diff options
Diffstat (limited to 'plugins/modules/vyos_interfaces.py')
| -rw-r--r-- | plugins/modules/vyos_interfaces.py | 256 |
1 files changed, 249 insertions, 7 deletions
diff --git a/plugins/modules/vyos_interfaces.py b/plugins/modules/vyos_interfaces.py index 93df4e46..e2186e87 100644 --- a/plugins/modules/vyos_interfaces.py +++ b/plugins/modules/vyos_interfaces.py @@ -37,7 +37,7 @@ ANSIBLE_METADATA = { } DOCUMENTATION = """module: vyos_interfaces -short_description: Manages interface attributes of VyOS network devices. +short_description: Manages attributes of interfaces for VyOS - interfaces resource module description: - This module manages the interface attributes on VyOS network devices. - This module supports managing base attributes of Ethernet, Bonding, VXLAN, Loopback @@ -45,7 +45,9 @@ description: notes: - Tested against VyOS 1.1.8 (helium). - This module works with connection C(network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). -author: Nilashish Chakraborty (@nilashishc) +author: +- Nilashish Chakraborty (@nilashishc) +- Rohit Thakur (@rohitthakur2590) options: config: description: The provided interfaces configuration. @@ -119,6 +121,14 @@ options: - MTU for the virtual sub-interface. - Refer to vendor documentation for valid values. type: int + running_config: + description: + - This option is used only with state I(parsed). + - The value of this option should be the output received from the VyOS device by executing + the command B(show configuration commands | grep interfaces). + - The state I(parsed) reads the configuration from C(running_config) option and transforms + it into Ansible structured data as per the resource module's argspec and the value is then + returned in the I(parsed) key within the result. state: description: - The state of the configuration after module completion. @@ -128,6 +138,9 @@ options: - replaced - overridden - deleted + - rendered + - gathered + - parsed default: merged """ EXAMPLES = """ @@ -152,7 +165,7 @@ EXAMPLES = """ # set interfaces loopback lo - name: Merge provided configuration with device configuration - vyos_interfaces: + vyos.vyos.vyos_interfaces: config: - name: eth2 description: 'Configured by Ansible' @@ -330,7 +343,7 @@ EXAMPLES = """ # # - name: Replace device configurations of listed interfaces with provided configurations - vyos_interfaces: + vyos.vyos.vyos_interfaces: config: - name: eth2 description: "Replaced by Ansible" @@ -515,7 +528,7 @@ EXAMPLES = """ # # - name: Overrides all device configuration with provided configuration - vyos_interfaces: + vyos.vyos.vyos_interfaces: config: - name: eth0 description: Outbound Interface For The Appliance @@ -700,7 +713,7 @@ EXAMPLES = """ # # - name: Delete attributes of given interfaces (Note - This won't delete the interfaces themselves) - vyos_interfaces: + vyos.vyos.vyos_interfaces: config: - name: bond1 @@ -838,6 +851,224 @@ EXAMPLES = """ # set interfaces loopback lo # # + + +# Using gathered +# +# Before state: +# ------------- +# +# vyos@192# run show configuration commands | grep interfaces +# set interfaces ethernet eth0 address 'dhcp' +# set interfaces ethernet eth0 duplex 'auto' +# set interfaces ethernet eth0 hw-id '08:00:27:50:5e:19' +# set interfaces ethernet eth0 smp_affinity 'auto' +# set interfaces ethernet eth0 speed 'auto' +# set interfaces ethernet eth1 description 'Configured by Ansible' +# set interfaces ethernet eth1 duplex 'auto' +# set interfaces ethernet eth1 mtu '1500' +# set interfaces ethernet eth1 speed 'auto' +# set interfaces ethernet eth1 vif 200 description 'VIF - 200' +# set interfaces ethernet eth2 description 'Configured by Ansible' +# set interfaces ethernet eth2 duplex 'auto' +# set interfaces ethernet eth2 mtu '1500' +# set interfaces ethernet eth2 speed 'auto' +# set interfaces ethernet eth2 vif 200 description 'VIF - 200' +# +- name: Gather listed interfaces with provided configurations + vyos.vyos.vyos_interfaces: + config: + state: gathered +# +# +# ------------------------- +# Module Execution Result +# ------------------------- +# +# "gathered": [ +# { +# "description": "Configured by Ansible", +# "duplex": "auto", +# "enabled": true, +# "mtu": 1500, +# "name": "eth2", +# "speed": "auto", +# "vifs": [ +# { +# "description": "VIF - 200", +# "enabled": true, +# "vlan_id": 200 +# } +# ] +# }, +# { +# "description": "Configured by Ansible", +# "duplex": "auto", +# "enabled": true, +# "mtu": 1500, +# "name": "eth1", +# "speed": "auto", +# "vifs": [ +# { +# "description": "VIF - 200", +# "enabled": true, +# "vlan_id": 200 +# } +# ] +# }, +# { +# "duplex": "auto", +# "enabled": true, +# "name": "eth0", +# "speed": "auto" +# } +# ] +# +# +# After