Github: update translations

1 files changed, 34 insertions, 14 deletions

diff --git a/docs/_locale/ja/cli.pot b/docs/_locale/ja/cli.pot
index c5981e8e..09dede28 100644
--- a/docs/_locale/ja/cli.pot
+++ b/docs/_locale/ja/cli.pot
@@ -124,15 +124,19 @@ msgstr "For example typing ``sh`` followed by the ``TAB`` key will complete to `
 msgid "Get a collection of all the set commands required which led to the running configuration."
 msgstr "Get a collection of all the set commands required which led to the running configuration."
 
-#: ../../cli.rst:930
+#: ../../cli.rst:933
 msgid "If you are remotely connected, you will lose your connection. You may want to copy first the config, edit it to ensure connectivity, and load the edited config."
 msgstr "If you are remotely connected, you will lose your connection. You may want to copy first the config, edit it to ensure connectivity, and load the edited config."
 
-#: ../../cli.rst:916
+#: ../../cli.rst:919
 msgid "In the case you want to completely delete your configuration and restore the default one, you can enter the following command in configuration mode:"
 msgstr "In the case you want to completely delete your configuration and restore the default one, you can enter the following command in configuration mode:"
 
 #: ../../cli.rst:413
+msgid "It is also possible to display all :cfgcmd:`set` commands within configuration mode using :cfgcmd:`show | commands`"
+msgstr "It is also possible to display all :cfgcmd:`set` commands within configuration mode using :cfgcmd:`show | commands`"
+
+#: ../../cli.rst:413
 msgid "It is also possible to display all `set` commands within configuration mode using :cfgcmd:`show | commands`"
 msgstr "It is also possible to display all `set` commands within configuration mode using :cfgcmd:`show | commands`"
 
@@ -168,7 +172,7 @@ msgstr "Remote Archive"
 msgid "Rename a configuration element."
 msgstr "Rename a configuration element."
 
-#: ../../cli.rst:914
+#: ../../cli.rst:917
 msgid "Restore Default"
 msgstr "Restore Default"
 
@@ -184,7 +188,7 @@ msgstr "Rollback Changes"
 msgid "Rollback to revision N (currently requires reboot)"
 msgstr "Rollback to revision N (currently requires reboot)"
 
-#: ../../cli.rst:881
+#: ../../cli.rst:884
 msgid "Saving and loading manually"
 msgstr "Saving and loading manually"
 
@@ -244,11 +248,11 @@ msgstr "The configuration can be edited by the use of :cfgcmd:`set` and :cfgcmd:
 msgid "The current hierarchy level can be changed by the :cfgcmd:`edit` command."
 msgstr "The current hierarchy level can be changed by the :cfgcmd:`edit` command."
 
-#: ../../cli.rst:869
+#: ../../cli.rst:872
 msgid "The number of revisions don't affect the commit-archive."
 msgstr "The number of revisions don't affect the commit-archive."
 
-#: ../../cli.rst:927
+#: ../../cli.rst:930
 msgid "Then you may want to :cfgcmd:`save` in order to delete the saved configuration too."
 msgstr "Then you may want to :cfgcmd:`save` in order to delete the saved configuration too."
 
@@ -280,7 +284,7 @@ msgstr "To remove an existing comment from your current configuration, specify a
 msgid "Use the ``show configuration commands | strip-private`` command when you want to hide private data. You may want to do so if you want to share your configuration on the `forum`_."
 msgstr "Use the ``show configuration commands | strip-private`` command when you want to hide private data. You may want to do so if you want to share your configuration on the `forum`_."
 
-#: ../../cli.rst:892
+#: ../../cli.rst:895
 msgid "Use this command to load a configuration which will replace the running configuration. Define the location of the configuration file to be loaded. You can use a path to a local file, an SCP address, an SFTP address, an FTP address, an HTTP address, an HTTPS address or a TFTP address."
 msgstr "Use this command to load a configuration which will replace the running configuration. Define the location of the configuration file to be loaded. You can use a path to a local file, an SCP address, an SFTP address, an FTP address, an HTTP address, an HTTPS address or a TFTP address."
 
@@ -352,7 +356,7 @@ msgstr "When inside configuration mode you are not directly able to execute oper
 msgid "When the output of a command results in more lines than can be displayed on the terminal screen the output is paginated as indicated by a ``:`` prompt."
 msgstr "When the output of a command results in more lines than can be displayed on the terminal screen the output is paginated as indicated by a ``:`` prompt."
 
-#: ../../cli.rst:886
+#: ../../cli.rst:889
 msgid "When using the save_ command, you can add a specific location where to store your configuration file. And, when needed it, you will be able to load it with the ``load`` command:"
 msgstr "When using the save_ command, you can add a specific location where to store your configuration file. And, when needed it, you will be able to load it with the ``load`` command:"
 
@@ -364,6 +368,10 @@ msgstr "When viewing in page mode the following commands are available:"
 msgid "You are now in a sublevel relative to ``interfaces ethernet eth0``, all commands executed from this point on are relative to this sublevel. Use eithe the :cfgcmd:`top` or :cfgcmd:`exit` command to go back to the top of the hierarchy. You can also use the :cfgcmd:`up` command to move only one level up at a time."
 msgstr "You are now in a sublevel relative to ``interfaces ethernet eth0``, all commands executed from this point on are relative to this sublevel. Use eithe the :cfgcmd:`top` or :cfgcmd:`exit` command to go back to the top of the hierarchy. You can also use the :cfgcmd:`up` command to move only one level up at a time."
 
