bgp: adjust to new CLI syntax where local-as is an individual leafNode

2 files changed, 48 insertions, 39 deletions

diff --git a/docs/configuration/protocols/bfd.rst b/docs/configuration/protocols/bfd.rst
index 8d19334c..e5153667 100644
--- a/docs/configuration/protocols/bfd.rst
+++ b/docs/configuration/protocols/bfd.rst
@@ -10,7 +10,7 @@ BFD
 the following RFCs: :rfc:`5880`, :rfc:`5881` and :rfc:`5883`.
 
 In the age of very fast networks, a second of unreachability may equal millions of lost packets.
-The idea behind BFD is to detect very quickly when a peer is down and take action extremely fast. 
+The idea behind BFD is to detect very quickly when a peer is down and take action extremely fast.
 
 BFD sends lots of small UDP packets very quickly to ensures that the peer is still alive.
 
@@ -31,7 +31,7 @@ Configure BFD
 
    Allow this BFD peer to not be directly connected
 
-.. cfgcmd:: set protocols bfd peer <address> source 
+.. cfgcmd:: set protocols bfd peer <address> source
    [address <address> | interface <interface>]
 
    Bind listener to specifid interface/address, mandatory for IPv6
@@ -45,7 +45,7 @@ Configure BFD
 
    Remote transmission interval will be multiplied by this value
 
-.. cfgcmd:: set protocols bfd peer <address> interval 
+.. cfgcmd:: set protocols bfd peer <address> interval
    [receive | transmit] <10-60000>
 
    Interval in milliseconds
@@ -58,11 +58,11 @@ Configure BFD
 Enable BFD in BGP
 -----------------
 
-.. cfgcmd:: set protocols bgp <asn> neighbor <address> bfd
+.. cfgcmd:: set protocols bgp neighbor <neighbor> bfd
 
    Enable BFD on a single BGP neighbor
 
-.. cfgcmd:: set protocols bgp <asn> peer-group <group> bfd
+.. cfgcmd:: set protocols bgp peer-group <neighbor> bfd
 
    Enable BFD on a BGP peer group
 
diff --git a/docs/configuration/protocols/bgp.rst b/docs/configuration/protocols/bgp.rst
index 2ef7c247..f1f15f38 100644
--- a/docs/configuration/protocols/bgp.rst
+++ b/docs/configuration/protocols/bgp.rst
@@ -897,15 +897,14 @@ between these sub-ASes we use something that looks like EBGP but behaves like
 IBGP (called confederation BGP). Confederation mechanism is described in
 :rfc:`5065`
 
-.. cfgcmd:: set protocols bgp <subasn> parameters confederation identifier
+.. cfgcmd:: set protocols bgp parameters confederation identifier
    <asn>
 
    This command specifies a BGP confederation identifier. <asn> is the number
    of the autonomous system that internally includes multiple sub-autonomous
-   systems (a confederation). <subasn> is the number sub-autonomous system
-   inside <asn>.
+   systems (a confederation).
 
-.. cfgcmd:: set protocols bgp <subasn> parameters confederation confederation
+.. cfgcmd:: set protocols bgp parameters confederation confederation
    peers <nsubasn>
 
    This command sets other confederations <nsubasn> as members of autonomous
@@ -1070,21 +1069,23 @@ A simple eBGP configuration:
 
 .. code-block:: none
 
-  set protocols bgp 65534 neighbor 192.168.0.2 ebgp-multihop '2'
-  set protocols bgp 65534 neighbor 192.168.0.2 remote-as '65535'
-  set protocols bgp 65534 neighbor 192.168.0.2 update-source '192.168.0.1'
-  set protocols bgp 65534 address-family ipv4-unicast network '172.16.0.0/16'
-  set protocols bgp 65534 parameters router-id '192.168.0.1'
+  set protocols bgp local-as 65534
+  set protocols bgp neighbor 192.168.0.2 ebgp-multihop '2'
+  set protocols bgp neighbor 192.168.0.2 remote-as '65535'
+  set protocols bgp neighbor 192.168.0.2 update-source '192.168.0.1'
+  set protocols bgp address-family ipv4-unicast network '172.16.0.0/16'
+  set protocols bgp parameters router-id '192.168.0.1'
 
