.. _vyos.vyos.vyos_ospfv2_module: ********************* vyos.vyos.vyos_ospfv2 ********************* **OSPFv2 resource module** Version added: 1.0.0 .. contents:: :local: :depth: 1 Synopsis -------- - This resource module configures and manages attributes of OSPFv2 routes on VyOS network devices. Parameters ---------- .. raw:: html
Parameter Choices/Defaults Comments
config
dictionary
A provided OSPFv2 route configuration.
areas
list / elements=dictionary
OSPFv2 area.
area_id
string
OSPFv2 area identity.
area_type
dictionary
Area type.
normal
boolean
    Choices:
  • no
  • yes
Normal OSPFv2 area.
nssa
dictionary
NSSA OSPFv2 area.
default_cost
integer
Summary-default cost of NSSA area.
no_summary
boolean
    Choices:
  • no
  • yes
Do not inject inter-area routes into stub.
set
boolean
    Choices:
  • no
  • yes
Enabling NSSA.
translate
string
    Choices:
  • always
  • candidate
  • never
NSSA-ABR.
stub
dictionary
Stub OSPFv2 area.
default_cost
integer
Summary-default cost of stub area.
no_summary
boolean
    Choices:
  • no
  • yes
Do not inject inter-area routes into stub.
set
boolean
    Choices:
  • no
  • yes
Enabling stub.
authentication
string
    Choices:
  • plaintext-password
  • md5
OSPFv2 area authentication type.
network
list / elements=dictionary
OSPFv2 network.
address
string / required
OSPFv2 IPv4 network address.
range
list / elements=dictionary
Summarize routes matching prefix (border routers only).
address
string
border router IPv4 address.
cost
integer
Metric for this range.
not_advertise
boolean
    Choices:
  • no
  • yes
Don't advertise this range.
substitute
string
Announce area range (IPv4 address) as another prefix.
shortcut
string
    Choices:
  • default
  • disable
  • enable
Area's shortcut mode.
virtual_link
list / elements=dictionary
Virtual link address.
address
string
virtual link address.
authentication
dictionary
OSPFv2 area authentication type.
md5
list / elements=dictionary
MD5 key id based authentication.
key_id
integer
MD5 key id.
md5_key
string
MD5 key.
plaintext_password
string
Plain text password.
dead_interval
integer
Interval after which a neighbor is declared dead.
hello_interval
integer
Interval between hello packets.
retransmit_interval
integer
Interval between retransmitting lost link state advertisements.
transmit_delay
integer
Link state transmit delay.
auto_cost
dictionary
Calculate OSPFv2 interface cost according to bandwidth.
reference_bandwidth
integer
Reference bandwidth cost in Mbits/sec.
default_information
dictionary
Control distribution of default information.
originate
dictionary
Distribute a default route.
always
boolean
    Choices:
  • no
  • yes
Always advertise default route.
metric
integer
OSPFv2 default metric.
metric_type
integer
OSPFv2 Metric types for default routes.
route_map
string
Route map references.
default_metric
integer
Metric of redistributed routes
distance
dictionary
Administrative distance.
global
integer
Global OSPFv2 administrative distance.
ospf
dictionary
OSPFv2 administrative distance.
external
integer
Distance for external routes.
inter_area
integer
Distance for inter-area routes.
intra_area
integer
Distance for intra-area routes.
log_adjacency_changes
string
    Choices:
  • detail
Log changes in adjacency state.
max_metric
dictionary
OSPFv2 maximum/infinite-distance metric.
router_lsa
dictionary
Advertise own Router-LSA with infinite distance (stub router).
administrative
boolean
    Choices:
  • no
  • yes
Administratively apply, for an indefinite period.
on_shutdown
integer
Time to advertise self as stub-router.
on_startup
integer
Time to advertise self as stub-router
mpls_te
dictionary
MultiProtocol Label Switching-Traffic Engineering (MPLS-TE) parameters.
enabled
boolean
    Choices:
  • no
  • yes
Enable MPLS-TE functionality.
router_address
string
Stable IP address of the advertising router.
neighbor
list / elements=dictionary
Neighbor IP address.
neighbor_id
string
Identity (number/IP address) of neighbor.
poll_interval
integer
Seconds between dead neighbor polling interval.
priority
integer
Neighbor priority.
parameters
dictionary
OSPFv2 specific parameters.
abr_type
string
    Choices:
  • cisco
  • ibm
  • shortcut
  • standard
OSPFv2 ABR Type.
