.. _vyos.vyos.vyos_firewall_rules_module: ***************************** vyos.vyos.vyos_firewall_rules ***************************** **Firewall rules resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This module manages firewall rule-set attributes on VyOS devices Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
list / elements=dictionary
A dictionary of Firewall rule-set options.
afi
string / required
    Choices:
  • ipv4
  • ipv6
Specifies the type of rule-set.
rule_sets
list / elements=dictionary
The Firewall rule-set list.
default_action
string
    Choices:
  • drop
  • reject
  • accept
  • jump
Default action for rule-set.
drop (Drop if no prior rules are hit (default))
reject (Drop and notify source if no prior rules are hit)
accept (Accept if no prior rules are hit)
jump (Jump to another rule-set, 1.4+)
default_jump_target
string
Default jump target if the default action is jump.
Only valid in 1.4 and later.
Only valid when default_action = jump.
description
string
Rule set description.
enable_default_log
boolean
    Choices:
  • no
  • yes
Option to log packets hitting default-action.
filter
string
    Choices:
  • input
  • output
  • forward
Filter type (exclusive to "name").
Supported in 1.4 and later.
name
string
Firewall rule set name.
Required for 1.3- and optional for 1.4+.
rules
list / elements=dictionary
A dictionary that specifies the rule-set configurations.
action
string
    Choices:
  • drop
  • reject
  • accept
  • inspect
  • continue
  • return
  • jump
  • queue
  • synproxy
Specifying the action.
inspect is available < 1.4
continue, return, jump, queue, synproxy are available >= 1.4
description
string
Description of this rule.
destination
dictionary
Specifying the destination parameters.
address
string
Destination ip address subnet or range.
IPv4/6 address, subnet or range to match.
Match everything except the specified address, subnet or range.
Destination ip address subnet or range.
group
dictionary
Destination group.
address_group
string
Group of addresses.
network_group
string
Group of networks.
port_group
string
Group of ports.
port
string
Multiple destination ports can be specified as a comma-separated list.
The whole list can also be "negated" using '!'.
For example:'!22,telnet,http,123,1001-1005'.
disable
boolean
    Choices:
  • no
  • yes
Option to disable firewall rule.
aliased to disabled

aliases: disabled
fragment
string
    Choices:
  • match-frag
  • match-non-frag
IP fragment match.
icmp
dictionary
ICMP type and code information.
code
integer
ICMP code.
type
integer
ICMP type.
type_name
string
    Choices:
  • any
  • echo-reply
  • destination-unreachable
  • network-unreachable
  • host-unreachable
  • protocol-unreachable
  • port-unreachable
  • fragmentation-needed
  • source-route-failed
  • network-unknown
  • host-unknown
  • network-prohibited
  • host-prohibited
  • TOS-network-unreachable
  • TOS-host-unreachable
  • communication-prohibited
  • host-precedence-violation
  • precedence-cutoff
  • source-quench
  • redirect
  • network-redirect
  • host-redirect
  • TOS-network-redirect
  • TOS-host-redirect
  • echo-request
  • router-advertisement
  • router-solicitation
  • time-exceeded
  • ttl-zero-during-transit
  • ttl-zero-during-reassembly
  • parameter-problem
  • ip-header-bad
  • required-option-missing
  • timestamp-request
  • timestamp-reply
  • address-mask-request
  • address-mask-reply
  • ping
  • pong
  • ttl-exceeded
ICMP type-name.
inbound_interface
dictionary
Inbound interface.
Only valid in 1.4 and later.
group
string
Interface group.
name
string
Interface name.
Can have wildcards
ipsec
string
    Choices:
  • match-ipsec
  • match-none
  • match-ipsec-in
  • match-ipsec-out
  • match-none-in
  • match-none-out
Inbound ip sec packets.
VyOS 1.4 and older match-ipsec/match-none
VyOS 1.5 and later require -in/-out suffixes
jump_target
string
Jump target if the action is jump.