 **Node 2:**
 
 .. code-block:: none
 
-  set protocols bgp 65535 neighbor 192.168.0.1 ebgp-multihop '2'
-  set protocols bgp 65535 neighbor 192.168.0.1 remote-as '65534'
-  set protocols bgp 65535 neighbor 192.168.0.1 update-source '192.168.0.2'
-  set protocols bgp 65535 address-family ipv4-unicast network '172.17.0.0/16'
-  set protocols bgp 65535 parameters router-id '192.168.0.2'
+  set protocols bgp local-as 65535
+  set protocols bgp neighbor 192.168.0.1 ebgp-multihop '2'
+  set protocols bgp neighbor 192.168.0.1 remote-as '65534'
+  set protocols bgp neighbor 192.168.0.1 update-source '192.168.0.2'
+  set protocols bgp address-family ipv4-unicast network '172.17.0.0/16'
+  set protocols bgp parameters router-id '192.168.0.2'
 
 
 Don't forget, the CIDR declared in the network statement MUST **exist in your
@@ -1113,23 +1114,25 @@ A simple BGP configuration via IPv6.
 
 .. code-block:: none
 
-  set protocols bgp 65534 neighbor 2001:db8::2 ebgp-multihop '2'
-  set protocols bgp 65534 neighbor 2001:db8::2 remote-as '65535'
-  set protocols bgp 65534 neighbor 2001:db8::2 update-source '2001:db8::1'
-  set protocols bgp 65534 neighbor 2001:db8::2 address-family ipv6-unicast
-  set protocols bgp 65534 address-family ipv6-unicast network '2001:db8:1::/48'
-  set protocols bgp 65534 parameters router-id '10.1.1.1'
+  set protocols bgp local-as 65534
+  set protocols bgp neighbor 2001:db8::2 ebgp-multihop '2'
+  set protocols bgp neighbor 2001:db8::2 remote-as '65535'
+  set protocols bgp neighbor 2001:db8::2 update-source '2001:db8::1'
+  set protocols bgp neighbor 2001:db8::2 address-family ipv6-unicast
+  set protocols bgp address-family ipv6-unicast network '2001:db8:1::/48'
+  set protocols bgp parameters router-id '10.1.1.1'
 
 **Node 2:**
 
 .. code-block:: none
 
-  set protocols bgp 65535 neighbor 2001:db8::1 ebgp-multihop '2'
-  set protocols bgp 65535 neighbor 2001:db8::1 remote-as '65534'
-  set protocols bgp 65535 neighbor 2001:db8::1 update-source '2001:db8::2'
-  set protocols bgp 65535 neighbor 2001:db8::1 address-family ipv6-unicast
-  set protocols bgp 65535 address-family ipv6-unicast network '2001:db8:2::/48'
-  set protocols bgp 65535 parameters router-id '10.1.1.2'
+  set protocols bgp local-as 65535
+  set protocols bgp neighbor 2001:db8::1 ebgp-multihop '2'
+  set protocols bgp neighbor 2001:db8::1 remote-as '65534'
+  set protocols bgp neighbor 2001:db8::1 update-source '2001:db8::2'
+  set protocols bgp neighbor 2001:db8::1 address-family ipv6-unicast
+  set protocols bgp address-family ipv6-unicast network '2001:db8:2::/48'
+  set protocols bgp parameters router-id '10.1.1.2'
 
