| Age | Commit message (Collapse) | Author |
|---|
|
This change enables ipv6 connections between accel-ppp and radius server
|
|
|
|
This patch introduces nas-port-id-in-req switch to disable sending
NAS-Port-Id attribute in radauth and radacct messages. New switch
might be useful if radius server cannot properly handle this
attrubite.
Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
|
|
|
|
New configuration format:
[radius]
server=address,secret[,auth-port=1812][,acct-port=1813][,vrf=VRF_NAME][,req-limit=0][,fail-timeout=0,max-fail=0,][,weight=1][,backup]
dae-server=x.x.x.x:port,secret[,vrf=VRF_NAME]
By default, VRF name is undefined.
|
|
|
|
* Fix errors found by valgrind
==12312== Syscall param sendmsg(msg.msg_iov[0]) points to uninitialised byte(s)
==12312== at 0x486CCF0: sendmsg (in /lib/libpthread-2.22.so)
==12312== by 0x12F57F: rtnl_talk (libnetlink.c:316)
==12312== by 0x132DA3: genl_resolve_mcg (genl.c:52)
==12312== by 0x484E1CB: init (vlan_mon.c:528)
==12312== by 0x484CDC0: vlan_mon_register_proto (vlan_mon.c:48)
==12312== by 0x510B763: load_vlan_mon (pppoe.c:1914)
==12312== by 0x510BFF2: load_config (pppoe.c:2064)
==12312== by 0x510C22A: pppoe_init (pppoe.c:2108)
==12312== by 0x483E9EB: triton_load_modules (triton.c:704)
==12312== by 0x1384B2: main (main.c:339)
==12312== Address 0xbedacdd8 is on thread 1's stack
==12312== in frame #2, created by genl_resolve_mcg (genl.c:23)
==12312== 15 bytes in 1 blocks are definitely lost in loss record 352 of 836
==12312== at 0x482A9A9: malloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
==12312== by 0x4B97524: strdup (in /lib/libc-2.22.so)
==12312== by 0x12C30C: init (telnet.c:769)
==12312== by 0x483E9EB: triton_load_modules (triton.c:704)
==12312== by 0x1384B2: main (main.c:339)
==12312==
==12312== 15 bytes in 1 blocks are definitely lost in loss record 353 of 836
==12312== at 0x482A9A9: malloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
==12312== by 0x4B97524: strdup (in /lib/libc-2.22.so)
==12312== by 0x12D60A: init (tcp.c:392)
==12312== by 0x483E9EB: triton_load_modules (triton.c:704)
==12312== by 0x1384B2: main (main.c:339)
* Fix another warnings by cppcheck
[accel-pppd/ctrl/ipoe/arp.c:256]: (error) Uninitialized variable: n
[accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 5) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:90]: (warning) %x in format string (no. 6) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 5) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:129]: (warning) %x in format string (no. 6) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 5) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/mac_filter.c:158]: (warning) %x in format string (no. 6) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ctrl/pppoe/pppoe.c:738]: (warning) Possible null pointer dereference
[accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'int *'.
[accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ipv6/dhcpv6.c:911]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/libnetlink/libnetlink.c:515]: (warning) Possible null pointer dereference
[accel-pppd/ppp/ipv6cp_opt_intfid.c:185]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'int *'.
[accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 3) requires 'unsigned int *' but the argument type is 'signed int *'.
[accel-pppd/ppp/ipv6cp_opt_intfid.c:298]: (warning) %x in format string (no. 4) requires 'unsigned int *' but the argument type is 'signed int *'.
* Suppress compiler warnings
* Fix locking errors
/opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 279 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 279, 249.
/opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 333 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 333, 315.
/opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 422 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 422, 372.
/opt/pvs/accel-ppp/accel-pppd/extra/pppd_compat.c 488 warn V1020 The function exited without calling the 'sigchld_unlock' function. Check lines: 488, 468.
/opt/pvs/accel-ppp/accel-pppd/triton/mempool.c 119 warn V1020 The function exited without calling the 'pthread_spin_unlock' function. Check lines: 119, 116.
* Fix array len errors
/opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 75 warn V557 Array underrun is possible. The value of 'len - 1' index could reach -1.
/opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 76 warn V557 Array underrun is possible. The value of '-- len' index could reach -1.