Only valid in 1.4 and later.
Only valid when action = jump.
limit
dictionary
Rate limit using a token bucket filter.
burst
integer
Maximum number of packets to allow in excess of rate.
rate
dictionary
format for rate (integer/time unit).
any one of second, minute, hour or day may be used to specify time unit.
eg. 1/second implies rule to be matched at an average of once per second.
number
integer
This is the integer value.
unit
string
This is the time unit.
log
string
    Choices:
  • disable
  • enable
Option to log packets matching rule.
number
integer / required
Rule number.
outbound_interface
dictionary
Match outbound interface.
Only valid in 1.4 and later.
group
string
Interface group.
name
string
Interface name.
Can have wildcards
p2p
list / elements=dictionary
P2P application packets.
application
string
    Choices:
  • all
  • applejuice
  • bittorrent
  • directconnect
  • edonkey
  • gnutella
  • kazaa
Name of the application.
packet_length
list / elements=dictionary
Packet length match.
Only valid in 1.4 and later.
Multiple values from 1 to 65535 and ranges are supported
length
string
Packet length or range.
packet_length_exclude
list / elements=dictionary
Packet length match.
Only valid in 1.4 and later.
Multiple values from 1 to 65535 and ranges are supported
length
string
Packet length or range.
packet_type
string
    Choices:
  • broadcast
  • multicast
  • host
  • other
Packet type match.
protocol
string
Protocol to match (protocol name in /etc/protocols or protocol number or all).
<text> IP protocol name from /etc/protocols (e.g. "tcp" or "udp").
<0-255> IP protocol number.
tcp_udp Both TCP and UDP.
all All IP protocols.
(!)All IP protocols except for the specified name or number.
queue
string
Queue options.
Only valid in 1.4 and later.
Only valid when action = queue.
Can be a queue number or range.
queue_options
string
    Choices:
  • bypass
  • fanout
Queue options.
Only valid in 1.4 and later.
Only valid when action = queue.
recent
dictionary
Parameters for matching recently seen sources.
count
integer
Source addresses seen more than N times.
time
string
Source addresses seen in the last N seconds.
Since 1.4, this is a string of second/minute/hour
source
dictionary
Source parameters.
address
string
Source ip address subnet or range.
IPv4/6 address, subnet or range to match.
Match everything except the specified address, subnet or range.
Source ip address subnet or range.
fqdn
string
Fully qualified domain name.
Available in 1.4 and later.
group
dictionary
Source group.
address_group
string
Group of addresses.
network_group
string
Group of networks.
port_group
string
Group of ports.
mac_address
string
<MAC address> MAC address to match.
<!MAC address> Match everything except the specified MAC address.
port
string
Multiple source ports can be specified as a comma-separated list.
The whole list can also be "negated" using '!'.
For example:'!22,telnet,http,123,1001-1005'.
state
dictionary
Session state.
established
boolean
    Choices:
  • no
  • yes
Established state.
invalid
boolean
    Choices:
  • no
  • yes
Invalid state.
new
boolean
    Choices:
  • no
  • yes
New state.
related
boolean
    Choices:
  • no
  • yes
Related state.
synproxy
dictionary
SYN proxy options.
Only valid in 1.4 and later.
Only valid when action = synproxy.
mss
integer
Adjust MSS (501-65535)
window_scale
integer
Window scale (1-14).
tcp
dictionary
TCP flags to match.
flags
list / elements=dictionary
list of tcp flags to be matched
5.0 breaking change to support 1.4+ and 1.3-
flag
string
    Choices:
  • ack
  • cwr
  • ecn
  • fin
  • psh
  • rst
  • syn
  • urg
  • all
TCP flag to be matched.
syn, ack, fin, rst, urg, psh, all (1.3-)
syn, ack, fin, rst, urg, psh, cwr, ecn (1.4+)
invert
boolean
    Choices:
  • no
  • yes
Invert the match.