 Don't forget, the CIDR declared in the network statement **MUST exist in your
 routing table (dynamic or static), the best way to make sure that is true is
@@ -1164,6 +1167,7 @@ Route filter can be applied using a route-map:
   set policy prefix-list6 AS65535-IN rule 10 prefix '2001:db8:2::/48'
   set policy prefix-list6 AS65535-OUT rule 10 action 'deny'
   set policy prefix-list6 AS65535-OUT rule 10 prefix '2001:db8:2::/48'
+
   set policy route-map AS65535-IN rule 10 action 'permit'
   set policy route-map AS65535-IN rule 10 match ip address prefix-list 'AS65535-IN'
   set policy route-map AS65535-IN rule 10 match ipv6 address prefix-list 'AS65535-IN'
@@ -1172,10 +1176,12 @@ Route filter can be applied using a route-map:
   set policy route-map AS65535-OUT rule 10 match ip address prefix-list 'AS65535-OUT'
   set policy route-map AS65535-OUT rule 10 match ipv6 address prefix-list 'AS65535-OUT'
   set policy route-map AS65535-OUT rule 20 action 'permit'
-  set protocols bgp 65534 neighbor 2001:db8::2 address-family ipv4-unicast route-map export 'AS65535-OUT'
-  set protocols bgp 65534 neighbor 2001:db8::2 address-family ipv4-unicast route-map import 'AS65535-IN'
-  set protocols bgp 65534 neighbor 2001:db8::2 address-family ipv6-unicast route-map export 'AS65535-OUT'
-  set protocols bgp 65534 neighbor 2001:db8::2 address-family ipv6-unicast route-map import 'AS65535-IN'
+
+  set protocols bgp local-as 65534
+  set protocols bgp neighbor 2001:db8::2 address-family ipv4-unicast route-map export 'AS65535-OUT'
+  set protocols bgp neighbor 2001:db8::2 address-family ipv4-unicast route-map import 'AS65535-IN'
+  set protocols bgp neighbor 2001:db8::2 address-family ipv6-unicast route-map export 'AS65535-OUT'
+  set protocols bgp neighbor 2001:db8::2 address-family ipv6-unicast route-map import 'AS65535-IN'
 
 **Node2:**
 
@@ -1189,6 +1195,7 @@ Route filter can be applied using a route-map:
   set policy prefix-list6 AS65534-IN rule 10 prefix '2001:db8:1::/48'
   set policy prefix-list6 AS65534-OUT rule 10 action 'deny'
   set policy prefix-list6 AS65534-OUT rule 10 prefix '2001:db8:1::/48'
+
   set policy route-map AS65534-IN rule 10 action 'permit'
   set policy route-map AS65534-IN rule 10 match ip address prefix-list 'AS65534-IN'
   set policy route-map AS65534-IN rule 10 match ipv6 address prefix-list 'AS65534-IN'
@@ -1197,10 +1204,12 @@ Route filter can be applied using a route-map:
   set policy route-map AS65534-OUT rule 10 match ip address prefix-list 'AS65534-OUT'
   set policy route-map AS65534-OUT rule 10 match ipv6 address prefix-list 'AS65534-OUT'
   set policy route-map AS65534-OUT rule 20 action 'permit'
-  set protocols bgp 65535 neighbor 2001:db8::1 address-family ipv4-unicast route-map export 'AS65534-OUT'
-  set protocols bgp 65535 neighbor 2001:db8::1 address-family ipv4-unicast route-map import 'AS65534-IN'
-  set protocols bgp 65535 neighbor 2001:db8::1 address-family ipv6-unicast route-map export 'AS65534-OUT'
-  set protocols bgp 65535 neighbor 2001:db8::1 address-family ipv6-unicast route-map import 'AS65534-IN'
+
+  set protocols bgp local-as 65535
+  set protocols bgp neighbor 2001:db8::1 address-family ipv4-unicast route-map export 'AS65534-OUT'
+  set protocols bgp neighbor 2001:db8::1 address-family ipv4-unicast route-map import 'AS65534-IN'
+  set protocols bgp neighbor 2001:db8::1 address-family ipv6-unicast route-map export 'AS65534-OUT'
+  set protocols bgp neighbor 2001:db8::1 address-family ipv6-unicast route-map import 'AS65534-IN'
 
 We could expand on this and also deny link local and multicast in the rule 20
 action deny.