diff options
Diffstat (limited to 'accel-pptpd/accel-pptp.conf.5')
| -rw-r--r-- | accel-pptpd/accel-pptp.conf.5 | 384 |
1 files changed, 0 insertions, 384 deletions
diff --git a/accel-pptpd/accel-pptp.conf.5 b/accel-pptpd/accel-pptp.conf.5 deleted file mode 100644 index b786bef2..00000000 --- a/accel-pptpd/accel-pptp.conf.5 +++ /dev/null @@ -1,384 +0,0 @@ -.TH ACCEL-PPTP.CONF 5 "6 October 2010" -.SH NAME -.B accel-pptp.conf -- ACCEL-PPTP VPN daemon configuration -.SH DESCRIPTION -.BR accel-pptpd (8) -reads options from this file, usually -.IR /etc/accel-pptp.conf -.TP -Configuration file consists of sections in form: -.TP -[section1] -.br -name1=val1 -.br -name2=val2 -.br -name3 -.TP -[section2] -.br - .... -.br -.SH SECTIONS -.TP -.SH [modules] -containes list of modules to load -.TP -.BI log_file -This is logging target which logs messages to files. It support per-session/per-user features. -.TP -.BI log_tcp -This is logging target which logs messages over TCP/IP. -.TP -.BI log_pgsql -This is logging target which logs messages to PostgreSQL. -.TP -.BI pptp -.br -PPTP controlling connection handling module. -.TP -.BI pppoe -.br -PPPoE discovery stage handling module. -.TP -.BI auth_pap -PAP authentication module. -.TP -.BI auth_chap -CHAP (md5) authentication module. -.TP -.BI auth_mschap_v1 -Microsoft CHAP (version 1) authentication module. -.TP -.BI auth_mschap_v2 -Microsoft CHAP (version 2) authentication module. -.TP -.BI radius -.br -RADIUS interaction module. -.TP -.BI ippool -.br -IP address assigning module. -.TP -.BI sigchld -Helper module to manage child processes, required by pppd_compat -.TP -.BI pppd_compat -This module starts pppd compatible ip-up/ip-down scripts and ip-change to handle RADIUS CoA request. -.TP -.SH [core] -Configuration of core module -.TP -.BI "log-error=" path -Path to file for core module error logging. -.TP -.BI "thread-count=" n -number of working threads, optimal - number of processors/cores -.TP -.SH [ppp] -.br -PPP module configuration. -.TP -.BI "verbose=" n -If n is not zero ppp module will produce verbose logging. -.TP -.BI "min-mtu=" n -Minimum acceptable MTU. If client will try to negotiate less then specified MTU then it will be NAKed or disconnected if rejects greater MTU. -.TP -.BI "mtu=" n -MTU which will be negotiated if client's MRU will be not acceptable. -.TP -.BI "mru=" n -Prefered MRU. -.TP -.BI "ccp=" n -Disable CCP negotiation if this parameter is zero. -.TP -.TP -.BI "sid-case=" upper|lower -Specifies in which case generate session identifier (default lower). -.TP -.BI "check-ip=" 0|1 -Specifies whether accel-pptp should check if IP already assigned to other ppp interface (default 0). -.TP -.SH [lcp] -.br -PPP LCP module configuration -.TP -.BI "echo-interval=" n -If this option is given and greater then 0 then lcp module will send echo-request every -.B n -seconds. -.TP -.BI "echo-failure=" n -Specifies maximum number of echo-requests may be sent without valid echo-reply, if exceeds connection will be terminated. -.TP -.SH [dns] -.TP -.BI "dns1=" x.x.x.x -Specifies primary DNS to be sent to peer. -.TP -.BI "dns2=" x.x.x.x -Specifies secondary DNS to be sent to peer. -.TP -.SH [client-ip-range] -You have to explicitly specify range of ip address from which clients can connect to server in form: -.br -.B x.x.x.x/mask -(for example 10.0.0.0/8) -.br -.B x.x.x.x-y -(for example 10.0.0.1-254) -.TP -.SH [pptp] -.br -Configuration of PPTP module. -.TP -.BI "bind=" x.x.x.x -If this option is given then pptp server will bind to specified IP address. -.TP -.BI "verbose=" n -If this option is given and -.B n -is greater of zero then pptp module will produce verbose