Update pppoe-server.rst

1 files changed, 32 insertions, 0 deletions

diff --git a/docs/services/pppoe-server.rst b/docs/services/pppoe-server.rst
index 17aee82a..24b6b76c 100644
--- a/docs/services/pppoe-server.rst
+++ b/docs/services/pppoe-server.rst
@@ -80,6 +80,37 @@ server configured, if you wish to achieve redundancy.
 
 RADIUS provides the IP addresses in the example above via Framed-IP-Address.
 
+**RADIUS sessions management DM/CoA**
+For remotely disconnect sessions and change some authentication parameters you can configure dae-server
+
+.. code-block:: sh
+
+  set service pppoe-server authentication radius-settings dae-server ip-address '10.1.1.2'
+  set service pppoe-server authentication radius-settings dae-server port '3799'
+  set service pppoe-server authentication radius-settings dae-server secret 'secret123'
+
+Example, from radius-server send command for disconnect client with username test
+
+.. code-block:: sh
+
+  root@radius-server:~# echo "User-Name=test" | radclient -x 10.1.1.2:3799 disconnect secret123
+  
+You can also use another attributes for identify client for disconnect, like Framed-IP-Address, Acct-Session-Id, etc.
+Result commands appears in log
+
+.. code-block:: sh
+
+  show log | match Disconnect*
+
+Example for changing rate-limit via RADIUS CoA
+
+.. code-block:: sh
+
+  echo "User-Name=test,Filter-Id=5000/4000" | radclient 10.1.1.2:3799 coa secret123
+
+Filter-Id=5000/4000 (means 5000Kbit down-stream rate and 4000Kbit up-stream rate)
+If attribute Filter-Id redefined, replace it in radius coa request
+
 Bandwidth Shaping
 ^^^^^^^^^^^^^^^^^
 
@@ -131,6 +162,7 @@ The command below enables it, assuming the RADIUS connection has been setup and
 Other attributes can be used, but they have to be in one of the dictionaries in /usr/share/accel-ppp/radius.
 
 
+
 Practical Configuration Examples
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^