+#: ../../cli.rst:370
+msgid "You are now in a sublevel relative to ``interfaces ethernet eth0``, all commands executed from this point on are relative to this sublevel. Use either the :cfgcmd:`top` or :cfgcmd:`exit` command to go back to the top of the hierarchy. You can also use the :cfgcmd:`up` command to move only one level up at a time."
+msgstr "You are now in a sublevel relative to ``interfaces ethernet eth0``, all commands executed from this point on are relative to this sublevel. Use either the :cfgcmd:`top` or :cfgcmd:`exit` command to go back to the top of the hierarchy. You can also use the :cfgcmd:`up` command to move only one level up at a time."
+
 #: ../../cli.rst:618
 msgid "You can also rename config subtrees:"
 msgstr "You can also rename config subtrees:"
@@ -384,15 +392,15 @@ msgstr "You can scroll up with the keys ``[Shift]+[PageUp]`` and scroll down wit
 msgid "You can specify the number of revisions stored on disk. N can be in the range of 0 - 65535. When the number of revisions exceeds the configured value, the oldest revision is removed. The default setting for this value is to store 100 revisions locally."
 msgstr "You can specify the number of revisions stored on disk. N can be in the range of 0 - 65535. When the number of revisions exceeds the configured value, the oldest revision is removed. The default setting for this value is to store 100 revisions locally."
 
-#: ../../cli.rst:883
+#: ../../cli.rst:886
 msgid "You can use the ``save`` and ``load`` commands if you want to manually manage specific configuration files."
 msgstr "You can use the ``save`` and ``load`` commands if you want to manually manage specific configuration files."
 
-#: ../../cli.rst:871
+#: ../../cli.rst:874
 msgid "You may find VyOS not allowing the secure connection because it cannot verify the legitimacy of the remote server. You can use the workaround below to quickly add the remote host's SSH fingerprint to your ``~/.ssh/known_hosts`` file:"
 msgstr "You may find VyOS not allowing the secure connection because it cannot verify the legitimacy of the remote server. You can use the workaround below to quickly add the remote host's SSH fingerprint to your ``~/.ssh/known_hosts`` file:"
 
-#: ../../cli.rst:924
+#: ../../cli.rst:927
 msgid "You will be asked if you want to continue. If you accept, you will have to use :cfgcmd:`commit` if you want to make the changes active."
 msgstr "You will be asked if you want to continue. If you accept, you will have to use :cfgcmd:`commit` if you want to make the changes active."
 
@@ -404,6 +412,18 @@ msgstr "``b`` will scroll back one page"
 msgid "``ftp://<user>:<passwd>@<host>/<dir>``"
 msgstr "``ftp://<user>:<passwd>@<host>/<dir>``"
 
+#: ../../cli.rst:870
+msgid "``git+https://<user>:<passwd>@<host>/<path>``"
+msgstr "``git+https://<user>:<passwd>@<host>/<path>``"
+
+#: ../../cli.rst:864
+msgid "``http://<user>:<passwd>@<host>:/<dir>``"
+msgstr "``http://<user>:<passwd>@<host>:/<dir>``"
+
+#: ../../cli.rst:865
+msgid "``https://<user>:<passwd>@<host>:/<dir>``"
+msgstr "``https://<user>:<passwd>@<host>:/<dir>``"
+
 #: ../../cli.rst:71
 msgid "``left-arrow`` and ``right-arrow`` can be used to scroll left or right in the event that the output has lines which exceed the terminal size."
 msgstr "``left-arrow`` and ``right-arrow`` can be used to scroll left or right in the event that the output has lines which exceed the terminal size."
@@ -416,11 +436,11 @@ msgstr "``q`` key can be used to cancel output"
 msgid "``return`` will scroll down one line"
 msgstr "``return`` will scroll down one line"
 
-#: ../../cli.rst:864
+#: ../../cli.rst:868
 msgid "``scp://<user>:<passwd>@<host>:/<dir>``"
 msgstr "``scp://<user>:<passwd>@<host>:/<dir>``"
 
-#: ../../cli.rst:865
+#: ../../cli.rst:867
 msgid "``sftp://<user>:<passwd>@<host>/<dir>``"
 msgstr "``sftp://<user>:<passwd>@<host>/<dir>``"
 
@@ -428,7 +448,7 @@ msgstr "``sftp://<user>:<passwd>@<host>/<dir>``"
 msgid "``space`` will scroll down one page"
 msgstr "``space`` will scroll down one page"
 
-#: ../../cli.rst:867
+#: ../../cli.rst:869
 msgid "``tftp://<host>/<dir>``"
 msgstr "``tftp://<host>/<dir>``"