Revert "openfabric: T6652: OpenFabric protocol documentation"revert-1544-T6652-current

1 files changed, 0 insertions, 239 deletions

diff --git a/docs/configuration/protocols/openfabric.rst b/docs/configuration/protocols/openfabric.rst
deleted file mode 100644
index f7126544..00000000
--- a/docs/configuration/protocols/openfabric.rst
+++ /dev/null
@@ -1,239 +0,0 @@
-.. _openfabric:
-
-#####
-OpenFabric
-#####
-
-OpenFabric, specified in `draft-white-openfabric-06.txt
-<https://datatracker.ietf.org/doc/html/draft-white-openfabric-06>`_, is
-a routing protocol derived from IS-IS, providing link-state routing with
-efficient flooding for topologies like spine-leaf networks.
-
-OpenFabric a dual stack protocol.
-A single OpenFabric instance is able to perform routing for both IPv4 and IPv6.
-
-*******
-General
-*******
-
-Configuration
-=============
-
-Mandatory Settings
-------------------
-
-For OpenFabric to operate correctly, one must do the equivalent of a Router ID
-in Connectionless Network Service (CLNS). This Router ID is called the
-:abbr:`NET (Network Entity Title)`. The system identifier must be unique within
-the network
-
-.. cfgcmd:: set protocols openfabric net <network-entity-title>
-
-  This command sets network entity title (NET) provided in ISO format.
-
-  Here is an example :abbr:`NET (Network Entity Title)` value:
-
-  .. code-block:: none
-
-    49.0001.1921.6800.1002.00
-
-  The CLNS address consists of the following parts:
-
-  * :abbr:`AFI (Address family authority identifier)` - ``49`` The AFI value
-    49 is what OpenFabric uses for private addressing.
-
-  * Area identifier: ``0001`` OpenFabric area number (numerical area ``1``)
-
-  * System identifier: ``1921.6800.1002`` - for system identifiers we recommend
-    to use IP address or MAC address of the router itself. The way to construct
-    this is to keep all of the zeroes of the router IP address, and then change
-    the periods from being every three numbers to every four numbers. The
-    address that is listed here is ``192.168.1.2``, which if expanded will turn
-    into ``192.168.001.002``. Then all one has to do is move the dots to have
-    four numbers instead of three. This gives us ``1921.6800.1002``.
-
-  * :abbr:`NET (Network Entity Title)` selector: ``00`` Must always be 00. This
-    setting indicates "this system" or "local system."
-
-.. cfgcmd:: set protocols openfabric domain <name> interface <interface>
-   address-family <ipv4|ipv6>
-
-  This command enables OpenFabric instance with <NAME> on this interface, and
-  allows for adjacency to occur for address family (IPv4 or IPv6 or both).
-
-OpenFabric Global Configuration
---------------------------
-
-.. cfgcmd:: set protocols openfabric domain-password <plaintext-password|md5>
-  <password>
-
-  This command configures the authentication password for a routing domain,
-  as clear text or md5 one.
-
-.. cfgcmd:: set protocols openfabric domain <name> purge-originator
-
-  This command enables :rfc:`6232` purge originator identification.
-
-.. cfgcmd:: set protocols openfabric domain <name> set-overload-bit
-
-  This command sets overload bit to avoid any transit traffic through this
-  router.
-
-.. cfgcmd:: set protocols openfabric domain <name> log-adjacency-changes
-
-  Log changes in adjacency state.
-  
-.. cfgcmd:: set protocols openfabric domain <name> fabric-tier <number>
-
-  This command sets a static tier number to advertise as location
-  in the fabric.
-
-
-Interface Configuration
------------------------
-
-.. cfgcmd:: set protocols openfabric interface <interface> hello-interval
-  <seconds>
-
-  This command sets hello interval in seconds on a given interface.
-  The range is 1 to 600. Hello packets are used to establish and maintain
-  adjacency between OpenFabric neighbors.
-
-.. cfgcmd:: set protocols openfabric domain <name> interface <interface>
-   hello-multiplier <number>
-
-  This command sets multiplier for hello holding time on a given
-  interface. The range is 2 to 100.
-
-.. cfgcmd:: set protocols openfabric domain <name> interface <interface>
-   metric <metric>
-
-  This command sets default metric for circuit.
-  The metric range is 1 to 16777215.
-
-.. cfgcmd:: set protocols openfabric interface <interface> passive
-
-  This command enables the passive mode for this interface.
