diff options
Diffstat (limited to 'docs/configuration/firewall')
| -rw-r--r-- | docs/configuration/firewall/bridge.rst | 60 |
1 files changed, 58 insertions, 2 deletions
diff --git a/docs/configuration/firewall/bridge.rst b/docs/configuration/firewall/bridge.rst index 14b4e148..39956236 100644 --- a/docs/configuration/firewall/bridge.rst +++ b/docs/configuration/firewall/bridge.rst @@ -327,8 +327,64 @@ There are a lot of matching criteria against which the packet can be tested. Please refer to :doc:`IPv4</configuration/firewall/ipv4>` and :doc:`IPv6</configuration/firewall/ipv6>` matching criteria for more details. -Since bridges operates at layer 2, both matchers for IPv4 and IPv6 are -supported in bridge firewall configuration. Same applies for firewall groups. +Since bridges operats at layer 2, both matchers for IPv4 and IPv6 are +supported in bridge firewall configuration. Same applies to firewall groups. + +Same specific matching criteria that can be used in bridge firewall are +described in this section: + +.. cfgcmd:: set firewall bridge forward filter rule <1-999999> ethernet-type + [802.1q | 802.1ad | arp | ipv4 | ipv6] +.. cfgcmd:: set firewall bridge input filter rule <1-999999> ethernet-type + [802.1q | 802.1ad | arp | ipv4 | ipv6] +.. cfgcmd:: set firewall bridge output filter rule <1-999999> ethernet-type + [802.1q | 802.1ad | arp | ipv4 | ipv6] +.. cfgcmd:: set firewall bridge prerouting filter rule <1-999999> ethernet-type + [802.1q | 802.1ad | arp | ipv4 | ipv6] +.. cfgcmd:: set firewall bridge name <name> rule <1-999999> ethernet-type + [802.1q | 802.1ad | arp | ipv4 | ipv6] + + Match based on the Ethernet type of the packet. + +.. cfgcmd:: set firewall bridge forward filter rule <1-999999> vlan + ethernet-type [802.1q | 802.1ad | arp | ipv4 | ipv6] +.. cfgcmd:: set firewall bridge input filter rule <1-999999> vlan + ethernet-type [802.1q | 802.1ad | arp | ipv4 | ipv6] +.. cfgcmd:: set firewall bridge output filter rule <1-999999> vlan + ethernet-type [802.1q | 802.1ad | arp | ipv4 | ipv6] +.. cfgcmd:: set firewall bridge prerouting filter rule <1-999999> vlan + ethernet-type [802.1q | 802.1ad | arp | ipv4 | ipv6] +.. cfgcmd:: set firewall bridge name <name> rule <1-999999> vlan + ethernet-type [802.1q | 802.1ad | arp | ipv4 | ipv6] + + Match based on the Ethernet type of the packet when it is VLAN tagged. + +.. cfgcmd:: set firewall bridge forward filter rule <1-999999> vlan id + <0-4096> +.. cfgcmd:: set firewall bridge input filter rule <1-999999> vlan id + <0-4096> +.. cfgcmd:: set firewall bridge output filter rule <1-999999> vlan id + <0-4096> +.. cfgcmd:: set firewall bridge prerouting filter rule <1-999999> vlan id + <0-4096> +.. cfgcmd:: set firewall bridge name <name> rule <1-999999> vlan id + <0-4096> + + Match based on VLAN identifier. Range is also supported. + +.. cfgcmd:: set firewall bridge forward filter rule <1-999999> vlan priority + <0-7> +.. cfgcmd:: set firewall bridge input filter rule <1-999999> vlan priority + <0-7> +.. cfgcmd:: set firewall bridge output filter rule <1-999999> vlan priority + <0-7> +.. cfgcmd:: set firewall bridge prerouting filter rule <1-999999> vlan priority + <0-7> +.. cfgcmd:: set firewall bridge name <name> rule <1-999999> vlan priority + <0-7> + + Match based on VLAN priority (Priority Code Point - PCP). Range is also + supported. Use IP firewall =============== |