logging. -.TP -.BI "echo-interval=" n -If this option is given and greater then zero then pptp module will send echo-request every -.B n -seconds. -.TP -.BI "echo-failure=" n -Specifies maximum number of echo-requests may be sent without valid echo-reply, if exceeds connection will be terminated. -.TP -.BI "timeout=" n -Timeout waiting reply from client in seconds (default 5). -.TP -.SH [pppoe] -.br -Configuration of PPPoE module. -.TP -.BI "interface=" ethX -Specifies interface name to listen/send discovery packets. You may specify multiple -.B interface -options. -.TP -.BI "ac-name=" ac-name -Specifies AC-Name tag value. If absent tag will not be sent. -.TP -.BI "service-name=" service-name -Specifies Service-Name to respond. If absent any Service-Name is acceptable and client's Service-Name will be sent back. -.TP -.BI "pado-delay=" delay[,delay1:count1[,delay2:count2[,...]]] -Specifies delays (also in condition of connection count) to send PADO (ms). -Last delay in list may be -1 which means don't accept new connections. -List have to be sorted by count key. -.TP -.BI "mac-filter=" filename,type -Specifies mac-filter filename and type, type maybe -.B allow -or -.B deny -.TP -.BI "ifname-in-sid=" called-sid|calling-sid|both -Specifies that interface name should be present in Called-Station-ID or in Calling-Station-ID or in both attributes. -.TP -.BI "verbose=" n -If this option is given and -.B n -is greater of zero then pppoe module will produce verbose logging. -.TP -.SH [l2tp] -.br -Configuration of L2TP module. -.TP -.BI "bind=" x.x.x.x -Specifies IP address to bind. -.TP -.BI "host-name=" string -This name will be sent to clients in Host-Name attribute. -.TP -.BI "hello-interval=" n -Specifies interval (in seconds) to send Hello control message. Its used for keep alive connection. If peer will not respond to Hello connection will be terminated. -.TP -.BI "timeout=" n -Specifies timeout (in seconds) to wait peer completes tunnel and session negotiation. -.TP -.BI "rtimeout=" n -Specifies timeout (in seconds) to wait message acknowledge, if elapsed message retransmition will be performed. -.TP -.BI "retransmit=" n -Specifies maximum number of message retransmission, if exceeds connection will be terminated. -.TP -.BI "verbose=" n -If this option is given and -.B n -is greater of zero then l2tp module will produce verbose logging. -.TP -.SH [radius] -.br -Configuration of RADIUS module. -.TP -.BI "nas-identifier=" identifier -Specifies value to send to RADIUS server in NAS-Identifier attribute and to be matched in DM/CoA requests. -.TP -.BI "nas-ip-address=" x.x.x.x -Specifies value to send to RADIUS server in NAS-IP-Address attribute and to be matched in DM/CoA requests. -Also DM/CoA server will bind to that address. -.TP -.BI "gw-ip-address=" x.x.x.x -Specifies address to use as local address of ppp interfaces if Framed-IP-Address received from RADIUS server. -.TP -.BI "auth-server=" x.x.x.x:port,secret -Specifies IP address, port and secret of authentication RADIUS server. -.TP -.BI "acct-server=" x.x.x.x:port,secret -Specifies IP address, port and secret of accounting RADIUS server. -.TP -.BI "dae-server=" x.x.x.x:port,secret -Specifies IP address, port to bind and secret for Dynamic Authorization Extension server (DM/CoA). -.TP -.BI "dm_coa_secret=" secret (deprecated, use dae-server instead) -Specifies secret to use in DM/CoA communication. -.TP -.BI "acct-interim-interval=" n -Specifies interval in seconds to send accounting information (may be overriden by radius Acct-Interim-Interval attribute) -.TP -.BI "verbose=" n -If this option is given and -.B n -is greater of zero then radius module will produce