time
dictionary
Time to match rule.
monthdays
string
Monthdays to match rule on.
startdate
string
Date to start matching rule.
starttime
string
Time of day to start matching rule.
stopdate
string
Date to stop matching rule.
stoptime
string
Time of day to stop matching rule.
utc
boolean
    Choices:
  • no
  • yes
Interpret times for startdate, stopdate, starttime and stoptime to be UTC.
weekdays
string
Weekdays to match rule on.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep firewall.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • gathered
  • rendered
  • parsed
The state the configuration should be left in

Notes ----- .. note:: - Tested against VyOS 1.3.8. - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. Examples -------- .. code-block:: yaml # Using deleted to delete firewall rules based on rule-set name # # Before state # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' # set firewall name Downlink default-action 'accept' # set firewall name Downlink description 'IPv4 INBOUND rule set' # set firewall name Downlink rule 501 action 'accept' # set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' # set firewall name Downlink rule 501 ipsec 'match-ipsec' # set firewall name Downlink rule 502 action 'reject' # set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' # set firewall name Downlink rule 502 ipsec 'match-ipsec' - name: Delete attributes of given firewall rules. vyos.vyos.vyos_firewall_rules: config: - afi: ipv4 rule_sets: - name: Downlink state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] # "commands": [ # "delete firewall name Downlink" # ] # # "after": [] # After state # ------------ # vyos@vyos# run show configuration commands | grep firewall # set firewall group address-group 'inbound' # Using deleted to delete firewall rules based on afi # # Before state # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall ipv6-name UPLINK default-action 'accept' # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' # set firewall ipv6-name UPLINK rule 1 action 'accept' # set firewall ipv6-name UPLINK rule 1 # set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' # set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' # set firewall ipv6-name UPLINK rule 2 action 'accept' # set firewall ipv6-name UPLINK rule 2 # set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' # set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' # set firewall group address-group 'inbound' # set firewall name Downlink default-action 'accept' # set firewall name Downlink description 'IPv4 INBOUND rule set' # set firewall name Downlink rule 501 action 'accept' # set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' # set firewall name Downlink rule 501 ipsec 'match-ipsec' # set firewall name Downlink rule 502 action 'reject' # set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' # set firewall name Downlink rule 502 ipsec 'match-ipsec' - name: Delete attributes of given firewall rules. vyos.vyos.vyos_firewall_rules: config: - afi: ipv4 state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] # "commands": [ # "delete firewall name" # ] # # "after": [] # After state # ------------ # vyos@vyos:~$ show configuration commands| grep firewall # set firewall ipv6-name UPLINK default-action 'accept' # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' # set firewall ipv6-name UPLINK rule 1 action 'accept' # set firewall ipv6-name UPLINK rule 1 # set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' # set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' # set firewall ipv6-name UPLINK rule 2 action 'accept' # set firewall ipv6-name UPLINK rule 2 # set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' # set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' # Using deleted to delete all the the firewall rules when provided config is empty # # Before state # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' # set firewall name Downlink default-action 'accept' # set firewall name Downlink description 'IPv4 INBOUND rule set' # set firewall name Downlink rule 501 action 'accept' # set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' # set firewall name Downlink rule 501 ipsec 'match-ipsec' # set firewall name Downlink rule 502 action 'reject' # set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' # set firewall name Downlink rule 502 ipsec 'match-ipsec' # - name: Delete attributes of given firewall rules. vyos.vyos.vyos_firewall_rules: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] # "commands": [ # "delete firewall name" # ] # # "after": [] # After state # ------------ # vyos@vyos# run show configuration commands | grep firewall # set firewall group address-group 'inbound' # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep firewall # set firewall group address-group 'inbound' # - name: Merge