/* * Copyright (C) 2006-2017 Tobias Brunner * Copyright (C) 2005-2009 Martin Willi * Copyright (C) 2006 Daniel Roethlisberger * Copyright (C) 2005 Jan Hutter * Hochschule fuer Technik Rapperswil * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. See . * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. */ /* * Copyright (C) 2016 secunet Security Networks AG * Copyright (C) 2016 Thomas Egerer * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ /** * @defgroup libcharon libcharon * * @defgroup attributes attributes * @ingroup libcharon * * @defgroup bus bus * @ingroup libcharon * * @defgroup listeners listeners * @ingroup bus * * @defgroup config config * @ingroup libcharon * * @defgroup control control * @ingroup libcharon * * @defgroup encoding encoding * @ingroup libcharon * * @defgroup payloads payloads * @ingroup encoding * * @defgroup kernel kernel * @ingroup libcharon * * @defgroup network network * @ingroup libcharon * * @defgroup cplugins plugins * @ingroup libcharon * * @defgroup cprocessing processing * @ingroup libcharon * * @defgroup cjobs jobs * @ingroup cprocessing * * @defgroup sa sa * @ingroup libcharon * * @defgroup ikev1 ikev1 * @ingroup sa * * @defgroup ikev2 ikev2 * @ingroup sa * * @defgroup authenticators_v1 authenticators * @ingroup ikev1 * * @defgroup authenticators_v2 authenticators * @ingroup ikev2 * * @defgroup eap eap * @ingroup sa * * @defgroup xauth xauth * @ingroup sa * * @defgroup tasks_v1 tasks * @ingroup ikev1 * * @defgroup tasks_v2 tasks * @ingroup ikev2 * * @addtogroup libcharon * @{ * * IKEv2 keying daemon. * * All IKEv2 stuff is handled in charon. It uses a newer and more flexible * architecture than pluto. Charon uses a thread-pool (called processor), * which allows parallel execution SA-management. All threads originate * from the processor. Work is delegated to the processor by queueing jobs * to it. @verbatim +---------------------------------+ +----------------------------+ | controller | | config | +---------------------------------+ +----------------------------+ | | | ^ ^ ^ V V V | | | +----------+ +-----------+ +------+ +----------+ +----+ | receiver | | | | | +------+ | CHILD_SA | | K | +---+------+ | Scheduler | | IKE- | | IKE- |--+----------+ | e | | | | | SA |--| SA | | CHILD_SA | | r | +------+---+ +-----------+ | | +------+ +----------+ | n | <->| socket | | | Man- | | e | +------+---+ +-----------+ | ager | +------+ +----------+ | l | | | | | | | IKE- |--| CHILD_SA | | - | +---+------+ | Processor |---| |--| SA | +----------+ | I | | sender | | | | | +------+ | f | +----------+ +-----------+ +------+ +----+ | | | | | | V V V V V V +---------------------------------+ +----------------------------+ | Bus | | credentials | +---------------------------------+ +----------------------------+ @endverbatim * The scheduler is responsible to execute timed events. Jobs may be queued to * the scheduler to get executed at a defined time (e.g. rekeying). The * scheduler does not execute the jobs itself, it queues them to the processor. * * The IKE_SA manager managers all IKE_SA. It further handles the * synchronization: * Each IKE_SA must be checked out strictly and checked in again after use. The * manager guarantees that only one thread may check out a single IKE_SA. This * allows us to write the (complex) IKE_SAs routines non-threadsave. * The IKE_SA contain the state and the logic of each IKE_SA and handle the * messages. * * The CHILD_SA contains state about a IPsec security association and manages * them. An IKE_SA may have multiple CHILD_SAs. Communication to the kernel * takes place here through the kernel interface. * * The kernel interface installs IPsec security associations, policies, routes * and virtual addresses. It further provides methods to enumerate interfaces * and may notify the daemon about state changes at lower layers. * * The bus receives signals from the different threads and relays them to * interested listeners. Debugging signals, but also important state changes or * error messages are sent over the bus. * Its listeners are not only for logging, but also to track the state of an * IKE_SA. * * The controller, credential_manager, bus and backend_manager (config) are * places where a plugin ca