verbose logging. -.TP -.BI "interim-verbose=" n -If this option is given and -.B n -is greater of zero then radius module will produce verbose logging of interim radius packets. -.TP -.BI "timeout=" n -Timeout to wait response from server (sec) -.TP -.BI "max-try=" n -Specifies number of tries to send Access-Request/Accounting-Request queries. -.TP -.BI "acct-timeout=" n -Specifies timeout of accounting interim update. -.TP -.SH [log] -.br -Configuration of log and log_file modules. -.TP -.BI "log-file=" file -Path to file to write general log. -.TP -.BI "log-emerg=" file -Path to file to write emergency messages. -.TP -.BI "log-tcp=" x.x.x.x:port -Send logs to specified host. -.TP -.BI "copy=" n -If this options is given and greater then zero logging engine will duplicate session log in general log. -(Useful when per-session/per-user logs are not used) -.TP -.BI "per-session-dir=" dir -Directory for session logs. If specified each session will be logged separately to file which name is unique session identifier. -.TP -.BI "per-user-dir=" dir -Directory for user logs. If specified all sessions of same user will be logged to file which name is user name. -.TP -.BI "per-session=" n -If specified and n is greater then zero each session of same user will be logger separately to directory specified by "per-user-dir" -and subdirectory which name is user name and to file which name os unique session identifier. -.TP -.BI "level=" n -Specifies log level which values are: -.br -.B 0 -turn off all logging -.br -.B 1 -log only error messages -.br -.B 2 -log error and warning messages -.br -.B 3 -log error, warning and minimum information messages (use this level in conjuction with verbose option of other modules if you need verbose logging) -.br -.B 4 -log error, warning and full information messages (use this level in conjuction with verbose option of other modules if you need verbose logging) -.br -.B 5 -log all messages including debug messages -.TP -.SH [log-pgsql] -.br -Configuration of log_pgsql module. -.TP -.BI "conninfo=" conninfo -Conninfo to connect to PostgreSQL server. -.TP -.BI "log-table=" table -Table to send log messages. Table must contain following field: -.br -.B timestamp -timestamp -.br -.B username -text -.br -.B sessionid -text -.br -.B msg -text -.TP -.SH [pppd_compat] -.br -Configuration of pppd_compat module. -.TP -.BI "ip-pre-up=" file -Path to ip-pre-up script which is executed before ppp interface comes up, useful to setup firewall rules before any traffic can pass through the interface. -.TP -.BI "ip-up=" file -Path to ip-up script which is executed when ppp interfaces is completly configured and started. -.TP -.BI "ip-down=" file -Path to ip-down script which is executed when session is about to terminate. -.TP -.BI "ip-change=" file -Path to ip-change script which is executed for RADIUS CoA handling. -.TP -.BI "radattr=" prefix -Prefix of radattr files (for example /var/run/radattr, resulting files will be /var/run/radattr.pppX) -.TP -.BI "verbose=" n -If specified and greated then zero pppd_module will produce verbose logging. -.TP -.SH [ip-pool] -.br -Configuration of ippool module. -.TP -.BI "gw-ip-address=" x.x.x.x -Specifies single IP address to be used as local address of ppp interfaces. -.TP -.BI "gw=" range -Specifies range of local address of ppp interfaces if form: -.br -.B x.x.x.x/mask -(for example 10.0.0.0/8) -.br -.B x.x.x.x-y -(for example 10.0.0.1-254) -.TP -.BI "tunnel=" range -Specifies range of remote address of ppp interfaces if form: -.br -.B x.x.x.x/mask -.br -.B x.x.x.x-y -.TP -.BI "x.x.x.x/mask or x.x.x.x-y" -Also specifies range of remote address of ppp interfaces. |