state: +# ------------- +# +# vyos@192# run show configuration commands | grep interfaces +# set interfaces ethernet eth0 address 'dhcp' +# set interfaces ethernet eth0 duplex 'auto' +# set interfaces ethernet eth0 hw-id '08:00:27:50:5e:19' +# set interfaces ethernet eth0 smp_affinity 'auto' +# set interfaces ethernet eth0 speed 'auto' +# set interfaces ethernet eth1 description 'Configured by Ansible' +# set interfaces ethernet eth1 duplex 'auto' +# set interfaces ethernet eth1 mtu '1500' +# set interfaces ethernet eth1 speed 'auto' +# set interfaces ethernet eth1 vif 200 description 'VIF - 200' +# set interfaces ethernet eth2 description 'Configured by Ansible' +# set interfaces ethernet eth2 duplex 'auto' +# set interfaces ethernet eth2 mtu '1500' +# set interfaces ethernet eth2 speed 'auto' +# set interfaces ethernet eth2 vif 200 description 'VIF - 200' + + +# Using rendered +# +# +- name: Render the commands for provided configuration + vyos.vyos.vyos_interfaces: + config: + - name: eth0 + enabled: true + duplex: auto + speed: auto + - name: eth1 + description: Configured by Ansible - Interface 1 + mtu: 1500 + speed: auto + duplex: auto + enabled: true + vifs: + - vlan_id: 100 + description: Eth1 - VIF 100 + mtu: 400 + enabled: true + - vlan_id: 101 + description: Eth1 - VIF 101 + enabled: true + - name: eth2 + description: Configured by Ansible - Interface 2 (ADMIN DOWN) + mtu: 600 + enabled: false + state: rendered +# +# +# ------------------------- +# Module Execution Result +# ------------------------- +# +# +# "rendered": [ +# "set interfaces ethernet eth0 duplex 'auto'", +# "set interfaces ethernet eth0 speed 'auto'", +# "delete interfaces ethernet eth0 disable", +# "set interfaces ethernet eth1 duplex 'auto'", +# "delete interfaces ethernet eth1 disable", +# "set interfaces ethernet eth1 speed 'auto'", +# "set interfaces ethernet eth1 description 'Configured by Ansible - Interface 1'", +# "set interfaces ethernet eth1 mtu '1500'", +# "set interfaces ethernet eth1 vif 100 description 'Eth1 - VIF 100'", +# "set interfaces ethernet eth1 vif 100 mtu '400'", +# "set interfaces ethernet eth1 vif 101 description 'Eth1 - VIF 101'", +# "set interfaces ethernet eth2 disable", +# "set interfaces ethernet eth2 description 'Configured by Ansible - Interface 2 (ADMIN DOWN)'", +# "set interfaces ethernet eth2 mtu '600'" +# ] + + +# Using parsed +# +# +- name: Parse the configuration. + vyos.vyos.vyos_interfaces: + running_config: + "set interfaces ethernet eth0 address 'dhcp' + set interfaces ethernet eth0 duplex 'auto' + set interfaces ethernet eth0 hw-id '08:00:27:50:5e:19' + set interfaces ethernet eth0 smp_affinity 'auto' + set interfaces ethernet eth0 speed 'auto' + set interfaces ethernet eth1 description 'Configured by Ansible' + set interfaces ethernet eth1 duplex 'auto' + set interfaces ethernet eth1 mtu '1500' + set interfaces ethernet eth1 speed 'auto' + set interfaces ethernet eth1 vif 200 description 'VIF - 200' + set interfaces ethernet eth2 description 'Configured by Ansible' + set interfaces ethernet eth2 duplex 'auto' + set interfaces ethernet eth2 mtu '1500' + set interfaces ethernet eth2 speed 'auto' + set interfaces ethernet eth2 vif 200 description 'VIF - 200'" + state: parsed +# +# +# ------------------------- +# Module Execution Result +# ------------------------- +# +# +# "parsed": [ +# { +# "description": "Configured by Ansible", +# "duplex": "auto", +# "enabled": true, +# "mtu": 1500, +# "name": "eth2", +# "speed": "auto", +# "vifs": [ +# { +# "description": "VIF - 200", +# "enabled": true, +# "vlan_id": 200 +# } +# ] +# }, +# { +# "description": "Configured by Ansible", +# "duplex": "auto", +# "enabled": true, +# "mtu": 1500, +# "name": "eth1", +# "speed": "auto", +# "vifs": [ +# { +# "description": "VIF - 200", +# "enabled": true, +# "vlan_id": 200 +# } +# ] +# }, +# { +# "duplex": "auto", +# "enabled": true, +# "name": "eth0", +# "speed": "auto" +# } +# ] + + """ RETURN = """ before: @@ -879,8 +1110,19 @@ def main(): :returns: the result form module invocation """ + required_if = [ + ("state", "merged", ("config",)), + ("state", "replaced", ("config",)), + ("state", "rendered", ("config",)), + ("state", "overridden", ("config",)), + ("state", "parsed", ("running_config",)), + ] + mutually_exclusive = [("config", "running_config")] module = AnsibleModule( - argument_spec=InterfacesArgs.argument_spec, supports_check_mode=True + argument_spec=InterfacesArgs.argument_spec, + required_if=required_if, + supports_check_mode=True, + mutually_exclusive=mutually_exclusive, ) result = Interfaces(module).execute_module() |