opaque_lsa
boolean
    Choices:
  • no
  • yes
Enable the Opaque-LSA capability (rfc2370).
rfc1583_compatibility
boolean
    Choices:
  • no
  • yes
Enable rfc1583 criteria for handling AS external routes.
router_id
string
Override the default router identifier.
passive_interface
list / elements=string
Suppress routing updates on an interface.
passive_interface_exclude
list / elements=string
Interface to exclude when using passive-interface default.
redistribute
list / elements=dictionary
Redistribute information from another routing protocol.
metric
integer
Metric for redistribution routes.
metric_type
integer
OSPFv2 Metric types.
route_map
string
Route map references.
route_type
string
    Choices:
  • bgp
  • connected
  • kernel
  • rip
  • static
Route type to redistribute.
route_map
list / elements=string
Filter routes installed in local route map.
timers
dictionary
Adjust routing timers.
refresh
dictionary
Adjust refresh parameters.
timers
integer
refresh timer.
throttle
dictionary
Throttling adaptive timers.
spf
dictionary
OSPFv2 SPF timers.
delay
integer
Delay (msec) from first change received till SPF calculation.
initial_holdtime
integer
Initial hold time(msec) between consecutive SPF calculations.
max_holdtime
integer
maximum hold time (sec).
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep ospf.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • deleted
  • parsed
  • gathered
  • rendered
The state the configuration should be left in.

Notes ----- .. note:: - Tested against VyOS 1.1.8 (helium). - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. Examples -------- .. code-block:: yaml # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep ospf # # - name: Merge the provided configuration with the existing running configuration vyos.vyos.vyos_ospfv2: config: log_adjacency_changes: detail max_metric: router_lsa: administrative: true on_shutdown: 10 on_startup: 10 default_information: originate: always: true metric: 10 metric_type: 2 route_map: ingress mpls_te: enabled: true router_address: 192.0.11.11 auto_cost: reference_bandwidth: 2 neighbor: - neighbor_id: 192.0.11.12 poll_interval: 10 priority: 2 redistribute: - route_type: bgp metric: 10 metric_type: 2 passive_interface: - eth1 - eth2 parameters: router_id: 192.0.1.1 opaque_lsa: true rfc1583_compatibility: true abr_type: cisco areas: - area_id: '2' area_type: normal: true authentication: plaintext-password shortcut: enable - area_id: '3' area_type: nssa: set: true - area_id: '4' area_type: stub: default_cost: 20 network: - address: 192.0.2.0/24 range: - address: 192.0.3.0/24 cost: 10 - address: 192.0.4.0/24 cost: 12 state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": {} # # "commands": [ # "set protocols ospf mpls-te enable", # "set protocols ospf mpls-te router-address '192.0.11.11'", # "set protocols ospf redistribute bgp", # "set protocols ospf redistribute bgp metric-type 2", # "set protocols ospf redistribute bgp metric 10", # "set protocols ospf default-information originate metric-type 2", # "set protocols ospf default-information originate always", # "set protocols ospf default-information originate metric 10", # "set protocols ospf default-information originate route-map ingress", # "set protocols ospf auto-cost reference-bandwidth '2'", # "set protocols ospf parameters router-id '192.0.1.1'", # "set protocols ospf parameters opaque-lsa", # "set protocols ospf parameters abr-type 'cisco'", # "set protocols ospf parameters rfc1583-compatibility", # "set protocols ospf passive-interface eth1", # "set protocols ospf passive-interface eth2", # "set protocols ospf max-metric router-lsa on-shutdown 10", # "set protocols ospf max-metric router-lsa administrative", # "set protocols ospf max-metric router-lsa on-startup 10", # "set protocols ospf log-adjacency-changes 'detail'", # "set protocols ospf neighbor 192.0.11.12 priority 2", # "set protocols ospf neighbor 192.0.11.12 poll-interval 10", # "set protocols ospf neighbor 192.0.11.12", # "set protocols ospf area '2'", # "set protocols ospf area 2 authentication plaintext-password", # "set protocols ospf area 2 shortcut enable", # "set protocols ospf area 2 area-type normal", # "set protocols ospf area '3'", # "set protocols ospf area 3 area-type nssa", # "set protocols ospf area 4 range 192.0.3.0/24 cost 10", # "set protocols ospf area 4 range 192.0.3.0/24", # "set protocols ospf area 4 range 192.0.4.0/24 cost 12", # "set protocols ospf area 4 range 192.0.4.0/24", # "set protocols ospf area 4 