the provided configuration with the existing running configuration vyos.vyos.vyos_firewall_rules: config: - afi: ipv6 rule_sets: - name: UPLINK description: This is ipv6 specific rule-set default_action: accept rules: - number: 1 action: accept description: Fwipv6-Rule 1 is configured by Ansible ipsec: match-ipsec - number: 2 action: accept description: Fwipv6-Rule 2 is configured by Ansible ipsec: match-ipsec - afi: ipv4 rule_sets: - name: INBOUND description: IPv4 INBOUND rule set default_action: accept rules: - number: 101 action: accept description: Rule 101 is configured by Ansible ipsec: match-ipsec - number: 102 action: reject description: Rule 102 is configured by Ansible ipsec: match-ipsec - number: 103 action: accept description: Rule 103 is configured by Ansible destination: group: address_group: inbound source: address: 192.0.2.0 state: established: true new: false invalid: false related: true state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": [] # # "commands": [ # "set firewall ipv6-name UPLINK default-action 'accept'", # "set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'", # "set firewall ipv6-name UPLINK rule 1 action 'accept'", # "set firewall ipv6-name UPLINK rule 1", # "set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'", # "set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'", # "set firewall ipv6-name UPLINK rule 2 action 'accept'", # "set firewall ipv6-name UPLINK rule 2", # "set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'", # "set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'", # "set firewall name INBOUND default-action 'accept'", # "set firewall name INBOUND description 'IPv4 INBOUND rule set'", # "set firewall name INBOUND rule 101 action 'accept'", # "set firewall name INBOUND rule 101", # "set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'", # "set firewall name INBOUND rule 101 ipsec 'match-ipsec'", # "set firewall name INBOUND rule 102 action 'reject'", # "set firewall name INBOUND rule 102", # "set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'", # "set firewall name INBOUND rule 102 ipsec 'match-ipsec'", # "set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'", # "set firewall name INBOUND rule 103 destination group address-group inbound", # "set firewall name INBOUND rule 103", # "set firewall name INBOUND rule 103 source address 192.0.2.0", # "set firewall name INBOUND rule 103 state established enable", # "set firewall name INBOUND rule 103 state related enable", # "set firewall name INBOUND rule 103 state invalid disable", # "set firewall name INBOUND rule 103 state new disable", # "set firewall name INBOUND rule 103 action 'accept'" # ] # # "after": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 102 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 102 # }, # { # "action": "accept", # "description": "Rule 103 is configured by Ansible", # "destination": { # "group": { # "address_group": "inbound" # } # }, # "number": 103, # "source": { # "address": "192.0.2.0" # }, # "state": { # "established": true, # "invalid": false, # "new": false, # "related": true # } # } # ] # } # ] # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' # set firewall ipv6-name UPLINK default-action 'accept' # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' # set firewall ipv6-name UPLINK rule 1 action 'accept' # set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' # set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' # set firewall ipv6-name UPLINK rule 2 action 'accept' # set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' # set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' # set firewall name INBOUND default-action 'accept' # set firewall name INBOUND description 'IPv4 INBOUND rule set' # set firewall name INBOUND rule 101 action 'accept' # set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' # set firewall name INBOUND rule 101 ipsec 'match-ipsec' # set firewall name INBOUND rule 102 action 'reject' # set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible' # set firewall name INBOUND rule 102 ipsec 'match-ipsec' # set firewall name INBOUND rule 103 action 'accept' # set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible' # set firewall name INBOUND rule 103 destination group address-group 'inbound' # set firewall name INBOUND rule 103 source address '192.0.2.0' # set firewall name INBOUND rule 103 state established 'enable' # set firewall name INBOUND rule 103 state invalid 'disable' # set firewall name INBOUND rule 103 state new 'disable' # set firewall name INBOUND rule 103 state related 'enable' # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' # set firewall ipv6-name UPLINK default-action 'accept' # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' # set firewall ipv6-name UPLINK rule 1 action 