initial import

6 files changed, 280 insertions, 0 deletions

diff --git a/example/etc/modprobe.conf b/example/etc/modprobe.conf
new file mode 100644
index 0000000..df0b014
--- /dev/null
+++ b/example/etc/modprobe.conf
@@ -0,0 +1 @@
+alias net-pf-24 pptp
diff --git a/example/etc/ppp/chap-secrets b/example/etc/ppp/chap-secrets
new file mode 100644
index 0000000..63fe628
--- /dev/null
+++ b/example/etc/ppp/chap-secrets
@@ -0,0 +1,4 @@
+# Secrets for authentication using CHAP
+# client	server	secret			IP addresses
+test pptp test *
+test2 pptp test2 *
diff --git a/example/etc/ppp/options.pptp b/example/etc/ppp/options.pptp
new file mode 100644
index 0000000..f153273
--- /dev/null
+++ b/example/etc/ppp/options.pptp
@@ -0,0 +1,51 @@
+###############################################################################
+# $Id: options.pptp,v 1.2 2005/08/20 13:16:38 quozl Exp $
+#
+# Sample PPTP PPP options file /etc/ppp/options.pptp
+# Options used by PPP when a connection is made by a PPTP client.
+# This file can be referred to by an /etc/ppp/peers file for the tunnel.
+# Changes are effective on the next connection.  See "man pppd".
+#
+# You are expected to change this file to suit your system.  As
+# packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/
+# and the kernel MPPE module available from the CVS repository also on
+# http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe.
+###############################################################################
+
+# Lock the port
+#lock
+
+# Authentication
+# We don't need the tunnel server to authenticate itself
+noauth
+
+# We won't do EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2
+refuse-eap
+refuse-chap
+refuse-mschap
+
+# Compression
+# Turn off compression protocols we know won't be used
+nobsdcomp
+nodeflate
+novj
+novjccomp
+
+# Encryption
+# (There have been multiple versions of PPP with encryption support,
+# choose with of the following sections you will use.  Note that MPPE
+# requires the use of MSCHAP-V2 during authentication)
+
+# http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras
+# ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o
+# {{{
+# Require MPPE 128-bit encryption
+require-mppe-128
+# }}}
+
+# http://polbox.com/h/hs001/ fork from PPP project by Jan Dubiec
+# ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o
+# {{{
+# Require MPPE 128-bit encryption
+#mppe required,stateless
+# }}}
diff --git a/example/etc/ppp/options.pptpd b/example/etc/ppp/options.pptpd
new file mode 100644
index 0000000..67beac0
--- /dev/null
+++ b/example/etc/ppp/options.pptpd
@@ -0,0 +1,129 @@
+###############################################################################
+# $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $
+#
+# Sample Poptop PPP options file /etc/ppp/options.pptpd
+# Options used by PPP when a connection arrives from a client.
+# This file is pointed to by /etc/pptpd.conf option keyword.
+# Changes are effective on the next connection.  See "man pppd".
+#
+# You are expected to change this file to suit your system.  As
+# packaged, it requires PPP 2.4.2 and the kernel MPPE module.
+###############################################################################
+
+
+# Authentication
+
+# Name of the local system for authentication purposes 
+# (must match the second field in /etc/ppp/chap-secrets entries)
+name pptpd
+
+# Strip the domain prefix from the username before authentication.
+# (applies if you use pppd with chapms-strip-domain patch)
+#chapms-strip-domain
+
+
+# Encryption
+# (There have been multiple versions of PPP with encryption support,
+# choose with of the following sections you will use.)
+
+
+# BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o
+# {{{
+refuse-pap
+refuse-chap
+refuse-mschap
+# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
+# Challenge Handshake Authentication Protocol, Version 2] authentication.
+require-mschap-v2
+# Require MPPE 128-bit encryption
+# (note that MPPE requires the use of MSCHAP-V2 during authentication)
+require-mppe-128
+# }}}
+
+
+# OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o
+# {{{
+#-chap
+#-chapms
+# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
+# Challenge Handshake Authentication Protocol, Version 2] authentication.
+#+chapms-v2
+# Require MPPE encryption
+# (note that MPPE requires the use of MSCHAP-V2 during authentication)
+#mppe-40	# enable either 40-bit or 128-bit, not both
+#mppe-128
+#mppe-stateless
+# }}}
+
+
+# Network and Routing
+
+# If pppd is acting as a server for Microsoft Windows clients, this
+# option allows pppd to supply one or two DNS (Domain Name Server)
+# addresses to the clients.  The first instance of this option
+# specifies the primary DNS address; the second instance (if given)
+# specifies the secondary DNS address.
+#ms-dns 10.0.0.1
+#ms-dns 10.0.0.2
+
+# If pppd is acting as a server for Microsoft Windows or "Samba"
+# clients, this option allows pppd to supply one or two WINS (Windows
+# Internet Name Services) server addresses to the clients.  The first
+# instance of this option specifies the primary WINS address; the
+# second instance (if given) specifies the secondary WINS address.