-
-.. cfgcmd:: set protocols openfabric domain <name> interface <interface>
-   password plaintext-password <text>
-
-  This command sets the authentication password for the interface.
-
-.. cfgcmd:: set protocols openfabric domain <name> interface <interface>
-   csnp-interval <seconds>
-
-  This command sets Complete Sequence Number Packets (CSNP) interval in seconds.
-  The interval range is 1 to 600.
-
-.. cfgcmd:: set protocols openfabric domain <name> interface <interface>
-   psnp-interval <number>
-
-  This command sets Partial Sequence Number Packets (PSNP) interval in seconds.
-  The interval range is 1 to 120.
-
-Timers
-------
-
-.. cfgcmd:: set protocols openfabric domain <name> lsp-gen-interval <seconds>
-
-  This command sets minimum interval at which link-state packets (LSPs) are
-  generated. The interval range is 1 to 120.
-
-.. cfgcmd:: set protocols openfabric domain <name> lsp-refresh-interval <seconds>
-
-  This command sets LSP refresh interval in seconds. The interval range
-  is 1 to 65235.
-
-.. cfgcmd:: set protocols openfabric domain <name> max-lsp-lifetime <seconds>
-
-  This command sets LSP maximum LSP lifetime in seconds. The interval range
-  is 360 to 65535. LSPs remain in a database for 1200 seconds by default.
-  If they are not refreshed by that time, they are deleted. You can change
-  the LSP refresh interval or the LSP lifetime. The LSP refresh interval
-  should be less than the LSP lifetime or else LSPs will time out before
-  they are refreshed.
-
-.. cfgcmd:: set protocols openfabric domain <name> spf-interval <seconds>
-
-  This command sets minimum interval between consecutive shortest path first
-  (SPF) calculations in seconds.The interval range is 1 to 120.
-
-
-********
-Examples
-********
-
-Enable OpenFabric
-============
-
-**Node 1:**
-
-.. code-block:: none
-
-  set interfaces loopback lo address '192.168.255.255/32'
-  set interfaces ethernet eth1 address '192.0.2.1/24'
-
-  set protocols openfabric domain VyOS interface eth1 address-family ipv4
-  set protocols openfabric domain VyOS interface lo address-family ipv4
-  set protocols openfabric net '49.0001.1921.6825.5255.00'
-
-**Node 2:**
-
-.. code-block:: none
-
-  set interfaces loopback lo address '192.168.255.254/32'
-  set interfaces ethernet eth1 address '192.0.2.2/24'
-
-  set protocols openfabric domain VyOS interface eth1 address-family ipv4
-  set protocols openfabric domain VyOS interface lo address-family ipv4
-  set protocols openfabric net '49.0001.1921.6825.5254.00'
-
-
-
-This gives us the following neighborships:
-
-.. code-block:: none
-
-  Node-1@vyos:~$ show openfabric neighbor
-  show openfabric neighbor
-  Area VyOS:
-    System Id           Interface   L  State        Holdtime SNPA
-   vyos                eth1        2  Up            27       2020.2020.2020
-
-
-  Node-2@vyos:~$ show openfabric neighbor
-  show openfabric neighbor
-  Area VyOS:
-    System Id           Interface   L  State        Holdtime SNPA
-   vyos                eth1        2  Up            30       2020.2020.2020
-
-
-
-Here's the IP routes that are populated:
-
-.. code-block:: none
-
-  Node-1@vyos:~$ show ip route openfabric
-  show ip route openfabric
-  Codes: K - kernel route, C - connected, S - static, R - RIP,
-         O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
-         T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
-         f - OpenFabric,
-         > - selected route, * - FIB route, q - queued, r - rejected, b - backup
-         t - trapped, o - offload failure
-
-  f   192.0.2.0/24 [115/20] via 192.0.2.2, eth1 onlink, weight 1, 00:00:10
-  f>* 192.168.255.254/32 [115/20] via 192.0.2.2, eth1 onlink, weight 1, 00:00:10
-
-  Node-2@vyos:~$ show ip route openfabric
-  show ip route openfabric
-  Codes: K - kernel route, C - connected, S - static, R - RIP,
-         O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
-         T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
-         f - OpenFabric,
-         > - selected route, * - FIB route, q - queued, r - rejected, b - backup
-         t - trapped, o - offload failure
-
-  f   192.0.2.0/24 [115/20] via 192.0.2.1, eth1 onlink, weight 1, 00:00:48
-  f>* 192.168.255.255/32 [115/20] via 192.0.2.1, eth1 onlink, weight 1, 00:00:48