* Fix possible memory leaks
/opt/pvs/accel-ppp/accel-pppd/radius/radius.c 936 err V773 The function was exited without releasing the 'str' pointer. A memory leak is possible.
/opt/pvs/accel-ppp/accel-pppd/radius/serv.c 622 err V773 The function was exited without releasing the 'str' pointer. A memory leak is possible.
/opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 144 err V773 The function was exited without releasing the 'raw' pointer. A memory leak is possible.
* Fix unsafe code
/opt/pvs/accel-ppp/accel-pppd/cli/tcp.c 364 warn V1004 The 'host' pointer was used unsafely after it was verified against nullptr. Check lines: 338, 364.
/opt/pvs/accel-ppp/accel-pppd/cli/telnet.c 701 warn V1004 The 'host' pointer was used unsafely after it was verified against nullptr. Check lines: 675, 701.
/opt/pvs/accel-ppp/accel-pppd/extra/ippool.c 241 err V614 Potentially uninitialized pointer 'pos' used.
/opt/pvs/accel-ppp/accel-pppd/radius/dict.c 165 err V614 Uninitialized pointer 'parent_items' used.
* Remove duplicate code
/opt/pvs/accel-ppp/accel-pppd/radius/serv.c 202 warn V547 Expression 'ts.tv_sec < req->serv->fail_time' is always false.
* Fix treating signed bool variables as unsigned
* Add nullptr checking
/opt/pvs/accel-ppp/accel-pppd/ipv6/dhcpv6.c 886 err V595 The 'opt->val' pointer was utilized before it was verified against nullptr. Check lines: 886, 890.
/opt/pvs/accel-ppp/accel-pppd/ipv6/nd.c 479 err V595 The 'opt->val' pointer was utilized before it was verified against nullptr. Check lines: 479, 483.
/opt/pvs/accel-ppp/accel-pppd/radius/auth.c 152 err V595 The 'rpd->auth_ctx' pointer was utilized before it was verified against nullptr. Check lines: 152, 154.
/opt/pvs/accel-ppp/accel-pppd/triton/conf_file.c 114 err V595 The 'cur_sect' pointer was utilized before it was verified against nullptr. Check lines: 114, 117.
* Add logging of exit conditions
* Clarify calculation
[accel-pppd/ppp/ccp_mppe.c:281]: (style) Clarify calculation precedence for '&' and '?'.
[accel-pppd/ppp/ccp_mppe.c:282]: (style) Clarify calculation precedence for '&' and '?'.
[accel-pppd/ppp/ccp_mppe.c:283]: (style) Clarify calculation precedence for '&' and '?'.
[accel-pppd/ppp/ccp_mppe.c:284]: (style) Clarify calculation precedence for '&' and '?'.
[accel-pppd/ppp/ccp_mppe.c:285]: (style) Clarify calculation precedence for '&' and '?'.
[accel-pppd/ppp/ccp_mppe.c:286]: (style) Clarify calculation precedence for '&' and '?'.
[drivers/ipoe/ipoe.c:307]: (style) Clarify calculation precedence for '&' and '?'.
* Fix void calculations
[accel-pppd/ctrl/pppoe/disc.c:211]: (portability) 'pkt' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/ctrl/pptp/pptp.c:150]: (portability) 'buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/radius/acct.c:37]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/radius/auth.c:35]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/radius/auth.c:79]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/radius/dm_coa.c:43]: (portability) 'pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/radius/dm_coa.c:47]: (portability) 'pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/radius/dm_coa.c:57]: (portability) 'pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/radius/dm_coa.c:65]: (portability) 'req.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/radius/dm_coa.c:97]: (portability) 'req.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/radius/serv.c:364]: (portability) 'req.pack.buf' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/triton/mempool.c:115]: (portability) 'mmap_ptr' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/triton/mempool.c:122]: (portability) 'mmap_ptr' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/triton/mempool.c:276]: (portability) 'ptr' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
* Fix void part 2
[accel-pppd/ipv6/dhcpv6.c:844]: (portability) 'conf_dnssl' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/ipv6/nd.c:199]: (portability) '(void*)dnsslinfo' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
[accel-pppd/ipv6/nd.c:432]: (portability) 'conf_dnssl' is of type 'void *'. When using void pointers in calculations, the behaviour is undefined.
