remove all enclosing '' from cfgcmd/opcmd

1 files changed, 5 insertions, 5 deletions

diff --git a/docs/routing/bgp.rst b/docs/routing/bgp.rst
index d8860e15..14ea1238 100644
--- a/docs/routing/bgp.rst
+++ b/docs/routing/bgp.rst
@@ -159,14 +159,14 @@ BGP Router Configuration
 ASN and Router ID
 -----------------
 
-.. cfgcmd:: set protocols bgp '<ASN>'
+.. cfgcmd:: set protocols bgp <asn>
 
    First of all you must configure BGP router with the :abbr:`ASN (Autonomous
    System Number)`. The AS number is an identifier for the autonomous system.
    The BGP protocol uses the AS number for detecting whether the BGP connection
    is internal or external.
 
-.. cfgcmd:: set protocols bgp '<ASN>' parameters router-id
+.. cfgcmd:: set protocols bgp <asn> parameters router-id
 
    This command specifies the router-ID. If router ID is not specified it will
    use the highest interface IP address.
@@ -174,19 +174,19 @@ ASN and Router ID
 Route Selection
 ---------------
 
-.. cfgcmd:: set protocols bgp '<ASN>' parameters bestpath as-path confed
+.. cfgcmd:: set protocols bgp <asn> parameters bestpath as-path confed
 
    This command specifies that the length of confederation path sets and
    sequences should should be taken into account during the BGP best path
    decision process.
 
-.. cfgcmd:: set protocols bgp '<ASN>' parameters bestpath as-path multipath-relax
+.. cfgcmd:: set protocols bgp <asn> parameters bestpath as-path multipath-relax
 
    This command specifies that BGP decision process should consider paths
    of equal AS_PATH length candidates for multipath computation. Without
    the knob, the entire AS_PATH must match for multipath computation.
 
-.. cfgcmd:: set protocols bgp '<ASN>' parameters bestpath as-path ignore
+.. cfgcmd:: set protocols bgp <asn> parameters bestpath as-path ignore
 
    Ignore AS_PATH length when selecting a route