area-type stub default-cost 20", # "set protocols ospf area '4'", # "set protocols ospf area 4 network 192.0.2.0/24" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' # set protocols ospf passive-interface 'eth1' # set protocols ospf passive-interface 'eth2' # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # Using merged # # Before state: # ------------- # # vyos@vyos# run show configuration commands | grep ospf # # - name: Merge the provided configuration to update existing running configuration vyos.vyos.vyos_ospfv2: config: areas: - area_id: '2' area_type: normal: true authentication: plaintext-password shortcut: enable - area_id: '3' area_type: nssa: set: false - area_id: '4' area_type: stub: default_cost: 20 network: - address: 192.0.2.0/24 - address: 192.0.22.0/24 - address: 192.0.32.0/24 state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # "before": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # "commands": [ # "delete protocols ospf area 4 area-type stub", # "set protocols ospf area 4 network 192.0.22.0/24" # "set protocols ospf area 4 network 192.0.32.0/24" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # }, # "network": [ # { # "address": "192.0.2.0/24" # }, # { # "address": "192.0.22.0/24" # }, # { # "address": "192.0.32.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 network '192.0.22.0/24' # set protocols ospf area 4 network '192.0.32.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' # set protocols ospf passive-interface 'eth1' # set protocols ospf passive-interface 'eth2' # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # Using replaced # # Before state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' # set protocols ospf passive-interface 'eth1' # set protocols ospf passive-interface 'eth2' # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # - name: Replace ospfv2 routes attributes configuration. vyos.vyos.vyos_ospfv2: config: log_adjacency_changes: detail max_metric: router_lsa: administrative: true on_shutdown: 10 on_startup: 10 default_information: originate: always: true metric: 10 metric_type: 2 route_map: ingress mpls_te: enabled: true router_address: 192.0.22.22 auto_cost: reference_bandwidth: 2 neighbor: - neighbor_id: 192.0.11.12 poll_interval: 10 priority: 2 redistribute: - route_type: bgp metric: 10 metric_type: 2 passive_interface: - eth1 parameters: router_id: 192.0.1.1 opaque_lsa: true rfc1583_compatibility: true abr_type: cisco areas: - area_id: '2' area_type: normal: true authentication: plaintext-password shortcut: enable - area_id: '4' area_type: stub: default_cost: 20 network: - address: 192.0.2.0/24 - address: 192.0.12.0/24 - address: 192.0.22.0/24 - address: 192.0.32.0/24 range: - address: 192.0.42.0/24 cost: 10 state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # "commands": [ # "delete protocols ospf passive-interface eth2", # "delete protocols ospf area 3", # "delete protocols ospf area 4 range 192.0.3.0/24 cost", # "delete protocols ospf area 4 range 192.0.3.0/24", # "delete protocols ospf area 4 range 192.0.4.0/24 cost", # "delete protocols ospf area 4 range 192.0.4.0/24", # "set protocols ospf mpls-te router-address '192.0.22.22'", # "set protocols ospf area 4 range 192.0.42.0/24 cost 10", # "set protocols ospf area 4 range 192.0.42.0/24", # "set protocols ospf area 4 network 192.0.12.0/24", # "set protocols ospf area 4 network 192.0.22.0/24", # "set protocols ospf area 4 network 192.0.32.0/24" # ] # # "after": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.12.0/24" # }, # { # "address": "192.0.2.0/24" # }, # { # "address": "192.0.22.0/24" # }, # { # "address": "192.0.32.0/24" # } # ], # "range": [ # { # "address": "192.0.42.0/24", # "cost": 10 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.22.22" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 network '192.0.12.0/24' # set protocols ospf area 4 network '192.0.22.0/24' # set protocols ospf area 4 network '192.0.32.0/24' # set protocols ospf area 4 range 192.0.42.0/24 cost '10' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.22.22' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' # set protocols ospf passive-interface 'eth1' # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # Using rendered # # - name: Render the commands for provided configuration vyos.vyos.vyos_ospfv2: config: log_adjacency_changes: detail max_metric: router_lsa: administrative: true on_shutdown: 10 on_startup: 10 default_information: originate: always: true metric: 10 metric_type: 2 route_map: ingress mpls_te: enabled: true router_address: 192.0.11.11 auto_cost: reference_bandwidth: 2 neighbor: - neighbor_id: 192.0.11.12 poll_interval: 10 priority: 2 redistribute: - route_type: bgp metric: 10 metric_type: 2 passive_interface: - eth1 - eth2 parameters: router_id: 192.0.1.1 opaque_lsa: true rfc1583_compatibility: true abr_type: cisco areas: - area_id: '2' area_type: normal: true authentication: plaintext-password shortcut: enable - area_id: '3' area_type: nssa: set: true - area_id: '4' area_type: stub: default_cost: 20 network: - address: 192.0.2.0/24 range: - address: 192.0.3.0/24 cost: 10 - address: 192.0.4.0/24 cost: 12 state: rendered # # # ------------------------- # Module Execution Result # ------------------------- # # # "rendered": [ # [ # "set protocols ospf mpls-te enable", # "set protocols ospf mpls-te router-address '192.0.11.11'", # "set protocols ospf redistribute bgp", # "set protocols ospf redistribute bgp metric-type 2", # "set protocols ospf redistribute bgp metric 10", # "set protocols ospf default-information originate metric-type 2", # "set protocols ospf default-information originate always", # "set protocols ospf default-information originate metric 10", # "set protocols ospf default-information originate route-map ingress", # "set protocols ospf auto-cost reference-bandwidth '2'", # "set protocols ospf parameters router-id '192.0.1.1'", # "set protocols ospf parameters opaque-lsa", # "set protocols ospf parameters abr-type 'cisco'", # "set protocols ospf parameters rfc1583-compatibility", # "set protocols ospf passive-interface eth1", # "set protocols ospf passive-interface eth2", # "set protocols ospf max-metric router-lsa on-shutdown 10", # "set protocols ospf max-metric router-lsa administrative", # "set protocols ospf max-metric router-lsa on-startup 10", # "set protocols ospf log-adjacency-changes 'detail'", # "set protocols ospf neighbor 192.0.11.12 priority 2", # "set protocols ospf neighbor 192.0.11.12 poll-interval 10", # "set protocols ospf neighbor 192.0.11.12", # "set protocols ospf area '2'", # "set protocols ospf area 2 authentication plaintext-password", # "set protocols ospf area 2 shortcut enable", # "set protocols ospf area 2 area-type normal", # "set protocols ospf area '3'", # "set protocols ospf area 3 area-type nssa", # "set protocols ospf area 4 range 192.0.3.0/24 cost 10", # "set protocols ospf area 4 range 192.0.3.0/24", # "set protocols ospf area 4 range 192.0.4.0/24 cost 12", # "set protocols ospf area 4 range 192.0.4.0/24", # "set protocols ospf area 4 area-type stub default-cost 20", # "set protocols ospf area '4'", # "set protocols ospf area 4 network 192.0.2.0/24" # ] # Using parsed # # - name: Parse the commands for provided structured configuration vyos.vyos.vyos_ospfv2: running_config: "set protocols ospf area 2 area-type 'normal' set protocols ospf area 2 authentication 'plaintext-password' set protocols ospf area 2 shortcut 'enable' set protocols ospf area 3 area-type 'nssa' set protocols ospf area 4 area-type stub default-cost '20' set protocols ospf area 4 network '192.0.2.0/24' set protocols ospf area 4 range 192.0.3.0/24 cost '10' set protocols ospf area 4 range 192.0.4.0/24 cost '12' set protocols ospf auto-cost reference-bandwidth '2' set protocols ospf default-information originate 'always' set protocols ospf default-information originate metric '10' set protocols ospf default-information originate metric-type '2' set protocols ospf default-information originate route-map 'ingress' set protocols ospf log-adjacency-changes 'detail' set protocols ospf max-metric router-lsa 'administrative' set protocols ospf max-metric router-lsa on-shutdown '10' set protocols ospf max-metric router-lsa on-startup '10' set protocols ospf mpls-te 'enable' set protocols ospf mpls-te router-address '192.0.11.11' set protocols ospf neighbor 192.0.11.12 poll-interval '10' set protocols ospf neighbor 192.0.11.12 priority '2' set protocols ospf parameters abr-type 'cisco' set protocols ospf parameters 'opaque-lsa' set protocols ospf parameters 'rfc1583-compatibility' set protocols ospf parameters router-id '192.0.1.1' set protocols ospf passive-interface 'eth1' set protocols ospf passive-interface 'eth2' set protocols ospf redistribute bgp metric '10' set protocols ospf redistribute bgp metric-type '2'" state: parsed # # # ------------------------- # Module Execution Result # ------------------------- # # # "parsed": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # } # Using