- second fork of freeswan. * Call debian-updatepo in the clean target, in line with the openswan change for its version 2.4.6+dfsg-1. * Remove man2html, htmldoc, and lynx from the Build-Deps because we no longer rebuild the documentation tree. * Starting shipping a lintian overrides file to finally silence the warnings about non-standard-(file|dir)-perms (they are intentional). * Clean up /usr/lib/ipsec somehow, again owing to lintian warnings. * Add po-debconf to build dependencies. -- Rene Mayrhofer Wed, 23 Aug 2006 21:23:36 +0100 strongswan (2.7.2+dfsg-1) unstable; urgency=low * First upload to the main Debian archive. This does no longer build the linux-patch-strongswan and strongswan-modules-source packages, as KLIPS will be removed from the strongswan upstream source anyway for the next major release. However, the openswan KLIPS could should be interoperable with strongswan user space. Closes: #372267: ITP: strongswan -- second fork of freeswan. * This upload removes the draft RFCs, as they are not considered free under the DFSG. -- Rene Mayrhofer Sun, 9 Jul 2006 12:40:34 +0100 strongswan (2.7.2-1) unstable; urgency=low * New upstream release. This release fixes a potential DoS problem. -- Rene Mayrhofer Mon, 26 Jun 2006 12:34:43 +0100 strongswan (2.7.0-1) unstable; urgency=low * Initial Debian packaging of strongswan. This is directly based on my Debian package of openswan 2.4.5-3. * Do not compile and ship fswcert right now, because it is not included in strongswan upstream. If it turns out to be necessary for supporting easy-to-use OE in the future (i.e. for generating the DNS format for the public keys from generated X.509 certificates), I will re-add it to the Debian package. * Also disabled my patches to use /etc/default instead of /etc/sysconfig for now. Something like that will be necessary in the future, but those parts of strongswan differ significanty from openswan. -- Rene Mayrhofer Mon, 22 May 2006 07:37:00 +0100