register itself to provide information or observe * and control the daemon. */ #ifndef DAEMON_H_ #define DAEMON_H_ typedef struct daemon_t daemon_t; #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef ME #include #include #endif /* ME */ /** * Number of threads in the thread pool, if not specified in config. */ #define DEFAULT_THREADS 16 /** * Primary UDP port used by IKE. */ #define IKEV2_UDP_PORT 500 /** * UDP port defined for use in case a NAT is detected. */ #define IKEV2_NATT_PORT 4500 /** * UDP port on which the daemon will listen for incoming traffic (also used as * source port for outgoing traffic). */ #ifndef CHARON_UDP_PORT #define CHARON_UDP_PORT IKEV2_UDP_PORT #endif /** * UDP port used by the daemon in case a NAT is detected. */ #ifndef CHARON_NATT_PORT #define CHARON_NATT_PORT IKEV2_NATT_PORT #endif /** * Main class of daemon, contains some globals. */ struct daemon_t { /** * Socket manager instance */ socket_manager_t *socket; /** * Kernel interface to communicate with kernel */ kernel_interface_t *kernel; /** * A ike_sa_manager_t instance. */ ike_sa_manager_t *ike_sa_manager; /** * A child_sa_manager_t instance. */ child_sa_manager_t *child_sa_manager; /** * Manager for triggering policies, called traps */ trap_manager_t *traps; /** * Manager for shunt PASS|DROP policies */ shunt_manager_t *shunts; /** * Manager for IKE redirect providers */ redirect_manager_t *redirect; /** * Manager for the different configuration backends. */ backend_manager_t *backends; /** * The Sender-Thread. */ sender_t *sender; /** * The Receiver-Thread. */ receiver_t *receiver; /** * Manager for IKE configuration attributes */ attribute_manager_t *attributes; /** * The signaling bus. */ bus_t *bus; /** * Controller to control the daemon */ controller_t *controller; /** * EAP manager to maintain registered EAP methods */ eap_manager_t *eap; /** * XAuth manager to maintain registered XAuth methods */ xauth_manager_t *xauth; #ifdef ME /** * Connect manager */ connect_manager_t *connect_manager; /** * Mediation manager */ mediation_manager_t *mediation_manager; #endif /* ME */ /** * Initialize the daemon. * * @param plugins list of plugins to load * @return TRUE, if successful */ bool (*initialize)(daemon_t *this, char *plugins); /** * Starts the daemon, i.e. spawns the threads of the thread pool. */ void (*start)(daemon_t *this); /** * Load/Reload loggers defined in strongswan.conf * * If none are defined in strongswan.conf default loggers configured via * set_default_loggers() are loaded. */ void (*load_loggers)(daemon_t *this); /** * Configure default loggers if none are defined in strongswan.conf * * @param levels debug levels used to create default loggers if none are * defined in strongswan.conf (NULL to disable) * @param to_stderr TRUE to log to stderr/stdout if no loggers are defined * in strongswan.conf (logging to syslog is always enabled) */ void (*set_default_loggers)(daemon_t *this, level_t levels[DBG_MAX], bool to_stderr); /** * Set the log level for the given log group for all loaded loggers. * * This change is not persistent and gets reset if loggers are reloaded * via load_loggers(). * * @param group log group * @param level log level */ void (*set_level)(daemon_t *this, debug_t group, level_t level); }; /** * The one and only instance of the daemon. * * Set between libcharon_init() and libcharon_deinit() calls. */ extern daemon_t *charon; /** * Initialize libcharon and create the "charon" instance of daemon_t. * * This function initializes the bus, listeners can be registered before * calling initialize(). * * libcharon_init() may be called multiple times in a single process, but each * caller must call libcharon_deinit() for each call to libcharon_init(). * * @return FALSE if integrity check failed */ bool libcharon_init(); /** * Deinitialize libcharon and destroy the "charon" instance of daemon_t. */ void libcharon_deinit(); /** * Register a custom logger constructor. * * To be called from __attribute__((constructor)) functions. * * @param name name of the logger (also used for loglevel config) * @param constructor constructor to create custom logger */ void register_custom_logger(char *name, custom_logger_constructor_t constructor); #endif /** DAEMON_H_ @}*/