gathered # # Before state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' # set protocols ospf passive-interface 'eth1' # set protocols ospf passive-interface 'eth2' # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # - name: Gather ospfv2 routes config with provided configurations vyos.vyos.vyos_ospfv2: config: state: gathered # # # ------------------------- # Module Execution Result # ------------------------- # # "gathered": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # # After state: # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' # set protocols ospf passive-interface 'eth1' # set protocols ospf passive-interface 'eth2' # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # Using deleted # # Before state # ------------- # # vyos@192# run show configuration commands | grep ospf # set protocols ospf area 2 area-type 'normal' # set protocols ospf area 2 authentication 'plaintext-password' # set protocols ospf area 2 shortcut 'enable' # set protocols ospf area 3 area-type 'nssa' # set protocols ospf area 4 area-type stub default-cost '20' # set protocols ospf area 4 network '192.0.2.0/24' # set protocols ospf area 4 range 192.0.3.0/24 cost '10' # set protocols ospf area 4 range 192.0.4.0/24 cost '12' # set protocols ospf auto-cost reference-bandwidth '2' # set protocols ospf default-information originate 'always' # set protocols ospf default-information originate metric '10' # set protocols ospf default-information originate metric-type '2' # set protocols ospf default-information originate route-map 'ingress' # set protocols ospf log-adjacency-changes 'detail' # set protocols ospf max-metric router-lsa 'administrative' # set protocols ospf max-metric router-lsa on-shutdown '10' # set protocols ospf max-metric router-lsa on-startup '10' # set protocols ospf mpls-te 'enable' # set protocols ospf mpls-te router-address '192.0.11.11' # set protocols ospf neighbor 192.0.11.12 poll-interval '10' # set protocols ospf neighbor 192.0.11.12 priority '2' # set protocols ospf parameters abr-type 'cisco' # set protocols ospf parameters 'opaque-lsa' # set protocols ospf parameters 'rfc1583-compatibility' # set protocols ospf parameters router-id '192.0.1.1' # set protocols ospf passive-interface 'eth1' # set protocols ospf passive-interface 'eth2' # set protocols ospf redistribute bgp metric '10' # set protocols ospf redistribute bgp metric-type '2' # - name: Delete attributes of ospfv2 routes. vyos.vyos.vyos_ospfv2: config: state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": { # "areas": [ # { # "area_id": "2", # "area_type": { # "normal": true # }, # "authentication": "plaintext-password", # "shortcut": "enable" # }, # { # "area_id": "3", # "area_type": { # "nssa": { # "set": true # } # } # }, # { # "area_id": "4", # "area_type": { # "stub": { # "default_cost": 20, # "set": true # } # }, # "network": [ # { # "address": "192.0.2.0/24" # } # ], # "range": [ # { # "address": "192.0.3.0/24", # "cost": 10 # }, # { # "address": "192.0.4.0/24", # "cost": 12 # } # ] # } # ], # "auto_cost": { # "reference_bandwidth": 2 # }, # "default_information": { # "originate": { # "always": true, # "metric": 10, # "metric_type": 2, # "route_map": "ingress" # } # }, # "log_adjacency_changes": "detail", # "max_metric": { # "router_lsa": { # "administrative": true, # "on_shutdown": 10, # "on_startup": 10 # } # }, # "mpls_te": { # "enabled": true, # "router_address": "192.0.11.11" # }, # "neighbor": [ # { # "neighbor_id": "192.0.11.12", # "poll_interval": 10, # "priority": 2 # } # ], # "parameters": { # "abr_type": "cisco", # "opaque_lsa": true, # "rfc1583_compatibility": true, # "router_id": "192.0.1.1" # }, # "passive_interface": [ # "eth2", # "eth1" # ], # "redistribute": [ # { # "metric": 10, # "metric_type": 2, # "route_type": "bgp" # } # ] # } # "commands": [ # "delete protocols ospf" # ] # # "after": {} # After state # ------------ # vyos@192# run show configuration commands | grep ospf # Return Values ------------- Common return values are documented `here `_, the following are the fields unique to this module: .. raw:: html
Key Returned Description
after
dictionary
when changed
The resulting configuration model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
dictionary
always
The configuration prior to the model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
['set protocols ospf parameters router-id 192.0.1.1', "set protocols ospf passive-interface 'eth1'"]


Status ------ Authors ~~~~~~~ - Rohit Thakur (@rohitthakur2590)