'accept' # set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' # set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' # set firewall ipv6-name UPLINK rule 2 action 'accept' # set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' # set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' # set firewall name INBOUND default-action 'accept' # set firewall name INBOUND description 'IPv4 INBOUND rule set' # set firewall name INBOUND rule 101 action 'accept' # set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' # set firewall name INBOUND rule 101 ipsec 'match-ipsec' # set firewall name INBOUND rule 102 action 'reject' # set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible' # set firewall name INBOUND rule 102 ipsec 'match-ipsec' # set firewall name INBOUND rule 103 action 'accept' # set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible' # set firewall name INBOUND rule 103 destination group address-group 'inbound' # set firewall name INBOUND rule 103 source address '192.0.2.0' # set firewall name INBOUND rule 103 state established 'enable' # set firewall name INBOUND rule 103 state invalid 'disable' # set firewall name INBOUND rule 103 state new 'disable' # set firewall name INBOUND rule 103 state related 'enable' # - name: >- Replace device configurations of listed firewall rules with provided configurations vyos.vyos.vyos_firewall_rules: config: - afi: ipv6 rule_sets: - name: UPLINK description: This is ipv6 specific rule-set default_action: accept - afi: ipv4 rule_sets: - name: INBOUND description: IPv4 INBOUND rule set default_action: accept rules: - number: 101 action: accept description: Rule 101 is configured by Ansible ipsec: match-ipsec - number: 104 action: reject description: Rule 104 is configured by Ansible ipsec: match-none state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 102 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 102 # }, # { # "action": "accept", # "description": "Rule 103 is configured by Ansible", # "destination": { # "group": { # "address_group": "inbound" # } # }, # "number": 103, # "source": { # "address": "192.0.2.0" # }, # "state": { # "established": true, # "invalid": false, # "new": false, # "related": true # } # } # ] # } # ] # } # ] # # "commands": [ # "delete firewall ipv6-name UPLINK rule 1", # "delete firewall ipv6-name UPLINK rule 2", # "delete firewall name INBOUND rule 102", # "delete firewall name INBOUND rule 103", # "set firewall name INBOUND rule 104 action 'reject'", # "set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible'", # "set firewall name INBOUND rule 104", # "set firewall name INBOUND rule 104 ipsec 'match-none'" # ] # # "after": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK" # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 104 is configured by Ansible", # "ipsec": "match-none", # "number": 104 # } # ] # } # ] # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' # set firewall ipv6-name UPLINK default-action 'accept' # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' # set firewall name INBOUND default-action 'accept' # set firewall name INBOUND description 'IPv4 INBOUND rule set' # set firewall name INBOUND rule 101 action 'accept' # set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' # set firewall name INBOUND rule 101 ipsec 'match-ipsec' # set firewall name INBOUND rule 104 action 'reject' # set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible' # set firewall name INBOUND rule 104 ipsec 'match-none' # Using overridden # # Before state # -------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' # set firewall ipv6-name UPLINK default-action 'accept' # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' # set firewall name INBOUND default-action 'accept' # set firewall name INBOUND description 'IPv4 INBOUND rule set' # set firewall name INBOUND rule 101 action 'accept' # set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' # set firewall name INBOUND rule 101 ipsec 'match-ipsec' # set firewall name INBOUND rule 104 action 'reject' # set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible' # set firewall name INBOUND rule 104 ipsec 'match-none' # - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_firewall_rules: config: - afi: ipv4 rule_sets: - name: Downlink description: IPv4 INBOUND rule set default_action: accept rules: - number: 501 action: accept description: Rule 501 is configured by Ansible ipsec: match-ipsec - number: 502 action: reject description: Rule 502 is configured by Ansible ipsec: match-ipsec state: overridden # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK" # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 104 is configured by Ansible", # "ipsec": "match-none", # "number": 104 # } # ] # } # ] # } # ] # # "commands": [ # "delete firewall ipv6-name UPLINK", # "delete firewall name INBOUND", # "set