* Fix null pointer dereference
[accel-pppd/ctrl/ipoe/ipoe.c:2048]: (warning) Possible null pointer dereference: eth
[accel-pppd/ctrl/ipoe/ipoe.c:2049]: (warning) Possible null pointer dereference: iph
* Remove redundant check
/opt/pvs/accel-ppp/accel-pppd/ctrl/l2tp/packet.c 656 warn V547 Expression 'attr->length <= 16' is always false.
* PR fixes
* PR fixes 2
|
|
|
|
once radius server has returned User-Name attribute in Access-Accept
packet, it'll be used for any subsequent Accounting-Request packets
instead of internal username per RFC2865 5.1
other way of just replacing session username is possible, but not
desired at the moment due potential issues with single-session modes
in case of different ppp logins / ipoe macs and same contract number
returned by radius for that accounts.
|
|
Framed-IPv6-Route is the IPv6 counterpart of Framed-Route. It's only
used for defining routes to be added locally by accel-ppp. Routes that
should be announced to the peer using Router Advertisements should be
defined in the Route-IPv6-Information attribute (but that's currently
not implemented).
Framed-IPv6-Route format is:
<network in CIDR notation> [<gateway IPv6 address> [<route metric>]]
The gateway address and the route metric are optionals, but the metric
can only be set if a gateway address is given. One can use the
unspecified address '::' to define a route with no gateway and a
non-default route metric.
When no gateway address is defined, the session's network interface is
used directly.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
|
|
Let an optional route priority (aka metric) be defined in RADIUS
Framed-Route attributes.
The priority is an integer placed at the end of the route string. This
is backward compatible with the previous format and also conforms with
the recommended format defined by RFC 2865 (although we don't allow
multiple metrics).
Framed-Route format is:
<network> [<gateway> [<priority>]]
For example, 'Framed-Route = "192.0.2.0/24 203.0.113.1 8"' will let
the following route be installed (assuming 203.0.113.1 is routed
through eth0):
$ ip route show
[...]
192.0.2.0/24 via 203.0.113.1 dev eth0 metric 8
It's possible to use the unspecified gateway (0.0.0.0) if one wants to
set a priority without specifying a gateway address.
Finally, route deletion now also takes the priority into account, in
order to avoid removing a different route accidentally.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
|
|
to get radius object use session:module("radius") function
radius object provides flollowing functions:
radius:attrs() - returns array of attributes {"name" = NAME, "vendor" = VENDOR|nil}
radius:attr(name[,vendor]) - returns value of attribute (may return multiple results)
Example:
function ip_up(ses)
rad = ses:module("radius")
attrs = rad:attrs()
if attrs then
print("attrs:")
for _,a in pairs(attrs) do
io.write("\t")
if a.vendor then io.write(a.vendor..":") end
io.write(a.name.."=")
print(rad:attr(a.name, a.vendor))
end
end
end
|
|
1 - is high priority queue for Access-Request and Account-Request(Start)
2 - is low priority queue for Account-Request(Alive) and Account-Request(Stop)
This patch intended to prioritize sessions connecting requests over disconnects and interim updates.
|
|
|
|
|
|
Framed-Route has following syntax: Framed-Route=address[/mask] [gateway]
If gateway is not specified then route would be attached to session interface.
|
|
and Session-Timeout attributes
|
|
|
|
Before this patch any single fail (no responce for max_try requests) caused radius server to enter "fail" state,
which may be unwanted behaviour, because radius may not respond for interim Accounting-Request by some reasons.
This patch introduces "max-fail" option which specifies number of unreplied requests in a row after which server enters into "fail" state.
(Actual only for multi-server configurations)
|
|
|
|
|
|
|
|
|
|
This patch gets rid of synchronuos style of authentication/accounting.
Synchronous style of authentication/accounting produced sleeping threads
which becomes a problem when lots of sessions started/stopped and all they want authorization/accounting.
|
|
If specified then accel-ppp will send tunnel type as string (pppoe,pptp,l2tp,ipoe).
|
|
New options are applied to server option as server=...[,weight=x][,backup]
Weight is used for multi-server configurations (larger weight takes more users).
Backup is used to mark backup server f.e. server which will be used only if all other servers are failed.
|
|
|
|
Acct-Status-Type=Accounting-On on startup and Acct-Status-Type=Accounting-Off on shutdown
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
project without RADIUS to switch to chap-secrets)
|
|
|