+#ms-wins 10.0.0.3
+#ms-wins 10.0.0.4
+
+# Add an entry to this system's ARP [Address Resolution Protocol]
+# table with the IP address of the peer and the Ethernet address of this
+# system.  This will have the effect of making the peer appear to other
+# systems to be on the local ethernet.
+# (you do not need this if your PPTP server is responsible for routing
+# packets to the clients -- James Cameron)
+proxyarp
+
+# Normally pptpd passes the IP address to pppd, but if pptpd has been
+# given the delegate option in pptpd.conf or the --delegate command line
+# option, then pppd will use chap-secrets or radius to allocate the
+# client IP address.  The default local IP address used at the server
+# end is often the same as the address of the server.  To override this,
+# specify the local IP address here.
+# (you must not use this unless you have used the delegate option)
+#10.8.0.100
+
+
+# Logging
+
+# Enable connection debugging facilities.
+# (see your syslog configuration for where pppd sends to)
+#debug
+
+# Print out all the option values which have been set.
+# (often requested by mailing list to verify options)
+#dump
+
+
+# Miscellaneous
+
+# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive
+# access.
+#lock
+
+# Disable BSD-Compress compression
+nobsdcomp 
+nodeflate
+
+# Disable Van Jacobson compression 
+# (needed on some networks with Windows 9x/ME/XP clients, see posting to
+# poptop-server on 14th April 2005 by Pawel Pokrywka and followups,
+# http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 )
+novj
+novjccomp
+
+# turn off logging to stderr, since this may be redirected to pptpd, 
+# which may trigger a loopback
+nologfd
+
+# put plugins here 
+# (putting them higher up may cause them to sent messages to the pty)
+
diff --git a/example/etc/ppp/peers/pptp_test b/example/etc/ppp/peers/pptp_test
new file mode 100644
index 0000000..113dfa9
--- /dev/null
+++ b/example/etc/ppp/peers/pptp_test
@@ -0,0 +1,13 @@
+plugin "pptp.so"
+pptp_server 192.168.10.10
+#pptp_phone 12345
+name test
+remotename pptp
+file /etc/ppp/options.pptp
+ipparam test
+#debug
+#dump
+mtu 1436
+mru 1436
+lcp-echo-interval 20
+lcp-echo-failure  3
diff --git a/example/etc/pptpd.conf b/example/etc/pptpd.conf
new file mode 100644
index 0000000..8c1a445
--- /dev/null
+++ b/example/etc/pptpd.conf
@@ -0,0 +1,82 @@
+###############################################################################
+# $Id: pptpd.conf,v 1.8 2004/04/28 11:36:07 quozl Exp $
+#
+# Sample Poptop configuration file /etc/pptpd.conf
+#
+# Changes are effective when pptpd is restarted.
+###############################################################################
+
+# TAG: ppp
+#	Path to the pppd program, default '/usr/sbin/pppd' on Linux
+#
+#ppp /usr/sbin/pppd
+
+# TAG: option
+#	Specifies the location of the PPP options file.
+#	By default PPP looks in '/etc/ppp/options'
+#
+option /etc/ppp/options.pptpd
+
+# TAG: debug
+#	Turns on (more) debugging to syslog
+#
+#debug
+
+# TAG: stimeout
+#	Specifies timeout (in seconds) on starting ctrl connection
+#
+# stimeout 10
+
+# TAG: noipparam
+#       Suppress the passing of the client's IP address to PPP, which is
+#       done by default otherwise.
+#
+#noipparam
+
+# TAG: logwtmp
+#	Use wtmp(5) to record client connections and disconnections.
+#
+logwtmp
+
+# TAG: bcrelay <if>
+#	Turns on broadcast relay to clients from interface <if>
+#
+#bcrelay eth1
+
+# TAG: localip
+# TAG: remoteip
+#	Specifies the local and remote IP address ranges.
+#
+#       Any addresses work as long as the local machine takes care of the
+#       routing.  But if you want to use MS-Windows networking, you should
+#       use IP addresses out of the LAN address space and use the proxyarp
+#       option in the pppd options file, or run bcrelay.
+#
+#	You can specify single IP addresses seperated by commas or you can
+#	specify ranges, or both. For example:
+#
+#		192.168.0.234,192.168.0.245-249,192.168.0.254
+#
+#	IMPORTANT RESTRICTIONS:
+#
+#	1. No spaces are permitted between commas or within addresses.
+#
+#	2. If you give more IP addresses than MAX_CONNECTIONS, it will
+#	   start at the beginning of the list and go until it gets 
+#	   MAX_CONNECTIONS IPs. Others will be ignored.
+#
+#	3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
+#	   you must type 234-238 if you mean this.
+#
+#	4. If you give a single localIP, that's ok - all local IPs will
+#	   be set to the given one. You MUST still give at least one remote
+#	   IP for each simultaneous client.
+#
+# (Recommended)
+localip 192.168.0.1-4
+remoteip 192.168.0.234-238
+# or
+#localip 192.168.0.234-238,192.168.0.245
+#remoteip 192.168.1.234-238,192.168.1.245
+
+#speed 4800