firewall name Downlink default-action 'accept'", # "set firewall name Downlink description 'IPv4 INBOUND rule set'", # "set firewall name Downlink rule 501 action 'accept'", # "set firewall name Downlink rule 501", # "set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'", # "set firewall name Downlink rule 501 ipsec 'match-ipsec'", # "set firewall name Downlink rule 502 action 'reject'", # "set firewall name Downlink rule 502", # "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'", # "set firewall name Downlink rule 502 ipsec 'match-ipsec'" # # # "after": [ # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] # # # After state # ------------ # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' # set firewall name Downlink default-action 'accept' # set firewall name Downlink description 'IPv4 INBOUND rule set' # set firewall name Downlink rule 501 action 'accept' # set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' # set firewall name Downlink rule 501 ipsec 'match-ipsec' # set firewall name Downlink rule 502 action 'reject' # set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' # set firewall name Downlink rule 502 ipsec 'match-ipsec' # Using gathered # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' # set firewall ipv6-name UPLINK default-action 'accept' # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' # set firewall ipv6-name UPLINK rule 1 action 'accept' # set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' # set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' # set firewall ipv6-name UPLINK rule 2 action 'accept' # set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' # set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' # set firewall name INBOUND default-action 'accept' # set firewall name INBOUND description 'IPv4 INBOUND rule set' # set firewall name INBOUND rule 101 action 'accept' # set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' # set firewall name INBOUND rule 101 ipsec 'match-ipsec' # set firewall name INBOUND rule 102 action 'reject' # set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible' # set firewall name INBOUND rule 102 ipsec 'match-ipsec' # set firewall name INBOUND rule 103 action 'accept' # set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible' # set firewall name INBOUND rule 103 destination group address-group 'inbound' # set firewall name INBOUND rule 103 source address '192.0.2.0' # set firewall name INBOUND rule 103 state established 'enable' # set firewall name INBOUND rule 103 state invalid 'disable' # set firewall name INBOUND rule 103 state new 'disable' # set firewall name INBOUND rule 103 state related 'enable' # - name: Gather listed firewall rules with provided configurations vyos.vyos.vyos_firewall_rules: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": [ # { # "afi": "ipv6", # "rule_sets": [ # { # "default_action": "accept", # "description": "This is ipv6 specific rule-set", # "name": "UPLINK", # "rules": [ # { # "action": "accept", # "description": "Fwipv6-Rule 1 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 1 # }, # { # "action": "accept", # "description": "Fwipv6-Rule 2 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 2 # } # ] # } # ] # }, # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "INBOUND", # "rules": [ # { # "action": "accept", # "description": "Rule 101 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 101 # }, # { # "action": "reject", # "description": "Rule 102 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 102 # }, # { # "action": "accept", # "description": "Rule 103 is configured by Ansible", # "destination": { # "group": { # "address_group": "inbound" # } # }, # "number": 103, # "source": { # "address": "192.0.2.0" # }, # "state": { # "established": true, # "invalid": false, # "new": false, # "related": true # } # } # ] # } # ] # } # ] # # # After state: # ------------- # # vyos@vyos:~$ show configuration commands| grep firewall # set firewall group address-group 'inbound' # set firewall ipv6-name UPLINK default-action 'accept' # set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set' # set firewall ipv6-name UPLINK rule 1 action 'accept' # set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible' # set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec' # set firewall ipv6-name UPLINK rule 2 action 'accept' # set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible' # set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec' # set firewall name INBOUND default-action 'accept' # set firewall name INBOUND description 'IPv4 INBOUND rule set' # set firewall name INBOUND rule 101 action 'accept' # set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible' # set firewall name INBOUND rule 101 ipsec 'match-ipsec' # set firewall name INBOUND rule 102 action 'reject' # set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible' # set firewall name INBOUND rule 102 ipsec 'match-ipsec' # set firewall name INBOUND rule 103 action 'accept' # set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible' # set firewall name INBOUND rule 103 destination group address-group 'inbound' # set firewall name INBOUND rule 103 source address '192.0.2.0' # set firewall name INBOUND rule 103 state established 'enable' # set firewall name INBOUND rule 103 state invalid 'disable' # set firewall name INBOUND rule 103 state new 'disable' # set firewall name INBOUND rule 103 state related 'enable' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_firewall_rules: config: - afi: ipv6 rule_sets: - name: UPLINK description: This is ipv6 specific rule-set default_action: accept - afi: ipv4 rule_sets: - name: INBOUND description: IPv4 INBOUND rule set default_action: accept rules: - number: 101 action: accept description: Rule 101 is configured by Ansible ipsec: match-ipsec - number: 102 action: reject description: Rule 102 is configured by Ansible ipsec: match-ipsec - number: 103 action: accept description: Rule 103 is configured by Ansible destination: group: address_group: inbound source: address: 192.0.2.0 state: established: true new: false invalid: false related: true state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # "set firewall ipv6-name UPLINK default-action 'accept'", # "set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'", # "set firewall name INBOUND default-action 'accept'", # "set firewall name INBOUND description 'IPv4 INBOUND rule set'", # "set firewall name INBOUND rule 101 action 'accept'", # "set firewall name INBOUND rule 101", # "set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'", # "set firewall name INBOUND rule 101 ipsec 'match-ipsec'", # "set firewall name INBOUND rule 102 action 'reject'", # "set firewall name INBOUND rule 102", # "set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'", # "set firewall name INBOUND rule 102 ipsec 'match-ipsec'", # "set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'", # "set firewall name INBOUND rule 103 destination group address-group inbound", # "set firewall name INBOUND rule 103", # "set firewall name INBOUND rule 103 source address 192.0.2.0", # "set firewall name INBOUND rule 103 state established enable", # "set firewall name INBOUND rule 103 state related enable", # "set firewall name INBOUND rule 103 state invalid disable", # "set firewall name INBOUND rule 103 state new disable", # "set firewall name INBOUND rule 103 action 'accept'" # ] # Using parsed # # - name: Parse the commands for provided configuration vyos.vyos.vyos_firewall_rules: running_config: "set firewall group address-group 'inbound' set firewall name Downlink default-action 'accept' set firewall name Downlink description 'IPv4 INBOUND rule set' set firewall name Downlink rule 501 action 'accept' set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible' set firewall name Downlink rule 501 ipsec 'match-ipsec' set firewall name Downlink rule 502 action 'reject' set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible' set firewall name Downlink rule 502 ipsec 'match-ipsec'" state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": [ # { # "afi": "ipv4", # "rule_sets": [ # { # "default_action": "accept", # "description": "IPv4 INBOUND rule set", # "name": "Downlink", # "rules": [ # { # "action": "accept", # "description": "Rule 501 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 501 # }, # { # "action": "reject", # "description": "Rule 502 is configured by Ansible", # "ipsec": "match-ipsec", # "number": 502 # } # ] # } # ] # } # ] Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration after module execution.

Sample:
This output will always be in the same format as the module argspec.
before
dictionary
when state is merged, replaced, overridden, deleted or purged
The configuration prior to the module execution.

Sample:
This output will always be in the same format as the module argspec.
commands
list
always
The set of commands pushed to the remote device.

Sample:
["set firewall name Downlink default-action 'accept'", "set firewall name Downlink description 'IPv4 INBOUND rule set'", "set firewall name Downlink rule 501 action 'accept'", "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'", "set firewall name Downlink rule 502 ipsec 'match-ipsec'"]
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
["set firewall name Downlink default-action 'accept'", "set firewall name Downlink description 'IPv4 INBOUND rule set'", "set firewall name Downlink rule 501 action 'accept'", "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'", "set firewall name Downlink rule 502 ipsec 'match-ipsec'"]


Status ------ Authors ~~~~~~~ - Rohit Thakur (@rohitthakur2590) - Gaige B. Paulsen (@gaige)